##################################################################################################################

	@WorkingEngines = qw(
		agos agi cine cge composer cruise draci dreamweb
		drascula hugo gob groovie hopkins kyra lastexpress
		lure made mohawk mortevielle neverhood parallaction
		pegasus queen saga sci scumm sky sword1 sword2
		teenagent tinsel toltecs tony toon touche tsage
		tucker voyeur wintermute
		access avalanche bbvs cge2 fullpipe mads prince
		testbed zvision
	);
	
####	sword25 yet not added

#### In progress engines are :
####  access avalanche bbvs cge2 fullpipe mads prince
####  testbed zvision

	@WorkingEngines_1st = qw(
		cine composer cruise drascula groovie
		lastexpress made parallaction queen saga
		scumm touche tucker wintermute voyeur
		access avalanche cge2 zvision
	);

	@WorkingEngines_2nd = qw(
		agi agos cge draci dreamweb gob hopkins
		hugo kyra lure mohawk mortevielle neverhood  
		pegasus sci sky sword1 sword2 teenagent
		tinsel tsage toltecs tony toon
		bbvs fullpipe mads prince testbed
	);
####	sword25 yet not added

	@TestingEngines = qw(

	);

	@EnablableEngines = (@WorkingEngines, @TestingEngines);

	@EnablableSubEngines = qw(
		scumm_7_8
		he
		ihnm
		lol
		agos2
		eob
		cstime
		myst
		riven
		saga2
		sci32
		groovie2
	);

	#disabled subengines lol saga2 personal nightmare

	# see configure.engines
	%UseableFeatures = (
		'freetype2'		=> 'freetype.lib',
		'faad'		=> 'libFAAD2.lib',
		'flac'		=> 'libflacdec.lib',
		'jpeg'		=> 'libjpeg.lib',
		'mad'		=> 'libmad.lib',
		'mpeg2'		=> 'libmpeg2.lib',
		'png'		=> 'libpng.lib',
		'tremor'	=> 'libtremor.lib',
		'theoradec' => 'theora.lib',
		'zlib'		=> 'zlib.lib'
	);

	# these are normally enabled for each variation
	#$DefaultFeatures = qw(zlib,mad);
	#$DefaultFeatures = qw(zlib,mad,tremor,);
	$DefaultFeatures = qw(faad,flac,freetype2,jpeg,mad,mpeg2,png,theoradec,tremor,zlib,);

##################################################################################################################
	##
	## General system information, based on $COMPUTERNAME, so this way
	## you can use the same LocalSettings.pl file on multiple machines!
	##
##################################################################################################################

	if ($ENV{'COMPUTERNAME'} eq "PC-21") #########################################################################
	{
		# might use this string for file/dir naming in the future :)
		$Producer = "SumthinWicked";
		$RedirectSTDERR = 0;
		$HaltOnError = 0;
		$SkipExistingPackages = 0;
		$ReallyQuiet = 0;
		$DevBase = "D:\\Symbian";
		$Compiler = "D:\\Program/ Files\\CodeSourcery\\Sourcery/ G++ Lite";

		# specify an optional FTP server to upload to after each Build+Package (can leave empty)
		#$FTP_Host = "host.com";
		$FTP_User = "something";
		$FTP_Pass = "password";
		$FTP_Dir  = "cvsbuilds";

		# What Platform SDKs are installed on this machine?
		# possible SDKs: ("UIQ2", UIQ3", "S60v1", "S60v2", "S60v3", "S80", "S90")
		# Note1: the \epoc32 directory needs to be in these rootdirs
		# Note2: these paths do NOT end in a backslash!
	#	$SDK_RootDirs{'UIQ2'}	= "$DevBase\\UIQ_21";
	#	$SDK_RootDirs{'UIQ3'}	= "$DevBase\\UIQ3";
	#	$SDK_RootDirs{'S60v1'}	= "$DevBase\\S60v1";
	#	$SDK_RootDirs{'S60v2'}	= "$DevBase\\S60v2";
		$SDK_RootDirs{'S60v3'}	= "$DevBase\\S60v5";
	#	$SDK_RootDirs{'S80'}	= "$DevBase\\S80";
	#	$SDK_RootDirs{'S90'}	= "$DevBase\\S90";

		$SDK_ToolchainDirs{'S60v3'} = "$Compiler\\arm-symbianelf\\bin";
		$SDK_ToolchainDirs{'UIQ2'}	= "$DevBase\\ECompXL\\bin"; # only needed for UIQ2/UIQ3
		$SDK_ToolchainDirs{'UIQ3'}	= "$DevBase\\ECompXL\\bin"; # only needed for UIQ2/UIQ3

		# these supporting libraries get built first, then all the Variations
		# Note: the string {'xxx.lib'} is used in checking in build success: so needs to be accurate!
		if (0) # so we can turn them on/off easily
		{
			## Standard libraries
			$SDK_LibraryDirs{'ALL'}{'zlib.lib'}		= "$DevBase\\zlib-1.2.2\\epoc";
			$SDK_LibraryDirs{'ALL'}{'libmad.lib'}	= "$DevBase\\libmad-0.15.1b\\group";
			$SDK_LibraryDirs{'ALL'}{'libtremor.lib'}= "$DevBase\\tremor\\epoc";

			## SDL 1.2.12 / AnotherGuest / Symbian version
			my $SdlBase = "$DevBase\\SDL-1.2.12-ag\\Symbian";
			#$SDK_LibraryDirs{'S60v1'}{'esdl.lib'}	= "$SdlBase\\S60"; // unsupported?
			#$SDK_LibraryDirs{'S60v2'}{'esdl.lib'}	= "$SdlBase\\S60v2";
			$SDK_LibraryDirs{'S60v3'}{'esdl.lib'}	= "$SdlBase\\S60v5";
			#$SDK_LibraryDirs{'S80'}{'esdl.lib'}	= "$SdlBase\\S80";
			#$SDK_LibraryDirs{'S90'}{'esdl.lib'}	= "$SdlBase\\S90";
			#$SDK_LibraryDirs{'UIQ2'}{'esdl.lib'}	= "$SdlBase\\UIQ2"
			#$SDK_LibraryDirs{'UIQ3'}{'esdl.lib'}	= "$SdlBase\\UIQ3";
		}

		# now you can add $VariationSets only built on this PC below this line :)

		#$VariationSets{'ALL'}{'scumm'} = "$DefaultFeatures scumm scumm_7_8 he";
		#$VariationSets{'ALL'}{'all'} = "$DefaultFeatures @WorkingEngines @EnablableSubEngines";

	}
	elsif ($ENV{'COMPUTERNAME'} eq "TSSLND0106") #################################################################
	{
		$Producer = "AnotherGuest";
		$RedirectSTDERR = 1;
		$HaltOnError = 0;
		$SkipExistingPackages = 0;
		$ReallyQuiet = 0;

		#$FTP_Host = "host.com";
		#$FTP_User = "ag@host.com";
		#$FTP_Pass = "password";
		#$FTP_Dir  = "cvsbuilds";

		#$SDK_RootDirs{'UIQ2'}= "C:\\UIQ2";
		$SDK_RootDirs{'UIQ3'}= "C:\\UIQ3";
		#$SDK_RootDirs{'S60v1'}= "C:\\S60v1";
		$SDK_RootDirs{'S60v2'}= "C:\\S60v2";
		$SDK_RootDirs{'S60v3'}= "C:\\S60v3";
		#$SDK_RootDirs{'S80'}= "C:\\S80";
		#$SDK_RootDirs{'S90'}= "C:\\S90";
		$ECompXL_BinDir= "C:\\ECompXL\\";
		if (0) # so we can turn them on/off easily
		{
#			$SDK_LibraryDirs{'ALL'}{'zlib.lib'}		= "C:\\S\\zlib-1.2.2\\epoc";
#			$SDK_LibraryDirs{'ALL'}{'libmad.lib'}	= "C:\\S\\libmad-0.15.1b\\group";
			$SDK_LibraryDirs{'ALL'}{'libtremor.lib'}= "C:\\tremor\\epoc";
#			$SDK_LibraryDirs{'UIQ2'}{'esdl.lib'}	= $SDK_LibraryDirs{'UIQ3'}{'esdl.lib'} = "C:\\S\\ESDL\\epoc\\UIQ";
#			$SDK_LibraryDirs{'S60v1'}{'esdl.lib'}	= $SDK_LibraryDirs{'S60v2'}{'esdl.lib'} = $SDK_LibraryDirs{'S60v3'}{'esdl.lib'} = "C:\\S\\ESDL\\epoc\\S60";
#			$SDK_LibraryDirs{'S80'}{'esdl.lib'}		= "C:\\S\\ESDL\\epoc\\S80";
#			$SDK_LibraryDirs{'S90'}{'esdl.lib'}		= "C:\\S\\ESDL\\epoc\\S90";
		}

		# now you can add $VariationSets only built on this PC below this line :)

	}
	elsif ($ENV{'COMPUTERNAME'} eq "BIGMACHINE") #################################################################
	{
		$Producer = "AnotherGuest";
		$RedirectSTDERR = 1;
		$HaltOnError = 0;
		$SkipExistingPackages = 1;
		$ReallyQuiet = 1;

		#$FTP_Host = "host.com";
		#$FTP_User = "ag@host.com";
		#$FTP_Pass = "password";
		#$FTP_Dir  = "cvsbuilds";

		#$SDK_RootDirs{'UIQ2'}= "D:\\UIQ2";
		$SDK_RootDirs{'UIQ3'}= "D:\\UIQ3";
		#$SDK_RootDirs{'S60v1'}= "D:\\S60v1";
		#$SDK_RootDirs{'S60v2'}= "D:\\S60v2";
		$SDK_RootDirs{'S60v3'}= "D:\\S60v3";
		#$SDK_RootDirs{'S80'}= "D:\\S80";
		#$SDK_RootDirs{'S90'}= "D:\\S90";
		$ECompXL_BinDir= "D:\\ECompXL\\";
		if (0) # so we can turn them on/off easily
		{
#			$SDK_LibraryDirs{'ALL'}{'zlib.lib'}		= "C:\\S\\zlib-1.2.2\\epoc";
#			$SDK_LibraryDirs{'ALL'}{'libmad.lib'}	= "C:\\S\\libmad-0.15.1b\\group";
#			$SDK_LibraryDirs{'ALL'}{'libtremor.lib'}= "C:\\tremor\\epoc";
			$SDK_LibraryDirs{'UIQ2'}{'esdl.lib'} = "E:\\WICKED\\ESDL\\epoc\\UIQ";
			$SDK_LibraryDirs{'S60v1'}{'esdl.lib'}	= $SDK_LibraryDirs{'S60v2'}{'esdl.lib'} = "E:\\WICKED\\ESDL\\epoc\\S60";
			$SDK_LibraryDirs{'S80'}{'esdl.lib'}		= "E:\\WICKED\\ESDL\\epoc\\S80";
			$SDK_LibraryDirs{'S90'}{'esdl.lib'}		= "E:\\WICKED\\ESDL\\epoc\\S90";
			$SDK_LibraryDirs{'S60v3'}{'esdl.lib'}		= "E:\\WICKED\\ESDL\\epoc\\S60\\S60V3";
			$SDK_LibraryDirs{'UIQ3'}{'esdl.lib'}		= "E:\\WICKED\\ESDL\\epoc\\UIQ\\UIQ3";
		}

		# now you can add $VariationSets only built on this PC below this line :)

	}
	elsif ($ENV{'COMPUTERNAME'} eq "EMBEDDEV-VAIO2") #################################################################
	{
		$Producer = "AnotherGuest";
		$RedirectSTDERR = 1;
		$HaltOnError = 0;
		$SkipExistingPackages = 1;
		$ReallyQuiet = 1;

		#$FTP_Host = "host.com";
		#$FTP_User = "ag@host.com";
		#$FTP_Pass = "password";
		#$FTP_Dir  = "cvsbuilds";

		#$SDK_RootDirs{'UIQ2'}= "D:\\UIQ2";
		$SDK_RootDirs{'UIQ3'}= "G:\\UIQ3";
		#$SDK_RootDirs{'S60v1'}= "D:\\S60v1";
		#$SDK_RootDirs{'S60v2'}= "D:\\S60v2";
		$SDK_RootDirs{'S60v3'}= "G:\\S60v5";
		#$SDK_RootDirs{'S80'}= "D:\\S80";
		#$SDK_RootDirs{'S90'}= "D:\\S90";
		#$ECompXL_BinDir= "D:\\ECompXL\\";
		if (0) # so we can turn them on/off easily
		{
#			$SDK_LibraryDirs{'ALL'}{'zlib.lib'}		= "C:\\S\\zlib-1.2.2\\epoc";
#			$SDK_LibraryDirs{'ALL'}{'libmad.lib'}	= "C:\\S\\libmad-0.15.1b\\group";
#			$SDK_LibraryDirs{'ALL'}{'libtremor.lib'}= "C:\\tremor\\epoc";
			$SDK_LibraryDirs{'UIQ2'}{'esdl.lib'} = "E:\\WICKED\\ESDL\\epoc\\UIQ";
			$SDK_LibraryDirs{'S60v1'}{'esdl.lib'}	= $SDK_LibraryDirs{'S60v2'}{'esdl.lib'} = "E:\\WICKED\\ESDL\\epoc\\S60";
			$SDK_LibraryDirs{'S80'}{'esdl.lib'}		= "E:\\WICKED\\ESDL\\epoc\\S80";
			$SDK_LibraryDirs{'S90'}{'esdl.lib'}		= "E:\\WICKED\\ESDL\\epoc\\S90";
			$SDK_LibraryDirs{'S60v3'}{'esdl.lib'}		= "E:\\WICKED\\ESDL\\epoc\\S60\\S60V3";
			$SDK_LibraryDirs{'UIQ3'}{'esdl.lib'}		= "E:\\WICKED\\ESDL\\epoc\\UIQ\\UIQ3";
		}

		# now you can add $VariationSets only built on this PC below this line :)

	}
	elsif ($ENV{'COMPUTERNAME'} eq "FEDOR4EVER") #################################################################
	{
		$Producer = "Fedor";
		$RedirectSTDERR = 1;
		$HaltOnError = 0;
		$SkipExistingPackages = 0;
		$ReallyQuiet = 0;
		$Compiler = "D:\\Program/ Files\\CodeSourcery\\Sourcery/ G++/ Lite";

		#$FTP_Host = "host.com";
		#$FTP_User = "ag@host.com";
		#$FTP_Pass = "password";
		#$FTP_Dir  = "cvsbuilds";

		#$SDK_RootDirs{'UIQ2'}= "C:\\UIQ2";
		#$SDK_RootDirs{'UIQ3'}= "C:\\UIQ3";
		#$SDK_RootDirs{'S60v1'}= "C:\\S60v1";
		#$SDK_RootDirs{'S60v2'}= "C:\\S60v2";
		#$SDK_RootDirs{'S80'}= "C:\\S80";
		#$SDK_RootDirs{'S90'}= "C:\\S90";
		#$ECompXL_BinDir= "C:\\ECompXL\\";

		$SDK_RootDirs{'S60v3'}= "D:\\Symbian\\S60_5th_Edition_SDK_v1.0";
		$SDK_ToolchainDirs{'S60v3'} = "$Compiler\\arm-symbianelf\\bin";

		# these supporting libraries get built first, then all the Variations
		# Note: the string {'xxx.lib'} is used in checking in build success: so needs to be accurate!
		if (0) # so we can turn them on/off easily
		{
#			$SDK_LibraryDirs{'ALL'}{'zlib.lib'}		= "C:\\S\\zlib-1.2.2\\epoc";
			$SDK_LibraryDirs{'ALL'}{'libmad.lib'}	= "D:\\Symbian\\Projects\\SDL\\libs\\libmad-0.15.1b\\epoc";
#			$SDK_LibraryDirs{'ALL'}{'libtremor.lib'}= "D:\\Symbian\\Projects\\SDL\\libs\\Tremor\\epoc";
#			$SDK_LibraryDirs{'UIQ2'}{'esdl.lib'}	= $SDK_LibraryDirs{'UIQ3'}{'esdl.lib'} = "C:\\S\\ESDL\\epoc\\UIQ";
#			$SDK_LibraryDirs{'S60v1'}{'esdl.lib'}	= $SDK_LibraryDirs{'S60v2'}{'esdl.lib'} = $SDK_LibraryDirs{'S60v3'}{'esdl.lib'} = "C:\\S\\ESDL\\epoc\\S60";
#			$SDK_LibraryDirs{'S80'}{'esdl.lib'}		= "C:\\S\\ESDL\\epoc\\S80";
#			$SDK_LibraryDirs{'S90'}{'esdl.lib'}		= "C:\\S\\ESDL\\epoc\\S90";
		}

		# now you can add $VariationSets only built on this PC below this line :)

	}

	else #########################################################################################################
	{
		print "ERROR: Computer name ".$ENV{'COMPUTERNAME'}." not recognized! Plz edit _LocalSettings.pl!";
		exit 1;
	}

##################################################################################################################
	##
	## Variation defines:
	##
##################################################################################################################

	# second hash index = literal string used in .sis file created.
	# empty string also removes the trailing '_'. Some 051101 examples:

	# $VariationSets{'UIQ2'}{''} would produce:
	#   scummvm-051101-SymbianUIQ2.sis

	# $VariationSets{'S60v2'}{'agos'} would produce:
	#   scummvm-051101-SymbianS60v2_agos.sis

	# $VariationSets{'ALL'}{'queen'} with all $SDK_RootDirs defined would produce:
	#   scummvm-051101-SymbianUIQ2_queen.sis
	#   scummvm-051101-SymbianUIQ3_queen.sis
	#   scummvm-051101-SymbianS60v1_queen.sis
	#   scummvm-051101-SymbianS60v2_queen.sis
	#   scummvm-051101-SymbianS60v3_queen.sis
	#   scummvm-051101-SymbianS80_queen.sis
	#   scummvm-051101-SymbianS90_queen.sis

	# NOTE: empty $VariationSets{''} string instead of 'ALL' = easy way to disable pkg!

	if (1) # all regular combo's
	{
		# the first one includes all SDKs & release-ready engines

			# $VariationSets{'ALL'}{'all'} = "$DefaultFeatures @WorkingEngines @EnablableSubEngines";
			$VariationSets{'ALL'}{'split'} = "$DefaultFeatures @WorkingEngines @EnablableSubEngines";
			# $VariationSets{'ALL'}{'1St'} = "$DefaultFeatures @WorkingEngines_1st @EnablableSubEngines";
			# $VariationSets{'ALL'}{'2nd'} = "$DefaultFeatures @WorkingEngines_2nd @EnablableSubEngines";
		# now one for each ready-for-release engine
		if (0)
		{
			foreach (@WorkingEngines)
			{
				$VariationSets{'ALL'}{$_} = "$DefaultFeatures $_";
			}
			# for scumm, we need to add 2 features:
			#$VariationSets{'ALL'}{'scumm'} .= " scumm_7_8 he";
		}

		# now one for each not-ready-for-release-or-testing engine
		if (0)
		{
			foreach (@TestingEngines)
			{
				$VariationSets{'ALL'}{"test_$_"} = "$DefaultFeatures $_";
			}
		}
		# below here you could specify weird & experimental combinations, non-ready engines

			# Separate version for the broken sword engines (1&2)
			#$VariationSets{'ALL'}{'brokensword'} = "$DefaultFeatures sword1 sword2";

			# Separate version for Scumm games (COMI) since memory usage might be high
			#$VariationSets{'ALL'}{'scumm'} = "$DefaultFeatures scumm scumm_7_8 he";

			# for mega-fast-testing only plz! Warning: contains to engines!
			#$VariationSets{'ALL'}{'fast_empty'} = "";

	} # end quick-n-fast if (1|0)


##################################################################################################################

1;