diff options
| -rw-r--r-- | Makefile | 1 | ||||
| -rw-r--r-- | libretro/zconf.h | 511 | ||||
| -rw-r--r-- | libretro/zlib.h | 1763 | ||||
| -rw-r--r-- | src/ioapi.c | 177 | ||||
| -rw-r--r-- | src/ioapi.h | 75 | ||||
| -rw-r--r-- | src/loadzip.cpp | 222 | ||||
| -rw-r--r-- | src/memmap.cpp | 11 | ||||
| -rw-r--r-- | src/port.h | 5 | ||||
| -rw-r--r-- | src/snes9x.h | 2 | ||||
| -rw-r--r-- | src/spc700/debug/port.h | 2 | ||||
| -rw-r--r-- | src/unzip.c | 1598 | ||||
| -rw-r--r-- | src/unzip.h | 356 | ||||
| -rw-r--r-- | src/zip.c | 1218 | ||||
| -rw-r--r-- | src/zip.h | 237 |
14 files changed, 4 insertions, 6174 deletions
@@ -88,7 +88,6 @@ OBJECTS += ./src/dsp1.o OBJECTS += ./src/fxemu.o OBJECTS += ./src/fxinst.o OBJECTS += ./src/globals.o -OBJECTS += ./src/loadzip.o OBJECTS += ./src/ppu.o OBJECTS += ./src/dma.o OBJECTS += ./src/memmap.o diff --git a/libretro/zconf.h b/libretro/zconf.h deleted file mode 100644 index 9987a77..0000000 --- a/libretro/zconf.h +++ /dev/null @@ -1,511 +0,0 @@ -/* zconf.h -- configuration of the zlib compression library - * Copyright (C) 1995-2013 Jean-loup Gailly. - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* @(#) $Id$ */ - -#ifndef ZCONF_H -#define ZCONF_H - -/* - * If you *really* need a unique prefix for all types and library functions, - * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it. - * Even better than compiling with -DZ_PREFIX would be to use configure to set - * this permanently in zconf.h using "./configure --zprefix". - */ -#ifdef Z_PREFIX /* may be set to #if 1 by ./configure */ -# define Z_PREFIX_SET - -/* all linked symbols */ -# define _dist_code z__dist_code -# define _length_code z__length_code -# define _tr_align z__tr_align -# define _tr_flush_bits z__tr_flush_bits -# define _tr_flush_block z__tr_flush_block -# define _tr_init z__tr_init -# define _tr_stored_block z__tr_stored_block -# define _tr_tally z__tr_tally -# define adler32 z_adler32 -# define adler32_combine z_adler32_combine -# define adler32_combine64 z_adler32_combine64 -# ifndef Z_SOLO -# define compress z_compress -# define compress2 z_compress2 -# define compressBound z_compressBound -# endif -# define crc32 z_crc32 -# define crc32_combine z_crc32_combine -# define crc32_combine64 z_crc32_combine64 -# define deflate z_deflate -# define deflateBound z_deflateBound -# define deflateCopy z_deflateCopy -# define deflateEnd z_deflateEnd -# define deflateInit2_ z_deflateInit2_ -# define deflateInit_ z_deflateInit_ -# define deflateParams z_deflateParams -# define deflatePending z_deflatePending -# define deflatePrime z_deflatePrime -# define deflateReset z_deflateReset -# define deflateResetKeep z_deflateResetKeep -# define deflateSetDictionary z_deflateSetDictionary -# define deflateSetHeader z_deflateSetHeader -# define deflateTune z_deflateTune -# define deflate_copyright z_deflate_copyright -# define get_crc_table z_get_crc_table -# ifndef Z_SOLO -# define gz_error z_gz_error -# define gz_intmax z_gz_intmax -# define gz_strwinerror z_gz_strwinerror -# define gzbuffer z_gzbuffer -# define gzclearerr z_gzclearerr -# define gzclose z_gzclose -# define gzclose_r z_gzclose_r -# define gzclose_w z_gzclose_w -# define gzdirect z_gzdirect -# define gzdopen z_gzdopen -# define gzeof z_gzeof -# define gzerror z_gzerror -# define gzflush z_gzflush -# define gzgetc z_gzgetc -# define gzgetc_ z_gzgetc_ -# define gzgets z_gzgets -# define gzoffset z_gzoffset -# define gzoffset64 z_gzoffset64 -# define gzopen z_gzopen -# define gzopen64 z_gzopen64 -# ifdef _WIN32 -# define gzopen_w z_gzopen_w -# endif -# define gzprintf z_gzprintf -# define gzvprintf z_gzvprintf -# define gzputc z_gzputc -# define gzputs z_gzputs -# define gzread z_gzread -# define gzrewind z_gzrewind -# define gzseek z_gzseek -# define gzseek64 z_gzseek64 -# define gzsetparams z_gzsetparams -# define gztell z_gztell -# define gztell64 z_gztell64 -# define gzungetc z_gzungetc -# define gzwrite z_gzwrite -# endif -# define inflate z_inflate -# define inflateBack z_inflateBack -# define inflateBackEnd z_inflateBackEnd -# define inflateBackInit_ z_inflateBackInit_ -# define inflateCopy z_inflateCopy -# define inflateEnd z_inflateEnd -# define inflateGetHeader z_inflateGetHeader -# define inflateInit2_ z_inflateInit2_ -# define inflateInit_ z_inflateInit_ -# define inflateMark z_inflateMark -# define inflatePrime z_inflatePrime -# define inflateReset z_inflateReset -# define inflateReset2 z_inflateReset2 -# define inflateSetDictionary z_inflateSetDictionary -# define inflateGetDictionary z_inflateGetDictionary -# define inflateSync z_inflateSync -# define inflateSyncPoint z_inflateSyncPoint -# define inflateUndermine z_inflateUndermine -# define inflateResetKeep z_inflateResetKeep -# define inflate_copyright z_inflate_copyright -# define inflate_fast z_inflate_fast -# define inflate_table z_inflate_table -# ifndef Z_SOLO -# define uncompress z_uncompress -# endif -# define zError z_zError -# ifndef Z_SOLO -# define zcalloc z_zcalloc -# define zcfree z_zcfree -# endif -# define zlibCompileFlags z_zlibCompileFlags -# define zlibVersion z_zlibVersion - -/* all zlib typedefs in zlib.h and zconf.h */ -# define Byte z_Byte -# define Bytef z_Bytef -# define alloc_func z_alloc_func -# define charf z_charf -# define free_func z_free_func -# ifndef Z_SOLO -# define gzFile z_gzFile -# endif -# define gz_header z_gz_header -# define gz_headerp z_gz_headerp -# define in_func z_in_func -# define intf z_intf -# define out_func z_out_func -# define uInt z_uInt -# define uIntf z_uIntf -# define uLong z_uLong -# define uLongf z_uLongf -# define voidp z_voidp -# define voidpc z_voidpc -# define voidpf z_voidpf - -/* all zlib structs in zlib.h and zconf.h */ -# define gz_header_s z_gz_header_s -# define internal_state z_internal_state - -#endif - -#if defined(__MSDOS__) && !defined(MSDOS) -# define MSDOS -#endif -#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2) -# define OS2 -#endif -#if defined(_WINDOWS) && !defined(WINDOWS) -# define WINDOWS -#endif -#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__) -# ifndef WIN32 -# define WIN32 -# endif -#endif -#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32) -# if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__) -# ifndef SYS16BIT -# define SYS16BIT -# endif -# endif -#endif - -/* - * Compile with -DMAXSEG_64K if the alloc function cannot allocate more - * than 64k bytes at a time (needed on systems with 16-bit int). - */ -#ifdef SYS16BIT -# define MAXSEG_64K -#endif -#ifdef MSDOS -# define UNALIGNED_OK -#endif - -#ifdef __STDC_VERSION__ -# ifndef STDC -# define STDC -# endif -# if __STDC_VERSION__ >= 199901L -# ifndef STDC99 -# define STDC99 -# endif -# endif -#endif -#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus)) -# define STDC -#endif -#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__)) -# define STDC -#endif -#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32)) -# define STDC -#endif -#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__)) -# define STDC -#endif - -#if defined(__OS400__) && !defined(STDC) /* iSeries (formerly AS/400). */ -# define STDC -#endif - -#ifndef STDC -# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */ -# define const /* note: need a more gentle solution here */ -# endif -#endif - -#if defined(ZLIB_CONST) && !defined(z_const) -# define z_const const -#else -# define z_const -#endif - -/* Some Mac compilers merge all .h files incorrectly: */ -#if defined(__MWERKS__)||defined(applec)||defined(THINK_C)||defined(__SC__) -# define NO_DUMMY_DECL -#endif - -/* Maximum value for memLevel in deflateInit2 */ -#ifndef MAX_MEM_LEVEL -# ifdef MAXSEG_64K -# define MAX_MEM_LEVEL 8 -# else -# define MAX_MEM_LEVEL 9 -# endif -#endif - -/* Maximum value for windowBits in deflateInit2 and inflateInit2. - * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files - * created by gzip. (Files created by minigzip can still be extracted by - * gzip.) - */ -#ifndef MAX_WBITS -# define MAX_WBITS 15 /* 32K LZ77 window */ -#endif - -/* The memory requirements for deflate are (in bytes): - (1 << (windowBits+2)) + (1 << (memLevel+9)) - that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values) - plus a few kilobytes for small objects. For example, if you want to reduce - the default memory requirements from 256K to 128K, compile with - make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7" - Of course this will generally degrade compression (there's no free lunch). - - The memory requirements for inflate are (in bytes) 1 << windowBits - that is, 32K for windowBits=15 (default value) plus a few kilobytes - for small objects. -*/ - - /* Type declarations */ - -#ifndef OF /* function prototypes */ -# ifdef STDC -# define OF(args) args -# else -# define OF(args) () -# endif -#endif - -#ifndef Z_ARG /* function prototypes for stdarg */ -# if defined(STDC) || defined(Z_HAVE_STDARG_H) -# define Z_ARG(args) args -# else -# define Z_ARG(args) () -# endif -#endif - -/* The following definitions for FAR are needed only for MSDOS mixed - * model programming (small or medium model with some far allocations). - * This was tested only with MSC; for other MSDOS compilers you may have - * to define NO_MEMCPY in zutil.h. If you don't need the mixed model, - * just define FAR to be empty. - */ -#ifdef SYS16BIT -# if defined(M_I86SM) || defined(M_I86MM) - /* MSC small or medium model */ -# define SMALL_MEDIUM -# ifdef _MSC_VER -# define FAR _far -# else -# define FAR far -# endif -# endif -# if (defined(__SMALL__) || defined(__MEDIUM__)) - /* Turbo C small or medium model */ -# define SMALL_MEDIUM -# ifdef __BORLANDC__ -# define FAR _far -# else -# define FAR far -# endif -# endif -#endif - -#if defined(WINDOWS) || defined(WIN32) - /* If building or using zlib as a DLL, define ZLIB_DLL. - * This is not mandatory, but it offers a little performance increase. - */ -# ifdef ZLIB_DLL -# if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500)) -# ifdef ZLIB_INTERNAL -# define ZEXTERN extern __declspec(dllexport) -# else -# define ZEXTERN extern __declspec(dllimport) -# endif -# endif -# endif /* ZLIB_DLL */ - /* If building or using zlib with the WINAPI/WINAPIV calling convention, - * define ZLIB_WINAPI. - * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI. - */ -# ifdef ZLIB_WINAPI -# ifdef FAR -# undef FAR -# endif -# include <windows.h> - /* No need for _export, use ZLIB.DEF instead. */ - /* For complete Windows compatibility, use WINAPI, not __stdcall. */ -# define ZEXPORT WINAPI -# ifdef WIN32 -# define ZEXPORTVA WINAPIV -# else -# define ZEXPORTVA FAR CDECL -# endif -# endif -#endif - -#if defined (__BEOS__) -# ifdef ZLIB_DLL -# ifdef ZLIB_INTERNAL -# define ZEXPORT __declspec(dllexport) -# define ZEXPORTVA __declspec(dllexport) -# else -# define ZEXPORT __declspec(dllimport) -# define ZEXPORTVA __declspec(dllimport) -# endif -# endif -#endif - -#ifndef ZEXTERN -# define ZEXTERN extern -#endif -#ifndef ZEXPORT -# define ZEXPORT -#endif -#ifndef ZEXPORTVA -# define ZEXPORTVA -#endif - -#ifndef FAR -# define FAR -#endif - -#if !defined(__MACTYPES__) -typedef unsigned char Byte; /* 8 bits */ -#endif -typedef unsigned int uInt; /* 16 bits or more */ -typedef unsigned long uLong; /* 32 bits or more */ - -#ifdef SMALL_MEDIUM - /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */ -# define Bytef Byte FAR -#else - typedef Byte FAR Bytef; -#endif -typedef char FAR charf; -typedef int FAR intf; -typedef uInt FAR uIntf; -typedef uLong FAR uLongf; - -#ifdef STDC - typedef void const *voidpc; - typedef void FAR *voidpf; - typedef void *voidp; -#else - typedef Byte const *voidpc; - typedef Byte FAR *voidpf; - typedef Byte *voidp; -#endif - -#if !defined(Z_U4) && !defined(Z_SOLO) && defined(STDC) -# include <limits.h> -# if (UINT_MAX == 0xffffffffUL) -# define Z_U4 unsigned -# elif (ULONG_MAX == 0xffffffffUL) -# define Z_U4 unsigned long -# elif (USHRT_MAX == 0xffffffffUL) -# define Z_U4 unsigned short -# endif -#endif - -#ifdef Z_U4 - typedef Z_U4 z_crc_t; -#else - typedef unsigned long z_crc_t; -#endif - -#ifdef HAVE_UNISTD_H /* may be set to #if 1 by ./configure */ -# define Z_HAVE_UNISTD_H -#endif - -#ifdef HAVE_STDARG_H /* may be set to #if 1 by ./configure */ -# define Z_HAVE_STDARG_H -#endif - -#ifdef STDC -# ifndef Z_SOLO -# include <sys/types.h> /* for off_t */ -# endif -#endif - -#if defined(STDC) || defined(Z_HAVE_STDARG_H) -# ifndef Z_SOLO -# include <stdarg.h> /* for va_list */ -# endif -#endif - -#ifdef _WIN32 -# ifndef Z_SOLO -# include <stddef.h> /* for wchar_t */ -# endif -#endif - -/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and - * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even - * though the former does not conform to the LFS document), but considering - * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as - * equivalently requesting no 64-bit operations - */ -#if defined(_LARGEFILE64_SOURCE) && -_LARGEFILE64_SOURCE - -1 == 1 -# undef _LARGEFILE64_SOURCE -#endif - -#if defined(__WATCOMC__) && !defined(Z_HAVE_UNISTD_H) -# define Z_HAVE_UNISTD_H -#endif -#ifndef Z_SOLO -# if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE) -# include <unistd.h> /* for SEEK_*, off_t, and _LFS64_LARGEFILE */ -# ifdef VMS -# include <unixio.h> /* for off_t */ -# endif -# ifndef z_off_t -# define z_off_t off_t -# endif -# endif -#endif - -#if defined(_LFS64_LARGEFILE) && _LFS64_LARGEFILE-0 -# define Z_LFS64 -#endif - -#if defined(_LARGEFILE64_SOURCE) && defined(Z_LFS64) -# define Z_LARGE64 -#endif - -#if defined(_FILE_OFFSET_BITS) && _FILE_OFFSET_BITS-0 == 64 && defined(Z_LFS64) -# define Z_WANT64 -#endif - -#if !defined(SEEK_SET) && !defined(Z_SOLO) -# define SEEK_SET 0 /* Seek from beginning of file. */ -# define SEEK_CUR 1 /* Seek from current position. */ -# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */ -#endif - -#ifndef z_off_t -# define z_off_t long -#endif - -#if !defined(_WIN32) && defined(Z_LARGE64) -# define z_off64_t off64_t -#else -# if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO) -# define z_off64_t __int64 -# else -# define z_off64_t z_off_t -# endif -#endif - -/* MVS linker does not support external names larger than 8 bytes */ -#if defined(__MVS__) - #pragma map(deflateInit_,"DEIN") - #pragma map(deflateInit2_,"DEIN2") - #pragma map(deflateEnd,"DEEND") - #pragma map(deflateBound,"DEBND") - #pragma map(inflateInit_,"ININ") - #pragma map(inflateInit2_,"ININ2") - #pragma map(inflateEnd,"INEND") - #pragma map(inflateSync,"INSY") - #pragma map(inflateSetDictionary,"INSEDI") - #pragma map(compressBound,"CMBND") - #pragma map(inflate_table,"INTABL") - #pragma map(inflate_fast,"INFA") - #pragma map(inflate_copyright,"INCOPY") -#endif - -#endif /* ZCONF_H */ diff --git a/libretro/zlib.h b/libretro/zlib.h deleted file mode 100644 index aa5935d..0000000 --- a/libretro/zlib.h +++ /dev/null @@ -1,1763 +0,0 @@ -/* zlib.h -- interface of the 'zlib' general purpose compression library - version 1.2.8, April 28th, 2013 - - Copyright (C) 1995-2013 Jean-loup Gailly and Mark Adler - - This software is provided 'as-is', without any express or implied - warranty. In no event will the authors be held liable for any damages - arising from the use of this software. - - Permission is granted to anyone to use this software for any purpose, - including commercial applications, and to alter it and redistribute it - freely, subject to the following restrictions: - - 1. The origin of this software must not be misrepresented; you must not - claim that you wrote the original software. If you use this software - in a product, an acknowledgment in the product documentation would be - appreciated but is not required. - 2. Altered source versions must be plainly marked as such, and must not be - misrepresented as being the original software. - 3. This notice may not be removed or altered from any source distribution. - - Jean-loup Gailly Mark Adler - jloup@gzip.org madler@alumni.caltech.edu - - - The data format used by the zlib library is described by RFCs (Request for - Comments) 1950 to 1952 in the files http://tools.ietf.org/html/rfc1950 - (zlib format), rfc1951 (deflate format) and rfc1952 (gzip format). -*/ - -#ifndef ZLIB_H -#define ZLIB_H - -#include "zconf.h" - -#ifdef __cplusplus -extern "C" { -#endif - -#define ZLIB_VERSION "1.2.8" -#define ZLIB_VERNUM 0x1280 -#define ZLIB_VER_MAJOR 1 -#define ZLIB_VER_MINOR 2 -#define ZLIB_VER_REVISION 8 -#define ZLIB_VER_SUBREVISION 0 - -/* - The 'zlib' compression library provides in-memory compression and - decompression functions, including integrity checks of the uncompressed data. - This version of the library supports only one compression method (deflation) - but other algorithms will be added later and will have the same stream - interface. - - Compression can be done in a single step if the buffers are large enough, - or can be done by repeated calls of the compression function. In the latter - case, the application must provide more input and/or consume the output - (providing more output space) before each call. - - The compressed data format used by default by the in-memory functions is - the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped - around a deflate stream, which is itself documented in RFC 1951. - - The library also supports reading and writing files in gzip (.gz) format - with an interface similar to that of stdio using the functions that start - with "gz". The gzip format is different from the zlib format. gzip is a - gzip wrapper, documented in RFC 1952, wrapped around a deflate stream. - - This library can optionally read and write gzip streams in memory as well. - - The zlib format was designed to be compact and fast for use in memory - and on communications channels. The gzip format was designed for single- - file compression on file systems, has a larger header than zlib to maintain - directory information, and uses a different, slower check method than zlib. - - The library does not install any signal handler. The decoder checks - the consistency of the compressed data, so the library should never crash - even in case of corrupted input. -*/ - -typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size)); -typedef void (*free_func) OF((voidpf opaque, voidpf address)); - -struct internal_state; - -typedef struct z_stream_s { - z_const Bytef *next_in; /* next input byte */ - uInt avail_in; /* number of bytes available at next_in */ - uLong total_in; /* total number of input bytes read so far */ - - Bytef *next_out; /* next output byte should be put there */ - uInt avail_out; /* remaining free space at next_out */ - uLong total_out; /* total number of bytes output so far */ - - z_const char *msg; /* last error message, NULL if no error */ - void *state; /* not visible by applications */ - - alloc_func zalloc; /* used to allocate the internal state */ - free_func zfree; /* used to free the internal state */ - voidpf opaque; /* private data object passed to zalloc and zfree */ - - int data_type; /* best guess about the data type: binary or text */ - uLong adler; /* adler32 value of the uncompressed data */ - uLong reserved; /* reserved for future use */ -} z_stream; - -typedef z_stream FAR *z_streamp; - -/* - gzip header information passed to and from zlib routines. See RFC 1952 - for more details on the meanings of these fields. -*/ -typedef struct gz_header_s { - int text; /* true if compressed data believed to be text */ - uLong time; /* modification time */ - int xflags; /* extra flags (not used when writing a gzip file) */ - int os; /* operating system */ - Bytef *extra; /* pointer to extra field or Z_NULL if none */ - uInt extra_len; /* extra field length (valid if extra != Z_NULL) */ - uInt extra_max; /* space at extra (only when reading header) */ - Bytef *name; /* pointer to zero-terminated file name or Z_NULL */ - uInt name_max; /* space at name (only when reading header) */ - Bytef *comment; /* pointer to zero-terminated comment or Z_NULL */ - uInt comm_max; /* space at comment (only when reading header) */ - int hcrc; /* true if there was or will be a header crc */ - int done; /* true when done reading gzip header (not used - when writing a gzip file) */ -} gz_header; - -typedef gz_header FAR *gz_headerp; - -/* - The application must update next_in and avail_in when avail_in has dropped - to zero. It must update next_out and avail_out when avail_out has dropped - to zero. The application must initialize zalloc, zfree and opaque before - calling the init function. All other fields are set by the compression - library and must not be updated by the application. - - The opaque value provided by the application will be passed as the first - parameter for calls of zalloc and zfree. This can be useful for custom - memory management. The compression library attaches no meaning to the - opaque value. - - zalloc must return Z_NULL if there is not enough memory for the object. - If zlib is used in a multi-threaded application, zalloc and zfree must be - thread safe. - - On 16-bit systems, the functions zalloc and zfree must be able to allocate - exactly 65536 bytes, but will not be required to allocate more than this if - the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, pointers - returned by zalloc for objects of exactly 65536 bytes *must* have their - offset normalized to zero. The default allocation function provided by this - library ensures this (see zutil.c). To reduce memory requirements and avoid - any allocation of 64K objects, at the expense of compression ratio, compile - the library with -DMAX_WBITS=14 (see zconf.h). - - The fields total_in and total_out can be used for statistics or progress - reports. After compression, total_in holds the total size of the - uncompressed data and may be saved for use in the decompressor (particularly - if the decompressor wants to decompress everything in a single step). -*/ - - /* constants */ - -#define Z_NO_FLUSH 0 -#define Z_PARTIAL_FLUSH 1 -#define Z_SYNC_FLUSH 2 -#define Z_FULL_FLUSH 3 -#define Z_FINISH 4 -#define Z_BLOCK 5 -#define Z_TREES 6 -/* Allowed flush values; see deflate() and inflate() below for details */ - -#define Z_OK 0 -#define Z_STREAM_END 1 -#define Z_NEED_DICT 2 -#define Z_ERRNO (-1) -#define Z_STREAM_ERROR (-2) -#define Z_DATA_ERROR (-3) -#define Z_MEM_ERROR (-4) -#define Z_BUF_ERROR (-5) -#define Z_VERSION_ERROR (-6) -/* Return codes for the compression/decompression functions. Negative values - * are errors, positive values are used for special but normal events. - */ - -#define Z_NO_COMPRESSION 0 -#define Z_BEST_SPEED 1 -#define Z_BEST_COMPRESSION 9 -#define Z_DEFAULT_COMPRESSION (-1) -/* compression levels */ - -#define Z_FILTERED 1 -#define Z_HUFFMAN_ONLY 2 -#define Z_RLE 3 -#define Z_FIXED 4 -#define Z_DEFAULT_STRATEGY 0 -/* compression strategy; see deflateInit2() below for details */ - -#define Z_BINARY 0 -#define Z_TEXT 1 -#define Z_ASCII Z_TEXT /* for compatibility with 1.2.2 and earlier */ -#define Z_UNKNOWN 2 -/* Possible values of the data_type field (though see inflate()) */ - -#define Z_DEFLATED 8 -/* The deflate compression method (the only one supported in this version) */ - -#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */ - -#define zlib_version zlibVersion() -/* for compatibility with versions < 1.0.2 */ - - - /* basic functions */ - -ZEXTERN const char * ZEXPORT zlibVersion OF((void)); -/* The application can compare zlibVersion and ZLIB_VERSION for consistency. - If the first character differs, the library code actually used is not - compatible with the zlib.h header file used by the application. This check - is automatically made by deflateInit and inflateInit. - */ - -/* -ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level)); - - Initializes the internal stream state for compression. The fields - zalloc, zfree and opaque must be initialized before by the caller. If - zalloc and zfree are set to Z_NULL, deflateInit updates them to use default - allocation functions. - - The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9: - 1 gives best speed, 9 gives best compression, 0 gives no compression at all - (the input data is simply copied a block at a time). Z_DEFAULT_COMPRESSION - requests a default compromise between speed and compression (currently - equivalent to level 6). - - deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_STREAM_ERROR if level is not a valid compression level, or - Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible - with the version assumed by the caller (ZLIB_VERSION). msg is set to null - if there is no error message. deflateInit does not perform any compression: - this will be done by deflate(). -*/ - - -ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush)); -/* - deflate compresses as much data as possible, and stops when the input - buffer becomes empty or the output buffer becomes full. It may introduce - some output latency (reading input without producing any output) except when - forced to flush. - - The detailed semantics are as follows. deflate performs one or both of the - following actions: - - - Compress more input starting at next_in and update next_in and avail_in - accordingly. If not all input can be processed (because there is not - enough room in the output buffer), next_in and avail_in are updated and - processing will resume at this point for the next call of deflate(). - - - Provide more output starting at next_out and update next_out and avail_out - accordingly. This action is forced if the parameter flush is non zero. - Forcing flush frequently degrades the compression ratio, so this parameter - should be set only when necessary (in interactive applications). Some - output may be provided even if flush is not set. - - Before the call of deflate(), the application should ensure that at least - one of the actions is possible, by providing more input and/or consuming more - output, and updating avail_in or avail_out accordingly; avail_out should - never be zero before the call. The application can consume the compressed - output when it wants, for example when the output buffer is full (avail_out - == 0), or after each call of deflate(). If deflate returns Z_OK and with - zero avail_out, it must be called again after making room in the output - buffer because there might be more output pending. - - Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to - decide how much data to accumulate before producing output, in order to - maximize compression. - - If the parameter flush is set to Z_SYNC_FLUSH, all pending output is - flushed to the output buffer and the output is aligned on a byte boundary, so - that the decompressor can get all input data available so far. (In - particular avail_in is zero after the call if enough output space has been - provided before the call.) Flushing may degrade compression for some - compression algorithms and so it should be used only when necessary. This - completes the current deflate block and follows it with an empty stored block - that is three bits plus filler bits to the next byte, followed by four bytes - (00 00 ff ff). - - If flush is set to Z_PARTIAL_FLUSH, all pending output is flushed to the - output buffer, but the output is not aligned to a byte boundary. All of the - input data so far will be available to the decompressor, as for Z_SYNC_FLUSH. - This completes the current deflate block and follows it with an empty fixed - codes block that is 10 bits long. This assures that enough bytes are output - in order for the decompressor to finish the block before the empty fixed code - block. - - If flush is set to Z_BLOCK, a deflate block is completed and emitted, as - for Z_SYNC_FLUSH, but the output is not aligned on a byte boundary, and up to - seven bits of the current block are held to be written as the next byte after - the next deflate block is completed. In this case, the decompressor may not - be provided enough bits at this point in order to complete decompression of - the data provided so far to the compressor. It may need to wait for the next - block to be emitted. This is for advanced applications that need to control - the emission of deflate blocks. - - If flush is set to Z_FULL_FLUSH, all output is flushed as with - Z_SYNC_FLUSH, and the compression state is reset so that decompression can - restart from this point if previous compressed data has been damaged or if - random access is desired. Using Z_FULL_FLUSH too often can seriously degrade - compression. - - If deflate returns with avail_out == 0, this function must be called again - with the same value of the flush parameter and more output space (updated - avail_out), until the flush is complete (deflate returns with non-zero - avail_out). In the case of a Z_FULL_FLUSH or Z_SYNC_FLUSH, make sure that - avail_out is greater than six to avoid repeated flush markers due to - avail_out == 0 on return. - - If the parameter flush is set to Z_FINISH, pending input is processed, - pending output is flushed and deflate returns with Z_STREAM_END if there was - enough output space; if deflate returns with Z_OK, this function must be - called again with Z_FINISH and more output space (updated avail_out) but no - more input data, until it returns with Z_STREAM_END or an error. After - deflate has returned Z_STREAM_END, the only possible operations on the stream - are deflateReset or deflateEnd. - - Z_FINISH can be used immediately after deflateInit if all the compression - is to be done in a single step. In this case, avail_out must be at least the - value returned by deflateBound (see below). Then deflate is guaranteed to - return Z_STREAM_END. If not enough output space is provided, deflate will - not return Z_STREAM_END, and it must be called again as described above. - - deflate() sets strm->adler to the adler32 checksum of all input read - so far (that is, total_in bytes). - - deflate() may update strm->data_type if it can make a good guess about - the input data type (Z_BINARY or Z_TEXT). In doubt, the data is considered - binary. This field is only for information purposes and does not affect the - compression algorithm in any manner. - - deflate() returns Z_OK if some progress has been made (more input - processed or more output produced), Z_STREAM_END if all input has been - consumed and all output has been produced (only when flush is set to - Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example - if next_in or next_out was Z_NULL), Z_BUF_ERROR if no progress is possible - (for example avail_in or avail_out was zero). Note that Z_BUF_ERROR is not - fatal, and deflate() can be called again with more input and more output - space to continue compressing. -*/ - - -ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm)); -/* - All dynamically allocated data structures for this stream are freed. - This function discards any unprocessed input and does not flush any pending - output. - - deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the - stream state was inconsistent, Z_DATA_ERROR if the stream was freed - prematurely (some input or output was discarded). In the error case, msg - may be set but then points to a static string (which must not be - deallocated). -*/ - - -/* -ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm)); - - Initializes the internal stream state for decompression. The fields - next_in, avail_in, zalloc, zfree and opaque must be initialized before by - the caller. If next_in is not Z_NULL and avail_in is large enough (the - exact value depends on the compression method), inflateInit determines the - compression method from the zlib header and allocates all data structures - accordingly; otherwise the allocation will be deferred to the first call of - inflate. If zalloc and zfree are set to Z_NULL, inflateInit updates them to - use default allocation functions. - - inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_VERSION_ERROR if the zlib library version is incompatible with the - version assumed by the caller, or Z_STREAM_ERROR if the parameters are - invalid, such as a null pointer to the structure. msg is set to null if - there is no error message. inflateInit does not perform any decompression - apart from possibly reading the zlib header if present: actual decompression - will be done by inflate(). (So next_in and avail_in may be modified, but - next_out and avail_out are unused and unchanged.) The current implementation - of inflateInit() does not process any header information -- that is deferred - until inflate() is called. -*/ - - -ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush)); -/* - inflate decompresses as much data as possible, and stops when the input - buffer becomes empty or the output buffer becomes full. It may introduce - some output latency (reading input without producing any output) except when - forced to flush. - - The detailed semantics are as follows. inflate performs one or both of the - following actions: - - - Decompress more input starting at next_in and update next_in and avail_in - accordingly. If not all input can be processed (because there is not - enough room in the output buffer), next_in is updated and processing will - resume at this point for the next call of inflate(). - - - Provide more output starting at next_out and update next_out and avail_out - accordingly. inflate() provides as much output as possible, until there is - no more input data or no more space in the output buffer (see below about - the flush parameter). - - Before the call of inflate(), the application should ensure that at least - one of the actions is possible, by providing more input and/or consuming more - output, and updating the next_* and avail_* values accordingly. The - application can consume the uncompressed output when it wants, for example - when the output buffer is full (avail_out == 0), or after each call of - inflate(). If inflate returns Z_OK and with zero avail_out, it must be - called again after making room in the output buffer because there might be - more output pending. - - The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH, Z_FINISH, - Z_BLOCK, or Z_TREES. Z_SYNC_FLUSH requests that inflate() flush as much - output as possible to the output buffer. Z_BLOCK requests that inflate() - stop if and when it gets to the next deflate block boundary. When decoding - the zlib or gzip format, this will cause inflate() to return immediately - after the header and before the first block. When doing a raw inflate, - inflate() will go ahead and process the first block, and will return when it - gets to the end of that block, or when it runs out of data. - - The Z_BLOCK option assists in appending to or combining deflate streams. - Also to assist in this, on return inflate() will set strm->data_type to the - number of unused bits in the last byte taken from strm->next_in, plus 64 if - inflate() is currently decoding the last block in the deflate stream, plus - 128 if inflate() returned immediately after decoding an end-of-block code or - decoding the complete header up to just before the first byte of the deflate - stream. The end-of-block will not be indicated until all of the uncompressed - data from that block has been written to strm->next_out. The number of - unused bits may in general be greater than seven, except when bit 7 of - data_type is set, in which case the number of unused bits will be less than - eight. data_type is set as noted here every time inflate() returns for all - flush options, and so can be used to determine the amount of currently - consumed input in bits. - - The Z_TREES option behaves as Z_BLOCK does, but it also returns when the - end of each deflate block header is reached, before any actual data in that - block is decoded. This allows the caller to determine the length of the - deflate block header for later use in random access within a deflate block. - 256 is added to the value of strm->data_type when inflate() returns - immediately after reaching the end of the deflate block header. - - inflate() should normally be called until it returns Z_STREAM_END or an - error. However if all decompression is to be performed in a single step (a - single call of inflate), the parameter flush should be set to Z_FINISH. In - this case all pending input is processed and all pending output is flushed; - avail_out must be large enough to hold all of the uncompressed data for the - operation to complete. (The size of the uncompressed data may have been - saved by the compressor for this purpose.) The use of Z_FINISH is not - required to perform an inflation in one step. However it may be used to - inform inflate that a faster approach can be used for the single inflate() - call. Z_FINISH also informs inflate to not maintain a sliding window if the - stream completes, which reduces inflate's memory footprint. If the stream - does not complete, either because not all of the stream is provided or not - enough output space is provided, then a sliding window will be allocated and - inflate() can be called again to continue the operation as if Z_NO_FLUSH had - been used. - - In this implementation, inflate() always flushes as much output as - possible to the output buffer, and always uses the faster approach on the - first call. So the effects of the flush parameter in this implementation are - on the return value of inflate() as noted below, when inflate() returns early - when Z_BLOCK or Z_TREES is used, and when inflate() avoids the allocation of - memory for a sliding window when Z_FINISH is used. - - If a preset dictionary is needed after this call (see inflateSetDictionary - below), inflate sets strm->adler to the Adler-32 checksum of the dictionary - chosen by the compressor and returns Z_NEED_DICT; otherwise it sets - strm->adler to the Adler-32 checksum of all output produced so far (that is, - total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described - below. At the end of the stream, inflate() checks that its computed adler32 - checksum is equal to that saved by the compressor and returns Z_STREAM_END - only if the checksum is correct. - - inflate() can decompress and check either zlib-wrapped or gzip-wrapped - deflate data. The header type is detected automatically, if requested when - initializing with inflateInit2(). Any information contained in the gzip - header is not retained, so applications that need that information should - instead use raw inflate, see inflateInit2() below, or inflateBack() and - perform their own processing of the gzip header and trailer. When processing - gzip-wrapped deflate data, strm->adler32 is set to the CRC-32 of the output - producted so far. The CRC-32 is checked against the gzip trailer. - - inflate() returns Z_OK if some progress has been made (more input processed - or more output produced), Z_STREAM_END if the end of the compressed data has - been reached and all uncompressed output has been produced, Z_NEED_DICT if a - preset dictionary is needed at this point, Z_DATA_ERROR if the input data was - corrupted (input stream not conforming to the zlib format or incorrect check - value), Z_STREAM_ERROR if the stream structure was inconsistent (for example - next_in or next_out was Z_NULL), Z_MEM_ERROR if there was not enough memory, - Z_BUF_ERROR if no progress is possible or if there was not enough room in the - output buffer when Z_FINISH is used. Note that Z_BUF_ERROR is not fatal, and - inflate() can be called again with more input and more output space to - continue decompressing. If Z_DATA_ERROR is returned, the application may - then call inflateSync() to look for a good compression block if a partial - recovery of the data is desired. -*/ - - -ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm)); -/* - All dynamically allocated data structures for this stream are freed. - This function discards any unprocessed input and does not flush any pending - output. - - inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state - was inconsistent. In the error case, msg may be set but then points to a - static string (which must not be deallocated). -*/ - - - /* Advanced functions */ - -/* - The following functions are needed only in some special applications. -*/ - -/* -ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm, - int level, - int method, - int windowBits, - int memLevel, - int strategy)); - - This is another version of deflateInit with more compression options. The - fields next_in, zalloc, zfree and opaque must be initialized before by the - caller. - - The method parameter is the compression method. It must be Z_DEFLATED in - this version of the library. - - The windowBits parameter is the base two logarithm of the window size - (the size of the history buffer). It should be in the range 8..15 for this - version of the library. Larger values of this parameter result in better - compression at the expense of memory usage. The default value is 15 if - deflateInit is used instead. - - windowBits can also be -8..-15 for raw deflate. In this case, -windowBits - determines the window size. deflate() will then generate raw deflate data - with no zlib header or trailer, and will not compute an adler32 check value. - - windowBits can also be greater than 15 for optional gzip encoding. Add - 16 to windowBits to write a simple gzip header and trailer around the - compressed data instead of a zlib wrapper. The gzip header will have no - file name, no extra data, no comment, no modification time (set to zero), no - header crc, and the operating system will be set to 255 (unknown). If a - gzip stream is being written, strm->adler is a crc32 instead of an adler32. - - The memLevel parameter specifies how much memory should be allocated - for the internal compression state. memLevel=1 uses minimum memory but is - slow and reduces compression ratio; memLevel=9 uses maximum memory for - optimal speed. The default value is 8. See zconf.h for total memory usage - as a function of windowBits and memLevel. - - The strategy parameter is used to tune the compression algorithm. Use the - value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a - filter (or predictor), Z_HUFFMAN_ONLY to force Huffman encoding only (no - string match), or Z_RLE to limit match distances to one (run-length - encoding). Filtered data consists mostly of small values with a somewhat - random distribution. In this case, the compression algorithm is tuned to - compress them better. The effect of Z_FILTERED is to force more Huffman - coding and less string matching; it is somewhat intermediate between - Z_DEFAULT_STRATEGY and Z_HUFFMAN_ONLY. Z_RLE is designed to be almost as - fast as Z_HUFFMAN_ONLY, but give better compression for PNG image data. The - strategy parameter only affects the compression ratio but not the - correctness of the compressed output even if it is not set appropriately. - Z_FIXED prevents the use of dynamic Huffman codes, allowing for a simpler - decoder for special applications. - - deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_STREAM_ERROR if any parameter is invalid (such as an invalid - method), or Z_VERSION_ERROR if the zlib library version (zlib_version) is - incompatible with the version assumed by the caller (ZLIB_VERSION). msg is - set to null if there is no error message. deflateInit2 does not perform any - compression: this will be done by deflate(). -*/ - -ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm, - const Bytef *dictionary, - uInt dictLength)); -/* - Initializes the compression dictionary from the given byte sequence - without producing any compressed output. When using the zlib format, this - function must be called immediately after deflateInit, deflateInit2 or - deflateReset, and before any call of deflate. When doing raw deflate, this - function must be called either before any call of deflate, or immediately - after the completion of a deflate block, i.e. after all input has been - consumed and all output has been delivered when using any of the flush - options Z_BLOCK, Z_PARTIAL_FLUSH, Z_SYNC_FLUSH, or Z_FULL_FLUSH. The - compressor and decompressor must use exactly the same dictionary (see - inflateSetDictionary). - - The dictionary should consist of strings (byte sequences) that are likely - to be encountered later in the data to be compressed, with the most commonly - used strings preferably put towards the end of the dictionary. Using a - dictionary is most useful when the data to be compressed is short and can be - predicted with good accuracy; the data can then be compressed better than - with the default empty dictionary. - - Depending on the size of the compression data structures selected by - deflateInit or deflateInit2, a part of the dictionary may in effect be - discarded, for example if the dictionary is larger than the window size - provided in deflateInit or deflateInit2. Thus the strings most likely to be - useful should be put at the end of the dictionary, not at the front. In - addition, the current implementation of deflate will use at most the window - size minus 262 bytes of the provided dictionary. - - Upon return of this function, strm->adler is set to the adler32 value - of the dictionary; the decompressor may later use this value to determine - which dictionary has been used by the compressor. (The adler32 value - applies to the whole dictionary even if only a subset of the dictionary is - actually used by the compressor.) If a raw deflate was requested, then the - adler32 value is not computed and strm->adler is not set. - - deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a - parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is - inconsistent (for example if deflate has already been called for this stream - or if not at a block boundary for raw deflate). deflateSetDictionary does - not perform any compression: this will be done by deflate(). -*/ - -ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest, - z_streamp source)); -/* - Sets the destination stream as a complete copy of the source stream. - - This function can be useful when several compression strategies will be - tried, for example when there are several ways of pre-processing the input - data with a filter. The streams that will be discarded should then be freed - by calling deflateEnd. Note that deflateCopy duplicates the internal - compression state which can be quite large, so this strategy is slow and can - consume lots of memory. - - deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_STREAM_ERROR if the source stream state was inconsistent - (such as zalloc being Z_NULL). msg is left unchanged in both source and - destination. -*/ - -ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm)); -/* - This function is equivalent to deflateEnd followed by deflateInit, - but does not free and reallocate all the internal compression state. The - stream will keep the same compression level and any other attributes that - may have been set by deflateInit2. - - deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent (such as zalloc or state being Z_NULL). -*/ - -ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm, - int level, - int strategy)); -/* - Dynamically update the compression level and compression strategy. The - interpretation of level and strategy is as in deflateInit2. This can be - used to switch between compression and straight copy of the input data, or - to switch to a different kind of input data requiring a different strategy. - If the compression level is changed, the input available so far is - compressed with the old level (and may be flushed); the new level will take - effect only at the next call of deflate(). - - Before the call of deflateParams, the stream state must be set as for - a call of deflate(), since the currently available input may have to be - compressed and flushed. In particular, strm->avail_out must be non-zero. - - deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source - stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR if - strm->avail_out was zero. -*/ - -ZEXTERN int ZEXPORT deflateTune OF((z_streamp strm, - int good_length, - int max_lazy, - int nice_length, - int max_chain)); -/* - Fine tune deflate's internal compression parameters. This should only be - used by someone who understands the algorithm used by zlib's deflate for - searching for the best matching string, and even then only by the most - fanatic optimizer trying to squeeze out the last compressed bit for their - specific input data. Read the deflate.c source code for the meaning of the - max_lazy, good_length, nice_length, and max_chain parameters. - - deflateTune() can be called after deflateInit() or deflateInit2(), and - returns Z_OK on success, or Z_STREAM_ERROR for an invalid deflate stream. - */ - -ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm, - uLong sourceLen)); -/* - deflateBound() returns an upper bound on the compressed size after - deflation of sourceLen bytes. It must be called after deflateInit() or - deflateInit2(), and after deflateSetHeader(), if used. This would be used - to allocate an output buffer for deflation in a single pass, and so would be - called before deflate(). If that first deflate() call is provided the - sourceLen input bytes, an output buffer allocated to the size returned by - deflateBound(), and the flush value Z_FINISH, then deflate() is guaranteed - to return Z_STREAM_END. Note that it is possible for the compressed size to - be larger than the value returned by deflateBound() if flush options other - than Z_FINISH or Z_NO_FLUSH are used. -*/ - -ZEXTERN int ZEXPORT deflatePending OF((z_streamp strm, - unsigned *pending, - int *bits)); -/* - deflatePending() returns the number of bytes and bits of output that have - been generated, but not yet provided in the available output. The bytes not - provided would be due to the available output space having being consumed. - The number of bits of output not provided are between 0 and 7, where they - await more bits to join them in order to fill out a full byte. If pending - or bits are Z_NULL, then those values are not set. - - deflatePending returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent. - */ - -ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm, - int bits, - int value)); -/* - deflatePrime() inserts bits in the deflate output stream. The intent - is that this function is used to start off the deflate output with the bits - leftover from a previous deflate stream when appending to it. As such, this - function can only be used for raw deflate, and must be used before the first - deflate() call after a deflateInit2() or deflateReset(). bits must be less - than or equal to 16, and that many of the least significant bits of value - will be inserted in the output. - - deflatePrime returns Z_OK if success, Z_BUF_ERROR if there was not enough - room in the internal buffer to insert the bits, or Z_STREAM_ERROR if the - source stream state was inconsistent. -*/ - -ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm, - gz_headerp head)); -/* - deflateSetHeader() provides gzip header information for when a gzip - stream is requested by deflateInit2(). deflateSetHeader() may be called - after deflateInit2() or deflateReset() and before the first call of - deflate(). The text, time, os, extra field, name, and comment information - in the provided gz_header structure are written to the gzip header (xflag is - ignored -- the extra flags are set according to the compression level). The - caller must assure that, if not Z_NULL, name and comment are terminated with - a zero byte, and that if extra is not Z_NULL, that extra_len bytes are - available there. If hcrc is true, a gzip header crc is included. Note that - the current versions of the command-line version of gzip (up through version - 1.3.x) do not support header crc's, and will report that it is a "multi-part - gzip file" and give up. - - If deflateSetHeader is not used, the default gzip header has text false, - the time set to zero, and os set to 255, with no extra, name, or comment - fields. The gzip header is returned to the default state by deflateReset(). - - deflateSetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent. -*/ - -/* -ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm, - int windowBits)); - - This is another version of inflateInit with an extra parameter. The - fields next_in, avail_in, zalloc, zfree and opaque must be initialized - before by the caller. - - The windowBits parameter is the base two logarithm of the maximum window - size (the size of the history buffer). It should be in the range 8..15 for - this version of the library. The default value is 15 if inflateInit is used - instead. windowBits must be greater than or equal to the windowBits value - provided to deflateInit2() while compressing, or it must be equal to 15 if - deflateInit2() was not used. If a compressed stream with a larger window - size is given as input, inflate() will return with the error code - Z_DATA_ERROR instead of trying to allocate a larger window. - - windowBits can also be zero to request that inflate use the window size in - the zlib header of the compressed stream. - - windowBits can also be -8..-15 for raw inflate. In this case, -windowBits - determines the window size. inflate() will then process raw deflate data, - not looking for a zlib or gzip header, not generating a check value, and not - looking for any check values for comparison at the end of the stream. This - is for use with other formats that use the deflate compressed data format - such as zip. Those formats provide their own check values. If a custom - format is developed using the raw deflate format for compressed data, it is - recommended that a check value such as an adler32 or a crc32 be applied to - the uncompressed data as is done in the zlib, gzip, and zip formats. For - most applications, the zlib format should be used as is. Note that comments - above on the use in deflateInit2() applies to the magnitude of windowBits. - - windowBits can also be greater than 15 for optional gzip decoding. Add - 32 to windowBits to enable zlib and gzip decoding with automatic header - detection, or add 16 to decode only the gzip format (the zlib format will - return a Z_DATA_ERROR). If a gzip stream is being decoded, strm->adler is a - crc32 instead of an adler32. - - inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_VERSION_ERROR if the zlib library version is incompatible with the - version assumed by the caller, or Z_STREAM_ERROR if the parameters are - invalid, such as a null pointer to the structure. msg is set to null if - there is no error message. inflateInit2 does not perform any decompression - apart from possibly reading the zlib header if present: actual decompression - will be done by inflate(). (So next_in and avail_in may be modified, but - next_out and avail_out are unused and unchanged.) The current implementation - of inflateInit2() does not process any header information -- that is - deferred until inflate() is called. -*/ - -ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm, - const Bytef *dictionary, - uInt dictLength)); -/* - Initializes the decompression dictionary from the given uncompressed byte - sequence. This function must be called immediately after a call of inflate, - if that call returned Z_NEED_DICT. The dictionary chosen by the compressor - can be determined from the adler32 value returned by that call of inflate. - The compressor and decompressor must use exactly the same dictionary (see - deflateSetDictionary). For raw inflate, this function can be called at any - time to set the dictionary. If the provided dictionary is smaller than the - window and there is already data in the window, then the provided dictionary - will amend what's there. The application must insure that the dictionary - that was used for compression is provided. - - inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a - parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is - inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the - expected one (incorrect adler32 value). inflateSetDictionary does not - perform any decompression: this will be done by subsequent calls of - inflate(). -*/ - -ZEXTERN int ZEXPORT inflateGetDictionary OF((z_streamp strm, - Bytef *dictionary, - uInt *dictLength)); -/* - Returns the sliding dictionary being maintained by inflate. dictLength is - set to the number of bytes in the dictionary, and that many bytes are copied - to dictionary. dictionary must have enough space, where 32768 bytes is - always enough. If inflateGetDictionary() is called with dictionary equal to - Z_NULL, then only the dictionary length is returned, and nothing is copied. - Similary, if dictLength is Z_NULL, then it is not set. - - inflateGetDictionary returns Z_OK on success, or Z_STREAM_ERROR if the - stream state is inconsistent. -*/ - -ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm)); -/* - Skips invalid compressed data until a possible full flush point (see above - for the description of deflate with Z_FULL_FLUSH) can be found, or until all - available input is skipped. No output is provided. - - inflateSync searches for a 00 00 FF FF pattern in the compressed data. - All full flush points have this pattern, but not all occurrences of this - pattern are full flush points. - - inflateSync returns Z_OK if a possible full flush point has been found, - Z_BUF_ERROR if no more input was provided, Z_DATA_ERROR if no flush point - has been found, or Z_STREAM_ERROR if the stream structure was inconsistent. - In the success case, the application may save the current current value of - total_in which indicates where valid compressed data was found. In the - error case, the application may repeatedly call inflateSync, providing more - input each time, until success or end of the input data. -*/ - -ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest, - z_streamp source)); -/* - Sets the destination stream as a complete copy of the source stream. - - This function can be useful when randomly accessing a large stream. The - first pass through the stream can periodically record the inflate state, - allowing restarting inflate at those points when randomly accessing the - stream. - - inflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_STREAM_ERROR if the source stream state was inconsistent - (such as zalloc being Z_NULL). msg is left unchanged in both source and - destination. -*/ - -ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm)); -/* - This function is equivalent to inflateEnd followed by inflateInit, - but does not free and reallocate all the internal decompression state. The - stream will keep attributes that may have been set by inflateInit2. - - inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent (such as zalloc or state being Z_NULL). -*/ - -ZEXTERN int ZEXPORT inflateReset2 OF((z_streamp strm, - int windowBits)); -/* - This function is the same as inflateReset, but it also permits changing - the wrap and window size requests. The windowBits parameter is interpreted - the same as it is for inflateInit2. - - inflateReset2 returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent (such as zalloc or state being Z_NULL), or if - the windowBits parameter is invalid. -*/ - -ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm, - int bits, - int value)); -/* - This function inserts bits in the inflate input stream. The intent is - that this function is used to start inflating at a bit position in the - middle of a byte. The provided bits will be used before any bytes are used - from next_in. This function should only be used with raw inflate, and - should be used before the first inflate() call after inflateInit2() or - inflateReset(). bits must be less than or equal to 16, and that many of the - least significant bits of value will be inserted in the input. - - If bits is negative, then the input stream bit buffer is emptied. Then - inflatePrime() can be called again to put bits in the buffer. This is used - to clear out bits leftover after feeding inflate a block description prior - to feeding inflate codes. - - inflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent. -*/ - -ZEXTERN long ZEXPORT inflateMark OF((z_streamp strm)); -/* - This function returns two values, one in the lower 16 bits of the return - value, and the other in the remaining upper bits, obtained by shifting the - return value down 16 bits. If the upper value is -1 and the lower value is - zero, then inflate() is currently decoding information outside of a block. - If the upper value is -1 and the lower value is non-zero, then inflate is in - the middle of a stored block, with the lower value equaling the number of - bytes from the input remaining to copy. If the upper value is not -1, then - it is the number of bits back from the current bit position in the input of - the code (literal or length/distance pair) currently being processed. In - that case the lower value is the number of bytes already emitted for that - code. - - A code is being processed if inflate is waiting for more input to complete - decoding of the code, or if it has completed decoding but is waiting for - more output space to write the literal or match data. - - inflateMark() is used to mark locations in the input data for random - access, which may be at bit positions, and to note those cases where the - output of a code may span boundaries of random access blocks. The current - location in the input stream can be determined from avail_in and data_type - as noted in the description for the Z_BLOCK flush parameter for inflate. - - inflateMark returns the value noted above or -1 << 16 if the provided - source stream state was inconsistent. -*/ - -ZEXTERN int ZEXPORT inflateGetHeader OF((z_streamp strm, - gz_headerp head)); -/* - inflateGetHeader() requests that gzip header information be stored in the - provided gz_header structure. inflateGetHeader() may be called after - inflateInit2() or inflateReset(), and before the first call of inflate(). - As inflate() processes the gzip stream, head->done is zero until the header - is completed, at which time head->done is set to one. If a zlib stream is - being decoded, then head->done is set to -1 to indicate that there will be - no gzip header information forthcoming. Note that Z_BLOCK or Z_TREES can be - used to force inflate() to return immediately after header processing is - complete and before any actual data is decompressed. - - The text, time, xflags, and os fields are filled in with the gzip header - contents. hcrc is set to true if there is a header CRC. (The header CRC - was valid if done is set to one.) If extra is not Z_NULL, then extra_max - contains the maximum number of bytes to write to extra. Once done is true, - extra_len contains the actual extra field length, and extra contains the - extra field, or that field truncated if extra_max is less than extra_len. - If name is not Z_NULL, then up to name_max characters are written there, - terminated with a zero unless the length is greater than name_max. If - comment is not Z_NULL, then up to comm_max characters are written there, - terminated with a zero unless the length is greater than comm_max. When any - of extra, name, or comment are not Z_NULL and the respective field is not - present in the header, then that field is set to Z_NULL to signal its - absence. This allows the use of deflateSetHeader() with the returned - structure to duplicate the header. However if those fields are set to - allocated memory, then the application will need to save those pointers - elsewhere so that they can be eventually freed. - - If inflateGetHeader is not used, then the header information is simply - discarded. The header is always checked for validity, including the header - CRC if present. inflateReset() will reset the process to discard the header - information. The application would need to call inflateGetHeader() again to - retrieve the header from the next gzip stream. - - inflateGetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent. -*/ - -/* -ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits, - unsigned char FAR *window)); - - Initialize the internal stream state for decompression using inflateBack() - calls. The fields zalloc, zfree and opaque in strm must be initialized - before the call. If zalloc and zfree are Z_NULL, then the default library- - derived memory allocation routines are used. windowBits is the base two - logarithm of the window size, in the range 8..15. window is a caller - supplied buffer of that size. Except for special applications where it is - assured that deflate was used with small window sizes, windowBits must be 15 - and a 32K byte window must be supplied to be able to decompress general - deflate streams. - - See inflateBack() for the usage of these routines. - - inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of - the parameters are invalid, Z_MEM_ERROR if the internal state could not be - allocated, or Z_VERSION_ERROR if the version of the library does not match - the version of the header file. -*/ - -typedef unsigned (*in_func) OF((void FAR *, - z_const unsigned char FAR * FAR *)); -typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned)); - -ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm, - in_func in, void FAR *in_desc, - out_func out, void FAR *out_desc)); -/* - inflateBack() does a raw inflate with a single call using a call-back - interface for input and output. This is potentially more efficient than - inflate() for file i/o applications, in that it avoids copying between the - output and the sliding window by simply making the window itself the output - buffer. inflate() can be faster on modern CPUs when used with large - buffers. inflateBack() trusts the application to not change the output - buffer passed by the output function, at least until inflateBack() returns. - - inflateBackInit() must be called first to allocate the internal state - and to initialize the state with the user-provided window buffer. - inflateBack() may then be used multiple times to inflate a complete, raw - deflate stream with each call. inflateBackEnd() is then called to free the - allocated state. - - A raw deflate stream is one with no zlib or gzip header or trailer. - This routine would normally be used in a utility that reads zip or gzip - files and writes out uncompressed files. The utility would decode the - header and process the trailer on its own, hence this routine expects only - the raw deflate stream to decompress. This is different from the normal - behavior of inflate(), which expects either a zlib or gzip header and - trailer around the deflate stream. - - inflateBack() uses two subroutines supplied by the caller that are then - called by inflateBack() for input and output. inflateBack() calls those - routines until it reads a complete deflate stream and writes out all of the - uncompressed data, or until it encounters an error. The function's - parameters and return types are defined above in the in_func and out_func - typedefs. inflateBack() will call in(in_desc, &buf) which should return the - number of bytes of provided input, and a pointer to that input in buf. If - there is no input available, in() must return zero--buf is ignored in that - case--and inflateBack() will return a buffer error. inflateBack() will call - out(out_desc, buf, len) to write the uncompressed data buf[0..len-1]. out() - should return zero on success, or non-zero on failure. If out() returns - non-zero, inflateBack() will return with an error. Neither in() nor out() - are permitted to change the contents of the window provided to - inflateBackInit(), which is also the buffer that out() uses to write from. - The length written by out() will be at most the window size. Any non-zero - amount of input may be provided by in(). - - For convenience, inflateBack() can be provided input on the first call by - setting strm->next_in and strm->avail_in. If that input is exhausted, then - in() will be called. Therefore strm->next_in must be initialized before - calling inflateBack(). If strm->next_in is Z_NULL, then in() will be called - immediately for input. If strm->next_in is not Z_NULL, then strm->avail_in - must also be initialized, and then if strm->avail_in is not zero, input will - initially be taken from strm->next_in[0 .. strm->avail_in - 1]. - - The in_desc and out_desc parameters of inflateBack() is passed as the - first parameter of in() and out() respectively when they are called. These - descriptors can be optionally used to pass any information that the caller- - supplied in() and out() functions need to do their job. - - On return, inflateBack() will set strm->next_in and strm->avail_in to - pass back any unused input that was provided by the last in() call. The - return values of inflateBack() can be Z_STREAM_END on success, Z_BUF_ERROR - if in() or out() returned an error, Z_DATA_ERROR if there was a format error - in the deflate stream (in which case strm->msg is set to indicate the nature - of the error), or Z_STREAM_ERROR if the stream was not properly initialized. - In the case of Z_BUF_ERROR, an input or output error can be distinguished - using strm->next_in which will be Z_NULL only if in() returned an error. If - strm->next_in is not Z_NULL, then the Z_BUF_ERROR was due to out() returning - non-zero. (in() will always be called before out(), so strm->next_in is - assured to be defined if out() returns non-zero.) Note that inflateBack() - cannot return Z_OK. -*/ - -ZEXTERN int ZEXPORT inflateBackEnd OF((z_streamp strm)); -/* - All memory allocated by inflateBackInit() is freed. - - inflateBackEnd() returns Z_OK on success, or Z_STREAM_ERROR if the stream - state was inconsistent. -*/ - -ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void)); -/* Return flags indicating compile-time options. - - Type sizes, two bits each, 00 = 16 bits, 01 = 32, 10 = 64, 11 = other: - 1.0: size of uInt - 3.2: size of uLong - 5.4: size of voidpf (pointer) - 7.6: size of z_off_t - - Compiler, assembler, and debug options: - 8: DEBUG - 9: ASMV or ASMINF -- use ASM code - 10: ZLIB_WINAPI -- exported functions use the WINAPI calling convention - 11: 0 (reserved) - - One-time table building (smaller code, but not thread-safe if true): - 12: BUILDFIXED -- build static block decoding tables when needed - 13: DYNAMIC_CRC_TABLE -- build CRC calculation tables when needed - 14,15: 0 (reserved) - - Library content (indicates missing functionality): - 16: NO_GZCOMPRESS -- gz* functions cannot compress (to avoid linking - deflate code when not needed) - 17: NO_GZIP -- deflate can't write gzip streams, and inflate can't detect - and decode gzip streams (to avoid linking crc code) - 18-19: 0 (reserved) - - Operation variations (changes in library functionality): - 20: PKZIP_BUG_WORKAROUND -- slightly more permissive inflate - 21: FASTEST -- deflate algorithm with only one, lowest compression level - 22,23: 0 (reserved) - - The sprintf variant used by gzprintf (zero is best): - 24: 0 = vs*, 1 = s* -- 1 means limited to 20 arguments after the format - 25: 0 = *nprintf, 1 = *printf -- 1 means gzprintf() not secure! - 26: 0 = returns value, 1 = void -- 1 means inferred string length returned - - Remainder: - 27-31: 0 (reserved) - */ - -#ifndef Z_SOLO - - /* utility functions */ - -/* - The following utility functions are implemented on top of the basic - stream-oriented functions. To simplify the interface, some default options - are assumed (compression level and memory usage, standard memory allocation - functions). The source code of these utility functions can be modified if - you need special options. -*/ - -ZEXTERN int ZEXPORT compress OF((Bytef *dest, uLongf *destLen, - const Bytef *source, uLong sourceLen)); -/* - Compresses the source buffer into the destination buffer. sourceLen is - the byte length of the source buffer. Upon entry, destLen is the total size - of the destination buffer, which must be at least the value returned by - compressBound(sourceLen). Upon exit, destLen is the actual size of the - compressed buffer. - - compress returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_BUF_ERROR if there was not enough room in the output - buffer. -*/ - -ZEXTERN int ZEXPORT compress2 OF((Bytef *dest, uLongf *destLen, - const Bytef *source, uLong sourceLen, - int level)); -/* - Compresses the source buffer into the destination buffer. The level - parameter has the same meaning as in deflateInit. sourceLen is the byte - length of the source buffer. Upon entry, destLen is the total size of the - destination buffer, which must be at least the value returned by - compressBound(sourceLen). Upon exit, destLen is the actual size of the - compressed buffer. - - compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_BUF_ERROR if there was not enough room in the output buffer, - Z_STREAM_ERROR if the level parameter is invalid. -*/ - -ZEXTERN uLong ZEXPORT compressBound OF((uLong sourceLen)); -/* - compressBound() returns an upper bound on the compressed size after - compress() or compress2() on sourceLen bytes. It would be used before a - compress() or compress2() call to allocate the destination buffer. -*/ - -ZEXTERN int ZEXPORT uncompress OF((Bytef *dest, uLongf *destLen, - const Bytef *source, uLong sourceLen)); -/* - Decompresses the source buffer into the destination buffer. sourceLen is - the byte length of the source buffer. Upon entry, destLen is the total size - of the destination buffer, which must be large enough to hold the entire - uncompressed data. (The size of the uncompressed data must have been saved - previously by the compressor and transmitted to the decompressor by some - mechanism outside the scope of this compression library.) Upon exit, destLen - is the actual size of the uncompressed buffer. - - uncompress returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_BUF_ERROR if there was not enough room in the output - buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete. In - the case where there is not enough room, uncompress() will fill the output - buffer with the uncompressed data up to that point. -*/ - - /* gzip file access functions */ - -/* - This library supports reading and writing files in gzip (.gz) format with - an interface similar to that of stdio, using the functions that start with - "gz". The gzip format is different from the zlib format. gzip is a gzip - wrapper, documented in RFC 1952, wrapped around a deflate stream. -*/ - -typedef struct gzFile_s *gzFile; /* semi-opaque gzip file descriptor */ - -/* -ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode)); - - Opens a gzip (.gz) file for reading or writing. The mode parameter is as - in fopen ("rb" or "wb") but can also include a compression level ("wb9") or - a strategy: 'f' for filtered data as in "wb6f", 'h' for Huffman-only - compression as in "wb1h", 'R' for run-length encoding as in "wb1R", or 'F' - for fixed code compression as in "wb9F". (See the description of - deflateInit2 for more information about the strategy parameter.) 'T' will - request transparent writing or appending with no compression and not using - the gzip format. - - "a" can be used instead of "w" to request that the gzip stream that will - be written be appended to the file. "+" will result in an error, since - reading and writing to the same gzip file is not supported. The addition of - "x" when writing will create the file exclusively, which fails if the file - already exists. On systems that support it, the addition of "e" when - reading or writing will set the flag to close the file on an execve() call. - - These functions, as well as gzip, will read and decode a sequence of gzip - streams in a file. The append function of gzopen() can be used to create - such a file. (Also see gzflush() for another way to do this.) When - appending, gzopen does not test whether the file begins with a gzip stream, - nor does it look for the end of the gzip streams to begin appending. gzopen - will simply append a gzip stream to the existing file. - - gzopen can be used to read a file which is not in gzip format; in this - case gzread will directly read from the file without decompression. When - reading, this will be detected automatically by looking for the magic two- - byte gzip header. - - gzopen returns NULL if the file could not be opened, if there was - insufficient memory to allocate the gzFile state, or if an invalid mode was - specified (an 'r', 'w', or 'a' was not provided, or '+' was provided). - errno can be checked to determine if the reason gzopen failed was that the - file could not be opened. -*/ - -ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode)); -/* - gzdopen associates a gzFile with the file descriptor fd. File descriptors - are obtained from calls like open, dup, creat, pipe or fileno (if the file - has been previously opened with fopen). The mode parameter is as in gzopen. - - The next call of gzclose on the returned gzFile will also close the file - descriptor fd, just like fclose(fdopen(fd, mode)) closes the file descriptor - fd. If you want to keep fd open, use fd = dup(fd_keep); gz = gzdopen(fd, - mode);. The duplicated descriptor should be saved to avoid a leak, since - gzdopen does not close fd if it fails. If you are using fileno() to get the - file descriptor from a FILE *, then you will have to use dup() to avoid - double-close()ing the file descriptor. Both gzclose() and fclose() will - close the associated file descriptor, so they need to have different file - descriptors. - - gzdopen returns NULL if there was insufficient memory to allocate the - gzFile state, if an invalid mode was specified (an 'r', 'w', or 'a' was not - provided, or '+' was provided), or if fd is -1. The file descriptor is not - used until the next gz* read, write, seek, or close operation, so gzdopen - will not detect if fd is invalid (unless fd is -1). -*/ - -ZEXTERN int ZEXPORT gzbuffer OF((gzFile file, unsigned size)); -/* - Set the internal buffer size used by this library's functions. The - default buffer size is 8192 bytes. This function must be called after - gzopen() or gzdopen(), and before any other calls that read or write the - file. The buffer memory allocation is always deferred to the first read or - write. Two buffers are allocated, either both of the specified size when - writing, or one of the specified size and the other twice that size when - reading. A larger buffer size of, for example, 64K or 128K bytes will - noticeably increase the speed of decompression (reading). - - The new buffer size also affects the maximum length for gzprintf(). - - gzbuffer() returns 0 on success, or -1 on failure, such as being called - too late. -*/ - -ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy)); -/* - Dynamically update the compression level or strategy. See the description - of deflateInit2 for the meaning of these parameters. - - gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not - opened for writing. -*/ - -ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len)); -/* - Reads the given number of uncompressed bytes from the compressed file. If - the input file is not in gzip format, gzread copies the given number of - bytes into the buffer directly from the file. - - After reaching the end of a gzip stream in the input, gzread will continue - to read, looking for another gzip stream. Any number of gzip streams may be - concatenated in the input file, and will all be decompressed by gzread(). - If something other than a gzip stream is encountered after a gzip stream, - that remaining trailing garbage is ignored (and no error is returned). - - gzread can be used to read a gzip file that is being concurrently written. - Upon reaching the end of the input, gzread will return with the available - data. If the error code returned by gzerror is Z_OK or Z_BUF_ERROR, then - gzclearerr can be used to clear the end of file indicator in order to permit - gzread to be tried again. Z_OK indicates that a gzip stream was completed - on the last gzread. Z_BUF_ERROR indicates that the input file ended in the - middle of a gzip stream. Note that gzread does not return -1 in the event - of an incomplete gzip stream. This error is deferred until gzclose(), which - will return Z_BUF_ERROR if the last gzread ended in the middle of a gzip - stream. Alternatively, gzerror can be used before gzclose to detect this - case. - - gzread returns the number of uncompressed bytes actually read, less than - len for end of file, or -1 for error. -*/ - -ZEXTERN int ZEXPORT gzwrite OF((gzFile file, - voidpc buf, unsigned len)); -/* - Writes the given number of uncompressed bytes into the compressed file. - gzwrite returns the number of uncompressed bytes written or 0 in case of - error. -*/ - -ZEXTERN int ZEXPORTVA gzprintf Z_ARG((gzFile file, const char *format, ...)); -/* - Converts, formats, and writes the arguments to the compressed file under - control of the format string, as in fprintf. gzprintf returns the number of - uncompressed bytes actually written, or 0 in case of error. The number of - uncompressed bytes written is limited to 8191, or one less than the buffer - size given to gzbuffer(). The caller should assure that this limit is not - exceeded. If it is exceeded, then gzprintf() will return an error (0) with - nothing written. In this case, there may also be a buffer overflow with - unpredictable consequences, which is possible only if zlib was compiled with - the insecure functions sprintf() or vsprintf() because the secure snprintf() - or vsnprintf() functions were not available. This can be determined using - zlibCompileFlags(). -*/ - -ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s)); -/* - Writes the given null-terminated string to the compressed file, excluding - the terminating null character. - - gzputs returns the number of characters written, or -1 in case of error. -*/ - -ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len)); -/* - Reads bytes from the compressed file until len-1 characters are read, or a - newline character is read and transferred to buf, or an end-of-file - condition is encountered. If any characters are read or if len == 1, the - string is terminated with a null character. If no characters are read due - to an end-of-file or len < 1, then the buffer is left untouched. - - gzgets returns buf which is a null-terminated string, or it returns NULL - for end-of-file or in case of error. If there was an error, the contents at - buf are indeterminate. -*/ - -ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c)); -/* - Writes c, converted to an unsigned char, into the compressed file. gzputc - returns the value that was written, or -1 in case of error. -*/ - -ZEXTERN int ZEXPORT gzgetc OF((gzFile file)); -/* - Reads one byte from the compressed file. gzgetc returns this byte or -1 - in case of end of file or error. This is implemented as a macro for speed. - As such, it does not do all of the checking the other functions do. I.e. - it does not check to see if file is NULL, nor whether the structure file - points to has been clobbered or not. -*/ - -ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file)); -/* - Push one character back onto the stream to be read as the first character - on the next read. At least one character of push-back is allowed. - gzungetc() returns the character pushed, or -1 on failure. gzungetc() will - fail if c is -1, and may fail if a character has been pushed but not read - yet. If gzungetc is used immediately after gzopen or gzdopen, at least the - output buffer size of pushed characters is allowed. (See gzbuffer above.) - The pushed character will be discarded if the stream is repositioned with - gzseek() or gzrewind(). -*/ - -ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush)); -/* - Flushes all pending output into the compressed file. The parameter flush - is as in the deflate() function. The return value is the zlib error number - (see function gzerror below). gzflush is only permitted when writing. - - If the flush parameter is Z_FINISH, the remaining data is written and the - gzip stream is completed in the output. If gzwrite() is called again, a new - gzip stream will be started in the output. gzread() is able to read such - concatented gzip streams. - - gzflush should be called only when strictly necessary because it will - degrade compression if called too often. -*/ - -/* -ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file, - z_off_t offset, int whence)); - - Sets the starting position for the next gzread or gzwrite on the given - compressed file. The offset represents a number of bytes in the - uncompressed data stream. The whence parameter is defined as in lseek(2); - the value SEEK_END is not supported. - - If the file is opened for reading, this function is emulated but can be - extremely slow. If the file is opened for writing, only forward seeks are - supported; gzseek then compresses a sequence of zeroes up to the new - starting position. - - gzseek returns the resulting offset location as measured in bytes from - the beginning of the uncompressed stream, or -1 in case of error, in - particular if the file is opened for writing and the new starting position - would be before the current position. -*/ - -ZEXTERN int ZEXPORT gzrewind OF((gzFile file)); -/* - Rewinds the given file. This function is supported only for reading. - - gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET) -*/ - -/* -ZEXTERN z_off_t ZEXPORT gztell OF((gzFile file)); - - Returns the starting position for the next gzread or gzwrite on the given - compressed file. This position represents a number of bytes in the - uncompressed data stream, and is zero when starting, even if appending or - reading a gzip stream from the middle of a file using gzdopen(). - - gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR) -*/ - -/* -ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile file)); - - Returns the current offset in the file being read or written. This offset - includes the count of bytes that precede the gzip stream, for example when - appending or when using gzdopen() for reading. When reading, the offset - does not include as yet unused buffered input. This information can be used - for a progress indicator. On error, gzoffset() returns -1. -*/ - -ZEXTERN int ZEXPORT gzeof OF((gzFile file)); -/* - Returns true (1) if the end-of-file indicator has been set while reading, - false (0) otherwise. Note that the end-of-file indicator is set only if the - read tried to go past the end of the input, but came up short. Therefore, - just like feof(), gzeof() may return false even if there is no more data to - read, in the event that the last read request was for the exact number of - bytes remaining in the input file. This will happen if the input file size - is an exact multiple of the buffer size. - - If gzeof() returns true, then the read functions will return no more data, - unless the end-of-file indicator is reset by gzclearerr() and the input file - has grown since the previous end of file was detected. -*/ - -ZEXTERN int ZEXPORT gzdirect OF((gzFile file)); -/* - Returns true (1) if file is being copied directly while reading, or false - (0) if file is a gzip stream being decompressed. - - If the input file is empty, gzdirect() will return true, since the input - does not contain a gzip stream. - - If gzdirect() is used immediately after gzopen() or gzdopen() it will - cause buffers to be allocated to allow reading the file to determine if it - is a gzip file. Therefore if gzbuffer() is used, it should be called before - gzdirect(). - - When writing, gzdirect() returns true (1) if transparent writing was - requested ("wT" for the gzopen() mode), or false (0) otherwise. (Note: - gzdirect() is not needed when writing. Transparent writing must be - explicitly requested, so the application already knows the answer. When - linking statically, using gzdirect() will include all of the zlib code for - gzip file reading and decompression, which may not be desired.) -*/ - -ZEXTERN int ZEXPORT gzclose OF((gzFile file)); -/* - Flushes all pending output if necessary, closes the compressed file and - deallocates the (de)compression state. Note that once file is closed, you - cannot call gzerror with file, since its structures have been deallocated. - gzclose must not be called more than once on the same file, just as free - must not be called more than once on the same allocation. - - gzclose will return Z_STREAM_ERROR if file is not valid, Z_ERRNO on a - file operation error, Z_MEM_ERROR if out of memory, Z_BUF_ERROR if the - last read ended in the middle of a gzip stream, or Z_OK on success. -*/ - -ZEXTERN int ZEXPORT gzclose_r OF((gzFile file)); -ZEXTERN int ZEXPORT gzclose_w OF((gzFile file)); -/* - Same as gzclose(), but gzclose_r() is only for use when reading, and - gzclose_w() is only for use when writing or appending. The advantage to - using these instead of gzclose() is that they avoid linking in zlib - compression or decompression code that is not used when only reading or only - writing respectively. If gzclose() is used, then both compression and - decompression code will be included the application when linking to a static - zlib library. -*/ - -ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum)); -/* - Returns the error message for the last error which occurred on the given - compressed file. errnum is set to zlib error number. If an error occurred - in the file system and not in the compression library, errnum is set to - Z_ERRNO and the application may consult errno to get the exact error code. - - The application must not modify the returned string. Future calls to - this function may invalidate the previously returned string. If file is - closed, then the string previously returned by gzerror will no longer be - available. - - gzerror() should be used to distinguish errors from end-of-file for those - functions above that do not distinguish those cases in their return values. -*/ - -ZEXTERN void ZEXPORT gzclearerr OF((gzFile file)); -/* - Clears the error and end-of-file flags for file. This is analogous to the - clearerr() function in stdio. This is useful for continuing to read a gzip - file that is being written concurrently. -*/ - -#endif /* !Z_SOLO */ - - /* checksum functions */ - -/* - These functions are not related to compression but are exported - anyway because they might be useful in applications using the compression - library. -*/ - -ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len)); -/* - Update a running Adler-32 checksum with the bytes buf[0..len-1] and - return the updated checksum. If buf is Z_NULL, this function returns the - required initial value for the checksum. - - An Adler-32 checksum is almost as reliable as a CRC32 but can be computed - much faster. - - Usage example: - - uLong adler = adler32(0L, Z_NULL, 0); - - while (read_buffer(buffer, length) != EOF) { - adler = adler32(adler, buffer, length); - } - if (adler != original_adler) error(); -*/ - -/* -ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2, - z_off_t len2)); - - Combine two Adler-32 checksums into one. For two sequences of bytes, seq1 - and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for - each, adler1 and adler2. adler32_combine() returns the Adler-32 checksum of - seq1 and seq2 concatenated, requiring only adler1, adler2, and len2. Note - that the z_off_t type (like off_t) is a signed integer. If len2 is - negative, the result has no meaning or utility. -*/ - -ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len)); -/* - Update a running CRC-32 with the bytes buf[0..len-1] and return the - updated CRC-32. If buf is Z_NULL, this function returns the required - initial value for the crc. Pre- and post-conditioning (one's complement) is - performed within this function so it shouldn't be done by the application. - - Usage example: - - uLong crc = crc32(0L, Z_NULL, 0); - - while (read_buffer(buffer, length) != EOF) { - crc = crc32(crc, buffer, length); - } - if (crc != original_crc) error(); -*/ - -/* -ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2)); - - Combine two CRC-32 check values into one. For two sequences of bytes, - seq1 and seq2 with lengths len1 and len2, CRC-32 check values were - calculated for each, crc1 and crc2. crc32_combine() returns the CRC-32 - check value of seq1 and seq2 concatenated, requiring only crc1, crc2, and - len2. -*/ - - - /* various hacks, don't look :) */ - -/* deflateInit and inflateInit are macros to allow checking the zlib version - * and the compiler's view of z_stream: - */ -ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level, - const char *version, int stream_size)); -ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm, - const char *version, int stream_size)); -ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int level, int method, - int windowBits, int memLevel, - int strategy, const char *version, - int stream_size)); -ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int windowBits, - const char *version, int stream_size)); -ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits, - unsigned char FAR *window, - const char *version, - int stream_size)); -#define deflateInit(strm, level) \ - deflateInit_((strm), (level), ZLIB_VERSION, (int)sizeof(z_stream)) -#define inflateInit(strm) \ - inflateInit_((strm), ZLIB_VERSION, (int)sizeof(z_stream)) -#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \ - deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\ - (strategy), ZLIB_VERSION, (int)sizeof(z_stream)) -#define inflateInit2(strm, windowBits) \ - inflateInit2_((strm), (windowBits), ZLIB_VERSION, \ - (int)sizeof(z_stream)) -#define inflateBackInit(strm, windowBits, window) \ - inflateBackInit_((strm), (windowBits), (window), \ - ZLIB_VERSION, (int)sizeof(z_stream)) - -#ifndef Z_SOLO - -/* gzgetc() macro and its supporting function and exposed data structure. Note - * that the real internal state is much larger than the exposed structure. - * This abbreviated structure exposes just enough for the gzgetc() macro. The - * user should not mess with these exposed elements, since their names or - * behavior could change in the future, perhaps even capriciously. They can - * only be used by the gzgetc() macro. You have been warned. - */ -ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file)); /* backward compatibility */ -#ifdef Z_PREFIX_SET -# undef z_gzgetc -# define z_gzgetc(g) \ - ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : gzgetc(g)) -#else -# define gzgetc(g) \ - ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : gzgetc(g)) -#endif - -/* provide 64-bit offset functions if _LARGEFILE64_SOURCE defined, and/or - * change the regular functions to 64 bits if _FILE_OFFSET_BITS is 64 (if - * both are true, the application gets the *64 functions, and the regular - * functions are changed to 64 bits) -- in case these are set on systems - * without large file support, _LFS64_LARGEFILE must also be true - */ -#ifdef Z_LARGE64 - ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *)); - ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int)); - ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile)); - ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile)); - ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off64_t)); - ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off64_t)); -#endif - -#if !defined(ZLIB_INTERNAL) && defined(Z_WANT64) -# ifdef Z_PREFIX_SET -# define z_gzopen z_gzopen64 -# define z_gzseek z_gzseek64 -# define z_gztell z_gztell64 -# define z_gzoffset z_gzoffset64 -# define z_adler32_combine z_adler32_combine64 -# define z_crc32_combine z_crc32_combine64 -# else -# define gzopen gzopen64 -# define gzseek gzseek64 -# define gztell gztell64 -# define gzoffset gzoffset64 -# define adler32_combine adler32_combine64 -# define crc32_combine crc32_combine64 -# endif -# ifndef Z_LARGE64 - ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *)); - ZEXTERN z_off_t ZEXPORT gzseek64 OF((gzFile, z_off_t, int)); - ZEXTERN z_off_t ZEXPORT gztell64 OF((gzFile)); - ZEXTERN z_off_t ZEXPORT gzoffset64 OF((gzFile)); - ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t)); - ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t)); -# endif -#else - ZEXTERN gzFile ZEXPORT gzopen OF((const char *, const char *)); - ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile, z_off_t, int)); - ZEXTERN z_off_t ZEXPORT gztell OF((gzFile)); - ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile)); - ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t)); - ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t)); -#endif - -#else /* Z_SOLO */ - - ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t)); - ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t)); - -#endif /* !Z_SOLO */ - -/* hack for buggy compilers */ -#if !defined(ZUTIL_H) && !defined(NO_DUMMY_DECL) - struct internal_state {int dummy;}; -#endif - -/* undocumented functions */ -ZEXTERN const char * ZEXPORT zError OF((int)); -ZEXTERN int ZEXPORT inflateSyncPoint OF((z_streamp)); -ZEXTERN const z_crc_t FAR * ZEXPORT get_crc_table OF((void)); -ZEXTERN int ZEXPORT inflateUndermine OF((z_streamp, int)); -ZEXTERN int ZEXPORT inflateResetKeep OF((z_streamp)); -ZEXTERN int ZEXPORT deflateResetKeep OF((z_streamp)); -#if defined(_WIN32) && !defined(Z_SOLO) -ZEXTERN gzFile ZEXPORT gzopen_w OF((const wchar_t *path, - const char *mode)); -#endif -#if defined(STDC) || defined(Z_HAVE_STDARG_H) -# ifndef Z_SOLO -ZEXTERN int ZEXPORTVA gzvprintf Z_ARG((gzFile file, - const char *format, - va_list va)); -# endif -#endif - -#ifdef __cplusplus -} -#endif - -#endif /* ZLIB_H */ diff --git a/src/ioapi.c b/src/ioapi.c deleted file mode 100644 index 7f20c18..0000000 --- a/src/ioapi.c +++ /dev/null @@ -1,177 +0,0 @@ -/* ioapi.c -- IO base function header for compress/uncompress .zip
- files using zlib + zip or unzip API
-
- Version 1.01e, February 12th, 2005
-
- Copyright (C) 1998-2005 Gilles Vollant
-*/
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "zlib.h"
-#include "ioapi.h"
-
-
-
-/* I've found an old Unix (a SunOS 4.1.3_U1) without all SEEK_* defined.... */
-
-#ifndef SEEK_CUR
-#define SEEK_CUR 1
-#endif
-
-#ifndef SEEK_END
-#define SEEK_END 2
-#endif
-
-#ifndef SEEK_SET
-#define SEEK_SET 0
-#endif
-
-voidpf ZCALLBACK fopen_file_func OF((
- voidpf opaque,
- const char* filename,
- int mode));
-
-uLong ZCALLBACK fread_file_func OF((
- voidpf opaque,
- voidpf stream,
- void* buf,
- uLong size));
-
-uLong ZCALLBACK fwrite_file_func OF((
- voidpf opaque,
- voidpf stream,
- const void* buf,
- uLong size));
-
-long ZCALLBACK ftell_file_func OF((
- voidpf opaque,
- voidpf stream));
-
-long ZCALLBACK fseek_file_func OF((
- voidpf opaque,
- voidpf stream,
- uLong offset,
- int origin));
-
-int ZCALLBACK fclose_file_func OF((
- voidpf opaque,
- voidpf stream));
-
-int ZCALLBACK ferror_file_func OF((
- voidpf opaque,
- voidpf stream));
-
-
-voidpf ZCALLBACK fopen_file_func (opaque, filename, mode)
- voidpf opaque;
- const char* filename;
- int mode;
-{
- FILE* file = NULL;
- const char* mode_fopen = NULL;
- if ((mode & ZLIB_FILEFUNC_MODE_READWRITEFILTER)==ZLIB_FILEFUNC_MODE_READ)
- mode_fopen = "rb";
- else
- if (mode & ZLIB_FILEFUNC_MODE_EXISTING)
- mode_fopen = "r+b";
- else
- if (mode & ZLIB_FILEFUNC_MODE_CREATE)
- mode_fopen = "wb";
-
- if ((filename!=NULL) && (mode_fopen != NULL))
- file = fopen(filename, mode_fopen);
- return file;
-}
-
-
-uLong ZCALLBACK fread_file_func (opaque, stream, buf, size)
- voidpf opaque;
- voidpf stream;
- void* buf;
- uLong size;
-{
- uLong ret;
- ret = (uLong)fread(buf, 1, (size_t)size, (FILE *)stream);
- return ret;
-}
-
-
-uLong ZCALLBACK fwrite_file_func (opaque, stream, buf, size)
- voidpf opaque;
- voidpf stream;
- const void* buf;
- uLong size;
-{
- uLong ret;
- ret = (uLong)fwrite(buf, 1, (size_t)size, (FILE *)stream);
- return ret;
-}
-
-long ZCALLBACK ftell_file_func (opaque, stream)
- voidpf opaque;
- voidpf stream;
-{
- long ret;
- ret = ftell((FILE *)stream);
- return ret;
-}
-
-long ZCALLBACK fseek_file_func (opaque, stream, offset, origin)
- voidpf opaque;
- voidpf stream;
- uLong offset;
- int origin;
-{
- int fseek_origin=0;
- long ret;
- switch (origin)
- {
- case ZLIB_FILEFUNC_SEEK_CUR :
- fseek_origin = SEEK_CUR;
- break;
- case ZLIB_FILEFUNC_SEEK_END :
- fseek_origin = SEEK_END;
- break;
- case ZLIB_FILEFUNC_SEEK_SET :
- fseek_origin = SEEK_SET;
- break;
- default: return -1;
- }
- ret = 0;
- fseek((FILE *)stream, offset, fseek_origin);
- return ret;
-}
-
-int ZCALLBACK fclose_file_func (opaque, stream)
- voidpf opaque;
- voidpf stream;
-{
- int ret;
- ret = fclose((FILE *)stream);
- return ret;
-}
-
-int ZCALLBACK ferror_file_func (opaque, stream)
- voidpf opaque;
- voidpf stream;
-{
- int ret;
- ret = ferror((FILE *)stream);
- return ret;
-}
-
-void fill_fopen_filefunc (pzlib_filefunc_def)
- zlib_filefunc_def* pzlib_filefunc_def;
-{
- pzlib_filefunc_def->zopen_file = fopen_file_func;
- pzlib_filefunc_def->zread_file = fread_file_func;
- pzlib_filefunc_def->zwrite_file = fwrite_file_func;
- pzlib_filefunc_def->ztell_file = ftell_file_func;
- pzlib_filefunc_def->zseek_file = fseek_file_func;
- pzlib_filefunc_def->zclose_file = fclose_file_func;
- pzlib_filefunc_def->zerror_file = ferror_file_func;
- pzlib_filefunc_def->opaque = NULL;
-}
diff --git a/src/ioapi.h b/src/ioapi.h deleted file mode 100644 index e73a3b2..0000000 --- a/src/ioapi.h +++ /dev/null @@ -1,75 +0,0 @@ -/* ioapi.h -- IO base function header for compress/uncompress .zip
- files using zlib + zip or unzip API
-
- Version 1.01e, February 12th, 2005
-
- Copyright (C) 1998-2005 Gilles Vollant
-*/
-
-#ifndef _ZLIBIOAPI_H
-#define _ZLIBIOAPI_H
-
-
-#define ZLIB_FILEFUNC_SEEK_CUR (1)
-#define ZLIB_FILEFUNC_SEEK_END (2)
-#define ZLIB_FILEFUNC_SEEK_SET (0)
-
-#define ZLIB_FILEFUNC_MODE_READ (1)
-#define ZLIB_FILEFUNC_MODE_WRITE (2)
-#define ZLIB_FILEFUNC_MODE_READWRITEFILTER (3)
-
-#define ZLIB_FILEFUNC_MODE_EXISTING (4)
-#define ZLIB_FILEFUNC_MODE_CREATE (8)
-
-
-#ifndef ZCALLBACK
-
-#if (defined(WIN32) || defined (WINDOWS) || defined (_WINDOWS)) && defined(CALLBACK) && defined (USEWINDOWS_CALLBACK)
-#define ZCALLBACK CALLBACK
-#else
-#define ZCALLBACK
-#endif
-#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef voidpf (ZCALLBACK *open_file_func) OF((voidpf opaque, const char* filename, int mode));
-typedef uLong (ZCALLBACK *read_file_func) OF((voidpf opaque, voidpf stream, void* buf, uLong size));
-typedef uLong (ZCALLBACK *write_file_func) OF((voidpf opaque, voidpf stream, const void* buf, uLong size));
-typedef long (ZCALLBACK *tell_file_func) OF((voidpf opaque, voidpf stream));
-typedef long (ZCALLBACK *seek_file_func) OF((voidpf opaque, voidpf stream, uLong offset, int origin));
-typedef int (ZCALLBACK *close_file_func) OF((voidpf opaque, voidpf stream));
-typedef int (ZCALLBACK *testerror_file_func) OF((voidpf opaque, voidpf stream));
-
-typedef struct zlib_filefunc_def_s
-{
- open_file_func zopen_file;
- read_file_func zread_file;
- write_file_func zwrite_file;
- tell_file_func ztell_file;
- seek_file_func zseek_file;
- close_file_func zclose_file;
- testerror_file_func zerror_file;
- voidpf opaque;
-} zlib_filefunc_def;
-
-
-
-void fill_fopen_filefunc OF((zlib_filefunc_def* pzlib_filefunc_def));
-
-#define ZREAD(filefunc,filestream,buf,size) ((*((filefunc).zread_file))((filefunc).opaque,filestream,buf,size))
-#define ZWRITE(filefunc,filestream,buf,size) ((*((filefunc).zwrite_file))((filefunc).opaque,filestream,buf,size))
-#define ZTELL(filefunc,filestream) ((*((filefunc).ztell_file))((filefunc).opaque,filestream))
-#define ZSEEK(filefunc,filestream,pos,mode) ((*((filefunc).zseek_file))((filefunc).opaque,filestream,pos,mode))
-#define ZCLOSE(filefunc,filestream) ((*((filefunc).zclose_file))((filefunc).opaque,filestream))
-#define ZERROR(filefunc,filestream) ((*((filefunc).zerror_file))((filefunc).opaque,filestream))
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
-
diff --git a/src/loadzip.cpp b/src/loadzip.cpp deleted file mode 100644 index 6e082d7..0000000 --- a/src/loadzip.cpp +++ /dev/null @@ -1,222 +0,0 @@ -/* - * Snes9x - Portable Super Nintendo Entertainment System (TM) emulator. - * - * (c) Copyright 1996 - 2001 Gary Henderson (gary.henderson@ntlworld.com) and - * Jerremy Koot (jkoot@snes9x.com) - * - * Super FX C emulator code - * (c) Copyright 1997 - 1999 Ivar (ivar@snes9x.com) and - * Gary Henderson. - * Super FX assembler emulator code (c) Copyright 1998 zsKnight and _Demo_. - * - * DSP1 emulator code (c) Copyright 1998 Ivar, _Demo_ and Gary Henderson. - * C4 asm and some C emulation code (c) Copyright 2000 zsKnight and _Demo_. - * C4 C code (c) Copyright 2001 Gary Henderson (gary.henderson@ntlworld.com). - * - * DOS port code contains the works of other authors. See headers in - * individual files. - * - * Snes9x homepage: http://www.snes9x.com - * - * Permission to use, copy, modify and distribute Snes9x in both binary and - * source form, for non-commercial purposes, is hereby granted without fee, - * providing that this license information and copyright notice appear with - * all copies and any derived work. - * - * This software is provided 'as-is', without any express or implied - * warranty. In no event shall the authors be held liable for any damages - * arising from the use of this software. - * - * Snes9x is freeware for PERSONAL USE only. Commercial users should - * seek permission of the copyright holders first. Commercial use includes - * charging money for Snes9x or software derived from Snes9x. - * - * The copyright holders request that bug fixes and improvements to the code - * should be forwarded to them so everyone can benefit from the modifications - * in future versions. - * - * Super NES and Super Nintendo Entertainment System are trademarks of - * Nintendo Co., Limited and its subsidiary companies. - */ - -#include "port.h" - -#ifdef UNZIP_SUPPORT -/**********************************************************************************************/ -/* Loadzip.CPP */ -/* This file contains a function for loading a SNES ROM image from a zip file */ -/**********************************************************************************************/ - -#include <string.h> -#include <ctype.h> - -#ifndef NO_INLINE_SET_GET -#define NO_INLINE_SET_GET -#endif - -#include "snes9x.h" -#include "memmap.h" - -#include "unzip.h" -//#include <assert.h> -#include <stdio.h> -#include <stdlib.h> - -bool8 LoadZip(const char* zipname, - int32 *TotalFileSize, - int32 *headers) -{/* - *TotalFileSize = 0; - *headers = 0; - - unzFile file = unzOpen(zipname); - if(file == NULL) - return (FALSE); - - // find largest file in zip file (under MAX_ROM_SIZE) - // or a file with extension .1 - char filename[132]; - int filesize = 0; - int port = unzGoToFirstFile(file); - unz_file_info info; - while(port == UNZ_OK) - { - char name[132]; - unzGetCurrentFileInfo(file, &info, name,128, NULL,0, NULL,0); - -#if 0 - int calc_size = info.uncompressed_size / 0x2000; - calc_size *= 0x2000; - if(!(info.uncompressed_size - calc_size == 512 || info.uncompressed_size == calc_size)) - { - port = unzGoToNextFile(file); - continue; - } -#endif - - if(info.uncompressed_size > (CMemory::MAX_ROM_SIZE + 512)) - { - port = unzGoToNextFile(file); - continue; - } - - if ((int) info.uncompressed_size > filesize) - { - strcpy(filename,name); - filesize = info.uncompressed_size; - } - int len = strlen(name); - if(name[len-2] == '.' && name[len-1] == '1') - { - strcpy(filename,name); - filesize = info.uncompressed_size; - break; - } - port = unzGoToNextFile(file); - } - if( !(port == UNZ_END_OF_LIST_OF_FILE || port == UNZ_OK) || filesize == 0) - { - unzClose(file); - return (FALSE); - } - - // Find extension - char tmp[2]; - tmp[0] = tmp[1] = 0; - char *ext = strrchr(filename,'.'); - if(ext) ext++; - else ext = tmp; - - uint8 *ptr = Memory.ROM; - bool8 more = FALSE; - - unzLocateFile(file,filename,1); - unzGetCurrentFileInfo(file, &info, filename,128, NULL,0, NULL,0); - - if( unzOpenCurrentFile(file) != UNZ_OK ) - { - unzClose(file); - return (FALSE); - } - - do - { -// assert(info.uncompressed_size <= CMemory::MAX_ROM_SIZE + 512); - int FileSize = info.uncompressed_size; - - int calc_size = FileSize / 0x2000; - calc_size *= 0x2000; - - int l = unzReadCurrentFile(file,ptr,FileSize); - if(unzCloseCurrentFile(file) == UNZ_CRCERROR) - { - unzClose(file); - return (FALSE); - } - - if(l <= 0 || l != FileSize) - { - unzClose(file); - switch(l) - { - case UNZ_ERRNO: - break; - case UNZ_EOF: - break; - case UNZ_PARAMERROR: - break; - case UNZ_BADZIPFILE: - break; - case UNZ_INTERNALERROR: - break; - case UNZ_CRCERROR: - break; - } - return (FALSE); - } - - if ((FileSize - calc_size == 512 && !Settings.ForceNoHeader) || - Settings.ForceHeader) - { - memmove (ptr, ptr + 512, calc_size); - (*headers)++; - FileSize -= 512; - } - ptr += FileSize; - (*TotalFileSize) += FileSize; - - int len; - if (ptr - Memory.ROM < CMemory::MAX_ROM_SIZE + 0x200 && - (isdigit (ext [0]) && ext [1] == 0 && ext [0] < '9')) - { - more = TRUE; - ext [0]++; - } - else if (ptr - Memory.ROM < CMemory::MAX_ROM_SIZE + 0x200 && - (((len = strlen (filename)) == 7 || len == 8) && - strncasecmp (filename, "sf", 2) == 0 && - isdigit (filename [2]) && isdigit (filename [3]) && isdigit (filename [4]) && - isdigit (filename [5]) && isalpha (filename [len - 1]))) - { - more = TRUE; - filename [len - 1]++; - } - else - more = FALSE; - - if(more) - { - if( unzLocateFile(file,filename,1) != UNZ_OK || - unzGetCurrentFileInfo(file, &info, filename,128, NULL,0, NULL,0) != UNZ_OK || - unzOpenCurrentFile(file) != UNZ_OK) - break; - } - - } while(more); - - unzClose(file); - return (TRUE); - */ - return (FALSE); -} -#endif diff --git a/src/memmap.cpp b/src/memmap.cpp index 8da6c34..e93beaa 100644 --- a/src/memmap.cpp +++ b/src/memmap.cpp @@ -355,17 +355,6 @@ again: int32 TotalFileSize = 0;
-#ifdef UNZIP_SUPPORT
-
- if( checkzip( fname ) )
- {
- if (!LoadZip (fname, &TotalFileSize, &HeaderCount))
- return (FALSE);
-
- strcpy (ROMFilename, fname);
- }
- else
-#endif
{
if ((ROMFile = OPEN_STREAM (fname, "rb")) == NULL)
return (FALSE);
@@ -64,7 +64,6 @@ I can't take it anymore, it's too convoluted. So I've commented out the entire //Required Includes #include "pixform.h" -#include <zlib.h> //RC //#include <windows.h> #include <limits.h> #include <string.h> @@ -127,7 +126,7 @@ typedef short int16_32; #define CHECK_SOUND() #define VOID void #define CPU_SHUTDOWN -#define UNZIP_SUPPORT +//#define UNZIP_SUPPORT #define ZeroMemory(a,b) memset((a),0,(b)) #define PACKING __attribute__ ((packed)) #define ALIGN_BY_ONE __attribute__ ((aligned (1), packed)) @@ -230,7 +229,7 @@ typedef short int16_32; #define CHECK_SOUND() #define VOID void #define CPU_SHUTDOWN -#define UNZIP_SUPPORT +//#define UNZIP_SUPPORT #define ZeroMemory(a,b) memset((a),0,(b)) #define PACKING __attribute__ ((packed)) #define ALIGN_BY_ONE __attribute__ ((aligned (1), packed)) diff --git a/src/snes9x.h b/src/snes9x.h index 0076b79..787b60d 100644 --- a/src/snes9x.h +++ b/src/snes9x.h @@ -67,7 +67,7 @@ #define SEEK_STREAM(p,r,s) memstream_seek(p,r,s)
#elif defined(ZLIB)
//#ifndef __WIN32__
-#include "zlib.h"
+//#include "zlib.h"
//#endif
#define STREAM gzFile
#define READ_STREAM(p,l,s) gzread (s,p,l)
diff --git a/src/spc700/debug/port.h b/src/spc700/debug/port.h index 1e18886..dfc3030 100644 --- a/src/spc700/debug/port.h +++ b/src/spc700/debug/port.h @@ -168,7 +168,7 @@ void gp32_fseek (long position,int ref,long *s); //#undef ZLIB
//#define ZLIB
-#define UNZIP_SUPPORT
+//#define UNZIP_SUPPORT
#define SPC700_SHUTDOWN
diff --git a/src/unzip.c b/src/unzip.c deleted file mode 100644 index 3a70629..0000000 --- a/src/unzip.c +++ /dev/null @@ -1,1598 +0,0 @@ -/* unzip.c -- IO for uncompress .zip files using zlib
- Version 1.01e, February 12th, 2005
-
- Copyright (C) 1998-2005 Gilles Vollant
-
- Read unzip.h for more info
-*/
-
-/* Decryption code comes from crypt.c by Info-ZIP but has been greatly reduced in terms of
-compatibility with older software. The following is from the original crypt.c. Code
-woven in by Terry Thorsen 1/2003.
-*/
-/*
- Copyright (c) 1990-2000 Info-ZIP. All rights reserved.
-
- See the accompanying file LICENSE, version 2000-Apr-09 or later
- (the contents of which are also included in zip.h) for terms of use.
- If, for some reason, all these files are missing, the Info-ZIP license
- also may be found at: ftp://ftp.info-zip.org/pub/infozip/license.html
-*/
-/*
- crypt.c (full version) by Info-ZIP. Last revised: [see crypt.h]
-
- The encryption/decryption parts of this source code (as opposed to the
- non-echoing password parts) were originally written in Europe. The
- whole source package can be freely distributed, including from the USA.
- (Prior to January 2000, re-export from the US was a violation of US law.)
- */
-
-/*
- This encryption code is a direct transcription of the algorithm from
- Roger Schlafly, described by Phil Katz in the file appnote.txt. This
- file (appnote.txt) is distributed with the PKZIP program (even in the
- version without encryption capabilities).
- */
-
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include "zlib.h"
-#include "unzip.h"
-
-#ifdef STDC
-# include <stddef.h>
-# include <string.h>
-# include <stdlib.h>
-#endif
-#ifdef NO_ERRNO_H
- extern int errno;
-#else
-# include <errno.h>
-#endif
-
-
-#ifndef local
-# define local static
-#endif
-/* compile with -Dlocal if your debugger can't find static symbols */
-
-
-#ifndef CASESENSITIVITYDEFAULT_NO
-# if !defined(unix) && !defined(CASESENSITIVITYDEFAULT_YES)
-# define CASESENSITIVITYDEFAULT_NO
-# endif
-#endif
-
-
-#ifndef UNZ_BUFSIZE
-#define UNZ_BUFSIZE (16384)
-#endif
-
-#ifndef UNZ_MAXFILENAMEINZIP
-#define UNZ_MAXFILENAMEINZIP (256)
-#endif
-
-#ifndef ALLOC
-# define ALLOC(size) (malloc(size))
-#endif
-#ifndef TRYFREE
-# define TRYFREE(p) {if (p) free(p);}
-#endif
-
-#define SIZECENTRALDIRITEM (0x2e)
-#define SIZEZIPLOCALHEADER (0x1e)
-
-
-
-
-const char unz_copyright[] =
- " unzip 1.01 Copyright 1998-2004 Gilles Vollant - http://www.winimage.com/zLibDll";
-
-/* unz_file_info_interntal contain internal info about a file in zipfile*/
-typedef struct unz_file_info_internal_s
-{
- uLong offset_curfile;/* relative offset of local header 4 bytes */
-} unz_file_info_internal;
-
-
-/* file_in_zip_read_info_s contain internal information about a file in zipfile,
- when reading and decompress it */
-typedef struct
-{
- char *read_buffer; /* internal buffer for compressed data */
- z_stream stream; /* zLib stream structure for inflate */
-
- uLong pos_in_zipfile; /* position in byte on the zipfile, for fseek*/
- uLong stream_initialised; /* flag set if stream structure is initialised*/
-
- uLong offset_local_extrafield;/* offset of the local extra field */
- uInt size_local_extrafield;/* size of the local extra field */
- uLong pos_local_extrafield; /* position in the local extra field in read*/
-
- uLong crc32; /* crc32 of all data uncompressed */
- uLong crc32_wait; /* crc32 we must obtain after decompress all */
- uLong rest_read_compressed; /* number of byte to be decompressed */
- uLong rest_read_uncompressed;/*number of byte to be obtained after decomp*/
- zlib_filefunc_def z_filefunc;
- voidpf filestream; /* io structore of the zipfile */
- uLong compression_method; /* compression method (0==store) */
- uLong byte_before_the_zipfile;/* byte before the zipfile, (>0 for sfx)*/
- int raw;
-} file_in_zip_read_info_s;
-
-
-/* unz_s contain internal information about the zipfile
-*/
-typedef struct
-{
- zlib_filefunc_def z_filefunc;
- voidpf filestream; /* io structore of the zipfile */
- unz_global_info gi; /* public global information */
- uLong byte_before_the_zipfile;/* byte before the zipfile, (>0 for sfx)*/
- uLong num_file; /* number of the current file in the zipfile*/
- uLong pos_in_central_dir; /* pos of the current file in the central dir*/
- uLong current_file_ok; /* flag about the usability of the current file*/
- uLong central_pos; /* position of the beginning of the central dir*/
-
- uLong size_central_dir; /* size of the central directory */
- uLong offset_central_dir; /* offset of start of central directory with
- respect to the starting disk number */
-
- unz_file_info cur_file_info; /* public info about the current file in zip*/
- unz_file_info_internal cur_file_info_internal; /* private info about it*/
- file_in_zip_read_info_s* pfile_in_zip_read; /* structure about the current
- file if we are decompressing it */
- int encrypted;
-# ifndef NOUNCRYPT
- unsigned long keys[3]; /* keys defining the pseudo-random sequence */
- const unsigned long* pcrc_32_tab;
-# endif
-} unz_s;
-
-
-#ifndef NOUNCRYPT
-#include "crypt.h"
-#endif
-
-/* ===========================================================================
- Read a byte from a gz_stream; update next_in and avail_in. Return EOF
- for end of file.
- IN assertion: the stream s has been sucessfully opened for reading.
-*/
-
-
-local int unzlocal_getByte OF((
- const zlib_filefunc_def* pzlib_filefunc_def,
- voidpf filestream,
- int *pi));
-
-local int unzlocal_getByte(pzlib_filefunc_def,filestream,pi)
- const zlib_filefunc_def* pzlib_filefunc_def;
- voidpf filestream;
- int *pi;
-{
- unsigned char c;
- int err = (int)ZREAD(*pzlib_filefunc_def,filestream,&c,1);
- if (err==1)
- {
- *pi = (int)c;
- return UNZ_OK;
- }
- else
- {
- if (ZERROR(*pzlib_filefunc_def,filestream))
- return UNZ_ERRNO;
- else
- return UNZ_EOF;
- }
-}
-
-
-/* ===========================================================================
- Reads a long in LSB order from the given gz_stream. Sets
-*/
-local int unzlocal_getShort OF((
- const zlib_filefunc_def* pzlib_filefunc_def,
- voidpf filestream,
- uLong *pX));
-
-local int unzlocal_getShort (pzlib_filefunc_def,filestream,pX)
- const zlib_filefunc_def* pzlib_filefunc_def;
- voidpf filestream;
- uLong *pX;
-{
- uLong x ;
- int i;
- int err;
-
- err = unzlocal_getByte(pzlib_filefunc_def,filestream,&i);
- x = (uLong)i;
-
- if (err==UNZ_OK)
- err = unzlocal_getByte(pzlib_filefunc_def,filestream,&i);
- x += ((uLong)i)<<8;
-
- if (err==UNZ_OK)
- *pX = x;
- else
- *pX = 0;
- return err;
-}
-
-local int unzlocal_getLong OF((
- const zlib_filefunc_def* pzlib_filefunc_def,
- voidpf filestream,
- uLong *pX));
-
-local int unzlocal_getLong (pzlib_filefunc_def,filestream,pX)
- const zlib_filefunc_def* pzlib_filefunc_def;
- voidpf filestream;
- uLong *pX;
-{
- uLong x ;
- int i;
- int err;
-
- err = unzlocal_getByte(pzlib_filefunc_def,filestream,&i);
- x = (uLong)i;
-
- if (err==UNZ_OK)
- err = unzlocal_getByte(pzlib_filefunc_def,filestream,&i);
- x += ((uLong)i)<<8;
-
- if (err==UNZ_OK)
- err = unzlocal_getByte(pzlib_filefunc_def,filestream,&i);
- x += ((uLong)i)<<16;
-
- if (err==UNZ_OK)
- err = unzlocal_getByte(pzlib_filefunc_def,filestream,&i);
- x += ((uLong)i)<<24;
-
- if (err==UNZ_OK)
- *pX = x;
- else
- *pX = 0;
- return err;
-}
-
-
-/* My own strcmpi / strcasecmp */
-local int strcmpcasenosensitive_internal (fileName1,fileName2)
- const char* fileName1;
- const char* fileName2;
-{
- for (;;)
- {
- char c1=*(fileName1++);
- char c2=*(fileName2++);
- if ((c1>='a') && (c1<='z'))
- c1 -= 0x20;
- if ((c2>='a') && (c2<='z'))
- c2 -= 0x20;
- if (c1=='\0')
- return ((c2=='\0') ? 0 : -1);
- if (c2=='\0')
- return 1;
- if (c1<c2)
- return -1;
- if (c1>c2)
- return 1;
- }
-}
-
-
-#ifdef CASESENSITIVITYDEFAULT_NO
-#define CASESENSITIVITYDEFAULTVALUE 2
-#else
-#define CASESENSITIVITYDEFAULTVALUE 1
-#endif
-
-#ifndef STRCMPCASENOSENTIVEFUNCTION
-#define STRCMPCASENOSENTIVEFUNCTION strcmpcasenosensitive_internal
-#endif
-
-/*
- Compare two filename (fileName1,fileName2).
- If iCaseSenisivity = 1, comparision is case sensitivity (like strcmp)
- If iCaseSenisivity = 2, comparision is not case sensitivity (like strcmpi
- or strcasecmp)
- If iCaseSenisivity = 0, case sensitivity is defaut of your operating system
- (like 1 on Unix, 2 on Windows)
-
-*/
-extern int ZEXPORT unzStringFileNameCompare (fileName1,fileName2,iCaseSensitivity)
- const char* fileName1;
- const char* fileName2;
- int iCaseSensitivity;
-{
- if (iCaseSensitivity==0)
- iCaseSensitivity=CASESENSITIVITYDEFAULTVALUE;
-
- if (iCaseSensitivity==1)
- return strcmp(fileName1,fileName2);
-
- return STRCMPCASENOSENTIVEFUNCTION(fileName1,fileName2);
-}
-
-#ifndef BUFREADCOMMENT
-#define BUFREADCOMMENT (0x400)
-#endif
-
-/*
- Locate the Central directory of a zipfile (at the end, just before
- the global comment)
-*/
-local uLong unzlocal_SearchCentralDir OF((
- const zlib_filefunc_def* pzlib_filefunc_def,
- voidpf filestream));
-
-local uLong unzlocal_SearchCentralDir(pzlib_filefunc_def,filestream)
- const zlib_filefunc_def* pzlib_filefunc_def;
- voidpf filestream;
-{
- unsigned char* buf;
- uLong uSizeFile;
- uLong uBackRead;
- uLong uMaxBack=0xffff; /* maximum size of global comment */
- uLong uPosFound=0;
-
- if (ZSEEK(*pzlib_filefunc_def,filestream,0,ZLIB_FILEFUNC_SEEK_END) != 0)
- return 0;
-
-
- uSizeFile = ZTELL(*pzlib_filefunc_def,filestream);
-
- if (uMaxBack>uSizeFile)
- uMaxBack = uSizeFile;
-
- buf = (unsigned char*)ALLOC(BUFREADCOMMENT+4);
- if (buf==NULL)
- return 0;
-
- uBackRead = 4;
- while (uBackRead<uMaxBack)
- {
- uLong uReadSize,uReadPos ;
- int i;
- if (uBackRead+BUFREADCOMMENT>uMaxBack)
- uBackRead = uMaxBack;
- else
- uBackRead+=BUFREADCOMMENT;
- uReadPos = uSizeFile-uBackRead ;
-
- uReadSize = ((BUFREADCOMMENT+4) < (uSizeFile-uReadPos)) ?
- (BUFREADCOMMENT+4) : (uSizeFile-uReadPos);
- if (ZSEEK(*pzlib_filefunc_def,filestream,uReadPos,ZLIB_FILEFUNC_SEEK_SET)!=0)
- break;
-
- if (ZREAD(*pzlib_filefunc_def,filestream,buf,uReadSize)!=uReadSize)
- break;
-
- for (i=(int)uReadSize-3; (i--)>0;)
- if (((*(buf+i))==0x50) && ((*(buf+i+1))==0x4b) &&
- ((*(buf+i+2))==0x05) && ((*(buf+i+3))==0x06))
- {
- uPosFound = uReadPos+i;
- break;
- }
-
- if (uPosFound!=0)
- break;
- }
- TRYFREE(buf);
- return uPosFound;
-}
-
-/*
- Open a Zip file. path contain the full pathname (by example,
- on a Windows NT computer "c:\\test\\zlib114.zip" or on an Unix computer
- "zlib/zlib114.zip".
- If the zipfile cannot be opened (file doesn't exist or in not valid), the
- return value is NULL.
- Else, the return value is a unzFile Handle, usable with other function
- of this unzip package.
-*/
-extern unzFile ZEXPORT unzOpen2 (path, pzlib_filefunc_def)
- const char *path;
- zlib_filefunc_def* pzlib_filefunc_def;
-{
- unz_s us;
- unz_s *s;
- uLong central_pos,uL;
-
- uLong number_disk; /* number of the current dist, used for
- spaning ZIP, unsupported, always 0*/
- uLong number_disk_with_CD; /* number the the disk with central dir, used
- for spaning ZIP, unsupported, always 0*/
- uLong number_entry_CD; /* total number of entries in
- the central dir
- (same than number_entry on nospan) */
-
- int err=UNZ_OK;
-
- if (unz_copyright[0]!=' ')
- return NULL;
-
- if (pzlib_filefunc_def==NULL)
- fill_fopen_filefunc(&us.z_filefunc);
- else
- us.z_filefunc = *pzlib_filefunc_def;
-
- us.filestream= (*(us.z_filefunc.zopen_file))(us.z_filefunc.opaque,
- path,
- ZLIB_FILEFUNC_MODE_READ |
- ZLIB_FILEFUNC_MODE_EXISTING);
- if (us.filestream==NULL)
- return NULL;
-
- central_pos = unzlocal_SearchCentralDir(&us.z_filefunc,us.filestream);
- if (central_pos==0)
- err=UNZ_ERRNO;
-
- if (ZSEEK(us.z_filefunc, us.filestream,
- central_pos,ZLIB_FILEFUNC_SEEK_SET)!=0)
- err=UNZ_ERRNO;
-
- /* the signature, already checked */
- if (unzlocal_getLong(&us.z_filefunc, us.filestream,&uL)!=UNZ_OK)
- err=UNZ_ERRNO;
-
- /* number of this disk */
- if (unzlocal_getShort(&us.z_filefunc, us.filestream,&number_disk)!=UNZ_OK)
- err=UNZ_ERRNO;
-
- /* number of the disk with the start of the central directory */
- if (unzlocal_getShort(&us.z_filefunc, us.filestream,&number_disk_with_CD)!=UNZ_OK)
- err=UNZ_ERRNO;
-
- /* total number of entries in the central dir on this disk */
- if (unzlocal_getShort(&us.z_filefunc, us.filestream,&us.gi.number_entry)!=UNZ_OK)
- err=UNZ_ERRNO;
-
- /* total number of entries in the central dir */
- if (unzlocal_getShort(&us.z_filefunc, us.filestream,&number_entry_CD)!=UNZ_OK)
- err=UNZ_ERRNO;
-
- if ((number_entry_CD!=us.gi.number_entry) ||
- (number_disk_with_CD!=0) ||
- (number_disk!=0))
- err=UNZ_BADZIPFILE;
-
- /* size of the central directory */
- if (unzlocal_getLong(&us.z_filefunc, us.filestream,&us.size_central_dir)!=UNZ_OK)
- err=UNZ_ERRNO;
-
- /* offset of start of central directory with respect to the
- starting disk number */
- if (unzlocal_getLong(&us.z_filefunc, us.filestream,&us.offset_central_dir)!=UNZ_OK)
- err=UNZ_ERRNO;
-
- /* zipfile comment length */
- if (unzlocal_getShort(&us.z_filefunc, us.filestream,&us.gi.size_comment)!=UNZ_OK)
- err=UNZ_ERRNO;
-
- if ((central_pos<us.offset_central_dir+us.size_central_dir) &&
- (err==UNZ_OK))
- err=UNZ_BADZIPFILE;
-
- if (err!=UNZ_OK)
- {
- ZCLOSE(us.z_filefunc, us.filestream);
- return NULL;
- }
-
- us.byte_before_the_zipfile = central_pos -
- (us.offset_central_dir+us.size_central_dir);
- us.central_pos = central_pos;
- us.pfile_in_zip_read = NULL;
- us.encrypted = 0;
-
-
- s=(unz_s*)ALLOC(sizeof(unz_s));
- *s=us;
- unzGoToFirstFile((unzFile)s);
- return (unzFile)s;
-}
-
-
-extern unzFile ZEXPORT unzOpen (path)
- const char *path;
-{
- return unzOpen2(path, NULL);
-}
-
-/*
- Close a ZipFile opened with unzipOpen.
- If there is files inside the .Zip opened with unzipOpenCurrentFile (see later),
- these files MUST be closed with unzipCloseCurrentFile before call unzipClose.
- return UNZ_OK if there is no problem. */
-extern int ZEXPORT unzClose (file)
- unzFile file;
-{
- unz_s* s;
- if (file==NULL)
- return UNZ_PARAMERROR;
- s=(unz_s*)file;
-
- if (s->pfile_in_zip_read!=NULL)
- unzCloseCurrentFile(file);
-
- ZCLOSE(s->z_filefunc, s->filestream);
- TRYFREE(s);
- return UNZ_OK;
-}
-
-
-/*
- Write info about the ZipFile in the *pglobal_info structure.
- No preparation of the structure is needed
- return UNZ_OK if there is no problem. */
-extern int ZEXPORT unzGetGlobalInfo (file,pglobal_info)
- unzFile file;
- unz_global_info *pglobal_info;
-{
- unz_s* s;
- if (file==NULL)
- return UNZ_PARAMERROR;
- s=(unz_s*)file;
- *pglobal_info=s->gi;
- return UNZ_OK;
-}
-
-
-/*
- Translate date/time from Dos format to tm_unz (readable more easilty)
-*/
-local void unzlocal_DosDateToTmuDate (ulDosDate, ptm)
- uLong ulDosDate;
- tm_unz* ptm;
-{
- uLong uDate;
- uDate = (uLong)(ulDosDate>>16);
- ptm->tm_mday = (uInt)(uDate&0x1f) ;
- ptm->tm_mon = (uInt)((((uDate)&0x1E0)/0x20)-1) ;
- ptm->tm_year = (uInt)(((uDate&0x0FE00)/0x0200)+1980) ;
-
- ptm->tm_hour = (uInt) ((ulDosDate &0xF800)/0x800);
- ptm->tm_min = (uInt) ((ulDosDate&0x7E0)/0x20) ;
- ptm->tm_sec = (uInt) (2*(ulDosDate&0x1f)) ;
-}
-
-/*
- Get Info about the current file in the zipfile, with internal only info
-*/
-local int unzlocal_GetCurrentFileInfoInternal OF((unzFile file,
- unz_file_info *pfile_info,
- unz_file_info_internal
- *pfile_info_internal,
- char *szFileName,
- uLong fileNameBufferSize,
- void *extraField,
- uLong extraFieldBufferSize,
- char *szComment,
- uLong commentBufferSize));
-
-local int unzlocal_GetCurrentFileInfoInternal (file,
- pfile_info,
- pfile_info_internal,
- szFileName, fileNameBufferSize,
- extraField, extraFieldBufferSize,
- szComment, commentBufferSize)
- unzFile file;
- unz_file_info *pfile_info;
- unz_file_info_internal *pfile_info_internal;
- char *szFileName;
- uLong fileNameBufferSize;
- void *extraField;
- uLong extraFieldBufferSize;
- char *szComment;
- uLong commentBufferSize;
-{
- unz_s* s;
- unz_file_info file_info;
- unz_file_info_internal file_info_internal;
- int err=UNZ_OK;
- uLong uMagic;
- long lSeek=0;
-
- if (file==NULL)
- return UNZ_PARAMERROR;
- s=(unz_s*)file;
- if (ZSEEK(s->z_filefunc, s->filestream,
- s->pos_in_central_dir+s->byte_before_the_zipfile,
- ZLIB_FILEFUNC_SEEK_SET)!=0)
- err=UNZ_ERRNO;
-
-
- /* we check the magic */
- if (err==UNZ_OK)
- if (unzlocal_getLong(&s->z_filefunc, s->filestream,&uMagic) != UNZ_OK)
- err=UNZ_ERRNO;
- else if (uMagic!=0x02014b50)
- err=UNZ_BADZIPFILE;
-
- if (unzlocal_getShort(&s->z_filefunc, s->filestream,&file_info.version) != UNZ_OK)
- err=UNZ_ERRNO;
-
- if (unzlocal_getShort(&s->z_filefunc, s->filestream,&file_info.version_needed) != UNZ_OK)
- err=UNZ_ERRNO;
-
- if (unzlocal_getShort(&s->z_filefunc, s->filestream,&file_info.flag) != UNZ_OK)
- err=UNZ_ERRNO;
-
- if (unzlocal_getShort(&s->z_filefunc, s->filestream,&file_info.compression_method) != UNZ_OK)
- err=UNZ_ERRNO;
-
- if (unzlocal_getLong(&s->z_filefunc, s->filestream,&file_info.dosDate) != UNZ_OK)
- err=UNZ_ERRNO;
-
- unzlocal_DosDateToTmuDate(file_info.dosDate,&file_info.tmu_date);
-
- if (unzlocal_getLong(&s->z_filefunc, s->filestream,&file_info.crc) != UNZ_OK)
- err=UNZ_ERRNO;
-
- if (unzlocal_getLong(&s->z_filefunc, s->filestream,&file_info.compressed_size) != UNZ_OK)
- err=UNZ_ERRNO;
-
- if (unzlocal_getLong(&s->z_filefunc, s->filestream,&file_info.uncompressed_size) != UNZ_OK)
- err=UNZ_ERRNO;
-
- if (unzlocal_getShort(&s->z_filefunc, s->filestream,&file_info.size_filename) != UNZ_OK)
- err=UNZ_ERRNO;
-
- if (unzlocal_getShort(&s->z_filefunc, s->filestream,&file_info.size_file_extra) != UNZ_OK)
- err=UNZ_ERRNO;
-
- if (unzlocal_getShort(&s->z_filefunc, s->filestream,&file_info.size_file_comment) != UNZ_OK)
- err=UNZ_ERRNO;
-
- if (unzlocal_getShort(&s->z_filefunc, s->filestream,&file_info.disk_num_start) != UNZ_OK)
- err=UNZ_ERRNO;
-
- if (unzlocal_getShort(&s->z_filefunc, s->filestream,&file_info.internal_fa) != UNZ_OK)
- err=UNZ_ERRNO;
-
- if (unzlocal_getLong(&s->z_filefunc, s->filestream,&file_info.external_fa) != UNZ_OK)
- err=UNZ_ERRNO;
-
- if (unzlocal_getLong(&s->z_filefunc, s->filestream,&file_info_internal.offset_curfile) != UNZ_OK)
- err=UNZ_ERRNO;
-
- lSeek+=file_info.size_filename;
- if ((err==UNZ_OK) && (szFileName!=NULL))
- {
- uLong uSizeRead ;
- if (file_info.size_filename<fileNameBufferSize)
- {
- *(szFileName+file_info.size_filename)='\0';
- uSizeRead = file_info.size_filename;
- }
- else
- uSizeRead = fileNameBufferSize;
-
- if ((file_info.size_filename>0) && (fileNameBufferSize>0))
- if (ZREAD(s->z_filefunc, s->filestream,szFileName,uSizeRead)!=uSizeRead)
- err=UNZ_ERRNO;
- lSeek -= uSizeRead;
- }
-
-
- if ((err==UNZ_OK) && (extraField!=NULL))
- {
- uLong uSizeRead ;
- if (file_info.size_file_extra<extraFieldBufferSize)
- uSizeRead = file_info.size_file_extra;
- else
- uSizeRead = extraFieldBufferSize;
-
- if (lSeek!=0)
- if (ZSEEK(s->z_filefunc, s->filestream,lSeek,ZLIB_FILEFUNC_SEEK_CUR)==0)
- lSeek=0;
- else
- err=UNZ_ERRNO;
- if ((file_info.size_file_extra>0) && (extraFieldBufferSize>0))
- if (ZREAD(s->z_filefunc, s->filestream,extraField,uSizeRead)!=uSizeRead)
- err=UNZ_ERRNO;
- lSeek += file_info.size_file_extra - uSizeRead;
- }
- else
- lSeek+=file_info.size_file_extra;
-
-
- if ((err==UNZ_OK) && (szComment!=NULL))
- {
- uLong uSizeRead ;
- if (file_info.size_file_comment<commentBufferSize)
- {
- *(szComment+file_info.size_file_comment)='\0';
- uSizeRead = file_info.size_file_comment;
- }
- else
- uSizeRead = commentBufferSize;
-
- if (lSeek!=0)
- if (ZSEEK(s->z_filefunc, s->filestream,lSeek,ZLIB_FILEFUNC_SEEK_CUR)==0)
- lSeek=0;
- else
- err=UNZ_ERRNO;
- if ((file_info.size_file_comment>0) && (commentBufferSize>0))
- if (ZREAD(s->z_filefunc, s->filestream,szComment,uSizeRead)!=uSizeRead)
- err=UNZ_ERRNO;
- lSeek+=file_info.size_file_comment - uSizeRead;
- }
- else
- lSeek+=file_info.size_file_comment;
-
- if ((err==UNZ_OK) && (pfile_info!=NULL))
- *pfile_info=file_info;
-
- if ((err==UNZ_OK) && (pfile_info_internal!=NULL))
- *pfile_info_internal=file_info_internal;
-
- return err;
-}
-
-
-
-/*
- Write info about the ZipFile in the *pglobal_info structure.
- No preparation of the structure is needed
- return UNZ_OK if there is no problem.
-*/
-extern int ZEXPORT unzGetCurrentFileInfo (file,
- pfile_info,
- szFileName, fileNameBufferSize,
- extraField, extraFieldBufferSize,
- szComment, commentBufferSize)
- unzFile file;
- unz_file_info *pfile_info;
- char *szFileName;
- uLong fileNameBufferSize;
- void *extraField;
- uLong extraFieldBufferSize;
- char *szComment;
- uLong commentBufferSize;
-{
- return unzlocal_GetCurrentFileInfoInternal(file,pfile_info,NULL,
- szFileName,fileNameBufferSize,
- extraField,extraFieldBufferSize,
- szComment,commentBufferSize);
-}
-
-/*
- Set the current file of the zipfile to the first file.
- return UNZ_OK if there is no problem
-*/
-extern int ZEXPORT unzGoToFirstFile (file)
- unzFile file;
-{
- int err=UNZ_OK;
- unz_s* s;
- if (file==NULL)
- return UNZ_PARAMERROR;
- s=(unz_s*)file;
- s->pos_in_central_dir=s->offset_central_dir;
- s->num_file=0;
- err=unzlocal_GetCurrentFileInfoInternal(file,&s->cur_file_info,
- &s->cur_file_info_internal,
- NULL,0,NULL,0,NULL,0);
- s->current_file_ok = (err == UNZ_OK);
- return err;
-}
-
-/*
- Set the current file of the zipfile to the next file.
- return UNZ_OK if there is no problem
- return UNZ_END_OF_LIST_OF_FILE if the actual file was the latest.
-*/
-extern int ZEXPORT unzGoToNextFile (file)
- unzFile file;
-{
- unz_s* s;
- int err;
-
- if (file==NULL)
- return UNZ_PARAMERROR;
- s=(unz_s*)file;
- if (!s->current_file_ok)
- return UNZ_END_OF_LIST_OF_FILE;
- if (s->gi.number_entry != 0xffff) /* 2^16 files overflow hack */
- if (s->num_file+1==s->gi.number_entry)
- return UNZ_END_OF_LIST_OF_FILE;
-
- s->pos_in_central_dir += SIZECENTRALDIRITEM + s->cur_file_info.size_filename +
- s->cur_file_info.size_file_extra + s->cur_file_info.size_file_comment ;
- s->num_file++;
- err = unzlocal_GetCurrentFileInfoInternal(file,&s->cur_file_info,
- &s->cur_file_info_internal,
- NULL,0,NULL,0,NULL,0);
- s->current_file_ok = (err == UNZ_OK);
- return err;
-}
-
-
-/*
- Try locate the file szFileName in the zipfile.
- For the iCaseSensitivity signification, see unzipStringFileNameCompare
-
- return value :
- UNZ_OK if the file is found. It becomes the current file.
- UNZ_END_OF_LIST_OF_FILE if the file is not found
-*/
-extern int ZEXPORT unzLocateFile (file, szFileName, iCaseSensitivity)
- unzFile file;
- const char *szFileName;
- int iCaseSensitivity;
-{
- unz_s* s;
- int err;
-
- /* We remember the 'current' position in the file so that we can jump
- * back there if we fail.
- */
- unz_file_info cur_file_infoSaved;
- unz_file_info_internal cur_file_info_internalSaved;
- uLong num_fileSaved;
- uLong pos_in_central_dirSaved;
-
-
- if (file==NULL)
- return UNZ_PARAMERROR;
-
- if (strlen(szFileName)>=UNZ_MAXFILENAMEINZIP)
- return UNZ_PARAMERROR;
-
- s=(unz_s*)file;
- if (!s->current_file_ok)
- return UNZ_END_OF_LIST_OF_FILE;
-
- /* Save the current state */
- num_fileSaved = s->num_file;
- pos_in_central_dirSaved = s->pos_in_central_dir;
- cur_file_infoSaved = s->cur_file_info;
- cur_file_info_internalSaved = s->cur_file_info_internal;
-
- err = unzGoToFirstFile(file);
-
- while (err == UNZ_OK)
- {
- char szCurrentFileName[UNZ_MAXFILENAMEINZIP+1];
- err = unzGetCurrentFileInfo(file,NULL,
- szCurrentFileName,sizeof(szCurrentFileName)-1,
- NULL,0,NULL,0);
- if (err == UNZ_OK)
- {
- if (unzStringFileNameCompare(szCurrentFileName,
- szFileName,iCaseSensitivity)==0)
- return UNZ_OK;
- err = unzGoToNextFile(file);
- }
- }
-
- /* We failed, so restore the state of the 'current file' to where we
- * were.
- */
- s->num_file = num_fileSaved ;
- s->pos_in_central_dir = pos_in_central_dirSaved ;
- s->cur_file_info = cur_file_infoSaved;
- s->cur_file_info_internal = cur_file_info_internalSaved;
- return err;
-}
-
-
-/*
-///////////////////////////////////////////
-// Contributed by Ryan Haksi (mailto://cryogen@infoserve.net)
-// I need random access
-//
-// Further optimization could be realized by adding an ability
-// to cache the directory in memory. The goal being a single
-// comprehensive file read to put the file I need in a memory.
-*/
-
-/*
-typedef struct unz_file_pos_s
-{
- uLong pos_in_zip_directory; // offset in file
- uLong num_of_file; // # of file
-} unz_file_pos;
-*/
-
-extern int ZEXPORT unzGetFilePos(file, file_pos)
- unzFile file;
- unz_file_pos* file_pos;
-{
- unz_s* s;
-
- if (file==NULL || file_pos==NULL)
- return UNZ_PARAMERROR;
- s=(unz_s*)file;
- if (!s->current_file_ok)
- return UNZ_END_OF_LIST_OF_FILE;
-
- file_pos->pos_in_zip_directory = s->pos_in_central_dir;
- file_pos->num_of_file = s->num_file;
-
- return UNZ_OK;
-}
-
-extern int ZEXPORT unzGoToFilePos(file, file_pos)
- unzFile file;
- unz_file_pos* file_pos;
-{
- unz_s* s;
- int err;
-
- if (file==NULL || file_pos==NULL)
- return UNZ_PARAMERROR;
- s=(unz_s*)file;
-
- /* jump to the right spot */
- s->pos_in_central_dir = file_pos->pos_in_zip_directory;
- s->num_file = file_pos->num_of_file;
-
- /* set the current file */
- err = unzlocal_GetCurrentFileInfoInternal(file,&s->cur_file_info,
- &s->cur_file_info_internal,
- NULL,0,NULL,0,NULL,0);
- /* return results */
- s->current_file_ok = (err == UNZ_OK);
- return err;
-}
-
-/*
-// Unzip Helper Functions - should be here?
-///////////////////////////////////////////
-*/
-
-/*
- Read the local header of the current zipfile
- Check the coherency of the local header and info in the end of central
- directory about this file
- store in *piSizeVar the size of extra info in local header
- (filename and size of extra field data)
-*/
-local int unzlocal_CheckCurrentFileCoherencyHeader (s,piSizeVar,
- poffset_local_extrafield,
- psize_local_extrafield)
- unz_s* s;
- uInt* piSizeVar;
- uLong *poffset_local_extrafield;
- uInt *psize_local_extrafield;
-{
- uLong uMagic,uData,uFlags;
- uLong size_filename;
- uLong size_extra_field;
- int err=UNZ_OK;
-
- *piSizeVar = 0;
- *poffset_local_extrafield = 0;
- *psize_local_extrafield = 0;
-
- if (ZSEEK(s->z_filefunc, s->filestream,s->cur_file_info_internal.offset_curfile +
- s->byte_before_the_zipfile,ZLIB_FILEFUNC_SEEK_SET)!=0)
- return UNZ_ERRNO;
-
-
- if (err==UNZ_OK)
- if (unzlocal_getLong(&s->z_filefunc, s->filestream,&uMagic) != UNZ_OK)
- err=UNZ_ERRNO;
- else if (uMagic!=0x04034b50)
- err=UNZ_BADZIPFILE;
-
- if (unzlocal_getShort(&s->z_filefunc, s->filestream,&uData) != UNZ_OK)
- err=UNZ_ERRNO;
-/*
- else if ((err==UNZ_OK) && (uData!=s->cur_file_info.wVersion))
- err=UNZ_BADZIPFILE;
-*/
- if (unzlocal_getShort(&s->z_filefunc, s->filestream,&uFlags) != UNZ_OK)
- err=UNZ_ERRNO;
-
- if (unzlocal_getShort(&s->z_filefunc, s->filestream,&uData) != UNZ_OK)
- err=UNZ_ERRNO;
- else if ((err==UNZ_OK) && (uData!=s->cur_file_info.compression_method))
- err=UNZ_BADZIPFILE;
-
- if ((err==UNZ_OK) && (s->cur_file_info.compression_method!=0) &&
- (s->cur_file_info.compression_method!=Z_DEFLATED))
- err=UNZ_BADZIPFILE;
-
- if (unzlocal_getLong(&s->z_filefunc, s->filestream,&uData) != UNZ_OK) /* date/time */
- err=UNZ_ERRNO;
-
- if (unzlocal_getLong(&s->z_filefunc, s->filestream,&uData) != UNZ_OK) /* crc */
- err=UNZ_ERRNO;
- else if ((err==UNZ_OK) && (uData!=s->cur_file_info.crc) &&
- ((uFlags & 8)==0))
- err=UNZ_BADZIPFILE;
-
- if (unzlocal_getLong(&s->z_filefunc, s->filestream,&uData) != UNZ_OK) /* size compr */
- err=UNZ_ERRNO;
- else if ((err==UNZ_OK) && (uData!=s->cur_file_info.compressed_size) &&
- ((uFlags & 8)==0))
- err=UNZ_BADZIPFILE;
-
- if (unzlocal_getLong(&s->z_filefunc, s->filestream,&uData) != UNZ_OK) /* size uncompr */
- err=UNZ_ERRNO;
- else if ((err==UNZ_OK) && (uData!=s->cur_file_info.uncompressed_size) &&
- ((uFlags & 8)==0))
- err=UNZ_BADZIPFILE;
-
-
- if (unzlocal_getShort(&s->z_filefunc, s->filestream,&size_filename) != UNZ_OK)
- err=UNZ_ERRNO;
- else if ((err==UNZ_OK) && (size_filename!=s->cur_file_info.size_filename))
- err=UNZ_BADZIPFILE;
-
- *piSizeVar += (uInt)size_filename;
-
- if (unzlocal_getShort(&s->z_filefunc, s->filestream,&size_extra_field) != UNZ_OK)
- err=UNZ_ERRNO;
- *poffset_local_extrafield= s->cur_file_info_internal.offset_curfile +
- SIZEZIPLOCALHEADER + size_filename;
- *psize_local_extrafield = (uInt)size_extra_field;
-
- *piSizeVar += (uInt)size_extra_field;
-
- return err;
-}
-
-/*
- Open for reading data the current file in the zipfile.
- If there is no error and the file is opened, the return value is UNZ_OK.
-*/
-extern int ZEXPORT unzOpenCurrentFile3 (file, method, level, raw, password)
- unzFile file;
- int* method;
- int* level;
- int raw;
- const char* password;
-{
- int err=UNZ_OK;
- uInt iSizeVar;
- unz_s* s;
- file_in_zip_read_info_s* pfile_in_zip_read_info;
- uLong offset_local_extrafield; /* offset of the local extra field */
- uInt size_local_extrafield; /* size of the local extra field */
-# ifndef NOUNCRYPT
- char source[12];
-# else
- if (password != NULL)
- return UNZ_PARAMERROR;
-# endif
-
- if (file==NULL)
- return UNZ_PARAMERROR;
- s=(unz_s*)file;
- if (!s->current_file_ok)
- return UNZ_PARAMERROR;
-
- if (s->pfile_in_zip_read != NULL)
- unzCloseCurrentFile(file);
-
- if (unzlocal_CheckCurrentFileCoherencyHeader(s,&iSizeVar,
- &offset_local_extrafield,&size_local_extrafield)!=UNZ_OK)
- return UNZ_BADZIPFILE;
-
- pfile_in_zip_read_info = (file_in_zip_read_info_s*)
- ALLOC(sizeof(file_in_zip_read_info_s));
- if (pfile_in_zip_read_info==NULL)
- return UNZ_INTERNALERROR;
-
- pfile_in_zip_read_info->read_buffer=(char*)ALLOC(UNZ_BUFSIZE);
- pfile_in_zip_read_info->offset_local_extrafield = offset_local_extrafield;
- pfile_in_zip_read_info->size_local_extrafield = size_local_extrafield;
- pfile_in_zip_read_info->pos_local_extrafield=0;
- pfile_in_zip_read_info->raw=raw;
-
- if (pfile_in_zip_read_info->read_buffer==NULL)
- {
- TRYFREE(pfile_in_zip_read_info);
- return UNZ_INTERNALERROR;
- }
-
- pfile_in_zip_read_info->stream_initialised=0;
-
- if (method!=NULL)
- *method = (int)s->cur_file_info.compression_method;
-
- if (level!=NULL)
- {
- *level = 6;
- switch (s->cur_file_info.flag & 0x06)
- {
- case 6 : *level = 1; break;
- case 4 : *level = 2; break;
- case 2 : *level = 9; break;
- }
- }
-
- if ((s->cur_file_info.compression_method!=0) &&
- (s->cur_file_info.compression_method!=Z_DEFLATED))
- err=UNZ_BADZIPFILE;
-
- pfile_in_zip_read_info->crc32_wait=s->cur_file_info.crc;
- pfile_in_zip_read_info->crc32=0;
- pfile_in_zip_read_info->compression_method =
- s->cur_file_info.compression_method;
- pfile_in_zip_read_info->filestream=s->filestream;
- pfile_in_zip_read_info->z_filefunc=s->z_filefunc;
- pfile_in_zip_read_info->byte_before_the_zipfile=s->byte_before_the_zipfile;
-
- pfile_in_zip_read_info->stream.total_out = 0;
-
- if ((s->cur_file_info.compression_method==Z_DEFLATED) &&
- (!raw))
- {
- pfile_in_zip_read_info->stream.zalloc = (alloc_func)0;
- pfile_in_zip_read_info->stream.zfree = (free_func)0;
- pfile_in_zip_read_info->stream.opaque = (voidpf)0;
- pfile_in_zip_read_info->stream.next_in = (voidpf)0;
- pfile_in_zip_read_info->stream.avail_in = 0;
-
- err=inflateInit2(&pfile_in_zip_read_info->stream, -MAX_WBITS);
- if (err == Z_OK)
- pfile_in_zip_read_info->stream_initialised=1;
- else
- {
- TRYFREE(pfile_in_zip_read_info);
- return err;
- }
- /* windowBits is passed < 0 to tell that there is no zlib header.
- * Note that in this case inflate *requires* an extra "dummy" byte
- * after the compressed stream in order to complete decompression and
- * return Z_STREAM_END.
- * In unzip, i don't wait absolutely Z_STREAM_END because I known the
- * size of both compressed and uncompressed data
- */
- }
- pfile_in_zip_read_info->rest_read_compressed =
- s->cur_file_info.compressed_size ;
- pfile_in_zip_read_info->rest_read_uncompressed =
- s->cur_file_info.uncompressed_size ;
-
-
- pfile_in_zip_read_info->pos_in_zipfile =
- s->cur_file_info_internal.offset_curfile + SIZEZIPLOCALHEADER +
- iSizeVar;
-
- pfile_in_zip_read_info->stream.avail_in = (uInt)0;
-
- s->pfile_in_zip_read = pfile_in_zip_read_info;
-
-# ifndef NOUNCRYPT
- if (password != NULL)
- {
- int i;
- s->pcrc_32_tab = get_crc_table();
- init_keys(password,s->keys,s->pcrc_32_tab);
- if (ZSEEK(s->z_filefunc, s->filestream,
- s->pfile_in_zip_read->pos_in_zipfile +
- s->pfile_in_zip_read->byte_before_the_zipfile,
- SEEK_SET)!=0)
- return UNZ_INTERNALERROR;
- if(ZREAD(s->z_filefunc, s->filestream,source, 12)<12)
- return UNZ_INTERNALERROR;
-
- for (i = 0; i<12; i++)
- zdecode(s->keys,s->pcrc_32_tab,source[i]);
-
- s->pfile_in_zip_read->pos_in_zipfile+=12;
- s->encrypted=1;
- }
-# endif
-
-
- return UNZ_OK;
-}
-
-extern int ZEXPORT unzOpenCurrentFile (file)
- unzFile file;
-{
- return unzOpenCurrentFile3(file, NULL, NULL, 0, NULL);
-}
-
-extern int ZEXPORT unzOpenCurrentFilePassword (file, password)
- unzFile file;
- const char* password;
-{
- return unzOpenCurrentFile3(file, NULL, NULL, 0, password);
-}
-
-extern int ZEXPORT unzOpenCurrentFile2 (file,method,level,raw)
- unzFile file;
- int* method;
- int* level;
- int raw;
-{
- return unzOpenCurrentFile3(file, method, level, raw, NULL);
-}
-
-/*
- Read bytes from the current file.
- buf contain buffer where data must be copied
- len the size of buf.
-
- return the number of byte copied if somes bytes are copied
- return 0 if the end of file was reached
- return <0 with error code if there is an error
- (UNZ_ERRNO for IO error, or zLib error for uncompress error)
-*/
-extern int ZEXPORT unzReadCurrentFile (file, buf, len)
- unzFile file;
- voidp buf;
- unsigned len;
-{
- int err=UNZ_OK;
- uInt iRead = 0;
- unz_s* s;
- file_in_zip_read_info_s* pfile_in_zip_read_info;
- if (file==NULL)
- return UNZ_PARAMERROR;
- s=(unz_s*)file;
- pfile_in_zip_read_info=s->pfile_in_zip_read;
-
- if (pfile_in_zip_read_info==NULL)
- return UNZ_PARAMERROR;
-
-
- if ((pfile_in_zip_read_info->read_buffer == NULL))
- return UNZ_END_OF_LIST_OF_FILE;
- if (len==0)
- return 0;
-
- pfile_in_zip_read_info->stream.next_out = (Bytef*)buf;
-
- pfile_in_zip_read_info->stream.avail_out = (uInt)len;
-
- if ((len>pfile_in_zip_read_info->rest_read_uncompressed) &&
- (!(pfile_in_zip_read_info->raw)))
- pfile_in_zip_read_info->stream.avail_out =
- (uInt)pfile_in_zip_read_info->rest_read_uncompressed;
-
- if ((len>pfile_in_zip_read_info->rest_read_compressed+
- pfile_in_zip_read_info->stream.avail_in) &&
- (pfile_in_zip_read_info->raw))
- pfile_in_zip_read_info->stream.avail_out =
- (uInt)pfile_in_zip_read_info->rest_read_compressed+
- pfile_in_zip_read_info->stream.avail_in;
-
- while (pfile_in_zip_read_info->stream.avail_out>0)
- {
- if ((pfile_in_zip_read_info->stream.avail_in==0) &&
- (pfile_in_zip_read_info->rest_read_compressed>0))
- {
- uInt uReadThis = UNZ_BUFSIZE;
- if (pfile_in_zip_read_info->rest_read_compressed<uReadThis)
- uReadThis = (uInt)pfile_in_zip_read_info->rest_read_compressed;
- if (uReadThis == 0)
- return UNZ_EOF;
- if (ZSEEK(pfile_in_zip_read_info->z_filefunc,
- pfile_in_zip_read_info->filestream,
- pfile_in_zip_read_info->pos_in_zipfile +
- pfile_in_zip_read_info->byte_before_the_zipfile,
- ZLIB_FILEFUNC_SEEK_SET)!=0)
- return UNZ_ERRNO;
- if (ZREAD(pfile_in_zip_read_info->z_filefunc,
- pfile_in_zip_read_info->filestream,
- pfile_in_zip_read_info->read_buffer,
- uReadThis)!=uReadThis)
- return UNZ_ERRNO;
-
-
-# ifndef NOUNCRYPT
- if(s->encrypted)
- {
- uInt i;
- for(i=0;i<uReadThis;i++)
- pfile_in_zip_read_info->read_buffer[i] =
- zdecode(s->keys,s->pcrc_32_tab,
- pfile_in_zip_read_info->read_buffer[i]);
- }
-# endif
-
-
- pfile_in_zip_read_info->pos_in_zipfile += uReadThis;
-
- pfile_in_zip_read_info->rest_read_compressed-=uReadThis;
-
- pfile_in_zip_read_info->stream.next_in =
- (Bytef*)pfile_in_zip_read_info->read_buffer;
- pfile_in_zip_read_info->stream.avail_in = (uInt)uReadThis;
- }
-
- if ((pfile_in_zip_read_info->compression_method==0) || (pfile_in_zip_read_info->raw))
- {
- uInt uDoCopy,i ;
-
- if ((pfile_in_zip_read_info->stream.avail_in == 0) &&
- (pfile_in_zip_read_info->rest_read_compressed == 0))
- return (iRead==0) ? UNZ_EOF : iRead;
-
- if (pfile_in_zip_read_info->stream.avail_out <
- pfile_in_zip_read_info->stream.avail_in)
- uDoCopy = pfile_in_zip_read_info->stream.avail_out ;
- else
- uDoCopy = pfile_in_zip_read_info->stream.avail_in ;
-
- for (i=0;i<uDoCopy;i++)
- *(pfile_in_zip_read_info->stream.next_out+i) =
- *(pfile_in_zip_read_info->stream.next_in+i);
-
- pfile_in_zip_read_info->crc32 = crc32(pfile_in_zip_read_info->crc32,
- pfile_in_zip_read_info->stream.next_out,
- uDoCopy);
- pfile_in_zip_read_info->rest_read_uncompressed-=uDoCopy;
- pfile_in_zip_read_info->stream.avail_in -= uDoCopy;
- pfile_in_zip_read_info->stream.avail_out -= uDoCopy;
- pfile_in_zip_read_info->stream.next_out += uDoCopy;
- pfile_in_zip_read_info->stream.next_in += uDoCopy;
- pfile_in_zip_read_info->stream.total_out += uDoCopy;
- iRead += uDoCopy;
- }
- else
- {
- uLong uTotalOutBefore,uTotalOutAfter;
- const Bytef *bufBefore;
- uLong uOutThis;
- int flush=Z_SYNC_FLUSH;
-
- uTotalOutBefore = pfile_in_zip_read_info->stream.total_out;
- bufBefore = pfile_in_zip_read_info->stream.next_out;
-
- /*
- if ((pfile_in_zip_read_info->rest_read_uncompressed ==
- pfile_in_zip_read_info->stream.avail_out) &&
- (pfile_in_zip_read_info->rest_read_compressed == 0))
- flush = Z_FINISH;
- */
- err=inflate(&pfile_in_zip_read_info->stream,flush);
-
- if ((err>=0) && (pfile_in_zip_read_info->stream.msg!=NULL))
- err = Z_DATA_ERROR;
-
- uTotalOutAfter = pfile_in_zip_read_info->stream.total_out;
- uOutThis = uTotalOutAfter-uTotalOutBefore;
-
- pfile_in_zip_read_info->crc32 =
- crc32(pfile_in_zip_read_info->crc32,bufBefore,
- (uInt)(uOutThis));
-
- pfile_in_zip_read_info->rest_read_uncompressed -=
- uOutThis;
-
- iRead += (uInt)(uTotalOutAfter - uTotalOutBefore);
-
- if (err==Z_STREAM_END)
- return (iRead==0) ? UNZ_EOF : iRead;
- if (err!=Z_OK)
- break;
- }
- }
-
- if (err==Z_OK)
- return iRead;
- return err;
-}
-
-
-/*
- Give the current position in uncompressed data
-*/
-extern z_off_t ZEXPORT unztell (file)
- unzFile file;
-{
- unz_s* s;
- file_in_zip_read_info_s* pfile_in_zip_read_info;
- if (file==NULL)
- return UNZ_PARAMERROR;
- s=(unz_s*)file;
- pfile_in_zip_read_info=s->pfile_in_zip_read;
-
- if (pfile_in_zip_read_info==NULL)
- return UNZ_PARAMERROR;
-
- return (z_off_t)pfile_in_zip_read_info->stream.total_out;
-}
-
-
-/*
- return 1 if the end of file was reached, 0 elsewhere
-*/
-extern int ZEXPORT unzeof (file)
- unzFile file;
-{
- unz_s* s;
- file_in_zip_read_info_s* pfile_in_zip_read_info;
- if (file==NULL)
- return UNZ_PARAMERROR;
- s=(unz_s*)file;
- pfile_in_zip_read_info=s->pfile_in_zip_read;
-
- if (pfile_in_zip_read_info==NULL)
- return UNZ_PARAMERROR;
-
- if (pfile_in_zip_read_info->rest_read_uncompressed == 0)
- return 1;
- else
- return 0;
-}
-
-
-
-/*
- Read extra field from the current file (opened by unzOpenCurrentFile)
- This is the local-header version of the extra field (sometimes, there is
- more info in the local-header version than in the central-header)
-
- if buf==NULL, it return the size of the local extra field that can be read
-
- if buf!=NULL, len is the size of the buffer, the extra header is copied in
- buf.
- the return value is the number of bytes copied in buf, or (if <0)
- the error code
-*/
-extern int ZEXPORT unzGetLocalExtrafield (file,buf,len)
- unzFile file;
- voidp buf;
- unsigned len;
-{
- unz_s* s;
- file_in_zip_read_info_s* pfile_in_zip_read_info;
- uInt read_now;
- uLong size_to_read;
-
- if (file==NULL)
- return UNZ_PARAMERROR;
- s=(unz_s*)file;
- pfile_in_zip_read_info=s->pfile_in_zip_read;
-
- if (pfile_in_zip_read_info==NULL)
- return UNZ_PARAMERROR;
-
- size_to_read = (pfile_in_zip_read_info->size_local_extrafield -
- pfile_in_zip_read_info->pos_local_extrafield);
-
- if (buf==NULL)
- return (int)size_to_read;
-
- if (len>size_to_read)
- read_now = (uInt)size_to_read;
- else
- read_now = (uInt)len ;
-
- if (read_now==0)
- return 0;
-
- if (ZSEEK(pfile_in_zip_read_info->z_filefunc,
- pfile_in_zip_read_info->filestream,
- pfile_in_zip_read_info->offset_local_extrafield +
- pfile_in_zip_read_info->pos_local_extrafield,
- ZLIB_FILEFUNC_SEEK_SET)!=0)
- return UNZ_ERRNO;
-
- if (ZREAD(pfile_in_zip_read_info->z_filefunc,
- pfile_in_zip_read_info->filestream,
- buf,read_now)!=read_now)
- return UNZ_ERRNO;
-
- return (int)read_now;
-}
-
-/*
- Close the file in zip opened with unzipOpenCurrentFile
- Return UNZ_CRCERROR if all the file was read but the CRC is not good
-*/
-extern int ZEXPORT unzCloseCurrentFile (file)
- unzFile file;
-{
- int err=UNZ_OK;
-
- unz_s* s;
- file_in_zip_read_info_s* pfile_in_zip_read_info;
- if (file==NULL)
- return UNZ_PARAMERROR;
- s=(unz_s*)file;
- pfile_in_zip_read_info=s->pfile_in_zip_read;
-
- if (pfile_in_zip_read_info==NULL)
- return UNZ_PARAMERROR;
-
-
- if ((pfile_in_zip_read_info->rest_read_uncompressed == 0) &&
- (!pfile_in_zip_read_info->raw))
- {
- if (pfile_in_zip_read_info->crc32 != pfile_in_zip_read_info->crc32_wait)
- err=UNZ_CRCERROR;
- }
-
-
- TRYFREE(pfile_in_zip_read_info->read_buffer);
- pfile_in_zip_read_info->read_buffer = NULL;
- if (pfile_in_zip_read_info->stream_initialised)
- inflateEnd(&pfile_in_zip_read_info->stream);
-
- pfile_in_zip_read_info->stream_initialised = 0;
- TRYFREE(pfile_in_zip_read_info);
-
- s->pfile_in_zip_read=NULL;
-
- return err;
-}
-
-
-/*
- Get the global comment string of the ZipFile, in the szComment buffer.
- uSizeBuf is the size of the szComment buffer.
- return the number of byte copied or an error code <0
-*/
-extern int ZEXPORT unzGetGlobalComment (file, szComment, uSizeBuf)
- unzFile file;
- char *szComment;
- uLong uSizeBuf;
-{
- int err=UNZ_OK;
- unz_s* s;
- uLong uReadThis ;
- if (file==NULL)
- return UNZ_PARAMERROR;
- s=(unz_s*)file;
-
- uReadThis = uSizeBuf;
- if (uReadThis>s->gi.size_comment)
- uReadThis = s->gi.size_comment;
-
- if (ZSEEK(s->z_filefunc,s->filestream,s->central_pos+22,ZLIB_FILEFUNC_SEEK_SET)!=0)
- return UNZ_ERRNO;
-
- if (uReadThis>0)
- {
- *szComment='\0';
- if (ZREAD(s->z_filefunc,s->filestream,szComment,uReadThis)!=uReadThis)
- return UNZ_ERRNO;
- }
-
- if ((szComment != NULL) && (uSizeBuf > s->gi.size_comment))
- *(szComment+s->gi.size_comment)='\0';
- return (int)uReadThis;
-}
-
-/* Additions by RX '2004 */
-extern uLong ZEXPORT unzGetOffset (file)
- unzFile file;
-{
- unz_s* s;
-
- if (file==NULL)
- return UNZ_PARAMERROR;
- s=(unz_s*)file;
- if (!s->current_file_ok)
- return 0;
- if (s->gi.number_entry != 0 && s->gi.number_entry != 0xffff)
- if (s->num_file==s->gi.number_entry)
- return 0;
- return s->pos_in_central_dir;
-}
-
-extern int ZEXPORT unzSetOffset (file, pos)
- unzFile file;
- uLong pos;
-{
- unz_s* s;
- int err;
-
- if (file==NULL)
- return UNZ_PARAMERROR;
- s=(unz_s*)file;
-
- s->pos_in_central_dir = pos;
- s->num_file = s->gi.number_entry; /* hack */
- err = unzlocal_GetCurrentFileInfoInternal(file,&s->cur_file_info,
- &s->cur_file_info_internal,
- NULL,0,NULL,0,NULL,0);
- s->current_file_ok = (err == UNZ_OK);
- return err;
-}
diff --git a/src/unzip.h b/src/unzip.h deleted file mode 100644 index 14d7a6f..0000000 --- a/src/unzip.h +++ /dev/null @@ -1,356 +0,0 @@ -/* unzip.h -- IO for uncompress .zip files using zlib
- Version 1.01e, February 12th, 2005
-
- Copyright (C) 1998-2005 Gilles Vollant
-
- This unzip package allow extract file from .ZIP file, compatible with PKZip 2.04g
- WinZip, InfoZip tools and compatible.
-
- Multi volume ZipFile (span) are not supported.
- Encryption compatible with pkzip 2.04g only supported
- Old compressions used by old PKZip 1.x are not supported
-
-
- I WAIT FEEDBACK at mail info@winimage.com
- Visit also http://www.winimage.com/zLibDll/unzip.htm for evolution
-
- Condition of use and distribution are the same than zlib :
-
- This software is provided 'as-is', without any express or implied
- warranty. In no event will the authors be held liable for any damages
- arising from the use of this software.
-
- Permission is granted to anyone to use this software for any purpose,
- including commercial applications, and to alter it and redistribute it
- freely, subject to the following restrictions:
-
- 1. The origin of this software must not be misrepresented; you must not
- claim that you wrote the original software. If you use this software
- in a product, an acknowledgment in the product documentation would be
- appreciated but is not required.
- 2. Altered source versions must be plainly marked as such, and must not be
- misrepresented as being the original software.
- 3. This notice may not be removed or altered from any source distribution.
-
-
-*/
-
-/* for more info about .ZIP format, see
- http://www.info-zip.org/pub/infozip/doc/appnote-981119-iz.zip
- http://www.info-zip.org/pub/infozip/doc/
- PkWare has also a specification at :
- ftp://ftp.pkware.com/probdesc.zip
-*/
-
-#ifndef _unz_H
-#define _unz_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#define NOUNCRYPT
-
-#ifndef _ZLIB_H
-#include "zlib.h"
-#endif
-
-#ifndef _ZLIBIOAPI_H
-#include "ioapi.h"
-#endif
-
-#if defined(STRICTUNZIP) || defined(STRICTZIPUNZIP)
-/* like the STRICT of WIN32, we define a pointer that cannot be converted
- from (void*) without cast */
-typedef struct TagunzFile__ { int unused; } unzFile__;
-typedef unzFile__ *unzFile;
-#else
-typedef voidp unzFile;
-#endif
-
-
-#define UNZ_OK (0)
-#define UNZ_END_OF_LIST_OF_FILE (-100)
-#define UNZ_ERRNO (Z_ERRNO)
-#define UNZ_EOF (0)
-#define UNZ_PARAMERROR (-102)
-#define UNZ_BADZIPFILE (-103)
-#define UNZ_INTERNALERROR (-104)
-#define UNZ_CRCERROR (-105)
-
-/* tm_unz contain date/time info */
-typedef struct tm_unz_s
-{
- uInt tm_sec; /* seconds after the minute - [0,59] */
- uInt tm_min; /* minutes after the hour - [0,59] */
- uInt tm_hour; /* hours since midnight - [0,23] */
- uInt tm_mday; /* day of the month - [1,31] */
- uInt tm_mon; /* months since January - [0,11] */
- uInt tm_year; /* years - [1980..2044] */
-} tm_unz;
-
-/* unz_global_info structure contain global data about the ZIPfile
- These data comes from the end of central dir */
-typedef struct unz_global_info_s
-{
- uLong number_entry; /* total number of entries in
- the central dir on this disk */
- uLong size_comment; /* size of the global comment of the zipfile */
-} unz_global_info;
-
-
-/* unz_file_info contain information about a file in the zipfile */
-typedef struct unz_file_info_s
-{
- uLong version; /* version made by 2 bytes */
- uLong version_needed; /* version needed to extract 2 bytes */
- uLong flag; /* general purpose bit flag 2 bytes */
- uLong compression_method; /* compression method 2 bytes */
- uLong dosDate; /* last mod file date in Dos fmt 4 bytes */
- uLong crc; /* crc-32 4 bytes */
- uLong compressed_size; /* compressed size 4 bytes */
- uLong uncompressed_size; /* uncompressed size 4 bytes */
- uLong size_filename; /* filename length 2 bytes */
- uLong size_file_extra; /* extra field length 2 bytes */
- uLong size_file_comment; /* file comment length 2 bytes */
-
- uLong disk_num_start; /* disk number start 2 bytes */
- uLong internal_fa; /* internal file attributes 2 bytes */
- uLong external_fa; /* external file attributes 4 bytes */
-
- tm_unz tmu_date;
-} unz_file_info;
-
-extern int ZEXPORT unzStringFileNameCompare OF ((const char* fileName1,
- const char* fileName2,
- int iCaseSensitivity));
-/*
- Compare two filename (fileName1,fileName2).
- If iCaseSenisivity = 1, comparision is case sensitivity (like strcmp)
- If iCaseSenisivity = 2, comparision is not case sensitivity (like strcmpi
- or strcasecmp)
- If iCaseSenisivity = 0, case sensitivity is defaut of your operating system
- (like 1 on Unix, 2 on Windows)
-*/
-
-
-extern unzFile ZEXPORT unzOpen OF((const char *path));
-/*
- Open a Zip file. path contain the full pathname (by example,
- on a Windows XP computer "c:\\zlib\\zlib113.zip" or on an Unix computer
- "zlib/zlib113.zip".
- If the zipfile cannot be opened (file don't exist or in not valid), the
- return value is NULL.
- Else, the return value is a unzFile Handle, usable with other function
- of this unzip package.
-*/
-
-extern unzFile ZEXPORT unzOpen2 OF((const char *path,
- zlib_filefunc_def* pzlib_filefunc_def));
-/*
- Open a Zip file, like unzOpen, but provide a set of file low level API
- for read/write the zip file (see ioapi.h)
-*/
-
-extern int ZEXPORT unzClose OF((unzFile file));
-/*
- Close a ZipFile opened with unzipOpen.
- If there is files inside the .Zip opened with unzOpenCurrentFile (see later),
- these files MUST be closed with unzipCloseCurrentFile before call unzipClose.
- return UNZ_OK if there is no problem. */
-
-extern int ZEXPORT unzGetGlobalInfo OF((unzFile file,
- unz_global_info *pglobal_info));
-/*
- Write info about the ZipFile in the *pglobal_info structure.
- No preparation of the structure is needed
- return UNZ_OK if there is no problem. */
-
-
-extern int ZEXPORT unzGetGlobalComment OF((unzFile file,
- char *szComment,
- uLong uSizeBuf));
-/*
- Get the global comment string of the ZipFile, in the szComment buffer.
- uSizeBuf is the size of the szComment buffer.
- return the number of byte copied or an error code <0
-*/
-
-
-/***************************************************************************/
-/* Unzip package allow you browse the directory of the zipfile */
-
-extern int ZEXPORT unzGoToFirstFile OF((unzFile file));
-/*
- Set the current file of the zipfile to the first file.
- return UNZ_OK if there is no problem
-*/
-
-extern int ZEXPORT unzGoToNextFile OF((unzFile file));
-/*
- Set the current file of the zipfile to the next file.
- return UNZ_OK if there is no problem
- return UNZ_END_OF_LIST_OF_FILE if the actual file was the latest.
-*/
-
-extern int ZEXPORT unzLocateFile OF((unzFile file,
- const char *szFileName,
- int iCaseSensitivity));
-/*
- Try locate the file szFileName in the zipfile.
- For the iCaseSensitivity signification, see unzStringFileNameCompare
-
- return value :
- UNZ_OK if the file is found. It becomes the current file.
- UNZ_END_OF_LIST_OF_FILE if the file is not found
-*/
-
-
-/* ****************************************** */
-/* Ryan supplied functions */
-/* unz_file_info contain information about a file in the zipfile */
-typedef struct unz_file_pos_s
-{
- uLong pos_in_zip_directory; /* offset in zip file directory */
- uLong num_of_file; /* # of file */
-} unz_file_pos;
-
-extern int ZEXPORT unzGetFilePos(
- unzFile file,
- unz_file_pos* file_pos);
-
-extern int ZEXPORT unzGoToFilePos(
- unzFile file,
- unz_file_pos* file_pos);
-
-/* ****************************************** */
-
-extern int ZEXPORT unzGetCurrentFileInfo OF((unzFile file,
- unz_file_info *pfile_info,
- char *szFileName,
- uLong fileNameBufferSize,
- void *extraField,
- uLong extraFieldBufferSize,
- char *szComment,
- uLong commentBufferSize));
-/*
- Get Info about the current file
- if pfile_info!=NULL, the *pfile_info structure will contain somes info about
- the current file
- if szFileName!=NULL, the filemane string will be copied in szFileName
- (fileNameBufferSize is the size of the buffer)
- if extraField!=NULL, the extra field information will be copied in extraField
- (extraFieldBufferSize is the size of the buffer).
- This is the Central-header version of the extra field
- if szComment!=NULL, the comment string of the file will be copied in szComment
- (commentBufferSize is the size of the buffer)
-*/
-
-/***************************************************************************/
-/* for reading the content of the current zipfile, you can open it, read data
- from it, and close it (you can close it before reading all the file)
- */
-
-extern int ZEXPORT unzOpenCurrentFile OF((unzFile file));
-/*
- Open for reading data the current file in the zipfile.
- If there is no error, the return value is UNZ_OK.
-*/
-
-extern int ZEXPORT unzOpenCurrentFilePassword OF((unzFile file,
- const char* password));
-/*
- Open for reading data the current file in the zipfile.
- password is a crypting password
- If there is no error, the return value is UNZ_OK.
-*/
-
-extern int ZEXPORT unzOpenCurrentFile2 OF((unzFile file,
- int* method,
- int* level,
- int raw));
-/*
- Same than unzOpenCurrentFile, but open for read raw the file (not uncompress)
- if raw==1
- *method will receive method of compression, *level will receive level of
- compression
- note : you can set level parameter as NULL (if you did not want known level,
- but you CANNOT set method parameter as NULL
-*/
-
-extern int ZEXPORT unzOpenCurrentFile3 OF((unzFile file,
- int* method,
- int* level,
- int raw,
- const char* password));
-/*
- Same than unzOpenCurrentFile, but open for read raw the file (not uncompress)
- if raw==1
- *method will receive method of compression, *level will receive level of
- compression
- note : you can set level parameter as NULL (if you did not want known level,
- but you CANNOT set method parameter as NULL
-*/
-
-
-extern int ZEXPORT unzCloseCurrentFile OF((unzFile file));
-/*
- Close the file in zip opened with unzOpenCurrentFile
- Return UNZ_CRCERROR if all the file was read but the CRC is not good
-*/
-
-extern int ZEXPORT unzReadCurrentFile OF((unzFile file,
- voidp buf,
- unsigned len));
-/*
- Read bytes from the current file (opened by unzOpenCurrentFile)
- buf contain buffer where data must be copied
- len the size of buf.
-
- return the number of byte copied if somes bytes are copied
- return 0 if the end of file was reached
- return <0 with error code if there is an error
- (UNZ_ERRNO for IO error, or zLib error for uncompress error)
-*/
-
-extern z_off_t ZEXPORT unztell OF((unzFile file));
-/*
- Give the current position in uncompressed data
-*/
-
-extern int ZEXPORT unzeof OF((unzFile file));
-/*
- return 1 if the end of file was reached, 0 elsewhere
-*/
-
-extern int ZEXPORT unzGetLocalExtrafield OF((unzFile file,
- voidp buf,
- unsigned len));
-/*
- Read extra field from the current file (opened by unzOpenCurrentFile)
- This is the local-header version of the extra field (sometimes, there is
- more info in the local-header version than in the central-header)
-
- if buf==NULL, it return the size of the local extra field
-
- if buf!=NULL, len is the size of the buffer, the extra header is copied in
- buf.
- the return value is the number of bytes copied in buf, or (if <0)
- the error code
-*/
-
-/***************************************************************************/
-
-/* Get the current file offset */
-extern uLong ZEXPORT unzGetOffset (unzFile file);
-
-/* Set the current file offset */
-extern int ZEXPORT unzSetOffset (unzFile file, uLong pos);
-
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* _unz_H */
diff --git a/src/zip.c b/src/zip.c deleted file mode 100644 index 762fcef..0000000 --- a/src/zip.c +++ /dev/null @@ -1,1218 +0,0 @@ -/* zip.c -- IO on .zip files using zlib
- Version 1.01e, February 12th, 2005
-
- 27 Dec 2004 Rolf Kalbermatter
- Modification to zipOpen2 to support globalComment retrieval.
-
- Copyright (C) 1998-2005 Gilles Vollant
-
- Read zip.h for more info
-*/
-
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <time.h>
-#include "zlib.h"
-#include "zip.h"
-
-#ifdef STDC
-# include <stddef.h>
-# include <string.h>
-# include <stdlib.h>
-#endif
-#ifdef NO_ERRNO_H
- extern int errno;
-#else
-# include <errno.h>
-#endif
-
-
-#ifndef local
-# define local static
-#endif
-/* compile with -Dlocal if your debugger can't find static symbols */
-
-#ifndef VERSIONMADEBY
-# define VERSIONMADEBY (0x0) /* platform depedent */
-#endif
-
-#ifndef Z_BUFSIZE
-#define Z_BUFSIZE (16384)
-#endif
-
-#ifndef Z_MAXFILENAMEINZIP
-#define Z_MAXFILENAMEINZIP (256)
-#endif
-
-#ifndef ALLOC
-# define ALLOC(size) (malloc(size))
-#endif
-#ifndef TRYFREE
-# define TRYFREE(p) {if (p) free(p);}
-#endif
-
-/*
-#define SIZECENTRALDIRITEM (0x2e)
-#define SIZEZIPLOCALHEADER (0x1e)
-*/
-
-/* I've found an old Unix (a SunOS 4.1.3_U1) without all SEEK_* defined.... */
-
-#ifndef SEEK_CUR
-#define SEEK_CUR 1
-#endif
-
-#ifndef SEEK_END
-#define SEEK_END 2
-#endif
-
-#ifndef SEEK_SET
-#define SEEK_SET 0
-#endif
-
-#ifndef DEF_MEM_LEVEL
-#if MAX_MEM_LEVEL >= 8
-# define DEF_MEM_LEVEL 8
-#else
-# define DEF_MEM_LEVEL MAX_MEM_LEVEL
-#endif
-#endif
-const char zip_copyright[] =
- " zip 1.01 Copyright 1998-2004 Gilles Vollant - http://www.winimage.com/zLibDll";
-
-
-#define SIZEDATA_INDATABLOCK (4096-(4*4))
-
-#define LOCALHEADERMAGIC (0x04034b50)
-#define CENTRALHEADERMAGIC (0x02014b50)
-#define ENDHEADERMAGIC (0x06054b50)
-
-#define FLAG_LOCALHEADER_OFFSET (0x06)
-#define CRC_LOCALHEADER_OFFSET (0x0e)
-
-#define SIZECENTRALHEADER (0x2e) /* 46 */
-
-typedef struct linkedlist_datablock_internal_s
-{
- struct linkedlist_datablock_internal_s* next_datablock;
- uLong avail_in_this_block;
- uLong filled_in_this_block;
- uLong unused; /* for future use and alignement */
- unsigned char data[SIZEDATA_INDATABLOCK];
-} linkedlist_datablock_internal;
-
-typedef struct linkedlist_data_s
-{
- linkedlist_datablock_internal* first_block;
- linkedlist_datablock_internal* last_block;
-} linkedlist_data;
-
-
-typedef struct
-{
- z_stream stream; /* zLib stream structure for inflate */
- int stream_initialised; /* 1 is stream is initialised */
- uInt pos_in_buffered_data; /* last written byte in buffered_data */
-
- uLong pos_local_header; /* offset of the local header of the file
- currenty writing */
- char* central_header; /* central header data for the current file */
- uLong size_centralheader; /* size of the central header for cur file */
- uLong flag; /* flag of the file currently writing */
-
- int method; /* compression method of file currenty wr.*/
- int raw; /* 1 for directly writing raw data */
- Byte buffered_data[Z_BUFSIZE];/* buffer contain compressed data to be writ*/
- uLong dosDate;
- uLong crc32;
- int encrypt;
-#ifndef NOCRYPT
- unsigned long keys[3]; /* keys defining the pseudo-random sequence */
- const unsigned long* pcrc_32_tab;
- int crypt_header_size;
-#endif
-} curfile_info;
-
-typedef struct
-{
- zlib_filefunc_def z_filefunc;
- voidpf filestream; /* io structore of the zipfile */
- linkedlist_data central_dir;/* datablock with central dir in construction*/
- int in_opened_file_inzip; /* 1 if a file in the zip is currently writ.*/
- curfile_info ci; /* info on the file curretly writing */
-
- uLong begin_pos; /* position of the beginning of the zipfile */
- uLong add_position_when_writting_offset;
- uLong number_entry;
-#ifndef NO_ADDFILEINEXISTINGZIP
- char *globalcomment;
-#endif
-} zip_internal;
-
-
-
-#ifndef NOCRYPT
-#define INCLUDECRYPTINGCODE_IFCRYPTALLOWED
-#include "crypt.h"
-#endif
-
-local linkedlist_datablock_internal* allocate_new_datablock()
-{
- linkedlist_datablock_internal* ldi;
- ldi = (linkedlist_datablock_internal*)
- ALLOC(sizeof(linkedlist_datablock_internal));
- if (ldi!=NULL)
- {
- ldi->next_datablock = NULL ;
- ldi->filled_in_this_block = 0 ;
- ldi->avail_in_this_block = SIZEDATA_INDATABLOCK ;
- }
- return ldi;
-}
-
-local void free_datablock(ldi)
- linkedlist_datablock_internal* ldi;
-{
- while (ldi!=NULL)
- {
- linkedlist_datablock_internal* ldinext = ldi->next_datablock;
- TRYFREE(ldi);
- ldi = ldinext;
- }
-}
-
-local void init_linkedlist(ll)
- linkedlist_data* ll;
-{
- ll->first_block = ll->last_block = NULL;
-}
-
-local void free_linkedlist(ll)
- linkedlist_data* ll;
-{
- free_datablock(ll->first_block);
- ll->first_block = ll->last_block = NULL;
-}
-
-
-local int add_data_in_datablock(ll,buf,len)
- linkedlist_data* ll;
- const void* buf;
- uLong len;
-{
- linkedlist_datablock_internal* ldi;
- const unsigned char* from_copy;
-
- if (ll==NULL)
- return ZIP_INTERNALERROR;
-
- if (ll->last_block == NULL)
- {
- ll->first_block = ll->last_block = allocate_new_datablock();
- if (ll->first_block == NULL)
- return ZIP_INTERNALERROR;
- }
-
- ldi = ll->last_block;
- from_copy = (unsigned char*)buf;
-
- while (len>0)
- {
- uInt copy_this;
- uInt i;
- unsigned char* to_copy;
-
- if (ldi->avail_in_this_block==0)
- {
- ldi->next_datablock = allocate_new_datablock();
- if (ldi->next_datablock == NULL)
- return ZIP_INTERNALERROR;
- ldi = ldi->next_datablock ;
- ll->last_block = ldi;
- }
-
- if (ldi->avail_in_this_block < len)
- copy_this = (uInt)ldi->avail_in_this_block;
- else
- copy_this = (uInt)len;
-
- to_copy = &(ldi->data[ldi->filled_in_this_block]);
-
- for (i=0;i<copy_this;i++)
- *(to_copy+i)=*(from_copy+i);
-
- ldi->filled_in_this_block += copy_this;
- ldi->avail_in_this_block -= copy_this;
- from_copy += copy_this ;
- len -= copy_this;
- }
- return ZIP_OK;
-}
-
-
-
-/****************************************************************************/
-
-#ifndef NO_ADDFILEINEXISTINGZIP
-/* ===========================================================================
- Inputs a long in LSB order to the given file
- nbByte == 1, 2 or 4 (byte, short or long)
-*/
-
-local int ziplocal_putValue OF((const zlib_filefunc_def* pzlib_filefunc_def,
- voidpf filestream, uLong x, int nbByte));
-local int ziplocal_putValue (pzlib_filefunc_def, filestream, x, nbByte)
- const zlib_filefunc_def* pzlib_filefunc_def;
- voidpf filestream;
- uLong x;
- int nbByte;
-{
- unsigned char buf[4];
- int n;
- for (n = 0; n < nbByte; n++)
- {
- buf[n] = (unsigned char)(x & 0xff);
- x >>= 8;
- }
- if (x != 0)
- { /* data overflow - hack for ZIP64 (X Roche) */
- for (n = 0; n < nbByte; n++)
- {
- buf[n] = 0xff;
- }
- }
-
- if (ZWRITE(*pzlib_filefunc_def,filestream,buf,nbByte)!=(uLong)nbByte)
- return ZIP_ERRNO;
- else
- return ZIP_OK;
-}
-
-local void ziplocal_putValue_inmemory OF((void* dest, uLong x, int nbByte));
-local void ziplocal_putValue_inmemory (dest, x, nbByte)
- void* dest;
- uLong x;
- int nbByte;
-{
- unsigned char* buf=(unsigned char*)dest;
- int n;
- for (n = 0; n < nbByte; n++) {
- buf[n] = (unsigned char)(x & 0xff);
- x >>= 8;
- }
-
- if (x != 0)
- { /* data overflow - hack for ZIP64 */
- for (n = 0; n < nbByte; n++)
- {
- buf[n] = 0xff;
- }
- }
-}
-
-/****************************************************************************/
-
-
-local uLong ziplocal_TmzDateToDosDate(ptm,dosDate)
- const tm_zip* ptm;
- uLong dosDate;
-{
- uLong year = (uLong)ptm->tm_year;
- if (year>1980)
- year-=1980;
- else if (year>80)
- year-=80;
- return
- (uLong) (((ptm->tm_mday) + (32 * (ptm->tm_mon+1)) + (512 * year)) << 16) |
- ((ptm->tm_sec/2) + (32* ptm->tm_min) + (2048 * (uLong)ptm->tm_hour));
-}
-
-
-/****************************************************************************/
-
-local int ziplocal_getByte OF((
- const zlib_filefunc_def* pzlib_filefunc_def,
- voidpf filestream,
- int *pi));
-
-local int ziplocal_getByte(pzlib_filefunc_def,filestream,pi)
- const zlib_filefunc_def* pzlib_filefunc_def;
- voidpf filestream;
- int *pi;
-{
- unsigned char c;
- int err = (int)ZREAD(*pzlib_filefunc_def,filestream,&c,1);
- if (err==1)
- {
- *pi = (int)c;
- return ZIP_OK;
- }
- else
- {
- if (ZERROR(*pzlib_filefunc_def,filestream))
- return ZIP_ERRNO;
- else
- return ZIP_EOF;
- }
-}
-
-
-/* ===========================================================================
- Reads a long in LSB order from the given gz_stream. Sets
-*/
-local int ziplocal_getShort OF((
- const zlib_filefunc_def* pzlib_filefunc_def,
- voidpf filestream,
- uLong *pX));
-
-local int ziplocal_getShort (pzlib_filefunc_def,filestream,pX)
- const zlib_filefunc_def* pzlib_filefunc_def;
- voidpf filestream;
- uLong *pX;
-{
- uLong x ;
- int i;
- int err;
-
- err = ziplocal_getByte(pzlib_filefunc_def,filestream,&i);
- x = (uLong)i;
-
- if (err==ZIP_OK)
- err = ziplocal_getByte(pzlib_filefunc_def,filestream,&i);
- x += ((uLong)i)<<8;
-
- if (err==ZIP_OK)
- *pX = x;
- else
- *pX = 0;
- return err;
-}
-
-local int ziplocal_getLong OF((
- const zlib_filefunc_def* pzlib_filefunc_def,
- voidpf filestream,
- uLong *pX));
-
-local int ziplocal_getLong (pzlib_filefunc_def,filestream,pX)
- const zlib_filefunc_def* pzlib_filefunc_def;
- voidpf filestream;
- uLong *pX;
-{
- uLong x ;
- int i;
- int err;
-
- err = ziplocal_getByte(pzlib_filefunc_def,filestream,&i);
- x = (uLong)i;
-
- if (err==ZIP_OK)
- err = ziplocal_getByte(pzlib_filefunc_def,filestream,&i);
- x += ((uLong)i)<<8;
-
- if (err==ZIP_OK)
- err = ziplocal_getByte(pzlib_filefunc_def,filestream,&i);
- x += ((uLong)i)<<16;
-
- if (err==ZIP_OK)
- err = ziplocal_getByte(pzlib_filefunc_def,filestream,&i);
- x += ((uLong)i)<<24;
-
- if (err==ZIP_OK)
- *pX = x;
- else
- *pX = 0;
- return err;
-}
-
-#ifndef BUFREADCOMMENT
-#define BUFREADCOMMENT (0x400)
-#endif
-/*
- Locate the Central directory of a zipfile (at the end, just before
- the global comment)
-*/
-local uLong ziplocal_SearchCentralDir OF((
- const zlib_filefunc_def* pzlib_filefunc_def,
- voidpf filestream));
-
-local uLong ziplocal_SearchCentralDir(pzlib_filefunc_def,filestream)
- const zlib_filefunc_def* pzlib_filefunc_def;
- voidpf filestream;
-{
- unsigned char* buf;
- uLong uSizeFile;
- uLong uBackRead;
- uLong uMaxBack=0xffff; /* maximum size of global comment */
- uLong uPosFound=0;
-
- if (ZSEEK(*pzlib_filefunc_def,filestream,0,ZLIB_FILEFUNC_SEEK_END) != 0)
- return 0;
-
-
- uSizeFile = ZTELL(*pzlib_filefunc_def,filestream);
-
- if (uMaxBack>uSizeFile)
- uMaxBack = uSizeFile;
-
- buf = (unsigned char*)ALLOC(BUFREADCOMMENT+4);
- if (buf==NULL)
- return 0;
-
- uBackRead = 4;
- while (uBackRead<uMaxBack)
- {
- uLong uReadSize,uReadPos ;
- int i;
- if (uBackRead+BUFREADCOMMENT>uMaxBack)
- uBackRead = uMaxBack;
- else
- uBackRead+=BUFREADCOMMENT;
- uReadPos = uSizeFile-uBackRead ;
-
- uReadSize = ((BUFREADCOMMENT+4) < (uSizeFile-uReadPos)) ?
- (BUFREADCOMMENT+4) : (uSizeFile-uReadPos);
- if (ZSEEK(*pzlib_filefunc_def,filestream,uReadPos,ZLIB_FILEFUNC_SEEK_SET)!=0)
- break;
-
- if (ZREAD(*pzlib_filefunc_def,filestream,buf,uReadSize)!=uReadSize)
- break;
-
- for (i=(int)uReadSize-3; (i--)>0;)
- if (((*(buf+i))==0x50) && ((*(buf+i+1))==0x4b) &&
- ((*(buf+i+2))==0x05) && ((*(buf+i+3))==0x06))
- {
- uPosFound = uReadPos+i;
- break;
- }
-
- if (uPosFound!=0)
- break;
- }
- TRYFREE(buf);
- return uPosFound;
-}
-#endif /* !NO_ADDFILEINEXISTINGZIP*/
-
-/************************************************************/
-extern zipFile ZEXPORT zipOpen2 (pathname, append, globalcomment, pzlib_filefunc_def)
- const char *pathname;
- int append;
- zipcharpc* globalcomment;
- zlib_filefunc_def* pzlib_filefunc_def;
-{
- zip_internal ziinit;
- zip_internal* zi;
- int err=ZIP_OK;
-
-
- if (pzlib_filefunc_def==NULL)
- fill_fopen_filefunc(&ziinit.z_filefunc);
- else
- ziinit.z_filefunc = *pzlib_filefunc_def;
-
- ziinit.filestream = (*(ziinit.z_filefunc.zopen_file))
- (ziinit.z_filefunc.opaque,
- pathname,
- (append == APPEND_STATUS_CREATE) ?
- (ZLIB_FILEFUNC_MODE_READ | ZLIB_FILEFUNC_MODE_WRITE | ZLIB_FILEFUNC_MODE_CREATE) :
- (ZLIB_FILEFUNC_MODE_READ | ZLIB_FILEFUNC_MODE_WRITE | ZLIB_FILEFUNC_MODE_EXISTING));
-
- if (ziinit.filestream == NULL)
- return NULL;
- ziinit.begin_pos = ZTELL(ziinit.z_filefunc,ziinit.filestream);
- ziinit.in_opened_file_inzip = 0;
- ziinit.ci.stream_initialised = 0;
- ziinit.number_entry = 0;
- ziinit.add_position_when_writting_offset = 0;
- init_linkedlist(&(ziinit.central_dir));
-
-
- zi = (zip_internal*)ALLOC(sizeof(zip_internal));
- if (zi==NULL)
- {
- ZCLOSE(ziinit.z_filefunc,ziinit.filestream);
- return NULL;
- }
-
- /* now we add file in a zipfile */
-# ifndef NO_ADDFILEINEXISTINGZIP
- ziinit.globalcomment = NULL;
- if (append == APPEND_STATUS_ADDINZIP)
- {
- uLong byte_before_the_zipfile;/* byte before the zipfile, (>0 for sfx)*/
-
- uLong size_central_dir; /* size of the central directory */
- uLong offset_central_dir; /* offset of start of central directory */
- uLong central_pos,uL;
-
- uLong number_disk; /* number of the current dist, used for
- spaning ZIP, unsupported, always 0*/
- uLong number_disk_with_CD; /* number the the disk with central dir, used
- for spaning ZIP, unsupported, always 0*/
- uLong number_entry;
- uLong number_entry_CD; /* total number of entries in
- the central dir
- (same than number_entry on nospan) */
- uLong size_comment;
-
- central_pos = ziplocal_SearchCentralDir(&ziinit.z_filefunc,ziinit.filestream);
- if (central_pos==0)
- err=ZIP_ERRNO;
-
- if (ZSEEK(ziinit.z_filefunc, ziinit.filestream,
- central_pos,ZLIB_FILEFUNC_SEEK_SET)!=0)
- err=ZIP_ERRNO;
-
- /* the signature, already checked */
- if (ziplocal_getLong(&ziinit.z_filefunc, ziinit.filestream,&uL)!=ZIP_OK)
- err=ZIP_ERRNO;
-
- /* number of this disk */
- if (ziplocal_getShort(&ziinit.z_filefunc, ziinit.filestream,&number_disk)!=ZIP_OK)
- err=ZIP_ERRNO;
-
- /* number of the disk with the start of the central directory */
- if (ziplocal_getShort(&ziinit.z_filefunc, ziinit.filestream,&number_disk_with_CD)!=ZIP_OK)
- err=ZIP_ERRNO;
-
- /* total number of entries in the central dir on this disk */
- if (ziplocal_getShort(&ziinit.z_filefunc, ziinit.filestream,&number_entry)!=ZIP_OK)
- err=ZIP_ERRNO;
-
- /* total number of entries in the central dir */
- if (ziplocal_getShort(&ziinit.z_filefunc, ziinit.filestream,&number_entry_CD)!=ZIP_OK)
- err=ZIP_ERRNO;
-
- if ((number_entry_CD!=number_entry) ||
- (number_disk_with_CD!=0) ||
- (number_disk!=0))
- err=ZIP_BADZIPFILE;
-
- /* size of the central directory */
- if (ziplocal_getLong(&ziinit.z_filefunc, ziinit.filestream,&size_central_dir)!=ZIP_OK)
- err=ZIP_ERRNO;
-
- /* offset of start of central directory with respect to the
- starting disk number */
- if (ziplocal_getLong(&ziinit.z_filefunc, ziinit.filestream,&offset_central_dir)!=ZIP_OK)
- err=ZIP_ERRNO;
-
- /* zipfile global comment length */
- if (ziplocal_getShort(&ziinit.z_filefunc, ziinit.filestream,&size_comment)!=ZIP_OK)
- err=ZIP_ERRNO;
-
- if ((central_pos<offset_central_dir+size_central_dir) &&
- (err==ZIP_OK))
- err=ZIP_BADZIPFILE;
-
- if (err!=ZIP_OK)
- {
- ZCLOSE(ziinit.z_filefunc, ziinit.filestream);
- return NULL;
- }
-
- if (size_comment>0)
- {
- ziinit.globalcomment = ALLOC(size_comment+1);
- if (ziinit.globalcomment)
- {
- size_comment = ZREAD(ziinit.z_filefunc, ziinit.filestream,ziinit.globalcomment,size_comment);
- ziinit.globalcomment[size_comment]=0;
- }
- }
-
- byte_before_the_zipfile = central_pos -
- (offset_central_dir+size_central_dir);
- ziinit.add_position_when_writting_offset = byte_before_the_zipfile ;
-
- {
- uLong size_central_dir_to_read = size_central_dir;
- size_t buf_size = SIZEDATA_INDATABLOCK;
- void* buf_read = (void*)ALLOC(buf_size);
- if (ZSEEK(ziinit.z_filefunc, ziinit.filestream,
- offset_central_dir + byte_before_the_zipfile,
- ZLIB_FILEFUNC_SEEK_SET) != 0)
- err=ZIP_ERRNO;
-
- while ((size_central_dir_to_read>0) && (err==ZIP_OK))
- {
- uLong read_this = SIZEDATA_INDATABLOCK;
- if (read_this > size_central_dir_to_read)
- read_this = size_central_dir_to_read;
- if (ZREAD(ziinit.z_filefunc, ziinit.filestream,buf_read,read_this) != read_this)
- err=ZIP_ERRNO;
-
- if (err==ZIP_OK)
- err = add_data_in_datablock(&ziinit.central_dir,buf_read,
- (uLong)read_this);
- size_central_dir_to_read-=read_this;
- }
- TRYFREE(buf_read);
- }
- ziinit.begin_pos = byte_before_the_zipfile;
- ziinit.number_entry = number_entry_CD;
-
- if (ZSEEK(ziinit.z_filefunc, ziinit.filestream,
- offset_central_dir+byte_before_the_zipfile,ZLIB_FILEFUNC_SEEK_SET)!=0)
- err=ZIP_ERRNO;
- }
-
- if (globalcomment)
- {
- *globalcomment = ziinit.globalcomment;
- }
-# endif /* !NO_ADDFILEINEXISTINGZIP*/
-
- if (err != ZIP_OK)
- {
-# ifndef NO_ADDFILEINEXISTINGZIP
- TRYFREE(ziinit.globalcomment);
-# endif /* !NO_ADDFILEINEXISTINGZIP*/
- TRYFREE(zi);
- return NULL;
- }
- else
- {
- *zi = ziinit;
- return (zipFile)zi;
- }
-}
-
-extern zipFile ZEXPORT zipOpen (pathname, append)
- const char *pathname;
- int append;
-{
- return zipOpen2(pathname,append,NULL,NULL);
-}
-
-extern int ZEXPORT zipOpenNewFileInZip3 (file, filename, zipfi,
- extrafield_local, size_extrafield_local,
- extrafield_global, size_extrafield_global,
- comment, method, level, raw,
- windowBits, memLevel, strategy,
- password, crcForCrypting)
- zipFile file;
- const char* filename;
- const zip_fileinfo* zipfi;
- const void* extrafield_local;
- uInt size_extrafield_local;
- const void* extrafield_global;
- uInt size_extrafield_global;
- const char* comment;
- int method;
- int level;
- int raw;
- int windowBits;
- int memLevel;
- int strategy;
- const char* password;
- uLong crcForCrypting;
-{
- zip_internal* zi;
- uInt size_filename;
- uInt size_comment;
- uInt i;
- int err = ZIP_OK;
-
-# ifdef NOCRYPT
- if (password != NULL)
- return ZIP_PARAMERROR;
-# endif
-
- if (file == NULL)
- return ZIP_PARAMERROR;
- if ((method!=0) && (method!=Z_DEFLATED))
- return ZIP_PARAMERROR;
-
- zi = (zip_internal*)file;
-
- if (zi->in_opened_file_inzip == 1)
- {
- err = zipCloseFileInZip (file);
- if (err != ZIP_OK)
- return err;
- }
-
-
- if (filename==NULL)
- filename="-";
-
- if (comment==NULL)
- size_comment = 0;
- else
- size_comment = (uInt)strlen(comment);
-
- size_filename = (uInt)strlen(filename);
-
- if (zipfi == NULL)
- zi->ci.dosDate = 0;
- else
- {
- if (zipfi->dosDate != 0)
- zi->ci.dosDate = zipfi->dosDate;
- else zi->ci.dosDate = ziplocal_TmzDateToDosDate(&zipfi->tmz_date,zipfi->dosDate);
- }
-
- zi->ci.flag = 0;
- if ((level==8) || (level==9))
- zi->ci.flag |= 2;
- if ((level==2))
- zi->ci.flag |= 4;
- if ((level==1))
- zi->ci.flag |= 6;
- if (password != NULL)
- zi->ci.flag |= 1;
-
- zi->ci.crc32 = 0;
- zi->ci.method = method;
- zi->ci.encrypt = 0;
- zi->ci.stream_initialised = 0;
- zi->ci.pos_in_buffered_data = 0;
- zi->ci.raw = raw;
- zi->ci.pos_local_header = ZTELL(zi->z_filefunc,zi->filestream) ;
- zi->ci.size_centralheader = SIZECENTRALHEADER + size_filename +
- size_extrafield_global + size_comment;
- zi->ci.central_header = (char*)ALLOC((uInt)zi->ci.size_centralheader);
-
- ziplocal_putValue_inmemory(zi->ci.central_header,(uLong)CENTRALHEADERMAGIC,4);
- /* version info */
- ziplocal_putValue_inmemory(zi->ci.central_header+4,(uLong)VERSIONMADEBY,2);
- ziplocal_putValue_inmemory(zi->ci.central_header+6,(uLong)20,2);
- ziplocal_putValue_inmemory(zi->ci.central_header+8,(uLong)zi->ci.flag,2);
- ziplocal_putValue_inmemory(zi->ci.central_header+10,(uLong)zi->ci.method,2);
- ziplocal_putValue_inmemory(zi->ci.central_header+12,(uLong)zi->ci.dosDate,4);
- ziplocal_putValue_inmemory(zi->ci.central_header+16,(uLong)0,4); /*crc*/
- ziplocal_putValue_inmemory(zi->ci.central_header+20,(uLong)0,4); /*compr size*/
- ziplocal_putValue_inmemory(zi->ci.central_header+24,(uLong)0,4); /*uncompr size*/
- ziplocal_putValue_inmemory(zi->ci.central_header+28,(uLong)size_filename,2);
- ziplocal_putValue_inmemory(zi->ci.central_header+30,(uLong)size_extrafield_global,2);
- ziplocal_putValue_inmemory(zi->ci.central_header+32,(uLong)size_comment,2);
- ziplocal_putValue_inmemory(zi->ci.central_header+34,(uLong)0,2); /*disk nm start*/
-
- if (zipfi==NULL)
- ziplocal_putValue_inmemory(zi->ci.central_header+36,(uLong)0,2);
- else
- ziplocal_putValue_inmemory(zi->ci.central_header+36,(uLong)zipfi->internal_fa,2);
-
- if (zipfi==NULL)
- ziplocal_putValue_inmemory(zi->ci.central_header+38,(uLong)0,4);
- else
- ziplocal_putValue_inmemory(zi->ci.central_header+38,(uLong)zipfi->external_fa,4);
-
- ziplocal_putValue_inmemory(zi->ci.central_header+42,(uLong)zi->ci.pos_local_header- zi->add_position_when_writting_offset,4);
-
- for (i=0;i<size_filename;i++)
- *(zi->ci.central_header+SIZECENTRALHEADER+i) = *(filename+i);
-
- for (i=0;i<size_extrafield_global;i++)
- *(zi->ci.central_header+SIZECENTRALHEADER+size_filename+i) =
- *(((const char*)extrafield_global)+i);
-
- for (i=0;i<size_comment;i++)
- *(zi->ci.central_header+SIZECENTRALHEADER+size_filename+
- size_extrafield_global+i) = *(comment+i);
- if (zi->ci.central_header == NULL)
- return ZIP_INTERNALERROR;
-
-
- /* write the local header */
- err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)LOCALHEADERMAGIC,4);
-
- if (err==ZIP_OK)
- err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)20,2);/* version needed to extract */
- if (err==ZIP_OK)
- err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)zi->ci.flag,2);
-
- if (err==ZIP_OK)
- err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)zi->ci.method,2);
-
- if (err==ZIP_OK)
- err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)zi->ci.dosDate,4);
-
- if (err==ZIP_OK)
- err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,4); /* crc 32, unknown */
- if (err==ZIP_OK)
- err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,4); /* compressed size, unknown */
- if (err==ZIP_OK)
- err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,4); /* uncompressed size, unknown */
-
- if (err==ZIP_OK)
- err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)size_filename,2);
-
- if (err==ZIP_OK)
- err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)size_extrafield_local,2);
-
- if ((err==ZIP_OK) && (size_filename>0))
- if (ZWRITE(zi->z_filefunc,zi->filestream,filename,size_filename)!=size_filename)
- err = ZIP_ERRNO;
-
- if ((err==ZIP_OK) && (size_extrafield_local>0))
- if (ZWRITE(zi->z_filefunc,zi->filestream,extrafield_local,size_extrafield_local)
- !=size_extrafield_local)
- err = ZIP_ERRNO;
-
- zi->ci.stream.avail_in = (uInt)0;
- zi->ci.stream.avail_out = (uInt)Z_BUFSIZE;
- zi->ci.stream.next_out = zi->ci.buffered_data;
- zi->ci.stream.total_in = 0;
- zi->ci.stream.total_out = 0;
-
- if ((err==ZIP_OK) && (zi->ci.method == Z_DEFLATED) && (!zi->ci.raw))
- {
- zi->ci.stream.zalloc = (alloc_func)0;
- zi->ci.stream.zfree = (free_func)0;
- zi->ci.stream.opaque = (voidpf)0;
-
- if (windowBits>0)
- windowBits = -windowBits;
-
- err = deflateInit2(&zi->ci.stream, level,
- Z_DEFLATED, windowBits, memLevel, strategy);
-
- if (err==Z_OK)
- zi->ci.stream_initialised = 1;
- }
-# ifndef NOCRYPT
- zi->ci.crypt_header_size = 0;
- if ((err==Z_OK) && (password != NULL))
- {
- unsigned char bufHead[RAND_HEAD_LEN];
- unsigned int sizeHead;
- zi->ci.encrypt = 1;
- zi->ci.pcrc_32_tab = get_crc_table();
- /*init_keys(password,zi->ci.keys,zi->ci.pcrc_32_tab);*/
-
- sizeHead=crypthead(password,bufHead,RAND_HEAD_LEN,zi->ci.keys,zi->ci.pcrc_32_tab,crcForCrypting);
- zi->ci.crypt_header_size = sizeHead;
-
- if (ZWRITE(zi->z_filefunc,zi->filestream,bufHead,sizeHead) != sizeHead)
- err = ZIP_ERRNO;
- }
-# endif
-
- if (err==Z_OK)
- zi->in_opened_file_inzip = 1;
- return err;
-}
-
-extern int ZEXPORT zipOpenNewFileInZip2(file, filename, zipfi,
- extrafield_local, size_extrafield_local,
- extrafield_global, size_extrafield_global,
- comment, method, level, raw)
- zipFile file;
- const char* filename;
- const zip_fileinfo* zipfi;
- const void* extrafield_local;
- uInt size_extrafield_local;
- const void* extrafield_global;
- uInt size_extrafield_global;
- const char* comment;
- int method;
- int level;
- int raw;
-{
- return zipOpenNewFileInZip3 (file, filename, zipfi,
- extrafield_local, size_extrafield_local,
- extrafield_global, size_extrafield_global,
- comment, method, level, raw,
- -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY,
- NULL, 0);
-}
-
-extern int ZEXPORT zipOpenNewFileInZip (file, filename, zipfi,
- extrafield_local, size_extrafield_local,
- extrafield_global, size_extrafield_global,
- comment, method, level)
- zipFile file;
- const char* filename;
- const zip_fileinfo* zipfi;
- const void* extrafield_local;
- uInt size_extrafield_local;
- const void* extrafield_global;
- uInt size_extrafield_global;
- const char* comment;
- int method;
- int level;
-{
- return zipOpenNewFileInZip2 (file, filename, zipfi,
- extrafield_local, size_extrafield_local,
- extrafield_global, size_extrafield_global,
- comment, method, level, 0);
-}
-
-local int zipFlushWriteBuffer(zi)
- zip_internal* zi;
-{
- int err=ZIP_OK;
-
- if (zi->ci.encrypt != 0)
- {
-#ifndef NOCRYPT
- uInt i;
- int t;
- for (i=0;i<zi->ci.pos_in_buffered_data;i++)
- zi->ci.buffered_data[i] = zencode(zi->ci.keys, zi->ci.pcrc_32_tab,
- zi->ci.buffered_data[i],t);
-#endif
- }
- if (ZWRITE(zi->z_filefunc,zi->filestream,zi->ci.buffered_data,zi->ci.pos_in_buffered_data)
- !=zi->ci.pos_in_buffered_data)
- err = ZIP_ERRNO;
- zi->ci.pos_in_buffered_data = 0;
- return err;
-}
-
-extern int ZEXPORT zipWriteInFileInZip (file, buf, len)
- zipFile file;
- const void* buf;
- unsigned len;
-{
- zip_internal* zi;
- int err=ZIP_OK;
-
- if (file == NULL)
- return ZIP_PARAMERROR;
- zi = (zip_internal*)file;
-
- if (zi->in_opened_file_inzip == 0)
- return ZIP_PARAMERROR;
-
- zi->ci.stream.next_in = (void*)buf;
- zi->ci.stream.avail_in = len;
- zi->ci.crc32 = crc32(zi->ci.crc32,buf,len);
-
- while ((err==ZIP_OK) && (zi->ci.stream.avail_in>0))
- {
- if (zi->ci.stream.avail_out == 0)
- {
- if (zipFlushWriteBuffer(zi) == ZIP_ERRNO)
- err = ZIP_ERRNO;
- zi->ci.stream.avail_out = (uInt)Z_BUFSIZE;
- zi->ci.stream.next_out = zi->ci.buffered_data;
- }
-
-
- if(err != ZIP_OK)
- break;
-
- if ((zi->ci.method == Z_DEFLATED) && (!zi->ci.raw))
- {
- uLong uTotalOutBefore = zi->ci.stream.total_out;
- err=deflate(&zi->ci.stream, Z_NO_FLUSH);
- zi->ci.pos_in_buffered_data += (uInt)(zi->ci.stream.total_out - uTotalOutBefore) ;
-
- }
- else
- {
- uInt copy_this,i;
- if (zi->ci.stream.avail_in < zi->ci.stream.avail_out)
- copy_this = zi->ci.stream.avail_in;
- else
- copy_this = zi->ci.stream.avail_out;
- for (i=0;i<copy_this;i++)
- *(((char*)zi->ci.stream.next_out)+i) =
- *(((const char*)zi->ci.stream.next_in)+i);
- {
- zi->ci.stream.avail_in -= copy_this;
- zi->ci.stream.avail_out-= copy_this;
- zi->ci.stream.next_in+= copy_this;
- zi->ci.stream.next_out+= copy_this;
- zi->ci.stream.total_in+= copy_this;
- zi->ci.stream.total_out+= copy_this;
- zi->ci.pos_in_buffered_data += copy_this;
- }
- }
- }
- return err;
-}
-
-extern int ZEXPORT zipCloseFileInZipRaw (file, uncompressed_size, crc32)
- zipFile file;
- uLong uncompressed_size;
- uLong crc32;
-{
- zip_internal* zi;
- uLong compressed_size;
- int err=ZIP_OK;
- if (file == NULL)
- return ZIP_PARAMERROR;
- zi = (zip_internal*)file;
-
- if (zi->in_opened_file_inzip == 0)
- return ZIP_PARAMERROR;
- zi->ci.stream.avail_in = 0;
-
- if ((zi->ci.method == Z_DEFLATED) && (!zi->ci.raw))
- while (err==ZIP_OK)
- {
- uLong uTotalOutBefore;
- if (zi->ci.stream.avail_out == 0)
- {
- if (zipFlushWriteBuffer(zi) == ZIP_ERRNO)
- err = ZIP_ERRNO;
- zi->ci.stream.avail_out = (uInt)Z_BUFSIZE;
- zi->ci.stream.next_out = zi->ci.buffered_data;
- }
- uTotalOutBefore = zi->ci.stream.total_out;
- err=deflate(&zi->ci.stream, Z_FINISH);
- zi->ci.pos_in_buffered_data += (uInt)(zi->ci.stream.total_out - uTotalOutBefore) ;
- }
-
- if (err==Z_STREAM_END)
- err=ZIP_OK; /* this is normal */
-
- if ((zi->ci.pos_in_buffered_data>0) && (err==ZIP_OK))
- if (zipFlushWriteBuffer(zi)==ZIP_ERRNO)
- err = ZIP_ERRNO;
-
- if ((zi->ci.method == Z_DEFLATED) && (!zi->ci.raw))
- {
- err=deflateEnd(&zi->ci.stream);
- zi->ci.stream_initialised = 0;
- }
-
- if (!zi->ci.raw)
- {
- crc32 = (uLong)zi->ci.crc32;
- uncompressed_size = (uLong)zi->ci.stream.total_in;
- }
- compressed_size = (uLong)zi->ci.stream.total_out;
-# ifndef NOCRYPT
- compressed_size += zi->ci.crypt_header_size;
-# endif
-
- ziplocal_putValue_inmemory(zi->ci.central_header+16,crc32,4); /*crc*/
- ziplocal_putValue_inmemory(zi->ci.central_header+20,
- compressed_size,4); /*compr size*/
- if (zi->ci.stream.data_type == Z_ASCII)
- ziplocal_putValue_inmemory(zi->ci.central_header+36,(uLong)Z_ASCII,2);
- ziplocal_putValue_inmemory(zi->ci.central_header+24,
- uncompressed_size,4); /*uncompr size*/
-
- if (err==ZIP_OK)
- err = add_data_in_datablock(&zi->central_dir,zi->ci.central_header,
- (uLong)zi->ci.size_centralheader);
- free(zi->ci.central_header);
-
- if (err==ZIP_OK)
- {
- long cur_pos_inzip = ZTELL(zi->z_filefunc,zi->filestream);
- if (ZSEEK(zi->z_filefunc,zi->filestream,
- zi->ci.pos_local_header + 14,ZLIB_FILEFUNC_SEEK_SET)!=0)
- err = ZIP_ERRNO;
-
- if (err==ZIP_OK)
- err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,crc32,4); /* crc 32, unknown */
-
- if (err==ZIP_OK) /* compressed size, unknown */
- err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,compressed_size,4);
-
- if (err==ZIP_OK) /* uncompressed size, unknown */
- err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,uncompressed_size,4);
-
- if (ZSEEK(zi->z_filefunc,zi->filestream,
- cur_pos_inzip,ZLIB_FILEFUNC_SEEK_SET)!=0)
- err = ZIP_ERRNO;
- }
-
- zi->number_entry ++;
- zi->in_opened_file_inzip = 0;
-
- return err;
-}
-
-extern int ZEXPORT zipCloseFileInZip (file)
- zipFile file;
-{
- return zipCloseFileInZipRaw (file,0,0);
-}
-
-extern int ZEXPORT zipClose (file, global_comment)
- zipFile file;
- const char* global_comment;
-{
- zip_internal* zi;
- int err = 0;
- uLong size_centraldir = 0;
- uLong centraldir_pos_inzip ;
- uInt size_global_comment;
- if (file == NULL)
- return ZIP_PARAMERROR;
- zi = (zip_internal*)file;
-
- if (zi->in_opened_file_inzip == 1)
- {
- err = zipCloseFileInZip (file);
- }
-
-#ifndef NO_ADDFILEINEXISTINGZIP
- if (global_comment==NULL)
- global_comment = zi->globalcomment;
-#endif
- if (global_comment==NULL)
- size_global_comment = 0;
- else
- size_global_comment = (uInt)strlen(global_comment);
-
- centraldir_pos_inzip = ZTELL(zi->z_filefunc,zi->filestream);
- if (err==ZIP_OK)
- {
- linkedlist_datablock_internal* ldi = zi->central_dir.first_block ;
- while (ldi!=NULL)
- {
- if ((err==ZIP_OK) && (ldi->filled_in_this_block>0))
- if (ZWRITE(zi->z_filefunc,zi->filestream,
- ldi->data,ldi->filled_in_this_block)
- !=ldi->filled_in_this_block )
- err = ZIP_ERRNO;
-
- size_centraldir += ldi->filled_in_this_block;
- ldi = ldi->next_datablock;
- }
- }
- free_datablock(zi->central_dir.first_block);
-
- if (err==ZIP_OK) /* Magic End */
- err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)ENDHEADERMAGIC,4);
-
- if (err==ZIP_OK) /* number of this disk */
- err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,2);
-
- if (err==ZIP_OK) /* number of the disk with the start of the central directory */
- err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,2);
-
- if (err==ZIP_OK) /* total number of entries in the central dir on this disk */
- err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)zi->number_entry,2);
-
- if (err==ZIP_OK) /* total number of entries in the central dir */
- err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)zi->number_entry,2);
-
- if (err==ZIP_OK) /* size of the central directory */
- err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)size_centraldir,4);
-
- if (err==ZIP_OK) /* offset of start of central directory with respect to the
- starting disk number */
- err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,
- (uLong)(centraldir_pos_inzip - zi->add_position_when_writting_offset),4);
-
- if (err==ZIP_OK) /* zipfile comment length */
- err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)size_global_comment,2);
-
- if ((err==ZIP_OK) && (size_global_comment>0))
- if (ZWRITE(zi->z_filefunc,zi->filestream,
- global_comment,size_global_comment) != size_global_comment)
- err = ZIP_ERRNO;
-
- if (ZCLOSE(zi->z_filefunc,zi->filestream) != 0)
- if (err == ZIP_OK)
- err = ZIP_ERRNO;
-
-#ifndef NO_ADDFILEINEXISTINGZIP
- TRYFREE(zi->globalcomment);
-#endif
- TRYFREE(zi);
-
- return err;
-}
diff --git a/src/zip.h b/src/zip.h deleted file mode 100644 index 5fee09b..0000000 --- a/src/zip.h +++ /dev/null @@ -1,237 +0,0 @@ -/* zip.h -- IO for compress .zip files using zlib
- Version 1.01e, February 12th, 2005
-
- Copyright (C) 1998-2005 Gilles Vollant
-
- This unzip package allow creates .ZIP file, compatible with PKZip 2.04g
- WinZip, InfoZip tools and compatible.
- Multi volume ZipFile (span) are not supported.
- Encryption compatible with pkzip 2.04g only supported
- Old compressions used by old PKZip 1.x are not supported
-
- For uncompress .zip file, look at unzip.h
-
-
- I WAIT FEEDBACK at mail info@winimage.com
- Visit also http://www.winimage.com/zLibDll/unzip.html for evolution
-
- Condition of use and distribution are the same than zlib :
-
- This software is provided 'as-is', without any express or implied
- warranty. In no event will the authors be held liable for any damages
- arising from the use of this software.
-
- Permission is granted to anyone to use this software for any purpose,
- including commercial applications, and to alter it and redistribute it
- freely, subject to the following restrictions:
-
- 1. The origin of this software must not be misrepresented; you must not
- claim that you wrote the original software. If you use this software
- in a product, an acknowledgment in the product documentation would be
- appreciated but is not required.
- 2. Altered source versions must be plainly marked as such, and must not be
- misrepresented as being the original software.
- 3. This notice may not be removed or altered from any source distribution.
-
-
-*/
-
-/* for more info about .ZIP format, see
- http://www.info-zip.org/pub/infozip/doc/appnote-981119-iz.zip
- http://www.info-zip.org/pub/infozip/doc/
- PkWare has also a specification at :
- ftp://ftp.pkware.com/probdesc.zip
-*/
-
-#ifndef _zip_H
-#define _zip_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#define NOCRYPT
-
-#ifndef _ZLIB_H
-#include "zlib.h"
-#endif
-
-#ifndef _ZLIBIOAPI_H
-#include "ioapi.h"
-#endif
-
-#if defined(STRICTZIP) || defined(STRICTZIPUNZIP)
-/* like the STRICT of WIN32, we define a pointer that cannot be converted
- from (void*) without cast */
-typedef struct TagzipFile__ { int unused; } zipFile__;
-typedef zipFile__ *zipFile;
-#else
-typedef voidp zipFile;
-#endif
-
-#define ZIP_OK (0)
-#define ZIP_EOF (0)
-#define ZIP_ERRNO (Z_ERRNO)
-#define ZIP_PARAMERROR (-102)
-#define ZIP_BADZIPFILE (-103)
-#define ZIP_INTERNALERROR (-104)
-
-#ifndef DEF_MEM_LEVEL
-# if MAX_MEM_LEVEL >= 8
-# define DEF_MEM_LEVEL 8
-# else
-# define DEF_MEM_LEVEL MAX_MEM_LEVEL
-# endif
-#endif
-/* default memLevel */
-
-/* tm_zip contain date/time info */
-typedef struct tm_zip_s
-{
- uInt tm_sec; /* seconds after the minute - [0,59] */
- uInt tm_min; /* minutes after the hour - [0,59] */
- uInt tm_hour; /* hours since midnight - [0,23] */
- uInt tm_mday; /* day of the month - [1,31] */
- uInt tm_mon; /* months since January - [0,11] */
- uInt tm_year; /* years - [1980..2044] */
-} tm_zip;
-
-typedef struct
-{
- tm_zip tmz_date; /* date in understandable format */
- uLong dosDate; /* if dos_date == 0, tmu_date is used */
-/* uLong flag; */ /* general purpose bit flag 2 bytes */
-
- uLong internal_fa; /* internal file attributes 2 bytes */
- uLong external_fa; /* external file attributes 4 bytes */
-} zip_fileinfo;
-
-typedef const char* zipcharpc;
-
-
-#define APPEND_STATUS_CREATE (0)
-#define APPEND_STATUS_CREATEAFTER (1)
-#define APPEND_STATUS_ADDINZIP (2)
-
-extern zipFile ZEXPORT zipOpen OF((const char *pathname, int append));
-/*
- Create a zipfile.
- pathname contain on Windows XP a filename like "c:\\zlib\\zlib113.zip" or on
- an Unix computer "zlib/zlib113.zip".
- if the file pathname exist and append==APPEND_STATUS_CREATEAFTER, the zip
- will be created at the end of the file.
- (useful if the file contain a self extractor code)
- if the file pathname exist and append==APPEND_STATUS_ADDINZIP, we will
- add files in existing zip (be sure you don't add file that doesn't exist)
- If the zipfile cannot be opened, the return value is NULL.
- Else, the return value is a zipFile Handle, usable with other function
- of this zip package.
-*/
-
-/* Note : there is no delete function into a zipfile.
- If you want delete file into a zipfile, you must open a zipfile, and create another
- Of couse, you can use RAW reading and writing to copy the file you did not want delte
-*/
-
-extern zipFile ZEXPORT zipOpen2 OF((const char *pathname,
- int append,
- zipcharpc* globalcomment,
- zlib_filefunc_def* pzlib_filefunc_def));
-
-extern int ZEXPORT zipOpenNewFileInZip OF((zipFile file,
- const char* filename,
- const zip_fileinfo* zipfi,
- const void* extrafield_local,
- uInt size_extrafield_local,
- const void* extrafield_global,
- uInt size_extrafield_global,
- const char* comment,
- int method,
- int level));
-/*
- Open a file in the ZIP for writing.
- filename : the filename in zip (if NULL, '-' without quote will be used
- *zipfi contain supplemental information
- if extrafield_local!=NULL and size_extrafield_local>0, extrafield_local
- contains the extrafield data the the local header
- if extrafield_global!=NULL and size_extrafield_global>0, extrafield_global
- contains the extrafield data the the local header
- if comment != NULL, comment contain the comment string
- method contain the compression method (0 for store, Z_DEFLATED for deflate)
- level contain the level of compression (can be Z_DEFAULT_COMPRESSION)
-*/
-
-
-extern int ZEXPORT zipOpenNewFileInZip2 OF((zipFile file,
- const char* filename,
- const zip_fileinfo* zipfi,
- const void* extrafield_local,
- uInt size_extrafield_local,
- const void* extrafield_global,
- uInt size_extrafield_global,
- const char* comment,
- int method,
- int level,
- int raw));
-
-/*
- Same than zipOpenNewFileInZip, except if raw=1, we write raw file
- */
-
-extern int ZEXPORT zipOpenNewFileInZip3 OF((zipFile file,
- const char* filename,
- const zip_fileinfo* zipfi,
- const void* extrafield_local,
- uInt size_extrafield_local,
- const void* extrafield_global,
- uInt size_extrafield_global,
- const char* comment,
- int method,
- int level,
- int raw,
- int windowBits,
- int memLevel,
- int strategy,
- const char* password,
- uLong crcForCtypting));
-
-/*
- Same than zipOpenNewFileInZip2, except
- windowBits,memLevel,,strategy : see parameter strategy in deflateInit2
- password : crypting password (NULL for no crypting)
- crcForCtypting : crc of file to compress (needed for crypting)
- */
-
-
-extern int ZEXPORT zipWriteInFileInZip OF((zipFile file,
- const void* buf,
- unsigned len));
-/*
- Write data in the zipfile
-*/
-
-extern int ZEXPORT zipCloseFileInZip OF((zipFile file));
-/*
- Close the current file in the zipfile
-*/
-
-extern int ZEXPORT zipCloseFileInZipRaw OF((zipFile file,
- uLong uncompressed_size,
- uLong crc32));
-/*
- Close the current file in the zipfile, for fiel opened with
- parameter raw=1 in zipOpenNewFileInZip2
- uncompressed_size and crc32 are value for the uncompressed size
-*/
-
-extern int ZEXPORT zipClose OF((zipFile file,
- const char* global_comment));
-/*
- Close the zipfile
-*/
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* _zip_H */
|