ScummVM 3DS README ------------------------------------------------------------------------ Table of Contents: ------------------ [1.0) Installation](#10-installation) * [1.1 3DSX installation](#11-3dsx-installation) * [1.2 CIA installation](#12-cia-installation) [2.0) Controls](#20-controls) * [2.1 Default key mappings](#21-default-key-mappings) * [2.2 Hover mode](#22-hover-mode) * [2.3 Drag mode](#23-drag-mode) * [2.4 Magnify mode](#24-magnify-mode) [3.0) Supported Games](#30-supported-games) [4.0) Compiling](#40-compiling) * [4.1 Prerequisites](#41-prerequisites) * * [4.1.1 Compiling third-party libraries](#411-compiling-third-party-libraries) * * [4.1.2 Manually setting up the environment](#412-manually-setting-up-the-environment) * [4.2 Compiling ScummVM](#42-compiling-scummvm) 1.0) Installation ----------------- There are two possible formats to be used: 3DSX and CIA. The 3DSX format is considered more ethical because it does not make use of invalid title IDs, which get logged. It is also compatible with homebrew loading methods that do not involve CFW. The 3DSX format is exclusively used by the Homebrew Launcher and its derivatives. The CIA format can be installed directly to the 3DS home menu and can be launched using any CFW (Custom Firmware) of your choice. Installing the Homebrew Launcher or any CFW is beyond the scope of this README. 1.1) 3DSX installation ---------------- You need to merely extract the ScummVM 3DSX files to your SD card so that all files reside in the `/3ds/scummvm/` directory. It can then be launched by Homebrew Launcher or a similar implementation. 1.2) CIA installation --------------------- The CIA format requires a DSP binary dump saved on your SD card as `/3ds/dspfirm.cdc` for proper audio support. You can search online to find software to dump this. Not having this file will cause many problems with games that need audio, sometimes even crashing, so this is NOT considered optional. Using any CIA installation software (search elsewhere for that), you need to install the `scummvm.cia` file. 2.0) Controls ------------- 2.1) Default key mappings ------------------------- The D-Pad and A/B/X/Y buttons have mirrored usage. So they do the same things depending on if you're right or left-handed. | Buttons | Function | |------------|--------------------------------| | A / D-left | Left-click | | X / D-up | Right-click | | B / D-down | ESC (skips cutscenes and such) | | Y / D-right| Use virtual keyboard | | L | Toggle magnify mode on/off | | R | Toggle hover/drag modes | | Start | Open game menu | | Select | Open 3DS config menu | | Circle Pad | Move the cursor | 2.2) Hover mode --------------- When you use the touchscreen, you are simulating the mere moving of the mouse. You can click only with taps, meaning it is impossible to drag stuff or hold down a mouse button without using buttons mapped to right/left-click. 2.3) Drag mode -------------- Every time you touch and release the touchscreen, you are simulating the click and release of the mouse buttons. At the moment, this is only a left-click. 2.4) Magnify mode ----------------- Due to the low resolutions of the 3DS's two screens (400x240 for the top, and 320x240 for the bottom), games that run at a higher resolution will inevitably lose some visual detail from being scaled down. This can result in situations where essential information is undiscernable, such as text. Magnify mode increases the scale factor of the top screen back to 1; the bottom screen remains unchanged. The touchscreen can then be used to change which part of the game display is being magnified. This can all be done even in situations where the cursor is disabled, such as during full-motion video (FMV) segments. When activating magnify mode, touchscreen controls are automatically switched to hover mode; this is to reduce the risk of the user accidentally inputting a click when changing the magnified area via dragging the stylus. Clicking can still be done at will as in normal hover mode. Turning off magnify mode will revert controls back to what was being used previously (ex: if drag mode was in use prior to activating magnify mode, drag mode will be reactivated upon exiting magnify mode), as well as restore the top screen's previous scale factor. Currently magnify mode can only be used when the following conditions are met: - In the 3DS config menu, "Use Screen" is set to "Both" - A game is currently being played - The horizontal and/or vertical resolution in-game is greater than that of the top screen Magnify mode cannot be used in the Launcher menu. 3.0) Supported Games -------------------- The full game engine compatibility list can be found here: https://scummvm.org/compatibility/ While all the above games should run on the 3DS (report if they do not), there are many games which are unplayable due to the lack of CPU speed on the 3DS. So if you play any games that run really slow, this is not considered a bug, but rather a hardware limitation. Though possible GPU optimizations are always in the works. The New 3DS console has much better performance, but there are still many newer and high-resolution games that cannot be played. A list of these unplayable games and game engines will eventually be listed here. 4.0) Compiling -------------- 4.1) Prerequisites ------------------ - Latest version of devkitPro, which comes with devkitARM and `libctru` - `citro3d` thorugh devkitPro's pacman - Optional: You should compile third-party libraries for the 3ds (commonly referred to as portlibs in the devkitPRO community). Some games requires these to operate properly. 4.1.1) Compiling third-party libraries -------------------------------------- It is strongly recommended that you use devkitPro's pacman in order to get the most recent portlibs for your build. The following libraries can be downloaded with pacman: | Library | Package | ----------------|------------------------ | zlib | 3ds-zlib | | libpng | 3ds-libpng | | libjpeg | 3ds-libjpeg-turbo | | freetype2 | 3ds-freetype | | libmad | 3ds-libmad | | libogg | 3ds-libogg | | tremor | 3ds-libvorbisidec | | flac | 3ds-flac | | curl | 3ds-curl | At the moment of writing, `faad` is not in the devkitPro 3DS pacman repository. It can be compiled by following the instructions in the section below, in case it cannot be found through pacman. The following pacman packages are also recommended: - `3ds-dev` - `devkitpro-pkgbuild-helpers` Once you have the `devkitpro-pkgbuild-helpers` package, you should be able to find the following scripts in your `/opt/devkitpro` folder: - `devkitarm.sh` - `3dsvars.sh` Run them one after the other with `source` in order to setup your environment variables for cross-compiling: ``` $ source /opt/devkitpro/devkitarm.sh $ source /opt/devkitpro/3dsvars.sh ``` After that, you can download the libraries you want to cross compile, run any autoconf scripts that they may have, and then they can usually be built with the following steps from their source directory: ``` $ mkdir -p $PORTLIBS $ ./configure --prefix=$PORTLIBS --host=arm-none-eabi --disable-shared \ --enable-static $ make $ make install ``` Most libraries used can be compiled with same commands and configuration flags. 4.1.2) Manually setting up the environment ------------------------------------------ In case you don't have the helpers package downloaded, you can use the following to set-up your environment variables. It is assumed that you have these variables already set up. If not, then do so: - DEVKITPRO Your root devkitPro directory - DEVKITARM Your root devkitARM directory (probably same as $DEVKITPRO/devkitARM) - CTRULIB Your root libctru directory (probably same as $DEVKITPRO/libctru) In the source directory of the library: ``` $ export PORTLIBS=$DEVKITPRO/portlibs/3ds $ export PATH=$DEVKITARM/bin:$PATH $ export PKG_CONFIG_PATH=$PORTLIBS/lib/pkgconfig $ export PKG_CONFIG_LIBDIR=$PORTLIBS/lib/pkgconfig $ export CFLAGS="-g -march=armv6k -mtune=mpcore -mfloat-abi=hard -O2 -mword-relocations -ffunction-sections -fdata-sections" $ export CPPFLAGS="-I$PORTLIBS/include -I$CTRULIB/include" $ export LDFLAGS="-L$PORTLIBS/lib" ``` 4.2) Compiling ScummVM ---------------------- Do the following in a fresh terminal. In case you get a "compiler not found" message, add the toolchain's executables to your PATH: ```$ export PATH=$DEVKITARM/bin:$PATH``` Note: In more recent codebases of ScummVM, you may or may not need to set the following beforehand: ```$ export PKG_CONFIG_LIBDIR=$PORTLIBS/lib/pkgconfig``` See above for $PORTLIBS. ScummVM doesn't provide the CA certificates bundle required by the cloud synchronization features. You need to download it from the curl website: https://curl.haxx.se/ca/cacert.pem, and instruct the build system to package it in the binary: ```$ export DIST_3DS_EXTRA_FILES=/path/to/cacert.pem``` The name of the file must be `cacert.pem`. From the root of the scummvm repository: ``` $ ./configure --host=3ds --enable-plugins --default-dynamic $ make ``` Additionally compile to specific formats to be used on the 3DS: ``` $ make scummvm.3dsx $ make scummvm.cia ``` Assuming everything was successful, you'll be able to find the binary files in the root of your scummvm folder. Note: for the CIA format, you will need the 'makerom' and 'bannertool' tools which are not supplied with devkitPro. Note: using dynamic plugins as suggested is required when building with most or all of the game engines enabled in order to keep the memory usage low and avoid stability issues.