use Cwd;

$buildDir = getcwd();
chdir("../../../");

# list of project files to process
@mmp_files = (

	# Engine Project files
	"mmp/scummvm_agi.mmp",
	"mmp/scummvm_agos.mmp",
	"mmp/scummvm_cge.mmp",
	"mmp/scummvm_cine.mmp",
	"mmp/scummvm_composer.mmp",
	"mmp/scummvm_cruise.mmp",
	"mmp/scummvm_draci.mmp",
	"mmp/scummvm_drascula.mmp",
	"mmp/scummvm_dreamweb.mmp",
	"mmp/scummvm_gob.mmp",
	"mmp/scummvm_groovie.mmp",
	"mmp/scummvm_hopkins.mmp",
	"mmp/scummvm_hugo.mmp",
	"mmp/scummvm_kyra.mmp",
	"mmp/scummvm_lure.mmp",
	"mmp/scummvm_m4.mmp",
	"mmp/scummvm_made.mmp",
	"mmp/scummvm_mohawk.mmp",
	"mmp/scummvm_mortevielle.mmp",
	"mmp/scummvm_neverhood.mmp",
	"mmp/scummvm_parallaction.mmp",
	"mmp/scummvm_pegasus.mmp",
	"mmp/scummvm_queen.mmp",
	"mmp/scummvm_saga.mmp",
	"mmp/scummvm_sci.mmp",
	"mmp/scummvm_scumm.mmp",
	"mmp/scummvm_sky.mmp",
	"mmp/scummvm_sword1.mmp",
	"mmp/scummvm_sword2.mmp",
	"mmp/scummvm_teenagent.mmp",
	"mmp/scummvm_tinsel.mmp",
	"mmp/scummvm_toltecs.mmp",
	"mmp/scummvm_tony.mmp",
	"mmp/scummvm_toon.mmp",
	"mmp/scummvm_touche.mmp",
	"mmp/scummvm_tsage.mmp",
	"mmp/scummvm_tucker.mmp",
	"mmp/scummvm_voyeur.mmp",
	"mmp/scummvm_wintermute.mmp",
	# New engines
	"mmp/scummvm_avalanche.mmp",
	"mmp/scummvm_bbvs.mmp",
	"mmp/scummvm_cge2.mmp",
	"mmp/scummvm_fullpipe.mmp",
	"mmp/scummvm_lastexpress.mmp",
	"mmp/scummvm_mads.mmp",
	"mmp/scummvm_sword25.mmp",
	"mmp/scummvm_testbed.mmp",
	"mmp/scummvm_zvision.mmp",
	# Target Platform Project Files
	"S60/ScummVM_S60.mmp",
	"S60v3/ScummVM_S60v3.mmp",
	"S60v3/ScummVM_A0000658_S60v3.mmp",
	"S80/ScummVM_S80.mmp",
	"S90/ScummVM_S90.mmp",
	"UIQ2/ScummVM_UIQ2.mmp",
	"UIQ3/ScummVM_UIQ3.mmp",
	"UIQ3/ScummVM_A0000658_UIQ3.mmp"

);

# do this first to set all *.mmp & *.inf files to *.*.in states
ResetProjectFiles();

print "
=======================================================================================
Updating slave MACRO settings in MMP files from master 'scummvm_base.mmp'
=======================================================================================

";

# do this first so we have @EnabledDefines and @DisabledDefines for correct inclusion of SOURCE files later
UpdateSlaveMacros();

print "
=======================================================================================
Preparing to update all the Symbian MMP project files with objects from module.mk files
=======================================================================================

";


# some modules.mk files have #ifndef ENABLE_XXXX blocks:
my @section_empty = (""); # section standard: no #ifdef's in module.mk files
my @sections_agos = ("", "ENABLE_AGOS2"); # special sections for engine AGOS
my @sections_groovie = ("", "ENABLE_GROOVIE2"); # special sections for engine GROOVIE
my @sections_kyra = ("", "ENABLE_LOL","ENABLE_EOB"); # special sections for engine KYRA
my @sections_mohawk = ("", "ENABLE_CSTIME", "ENABLE_MYST", "ENABLE_RIVEN");  # special sections for engine MOHAWK
my @sections_saga = ("", "ENABLE_IHNM", "ENABLE_SAGA2"); # special sections for engine SAGA
my @sections_sci = ("", "ENABLE_SCI32");  # special sections for engine SCI
my @sections_scumm = ("", "ENABLE_SCUMM_7_8", "ENABLE_HE"); # special sections for engine SCUMM

# files excluded from build, case insensitive, will be matched in filename string only
my @excludes_snd = (
	"mt32.*",
	"fluidsynth.cpp",
	"i386.cpp",
	"part.*",
	"tables.cpp",
	"freeverb.cpp",
	"synth.cpp",
	"aReverbmodel.cpp",
	"bReverbmodel.cpp",
	"DelayReverb.cpp",
	"LA32WaveGenerator.cpp",
	"LegacyWaveGenerator.cpp",
	"ROMInfo.cpp",
	"FreeVerb.cpp",
	"FreeVerbModel.cpp",
	"La32Ramp.cpp",
        "Poly.cpp",
	"TVA.cpp",
	"TVF.cpp",
	"TVP.cpp",
	"rate.*"			# not really needed, USE_ARM_SOUND_ASM currently not parsed correctly,
						# "rate[_arm|_arm_asm].(cpp|s)" will be added later based on WINS/ARM build!
						# These #defines for compile time are set in portdefs.h
);

my @excludes_graphics = (	
);

my @excludes_gui = (
);

# the USE_ARM_* defines not parsed correctly, exclude manually:
my @excludes_scumm = (
	".*ARM.*",		# the *ARM.s files are added in .mmp files based on WINS/ARM build!
	# USE_ARM_SMUSH_ASM		codec47ARM.s
	# USE_ARM_GFX_ASM		gfxARM.s
	# USE_ARM_COSTUME_ASM	proc3ARM.s			compiled, linked?, but *not* used :P (portdefs.h)
);


#ParseModule(mmpStr,		dirStr,		ifdefArray,				[exclusionsArray])
ParseModule("_base",	"base",		\@section_empty); # now in ./TRG/ScummVM_TRG.mmp, these never change anyways...
ParseModule("_base",	"common",	\@section_empty);
ParseModule("_base",	"gui",		\@section_empty,		\@excludes_gui);
ParseModule("_base",	"graphics",	\@section_empty,		\@excludes_graphics);
ParseModule("_base",	"image",	\@section_empty);
ParseModule("_base",	"audio",	\@section_empty,		\@excludes_snd);
ParseModule("_base",	"video",	\@section_empty);

chdir("engines/");
ParseModule("_scumm",	"scumm",	\@sections_scumm,		\@excludes_scumm );
ParseModule("_agi",		"agi",		\@section_empty);
ParseModule("_agos",	"agos",		\@sections_agos);
ParseModule("_cine",	"cine",		\@section_empty);
ParseModule("_composer","composer",	\@section_empty);
ParseModule("_cruise",	"cruise",	\@section_empty);
ParseModule("_cge",	    "cge",		\@section_empty);
ParseModule("_draci",	"draci",	\@section_empty);
ParseModule("_drascula","drascula",	\@section_empty);
ParseModule("_dreamweb"     ,"dreamweb",	\@section_empty);
ParseModule("_gob",		"gob",		\@section_empty);
ParseModule("_groovie",	"groovie",	\@sections_groovie);
ParseModule("_hopkins","hopkins",	\@section_empty);
ParseModule("_hugo"     ,"hugo",	\@section_empty);
ParseModule("_kyra",	"kyra",		\@sections_kyra);
ParseModule("_lure",	"lure",		\@section_empty);
ParseModule("_made",	"made",		\@section_empty);
ParseModule("_mohawk"   ,"mohawk",	\@sections_mohawk);
ParseModule("_mortevielle"  ,"mortevielle",	\@section_empty);
ParseModule("_neverhood"  ,"neverhood",	\@section_empty);
ParseModule("_parallaction","parallaction",\@section_empty);
ParseModule("_pegasus","pegasus",	\@section_empty);
ParseModule("_queen",	"queen",	\@section_empty);
ParseModule("_saga",	"saga",		\@sections_saga);
ParseModule("_sci",		"sci",		\@sections_sci);
ParseModule("_sky",		"sky",		\@section_empty);
ParseModule("_sword1",	"sword1",	\@section_empty);
ParseModule("_sword2",	"sword2",	\@section_empty);
ParseModule("_teenagent","teenagent",	\@section_empty);
ParseModule("_tinsel",	"tinsel",	\@section_empty);
ParseModule("_toltecs","toltecs",	\@section_empty);
ParseModule("_tony",	"tony",		\@section_empty);
ParseModule("_toon"     ,"toon",	\@section_empty);
ParseModule("_touche",	"touche",	\@section_empty);
ParseModule("_tsage",	"tsage",	\@section_empty);
ParseModule("_tucker",	"tucker",	\@section_empty);
ParseModule("_voyeur"     ,"voyeur",	\@section_empty);
ParseModule("_wintermute","wintermute",	\@section_empty);
##### new engines
ParseModule("_avalanche"     ,"avalanche",	\@section_empty);
ParseModule("_bbvs"     	,"bbvs",	\@section_empty);
ParseModule("_cge2"     	,"cge2",	\@section_empty);
ParseModule("_fullpipe"     ,"fullpipe",	\@section_empty);
ParseModule("_lastexpress","lastexpress",	\@section_empty);
ParseModule("_m4",		"m4",		\@section_empty);
ParseModule("_mads"			,"mads",	\@section_empty);
ParseModule("_sword25"     ,"sword25",	\@section_empty);
ParseModule("_testbed"     ,"testbed",	\@section_empty);
ParseModule("_zvision"     ,"zvision",	\@section_empty);
print "
=======================================================================================
Done. Enjoy :P
=======================================================================================
";

##################################################################################################################
##################################################################################################################

# parses multiple sections per mmp/module
sub ParseModule
{
	my ($mmp,$module,$sections,$exclusions) = @_;
	my @sections = @{$sections};
	my @exclusions = @{$exclusions};

	foreach $section (@sections)
	{
		CheckForModuleMK($module, $section, @exclusions);
		UpdateProjectFile($mmp, $module, $section);
	}
}

##################################################################################################################

# parses all module.mk files in a dir and its subdirs
sub CheckForModuleMK
{
	my ($item,$section,@exclusions) = @_;

	# if dir: check subdirs too
	if (-d $item)
	{
		#print "$item\n";

		opendir DIR, $item;
		#my @Files = readdir DIR;
		my @Files = grep s/^([^\.].*)$/$1/, readdir DIR;
		closedir DIR;

		foreach $entry (@Files)
		{
			CheckForModuleMK("$item/$entry", $section, @exclusions);
		}
	}

	# if this is a module.mk file
	if (-f $item and $item =~ /.*\/module.mk$/)
	{
		my $sec = "";
		my $isenable;
		my $ObjectsSelected = 0;
		my $ObjectsTotal = 0;

		print "$item for section '$section' ... ";

		open FILE, $item;
		my @lines = <FILE>;
		close FILE;

		my $count = @lines;
		print "$count lines";

		A: foreach $line (@lines)
		{
			# all things we need are inside #ifdef sections,
			# there is nothing we need in #ifndef sections: so ignore these for now

			# found a section? reset
			if ($line =~ /^ifdef (.*)/)
			{
				$sec = $1;
				$isenable = 1;
			}
			if ($line =~ /^ifndef (.*)/)
			{
				$sec = $1;
				$isenable = 0;
			}

			# found an object? Not uncommented!
			if (!($line =~ /^#/) && $line =~ s/\.o/.cpp/)
			{
				# handle this section?
				if ($sec eq $section)
				{
					$ObjectsTotal++;

					$line =~ s/^\s*//g; # remove possible leading whitespace
					$line =~ s/ \\//; # remove possible trailing ' \'
					$line =~ s/\//\\/g; # replace / with \
					chop($line); # remove \n

					# do we need to skip this file? According to our own @exclusions array
					foreach $exclusion (@exclusions)
					{
						if ($line =~ /$exclusion/i)
						{
							my $reason = "excluded, \@exclusions[$exclusion]";
							print "\n      ! $line ($reason)";
							$output .= "//SOURCE $line ($reason)\n";
							next A;
						}
					}

					# do we need to do this file? According to MACROs in .MMPs
					my $found = 0;
					foreach $EnableDefine (@EnabledDefines)
					{
						if (($EnableDefine eq $section) && ($section ne ''))
						{
							$found = 1;
							last;
						}
					}
					foreach $DisableDefine (@DisabledDefines)
					{
						if (($DisableDefine eq $section) && ($section ne ''))
						{
							$found = 0;
							last;
						}
					}
					# always allow non-sections
					$found = 1 if ($section eq '');
					if (!$found)
					{
						my $reason = "excluded, MACRO $section";
						print "\n         !$line ($reason)";
						$output .= "//SOURCE $line ($reason)\n";
						next A;
					}

					$ObjectsSelected++;
					#print "\n         $line";
					$output .= "SOURCE $line\n";
				}
			}
		}
		print " -- $ObjectsSelected/$ObjectsTotal objects selected\n";
	}
}

##################################################################################################################

# update an MMP project file with the new objects
sub UpdateProjectFile
{
	my ($mmp,$module,$section) = @_;
	my $n = "AUTO_OBJECTS_".uc($module)."_$section";
	my $a = "\/\/START_$n\/\/";
	my $b = "\/\/STOP_$n\/\/";
	my $updated = " Updated @ ".localtime();
	my $name;
	my @mmp_files_plus_one = @mmp_files;
	unshift @mmp_files_plus_one, "mmp/scummvm_base.mmp";

	foreach $name (@mmp_files_plus_one)
	{
		my $file = "$buildDir/$name";

		open FILE, "$file";
		my @lines = <FILE>;
		close FILE;

		my $onestr = join("",@lines);

		if ($onestr =~ /$n/)
		{

			print "      - $name @ $n updating ... ";

			$onestr =~ s/$a.*$b/$a$updated\n$output$b/s;
			open FILE, ">$file";
			print FILE $onestr;
			close FILE;

			print "done.\n";
		}
	}

	$output = "";
}

##################################################################################################################

sub UpdateSlaveMacros
{
	my $updated = " Updated @ ".localtime();

	my $name = "mmp/scummvm_base.mmp";
	my $file = "$buildDir/$name";
	print "Reading master MACROS from backends/symbian/$name ... ";

	open FILE, "$file";
	my @lines = <FILE>;
	close FILE;
	my $onestr = join("",@lines);

	my $n = "AUTO_MACROS_MASTER";
	my $a = "\/\/START_$n\/\/";
	my $b = "\/\/STOP_$n\/\/";
	$onestr =~ /$a(.*)$b/s;
	my $macros = $1;

	my $libs_first = "\n// automagically enabled static libs from macros above\n";
	my $libs_second = "STATICLIBRARY	scummvm_base.lib // must be above USE_* .libs\n";
	my $macro_counter = 0;
	my $macros2 = "\n"; # output for in *.mmp MACROS section
	my $projects = "\n..\\mmp\\scummvm_base.mmp\n"; # output for in BLD.INF projects section

	foreach $line (split("\n", $macros))
	{
		# do we need to add a static .lib?
		if ($line =~ /^.*MACRO\s*([0-9A-Z_]*)\s*\/\/\s*LIB\:(.*)$/)
		{
			my $macro = $1; my $lib = $2;

			# this macro enabled? then also add the .lib
			if ($line =~ /^\s*MACRO\s*$macro/m)
			{
				# add an USE_ lib? (these need to be added @ the beginning, before _base)
				$libs_second .= "STATICLIBRARY	$lib\n" if ($macro =~ /^USE_/);

				# add an ENABLE_ lib? (these need to be added @ the end, after _base)
				if ($macro =~ /^ENABLE_/)
				{
					$libs_first .= "STATICLIBRARY	$lib\n";

					# add projects for BLD.INF's
					my $projectname = substr("$lib",0,-4);
					$projects .= "..\\mmp\\$projectname.mmp\n";
				}
			}
			else
			{
				# skip lines not beginning with "MACRO" (like "//MACRO")
			}
			$macro_counter++;
		}

		# not commented out? then add the macro to output string
		if ($line =~ /^\s*MACRO\s*([0-9A-Z_]*)\s*/)
		{
			my $macro = $1;
			$macros2 .= "$line\n";
			if ($macro =~ /^ENABLE_/)
			{
				push @EnabledDefines, $macro; # used in CheckForModuleMK()!!
			}
			elsif ($macro =~ /^DISABLE_/)
			{
				push @DisabledDefines, $macro; # used in CheckForModuleMK()!!
			}
		}
	}

	print "$macro_counter macro lines.\n";

	$n = "AUTO_MACROS_SLAVE";
	$a = "\/\/START_$n\/\/";
	$b = "\/\/STOP_$n\/\/";

	$m = "AUTO_PROJECTS";
	$p = "\/\/START_$m\/\/";
	$q = "\/\/STOP_$m\/\/";

	foreach $name (@mmp_files)
	{
		$file = "$buildDir/$name";
		$fileBLDINF = $buildDir .'/'. substr($name, 0, rindex($name, "/")) . "/BLD.INF";
		print "Updating macros   in $file ... ";
		#print "Updating macros in backends/symbian/$name ... ";

		open FILE, "$file";	@lines = <FILE>; close FILE;
		$onestr = join("",@lines);

		my $extralibs = ""; # output
		# slash in name means it's a phone specific build file: add LIBs
		$extralibs .= "$libs_first$libs_second" if (-e $fileBLDINF);

		$onestr =~ s/$a.*$b/$a$updated$macros2$extralibs$b/s;

		open FILE, ">$file"; print FILE $onestr; close FILE;

		my $count = @lines;
		print "wrote $count lines.\n";

		if (-e $fileBLDINF)
		{
			# slash in name means it's a phone specific build file:
			# this also means we need to update a BLD.INF file here!
			print "Updating projects in $fileBLDINF ... \n";

			open FILE, "$fileBLDINF";	@lines = <FILE>; close FILE;
			$onestr = join("",@lines);

			$onestr =~ s/$p.*$q/$p$updated$projects$q/s;

			open FILE, ">$fileBLDINF"; print FILE $onestr; close FILE;
		}
	}
}

##################################################################################################################

sub ResetProjectFiles()
{
	my $onestr, @lines;
	my @mmp_files_plus_one = @mmp_files;
#	unshift @mmp_files_plus_one, "mmp/scummvm_base.mmp";

	print "Resetting project files: ";

	# we don't need to do mmp/scummvm_base.mmp", it was done in BuildPackageUpload.pl before the call to this script
	foreach $name (@mmp_files_plus_one)
	{
		my $file  = "$buildDir/$name";

		print "$name ";
		open FILE, "$file.in";	@lines = <FILE>; close FILE;
		$onestr = join("",@lines);
		open FILE, ">$file"; print FILE $onestr; close FILE;

		# also do BLD.INF if it is there...
		my $fileBLDINF = $buildDir .'/'. substr($name, 0, rindex($name, "/")) . "/BLD.INF";
		if (-e "$fileBLDINF.in")
		{
			print substr($name, 0, rindex($name, "/")) . "/BLD.INF ";
			open FILE, "$fileBLDINF.in";	@lines = <FILE>; close FILE;
			$onestr = join("",@lines);
			open FILE, ">$fileBLDINF"; print FILE $onestr; close FILE;
		}
	}

	print "... done.\n";
}

##################################################################################################################