diff options
Diffstat (limited to 'backends/platform/PalmOS/Src/vibrate.h')
| -rw-r--r-- | backends/platform/PalmOS/Src/vibrate.h | 61 |
1 files changed, 0 insertions, 61 deletions
diff --git a/backends/platform/PalmOS/Src/vibrate.h b/backends/platform/PalmOS/Src/vibrate.h deleted file mode 100644 index 37604be5b7..0000000000 --- a/backends/platform/PalmOS/Src/vibrate.h +++ /dev/null @@ -1,61 +0,0 @@ -/********************************************************************** -** ** -** vibrate.h ** -** ** -** Definitions for setting/retrieving the state of the vibrator on ** -** PalmOS 4.x devices. These calls are not officially supported by ** -** Palm Inc and subsidiaries. It is not guaranteed that these calls ** -** will work at all or at least the same on every device. YOU ARE ** -** USING THESE ENTIRELY ON YOUR VERY OWN RISK ! ** -** ** -** Please send corrections to dseifert@dseifert.com ** -**********************************************************************/ - -#include <PalmOS.h> - -/* HwrVibrateAttributes takes three arguments: -** Boolean set Should the setting be set (1) or retrieved (0) -** UInt32 setting what should be set -** void* value pointer to the value to set, or to store the -** retrieved setting -*/ - -Err HwrVibrateAttributes(Boolean set, UInt32 setting, void *value) - SYS_TRAP(sysTrapHwrVibrateAttributes); - -/* to determine whether the vibrator is supported on a specific device, you -** need to make sure that you are running on PalmOS 4.x (so that the -** trap exists), that the attention manager exists and you need to check -** whether HwrVibrateAttributes(0, 1, &active) returns an error code of -** 0. ('active' is a Boolean). -*/ - - -/***************************************************************/ -/* For the second parameter, the following defines can be used */ -/***************************************************************/ - -/* *value points to a Boolean stating the state of the vibrator */ -#define kHwrVibrateActive 1 - -/* *value points to a UInt16, specifying the length of one cycle. -** value is in ticks (1/100 seconds) */ -#define kHwrVibrateRate 2 - -/* *value points to a UInt32, specifying the pattern of vibrating -** -** example: -** 0xFFFFFFFF stay on, no vibrating -** 0x0F0F0F0F vibrate four times in equal intervals -** 0xAAAAAAAA vibrate really fast (not recommended) -** 0x0F0F0000 vibrate twice, then pause -*/ -#define kHwrVibratePattern 3 - -/* *value points to a UInt16, specifying the delay between two -** cycles in ticks */ -#define kHwrVibrateDelay 4 - -/* *value points to a UInt16 specifying the amount of repeats. */ -#define kHwrVibrateRepeatCount 5 - |