From dd5518d3c5afaefe8269f86e298529712a60121c Mon Sep 17 00:00:00 2001 From: Max Horn Date: Sun, 14 Feb 2010 01:54:21 +0000 Subject: Add support for samples > 32kb to Paula chip emulation code. In addition, the code got simplified considerably. Its behavior changed slightly due to this, but I think the old behavior was wrong. In any case, this may fix some bugs, or introduce regressions, or both. We'll see ;). svn-id: r48058 --- sound/mods/paula.cpp | 111 ++++++++++++++++++++-------------------------- sound/mods/paula.h | 25 ++++++----- sound/mods/protracker.cpp | 10 ++--- 3 files changed, 66 insertions(+), 80 deletions(-) (limited to 'sound') diff --git a/sound/mods/paula.cpp b/sound/mods/paula.cpp index 1f557e0ece..7f3b3eb199 100644 --- a/sound/mods/paula.cpp +++ b/sound/mods/paula.cpp @@ -57,7 +57,7 @@ void Paula::clearVoice(byte voice) { _voice[voice].lengthRepeat = 0; _voice[voice].period = 0; _voice[voice].volume = 0; - _voice[voice].offset = 0; + _voice[voice].offset = Offset(0); _voice[voice].dmaCount = 0; } @@ -77,17 +77,25 @@ int Paula::readBuffer(int16 *buffer, const int numSamples) { template -inline void mixBuffer(int16 *&buf, const int8 *data, frac_t &offset, frac_t rate, int end, byte volume, byte panning) { - for (int i = 0; i < end; i++) { - const int32 tmp = ((int32) data[fracToInt(offset)]) * volume; +inline int mixBuffer(int16 *&buf, const int8 *data, Paula::Offset &offset, frac_t rate, int neededSamples, uint bufSize, byte volume, byte panning) { + int samples; + for (samples = 0; samples < neededSamples && offset.int_off < bufSize; ++samples) { + const int32 tmp = ((int32) data[offset.int_off]) * volume; if (stereo) { *buf++ += (tmp * (255 - panning)) >> 7; *buf++ += (tmp * (panning)) >> 7; } else *buf++ += tmp; - offset += rate; + // Step to next source sample + offset.rem_off += rate; + if (offset.rem_off >= FRAC_ONE) { + offset.int_off += fracToInt(offset.rem_off); + offset.rem_off &= FRAC_LO_MASK; + } } + + return samples; } template @@ -112,78 +120,55 @@ int Paula::readBufferIntern(int16 *buffer, const int numSamples) { if (!_voice[voice].data || (_voice[voice].period <= 0)) continue; - // The Paula chip apparently run at 7.0937892 MHz. We combine this with - // the requested output sampling rate (typicall 44.1 kHz or 22.05 kHz) - // as well as the "period" of the channel we are processing right now, - // to compute the correct output 'rate'. + // The Paula chip apparently run at 7.0937892 MHz in the PAL + // version and at 7.1590905 MHz in the NTSC version. We divide this + // by the requested the requested output sampling rate _rate + // (typically 44.1 kHz or 22.05 kHz) obtaining the value _periodScale. + // This is then divided by the "period" of the channel we are + // processing, to obtain the correct output 'rate'. frac_t rate = doubleToFrac(_periodScale / _voice[voice].period); - // Cap the volume _voice[voice].volume = MIN((byte) 0x40, _voice[voice].volume); - // Cache some data (helps the compiler to optimize the code, by - // indirectly telling it that no data aliasing can occur). - frac_t offset = _voice[voice].offset; - frac_t sLen = intToFrac(_voice[voice].length); - const int8 *data = _voice[voice].data; - int dmaCount = _voice[voice].dmaCount; + + Channel &ch = _voice[voice]; int16 *p = buffer; - int end = 0; int neededSamples = nSamples; - assert(offset < sLen); - - // Compute the number of samples to generate; that is, either generate - // just as many as were requested, or until the buffer is used up. - // Note that dividing two frac_t yields an integer (as the denominators - // cancel out each other). - // Note that 'end' could be 0 here. No harm in that :-). - const int leftSamples = (int)((sLen - offset + rate - 1) / rate); - end = MIN(neededSamples, leftSamples); - mixBuffer(p, data, offset, rate, end, _voice[voice].volume, _voice[voice].panning); - neededSamples -= end; - - if (leftSamples > 0 && end == leftSamples) { - dmaCount++; - data = _voice[voice].data = _voice[voice].dataRepeat; - _voice[voice].length = _voice[voice].lengthRepeat; - // TODO: offset -= sLen; but make sure there is no way offset >= 2*sLen - offset &= FRAC_LO_MASK; + assert(ch.offset.int_off < ch.length); + + // Mix the generated samples into the output buffer + neededSamples -= mixBuffer(p, ch.data, ch.offset, rate, neededSamples, ch.length, ch.volume, ch.panning); + + // Wrap around if necessary + if (ch.offset.int_off >= ch.length) { + // Important: Wrap around the offset *before* updating the voice length. + // Otherwise, if length != lengthRepeat we would wrap incorrectly. + // Note: If offset >= 2*len ever occurs, the following would be wrong; + // instead of subtracting, we then should compute the modulus using "%=". + // Since that requires a division and is slow, and shouldn't be necessary + // in practice anyway, we only use subtraction. + ch.offset.int_off -= ch.length; + ch.dmaCount++; + + ch.data = ch.dataRepeat; + ch.length = ch.lengthRepeat; } // If we have not yet generated enough samples, and looping is active: loop! - if (neededSamples > 0 && _voice[voice].length > 2) { - sLen = intToFrac(_voice[voice].length); - - // If the "rate" exceeds the sample rate, we would have to perform constant - // wrap arounds. So, apply the first step of the euclidean algorithm to - // achieve the same more efficiently: Take rate modulo sLen - // TODO: This messes up dmaCount and shouldnt happen? - if (sLen < rate) - warning("Paula: length %d is lesser than rate", _voice[voice].length); -// rate %= sLen; - + if (neededSamples > 0 && ch.length > 2) { // Repeat as long as necessary. while (neededSamples > 0) { - // TODO: offset -= sLen; but make sure there is no way offset >= 2*sLen - offset &= FRAC_LO_MASK; - dmaCount++; - // Compute the number of samples to generate (see above) and mix 'em. - end = MIN(neededSamples, (int)((sLen - offset + rate - 1) / rate)); - mixBuffer(p, data, offset, rate, end, _voice[voice].volume, _voice[voice].panning); - neededSamples -= end; + // Mix the generated samples into the output buffer + neededSamples -= mixBuffer(p, ch.data, ch.offset, rate, neededSamples, ch.length, ch.volume, ch.panning); + + if (ch.offset.int_off >= ch.length) { + // Wrap around. See also the note above. + ch.offset.int_off -= ch.length; + ch.dmaCount++; + } } - - if (offset < sLen) - dmaCount--; - else - offset &= FRAC_LO_MASK; - } - // Write back the cached data - _voice[voice].offset = offset; - _voice[voice].dmaCount = dmaCount; - } buffer += _stereo ? nSamples * 2 : nSamples; _curInt -= nSamples; diff --git a/sound/mods/paula.h b/sound/mods/paula.h index 0cea60c264..aa3d5b4ab9 100644 --- a/sound/mods/paula.h +++ b/sound/mods/paula.h @@ -49,6 +49,14 @@ public: kNtscPauleClock = kNtscSystemClock / 2 }; + /* TODO: Document this */ + struct Offset { + uint int_off; // integral part of the offset + frac_t rem_off; // fractional part of the offset, at least 0 and less than 1 + + explicit Offset(int off = 0) : int_off(off), rem_off(0) {} + }; + Paula(bool stereo = false, int rate = 44100, uint interruptFreq = 0); ~Paula(); @@ -83,7 +91,7 @@ protected: uint32 lengthRepeat; int16 period; byte volume; - frac_t offset; + Offset offset; byte panning; // For stereo mixing: 0 = far left, 255 = far right int dmaCount; }; @@ -119,7 +127,7 @@ protected: ch.data = ch.dataRepeat; ch.length = ch.lengthRepeat; // actually first 2 bytes are dropped? - ch.offset = intToFrac(0); + ch.offset = Offset(0); // ch.period = ch.periodRepeat; } @@ -147,30 +155,23 @@ protected: void setChannelData(uint8 channel, const int8 *data, const int8 *dataRepeat, uint32 length, uint32 lengthRepeat, int32 offset = 0) { assert(channel < NUM_VOICES); - // For now, we only support 32k samples, as we use 16bit fixed point arithmetics. - // If this ever turns out to be a problem, we can still enhance this code. - assert(0 <= offset && offset < 32768); - assert(length < 32768); - assert(lengthRepeat < 32768); - Channel &ch = _voice[channel]; ch.dataRepeat = data; ch.lengthRepeat = length; enableChannel(channel); - ch.offset = intToFrac(offset); + ch.offset = Offset(offset); ch.dataRepeat = dataRepeat; ch.lengthRepeat = lengthRepeat; } - void setChannelOffset(byte channel, frac_t offset) { + void setChannelOffset(byte channel, Offset offset) { assert(channel < NUM_VOICES); - assert(0 <= offset); _voice[channel].offset = offset; } - frac_t getChannelOffset(byte channel) { + Offset getChannelOffset(byte channel) { assert(channel < NUM_VOICES); return _voice[channel].offset; } diff --git a/sound/mods/protracker.cpp b/sound/mods/protracker.cpp index f86ac254a8..797b4c417d 100644 --- a/sound/mods/protracker.cpp +++ b/sound/mods/protracker.cpp @@ -63,7 +63,7 @@ private: struct { byte sample; uint16 period; - frac_t offset; + Offset offset; byte vol; byte finetune; @@ -195,7 +195,7 @@ void ProtrackerStream::updateRow() { _track[track].period = _module.noteToPeriod(note.note, _track[track].finetune); else _track[track].period = note.period; - _track[track].offset = 0; + _track[track].offset = Offset(0); } } @@ -241,7 +241,7 @@ void ProtrackerStream::updateRow() { break; case 0x9: // Set sample offset if (exy) { - _track[track].offset = intToFrac(exy * 256); + _track[track].offset = Offset(exy * 256); setChannelOffset(track, _track[track].offset); } break; @@ -382,12 +382,12 @@ void ProtrackerStream::updateEffects() { break; // Pattern loop case 0x9: // Retrigger note if (ey && (_tick % ey) == 0) - _track[track].offset = 0; + _track[track].offset = Offset(0); break; case 0xD: // Delay sample if (_tick == _track[track].delaySampleTick) { _track[track].sample = _track[track].delaySample; - _track[track].offset = 0; + _track[track].offset = Offset(0); if (_track[track].sample) _track[track].vol = _module.sample[_track[track].sample - 1].vol; } -- cgit v1.2.3