/* ScummVM - Graphic Adventure Engine
 *
 * ScummVM is the legal property of its developers, whose names
 * are too numerous to list here. Please refer to the COPYRIGHT
 * file distributed with this source distribution.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.

 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.

 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
 *
 * $URL$
 * $Id$
 *
 */

/*
 * GP2X: Graphics handling.
 *
 */

#include "backends/platform/gp2x/gp2x-common.h"
#include "common/util.h"
#include "graphics/font.h"
#include "graphics/fontman.h"
#include "graphics/scaler.h"
#include "graphics/surface.h"

static const OSystem::GraphicsMode s_supportedGraphicsModes[] = {
	{"GP2X Graphics Mode", "1x", GFX_NORMAL},
	{0, 0, 0}
};

// Table of relative scalers magnitudes
// [definedScale - 1][_scaleFactor - 1]
static ScalerProc *scalersMagn[3][3] = {
	{ Normal1x, Normal1x, Normal1x },
	{ Normal1x, Normal1x, Normal1x },
	{ Normal1x, Normal1x, Normal1x }
};

static const int s_gfxModeSwitchTable[][4] = {
		{ GFX_NORMAL, GFX_DOUBLESIZE, GFX_TRIPLESIZE, -1 },
		{ GFX_NORMAL, GFX_ADVMAME2X, GFX_ADVMAME3X, -1 },
		{ GFX_NORMAL, GFX_HQ2X, GFX_HQ3X, -1 },
		{ GFX_NORMAL, GFX_2XSAI, -1, -1 },
		{ GFX_NORMAL, GFX_SUPER2XSAI, -1, -1 },
		{ GFX_NORMAL, GFX_SUPEREAGLE, -1, -1 },
		{ GFX_NORMAL, GFX_TV2X, -1, -1 },
		{ GFX_NORMAL, GFX_DOTMATRIX, -1, -1 }
	};

static int cursorStretch200To240(uint8 *buf, uint32 pitch, int width, int height, int srcX, int srcY, int origSrcY);

const OSystem::GraphicsMode *OSystem_GP2X::getSupportedGraphicsModes() const {
	return s_supportedGraphicsModes;
}

int OSystem_GP2X::getDefaultGraphicsMode() const {
	return GFX_NORMAL;
}

void OSystem_GP2X::beginGFXTransaction(void) {
	assert (_transactionMode == kTransactionNone);

	_transactionMode = kTransactionActive;

	_transactionDetails.modeChanged = false;
	_transactionDetails.sizeChanged = false;
	_transactionDetails.arChanged = false;
	_transactionDetails.fsChanged = false;

	_transactionDetails.needHotswap = false;
	_transactionDetails.needUpdatescreen = false;
	_transactionDetails.needUnload = false;

	_transactionDetails.normal1xScaler = false;
}

void OSystem_GP2X::endGFXTransaction(void) {
	// for each engine we run initCommonGFX() as first thing in the transaction
	// and initSize() is called later. If user runs launcher at 320x200 with
	// 2x overlay, setting to Nomral1x sclaler in that case will be suppressed
	// and backend is forced to 2x
	//
	// This leads to bad results such as 1280x960 window for 640x480 engines.
	// To prevent that we rerun setGraphicsMode() if there was 1x scaler request
	if (_transactionDetails.normal1xScaler)
		setGraphicsMode(GFX_NORMAL);

	assert (_transactionMode == kTransactionActive);

	_transactionMode = kTransactionCommit;
	if (_transactionDetails.modeChanged)
		setGraphicsMode(_transactionDetails.mode);

	if (_transactionDetails.sizeChanged)
		initSize(_transactionDetails.w, _transactionDetails.h);

	if (_transactionDetails.arChanged)
		setAspectRatioCorrection(_transactionDetails.ar);

	if (_transactionDetails.needUnload) {
		unloadGFXMode();
		loadGFXMode();
		clearOverlay();
	} else {
		if (!_transactionDetails.fsChanged) {
			if (_transactionDetails.needHotswap)
				hotswapGFXMode();
			else if (_transactionDetails.needUpdatescreen)
				internUpdateScreen();
		}
	}

	if (_transactionDetails.fsChanged)
		setFullscreenMode(_transactionDetails.fs);

	_transactionMode = kTransactionNone;
}

bool OSystem_GP2X::setGraphicsMode(int mode) {
	Common::StackLock lock(_graphicsMutex);

	int newScaleFactor = 1;
	ScalerProc *newScalerProc;

	mode = GFX_NORMAL;
	newScaleFactor = 1;
	newScalerProc = Normal1x;

	_transactionDetails.normal1xScaler = (mode == GFX_NORMAL);

	_mode = mode;
	_scalerProc = newScalerProc;

	if (_transactionMode == kTransactionActive) {
		_transactionDetails.mode = mode;
		_transactionDetails.modeChanged = true;

		if (newScaleFactor != _scaleFactor) {
			_transactionDetails.needHotswap = true;
			_scaleFactor = newScaleFactor;
		}

		_transactionDetails.needUpdatescreen = true;

		return true;
	}

	// NOTE: This should not be executed at transaction commit
	//   Otherwise there is some unsolicited setGraphicsMode() call
	//   which should be properly removed
	if (newScaleFactor != _scaleFactor) {
		assert(_transactionMode != kTransactionCommit);

		_scaleFactor = newScaleFactor;
		hotswapGFXMode();
	}

	// Determine the "scaler type", i.e. essentially an index into the
	// s_gfxModeSwitchTable array defined in events.cpp.
	if (_mode != GFX_NORMAL) {
		for (int i = 0; i < ARRAYSIZE(s_gfxModeSwitchTable); i++) {
			if (s_gfxModeSwitchTable[i][1] == _mode || s_gfxModeSwitchTable[i][2] == _mode) {
				_scalerType = i;
				break;
			}
		}
	}

	if (!_screen)
		return true;

	// Blit everything to the screen
	_forceFull = true;

	// Even if the old and new scale factors are the same, we may have a
	// different scaler for the cursor now.
	blitCursor();

	if (_transactionMode != kTransactionCommit)
		internUpdateScreen();

	// Make sure that an Common::EVENT_SCREEN_CHANGED gets sent later
	_modeChanged = true;

	return true;
}

int OSystem_GP2X::getGraphicsMode() const {
	assert (_transactionMode == kTransactionNone);
	return _mode;
}

void OSystem_GP2X::initSize(uint w, uint h){
	// Avoid redundant res changes
	if ((int)w == _screenWidth && (int)h == _screenHeight &&
		_transactionMode != kTransactionCommit)
		return;

	_screenWidth = w;
	_screenHeight = h;

	_cksumNum = (_screenWidth * _screenHeight / (8 * 8));

	if (_transactionMode == kTransactionActive) {
		_transactionDetails.w = w;
		_transactionDetails.h = h;
		_transactionDetails.sizeChanged = true;

		_transactionDetails.needUnload = true;

		return;
	}

	free(_dirtyChecksums);
	_dirtyChecksums = (uint32 *)calloc(_cksumNum * 2, sizeof(uint32));

	if (_transactionMode != kTransactionCommit) {
		unloadGFXMode();
		loadGFXMode();

		// if initSize() gets called in the middle, overlay is not transparent
		clearOverlay();
	}
}

void OSystem_GP2X::loadGFXMode() {
	assert(_inited);
	_forceFull = true;
	_modeFlags |= DF_UPDATE_EXPAND_1_PIXEL;

	int hwW, hwH;

	_overlayWidth = _screenWidth * _scaleFactor;
	_overlayHeight = _screenHeight * _scaleFactor;

	if (_screenHeight != 200)
		_adjustAspectRatio = false;

	if (_adjustAspectRatio)
		_overlayHeight = real2Aspect(_overlayHeight);

	hwW = _screenWidth * _scaleFactor;
	hwH = effectiveScreenHeight();

	//
	// Create the surface that contains the 8 bit game data
	//
	_screen = SDL_CreateRGBSurface(SDL_SWSURFACE, _screenWidth, _screenHeight, 8, 0, 0, 0, 0);
	if (_screen == NULL)
		error("allocating _screen failed");

	//
	// Create the surface that contains the graphics in 16 bit mode
	//

	// FIXME: Hack for GP2X SDL querks.
	if (_screenWidth <= 320) {
		_hwscreen = SDL_SetVideoMode(320, 240, 16, SDL_FULLSCREEN|SDL_SWSURFACE);
	} else {
		_hwscreen = SDL_SetVideoMode(_screenWidth, _screenHeight, 16, SDL_FULLSCREEN|SDL_SWSURFACE);
	}

	if (_hwscreen == NULL) {
		warning("SDL_SetVideoMode says we can't switch to that mode");
		quit();
	}

	// GP2X Specific, must be called after any SDL_SetVideoMode to ensure the hardware cursor is off.
	// Note: On the GP2X SDL_SetVideoMode recalls SDL_Init().
	SDL_ShowCursor(SDL_DISABLE);


	//
	// Create the surface used for the graphics in 16 bit before scaling, and also the overlay
	//

	// Distinguish 555 and 565 mode
	if (_hwscreen->format->Rmask == 0x7C00)
		InitScalers(555);
	else
		InitScalers(565);

	// Need some extra bytes around when using 2xSaI
	_tmpscreen = SDL_CreateRGBSurface(SDL_SWSURFACE, _screenWidth + 3, _screenHeight + 3,
						16,
						_hwscreen->format->Rmask,
						_hwscreen->format->Gmask,
						_hwscreen->format->Bmask,
						_hwscreen->format->Amask);

	if (_tmpscreen == NULL)
		error("allocating _tmpscreen failed");

	_overlayscreen = SDL_CreateRGBSurface(SDL_SWSURFACE, _overlayWidth, _overlayHeight,
						16,
						_hwscreen->format->Rmask,
						_hwscreen->format->Gmask,
						_hwscreen->format->Bmask,
						_hwscreen->format->Amask);

	if (_overlayscreen == NULL)
		error("allocating _overlayscreen failed");

	_tmpscreen2 = SDL_CreateRGBSurface(SDL_SWSURFACE, _overlayWidth + 3, _overlayHeight + 3,
						16,
						_hwscreen->format->Rmask,
						_hwscreen->format->Gmask,
						_hwscreen->format->Bmask,
						_hwscreen->format->Amask);

	if (_tmpscreen2 == NULL)
		error("allocating _tmpscreen2 failed");

	_osdSurface = SDL_CreateRGBSurface(SDL_SWSURFACE | SDL_RLEACCEL | SDL_SRCCOLORKEY | SDL_SRCALPHA,
						_hwscreen->w,
						_hwscreen->h,
						16,
						_hwscreen->format->Rmask,
						_hwscreen->format->Gmask,
						_hwscreen->format->Bmask,
						_hwscreen->format->Amask);
	if (_osdSurface == NULL)
		error("allocating _osdSurface failed");
	SDL_SetColorKey(_osdSurface, SDL_RLEACCEL | SDL_SRCCOLORKEY | SDL_SRCALPHA, kOSDColorKey);

	// keyboard cursor control, some other better place for it?
	_km.x_max = _screenWidth * _scaleFactor - 1;
	_km.y_max = effectiveScreenHeight() - 1;
	_km.delay_time = 25;
	_km.last_time = 0;
}

void OSystem_GP2X::unloadGFXMode() {
	if (_screen) {
		SDL_FreeSurface(_screen);
		_screen = NULL;
	}

	if (_hwscreen) {
		SDL_FreeSurface(_hwscreen);
		_hwscreen = NULL;
	}

	if (_tmpscreen) {
		SDL_FreeSurface(_tmpscreen);
		_tmpscreen = NULL;
	}

	if (_tmpscreen2) {
		SDL_FreeSurface(_tmpscreen2);
		_tmpscreen2 = NULL;
	}

	if (_overlayscreen) {
		SDL_FreeSurface(_overlayscreen);
		_overlayscreen = NULL;
	}

	if (_osdSurface) {
		SDL_FreeSurface(_osdSurface);
		_osdSurface = NULL;
	}
}

void OSystem_GP2X::hotswapGFXMode() {
	if (!_screen)
		return;

	// Keep around the old _screen & _overlayscreen so we can restore the screen data
	// after the mode switch.
	SDL_Surface *old_screen = _screen;
	SDL_Surface *old_overlayscreen = _overlayscreen;

	// Release the HW screen surface
	SDL_FreeSurface(_hwscreen);

	SDL_FreeSurface(_tmpscreen);
	SDL_FreeSurface(_tmpscreen2);

	// Release the OSD surface
	SDL_FreeSurface(_osdSurface);

	// Setup the new GFX mode
	loadGFXMode();

	// reset palette
	SDL_SetColors(_screen, _currentPalette, 0, 256);

	// Restore old screen content
	SDL_BlitSurface(old_screen, NULL, _screen, NULL);
	SDL_BlitSurface(old_overlayscreen, NULL, _overlayscreen, NULL);

	// Free the old surfaces
	SDL_FreeSurface(old_screen);
	SDL_FreeSurface(old_overlayscreen);

	// Update cursor to new scale
	blitCursor();

	// Blit everything to the screen
	internUpdateScreen();

	// Make sure that an Common::EVENT_SCREEN_CHANGED gets sent later
	_modeChanged = true;
}

void OSystem_GP2X::updateScreen() {
	assert (_transactionMode == kTransactionNone);

	Common::StackLock lock(_graphicsMutex);	// Lock the mutex until this function ends

	internUpdateScreen();
}

void OSystem_GP2X::internUpdateScreen() {
	SDL_Surface *srcSurf, *origSurf;
	int height, width;
	ScalerProc *scalerProc;
	int scale1;

#if defined (DEBUG) && ! defined(_WIN32_WCE) // definitions not available for non-DEBUG here. (needed this to compile in SYMBIAN32 & linux?)
	assert(_hwscreen != NULL);
	assert(_hwscreen->map->sw_data != NULL);
#endif

	// If the shake position changed, fill the dirty area with blackness
	if (_currentShakePos != _newShakePos) {
		SDL_Rect blackrect = {0, 0, _screenWidth * _scaleFactor, _newShakePos * _scaleFactor};

		if (_adjustAspectRatio && !_overlayVisible)
			blackrect.h = real2Aspect(blackrect.h - 1) + 1;

		SDL_FillRect(_hwscreen, &blackrect, 0);

		_currentShakePos = _newShakePos;

		_forceFull = true;
	}

	// Check whether the palette was changed in the meantime and update the
	// screen surface accordingly.
	if (_screen && _paletteDirtyEnd != 0) {
		SDL_SetColors(_screen, _currentPalette + _paletteDirtyStart,
			_paletteDirtyStart,
			_paletteDirtyEnd - _paletteDirtyStart);

		_paletteDirtyEnd = 0;

		_forceFull = true;
	}
	// OSD visible (i.e. non-transparent)?
	if (_osdAlpha != SDL_ALPHA_TRANSPARENT) {
		// Updated alpha value
		const int diff = SDL_GetTicks() - _osdFadeStartTime;
		if (diff > 0) {
			if (diff >= kOSDFadeOutDuration) {
				// Back to full transparency
				_osdAlpha = SDL_ALPHA_TRANSPARENT;
			} else {
				// Do a linear fade out...
				const int startAlpha = SDL_ALPHA_TRANSPARENT + kOSDInitialAlpha * (SDL_ALPHA_OPAQUE - SDL_ALPHA_TRANSPARENT) / 100;
				_osdAlpha = startAlpha + diff * (SDL_ALPHA_TRANSPARENT - startAlpha) / kOSDFadeOutDuration;
			}
			SDL_SetAlpha(_osdSurface, SDL_RLEACCEL | SDL_SRCCOLORKEY | SDL_SRCALPHA, _osdAlpha);
			_forceFull = true;
		}
	}

	if (!_overlayVisible) {
		origSurf = _screen;
		srcSurf = _tmpscreen;
		width = _screenWidth;
		height = _screenHeight;
		scalerProc = _scalerProc;
		scale1 = _scaleFactor;
	} else {
		origSurf = _overlayscreen;
		srcSurf = _tmpscreen2;
		width = _overlayWidth;
		height = _overlayHeight;
		scalerProc = Normal1x;

		scale1 = 1;
	}

	// Force a full redraw if requested
	if (_forceFull) {
		_numDirtyRects = 1;
		_dirtyRectList[0].x = 0;
		_dirtyRectList[0].y = 0;
		_dirtyRectList[0].w = width;
		_dirtyRectList[0].h = height;
	} else
		undrawMouse();

	// Only draw anything if necessary
	if (_numDirtyRects > 0) {

		SDL_Rect *r;
		SDL_Rect dst;
		uint32 srcPitch, dstPitch;
		SDL_Rect *lastRect = _dirtyRectList + _numDirtyRects;

		if (scalerProc == Normal1x && !_adjustAspectRatio && 0) {
			for (r = _dirtyRectList; r != lastRect; ++r) {
				dst = *r;

				dst.y += _currentShakePos;
				if (SDL_BlitSurface(origSurf, r, _hwscreen, &dst) != 0)
					error("SDL_BlitSurface failed: %s", SDL_GetError());
			}
		} else {
			for (r = _dirtyRectList; r != lastRect; ++r) {
				dst = *r;
				dst.x++;	// Shift rect by one since 2xSai needs to acces the data around
				dst.y++;	// any pixel to scale it, and we want to avoid mem access crashes.

				if (SDL_BlitSurface(origSurf, r, srcSurf, &dst) != 0)
					error("SDL_BlitSurface failed: %s", SDL_GetError());
			}

			SDL_LockSurface(srcSurf);
			SDL_LockSurface(_hwscreen);

			srcPitch = srcSurf->pitch;
			dstPitch = _hwscreen->pitch;

			for (r = _dirtyRectList; r != lastRect; ++r) {
				register int dst_y = r->y + _currentShakePos;
				register int dst_h = 0;
				register int orig_dst_y = 0;
				register int rx1 = r->x * scale1;

				if (dst_y < height) {
					dst_h = r->h;
					if (dst_h > height - dst_y)
						dst_h = height - dst_y;

					orig_dst_y = dst_y;
					dst_y = dst_y * scale1;

					if (_adjustAspectRatio && !_overlayVisible)
						dst_y = real2Aspect(dst_y);

					assert(scalerProc != NULL);
					scalerProc((byte *)srcSurf->pixels + (r->x * 2 + 2) + (r->y + 1) * srcPitch, srcPitch,
							   (byte *)_hwscreen->pixels + rx1 * 2 + dst_y * dstPitch, dstPitch, r->w, dst_h);
				}

				r->x = rx1;
				r->y = dst_y;
				r->w = r->w * scale1;
				r->h = dst_h * scale1;

#ifndef DISABLE_SCALERS
				if (_adjustAspectRatio && orig_dst_y < height && !_overlayVisible)
					r->h = stretch200To240((uint8 *) _hwscreen->pixels, dstPitch, r->w, r->h, r->x, r->y, orig_dst_y * scale1);
#endif
			}
			SDL_UnlockSurface(srcSurf);
			SDL_UnlockSurface(_hwscreen);
		}

		// Readjust the dirty rect list in case we are doing a full update.
		// This is necessary if shaking is active.
		if (_forceFull) {
			_dirtyRectList[0].y = 0;
			_dirtyRectList[0].h = effectiveScreenHeight();
		}

		drawMouse();

		if (_osdAlpha != SDL_ALPHA_TRANSPARENT) {
			SDL_BlitSurface(_osdSurface, 0, _hwscreen, 0);
		}

		// Finally, blit all our changes to the screen
		SDL_UpdateRects(_hwscreen, _numDirtyRects, _dirtyRectList);
	} else {
		drawMouse();
		if (_numDirtyRects)
			SDL_UpdateRects(_hwscreen, _numDirtyRects, _dirtyRectList);
	}

	_numDirtyRects = 0;
	_forceFull = false;
}

bool OSystem_GP2X::saveScreenshot(const char *filename) {
	assert(_hwscreen != NULL);

	Common::StackLock lock(_graphicsMutex);	// Lock the mutex until this function ends
	return SDL_SaveBMP(_hwscreen, filename) == 0;
}

void OSystem_GP2X::setFullscreenMode(bool enable) {
	Common::StackLock lock(_graphicsMutex);

	if (_fullscreen != enable || _transactionMode == kTransactionCommit) {
		assert(_hwscreen != 0);
		_fullscreen = enable;

		if (_transactionMode == kTransactionActive) {
			_transactionDetails.fs = enable;
			_transactionDetails.fsChanged = true;

			_transactionDetails.needHotswap = true;

			return;
		}

#if (defined(MACOSX) && !SDL_VERSION_ATLEAST(1, 2, 6)) || defined(__MAEMO__)
		// On OS X, SDL_WM_ToggleFullScreen is currently not implemented. Worse,
		// before SDL 1.2.6 it always returned -1 (which would indicate a
		// successful switch). So we simply don't call it at all and use
		// hotswapGFXMode() directly to switch to fullscreen mode.
		hotswapGFXMode();
#else
		if (!SDL_WM_ToggleFullScreen(_hwscreen)) {
			// if ToggleFullScreen fails, achieve the same effect with hotswap gfx mode
			hotswapGFXMode();
		} else {
			// Blit everything to the screen
			internUpdateScreen();

			// Make sure that an Common::EVENT_SCREEN_CHANGED gets sent later
			_modeChanged = true;
		}
#endif
	}
}

void OSystem_GP2X::setAspectRatioCorrection(bool enable) {
	if ((_screenHeight == 200 && _adjustAspectRatio != enable) ||
		_transactionMode == kTransactionCommit) {
		Common::StackLock lock(_graphicsMutex);

		//assert(_hwscreen != 0);
		_adjustAspectRatio = enable;

		if (_transactionMode == kTransactionActive) {
			_transactionDetails.ar = enable;
			_transactionDetails.arChanged = true;

			_transactionDetails.needHotswap = true;

			return;
		} else {
			if (_transactionMode != kTransactionCommit)
				hotswapGFXMode();
		}

		// Make sure that an Common::EVENT_SCREEN_CHANGED gets sent later
		_modeChanged = true;
	}
}

void OSystem_GP2X::setZoomOnMouse() {
		if (_adjustZoomOnMouse == true) {
			_adjustZoomOnMouse = false;
			return;
		} else {
			_adjustZoomOnMouse = true;
			return;
		}
}

void OSystem_GP2X::copyRectToScreen(const byte *src, int pitch, int x, int y, int w, int h) {
	assert (_transactionMode == kTransactionNone);
	assert(src);

	if (_screen == NULL) {
		warning("OSystem_GP2X::copyRectToScreen: _screen == NULL");
		return;
	}

	Common::StackLock lock(_graphicsMutex);	// Lock the mutex until this function ends

//	assert(x >= 0 && x < _screenWidth);
//	assert(y >= 0 && y < _screenHeight);
//	assert(h > 0 && y + h <= _screenHeight);
//	assert(w > 0 && x + w <= _screenWidth);

	if (((long)src & 3) == 0 && pitch == _screenWidth && x == 0 && y == 0 &&
			w == _screenWidth && h == _screenHeight && _modeFlags & DF_WANT_RECT_OPTIM) {
		/* Special, optimized case for full screen updates.
		 * It tries to determine what areas were actually changed,
		 * and just updates those, on the actual display. */
		addDirtyRgnAuto(src);
	} else {
		/* Clip the coordinates */
		if (x < 0) {
			w += x;
			src -= x;
			x = 0;
		}

		if (y < 0) {
			h += y;
			src -= y * pitch;
			y = 0;
		}

		if (w > _screenWidth - x) {
			w = _screenWidth - x;
		}

		if (h > _screenHeight - y) {
			h = _screenHeight - y;
		}

		if (w <= 0 || h <= 0)
			return;

		_cksumValid = false;
		addDirtyRect(x, y, w, h);
	}

	// Try to lock the screen surface
	if (SDL_LockSurface(_screen) == -1)
		error("SDL_LockSurface failed: %s", SDL_GetError());

	byte *dst = (byte *)_screen->pixels + y * _screenWidth + x;

	if (_screenWidth == pitch && pitch == w) {
		memcpy(dst, src, h*w);
	} else {
		do {
			memcpy(dst, src, w);
			src += pitch;
			dst += _screenWidth;
		} while (--h);
	}

	// Unlock the screen surface
	SDL_UnlockSurface(_screen);
}

Graphics::Surface *OSystem_GP2X::lockScreen() {
	assert (_transactionMode == kTransactionNone);

	// Lock the graphics mutex
	lockMutex(_graphicsMutex);

	// paranoia check
	assert(!_screenIsLocked);
	_screenIsLocked = true;

	// Try to lock the screen surface
	if (SDL_LockSurface(_screen) == -1)
		error("SDL_LockSurface failed: %s", SDL_GetError());

	_framebuffer.pixels = _screen->pixels;
	_framebuffer.w = _screen->w;
	_framebuffer.h = _screen->h;
	_framebuffer.pitch = _screen->pitch;
	_framebuffer.bytesPerPixel = 1;

	return &_framebuffer;
}

void OSystem_GP2X::unlockScreen() {
	assert (_transactionMode == kTransactionNone);

	// paranoia check
	assert(_screenIsLocked);
	_screenIsLocked = false;

	// Unlock the screen surface
	SDL_UnlockSurface(_screen);

	// Trigger a full screen update
	_forceFull = true;

	// Finally unlock the graphics mutex
	unlockMutex(_graphicsMutex);
}

void OSystem_GP2X::addDirtyRect(int x, int y, int w, int h, bool realCoordinates) {
	if (_forceFull)
		return;

	if (_numDirtyRects == NUM_DIRTY_RECT) {
		_forceFull = true;
		return;
	}

	int height, width;

	if (!_overlayVisible && !realCoordinates) {
		width = _screenWidth;
		height = _screenHeight;
	} else {
		width = _overlayWidth;
		height = _overlayHeight;
	}

	// Extend the dirty region by 1 pixel for scalers
	// that "smear" the screen, e.g. 2xSAI
	if ((_modeFlags & DF_UPDATE_EXPAND_1_PIXEL) && !realCoordinates) {
		x--;
		y--;
		w+=2;
		h+=2;
	}

	// clip
	if (x < 0) {
		w += x;
		x = 0;
	}

	if (y < 0) {
		h += y;
		y=0;
	}

	if (w > width - x) {
		w = width - x;
	}

	if (h > height - y) {
		h = height - y;
	}

	if (_adjustAspectRatio && !_overlayVisible && !realCoordinates) {
		makeRectStretchable(x, y, w, h);
	}

	if (w == width && h == height) {
		_forceFull = true;
		return;
	}

	if (w > 0 && h > 0) {
		SDL_Rect *r = &_dirtyRectList[_numDirtyRects++];

		r->x = x;
		r->y = y;
		r->w = w;
		r->h = h;
	}
}

void OSystem_GP2X::makeChecksums(const byte *buf) {
	assert(buf);
	uint32 *sums = _dirtyChecksums;
	uint x,y;
	const uint last_x = (uint)_screenWidth / 8;
	const uint last_y = (uint)_screenHeight / 8;

	const uint BASE = 65521; /* largest prime smaller than 65536 */

	/* the 8x8 blocks in buf are enumerated starting in the top left corner and
	 * reading each line at a time from left to right */
	for (y = 0; y != last_y; y++, buf += _screenWidth * (8 - 1))
		for (x = 0; x != last_x; x++, buf += 8) {
			// Adler32 checksum algorithm (from RFC1950, used by gzip and zlib).
			// This computes the Adler32 checksum of a 8x8 pixel block. Note
			// that we can do the modulo operation (which is the slowest part)
			// of the algorithm) at the end, instead of doing each iteration,
			// since we only have 64 iterations in total - and thus s1 and
			// s2 can't overflow anyway.
			uint32 s1 = 1;
			uint32 s2 = 0;
			const byte *ptr = buf;
			for (int subY = 0; subY < 8; subY++) {
				for (int subX = 0; subX < 8; subX++) {
					s1 += ptr[subX];
					s2 += s1;
				}
				ptr += _screenWidth;
			}

			s1 %= BASE;
			s2 %= BASE;

			/* output the checksum for this block */
			*sums++ =  (s2 << 16) + s1;
	}
}

void OSystem_GP2X::addDirtyRgnAuto(const byte *buf) {
	assert(buf);
	assert(((long)buf & 3) == 0);

	/* generate a table of the checksums */
	makeChecksums(buf);

	if (!_cksumValid) {
		_forceFull = true;
		_cksumValid = true;
	}

	/* go through the checksum list, compare it with the previous checksums,
		 and add all dirty rectangles to a list. try to combine small rectangles
		 into bigger ones in a simple way */
	if (!_forceFull) {
		int x, y, w;
		uint32 *ck = _dirtyChecksums;

		for (y = 0; y != _screenHeight / 8; y++) {
			for (x = 0; x != _screenWidth / 8; x++, ck++) {
				if (ck[0] != ck[_cksumNum]) {
					/* found a dirty 8x8 block, now go as far to the right as possible,
						 and at the same time, unmark the dirty status by setting old to new. */
					w=0;
					do {
						ck[w + _cksumNum] = ck[w];
						w++;
					} while (x + w != _screenWidth / 8 && ck[w] != ck[w + _cksumNum]);

					addDirtyRect(x * 8, y * 8, w * 8, 8);

					if (_forceFull)
						goto get_out;
				}
			}
		}
	} else {
		get_out:;
		/* Copy old checksums to new */
		memcpy(_dirtyChecksums + _cksumNum, _dirtyChecksums, _cksumNum * sizeof(uint32));
	}
}

int16 OSystem_GP2X::getHeight() {
	return _screenHeight;
}

int16 OSystem_GP2X::getWidth() {
	return _screenWidth;
}

void OSystem_GP2X::setPalette(const byte *colors, uint start, uint num) {
	assert(colors);

	// Setting the palette before _screen is created is allowed - for now -
	// since we don't actually set the palette until the screen is updated.
	// But it could indicate a programming error, so let's warn about it.

	if (!_screen)
		warning("OSystem_SDL::setPalette: _screen == NULL");

	const byte *b = colors;
	uint i;
	SDL_Color *base = _currentPalette + start;
	for (i = 0; i < num; i++) {
		base[i].r = b[0];
		base[i].g = b[1];
		base[i].b = b[2];
		b += 4;
	}

	if (start < _paletteDirtyStart)
		_paletteDirtyStart = start;

	if (start + num > _paletteDirtyEnd)
		_paletteDirtyEnd = start + num;

	// Some games blink cursors with palette
	if (_cursorPaletteDisabled)
		blitCursor();
}

void OSystem_GP2X::grabPalette(byte *colors, uint start, uint num) {
	assert(colors);
	const SDL_Color *base = _currentPalette + start;

	for (uint i = 0; i < num; ++i) {
		colors[i * 4] = base[i].r;
		colors[i * 4 + 1] = base[i].g;
		colors[i * 4 + 2] = base[i].b;
		colors[i * 4 + 3] = 0xFF;
	}
}

void OSystem_GP2X::setCursorPalette(const byte *colors, uint start, uint num) {
	assert(colors);
	const byte *b = colors;
	uint i;
	SDL_Color *base = _cursorPalette + start;
	for (i = 0; i < num; i++) {
		base[i].r = b[0];
		base[i].g = b[1];
		base[i].b = b[2];
		b += 4;
	}

	_cursorPaletteDisabled = false;

	blitCursor();
}

void OSystem_GP2X::setShakePos(int shake_pos) {
	assert (_transactionMode == kTransactionNone);

	_newShakePos = shake_pos;
}

#pragma mark -
#pragma mark --- Overlays ---
#pragma mark -

void OSystem_GP2X::showOverlay() {
	assert (_transactionMode == kTransactionNone);

	int x, y;

	if (_overlayVisible)
		return;

	_overlayVisible = true;

	// Since resolution could change, put mouse to adjusted position
	// Fixes bug #1349059
	x = _mouseCurState.x * _scaleFactor;
	if (_adjustAspectRatio)
		y = real2Aspect(_mouseCurState.y) * _scaleFactor;
	else
		y = _mouseCurState.y * _scaleFactor;

	warpMouse(x, y);

	clearOverlay();
}

void OSystem_GP2X::hideOverlay() {
	assert (_transactionMode == kTransactionNone);

	if (!_overlayVisible)
		return;

	int x, y;

	_overlayVisible = false;

	// Since resolution could change, put mouse to adjusted position
	// Fixes bug #1349059
	x = _mouseCurState.x / _scaleFactor;
	y = _mouseCurState.y / _scaleFactor;
	if (_adjustAspectRatio)
		y = aspect2Real(y);

	warpMouse(x, y);

	clearOverlay();

	_forceFull = true;
}

void OSystem_GP2X::clearOverlay() {
	//assert (_transactionMode == kTransactionNone);

	Common::StackLock lock(_graphicsMutex);	// Lock the mutex until this function ends

	if (!_overlayVisible)
		return;

	// Clear the overlay by making the game screen "look through" everywhere.
	SDL_Rect src, dst;
	src.x = src.y = 0;
	dst.x = dst.y = 1;
	src.w = dst.w = _screenWidth;
	src.h = dst.h = _screenHeight;
	if (SDL_BlitSurface(_screen, &src, _tmpscreen, &dst) != 0)
		error("SDL_BlitSurface failed: %s", SDL_GetError());

	SDL_LockSurface(_tmpscreen);
	SDL_LockSurface(_overlayscreen);
	_scalerProc((byte *)(_tmpscreen->pixels) + _tmpscreen->pitch + 2, _tmpscreen->pitch,
	(byte *)_overlayscreen->pixels, _overlayscreen->pitch, _screenWidth, _screenHeight);

#ifndef DISABLE_SCALERS
	if (_adjustAspectRatio)
		stretch200To240((uint8 *)_overlayscreen->pixels, _overlayscreen->pitch,
						_overlayWidth, _screenHeight * _scaleFactor, 0, 0, 0);
#endif
	SDL_UnlockSurface(_tmpscreen);
	SDL_UnlockSurface(_overlayscreen);

	_forceFull = true;
}

void OSystem_GP2X::grabOverlay(OverlayColor *buf, int pitch) {
	assert (_transactionMode == kTransactionNone);

	if (_overlayscreen == NULL)
		return;

	if (SDL_LockSurface(_overlayscreen) == -1)
		error("SDL_LockSurface failed: %s", SDL_GetError());

	byte *src = (byte *)_overlayscreen->pixels;
	int h = _overlayHeight;
	do {
		memcpy(buf, src, _overlayWidth * 2);
		src += _overlayscreen->pitch;
		buf += pitch;
	} while (--h);

	SDL_UnlockSurface(_overlayscreen);
}

void OSystem_GP2X::copyRectToOverlay(const OverlayColor *buf, int pitch, int x, int y, int w, int h) {
	assert (_transactionMode == kTransactionNone);

	if (_overlayscreen == NULL)
		return;

	// Clip the coordinates
	if (x < 0) {
		w += x;
		buf -= x;
		x = 0;
	}

	if (y < 0) {
		h += y; buf -= y * pitch;
		y = 0;
	}

	if (w > _overlayWidth - x) {
		w = _overlayWidth - x;
	}

	if (h > _overlayHeight - y) {
		h = _overlayHeight - y;
	}

	if (w <= 0 || h <= 0)
		return;

	// Mark the modified region as dirty
	_cksumValid = false;
	addDirtyRect(x, y, w, h);

	if (SDL_LockSurface(_overlayscreen) == -1)
		error("SDL_LockSurface failed: %s", SDL_GetError());

	byte *dst = (byte *)_overlayscreen->pixels + y * _overlayscreen->pitch + x * 2;
	do {
		memcpy(dst, buf, w * 2);
		dst += _overlayscreen->pitch;
		buf += pitch;
	} while (--h);

	SDL_UnlockSurface(_overlayscreen);
}

OverlayColor OSystem_GP2X::RGBToColor(uint8 r, uint8 g, uint8 b) {
	return SDL_MapRGB(_overlayscreen->format, r, g, b);
}

void OSystem_GP2X::colorToRGB(OverlayColor color, uint8 &r, uint8 &g, uint8 &b) {
	SDL_GetRGB(color, _overlayscreen->format, &r, &g, &b);
}


#pragma mark -
#pragma mark --- Mouse ---
#pragma mark -

bool OSystem_GP2X::showMouse(bool visible) {
	if (_mouseVisible == visible)
		return visible;

	bool last = _mouseVisible;
	_mouseVisible = visible;

	return last;
}

void OSystem_GP2X::setMousePos(int x, int y) {
	if (x != _mouseCurState.x || y != _mouseCurState.y) {
		_mouseCurState.x = x;
		_mouseCurState.y = y;
	}
}

void OSystem_GP2X::warpMouse(int x, int y) {
	int y1 = y;

	if (_adjustAspectRatio && !_overlayVisible)
		y1 = real2Aspect(y);

	if (_mouseCurState.x != x || _mouseCurState.y != y) {
		if (!_overlayVisible)
			SDL_WarpMouse(x * _scaleFactor, y1 * _scaleFactor);
		else
			SDL_WarpMouse(x, y1);

		// SDL_WarpMouse() generates a mouse movement event, so
		// setMousePos() would be called eventually. However, the
		// cannon script in CoMI calls this function twice each time
		// the cannon is reloaded. Unless we update the mouse position
		// immediately the second call is ignored, causing the cannon
		// to change its aim.

		setMousePos(x, y);
	}
}

void OSystem_GP2X::setMouseCursor(const byte *buf, uint w, uint h, int hotspot_x, int hotspot_y, byte keycolor, int cursorTargetScale) {
	if (w == 0 || h == 0)
		return;

	_mouseCurState.hotX = hotspot_x;
	_mouseCurState.hotY = hotspot_y;

	_mouseKeyColor = keycolor;

 	_cursorTargetScale = cursorTargetScale;

 	if (_mouseCurState.w != (int)w || _mouseCurState.h != (int)h) {
 		_mouseCurState.w = w;
 		_mouseCurState.h = h;

 		if (_mouseOrigSurface)
 			SDL_FreeSurface(_mouseOrigSurface);

		// Allocate bigger surface because AdvMame2x adds black pixel at [0,0]
 		_mouseOrigSurface = SDL_CreateRGBSurface(SDL_SWSURFACE | SDL_RLEACCEL | SDL_SRCCOLORKEY | SDL_SRCALPHA,
 						_mouseCurState.w + 2,
 						_mouseCurState.h + 2,
 						16,
 						_hwscreen->format->Rmask,
 						_hwscreen->format->Gmask,
 						_hwscreen->format->Bmask,
 						_hwscreen->format->Amask);

 		if (_mouseOrigSurface == NULL)
 			error("allocating _mouseOrigSurface failed");
 		SDL_SetColorKey(_mouseOrigSurface, SDL_RLEACCEL | SDL_SRCCOLORKEY | SDL_SRCALPHA, kMouseColorKey);
 	}

	free(_mouseData);

	_mouseData = (byte *)malloc(w * h);
	memcpy(_mouseData, buf, w * h);
	blitCursor();
}

void OSystem_GP2X::blitCursor() {
	byte *dstPtr;
	const byte *srcPtr = _mouseData;
	byte color;
	int w, h, i, j;

	if (!_mouseOrigSurface || !_mouseData)
 		return;

	w = _mouseCurState.w;
	h = _mouseCurState.h;

	SDL_LockSurface(_mouseOrigSurface);

	// Make whole surface transparent
	for (i = 0; i < h + 2; i++) {
		dstPtr = (byte *)_mouseOrigSurface->pixels + _mouseOrigSurface->pitch * i;
		for (j = 0; j < w + 2; j++) {
			*(uint16 *)dstPtr = kMouseColorKey;
			dstPtr += 2;
		}
	}

	// Draw from [1,1] since AdvMame2x adds artefact at 0,0
	dstPtr = (byte *)_mouseOrigSurface->pixels + _mouseOrigSurface->pitch + 2;

	SDL_Color *palette;

	if (_cursorPaletteDisabled)
		palette = _currentPalette;
	else
		palette = _cursorPalette;

	for (i = 0; i < h; i++) {
		for (j = 0; j < w; j++) {
			color = *srcPtr;
			if (color != _mouseKeyColor) {	// transparent, don't draw
				*(uint16 *)dstPtr = SDL_MapRGB(_mouseOrigSurface->format,
					palette[color].r, palette[color].g, palette[color].b);
			}
			dstPtr += 2;
			srcPtr++;
		}
		dstPtr += _mouseOrigSurface->pitch - w * 2;
  	}

	int rW, rH;

	if (_cursorTargetScale >= _scaleFactor) {
		// The cursor target scale is greater or equal to the scale at
		// which the rest of the screen is drawn. We do not downscale
		// the cursor image, we draw it at its original size. It will
		// appear too large on screen.

		rW = w;
		rH = h;
		_mouseCurState.rHotX = _mouseCurState.hotX;
		_mouseCurState.rHotY = _mouseCurState.hotY;

		// The virtual dimensions may be larger than the original.

		_mouseCurState.vW = w * _cursorTargetScale / _scaleFactor;
		_mouseCurState.vH = h * _cursorTargetScale / _scaleFactor;
		_mouseCurState.vHotX = _mouseCurState.hotX * _cursorTargetScale /
			_scaleFactor;
		_mouseCurState.vHotY = _mouseCurState.hotY * _cursorTargetScale /
			_scaleFactor;
	} else {
		// The cursor target scale is smaller than the scale at which
		// the rest of the screen is drawn. We scale up the cursor
		// image to make it appear correct.

		rW = w * _scaleFactor / _cursorTargetScale;
		rH = h * _scaleFactor / _cursorTargetScale;
		_mouseCurState.rHotX = _mouseCurState.hotX * _scaleFactor /
			_cursorTargetScale;
		_mouseCurState.rHotY = _mouseCurState.hotY * _scaleFactor /
			_cursorTargetScale;

		// The virtual dimensions will be the same as the original.

		_mouseCurState.vW = w;
		_mouseCurState.vH = h;
		_mouseCurState.vHotX = _mouseCurState.hotX;
		_mouseCurState.vHotY = _mouseCurState.hotY;
  	}

	int rH1 = rH; // store original to pass to aspect-correction function later
	if (_adjustAspectRatio && _cursorTargetScale == 1) {
		rH = real2Aspect(rH - 1) + 1;
		_mouseCurState.rHotY = real2Aspect(_mouseCurState.rHotY);
	}

	if (_mouseCurState.rW != rW || _mouseCurState.rH != rH) {
		_mouseCurState.rW = rW;
		_mouseCurState.rH = rH;

		if (_mouseSurface)
			SDL_FreeSurface(_mouseSurface);

		_mouseSurface = SDL_CreateRGBSurface(SDL_SWSURFACE | SDL_RLEACCEL | SDL_SRCCOLORKEY | SDL_SRCALPHA,
						_mouseCurState.rW,
						_mouseCurState.rH,
						16,
						_hwscreen->format->Rmask,
						_hwscreen->format->Gmask,
						_hwscreen->format->Bmask,
						_hwscreen->format->Amask);

		if (_mouseSurface == NULL)
			error("allocating _mouseSurface failed");

		SDL_SetColorKey(_mouseSurface, SDL_RLEACCEL | SDL_SRCCOLORKEY | SDL_SRCALPHA, kMouseColorKey);
  	}

	SDL_LockSurface(_mouseSurface);

	ScalerProc *scalerProc;

	// If possible, use the same scaler for the cursor as for the rest of
	// the game. This only works well with the non-blurring scalers so we
	// actually only use the 1x, 1.5x, 2x and AdvMame scalers.

	if (_cursorTargetScale == 1 && (_mode == GFX_DOUBLESIZE || _mode == GFX_TRIPLESIZE))
		scalerProc = _scalerProc;
	else
		scalerProc = scalersMagn[_cursorTargetScale - 1][_scaleFactor - 1];

	scalerProc((byte *)_mouseOrigSurface->pixels + _mouseOrigSurface->pitch + 2,
		_mouseOrigSurface->pitch, (byte *)_mouseSurface->pixels, _mouseSurface->pitch,
		_mouseCurState.w, _mouseCurState.h);

	if (_adjustAspectRatio && _cursorTargetScale == 1)
		cursorStretch200To240((uint8 *)_mouseSurface->pixels, _mouseSurface->pitch, rW, rH1, 0, 0, 0);

	SDL_UnlockSurface(_mouseSurface);
	SDL_UnlockSurface(_mouseOrigSurface);
}

// Basically it is kVeryFastAndUglyAspectMode of stretch200To240 from
// common/scale/aspect.cpp
static int cursorStretch200To240(uint8 *buf, uint32 pitch, int width, int height, int srcX, int srcY, int origSrcY) {
	int maxDstY = real2Aspect(origSrcY + height - 1);
	int y;
	const uint8 *startSrcPtr = buf + srcX * 2 + (srcY - origSrcY) * pitch;
	uint8 *dstPtr = buf + srcX * 2 + maxDstY * pitch;

	for (y = maxDstY; y >= srcY; y--) {
		const uint8 *srcPtr = startSrcPtr + aspect2Real(y) * pitch;

		if (srcPtr == dstPtr)
			break;
		memcpy(dstPtr, srcPtr, width * 2);
		dstPtr -= pitch;
	}

	return 1 + maxDstY - srcY;
}

void OSystem_GP2X::undrawMouse() {
	const int x = _mouseBackup.x;
	const int y = _mouseBackup.y;

	// When we switch bigger overlay off mouse jumps. Argh!
	// This is intended to prevent undrawing offscreen mouse
	if (!_overlayVisible && (x >= _screenWidth || y >= _screenHeight)) {
		return;
	}

	if (_mouseBackup.w != 0 && _mouseBackup.h != 0)
		addDirtyRect(x, y, _mouseBackup.w, _mouseBackup.h);
}

void OSystem_GP2X::drawMouse() {
	if (!_mouseVisible || !_mouseSurface) {
		_mouseBackup.x = _mouseBackup.y = _mouseBackup.w = _mouseBackup.h = 0;
  		return;
	}

	SDL_Rect zoomdst;
	SDL_Rect dst;
	int scale;
	int width, height;
	int hotX, hotY;
	int tmpScreenWidth, tmpScreenHeight;

	// Temp vars to ensure we zoom to the LCD resolution or greater.
	tmpScreenWidth = _screenWidth;
	tmpScreenHeight = _screenHeight;

	if (_screenHeight <= 240) {
		tmpScreenHeight = 240;
	}

	if (_screenWidth <= 320) {
		tmpScreenWidth = 320;
	}

	dst.x = _mouseCurState.x;
	dst.y = _mouseCurState.y;

	if (!_overlayVisible) {
		scale = _scaleFactor;
		width = _screenWidth;
		height = _screenHeight;
		dst.w = _mouseCurState.vW;
		dst.h = _mouseCurState.vH;
		hotX = _mouseCurState.vHotX;
		hotY = _mouseCurState.vHotY;
	} else {
		scale = 1;
		width = _overlayWidth;
		height = _overlayHeight;
		dst.w = _mouseCurState.rW;
		dst.h = _mouseCurState.rH;
		hotX = _mouseCurState.rHotX;
		hotY = _mouseCurState.rHotY;
	}

	// The mouse is undrawn using virtual coordinates, i.e. they may be
	// scaled and aspect-ratio corrected.

	_mouseBackup.x = dst.x - hotX;
	_mouseBackup.y = dst.y - hotY;
	_mouseBackup.w = dst.w;
	_mouseBackup.h = dst.h;

	// We draw the pre-scaled cursor image, so now we need to adjust for
	// scaling, shake position and aspect ratio correction manually.

	if (!_overlayVisible) {
		dst.y += _currentShakePos;
	}

	if (_adjustAspectRatio && !_overlayVisible)
		dst.y = real2Aspect(dst.y);

	dst.x = scale * dst.x - _mouseCurState.rHotX;
	dst.y = scale * dst.y - _mouseCurState.rHotY;
	dst.w = _mouseCurState.rW;
	dst.h = _mouseCurState.rH;

	// Hacking about with the zoom around mouse pointer stuff.

	if (_adjustZoomOnMouse == true){

		zoomdst.w = (tmpScreenWidth / 2);
		zoomdst.h = (tmpScreenHeight / 2);

		// Create a zoomed rect centered on the mouse pointer.
		// Will pan 1/4 of the screen.

		if (dst.x > ((tmpScreenWidth / 4) * 3)) {
			zoomdst.x = (tmpScreenWidth / 2);
		} else {
			zoomdst.x = (dst.x - (tmpScreenWidth / 4));
			if (zoomdst.x < 0) {
				zoomdst.x = 0;
			}
		}

		if (dst.y > ((tmpScreenHeight / 4) * 3)) {
			zoomdst.y = (tmpScreenHeight / 2);
		} else {
			zoomdst.y = (dst.y - (tmpScreenHeight / 4));
			if (zoomdst.y < 0) {
				zoomdst.y = 0;
			}
		}
		SDL_GP2X_Display(&zoomdst);
	} else {

		// Make sure we are looking at the whole screen otherwise.

		zoomdst.x = 0;
		zoomdst.y = 0;
		zoomdst.w = (tmpScreenWidth);
		zoomdst.h = (tmpScreenHeight);

		SDL_GP2X_Display(&zoomdst);
	};


	// Note that SDL_BlitSurface() and addDirtyRect() will both perform any
	// clipping necessary

	if (SDL_BlitSurface(_mouseSurface, NULL, _hwscreen, &dst) != 0)
		error("SDL_BlitSurface failed: %s", SDL_GetError());

	// The screen will be updated using real surface coordinates, i.e.
	// they will not be scaled or aspect-ratio corrected.

	addDirtyRect(dst.x, dst.y, dst.w, dst.h, true);
}

#pragma mark -
#pragma mark --- On Screen Display ---
#pragma mark -

void OSystem_GP2X::displayMessageOnOSD(const char *msg) {
	assert (_transactionMode == kTransactionNone);
	assert(msg);

	Common::StackLock lock(_graphicsMutex);	// Lock the mutex until this function ends

	uint i;

	// Lock the OSD surface for drawing
	if (SDL_LockSurface(_osdSurface))
		error("displayMessageOnOSD: SDL_LockSurface failed: %s", SDL_GetError());

	Graphics::Surface dst;
	dst.pixels = _osdSurface->pixels;
	dst.w = _osdSurface->w;
	dst.h = _osdSurface->h;
	dst.pitch = _osdSurface->pitch;
	dst.bytesPerPixel = _osdSurface->format->BytesPerPixel;

	// The font we are going to use:
	const Graphics::Font *font = FontMan.getFontByUsage(Graphics::FontManager::kOSDFont);

	// Clear everything with the "transparent" color, i.e. the colorkey
	SDL_FillRect(_osdSurface, 0, kOSDColorKey);

	// Split the message into separate lines.
	Common::StringList lines;
	const char *ptr;
	for (ptr = msg; *ptr; ++ptr) {
		if (*ptr == '\n') {
			lines.push_back(Common::String(msg, ptr - msg));
			msg = ptr + 1;
		}
	}
	lines.push_back(Common::String(msg, ptr - msg));

	// Determine a rect which would contain the message string (clipped to the
	// screen dimensions).
	const int vOffset = 6;
	const int lineSpacing = 1;
	const int lineHeight = font->getFontHeight() + 2 * lineSpacing;
	int width = 0;
	int height = lineHeight * lines.size() + 2 * vOffset;
	for (i = 0; i < lines.size(); i++) {
		width = MAX(width, font->getStringWidth(lines[i]) + 14);
	}

	// Clip the rect
	if (width > dst.w)
		width = dst.w;
	if (height > dst.h)
		height = dst.h;

	// Draw a dark gray rect
	// TODO: Rounded corners ? Border?
	SDL_Rect osdRect;
	osdRect.x = (dst.w - width) / 2;
	osdRect.y = (dst.h - height) / 2;
	osdRect.w = width;
	osdRect.h = height;
	SDL_FillRect(_osdSurface, &osdRect, SDL_MapRGB(_osdSurface->format, 64, 64, 64));

	// Render the message, centered, and in white
	for (i = 0; i < lines.size(); i++) {
		font->drawString(&dst, lines[i],
							osdRect.x, osdRect.y + i * lineHeight + vOffset + lineSpacing, osdRect.w,
							SDL_MapRGB(_osdSurface->format, 255, 255, 255),
							Graphics::kTextAlignCenter);
	}

	// Finished drawing, so unlock the OSD surface again
	SDL_UnlockSurface(_osdSurface);

	// Init the OSD display parameters, and the fade out
	_osdAlpha = SDL_ALPHA_TRANSPARENT +  kOSDInitialAlpha * (SDL_ALPHA_OPAQUE - SDL_ALPHA_TRANSPARENT) / 100;
	_osdFadeStartTime = SDL_GetTicks() + kOSDFadeOutDelay;
	SDL_SetAlpha(_osdSurface, SDL_RLEACCEL | SDL_SRCCOLORKEY | SDL_SRCALPHA, _osdAlpha);

	// Ensure a full redraw takes place next time the screen is updated
	_forceFull = true;
}

#pragma mark -
#pragma mark --- Misc ---
#pragma mark -

void OSystem_GP2X::handleScalerHotkeys(const SDL_KeyboardEvent &key) {
	// Ctrl-Alt-a toggles aspect ratio correction
	if (key.keysym.sym == 'a') {
		setFeatureState(kFeatureAspectRatioCorrection, !_adjustAspectRatio);

		char buffer[128];
		if (_adjustAspectRatio)
			sprintf(buffer, "Enabled aspect ratio correction\n%d x %d -> %d x %d",
				_screenWidth, _screenHeight,
				_hwscreen->w, _hwscreen->h
				);
		else
			sprintf(buffer, "Disabled aspect ratio correction\n%d x %d -> %d x %d",
				_screenWidth, _screenHeight,
				_hwscreen->w, _hwscreen->h
				);
		displayMessageOnOSD(buffer);


		return;
	}

	int newMode = -1;
	int factor = _scaleFactor - 1;

	// Increase/decrease the scale factor
	if (key.keysym.sym == SDLK_EQUALS || key.keysym.sym == SDLK_PLUS || key.keysym.sym == SDLK_MINUS ||
		key.keysym.sym == SDLK_KP_PLUS || key.keysym.sym == SDLK_KP_MINUS) {
		factor += (key.keysym.sym == SDLK_MINUS || key.keysym.sym == SDLK_KP_MINUS) ? -1 : +1;
		if (0 <= factor && factor <= 3) {
			newMode = s_gfxModeSwitchTable[_scalerType][factor];
		}
	}

	const bool isNormalNumber = (SDLK_1 <= key.keysym.sym && key.keysym.sym <= SDLK_9);
	const bool isKeypadNumber = (SDLK_KP1 <= key.keysym.sym && key.keysym.sym <= SDLK_KP9);
	if (isNormalNumber || isKeypadNumber) {
		_scalerType = key.keysym.sym - (isNormalNumber ? SDLK_1 : SDLK_KP1);
		if (_scalerType >= ARRAYSIZE(s_gfxModeSwitchTable))
			return;

		while (s_gfxModeSwitchTable[_scalerType][factor] < 0) {
			assert(factor > 0);
			factor--;
		}
		newMode = s_gfxModeSwitchTable[_scalerType][factor];
	}

	if (newMode >= 0) {
		setGraphicsMode(newMode);

		if (_osdSurface) {
			const char *newScalerName = 0;
			const GraphicsMode *g = getSupportedGraphicsModes();
			while (g->name) {
				if (g->id == _mode) {
					newScalerName = g->description;
					break;
				}
				g++;
			}
			if (newScalerName) {
				char buffer[128];
				sprintf(buffer, "Active graphics filter: %s\n%d x %d -> %d x %d",
					newScalerName,
					_screenWidth, _screenHeight,
					_hwscreen->w, _hwscreen->h
					);
				displayMessageOnOSD(buffer);
			}
		}
	}
}