From e4f075af4e4ba79332c72809d3bb4ba6e2895253 Mon Sep 17 00:00:00 2001 From: notaz Date: Sat, 7 Jul 2012 21:45:00 +0300 Subject: spu: rework irq handling and loop reloading irq might be too early, but this seems to be better than was before. Special thanks to Ryphecha for some ideas again. --- plugins/dfsound/externals.h | 2 +- plugins/dfsound/freeze.c | 13 +++--- plugins/dfsound/registers.c | 6 +-- plugins/dfsound/spu.c | 105 +++++++++++++++++++++++--------------------- 4 files changed, 62 insertions(+), 64 deletions(-) (limited to 'plugins/dfsound') diff --git a/plugins/dfsound/externals.h b/plugins/dfsound/externals.h index 0146553..3cb388c 100644 --- a/plugins/dfsound/externals.h +++ b/plugins/dfsound/externals.h @@ -109,7 +109,7 @@ typedef struct unsigned int bRVBActive:1; // reverb active flag unsigned int bNoise:1; // noise active flag unsigned int bFMod:2; // freq mod (0=off, 1=sound channel, 2=freq channel) - unsigned int bJump:1; // last decoded block jumped + unsigned int prevflags:3; // flags from previous block int iLeftVolume; // left volume int iRightVolume; // right volume diff --git a/plugins/dfsound/freeze.c b/plugins/dfsound/freeze.c index d7e45b1..ec097c5 100644 --- a/plugins/dfsound/freeze.c +++ b/plugins/dfsound/freeze.c @@ -134,11 +134,11 @@ static void save_channel(SPUCHAN_orig *d, const SPUCHAN *s, int ch) d->bOn = !!(dwChannelOn & (1<bStop = s->bStop; d->bReverb = s->bReverb; - d->bIgnoreLoop = s->bJump; d->iActFreq = 1; d->iUsedFreq = 2; d->iLeftVolume = s->iLeftVolume; - d->bIgnoreLoop = 0; + // this one is nasty but safe, save compat is important + d->bIgnoreLoop = (s->prevflags ^ 2) << 1; d->iRightVolume = s->iRightVolume; d->iRawPitch = s->iRawPitch; d->s_1 = s->SB[27]; // yes it's reversed @@ -179,7 +179,7 @@ static void load_channel(SPUCHAN *d, const SPUCHAN_orig *s, int ch) d->bRVBActive = s->bRVBActive; d->bNoise = s->bNoise; d->bFMod = s->bFMod; - d->bJump = s->bIgnoreLoop; + d->prevflags = (s->bIgnoreLoop >> 1) ^ 2; d->ADSRX.State = s->ADSRX.State; d->ADSRX.AttackModeExp = s->ADSRX.AttackModeExp; d->ADSRX.AttackRate = s->ADSRX.AttackRate; @@ -232,11 +232,11 @@ long CALLBACK SPUfreeze(uint32_t ulFreezeMode,SPUFreeze_t * pF) pFO->spuAddr=spuAddr; if(pFO->spuAddr==0) pFO->spuAddr=0xbaadf00d; - dwChannelOn&=~dwPendingChanOff; - dwPendingChanOff=0; - for(i=0;is_chan[i],&s_chan[i],i); if(pFO->s_chan[i].pCurr) pFO->s_chan[i].pCurr-=(unsigned long)spuMemC; @@ -257,7 +257,6 @@ long CALLBACK SPUfreeze(uint32_t ulFreezeMode,SPUFreeze_t * pF) SPUplayADPCMchannel(&pF->xaS); xapGlobal=0; - dwPendingChanOff=0; if(!strcmp(pF->szSPUName,"PBOSS") && pF->ulFreezeVersion==5) LoadStateV5(pF); diff --git a/plugins/dfsound/registers.c b/plugins/dfsound/registers.c index 1a51cd7..45df2eb 100644 --- a/plugins/dfsound/registers.c +++ b/plugins/dfsound/registers.c @@ -173,10 +173,6 @@ void CALLBACK SPUwriteRegister(unsigned long reg, unsigned short val) //------------------------------------------------// case 14: // loop? s_chan[ch].pLoop=spuMemC+((val&~1)<<3); - if(s_chan[ch].bJump) - // real machine would be most likely still doing the last block and use new value for the jump; - // but we decode ahead a bit and already did the jump part, so compensate for that now. - s_chan[ch].pCurr=s_chan[ch].pLoop; break; //------------------------------------------------// } @@ -428,7 +424,7 @@ static void SoundOn(int start,int end,unsigned short val) s_chan[ch].bStop=0; s_chan[ch].pCurr=spuMemC+((regAreaGet(ch,6)&~1)<<3); // must be block aligned s_chan[ch].pLoop=spuMemC+((regAreaGet(ch,14)&~1)<<3); - s_chan[ch].bJump=0; + s_chan[ch].prevflags=2; dwNewChannel|=(1< start with more decoding else {s_chan[ch].spos=0x10000L;s_chan[ch].SB[31]=0;} // -> no/simple interpolation starts with one 44100 decoding + check_irq(ch, s_chan[ch].pCurr); // just in case + dwNewChannel&=~(1< turn everything off - dwPendingChanOff&=~(1< call main emu - ret = 1; + dwChannelOn&=~(1< turn everything off + s_chan[ch].bStop=1; + s_chan[ch].ADSRX.EnvelopeVol=0; } + + start = s_chan[ch].pLoop; } predict_nr=(int)start[0]; @@ -459,29 +466,22 @@ static int decode_block(int ch) decode_block_data(s_chan[ch].SB, start + 2, predict_nr, shift_factor); - //////////////////////////////////////////// flag handler - flags=(int)start[1]; if(flags&4) s_chan[ch].pLoop=start; // loop adress start+=16; - if(flags&1) // 1: stop/loop - { - if(!(flags&2)) - dwPendingChanOff|=1<= 0x80000) { - // most likely wrong + if (start - spuMemC >= 0x80000) start = spuMemC; - printf("ch%d oflow\n", ch); - } + + ret = check_irq(ch, start); s_chan[ch].pCurr = start; // store values for next cycle - s_chan[ch].bJump = flags & 1; + s_chan[ch].prevflags = flags; return ret; } @@ -491,24 +491,22 @@ static int skip_block(int ch) { unsigned char *start = s_chan[ch].pCurr; int flags = start[1]; - int ret = 0; - if(start == pSpuIrq) - { - do_irq(); - ret = 1; - } + if(s_chan[ch].prevflags & 1) + start = s_chan[ch].pLoop; if(flags & 4) s_chan[ch].pLoop = start; - s_chan[ch].pCurr += 16; + start += 16; if(flags & 1) - s_chan[ch].pCurr = s_chan[ch].pLoop; + start = s_chan[ch].pLoop; - s_chan[ch].bJump = flags & 1; - return ret; + s_chan[ch].pCurr = start; + s_chan[ch].prevflags = flags; + + return check_irq(ch, start); } #define make_do_samples(name, fmod_code, interp_start, interp1_code, interp2_code, interp_end) \ @@ -824,18 +822,15 @@ static int do_samples(int forced_updates) // an IRQ. Only problem: the "wait for cpu" option is kinda hard to do here // in some of Peops timer modes. So: we ignore this option here (for now). - if(pMixIrq) + if(pMixIrq && (spuCtrl&CTRL_IRQ) && pSpuIrq && pSpuIrq=pMixIrq+(ch*0x400) && pSpuIrqspuMemC+0x3ff) pMixIrq=spuMemC; } } @@ -863,6 +858,7 @@ static int do_samples(int forced_updates) void CALLBACK SPUasync(unsigned long cycle) { + static int old_ctrl; int forced_updates = 0; int do_update = 0; @@ -877,9 +873,16 @@ void CALLBACK SPUasync(unsigned long cycle) had_dma = 0; } - // once per frame should be fine (using a bit more because of BIAS) - if(cycles_since_update > PSXCLK/60 * 5/4) + if((spuCtrl&CTRL_IRQ) && (((spuCtrl^old_ctrl)&CTRL_IRQ) // irq was enabled + || cycles_since_update > PSXCLK/60 / 4)) { do_update = 1; + forced_updates = cycles_since_update / (PSXCLK/44100) / NSSIZE; + } + // with no irqs, once per frame should be fine (using a bit more because of BIAS) + else if(cycles_since_update > PSXCLK/60 * 5/4) + do_update = 1; + + old_ctrl = spuCtrl; if(do_update) do_samples(forced_updates); -- cgit v1.2.3