diff options
Diffstat (limited to 'engines/tinsel/graphics.cpp')
-rw-r--r-- | engines/tinsel/graphics.cpp | 231 |
1 files changed, 123 insertions, 108 deletions
diff --git a/engines/tinsel/graphics.cpp b/engines/tinsel/graphics.cpp index 9b06b1a501..ef8a10221b 100644 --- a/engines/tinsel/graphics.cpp +++ b/engines/tinsel/graphics.cpp @@ -73,7 +73,7 @@ uint8* psxPJCRLEUnwinder(uint16 imageWidth, uint16 imageHeight, uint8 *srcIdx) { while (remainingBlocks) { // Repeat until all blocks are decompressed if (!controlBits) { - controlData = READ_LE_UINT16(srcIdx); + controlData = READ_16(srcIdx); srcIdx += 2; // If bit 15 of controlData is enabled, compression data is type 1. @@ -92,7 +92,7 @@ uint8* psxPJCRLEUnwinder(uint16 imageWidth, uint16 imageHeight, uint8 *srcIdx) { // If there is compression, we need to fetch an index // to be treated as "base" for compression. if (compressionType != 0) { - controlData = READ_LE_UINT16(srcIdx); + controlData = READ_16(srcIdx); srcIdx += 2; baseIndex = controlData; } @@ -114,7 +114,7 @@ uint8* psxPJCRLEUnwinder(uint16 imageWidth, uint16 imageHeight, uint8 *srcIdx) { switch (compressionType) { case 0: // No compression, plain copy of indexes while (decremTiles) { - WRITE_LE_UINT16(dstIdx, READ_LE_UINT16(srcIdx)); + WRITE_LE_UINT16(dstIdx, READ_16(srcIdx)); srcIdx += 2; dstIdx += 2; decremTiles--; @@ -212,6 +212,82 @@ static void t0WrtNonZero(DRAWOBJECT *pObj, uint8 *srcP, uint8 *destP, bool apply } /** + * Straight rendering with transparency support, Mac variant + */ +static void MacDrawTiles(DRAWOBJECT *pObj, uint8 *srcP, uint8 *destP, bool applyClipping) { + int yClip = 0; + + if (applyClipping) { + // Adjust the height down to skip any bottom clipping + pObj->height -= pObj->botClip; + yClip = pObj->topClip; + } + + // Simple RLE-like scheme: the two first bytes of each data chunk determine + // if bytes should be repeated or copied. + // Example: 10 00 00 20 will repeat byte 0x0 0x10 times, and will copy 0x20 + // bytes from the input stream afterwards + + // Vertical loop + for (int y = 0; y < pObj->height; ++y) { + // Get the start of the next line output + uint8 *tempDest = destP; + + int leftClip = applyClipping ? pObj->leftClip : 0; + int rightClip = applyClipping ? pObj->rightClip : 0; + + // Horizontal loop + for (int x = 0; x < pObj->width; ) { + byte repeatBytes = *srcP++; + + if (repeatBytes) { + uint clipAmount = MIN<int>(repeatBytes, leftClip); + leftClip -= clipAmount; + x += clipAmount; + + // Repeat of a given color + byte color = *srcP++; + int runLength = repeatBytes - clipAmount; + int rptLength = MAX(MIN(runLength, pObj->width - rightClip - x), 0); + if (yClip == 0) { + if (color != 0) + memset(tempDest, color, rptLength); + tempDest += rptLength; + } + + x += runLength; + } else { + // Copy a specified sequence length of pixels + byte copyBytes = *srcP++; + + uint clipAmount = MIN<int>(copyBytes, leftClip); + leftClip -= clipAmount; + x += clipAmount; + srcP += clipAmount; + + int runLength = copyBytes - clipAmount; + int rptLength = MAX(MIN(runLength, pObj->width - rightClip - x), 0); + if (yClip == 0) { + memmove(tempDest, srcP, rptLength); + tempDest += rptLength; + } + + int overflow = (copyBytes & 1); + x += runLength; + srcP += runLength + overflow; + } + } // horizontal loop + + // Move to next line + if (yClip > 0) + --yClip; + else + destP += SCREEN_WIDTH; + } // vertical loop +} + + +/** * Straight rendering with transparency support, PSX variant supporting also 4-BIT clut data */ static void PsxDrawTiles(DRAWOBJECT *pObj, uint8 *srcP, uint8 *destP, bool applyClipping, bool fourBitClut, uint32 psxSkipBytes, byte *psxMapperTable, bool transparency) { @@ -822,120 +898,59 @@ void DrawObject(DRAWOBJECT *pObj) { // Handle various draw types uint8 typeId = pObj->flags & 0xff; + int packType = pObj->flags >> 14; // TinselV2 - if (TinselV2) { - // Tinsel v2 decoders - // Initial switch statement for the different bit packing types - int packType = pObj->flags >> 14; - - if (packType == 0) { - // No color packing - switch (typeId) { - case 0x01: - case 0x11: - case 0x41: - case 0x51: - case 0x81: - case 0xC1: - t2WrtNonZero(pObj, srcPtr, destPtr, typeId >= 0x40, (typeId & 0x10) != 0); - break; - case 0x02: - case 0x42: - // This renderer called 'RlWrtAll', but is the same as t2WrtNonZero - t2WrtNonZero(pObj, srcPtr, destPtr, typeId >= 0x40, false); - break; - case 0x04: - case 0x44: - // WrtConst with/without clipping - WrtConst(pObj, destPtr, typeId == 0x44); - break; - case 0x08: - case 0x48: - WrtAll(pObj, srcPtr, destPtr, typeId >= 0x40); - break; - case 0x84: - case 0xC4: - // WrtTrans with/without clipping - WrtTrans(pObj, destPtr, typeId == 0xC4); - break; - default: - error("Unknown drawing type %d", typeId); - } - } else { - // 1 = 16 from 240 - // 2 = 16 from 224 - // 3 = variable color - if (packType == 1) pObj->baseCol = 0xF0; - else if (packType == 2) pObj->baseCol = 0xE0; - - PackedWrtNonZero(pObj, srcPtr, destPtr, (pObj->flags & DMA_CLIP) != 0, - (pObj->flags & DMA_FLIPH), packType); - } + if (TinselV2 && packType != 0) { + // Color packing for TinselV2 + + if (packType == 1) + pObj->baseCol = 0xF0; // 16 from 240 + else if (packType == 2) + pObj->baseCol = 0xE0; // 16 from 224 + // 3 = variable color - } else if (TinselV1PSX) { - // Tinsel v1 decoders, PSX specific variants + PackedWrtNonZero(pObj, srcPtr, destPtr, (pObj->flags & DMA_CLIP) != 0, + (pObj->flags & DMA_FLIPH), packType); + } else { switch (typeId) { - case 0x01: - case 0x41: - PsxDrawTiles(pObj, srcPtr, destPtr, typeId >= 0x40, psxFourBitClut, psxSkipBytes, psxMapperTable, true); - break; - case 0x08: - case 0x48: - PsxDrawTiles(pObj, srcPtr, destPtr, typeId >= 0x40, psxFourBitClut, psxSkipBytes, psxMapperTable, false); - break; - case 0x84: - case 0xC4: - // WrtTrans with/without clipping - WrtTrans(pObj, destPtr, typeId == 0xC4); - break; - case 0x04: - case 0x44: - // WrtConst with/without clipping - WrtConst(pObj, destPtr, typeId == 0x44); + case 0x01: // all versions, draw sprite without clipping + case 0x41: // all versions, draw sprite with clipping + case 0x02: // TinselV2, draw sprite without clipping + case 0x11: // TinselV2, draw sprite without clipping, flipped horizontally + case 0x42: // TinselV2, draw sprite with clipping + case 0x51: // TinselV2, draw sprite with clipping, flipped horizontally + case 0x81: // TinselV2, draw sprite with clipping + case 0xC1: // TinselV2, draw sprite with clipping + assert(TinselV2 || (typeId == 0x01 || typeId == 0x41)); + + if (TinselV2) + t2WrtNonZero(pObj, srcPtr, destPtr, typeId >= 0x40, (typeId & 0x10) != 0); + else if (TinselV1PSX) + PsxDrawTiles(pObj, srcPtr, destPtr, typeId == 0x41, psxFourBitClut, psxSkipBytes, psxMapperTable, true); + else if (TinselV1Mac) + MacDrawTiles(pObj, srcPtr, destPtr, typeId == 0x41); + else if (TinselV1) + WrtNonZero(pObj, srcPtr, destPtr, typeId == 0x41); + else if (TinselV0) + t0WrtNonZero(pObj, srcPtr, destPtr, typeId == 0x41); break; - default: - error("Unknown drawing type %d", typeId); - } - } else if (TinselV1) { - // Tinsel v1 decoders - switch (typeId) { - case 0x01: - case 0x08: - case 0x41: - case 0x48: - WrtNonZero(pObj, srcPtr, destPtr, typeId >= 0x40); + case 0x08: // draw background without clipping + case 0x48: // draw background with clipping + if (TinselV2 || TinselV1Mac || TinselV0) + WrtAll(pObj, srcPtr, destPtr, typeId == 0x48); + else if (TinselV1PSX) + PsxDrawTiles(pObj, srcPtr, destPtr, typeId == 0x48, psxFourBitClut, psxSkipBytes, psxMapperTable, false); + else if (TinselV1) + WrtNonZero(pObj, srcPtr, destPtr, typeId == 0x48); break; - - case 0x04: - case 0x44: - // WrtConst with/without clipping + case 0x04: // fill with constant color without clipping + case 0x44: // fill with constant color with clipping WrtConst(pObj, destPtr, typeId == 0x44); break; - - case 0x84: - case 0xC4: - // WrtTrans with/without clipping + case 0x84: // draw transparent surface without clipping + case 0xC4: // draw transparent surface with clipping WrtTrans(pObj, destPtr, typeId == 0xC4); break; - - default: - error("Unknown drawing type %d", typeId); - } - } else { - // Tinsel v0 decoders - switch (typeId) { - case 0x01: - case 0x41: - t0WrtNonZero(pObj, srcPtr, destPtr, typeId >= 0x40); - break; - case 0x08: - case 0x48: - WrtAll(pObj, srcPtr, destPtr, typeId >= 0x40); - break; - case 0x84: - case 0xC4: - WrtTrans(pObj, destPtr, (typeId & 0x40) != 0); - break; default: error("Unknown drawing type %d", typeId); } |