diff options
Diffstat (limited to 'opl/fmopl.c')
| -rw-r--r-- | opl/fmopl.c | 1155 |
1 files changed, 0 insertions, 1155 deletions
diff --git a/opl/fmopl.c b/opl/fmopl.c deleted file mode 100644 index 1671244e..00000000 --- a/opl/fmopl.c +++ /dev/null @@ -1,1155 +0,0 @@ -/* This file is derived from fmopl.cpp from ScummVM. - * - * ScummVM is the legal property of its developers, whose names - * are too numerous to list here. Please refer to the COPYRIGHT - * file distributed with this source distribution. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - * - * LGPL licensed version of MAMEs fmopl (V0.37a modified) by - * Tatsuyuki Satoh. Included from LGPL'ed AdPlug. - */ - -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include <stdarg.h> -#include <math.h> - -#include "fmopl.h" - -#define PI 3.1415926539 - -#define CLIP(value, min, max) \ - ( (value) < (min) ? (min) : \ - (value) > (max) ? (max) : (value) ) - -/* -------------------- preliminary define section --------------------- */ -/* attack/decay rate time rate */ -#define OPL_ARRATE 141280 /* RATE 4 = 2826.24ms @ 3.6MHz */ -#define OPL_DRRATE 1956000 /* RATE 4 = 39280.64ms @ 3.6MHz */ - -#define FREQ_BITS 24 /* frequency turn */ - -/* counter bits = 20 , octerve 7 */ -#define FREQ_RATE (1<<(FREQ_BITS-20)) -#define TL_BITS (FREQ_BITS+2) - -/* final output shift , limit minimum and maximum */ -#define OPL_OUTSB (TL_BITS+3-16) /* OPL output final shift 16bit */ -#define OPL_MAXOUT (0x7fff<<OPL_OUTSB) -#define OPL_MINOUT (-0x8000<<OPL_OUTSB) - -/* -------------------- quality selection --------------------- */ - -/* sinwave entries */ -/* used static memory = SIN_ENT * 4 (byte) */ -#define SIN_ENT_SHIFT 11 -#define SIN_ENT (1<<SIN_ENT_SHIFT) - -/* output level entries (envelope,sinwave) */ -/* envelope counter lower bits */ -static int ENV_BITS; -/* envelope output entries */ -static int EG_ENT; - -/* used dynamic memory = EG_ENT*4*4(byte)or EG_ENT*6*4(byte) */ -/* used static memory = EG_ENT*4 (byte) */ -static int EG_OFF; /* OFF */ -static int EG_DED; -static int EG_DST; /* DECAY START */ -static int EG_AED; -#define EG_AST 0 /* ATTACK START */ - -#define EG_STEP (96.0/EG_ENT) /* OPL is 0.1875 dB step */ - -/* LFO table entries */ -#define VIB_ENT 512 -#define VIB_SHIFT (32-9) -#define AMS_ENT 512 -#define AMS_SHIFT (32-9) - -#define VIB_RATE_SHIFT 8 -#define VIB_RATE (1<<VIB_RATE_SHIFT) - -/* -------------------- local defines , macros --------------------- */ - -/* register number to channel number , slot offset */ -#define SLOT1 0 -#define SLOT2 1 - -/* envelope phase */ -#define ENV_MOD_RR 0x00 -#define ENV_MOD_DR 0x01 -#define ENV_MOD_AR 0x02 - -/* -------------------- tables --------------------- */ -static const int slot_array[32] = { - 0, 2, 4, 1, 3, 5,-1,-1, - 6, 8,10, 7, 9,11,-1,-1, - 12,14,16,13,15,17,-1,-1, - -1,-1,-1,-1,-1,-1,-1,-1 -}; - -static uint32_t KSL_TABLE[8 * 16]; - -static const double KSL_TABLE_SEED[8 * 16] = { - /* OCT 0 */ - 0.000, 0.000, 0.000, 0.000, - 0.000, 0.000, 0.000, 0.000, - 0.000, 0.000, 0.000, 0.000, - 0.000, 0.000, 0.000, 0.000, - /* OCT 1 */ - 0.000, 0.000, 0.000, 0.000, - 0.000, 0.000, 0.000, 0.000, - 0.000, 0.750, 1.125, 1.500, - 1.875, 2.250, 2.625, 3.000, - /* OCT 2 */ - 0.000, 0.000, 0.000, 0.000, - 0.000, 1.125, 1.875, 2.625, - 3.000, 3.750, 4.125, 4.500, - 4.875, 5.250, 5.625, 6.000, - /* OCT 3 */ - 0.000, 0.000, 0.000, 1.875, - 3.000, 4.125, 4.875, 5.625, - 6.000, 6.750, 7.125, 7.500, - 7.875, 8.250, 8.625, 9.000, - /* OCT 4 */ - 0.000, 0.000, 3.000, 4.875, - 6.000, 7.125, 7.875, 8.625, - 9.000, 9.750, 10.125, 10.500, - 10.875, 11.250, 11.625, 12.000, - /* OCT 5 */ - 0.000, 3.000, 6.000, 7.875, - 9.000, 10.125, 10.875, 11.625, - 12.000, 12.750, 13.125, 13.500, - 13.875, 14.250, 14.625, 15.000, - /* OCT 6 */ - 0.000, 6.000, 9.000, 10.875, - 12.000, 13.125, 13.875, 14.625, - 15.000, 15.750, 16.125, 16.500, - 16.875, 17.250, 17.625, 18.000, - /* OCT 7 */ - 0.000, 9.000, 12.000, 13.875, - 15.000, 16.125, 16.875, 17.625, - 18.000, 18.750, 19.125, 19.500, - 19.875, 20.250, 20.625, 21.000 -}; - -/* sustain level table (3db per step) */ -/* 0 - 15: 0, 3, 6, 9,12,15,18,21,24,27,30,33,36,39,42,93 (dB)*/ - -static int SL_TABLE[16]; - -static const uint32_t SL_TABLE_SEED[16] = { - 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 31 -}; - -#define TL_MAX (EG_ENT * 2) /* limit(tl + ksr + envelope) + sinwave */ -/* TotalLevel : 48 24 12 6 3 1.5 0.75 (dB) */ -/* TL_TABLE[ 0 to TL_MAX ] : plus section */ -/* TL_TABLE[ TL_MAX to TL_MAX+TL_MAX-1 ] : minus section */ -static int *TL_TABLE; - -/* pointers to TL_TABLE with sinwave output offset */ -static int **SIN_TABLE; - -/* LFO table */ -static int *AMS_TABLE; -static int *VIB_TABLE; - -/* envelope output curve table */ -/* attack + decay + OFF */ -//static int ENV_CURVE[2*EG_ENT+1]; -//static int ENV_CURVE[2 * 4096 + 1]; // to keep it static ... -static int *ENV_CURVE; - - -/* multiple table */ -#define ML(a) (int)(a * 2) -static const uint32_t MUL_TABLE[16]= { -/* 1/2, 1, 2, 3, 4, 5, 6, 7, 8, 9,10,11,12,13,14,15 */ - ML(0.50), ML(1.00), ML(2.00), ML(3.00), ML(4.00), ML(5.00), ML(6.00), ML(7.00), - ML(8.00), ML(9.00), ML(10.00), ML(10.00),ML(12.00),ML(12.00),ML(15.00),ML(15.00) -}; -#undef ML - -/* dummy attack / decay rate ( when rate == 0 ) */ -static int RATE_0[16]= -{0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0}; - -/* -------------------- static state --------------------- */ - -/* lock level of common table */ -static int num_lock = 0; - -/* work table */ -static void *cur_chip = NULL; /* current chip point */ -/* currenct chip state */ -/* static OPLSAMPLE *bufL,*bufR; */ -static OPL_CH *S_CH; -static OPL_CH *E_CH; -static OPL_SLOT *SLOT7_1, *SLOT7_2, *SLOT8_1, *SLOT8_2; - -static int outd[1]; -static int ams; -static int vib; -static int *ams_table; -static int *vib_table; -static int amsIncr; -static int vibIncr; -static int feedback2; /* connect for SLOT 2 */ - -/* --------------------- rebuild tables ------------------- */ - -#define ARRAYSIZE(x) (sizeof(x) / sizeof(*x)) -#define SC_KSL(mydb) ((uint32_t) (mydb / (EG_STEP / 2))) -#define SC_SL(db) (int)(db * ((3 / EG_STEP) * (1 << ENV_BITS))) + EG_DST - -void OPLBuildTables(int ENV_BITS_PARAM, int EG_ENT_PARAM) { - int i; - - ENV_BITS = ENV_BITS_PARAM; - EG_ENT = EG_ENT_PARAM; - EG_OFF = ((2 * EG_ENT)<<ENV_BITS); /* OFF */ - EG_DED = EG_OFF; - EG_DST = (EG_ENT << ENV_BITS); /* DECAY START */ - EG_AED = EG_DST; - //EG_STEP = (96.0/EG_ENT); - - for (i = 0; i < ARRAYSIZE(KSL_TABLE_SEED); i++) - KSL_TABLE[i] = SC_KSL(KSL_TABLE_SEED[i]); - - for (i = 0; i < ARRAYSIZE(SL_TABLE_SEED); i++) - SL_TABLE[i] = SC_SL(SL_TABLE_SEED[i]); -} - -#undef SC_KSL -#undef SC_SL - -/* --------------------- subroutines --------------------- */ - -/* status set and IRQ handling */ -static inline void OPL_STATUS_SET(FM_OPL *OPL, int flag) { - /* set status flag */ - OPL->status |= flag; - if(!(OPL->status & 0x80)) { - if(OPL->status & OPL->statusmask) { /* IRQ on */ - OPL->status |= 0x80; - /* callback user interrupt handler (IRQ is OFF to ON) */ - if(OPL->IRQHandler) - (OPL->IRQHandler)(OPL->IRQParam,1); - } - } -} - -/* status reset and IRQ handling */ -static inline void OPL_STATUS_RESET(FM_OPL *OPL, int flag) { - /* reset status flag */ - OPL->status &= ~flag; - if((OPL->status & 0x80)) { - if (!(OPL->status & OPL->statusmask)) { - OPL->status &= 0x7f; - /* callback user interrupt handler (IRQ is ON to OFF) */ - if(OPL->IRQHandler) (OPL->IRQHandler)(OPL->IRQParam,0); - } - } -} - -/* IRQ mask set */ -static inline void OPL_STATUSMASK_SET(FM_OPL *OPL, int flag) { - OPL->statusmask = flag; - /* IRQ handling check */ - OPL_STATUS_SET(OPL,0); - OPL_STATUS_RESET(OPL,0); -} - -/* ----- key on ----- */ -static inline void OPL_KEYON(OPL_SLOT *SLOT) { - /* sin wave restart */ - SLOT->Cnt = 0; - /* set attack */ - SLOT->evm = ENV_MOD_AR; - SLOT->evs = SLOT->evsa; - SLOT->evc = EG_AST; - SLOT->eve = EG_AED; -} - -/* ----- key off ----- */ -static inline void OPL_KEYOFF(OPL_SLOT *SLOT) { - if( SLOT->evm > ENV_MOD_RR) { - /* set envelope counter from envleope output */ - - // WORKAROUND: The Kyra engine does something very strange when - // starting a new song. For each channel: - // - // * The release rate is set to "fastest". - // * Any note is keyed off. - // * A very low-frequency note is keyed on. - // - // Usually, what happens next is that the real notes is keyed - // on immediately, in which case there's no problem. - // - // However, if the note is again keyed off (because the channel - // begins on a rest rather than a note), the envelope counter - // was moved from the very lowest point on the attack curve to - // the very highest point on the release curve. - // - // Again, this might not be a problem, if the release rate is - // still set to "fastest". But in many cases, it had already - // been increased. And, possibly because of inaccuracies in the - // envelope generator, that would cause the note to "fade out" - // for quite a long time. - // - // What we really need is a way to find the correct starting - // point for the envelope counter, and that may be what the - // commented-out line below is meant to do. For now, simply - // handle the pathological case. - - if (SLOT->evm == ENV_MOD_AR && SLOT->evc == EG_AST) - SLOT->evc = EG_DED; - else if( !(SLOT->evc & EG_DST) ) - //SLOT->evc = (ENV_CURVE[SLOT->evc>>ENV_BITS]<<ENV_BITS) + EG_DST; - SLOT->evc = EG_DST; - SLOT->eve = EG_DED; - SLOT->evs = SLOT->evsr; - SLOT->evm = ENV_MOD_RR; - } -} - -/* ---------- calcrate Envelope Generator & Phase Generator ---------- */ - -/* return : envelope output */ -static inline uint32_t OPL_CALC_SLOT(OPL_SLOT *SLOT) { - /* calcrate envelope generator */ - if((SLOT->evc += SLOT->evs) >= SLOT->eve) { - switch( SLOT->evm ) { - case ENV_MOD_AR: /* ATTACK -> DECAY1 */ - /* next DR */ - SLOT->evm = ENV_MOD_DR; - SLOT->evc = EG_DST; - SLOT->eve = SLOT->SL; - SLOT->evs = SLOT->evsd; - break; - case ENV_MOD_DR: /* DECAY -> SL or RR */ - SLOT->evc = SLOT->SL; - SLOT->eve = EG_DED; - if(SLOT->eg_typ) { - SLOT->evs = 0; - } else { - SLOT->evm = ENV_MOD_RR; - SLOT->evs = SLOT->evsr; - } - break; - case ENV_MOD_RR: /* RR -> OFF */ - SLOT->evc = EG_OFF; - SLOT->eve = EG_OFF + 1; - SLOT->evs = 0; - break; - } - } - /* calcrate envelope */ - return SLOT->TLL + ENV_CURVE[SLOT->evc>>ENV_BITS] + (SLOT->ams ? ams : 0); -} - -/* set algorythm connection */ -static void set_algorythm(OPL_CH *CH) { - int *carrier = &outd[0]; - CH->connect1 = CH->CON ? carrier : &feedback2; - CH->connect2 = carrier; -} - -/* ---------- frequency counter for operater update ---------- */ -static inline void CALC_FCSLOT(OPL_CH *CH, OPL_SLOT *SLOT) { - int ksr; - - /* frequency step counter */ - SLOT->Incr = CH->fc * SLOT->mul; - ksr = CH->kcode >> SLOT->KSR; - - if( SLOT->ksr != ksr ) { - SLOT->ksr = ksr; - /* attack , decay rate recalcration */ - SLOT->evsa = SLOT->AR[ksr]; - SLOT->evsd = SLOT->DR[ksr]; - SLOT->evsr = SLOT->RR[ksr]; - } - SLOT->TLL = SLOT->TL + (CH->ksl_base>>SLOT->ksl); -} - -/* set multi,am,vib,EG-TYP,KSR,mul */ -static inline void set_mul(FM_OPL *OPL, int slot, int v) { - OPL_CH *CH = &OPL->P_CH[slot>>1]; - OPL_SLOT *SLOT = &CH->SLOT[slot & 1]; - - SLOT->mul = MUL_TABLE[v & 0x0f]; - SLOT->KSR = (v & 0x10) ? 0 : 2; - SLOT->eg_typ = (v & 0x20) >> 5; - SLOT->vib = (v & 0x40); - SLOT->ams = (v & 0x80); - CALC_FCSLOT(CH, SLOT); -} - -/* set ksl & tl */ -static inline void set_ksl_tl(FM_OPL *OPL, int slot, int v) { - OPL_CH *CH = &OPL->P_CH[slot>>1]; - OPL_SLOT *SLOT = &CH->SLOT[slot & 1]; - int ksl = v >> 6; /* 0 / 1.5 / 3 / 6 db/OCT */ - - SLOT->ksl = ksl ? 3-ksl : 31; - SLOT->TL = (int)((v & 0x3f) * (0.75 / EG_STEP)); /* 0.75db step */ - - if(!(OPL->mode & 0x80)) { /* not CSM latch total level */ - SLOT->TLL = SLOT->TL + (CH->ksl_base >> SLOT->ksl); - } -} - -/* set attack rate & decay rate */ -static inline void set_ar_dr(FM_OPL *OPL, int slot, int v) { - OPL_CH *CH = &OPL->P_CH[slot>>1]; - OPL_SLOT *SLOT = &CH->SLOT[slot & 1]; - int ar = v >> 4; - int dr = v & 0x0f; - - SLOT->AR = ar ? &OPL->AR_TABLE[ar << 2] : RATE_0; - SLOT->evsa = SLOT->AR[SLOT->ksr]; - if(SLOT->evm == ENV_MOD_AR) - SLOT->evs = SLOT->evsa; - - SLOT->DR = dr ? &OPL->DR_TABLE[dr<<2] : RATE_0; - SLOT->evsd = SLOT->DR[SLOT->ksr]; - if(SLOT->evm == ENV_MOD_DR) - SLOT->evs = SLOT->evsd; -} - -/* set sustain level & release rate */ -static inline void set_sl_rr(FM_OPL *OPL, int slot, int v) { - OPL_CH *CH = &OPL->P_CH[slot>>1]; - OPL_SLOT *SLOT = &CH->SLOT[slot & 1]; - int sl = v >> 4; - int rr = v & 0x0f; - - SLOT->SL = SL_TABLE[sl]; - if(SLOT->evm == ENV_MOD_DR) - SLOT->eve = SLOT->SL; - SLOT->RR = &OPL->DR_TABLE[rr<<2]; - SLOT->evsr = SLOT->RR[SLOT->ksr]; - if(SLOT->evm == ENV_MOD_RR) - SLOT->evs = SLOT->evsr; -} - -/* operator output calcrator */ - -#define OP_OUT(slot,env,con) slot->wavetable[((slot->Cnt + con)>>(24-SIN_ENT_SHIFT)) & (SIN_ENT-1)][env] -/* ---------- calcrate one of channel ---------- */ -static inline void OPL_CALC_CH(OPL_CH *CH) { - uint32_t env_out; - OPL_SLOT *SLOT; - - feedback2 = 0; - /* SLOT 1 */ - SLOT = &CH->SLOT[SLOT1]; - env_out=OPL_CALC_SLOT(SLOT); - if(env_out < (uint32_t)(EG_ENT - 1)) { - /* PG */ - if(SLOT->vib) - SLOT->Cnt += (SLOT->Incr * vib) >> VIB_RATE_SHIFT; - else - SLOT->Cnt += SLOT->Incr; - /* connection */ - if(CH->FB) { - int feedback1 = (CH->op1_out[0] + CH->op1_out[1]) >> CH->FB; - CH->op1_out[1] = CH->op1_out[0]; - *CH->connect1 += CH->op1_out[0] = OP_OUT(SLOT, env_out, feedback1); - } else { - *CH->connect1 += OP_OUT(SLOT, env_out, 0); - } - } else { - CH->op1_out[1] = CH->op1_out[0]; - CH->op1_out[0] = 0; - } - /* SLOT 2 */ - SLOT = &CH->SLOT[SLOT2]; - env_out=OPL_CALC_SLOT(SLOT); - if(env_out < (uint32_t)(EG_ENT - 1)) { - /* PG */ - if(SLOT->vib) - SLOT->Cnt += (SLOT->Incr * vib) >> VIB_RATE_SHIFT; - else - SLOT->Cnt += SLOT->Incr; - /* connection */ - outd[0] += OP_OUT(SLOT, env_out, feedback2); - } -} - -/* ---------- calcrate rythm block ---------- */ -#define WHITE_NOISE_db 6.0 -static inline void OPL_CALC_RH(FM_OPL *OPL, OPL_CH *CH) { - uint32_t env_tam, env_sd, env_top, env_hh; - // This code used to do int(OPL->rnd.getRandomBit() * (WHITE_NOISE_db / EG_STEP)), - // but EG_STEP = 96.0/EG_ENT, and WHITE_NOISE_db=6.0. So, that's equivalent to - // int(OPL->rnd.getRandomBit() * EG_ENT/16). We know that EG_ENT is 4096, or 1024, - // or 128, so we can safely avoid any FP ops. - int whitenoise = (rand() & 1) * (EG_ENT>>4); - - int tone8; - - OPL_SLOT *SLOT; - int env_out; - - /* BD : same as FM serial mode and output level is large */ - feedback2 = 0; - /* SLOT 1 */ - SLOT = &CH[6].SLOT[SLOT1]; - env_out = OPL_CALC_SLOT(SLOT); - if(env_out < EG_ENT-1) { - /* PG */ - if(SLOT->vib) - SLOT->Cnt += (SLOT->Incr * vib) >> VIB_RATE_SHIFT; - else - SLOT->Cnt += SLOT->Incr; - /* connection */ - if(CH[6].FB) { - int feedback1 = (CH[6].op1_out[0] + CH[6].op1_out[1]) >> CH[6].FB; - CH[6].op1_out[1] = CH[6].op1_out[0]; - feedback2 = CH[6].op1_out[0] = OP_OUT(SLOT, env_out, feedback1); - } - else { - feedback2 = OP_OUT(SLOT, env_out, 0); - } - } else { - feedback2 = 0; - CH[6].op1_out[1] = CH[6].op1_out[0]; - CH[6].op1_out[0] = 0; - } - /* SLOT 2 */ - SLOT = &CH[6].SLOT[SLOT2]; - env_out = OPL_CALC_SLOT(SLOT); - if(env_out < EG_ENT-1) { - /* PG */ - if(SLOT->vib) - SLOT->Cnt += (SLOT->Incr * vib) >> VIB_RATE_SHIFT; - else - SLOT->Cnt += SLOT->Incr; - /* connection */ - outd[0] += OP_OUT(SLOT, env_out, feedback2) * 2; - } - - // SD (17) = mul14[fnum7] + white noise - // TAM (15) = mul15[fnum8] - // TOP (18) = fnum6(mul18[fnum8]+whitenoise) - // HH (14) = fnum7(mul18[fnum8]+whitenoise) + white noise - env_sd = OPL_CALC_SLOT(SLOT7_2) + whitenoise; - env_tam =OPL_CALC_SLOT(SLOT8_1); - env_top = OPL_CALC_SLOT(SLOT8_2); - env_hh = OPL_CALC_SLOT(SLOT7_1) + whitenoise; - - /* PG */ - if(SLOT7_1->vib) - SLOT7_1->Cnt += (SLOT7_1->Incr * vib) >> (VIB_RATE_SHIFT-1); - else - SLOT7_1->Cnt += 2 * SLOT7_1->Incr; - if(SLOT7_2->vib) - SLOT7_2->Cnt += (CH[7].fc * vib) >> (VIB_RATE_SHIFT-3); - else - SLOT7_2->Cnt += (CH[7].fc * 8); - if(SLOT8_1->vib) - SLOT8_1->Cnt += (SLOT8_1->Incr * vib) >> VIB_RATE_SHIFT; - else - SLOT8_1->Cnt += SLOT8_1->Incr; - if(SLOT8_2->vib) - SLOT8_2->Cnt += ((CH[8].fc * 3) * vib) >> (VIB_RATE_SHIFT-4); - else - SLOT8_2->Cnt += (CH[8].fc * 48); - - tone8 = OP_OUT(SLOT8_2,whitenoise,0 ); - - /* SD */ - if(env_sd < (uint32_t)(EG_ENT - 1)) - outd[0] += OP_OUT(SLOT7_1, env_sd, 0) * 8; - /* TAM */ - if(env_tam < (uint32_t)(EG_ENT - 1)) - outd[0] += OP_OUT(SLOT8_1, env_tam, 0) * 2; - /* TOP-CY */ - if(env_top < (uint32_t)(EG_ENT - 1)) - outd[0] += OP_OUT(SLOT7_2, env_top, tone8) * 2; - /* HH */ - if(env_hh < (uint32_t)(EG_ENT-1)) - outd[0] += OP_OUT(SLOT7_2, env_hh, tone8) * 2; -} - -/* ----------- initialize time tabls ----------- */ -static void init_timetables(FM_OPL *OPL, int ARRATE, int DRRATE) { - int i; - double rate; - - /* make attack rate & decay rate tables */ - for (i = 0; i < 4; i++) - OPL->AR_TABLE[i] = OPL->DR_TABLE[i] = 0; - for (i = 4; i <= 60; i++) { - rate = OPL->freqbase; /* frequency rate */ - if(i < 60) - rate *= 1.0 + (i & 3) * 0.25; /* b0-1 : x1 , x1.25 , x1.5 , x1.75 */ - rate *= 1 << ((i >> 2) - 1); /* b2-5 : shift bit */ - rate *= (double)(EG_ENT << ENV_BITS); - OPL->AR_TABLE[i] = (int)(rate / ARRATE); - OPL->DR_TABLE[i] = (int)(rate / DRRATE); - } - for (i = 60; i < 76; i++) { - OPL->AR_TABLE[i] = EG_AED-1; - OPL->DR_TABLE[i] = OPL->DR_TABLE[60]; - } -} - -/* ---------- generic table initialize ---------- */ -static int OPLOpenTable(void) { - int s,t; - double rate; - int i,j; - double pom; - - /* allocate dynamic tables */ - if((TL_TABLE = (int *)malloc(TL_MAX * 2 * sizeof(int))) == NULL) - return 0; - - if((SIN_TABLE = (int **)malloc(SIN_ENT * 4 * sizeof(int *))) == NULL) { - free(TL_TABLE); - return 0; - } - - if((AMS_TABLE = (int *)malloc(AMS_ENT * 2 * sizeof(int))) == NULL) { - free(TL_TABLE); - free(SIN_TABLE); - return 0; - } - - if((VIB_TABLE = (int *)malloc(VIB_ENT * 2 * sizeof(int))) == NULL) { - free(TL_TABLE); - free(SIN_TABLE); - free(AMS_TABLE); - return 0; - } - /* make total level table */ - for (t = 0; t < EG_ENT - 1 ; t++) { - rate = ((1 << TL_BITS) - 1) / pow(10.0, EG_STEP * t / 20); /* dB -> voltage */ - TL_TABLE[ t] = (int)rate; - TL_TABLE[TL_MAX + t] = -TL_TABLE[t]; - } - /* fill volume off area */ - for (t = EG_ENT - 1; t < TL_MAX; t++) { - TL_TABLE[t] = TL_TABLE[TL_MAX + t] = 0; - } - - /* make sinwave table (total level offet) */ - /* degree 0 = degree 180 = off */ - SIN_TABLE[0] = SIN_TABLE[SIN_ENT /2 ] = &TL_TABLE[EG_ENT - 1]; - for (s = 1;s <= SIN_ENT / 4; s++) { - pom = sin(2 * PI * s / SIN_ENT); /* sin */ - pom = 20 * log10(1 / pom); /* decibel */ - j = (int) (pom / EG_STEP); /* TL_TABLE steps */ - - /* degree 0 - 90 , degree 180 - 90 : plus section */ - SIN_TABLE[ s] = SIN_TABLE[SIN_ENT / 2 - s] = &TL_TABLE[j]; - /* degree 180 - 270 , degree 360 - 270 : minus section */ - SIN_TABLE[SIN_ENT / 2 + s] = SIN_TABLE[SIN_ENT - s] = &TL_TABLE[TL_MAX + j]; - } - for (s = 0;s < SIN_ENT; s++) { - SIN_TABLE[SIN_ENT * 1 + s] = s < (SIN_ENT / 2) ? SIN_TABLE[s] : &TL_TABLE[EG_ENT]; - SIN_TABLE[SIN_ENT * 2 + s] = SIN_TABLE[s % (SIN_ENT / 2)]; - SIN_TABLE[SIN_ENT * 3 + s] = (s / (SIN_ENT / 4)) & 1 ? &TL_TABLE[EG_ENT] : SIN_TABLE[SIN_ENT * 2 + s]; - } - - - ENV_CURVE = (int *)malloc(sizeof(int) * (2*EG_ENT+1)); - - /* envelope counter -> envelope output table */ - for (i=0; i < EG_ENT; i++) { - /* ATTACK curve */ - pom = pow(((double)(EG_ENT - 1 - i) / EG_ENT), 8) * EG_ENT; - /* if( pom >= EG_ENT ) pom = EG_ENT-1; */ - ENV_CURVE[i] = (int)pom; - /* DECAY ,RELEASE curve */ - ENV_CURVE[(EG_DST >> ENV_BITS) + i]= i; - } - /* off */ - ENV_CURVE[EG_OFF >> ENV_BITS]= EG_ENT - 1; - /* make LFO ams table */ - for (i=0; i < AMS_ENT; i++) { - pom = (1.0 + sin(2 * PI * i / AMS_ENT)) / 2; /* sin */ - AMS_TABLE[i] = (int)((1.0 / EG_STEP) * pom); /* 1dB */ - AMS_TABLE[AMS_ENT + i] = (int)((4.8 / EG_STEP) * pom); /* 4.8dB */ - } - /* make LFO vibrate table */ - for (i=0; i < VIB_ENT; i++) { - /* 100cent = 1seminote = 6% ?? */ - pom = (double)VIB_RATE * 0.06 * sin(2 * PI * i / VIB_ENT); /* +-100sect step */ - VIB_TABLE[i] = (int)(VIB_RATE + (pom * 0.07)); /* +- 7cent */ - VIB_TABLE[VIB_ENT + i] = (int)(VIB_RATE + (pom * 0.14)); /* +-14cent */ - } - return 1; -} - -static void OPLCloseTable(void) { - free(TL_TABLE); - free(SIN_TABLE); - free(AMS_TABLE); - free(VIB_TABLE); - free(ENV_CURVE); -} - -/* CSM Key Controll */ -static inline void CSMKeyControll(OPL_CH *CH) { - OPL_SLOT *slot1 = &CH->SLOT[SLOT1]; - OPL_SLOT *slot2 = &CH->SLOT[SLOT2]; - /* all key off */ - OPL_KEYOFF(slot1); - OPL_KEYOFF(slot2); - /* total level latch */ - slot1->TLL = slot1->TL + (CH->ksl_base>>slot1->ksl); - slot1->TLL = slot1->TL + (CH->ksl_base>>slot1->ksl); - /* key on */ - CH->op1_out[0] = CH->op1_out[1] = 0; - OPL_KEYON(slot1); - OPL_KEYON(slot2); -} - -/* ---------- opl initialize ---------- */ -static void OPL_initalize(FM_OPL *OPL) { - int fn; - - /* frequency base */ - OPL->freqbase = (OPL->rate) ? ((double)OPL->clock / OPL->rate) / 72 : 0; - /* Timer base time */ - OPL->TimerBase = 1.0/((double)OPL->clock / 72.0 ); - /* make time tables */ - init_timetables(OPL, OPL_ARRATE, OPL_DRRATE); - /* make fnumber -> increment counter table */ - for( fn=0; fn < 1024; fn++) { - OPL->FN_TABLE[fn] = (uint32_t)(OPL->freqbase * fn * FREQ_RATE * (1<<7) / 2); - } - /* LFO freq.table */ - OPL->amsIncr = (int)(OPL->rate ? (double)AMS_ENT * (1 << AMS_SHIFT) / OPL->rate * 3.7 * ((double)OPL->clock/3600000) : 0); - OPL->vibIncr = (int)(OPL->rate ? (double)VIB_ENT * (1 << VIB_SHIFT) / OPL->rate * 6.4 * ((double)OPL->clock/3600000) : 0); -} - -/* ---------- write a OPL registers ---------- */ -void OPLWriteReg(FM_OPL *OPL, int r, int v) { - OPL_CH *CH; - int slot; - uint32_t block_fnum; - - switch(r & 0xe0) { - case 0x00: /* 00-1f:controll */ - switch(r & 0x1f) { - case 0x01: - /* wave selector enable */ - if(OPL->type&OPL_TYPE_WAVESEL) { - OPL->wavesel = v & 0x20; - if(!OPL->wavesel) { - /* preset compatible mode */ - int c; - for(c=0; c<OPL->max_ch; c++) { - OPL->P_CH[c].SLOT[SLOT1].wavetable = &SIN_TABLE[0]; - OPL->P_CH[c].SLOT[SLOT2].wavetable = &SIN_TABLE[0]; - } - } - } - return; - case 0x02: /* Timer 1 */ - OPL->T[0] = (256-v) * 4; - break; - case 0x03: /* Timer 2 */ - OPL->T[1] = (256-v) * 16; - return; - case 0x04: /* IRQ clear / mask and Timer enable */ - if(v & 0x80) { /* IRQ flag clear */ - OPL_STATUS_RESET(OPL, 0x7f); - } else { /* set IRQ mask ,timer enable*/ - uint8_t st1 = v & 1; - uint8_t st2 = (v >> 1) & 1; - /* IRQRST,T1MSK,t2MSK,EOSMSK,BRMSK,x,ST2,ST1 */ - OPL_STATUS_RESET(OPL, v & 0x78); - OPL_STATUSMASK_SET(OPL,((~v) & 0x78) | 0x01); - /* timer 2 */ - if(OPL->st[1] != st2) { - double interval = st2 ? (double)OPL->T[1] * OPL->TimerBase : 0.0; - OPL->st[1] = st2; - if (OPL->TimerHandler) (OPL->TimerHandler)(OPL->TimerParam + 1, interval); - } - /* timer 1 */ - if(OPL->st[0] != st1) { - double interval = st1 ? (double)OPL->T[0] * OPL->TimerBase : 0.0; - OPL->st[0] = st1; - if (OPL->TimerHandler) (OPL->TimerHandler)(OPL->TimerParam + 0, interval); - } - } - return; - } - break; - case 0x20: /* am,vib,ksr,eg type,mul */ - slot = slot_array[r&0x1f]; - if(slot == -1) - return; - set_mul(OPL,slot,v); - return; - case 0x40: - slot = slot_array[r&0x1f]; - if(slot == -1) - return; - set_ksl_tl(OPL,slot,v); - return; - case 0x60: - slot = slot_array[r&0x1f]; - if(slot == -1) - return; - set_ar_dr(OPL,slot,v); - return; - case 0x80: - slot = slot_array[r&0x1f]; - if(slot == -1) - return; - set_sl_rr(OPL,slot,v); - return; - case 0xa0: - switch(r) { - case 0xbd: - /* amsep,vibdep,r,bd,sd,tom,tc,hh */ - { - uint8_t rkey = OPL->rythm ^ v; - OPL->ams_table = &AMS_TABLE[v & 0x80 ? AMS_ENT : 0]; - OPL->vib_table = &VIB_TABLE[v & 0x40 ? VIB_ENT : 0]; - OPL->rythm = v & 0x3f; - if(OPL->rythm & 0x20) { - /* BD key on/off */ - if(rkey & 0x10) { - if(v & 0x10) { - OPL->P_CH[6].op1_out[0] = OPL->P_CH[6].op1_out[1] = 0; - OPL_KEYON(&OPL->P_CH[6].SLOT[SLOT1]); - OPL_KEYON(&OPL->P_CH[6].SLOT[SLOT2]); - } else { - OPL_KEYOFF(&OPL->P_CH[6].SLOT[SLOT1]); - OPL_KEYOFF(&OPL->P_CH[6].SLOT[SLOT2]); - } - } - /* SD key on/off */ - if(rkey & 0x08) { - if(v & 0x08) - OPL_KEYON(&OPL->P_CH[7].SLOT[SLOT2]); - else - OPL_KEYOFF(&OPL->P_CH[7].SLOT[SLOT2]); - }/* TAM key on/off */ - if(rkey & 0x04) { - if(v & 0x04) - OPL_KEYON(&OPL->P_CH[8].SLOT[SLOT1]); - else - OPL_KEYOFF(&OPL->P_CH[8].SLOT[SLOT1]); - } - /* TOP-CY key on/off */ - if(rkey & 0x02) { - if(v & 0x02) - OPL_KEYON(&OPL->P_CH[8].SLOT[SLOT2]); - else - OPL_KEYOFF(&OPL->P_CH[8].SLOT[SLOT2]); - } - /* HH key on/off */ - if(rkey & 0x01) { - if(v & 0x01) - OPL_KEYON(&OPL->P_CH[7].SLOT[SLOT1]); - else - OPL_KEYOFF(&OPL->P_CH[7].SLOT[SLOT1]); - } - } - } - return; - - default: - break; - } - /* keyon,block,fnum */ - if((r & 0x0f) > 8) - return; - CH = &OPL->P_CH[r & 0x0f]; - if(!(r&0x10)) { /* a0-a8 */ - block_fnum = (CH->block_fnum & 0x1f00) | v; - } else { /* b0-b8 */ - int keyon = (v >> 5) & 1; - block_fnum = ((v & 0x1f) << 8) | (CH->block_fnum & 0xff); - if(CH->keyon != keyon) { - if((CH->keyon=keyon)) { - CH->op1_out[0] = CH->op1_out[1] = 0; - OPL_KEYON(&CH->SLOT[SLOT1]); - OPL_KEYON(&CH->SLOT[SLOT2]); - } else { - OPL_KEYOFF(&CH->SLOT[SLOT1]); - OPL_KEYOFF(&CH->SLOT[SLOT2]); - } - } - } - /* update */ - if(CH->block_fnum != block_fnum) { - int blockRv = 7 - (block_fnum >> 10); - int fnum = block_fnum & 0x3ff; - CH->block_fnum = block_fnum; - CH->ksl_base = KSL_TABLE[block_fnum >> 6]; - CH->fc = OPL->FN_TABLE[fnum] >> blockRv; - CH->kcode = CH->block_fnum >> 9; - if((OPL->mode & 0x40) && CH->block_fnum & 0x100) - CH->kcode |=1; - CALC_FCSLOT(CH,&CH->SLOT[SLOT1]); - CALC_FCSLOT(CH,&CH->SLOT[SLOT2]); - } - return; - case 0xc0: - /* FB,C */ - if((r & 0x0f) > 8) - return; - CH = &OPL->P_CH[r&0x0f]; - { - int feedback = (v >> 1) & 7; - CH->FB = feedback ? (8 + 1) - feedback : 0; - CH->CON = v & 1; - set_algorythm(CH); - } - return; - case 0xe0: /* wave type */ - slot = slot_array[r & 0x1f]; - if(slot == -1) - return; - CH = &OPL->P_CH[slot>>1]; - if(OPL->wavesel) { - CH->SLOT[slot&1].wavetable = &SIN_TABLE[(v & 0x03) * SIN_ENT]; - } - return; - } -} - -/* lock/unlock for common table */ -static int OPL_LockTable(void) { - num_lock++; - if(num_lock>1) - return 0; - /* first time */ - cur_chip = NULL; - /* allocate total level table (128kb space) */ - if(!OPLOpenTable()) { - num_lock--; - return -1; - } - return 0; -} - -static void OPL_UnLockTable(void) { - if(num_lock) - num_lock--; - if(num_lock) - return; - /* last time */ - cur_chip = NULL; - OPLCloseTable(); -} - -/*******************************************************************************/ -/* YM3812 local section */ -/*******************************************************************************/ - -/* ---------- update one of chip ----------- */ -void YM3812UpdateOne(FM_OPL *OPL, int16_t *buffer, int length, int interleave) { - int i; - int data; - int16_t *buf = buffer; - uint32_t amsCnt = OPL->amsCnt; - uint32_t vibCnt = OPL->vibCnt; - uint8_t rythm = OPL->rythm & 0x20; - OPL_CH *CH, *R_CH; - - - if((void *)OPL != cur_chip) { - cur_chip = (void *)OPL; - /* channel pointers */ - S_CH = OPL->P_CH; - E_CH = &S_CH[9]; - /* rythm slot */ - SLOT7_1 = &S_CH[7].SLOT[SLOT1]; - SLOT7_2 = &S_CH[7].SLOT[SLOT2]; - SLOT8_1 = &S_CH[8].SLOT[SLOT1]; - SLOT8_2 = &S_CH[8].SLOT[SLOT2]; - /* LFO state */ - amsIncr = OPL->amsIncr; - vibIncr = OPL->vibIncr; - ams_table = OPL->ams_table; - vib_table = OPL->vib_table; - } - R_CH = rythm ? &S_CH[6] : E_CH; - for(i = 0; i < length; i++) { - /* channel A channel B channel C */ - /* LFO */ - ams = ams_table[(amsCnt += amsIncr) >> AMS_SHIFT]; - vib = vib_table[(vibCnt += vibIncr) >> VIB_SHIFT]; - outd[0] = 0; - /* FM part */ - for(CH=S_CH; CH < R_CH; CH++) - OPL_CALC_CH(CH); - /* Rythn part */ - if(rythm) - OPL_CALC_RH(OPL, S_CH); - /* limit check */ - data = CLIP(outd[0], OPL_MINOUT, OPL_MAXOUT); - /* store to sound buffer */ - buf[i << interleave] = data >> OPL_OUTSB; - } - - OPL->amsCnt = amsCnt; - OPL->vibCnt = vibCnt; -} - -/* ---------- reset a chip ---------- */ -void OPLResetChip(FM_OPL *OPL) { - int c,s; - int i; - - /* reset chip */ - OPL->mode = 0; /* normal mode */ - OPL_STATUS_RESET(OPL, 0x7f); - /* reset with register write */ - OPLWriteReg(OPL, 0x01,0); /* wabesel disable */ - OPLWriteReg(OPL, 0x02,0); /* Timer1 */ - OPLWriteReg(OPL, 0x03,0); /* Timer2 */ - OPLWriteReg(OPL, 0x04,0); /* IRQ mask clear */ - for(i = 0xff; i >= 0x20; i--) - OPLWriteReg(OPL,i,0); - /* reset OPerator parameter */ - for(c = 0; c < OPL->max_ch ;c++ ) { - OPL_CH *CH = &OPL->P_CH[c]; - /* OPL->P_CH[c].PAN = OPN_CENTER; */ - for(s = 0; s < 2; s++ ) { - /* wave table */ - CH->SLOT[s].wavetable = &SIN_TABLE[0]; - /* CH->SLOT[s].evm = ENV_MOD_RR; */ - CH->SLOT[s].evc = EG_OFF; - CH->SLOT[s].eve = EG_OFF + 1; - CH->SLOT[s].evs = 0; - } - } -} - -/* ---------- Create a virtual YM3812 ---------- */ -/* 'rate' is sampling rate and 'bufsiz' is the size of the */ -FM_OPL *OPLCreate(int type, int clock, int rate) { - char *ptr; - FM_OPL *OPL; - int state_size; - int max_ch = 9; /* normaly 9 channels */ - - if( OPL_LockTable() == -1) - return NULL; - /* allocate OPL state space */ - state_size = sizeof(FM_OPL); - state_size += sizeof(OPL_CH) * max_ch; - - /* allocate memory block */ - ptr = (char *)calloc(state_size, 1); - if(ptr == NULL) - return NULL; - - /* clear */ - memset(ptr, 0, state_size); - OPL = (FM_OPL *)ptr; ptr += sizeof(FM_OPL); - OPL->P_CH = (OPL_CH *)ptr; ptr += sizeof(OPL_CH) * max_ch; - - /* set channel state pointer */ - OPL->type = type; - OPL->clock = clock; - OPL->rate = rate; - OPL->max_ch = max_ch; - - /* init grobal tables */ - OPL_initalize(OPL); - - /* reset chip */ - OPLResetChip(OPL); - return OPL; -} - -/* ---------- Destroy one of vietual YM3812 ---------- */ -void OPLDestroy(FM_OPL *OPL) { - OPL_UnLockTable(); - free(OPL); -} - -/* ---------- Option handlers ---------- */ -void OPLSetTimerHandler(FM_OPL *OPL, OPL_TIMERHANDLER TimerHandler,int channelOffset) { - OPL->TimerHandler = TimerHandler; - OPL->TimerParam = channelOffset; -} - -void OPLSetIRQHandler(FM_OPL *OPL, OPL_IRQHANDLER IRQHandler, int param) { - OPL->IRQHandler = IRQHandler; - OPL->IRQParam = param; -} - -void OPLSetUpdateHandler(FM_OPL *OPL, OPL_UPDATEHANDLER UpdateHandler,int param) { - OPL->UpdateHandler = UpdateHandler; - OPL->UpdateParam = param; -} - -/* ---------- YM3812 I/O interface ---------- */ -int OPLWrite(FM_OPL *OPL,int a,int v) { - if(!(a & 1)) { /* address port */ - OPL->address = v & 0xff; - } else { /* data port */ - if(OPL->UpdateHandler) - OPL->UpdateHandler(OPL->UpdateParam,0); - OPLWriteReg(OPL, OPL->address,v); - } - return OPL->status >> 7; -} - -unsigned char OPLRead(FM_OPL *OPL,int a) { - if(!(a & 1)) { /* status port */ - return OPL->status & (OPL->statusmask | 0x80); - } - - return 0; -} - -int OPLTimerOver(FM_OPL *OPL, int c) { - if(c) { /* Timer B */ - OPL_STATUS_SET(OPL, 0x20); - } else { /* Timer A */ - OPL_STATUS_SET(OPL, 0x40); - /* CSM mode key,TL controll */ - if(OPL->mode & 0x80) { /* CSM mode total level latch and auto key on */ - int ch; - if(OPL->UpdateHandler) - OPL->UpdateHandler(OPL->UpdateParam,0); - for(ch = 0; ch < 9; ch++) - CSMKeyControll(&OPL->P_CH[ch]); - } - } - /* reload timer */ - if (OPL->TimerHandler) - (OPL->TimerHandler)(OPL->TimerParam + c, (double)OPL->T[c] * OPL->TimerBase); - return OPL->status >> 7; -} - -FM_OPL *makeAdlibOPL(int rate) { - // We need to emulate one YM3812 chip - int env_bits = FMOPL_ENV_BITS_HQ; - int eg_ent = FMOPL_EG_ENT_HQ; - - OPLBuildTables(env_bits, eg_ent); - return OPLCreate(OPL_TYPE_YM3812, 3579545, rate); -} - |