| Age | Commit message (Collapse) | Author |
|---|
|
It was pointed out to me recently that vldoor_e has enum values
named 'open' and 'close'. These can potentially conflict with POSIX
standard functions that have the same names, if the right header
files are included.
This doesn't currently cause any problems. However, to avoid any
possibility of a conflict occurring if a different compiler is used,
add a vld_ prefix to all the enum values, to namespace them.
|
|
If using one of the Freedoom IWADs, detect it by checking for the
FREEDOOM lump, and then load its DEHACKED lump to apply the
cosmetic string changes that it includes. In case we're using an old
version of one of the Freedoom IWADs, don't bomb out with an error
while parsing the DEHACKED lump.
|
|
Magic comments allow some of the Vanilla limits to be overridden, but
they should only apply to the files in which they were defined. Reset
the flag variables that control these overrides before every new
Dehacked file is parsed, so that a flag set in one file cannot spill
over into other files that are parsed subsequently.
|
|
The Dehacked code must pass a special flag to DEH_ReadLine() when
parsing the [STRINGS] section, so that lines can be escaped onto
following lines. However, this flag value was calculated incorrectly.
The BEX [STRINGS] section cannot be looked up at the start of
parsing a Dehacked file, because GetSectionByName() will return
NULL for it (extended strings are not available yet). Instead,
simplify the logic to look at the name of the current section and
check that way.
|
|
|
|
- restructure DEH_ReadLine() to avoid use of "goto"
- bex_string_t type name ends in "_t"
- declare constant table as "static const"
- add magic comment *allow-extended-strings* and corresponding
variable deh_allow_extended_strings
- fix logical error when no [STRINGS] section is registered to which
corrent_section could be compared
|
|
|
|
The Buffalo Classic USB Gamepad is a USB gamepad that resembles the
classic SNES controller. Thansk to Fabian Greffrath for sending in
the report.
|
|
Thanks to "Absolute Zero" for the report with the gamepad settings.
|
|
|
|
The XBOX One controller apparently appears identical to the Xbox
360 controller. Thanks Brad Harding.
|
|
Somebody broke this by using sizeof() on a malloc'd char *
|
|
|
|
|
|
|
|
apparently, this has been forgotten before, so DEH_PointerInit()
was not executed which meant that *some* DEHACKED patches
would not work when loaded from within a PWAD but would work
when extracted from that WAD and loaded via -deh.
fixes #421
|
|
Thanks valgrind!
|
|
This fixes conflicting array sizes for the variable "spechit" as
reported in https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=748393.
Fixes #414
|
|
Ignore some more autogenerated files
|
|
|
|
The same icon is used for all four games, even though it's designed to
resemble Doom's logo and looks a bit silly with all of them lined up.
Also the Setup Desktop Entry now only launches chocolate-setup, which
then prompts for the game to configure. This avoids cluttering up a
DE's Preferences menu, control panel, or however it will be displayed.
|
|
The Xbox360 controller is handled differently by different
operating systems, and the layout is different on Linux to Windows.
Detect the Linux layout and set some appropriate defaults.
|
|
Reduce the width slightly (the previous size was excessively wide) and
tweak "none" string to match the joystick button widget.
|
|
Only init the joystick subsystem when we need to call the joystick
API functions, and quit the subsystem when we are finished. This avoids
conflicts with the joystick widgets that quit the subsystem while the
main code relies on it running.
This fixes a bug where trying to calibrate the joystick twice would
fail on the second attempt.
|
|
Move code for configuring joystick axes into a separate widget, and
add axis widgets to the configuration window for all possible movement.
|
|
A negative time division file indicates the MIDI file uses SMPTE time
rather than the normal time system. This is not supported yet, but for
the time being, return a sensible time division value that doesn't
cause the sound to stutter and the game to become unplayable.
This fixes #352, although the affected MIDIs do not yet play properly.
|
|
|
|
Fix compilation error with Clang
|
|
hexen: Fix desync of demo1 on some platforms/compilers
|
|
|
|
Multi-track MIDI files are played back using separate callback chains
for each track, and this introduces the possibility of one track
becoming out of sync with the others. This was noticeable in WADs
that use multi-track MIDIs, such as Alien Vendetta. Increase the
timing resolution to microsecond precision to fix this.
|
|
When the tempo is changed, the times on all active timers must be
adjusted to match the new timing values. Add an API to do this and
invoke it when a tempo change meta event is read.
|
|
Official release of Hexen's source code relies on unspecified behavior the in order of function's argument evaluation, see ISO-IEC 9899-1999, [6.5.2.2.10]
P_Random() are called in different parameters of P_SpawnMobj() within A_LeafSpawn()
|
|
No more 'control may reach end of non-void function' error
|
|
For substitute music files we want to be able to specify relative
paths in a platform-independent way using Unix path separators.
Replace Unix-style / separators in the path that was read with the
path separator for the native system.
|
|
|
|
The MIDI format includes a special meta event to set the tempo of
playback, and some WADs depend on this - notably the music in Alien
Vendetta. Move the variables controlling tempo to the global scope
(they are not per-track as I previously thought) and set when the
tempo events are encountered.
This is some progress towards resolving #334, but that bug is not
yet completely fixed, because the tempo change does not
retroactively apply to OPL timers that have already been set.
|
|
Some MIDI files, such as the music tracks in AV.wad, use a second
"key on" event with a volume of zero to mean "key off". Handle this
case correctly.
|
|
Recognise the Xbox360 controller and Logitech Dual Action controllers
and set defaults as appropriate. Thanks to Brad Harding for the
information about these controllers.
|
|
This change rewrites and simplifies the copyright headers at the top
of all source files:
* Remove "Emacs style mode select" line; this line was included in
the headers for the originally released source files and appears
to be to set the file type for old versions of Emacs. I'm not sure
entirely why it was required but I don't think it is any more.
* Remove "You should have received a copy of..." text from copyright
header. This refers to the old 59 Temple Place address where the
FSF headquarters used to be located and is no longer correct.
Rather than change to the new address, just remove the paragraph
as it is superfluous anyway. This fixes #311.
* Remove ---- separator lines so that the file headers are barer
and more simplified.
|
|
Allow comments to be attached to the end of configuration lines, as
well as being specified on a line on their own.
|
|
The Wii remote is not a HID device, meaning it cannot be supported in
a proper cross-platform way. However, it can be supported for
individual platforms. Add a fingerprint and configuration for a Wii
remote under OS X using the WJoy tool.
|
|
When setting a joystick button binding to -1 to disable it, set it
directly; do not go through to the physical button mapping layer.
Also add a quick note to encourage users to send in details of their
gamepads.
|
|
Detect certain gamepads by name and automatically configure defaults
for buttons and axes, to minimize setup time. Supported so far are
the PS3 controller and AIRFLO gamepad.
|
|
|
|
If the user has just successfully calibrated the joystick, then
turn on use_joystick as a convenience feature.
|
|
The previous change to add the poll method to the music module
interface introduced a crash, as the OPL music struct does not
define a poll method.
|
|
The code is already in place for this but there was no control in
the setup tool to configure it.
|
|
Re-word some of the documentation for the joystick button config
variables, to avoid confusion between physical/virtual joystick
buttons.
|
|
Refactor how joystick buttons are reassigned. Define a fixed
mapping from joyb* variables to virtual buttons, and change the
button assignments at the virtual->physical mapping level.
|
