diff options
Diffstat (limited to 'frontend')
| -rw-r--r-- | frontend/libretro.c | 196 | ||||
| -rwxr-xr-x | frontend/libretro.h | 2552 | ||||
| -rw-r--r-- | frontend/libretro_core_options.h | 902 |
3 files changed, 1039 insertions, 2611 deletions
diff --git a/frontend/libretro.c b/frontend/libretro.c index 992da60..45c4c9c 100644 --- a/frontend/libretro.c +++ b/frontend/libretro.c @@ -33,7 +33,9 @@ #include "plugin_lib.h" #include "arm_features.h" #include "revision.h" -#include "libretro.h" + +#include <libretro.h> +#include "libretro_core_options.h" #ifdef _3DS #include "3ds/3ds_utils.h" @@ -75,6 +77,7 @@ static bool found_bios; static bool display_internal_fps = false; static unsigned frame_count = 0; static bool libretro_supports_bitmasks = false; +static int show_advanced_gpu_peops_settings = -1; static unsigned previous_width = 0; static unsigned previous_height = 0; @@ -485,65 +488,12 @@ void out_register_libretro(struct out_driver *drv) /* libretro */ void retro_set_environment(retro_environment_t cb) { - static const struct retro_variable vars[] = { - { "pcsx_rearmed_frameskip", "Frameskip; 0|1|2|3" }, - { "pcsx_rearmed_bios", "Use BIOS; auto|HLE" }, - { "pcsx_rearmed_region", "Region; auto|NTSC|PAL" }, - { "pcsx_rearmed_memcard2", "Enable second memory card; disabled|enabled" }, - { "pcsx_rearmed_pad1type", "Pad 1 Type; standard|analog|dualshock|negcon|none" }, - { "pcsx_rearmed_pad2type", "Pad 2 Type; standard|analog|dualshock|negcon|none" }, - { "pcsx_rearmed_pad3type", "Pad 3 Type; none|standard|analog|dualshock|negcon" }, - { "pcsx_rearmed_pad4type", "Pad 4 Type; none|standard|analog|dualshock|negcon" }, - { "pcsx_rearmed_pad5type", "Pad 5 Type; none|standard|analog|dualshock|negcon" }, - { "pcsx_rearmed_pad6type", "Pad 6 Type; none|standard|analog|dualshock|negcon" }, - { "pcsx_rearmed_pad7type", "Pad 7 Type; none|standard|analog|dualshock|negcon" }, - { "pcsx_rearmed_pad8type", "Pad 8 Type; none|standard|analog|dualshock|negcon" }, - { "pcsx_rearmed_multitap1", "Multitap 1; auto|disabled|enabled" }, - { "pcsx_rearmed_multitap2", "Multitap 2; auto|disabled|enabled" }, - { "pcsx_rearmed_negcon_deadzone", "NegCon Twist Deadzone (percent); 0|5|10|15|20|25|30" }, - { "pcsx_rearmed_negcon_response", "NegCon Twist Response; linear|quadratic|cubic" }, - { "pcsx_rearmed_vibration", "Enable Vibration; enabled|disabled" }, - { "pcsx_rearmed_dithering", "Enable Dithering; enabled|disabled" }, -#ifndef DRC_DISABLE - { "pcsx_rearmed_drc", "Dynamic recompiler; enabled|disabled" }, -#ifdef HAVE_PRE_ARMV7 - { "pcsx_rearmed_psxclock", "PSX cpu clock (default 50); 50|51|52|53|54|55|5657|58|59|60|61|62|63|64|65|66|67|68|69|70|71|72|73|74|75|76|77|78|79|80|81|82|83|84|85|86|87|88|89|90|91|92|93|94|95|96|97|98|99|100|30|31|32|33|34|35|36|37|38|39|40|41|42|43|44|45|46|47|48|49" }, -#else - { "pcsx_rearmed_psxclock", "PSX cpu clock (default 57); 57|58|59|60|61|62|63|64|65|66|67|68|69|70|71|72|73|74|75|76|77|78|79|80|81|82|83|84|85|86|87|88|89|90|91|92|93|94|95|96|97|98|99|100|30|31|32|33|34|35|36|37|38|39|40|41|42|43|44|45|46|47|48|49|50|51|52|53|54|55|56" }, -#endif -#endif -#ifdef __ARM_NEON__ - { "pcsx_rearmed_neon_interlace_enable", "Enable interlacing mode(s); disabled|enabled" }, - { "pcsx_rearmed_neon_enhancement_enable", "Enhanced resolution (slow); disabled|enabled" }, - { "pcsx_rearmed_neon_enhancement_no_main", "Enhanced resolution speed hack; disabled|enabled" }, -#endif - { "pcsx_rearmed_duping_enable", "Frame duping; enabled|disabled" }, - { "pcsx_rearmed_display_internal_fps", "Display Internal FPS; disabled|enabled" }, - { "pcsx_rearmed_show_bios_bootlogo", "Show Bios Bootlogo(Breaks some games); disabled|enabled" }, - { "pcsx_rearmed_spu_reverb", "Sound: Reverb; enabled|disabled" }, - { "pcsx_rearmed_spu_interpolation", "Sound: Interpolation; simple|gaussian|cubic|off" }, - { "pcsx_rearmed_idiablofix", "Diablo Music Fix; disabled|enabled" }, - { "pcsx_rearmed_pe2_fix", "Parasite Eve 2/Vandal Hearts 1/2 Fix; disabled|enabled" }, - { "pcsx_rearmed_inuyasha_fix", "InuYasha Sengoku Battle Fix; disabled|enabled" }, - - /* Advance options */ - { "pcsx_rearmed_noxadecoding", "XA Decoding; enabled|disabled" }, - { "pcsx_rearmed_nocdaudio", "CD Audio; enabled|disabled" }, -#ifndef DRC_DISABLE - { "pcsx_rearmed_nosmccheck", "(Speed Hack) Disable SMC Checks; disabled|enabled" }, - { "pcsx_rearmed_gteregsunneeded", "(Speed Hack) Assume GTE Regs Unneeded; disabled|enabled" }, - { "pcsx_rearmed_nogteflags", "(Speed Hack) Disable GTE Flags; disabled|enabled" }, -#endif - - { NULL, NULL } - }; - - if (cb(RETRO_ENVIRONMENT_GET_LOG_INTERFACE, &logging)) - log_cb = logging.log; - environ_cb = cb; - cb(RETRO_ENVIRONMENT_SET_VARIABLES, (void*)vars); + if (cb(RETRO_ENVIRONMENT_GET_LOG_INTERFACE, &logging)) + log_cb = logging.log; + + libretro_set_core_options(environ_cb); } void retro_set_video_refresh(retro_video_refresh_t cb) { video_cb = cb; } @@ -1411,6 +1361,7 @@ static void update_variables(bool in_flight) { struct retro_variable var; int i; + int gpu_peops_fix = 0; var.value = NULL; var.key = "pcsx_rearmed_frameskip"; @@ -1682,6 +1633,132 @@ static void update_variables(bool in_flight) } #endif +#ifdef DRC_DISABLE + var.value = "NULL"; + var.key = "pcsx_rearmed_gpu_peops_fix_0"; + + if (environ_cb(RETRO_ENVIRONMENT_GET_VARIABLE, &var) && var.value) + { + if (strcmp(var.value, "enabled") == 0) + gpu_peops_fix |= (1 << 0); + } + + var.value = "NULL"; + var.key = "pcsx_rearmed_gpu_peops_fix_1"; + + if (environ_cb(RETRO_ENVIRONMENT_GET_VARIABLE, &var) && var.value) + { + if (strcmp(var.value, "enabled") == 0) + gpu_peops_fix |= (1 << 1); + } + + var.value = "NULL"; + var.key = "pcsx_rearmed_gpu_peops_fix_2"; + + if (environ_cb(RETRO_ENVIRONMENT_GET_VARIABLE, &var) && var.value) + { + if (strcmp(var.value, "enabled") == 0) + gpu_peops_fix |= (1 << 2); + } + + var.value = "NULL"; + var.key = "pcsx_rearmed_gpu_peops_fix_3"; + + if (environ_cb(RETRO_ENVIRONMENT_GET_VARIABLE, &var) && var.value) + { + if (strcmp(var.value, "enabled") == 0) + gpu_peops_fix |= (1 << 3); + } + + var.value = "NULL"; + var.key = "pcsx_rearmed_gpu_peops_fix_6"; + + if (environ_cb(RETRO_ENVIRONMENT_GET_VARIABLE, &var) && var.value) + { + if (strcmp(var.value, "enabled") == 0) + gpu_peops_fix |= (1 << 6); + } + + var.value = "NULL"; + var.key = "pcsx_rearmed_gpu_peops_fix_7"; + + if (environ_cb(RETRO_ENVIRONMENT_GET_VARIABLE, &var) && var.value) + { + if (strcmp(var.value, "enabled") == 0) + gpu_peops_fix |= (1 << 7); + } + + var.value = "NULL"; + var.key = "pcsx_rearmed_gpu_peops_fix_8"; + + if (environ_cb(RETRO_ENVIRONMENT_GET_VARIABLE, &var) && var.value) + { + if (strcmp(var.value, "enabled") == 0) + gpu_peops_fix |= (1 << 8); + } + + var.value = "NULL"; + var.key = "pcsx_rearmed_gpu_peops_fix_9"; + + if (environ_cb(RETRO_ENVIRONMENT_GET_VARIABLE, &var) && var.value) + { + if (strcmp(var.value, "enabled") == 0) + gpu_peops_fix |= (1 << 9); + } + + var.value = "NULL"; + var.key = "pcsx_rearmed_gpu_peops_fix_10"; + + if (environ_cb(RETRO_ENVIRONMENT_GET_VARIABLE, &var) && var.value) + { + if (strcmp(var.value, "enabled") == 0) + gpu_peops_fix |= (1 << 10); + } + + if (pl_rearmed_cbs.gpu_peops.dwActFixes != gpu_peops_fix) + pl_rearmed_cbs.gpu_peops.dwActFixes = gpu_peops_fix; + + + /* Show/hide core options */ + + var.key = "pcsx_rearmed_show_gpu_peops_settings"; + var.value = NULL; + + if (environ_cb(RETRO_ENVIRONMENT_GET_VARIABLE, &var) && var.value) + { + int show_advanced_gpu_peops_settings_prev = show_advanced_gpu_peops_settings; + + show_advanced_gpu_peops_settings = 1; + if (strcmp(var.value, "disabled") == 0) + show_advanced_gpu_peops_settings = 0; + + if (show_advanced_gpu_peops_settings != show_advanced_gpu_peops_settings_prev) + { + unsigned i; + struct retro_core_option_display option_display; + char gpu_peops_option[9][32] = { + "pcsx_rearmed_gpu_peops_fix_0", + "pcsx_rearmed_gpu_peops_fix_1", + "pcsx_rearmed_gpu_peops_fix_2", + "pcsx_rearmed_gpu_peops_fix_3", + "pcsx_rearmed_gpu_peops_fix_6", + "pcsx_rearmed_gpu_peops_fix_7", + "pcsx_rearmed_gpu_peops_fix_8", + "pcsx_rearmed_gpu_peops_fix_9", + "pcsx_rearmed_gpu_peops_fix_10", + }; + + option_display.visible = show_advanced_gpu_peops_settings; + + for (i = 0; i < 9; i++) + { + option_display.key = gpu_peops_option[i]; + environ_cb(RETRO_ENVIRONMENT_SET_CORE_OPTIONS_DISPLAY, &option_display); + } + } + } +#endif + if (in_flight) { // inform core things about possible config changes plugin_call_rearmed_cbs(); @@ -1809,7 +1886,7 @@ void retro_run(void) if (in_type[i] == PSE_PAD_TYPE_NONE) continue; - + if (libretro_supports_bitmasks) ret = input_state_cb(i, RETRO_DEVICE_JOYPAD, 0, RETRO_DEVICE_ID_JOYPAD_MASK); else @@ -2172,6 +2249,7 @@ void retro_init(void) cycle_multiplier = 200; #endif pl_rearmed_cbs.gpu_peops.iUseDither = 1; + pl_rearmed_cbs.gpu_peops.dwActFixes = 1 << 7; spu_config.iUseFixedUpdates = 1; SaveFuncs.open = save_open; diff --git a/frontend/libretro.h b/frontend/libretro.h deleted file mode 100755 index 8daec83..0000000 --- a/frontend/libretro.h +++ /dev/null @@ -1,2552 +0,0 @@ -/* Copyright (C) 2010-2018 The RetroArch team - * - * --------------------------------------------------------------------------------------- - * The following license statement only applies to this libretro API header (libretro.h). - * --------------------------------------------------------------------------------------- - * - * Permission is hereby granted, free of charge, - * to any person obtaining a copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation the rights to - * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, - * and to permit persons to whom the Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, - * INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. - * IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - */ - -#ifndef LIBRETRO_H__ -#define LIBRETRO_H__ - -#include <stdint.h> -#include <stddef.h> -#include <limits.h> - -#ifdef __cplusplus -extern "C" { -#endif - -#ifndef __cplusplus -#if defined(_MSC_VER) && _MSC_VER < 1800 && !defined(SN_TARGET_PS3) -/* Hack applied for MSVC when compiling in C89 mode - * as it isn't C99-compliant. */ -#define bool unsigned char -#define true 1 -#define false 0 -#else -#include <stdbool.h> -#endif -#endif - -#ifndef RETRO_CALLCONV -# if defined(__GNUC__) && defined(__i386__) && !defined(__x86_64__) -# define RETRO_CALLCONV __attribute__((cdecl)) -# elif defined(_MSC_VER) && defined(_M_X86) && !defined(_M_X64) -# define RETRO_CALLCONV __cdecl -# else -# define RETRO_CALLCONV /* all other platforms only have one calling convention each */ -# endif -#endif - -#ifndef RETRO_API -# if defined(_WIN32) || defined(__CYGWIN__) || defined(__MINGW32__) -# ifdef RETRO_IMPORT_SYMBOLS -# ifdef __GNUC__ -# define RETRO_API RETRO_CALLCONV __attribute__((__dllimport__)) -# else -# define RETRO_API RETRO_CALLCONV __declspec(dllimport) -# endif -# else -# ifdef __GNUC__ -# define RETRO_API RETRO_CALLCONV __attribute__((__dllexport__)) -# else -# define RETRO_API RETRO_CALLCONV __declspec(dllexport) -# endif -# endif -# else -# if defined(__GNUC__) && __GNUC__ >= 4 && !defined(__CELLOS_LV2__) -# define RETRO_API RETRO_CALLCONV __attribute__((__visibility__("default"))) -# else -# define RETRO_API RETRO_CALLCONV -# endif -# endif -#endif - -/* Used for checking API/ABI mismatches that can break libretro - * implementations. - * It is not incremented for compatible changes to the API. - */ -#define RETRO_API_VERSION 1 - -/* - * Libretro's fundamental device abstractions. - * - * Libretro's input system consists of some standardized device types, - * such as a joypad (with/without analog), mouse, keyboard, lightgun - * and a pointer. - * - * The functionality of these devices are fixed, and individual cores - * map their own concept of a controller to libretro's abstractions. - * This makes it possible for frontends to map the abstract types to a - * real input device, and not having to worry about binding input - * correctly to arbitrary controller layouts. - */ - -#define RETRO_DEVICE_TYPE_SHIFT 8 -#define RETRO_DEVICE_MASK ((1 << RETRO_DEVICE_TYPE_SHIFT) - 1) -#define RETRO_DEVICE_SUBCLASS(base, id) (((id + 1) << RETRO_DEVICE_TYPE_SHIFT) | base) - -/* Input disabled. */ -#define RETRO_DEVICE_NONE 0 - -/* The JOYPAD is called RetroPad. It is essentially a Super Nintendo - * controller, but with additional L2/R2/L3/R3 buttons, similar to a - * PS1 DualShock. */ -#define RETRO_DEVICE_JOYPAD 1 - -/* The mouse is a simple mouse, similar to Super Nintendo's mouse. - * X and Y coordinates are reported relatively to last poll (poll callback). - * It is up to the libretro implementation to keep track of where the mouse - * pointer is supposed to be on the screen. - * The frontend must make sure not to interfere with its own hardware - * mouse pointer. - */ -#define RETRO_DEVICE_MOUSE 2 - -/* KEYBOARD device lets one poll for raw key pressed. - * It is poll based, so input callback will return with the current - * pressed state. - * For event/text based keyboard input, see - * RETRO_ENVIRONMENT_SET_KEYBOARD_CALLBACK. - */ -#define RETRO_DEVICE_KEYBOARD 3 - -/* LIGHTGUN device is similar to Guncon-2 for PlayStation 2. - * It reports X/Y coordinates in screen space (similar to the pointer) - * in the range [-0x8000, 0x7fff] in both axes, with zero being center and - * -0x8000 being out of bounds. - * As well as reporting on/off screen state. It features a trigger, - * start/select buttons, auxiliary action buttons and a - * directional pad. A forced off-screen shot can be requested for - * auto-reloading function in some games. - */ -#define RETRO_DEVICE_LIGHTGUN 4 - -/* The ANALOG device is an extension to JOYPAD (RetroPad). - * Similar to DualShock2 it adds two analog sticks and all buttons can - * be analog. This is treated as a separate device type as it returns - * axis values in the full analog range of [-0x7fff, 0x7fff], - * although some devices may return -0x8000. - * Positive X axis is right. Positive Y axis is down. - * Buttons are returned in the range [0, 0x7fff]. - * Only use ANALOG type when polling for analog values. - */ -#define RETRO_DEVICE_ANALOG 5 - -/* Abstracts the concept of a pointing mechanism, e.g. touch. - * This allows libretro to query in absolute coordinates where on the - * screen a mouse (or something similar) is being placed. - * For a touch centric device, coordinates reported are the coordinates - * of the press. - * - * Coordinates in X and Y are reported as: - * [-0x7fff, 0x7fff]: -0x7fff corresponds to the far left/top of the screen, - * and 0x7fff corresponds to the far right/bottom of the screen. - * The "screen" is here defined as area that is passed to the frontend and - * later displayed on the monitor. - * - * The frontend is free to scale/resize this screen as it sees fit, however, - * (X, Y) = (-0x7fff, -0x7fff) will correspond to the top-left pixel of the - * game image, etc. - * - * To check if the pointer coordinates are valid (e.g. a touch display - * actually being touched), PRESSED returns 1 or 0. - * - * If using a mouse on a desktop, PRESSED will usually correspond to the - * left mouse button, but this is a frontend decision. - * PRESSED will only return 1 if the pointer is inside the game screen. - * - * For multi-touch, the index variable can be used to successively query - * more presses. - * If index = 0 returns true for _PRESSED, coordinates can be extracted - * with _X, _Y for index = 0. One can then query _PRESSED, _X, _Y with - * index = 1, and so on. - * Eventually _PRESSED will return false for an index. No further presses - * are registered at this point. */ -#define RETRO_DEVICE_POINTER 6 - -/* Buttons for the RetroPad (JOYPAD). - * The placement of these is equivalent to placements on the - * Super Nintendo controller. - * L2/R2/L3/R3 buttons correspond to the PS1 DualShock. - * Also used as id values for RETRO_DEVICE_INDEX_ANALOG_BUTTON */ -#define RETRO_DEVICE_ID_JOYPAD_B 0 -#define RETRO_DEVICE_ID_JOYPAD_Y 1 -#define RETRO_DEVICE_ID_JOYPAD_SELECT 2 -#define RETRO_DEVICE_ID_JOYPAD_START 3 -#define RETRO_DEVICE_ID_JOYPAD_UP 4 -#define RETRO_DEVICE_ID_JOYPAD_DOWN 5 -#define RETRO_DEVICE_ID_JOYPAD_LEFT 6 -#define RETRO_DEVICE_ID_JOYPAD_RIGHT 7 -#define RETRO_DEVICE_ID_JOYPAD_A 8 -#define RETRO_DEVICE_ID_JOYPAD_X 9 -#define RETRO_DEVICE_ID_JOYPAD_L 10 -#define RETRO_DEVICE_ID_JOYPAD_R 11 -#define RETRO_DEVICE_ID_JOYPAD_L2 12 -#define RETRO_DEVICE_ID_JOYPAD_R2 13 -#define RETRO_DEVICE_ID_JOYPAD_L3 14 -#define RETRO_DEVICE_ID_JOYPAD_R3 15 - -#define RETRO_DEVICE_ID_JOYPAD_MASK 256 - -/* Index / Id values for ANALOG device. */ -#define RETRO_DEVICE_INDEX_ANALOG_LEFT 0 -#define RETRO_DEVICE_INDEX_ANALOG_RIGHT 1 -#define RETRO_DEVICE_INDEX_ANALOG_BUTTON 2 -#define RETRO_DEVICE_ID_ANALOG_X 0 -#define RETRO_DEVICE_ID_ANALOG_Y 1 - -/* Id values for MOUSE. */ -#define RETRO_DEVICE_ID_MOUSE_X 0 -#define RETRO_DEVICE_ID_MOUSE_Y 1 -#define RETRO_DEVICE_ID_MOUSE_LEFT 2 -#define RETRO_DEVICE_ID_MOUSE_RIGHT 3 -#define RETRO_DEVICE_ID_MOUSE_WHEELUP 4 -#define RETRO_DEVICE_ID_MOUSE_WHEELDOWN 5 -#define RETRO_DEVICE_ID_MOUSE_MIDDLE 6 -#define RETRO_DEVICE_ID_MOUSE_HORIZ_WHEELUP 7 -#define RETRO_DEVICE_ID_MOUSE_HORIZ_WHEELDOWN 8 -#define RETRO_DEVICE_ID_MOUSE_BUTTON_4 9 -#define RETRO_DEVICE_ID_MOUSE_BUTTON_5 10 - -/* Id values for LIGHTGUN. */ -#define RETRO_DEVICE_ID_LIGHTGUN_SCREEN_X 13 /*Absolute Position*/ -#define RETRO_DEVICE_ID_LIGHTGUN_SCREEN_Y 14 /*Absolute*/ -#define RETRO_DEVICE_ID_LIGHTGUN_IS_OFFSCREEN 15 /*Status Check*/ -#define RETRO_DEVICE_ID_LIGHTGUN_TRIGGER 2 -#define RETRO_DEVICE_ID_LIGHTGUN_RELOAD 16 /*Forced off-screen shot*/ -#define RETRO_DEVICE_ID_LIGHTGUN_AUX_A 3 -#define RETRO_DEVICE_ID_LIGHTGUN_AUX_B 4 -#define RETRO_DEVICE_ID_LIGHTGUN_START 6 -#define RETRO_DEVICE_ID_LIGHTGUN_SELECT 7 -#define RETRO_DEVICE_ID_LIGHTGUN_AUX_C 8 -#define RETRO_DEVICE_ID_LIGHTGUN_DPAD_UP 9 -#define RETRO_DEVICE_ID_LIGHTGUN_DPAD_DOWN 10 -#define RETRO_DEVICE_ID_LIGHTGUN_DPAD_LEFT 11 -#define RETRO_DEVICE_ID_LIGHTGUN_DPAD_RIGHT 12 -/* deprecated */ -#define RETRO_DEVICE_ID_LIGHTGUN_X 0 /*Relative Position*/ -#define RETRO_DEVICE_ID_LIGHTGUN_Y 1 /*Relative*/ -#define RETRO_DEVICE_ID_LIGHTGUN_CURSOR 3 /*Use Aux:A*/ -#define RETRO_DEVICE_ID_LIGHTGUN_TURBO 4 /*Use Aux:B*/ -#define RETRO_DEVICE_ID_LIGHTGUN_PAUSE 5 /*Use Start*/ - -/* Id values for POINTER. */ -#define RETRO_DEVICE_ID_POINTER_X 0 -#define RETRO_DEVICE_ID_POINTER_Y 1 -#define RETRO_DEVICE_ID_POINTER_PRESSED 2 -#define RETRO_DEVICE_ID_POINTER_COUNT 3 - -/* Returned from retro_get_region(). */ -#define RETRO_REGION_NTSC 0 -#define RETRO_REGION_PAL 1 - -/* Id values for LANGUAGE */ -enum retro_language -{ - RETRO_LANGUAGE_ENGLISH = 0, - RETRO_LANGUAGE_JAPANESE = 1, - RETRO_LANGUAGE_FRENCH = 2, - RETRO_LANGUAGE_SPANISH = 3, - RETRO_LANGUAGE_GERMAN = 4, - RETRO_LANGUAGE_ITALIAN = 5, - RETRO_LANGUAGE_DUTCH = 6, - RETRO_LANGUAGE_PORTUGUESE_BRAZIL = 7, - RETRO_LANGUAGE_PORTUGUESE_PORTUGAL = 8, - RETRO_LANGUAGE_RUSSIAN = 9, - RETRO_LANGUAGE_KOREAN = 10, - RETRO_LANGUAGE_CHINESE_TRADITIONAL = 11, - RETRO_LANGUAGE_CHINESE_SIMPLIFIED = 12, - RETRO_LANGUAGE_ESPERANTO = 13, - RETRO_LANGUAGE_POLISH = 14, - RETRO_LANGUAGE_VIETNAMESE = 15, - RETRO_LANGUAGE_ARABIC = 16, - RETRO_LANGUAGE_GREEK = 17, - RETRO_LANGUAGE_TURKISH = 18, - RETRO_LANGUAGE_LAST, - - /* Ensure sizeof(enum) == sizeof(int) */ - RETRO_LANGUAGE_DUMMY = INT_MAX -}; - -/* Passed to retro_get_memory_data/size(). - * If the memory type doesn't apply to the - * implementation NULL/0 can be returned. - */ -#define RETRO_MEMORY_MASK 0xff - -/* Regular save RAM. This RAM is usually found on a game cartridge, - * backed up by a battery. - * If save game data is too complex for a single memory buffer, - * the SAVE_DIRECTORY (preferably) or SYSTEM_DIRECTORY environment - * callback can be used. */ -#define RETRO_MEMORY_SAVE_RAM 0 - -/* Some games have a built-in clock to keep track of time. - * This memory is usually just a couple of bytes to keep track of time. - */ -#define RETRO_MEMORY_RTC 1 - -/* System ram lets a frontend peek into a game systems main RAM. */ -#define RETRO_MEMORY_SYSTEM_RAM 2 - -/* Video ram lets a frontend peek into a game systems video RAM (VRAM). */ -#define RETRO_MEMORY_VIDEO_RAM 3 - -/* Keysyms used for ID in input state callback when polling RETRO_KEYBOARD. */ -enum retro_key -{ - RETROK_UNKNOWN = 0, - RETROK_FIRST = 0, - RETROK_BACKSPACE = 8, - RETROK_TAB = 9, - RETROK_CLEAR = 12, - RETROK_RETURN = 13, - RETROK_PAUSE = 19, - RETROK_ESCAPE = 27, - RETROK_SPACE = 32, - RETROK_EXCLAIM = 33, - RETROK_QUOTEDBL = 34, - RETROK_HASH = 35, - RETROK_DOLLAR = 36, - RETROK_AMPERSAND = 38, - RETROK_QUOTE = 39, - RETROK_LEFTPAREN = 40, - RETROK_RIGHTPAREN = 41, - RETROK_ASTERISK = 42, - RETROK_PLUS = 43, - RETROK_COMMA = 44, - RETROK_MINUS = 45, - RETROK_PERIOD = 46, - RETROK_SLASH = 47, - RETROK_0 = 48, - RETROK_1 = 49, - RETROK_2 = 50, - RETROK_3 = 51, - RETROK_4 = 52, - RETROK_5 = 53, - RETROK_6 = 54, - RETROK_7 = 55, - RETROK_8 = 56, - RETROK_9 = 57, - RETROK_COLON = 58, - RETROK_SEMICOLON = 59, - RETROK_LESS = 60, - RETROK_EQUALS = 61, - RETROK_GREATER = 62, - RETROK_QUESTION = 63, - RETROK_AT = 64, - RETROK_LEFTBRACKET = 91, - RETROK_BACKSLASH = 92, - RETROK_RIGHTBRACKET = 93, - RETROK_CARET = 94, - RETROK_UNDERSCORE = 95, - RETROK_BACKQUOTE = 96, - RETROK_a = 97, - RETROK_b = 98, - RETROK_c = 99, - RETROK_d = 100, - RETROK_e = 101, - RETROK_f = 102, - RETROK_g = 103, - RETROK_h = 104, - RETROK_i = 105, - RETROK_j = 106, - RETROK_k = 107, - RETROK_l = 108, - RETROK_m = 109, - RETROK_n = 110, - RETROK_o = 111, - RETROK_p = 112, - RETROK_q = 113, - RETROK_r = 114, - RETROK_s = 115, - RETROK_t = 116, - RETROK_u = 117, - RETROK_v = 118, - RETROK_w = 119, - RETROK_x = 120, - RETROK_y = 121, - RETROK_z = 122, - RETROK_LEFTBRACE = 123, - RETROK_BAR = 124, - RETROK_RIGHTBRACE = 125, - RETROK_TILDE = 126, - RETROK_DELETE = 127, - - RETROK_KP0 = 256, - RETROK_KP1 = 257, - RETROK_KP2 = 258, - RETROK_KP3 = 259, - RETROK_KP4 = 260, - RETROK_KP5 = 261, - RETROK_KP6 = 262, - RETROK_KP7 = 263, - RETROK_KP8 = 264, - RETROK_KP9 = 265, - RETROK_KP_PERIOD = 266, - RETROK_KP_DIVIDE = 267, - RETROK_KP_MULTIPLY = 268, - RETROK_KP_MINUS = 269, - RETROK_KP_PLUS = 270, - RETROK_KP_ENTER = 271, - RETROK_KP_EQUALS = 272, - - RETROK_UP = 273, - RETROK_DOWN = 274, - RETROK_RIGHT = 275, - RETROK_LEFT = 276, - RETROK_INSERT = 277, - RETROK_HOME = 278, - RETROK_END = 279, - RETROK_PAGEUP = 280, - RETROK_PAGEDOWN = 281, - - RETROK_F1 = 282, - RETROK_F2 = 283, - RETROK_F3 = 284, - RETROK_F4 = 285, - RETROK_F5 = 286, - RETROK_F6 = 287, - RETROK_F7 = 288, - RETROK_F8 = 289, - RETROK_F9 = 290, - RETROK_F10 = 291, - RETROK_F11 = 292, - RETROK_F12 = 293, - RETROK_F13 = 294, - RETROK_F14 = 295, - RETROK_F15 = 296, - - RETROK_NUMLOCK = 300, - RETROK_CAPSLOCK = 301, - RETROK_SCROLLOCK = 302, - RETROK_RSHIFT = 303, - RETROK_LSHIFT = 304, - RETROK_RCTRL = 305, - RETROK_LCTRL = 306, - RETROK_RALT = 307, - RETROK_LALT = 308, - RETROK_RMETA = 309, - RETROK_LMETA = 310, - RETROK_LSUPER = 311, - RETROK_RSUPER = 312, - RETROK_MODE = 313, - RETROK_COMPOSE = 314, - - RETROK_HELP = 315, - RETROK_PRINT = 316, - RETROK_SYSREQ = 317, - RETROK_BREAK = 318, - RETROK_MENU = 319, - RETROK_POWER = 320, - RETROK_EURO = 321, - RETROK_UNDO = 322, - RETROK_OEM_102 = 323, - - RETROK_LAST, - - RETROK_DUMMY = INT_MAX /* Ensure sizeof(enum) == sizeof(int) */ -}; - -enum retro_mod -{ - RETROKMOD_NONE = 0x0000, - - RETROKMOD_SHIFT = 0x01, - RETROKMOD_CTRL = 0x02, - RETROKMOD_ALT = 0x04, - RETROKMOD_META = 0x08, - - RETROKMOD_NUMLOCK = 0x10, - RETROKMOD_CAPSLOCK = 0x20, - RETROKMOD_SCROLLOCK = 0x40, - - RETROKMOD_DUMMY = INT_MAX /* Ensure sizeof(enum) == sizeof(int) */ -}; - -/* If set, this call is not part of the public libretro API yet. It can - * change or be removed at any time. */ -#define RETRO_ENVIRONMENT_EXPERIMENTAL 0x10000 -/* Environment callback to be used internally in frontend. */ -#define RETRO_ENVIRONMENT_PRIVATE 0x20000 - -/* Environment commands. */ -#define RETRO_ENVIRONMENT_SET_ROTATION 1 /* const unsigned * -- - * Sets screen rotation of graphics. - * Valid values are 0, 1, 2, 3, which rotates screen by 0, 90, 180, - * 270 degrees counter-clockwise respectively. - */ -#define RETRO_ENVIRONMENT_GET_OVERSCAN 2 /* bool * -- - * NOTE: As of 2019 this callback is considered deprecated in favor of - * using core options to manage overscan in a more nuanced, core-specific way. - * - * Boolean value whether or not the implementation should use overscan, - * or crop away overscan. - */ -#define RETRO_ENVIRONMENT_GET_CAN_DUPE 3 /* bool * -- - * Boolean value whether or not frontend supports frame duping, - * passing NULL to video frame callback. - */ - - /* Environ 4, 5 are no longer supported (GET_VARIABLE / SET_VARIABLES), - * and reserved to avoid possible ABI clash. - */ - -#define RETRO_ENVIRONMENT_SET_MESSAGE 6 /* const struct retro_message * -- - * Sets a message to be displayed in implementation-specific manner - * for a certain amount of 'frames'. - * Should not be used for trivial messages, which should simply be - * logged via RETRO_ENVIRONMENT_GET_LOG_INTERFACE (or as a - * fallback, stderr). - */ -#define RETRO_ENVIRONMENT_SHUTDOWN 7 /* N/A (NULL) -- - * Requests the frontend to shutdown. - * Should only be used if game has a specific - * way to shutdown the game from a menu item or similar. - */ -#define RETRO_ENVIRONMENT_SET_PERFORMANCE_LEVEL 8 - /* const unsigned * -- - * Gives a hint to the frontend how demanding this implementation - * is on a system. E.g. reporting a level of 2 means - * this implementation should run decently on all frontends - * of level 2 and up. - * - * It can be used by the frontend to potentially warn - * about too demanding implementations. - * - * The levels are "floating". - * - * This function can be called on a per-game basis, - * as certain games an implementation can play might be - * particularly demanding. - * If called, it should be called in retro_load_game(). - */ -#define RETRO_ENVIRONMENT_GET_SYSTEM_DIRECTORY 9 - /* const char ** -- - * Returns the "system" directory of the frontend. - * This directory can be used to store system specific - * content such as BIOSes, configuration data, etc. - * The returned value can be NULL. - * If so, no such directory is defined, - * and it's up to the implementation to find a suitable directory. - * - * NOTE: Some cores used this folder also for "save" data such as - * memory cards, etc, for lack of a better place to put it. - * This is now discouraged, and if possible, cores should try to - * use the new GET_SAVE_DIRECTORY. - */ -#define RETRO_ENVIRONMENT_SET_PIXEL_FORMAT 10 - /* const enum retro_pixel_format * -- - * Sets the internal pixel format used by the implementation. - * The default pixel format is RETRO_PIXEL_FORMAT_0RGB1555. - * This pixel format however, is deprecated (see enum retro_pixel_format). - * If the call returns false, the frontend does not support this pixel - * format. - * - * This function should be called inside retro_load_game() or - * retro_get_system_av_info(). - */ -#define RETRO_ENVIRONMENT_SET_INPUT_DESCRIPTORS 11 - /* const struct retro_input_descriptor * -- - * Sets an array of retro_input_descriptors. - * It is up to the frontend to present this in a usable way. - * The array is terminated by retro_input_descriptor::description - * being set to NULL. - * This function can be called at any time, but it is recommended - * to call it as early as possible. - */ -#define RETRO_ENVIRONMENT_SET_KEYBOARD_CALLBACK 12 - /* const struct retro_keyboard_callback * -- - * Sets a callback function used to notify core about keyboard events. - */ -#define RETRO_ENVIRONMENT_SET_DISK_CONTROL_INTERFACE 13 - /* const struct retro_disk_control_callback * -- - * Sets an interface which frontend can use to eject and insert - * disk images. - * This is used for games which consist of multiple images and - * must be manually swapped out by the user (e.g. PSX). - */ -#define RETRO_ENVIRONMENT_SET_HW_RENDER 14 - /* struct retro_hw_render_callback * -- - * Sets an interface to let a libretro core render with - * hardware acceleration. - * Should be called in retro_load_game(). - * If successful, libretro cores will be able to render to a - * frontend-provided framebuffer. - * The size of this framebuffer will be at least as large as - * max_width/max_height provided in get_av_info(). - * If HW rendering is used, pass only RETRO_HW_FRAME_BUFFER_VALID or - * NULL to retro_video_refresh_t. - */ -#define RETRO_ENVIRONMENT_GET_VARIABLE 15 - /* struct retro_variable * -- - * Interface to acquire user-defined information from environment - * that cannot feasibly be supported in a multi-system way. - * 'key' should be set to a key which has already been set by - * SET_VARIABLES. - * 'data' will be set to a value or NULL. - */ -#define RETRO_ENVIRONMENT_SET_VARIABLES 16 - /* const struct retro_variable * -- - * Allows an implementation to signal the environment - * which variables it might want to check for later using - * GET_VARIABLE. - * This allows the frontend to present these variables to - * a user dynamically. - * This should be called the first time as early as - * possible (ideally in retro_set_environment). - * Afterward it may be called again for the core to communicate - * updated options to the frontend, but the number of core - * options must not change from the number in the initial call. - * - * 'data' points to an array of retro_variable structs - * terminated by a { NULL, NULL } element. - * retro_variable::key should be namespaced to not collide - * with other implementations' keys. E.g. A core called - * 'foo' should use keys named as 'foo_option'. - * retro_variable::value should contain a human readable - * description of the key as well as a '|' delimited list - * of expected values. - * - * The number of possible options should be very limited, - * i.e. it should be feasible to cycle through options - * without a keyboard. - * - * First entry should be treated as a default. - * - * Example entry: - * { "foo_option", "Speed hack coprocessor X; false|true" } - * - * Text before first ';' is description. This ';' must be - * followed by a space, and followed by a list of possible - * values split up with '|'. - * - * Only strings are operated on. The possible values will - * generally be displayed and stored as-is by the frontend. - */ -#define RETRO_ENVIRONMENT_GET_VARIABLE_UPDATE 17 - /* bool * -- - * Result is set to true if some variables are updated by - * frontend since last call to RETRO_ENVIRONMENT_GET_VARIABLE. - * Variables should be queried with GET_VARIABLE. - */ -#define RETRO_ENVIRONMENT_SET_SUPPORT_NO_GAME 18 - /* const bool * -- - * If true, the libretro implementation supports calls to - * retro_load_game() with NULL as argument. - * Used by cores which can run without particular game data. - * This should be called within retro_set_environment() only. - */ -#define RETRO_ENVIRONMENT_GET_LIBRETRO_PATH 19 - /* const char ** -- - * Retrieves the absolute path from where this libretro - * implementation was loaded. - * NULL is returned if the libretro was loaded statically - * (i.e. linked statically to frontend), or if the path cannot be - * determined. - * Mostly useful in cooperation with SET_SUPPORT_NO_GAME as assets can - * be loaded without ugly hacks. - */ - - /* Environment 20 was an obsolete version of SET_AUDIO_CALLBACK. - * It was not used by any known core at the time, - * and was removed from the API. */ -#define RETRO_ENVIRONMENT_SET_FRAME_TIME_CALLBACK 21 - /* const struct retro_frame_time_callback * -- - * Lets the core know how much time has passed since last - * invocation of retro_run(). - * The frontend can tamper with the timing to fake fast-forward, - * slow-motion, frame stepping, etc. - * In this case the delta time will use the reference value - * in frame_time_callback.. - */ -#define RETRO_ENVIRONMENT_SET_AUDIO_CALLBACK 22 - /* const struct retro_audio_callback * -- - * Sets an interface which is used to notify a libretro core about audio - * being available for writing. - * The callback can be called from any thread, so a core using this must - * have a thread safe audio implementation. - * It is intended for games where audio and video are completely - * asynchronous and audio can be generated on the fly. - * This interface is not recommended for use with emulators which have - * highly synchronous audio. - * - * The callback only notifies about writability; the libretro core still - * has to call the normal audio callbacks - * to write audio. The audio callbacks must be called from within the - * notification callback. - * The amount of audio data to write is up to the implementation. - * Generally, the audio callback will be called continously in a loop. - * - * Due to thread safety guarantees and lack of sync between audio and - * video, a frontend can selectively disallow this interface based on - * internal configuration. A core using this interface must also - * implement the "normal" audio interface. - * - * A libretro core using SET_AUDIO_CALLBACK should also make use of - * SET_FRAME_TIME_CALLBACK. - */ -#define RETRO_ENVIRONMENT_GET_RUMBLE_INTERFACE 23 - /* struct retro_rumble_interface * -- - * Gets an interface which is used by a libretro core to set - * state of rumble motors in controllers. - * A strong and weak motor is supported, and they can be - * controlled indepedently. - */ -#define RETRO_ENVIRONMENT_GET_INPUT_DEVICE_CAPABILITIES 24 - /* uint64_t * -- - * Gets a bitmask telling which device type are expected to be - * handled properly in a call to retro_input_state_t. - * Devices which are not handled or recognized always return - * 0 in retro_input_state_t. - * Example bitmask: caps = (1 << RETRO_DEVICE_JOYPAD) | (1 << RETRO_DEVICE_ANALOG). - * Should only be called in retro_run(). - */ -#define RETRO_ENVIRONMENT_GET_SENSOR_INTERFACE (25 | RETRO_ENVIRONMENT_EXPERIMENTAL) - /* struct retro_sensor_interface * -- - * Gets access to the sensor interface. - * The purpose of this interface is to allow - * setting state related to sensors such as polling rate, - * enabling/disable it entirely, etc. - * Reading sensor state is done via the normal - * input_state_callback API. - */ -#define RETRO_ENVIRONMENT_GET_CAMERA_INTERFACE (26 | RETRO_ENVIRONMENT_EXPERIMENTAL) - /* struct retro_camera_callback * -- - * Gets an interface to a video camera driver. - * A libretro core can use this interface to get access to a - * video camera. - * New video frames are delivered in a callback in same - * thread as retro_run(). - * - * GET_CAMERA_INTERFACE should be called in retro_load_game(). - * - * Depending on the camera implementation used, camera frames - * will be delivered as a raw framebuffer, - * or as an OpenGL texture directly. - * - * The core has to tell the frontend here which types of - * buffers can be handled properly. - * An OpenGL texture can only be handled when using a - * libretro GL core (SET_HW_RENDER). - * It is recommended to use a libretro GL core when - * using camera interface. - * - * The camera is not started automatically. The retrieved start/stop - * functions must be used to explicitly - * start and stop the camera driver. - */ -#define RETRO_ENVIRONMENT_GET_LOG_INTERFACE 27 - /* struct retro_log_callback * -- - * Gets an interface for logging. This is useful for - * logging in a cross-platform way - * as certain platforms cannot use stderr for logging. - * It also allows the frontend to - * show logging information in a more suitable way. - * If this interface is not used, libretro cores should - * log to stderr as desired. - */ -#define RETRO_ENVIRONMENT_GET_PERF_INTERFACE 28 - /* struct retro_perf_callback * -- - * Gets an interface for performance counters. This is useful - * for performance logging in a cross-platform way and for detecting - * architecture-specific features, such as SIMD support. - */ -#define RETRO_ENVIRONMENT_GET_LOCATION_INTERFACE 29 - /* struct retro_location_callback * -- - * Gets access to the location interface. - * The purpose of this interface is to be able to retrieve - * location-based information from the host device, - * such as current latitude / longitude. - */ -#define RETRO_ENVIRONMENT_GET_CONTENT_DIRECTORY 30 /* Old name, kept for compatibility. */ -#define RETRO_ENVIRONMENT_GET_CORE_ASSETS_DIRECTORY 30 - /* const char ** -- - * Returns the "core assets" directory of the frontend. - * This directory can be used to store specific assets that the - * core relies upon, such as art assets, - * input data, etc etc. - * The returned value can be NULL. - * If so, no such directory is defined, - * and it's up to the implementation to find a suitable directory. - */ -#define RETRO_ENVIRONMENT_GET_SAVE_DIRECTORY 31 - /* const char ** -- - * Returns the "save" directory of the frontend, unless there is no - * save directory available. The save directory should be used to - * store SRAM, memory cards, high scores, etc, if the libretro core - * cannot use the regular memory interface (retro_get_memory_data()). - * - * If the frontend cannot designate a save directory, it will return - * NULL to indicate that the core should attempt to operate without a - * save directory set. - * - * NOTE: early libretro cores used the system directory for save - * files. Cores that need to be backwards-compatible can still check - * GET_SYSTEM_DIRECTORY. - */ -#define RETRO_ENVIRONMENT_SET_SYSTEM_AV_INFO 32 - /* const struct retro_system_av_info * -- - * Sets a new av_info structure. This can only be called from - * within retro_run(). - * This should *only* be used if the core is completely altering the - * internal resolutions, aspect ratios, timings, sampling rate, etc. - * Calling this can require a full reinitialization of video/audio - * drivers in the frontend, - * - * so it is important to call it very sparingly, and usually only with - * the users explicit consent. - * An eventual driver reinitialize will happen so that video and - * audio callbacks - * happening after this call within the same retro_run() call will - * target the newly initialized driver. - * - * This callback makes it possible to support configurable resolutions - * in games, which can be useful to - * avoid setting the "worst case" in max_width/max_height. - * - * ***HIGHLY RECOMMENDED*** Do not call this callback every time - * resolution changes in an emulator core if it's - * expected to be a temporary change, for the reasons of possible - * driver reinitialization. - * This call is not a free pass for not trying to provide - * correct values in retro_get_system_av_info(). If you need to change - * things like aspect ratio or nominal width/height, - * use RETRO_ENVIRONMENT_SET_GEOMETRY, which is a softer variant - * of SET_SYSTEM_AV_INFO. - * - * If this returns false, the frontend does not acknowledge a - * changed av_info struct. - */ -#define RETRO_ENVIRONMENT_SET_PROC_ADDRESS_CALLBACK 33 - /* const struct retro_get_proc_address_interface * -- - * Allows a libretro core to announce support for the - * get_proc_address() interface. - * This interface allows for a standard way to extend libretro where - * use of environment calls are too indirect, - * e.g. for cases where the frontend wants to call directly into the core. - * - * If a core wants to expose this interface, SET_PROC_ADDRESS_CALLBACK - * **MUST** be called from within retro_set_environment(). - */ -#define RETRO_ENVIRONMENT_SET_SUBSYSTEM_INFO 34 - /* const struct retro_subsystem_info * -- - * This environment call introduces the concept of libretro "subsystems". - * A subsystem is a variant of a libretro core which supports - * different kinds of games. - * The purpose of this is to support e.g. emulators which might - * have special needs, e.g. Super Nintendo's Super GameBoy, Sufami Turbo. - * It can also be used to pick among subsystems in an explicit way - * if the libretro implementation is a multi-system emulator itself. - * - * Loading a game via a subsystem is done with retro_load_game_special(), - * and this environment call allows a libretro core to expose which - * subsystems are supported for use with retro_load_game_special(). - * A core passes an array of retro_game_special_info which is terminated - * with a zeroed out retro_game_special_info struct. - * - * If a core wants to use this functionality, SET_SUBSYSTEM_INFO - * **MUST** be called from within retro_set_environment(). - */ -#define RETRO_ENVIRONMENT_SET_CONTROLLER_INFO 35 - /* const struct retro_controller_info * -- - * This environment call lets a libretro core tell the frontend - * which controller subclasses are recognized in calls to - * retro_set_controller_port_device(). - * - * Some emulators such as Super Nintendo support multiple lightgun - * types which must be specifically selected from. It is therefore - * sometimes necessary for a frontend to be able to tell the core - * about a special kind of input device which is not specifcally - * provided by the Libretro API. - * - * In order for a frontend to understand the workings of those devices, - * they must be defined as a specialized subclass of the generic device - * types already defined in the libretro API. - * - * The core must pass an array of const struct retro_controller_info which - * is terminated with a blanked out struct. Each element of the - * retro_controller_info struct corresponds to the ascending port index - * that is passed to retro_set_controller_port_device() when that function - * is called to indicate to the core that the frontend has changed the - * active device subclass. SEE ALSO: retro_set_controller_port_device() - * - * The ascending input port indexes provided by the core in the struct - * are generally presented by frontends as ascending User # or Player #, - * such as Player 1, Player 2, Player 3, etc. Which device subclasses are - * supported can vary per input port. - * - * The first inner element of each entry in the retro_controller_info array - * is a retro_controller_description struct that specifies the names and - * codes of all device subclasses that are available for the corresponding - * User or Player, beginning with the generic Libretro device that the - * subclasses are derived from. The second inner element of each entry is the - * total number of subclasses that are listed in the retro_controller_description. - * - * NOTE: Even if special device types are set in the libretro core, - * libretro should only poll input based on the base input device types. - */ -#define RETRO_ENVIRONMENT_SET_MEMORY_MAPS (36 | RETRO_ENVIRONMENT_EXPERIMENTAL) - /* const struct retro_memory_map * -- - * This environment call lets a libretro core tell the frontend - * about the memory maps this core emulates. - * This can be used to implement, for example, cheats in a core-agnostic way. - * - * Should only be used by emulators; it doesn't make much sense for - * anything else. - * It is recommended to expose all relevant pointers through - * retro_get_memory_* as well. - * - * Can be called from retro_init and retro_load_game. - */ -#define RETRO_ENVIRONMENT_SET_GEOMETRY 37 - /* const struct retro_game_geometry * -- - * This environment call is similar to SET_SYSTEM_AV_INFO for changing - * video parameters, but provides a guarantee that drivers will not be - * reinitialized. - * This can only be called from within retro_run(). - * - * The purpose of this call is to allow a core to alter nominal - * width/heights as well as aspect ratios on-the-fly, which can be - * useful for some emulators to change in run-time. - * - * max_width/max_height arguments are ignored and cannot be changed - * with this call as this could potentially require a reinitialization or a - * non-constant time operation. - * If max_width/max_height are to be changed, SET_SYSTEM_AV_INFO is required. - * - * A frontend must guarantee that this environment call completes in - * constant time. - */ -#define RETRO_ENVIRONMENT_GET_USERNAME 38 - /* const char ** - * Returns the specified username of the frontend, if specified by the user. - * This username can be used as a nickname for a core that has online facilities - * or any other mode where personalization of the user is desirable. - * The returned value can be NULL. - * If this environ callback is used by a core that requires a valid username, - * a default username should be specified by the core. - */ -#define RETRO_ENVIRONMENT_GET_LANGUAGE 39 - /* unsigned * -- - * Returns the specified language of the frontend, if specified by the user. - * It can be used by the core for localization purposes. - */ -#define RETRO_ENVIRONMENT_GET_CURRENT_SOFTWARE_FRAMEBUFFER (40 | RETRO_ENVIRONMENT_EXPERIMENTAL) - /* struct retro_framebuffer * -- - * Returns a preallocated framebuffer which the core can use for rendering - * the frame into when not using SET_HW_RENDER. - * The framebuffer returned from this call must not be used - * after the current call to retro_run() returns. - * - * The goal of this call is to allow zero-copy behavior where a core - * can render directly into video memory, avoiding extra bandwidth cost by copying - * memory from core to video memory. - * - * If this call succeeds and the core renders into it, - * the framebuffer pointer and pitch can be passed to retro_video_refresh_t. - * If the buffer from GET_CURRENT_SOFTWARE_FRAMEBUFFER is to be used, - * the core must pass the exact - * same pointer as returned by GET_CURRENT_SOFTWARE_FRAMEBUFFER; - * i.e. passing a pointer which is offset from the - * buffer is undefined. The width, height and pitch parameters - * must also match exactly to the values obtained from GET_CURRENT_SOFTWARE_FRAMEBUFFER. - * - * It is possible for a frontend to return a different pixel format - * than the one used in SET_PIXEL_FORMAT. This can happen if the frontend - * needs to perform conversion. - * - * It is still valid for a core to render to a different buffer - * even if GET_CURRENT_SOFTWARE_FRAMEBUFFER succeeds. - * - * A frontend must make sure that the pointer obtained from this function is - * writeable (and readable). - */ -#define RETRO_ENVIRONMENT_GET_HW_RENDER_INTERFACE (41 | RETRO_ENVIRONMENT_EXPERIMENTAL) - /* const struct retro_hw_render_interface ** -- - * Returns an API specific rendering interface for accessing API specific data. - * Not all HW rendering APIs support or need this. - * The contents of the returned pointer is specific to the rendering API - * being used. See the various headers like libretro_vulkan.h, etc. - * - * GET_HW_RENDER_INTERFACE cannot be called before context_reset has been called. - * Similarly, after context_destroyed callback returns, - * the contents of the HW_RENDER_INTERFACE are invalidated. - */ -#define RETRO_ENVIRONMENT_SET_SUPPORT_ACHIEVEMENTS (42 | RETRO_ENVIRONMENT_EXPERIMENTAL) - /* const bool * -- - * If true, the libretro implementation supports achievements - * either via memory descriptors set with RETRO_ENVIRONMENT_SET_MEMORY_MAPS - * or via retro_get_memory_data/retro_get_memory_size. - * - * This must be called before the first call to retro_run. - */ -#define RETRO_ENVIRONMENT_SET_HW_RENDER_CONTEXT_NEGOTIATION_INTERFACE (43 | RETRO_ENVIRONMENT_EXPERIMENTAL) - /* const struct retro_hw_render_context_negotiation_interface * -- - * Sets an interface which lets the libretro core negotiate with frontend how a context is created. - * The semantics of this interface depends on which API is used in SET_HW_RENDER earlier. - * This interface will be used when the frontend is trying to create a HW rendering context, - * so it will be used after SET_HW_RENDER, but before the context_reset callback. - */ -#define RETRO_ENVIRONMENT_SET_SERIALIZATION_QUIRKS 44 - /* uint64_t * -- - * Sets quirk flags associated with serialization. The frontend will zero any flags it doesn't - * recognize or support. Should be set in either retro_init or retro_load_game, but not both. - */ -#define RETRO_ENVIRONMENT_SET_HW_SHARED_CONTEXT (44 | RETRO_ENVIRONMENT_EXPERIMENTAL) - /* N/A (null) * -- - * The frontend will try to use a 'shared' hardware context (mostly applicable - * to OpenGL) when a hardware context is being set up. - * - * Returns true if the frontend supports shared hardware contexts and false - * if the frontend does not support shared hardware contexts. - * - * This will do nothing on its own until SET_HW_RENDER env callbacks are - * being used. - */ -#define RETRO_ENVIRONMENT_GET_VFS_INTERFACE (45 | RETRO_ENVIRONMENT_EXPERIMENTAL) - /* struct retro_vfs_interface_info * -- - * Gets access to the VFS interface. - * VFS presence needs to be queried prior to load_game or any - * get_system/save/other_directory being called to let front end know - * core supports VFS before it starts handing out paths. - * It is recomended to do so in retro_set_environment - */ -#define RETRO_ENVIRONMENT_GET_LED_INTERFACE (46 | RETRO_ENVIRONMENT_EXPERIMENTAL) - /* struct retro_led_interface * -- - * Gets an interface which is used by a libretro core to set - * state of LEDs. - */ -#define RETRO_ENVIRONMENT_GET_AUDIO_VIDEO_ENABLE (47 | RETRO_ENVIRONMENT_EXPERIMENTAL) - /* int * -- - * Tells the core if the frontend wants audio or video. - * If disabled, the frontend will discard the audio or video, - * so the core may decide to skip generating a frame or generating audio. - * This is mainly used for increasing performance. - * Bit 0 (value 1): Enable Video - * Bit 1 (value 2): Enable Audio - * Bit 2 (value 4): Use Fast Savestates. - * Bit 3 (value 8): Hard Disable Audio - * Other bits are reserved for future use and will default to zero. - * If video is disabled: - * * The frontend wants the core to not generate any video, - * including presenting frames via hardware acceleration. - * * The frontend's video frame callback will do nothing. - * * After running the frame, the video output of the next frame should be - * no different than if video was enabled, and saving and loading state - * should have no issues. - * If audio is disabled: - * * The frontend wants the core to not generate any audio. - * * The frontend's audio callbacks will do nothing. - * * After running the frame, the audio output of the next frame should be - * no different than if audio was enabled, and saving and loading state - * should have no issues. - * Fast Savestates: - * * Guaranteed to be created by the same binary that will load them. - * * Will not be written to or read from the disk. - * * Suggest that the core assumes loading state will succeed. - * * Suggest that the core updates its memory buffers in-place if possible. - * * Suggest that the core skips clearing memory. - * * Suggest that the core skips resetting the system. - * * Suggest that the core may skip validation steps. - * Hard Disable Audio: - * * Used for a secondary core when running ahead. - * * Indicates that the frontend will never need audio from the core. - * * Suggests that the core may stop synthesizing audio, but this should not - * compromise emulation accuracy. - * * Audio output for the next frame does not matter, and the frontend will - * never need an accurate audio state in the future. - * * State will never be saved when using Hard Disable Audio. - */ -#define RETRO_ENVIRONMENT_GET_MIDI_INTERFACE (48 | RETRO_ENVIRONMENT_EXPERIMENTAL) - /* struct retro_midi_interface ** -- - * Returns a MIDI interface that can be used for raw data I/O. - */ - -#define RETRO_ENVIRONMENT_GET_FASTFORWARDING (49 | RETRO_ENVIRONMENT_EXPERIMENTAL) - /* bool * -- - * Boolean value that indicates whether or not the frontend is in - * fastforwarding mode. - */ - -#define RETRO_ENVIRONMENT_GET_TARGET_REFRESH_RATE (50 | RETRO_ENVIRONMENT_EXPERIMENTAL) - /* float * -- - * Float value that lets us know what target refresh rate - * is curently in use by the frontend. - * - * The core can use the returned value to set an ideal - * refresh rate/framerate. - */ - -#define RETRO_ENVIRONMENT_GET_INPUT_BITMASKS (51 | RETRO_ENVIRONMENT_EXPERIMENTAL) - /* bool * -- - * Boolean value that indicates whether or not the frontend supports - * input bitmasks being returned by retro_input_state_t. The advantage - * of this is that retro_input_state_t has to be only called once to - * grab all button states instead of multiple times. - * - * If it returns true, you can pass RETRO_DEVICE_ID_JOYPAD_MASK as 'id' - * to retro_input_state_t (make sure 'device' is set to RETRO_DEVICE_JOYPAD). - * It will return a bitmask of all the digital buttons. - */ - -/* VFS functionality */ - -/* File paths: - * File paths passed as parameters when using this API shall be well formed UNIX-style, - * using "/" (unquoted forward slash) as directory separator regardless of the platform's native separator. - * Paths shall also include at least one forward slash ("game.bin" is an invalid path, use "./game.bin" instead). - * Other than the directory separator, cores shall not make assumptions about path format: - * "C:/path/game.bin", "http://example.com/game.bin", "#game/game.bin", "./game.bin" (without quotes) are all valid paths. - * Cores may replace the basename or remove path components from the end, and/or add new components; - * however, cores shall not append "./", "../" or multiple consecutive forward slashes ("//") to paths they request to front end. - * The frontend is encouraged to make such paths work as well as it can, but is allowed to give up if the core alters paths too much. - * Frontends are encouraged, but not required, to support native file system paths (modulo replacing the directory separator, if applicable). - * Cores are allowed to try using them, but must remain functional if the front rejects such requests. - * Cores are encouraged to use the libretro-common filestream functions for file I/O, - * as they seamlessly integrate with VFS, deal with directory separator replacement as appropriate - * and provide platform-specific fallbacks in cases where front ends do not support VFS. */ - -/* Opaque file handle - * Introduced in VFS API v1 */ -struct retro_vfs_file_handle; - -/* Opaque directory handle - * Introduced in VFS API v3 */ -struct retro_vfs_dir_handle; - -/* File open flags - * Introduced in VFS API v1 */ -#define RETRO_VFS_FILE_ACCESS_READ (1 << 0) /* Read only mode */ -#define RETRO_VFS_FILE_ACCESS_WRITE (1 << 1) /* Write only mode, discard contents and overwrites existing file unless RETRO_VFS_FILE_ACCESS_UPDATE is also specified */ -#define RETRO_VFS_FILE_ACCESS_READ_WRITE (RETRO_VFS_FILE_ACCESS_READ | RETRO_VFS_FILE_ACCESS_WRITE) /* Read-write mode, discard contents and overwrites existing file unless RETRO_VFS_FILE_ACCESS_UPDATE is also specified*/ -#define RETRO_VFS_FILE_ACCESS_UPDATE_EXISTING (1 << 2) /* Prevents discarding content of existing files opened for writing */ - -/* These are only hints. The frontend may choose to ignore them. Other than RAM/CPU/etc use, - and how they react to unlikely external interference (for example someone else writing to that file, - or the file's server going down), behavior will not change. */ -#define RETRO_VFS_FILE_ACCESS_HINT_NONE (0) -/* Indicate that the file will be accessed many times. The frontend should aggressively cache everything. */ -#define RETRO_VFS_FILE_ACCESS_HINT_FREQUENT_ACCESS (1 << 0) - -/* Seek positions */ -#define RETRO_VFS_SEEK_POSITION_START 0 -#define RETRO_VFS_SEEK_POSITION_CURRENT 1 -#define RETRO_VFS_SEEK_POSITION_END 2 - -/* stat() result flags - * Introduced in VFS API v3 */ -#define RETRO_VFS_STAT_IS_VALID (1 << 0) -#define RETRO_VFS_STAT_IS_DIRECTORY (1 << 1) -#define RETRO_VFS_STAT_IS_CHARACTER_SPECIAL (1 << 2) - -/* Get path from opaque handle. Returns the exact same path passed to file_open when getting the handle - * Introduced in VFS API v1 */ -typedef const char *(RETRO_CALLCONV *retro_vfs_get_path_t)(struct retro_vfs_file_handle *stream); - -/* Open a file for reading or writing. If path points to a directory, this will - * fail. Returns the opaque file handle, or NULL for error. - * Introduced in VFS API v1 */ -typedef struct retro_vfs_file_handle *(RETRO_CALLCONV *retro_vfs_open_t)(const char *path, unsigned mode, unsigned hints); - -/* Close the file and release its resources. Must be called if open_file returns non-NULL. Returns 0 on success, -1 on failure. - * Whether the call succeeds ot not, the handle passed as parameter becomes invalid and should no longer be used. - * Introduced in VFS API v1 */ -typedef int (RETRO_CALLCONV *retro_vfs_close_t)(struct retro_vfs_file_handle *stream); - -/* Return the size of the file in bytes, or -1 for error. - * Introduced in VFS API v1 */ -typedef int64_t (RETRO_CALLCONV *retro_vfs_size_t)(struct retro_vfs_file_handle *stream); - -/* Truncate file to specified size. Returns 0 on success or -1 on error - * Introduced in VFS API v2 */ -typedef int64_t (RETRO_CALLCONV *retro_vfs_truncate_t)(struct retro_vfs_file_handle *stream, int64_t length); - -/* Get the current read / write position for the file. Returns -1 for error. - * Introduced in VFS API v1 */ -typedef int64_t (RETRO_CALLCONV *retro_vfs_tell_t)(struct retro_vfs_file_handle *stream); - -/* Set the current read/write position for the file. Returns the new position, -1 for error. - * Introduced in VFS API v1 */ -typedef int64_t (RETRO_CALLCONV *retro_vfs_seek_t)(struct retro_vfs_file_handle *stream, int64_t offset, int seek_position); - -/* Read data from a file. Returns the number of bytes read, or -1 for error. - * Introduced in VFS API v1 */ -typedef int64_t (RETRO_CALLCONV *retro_vfs_read_t)(struct retro_vfs_file_handle *stream, void *s, uint64_t len); - -/* Write data to a file. Returns the number of bytes written, or -1 for error. - * Introduced in VFS API v1 */ -typedef int64_t (RETRO_CALLCONV *retro_vfs_write_t)(struct retro_vfs_file_handle *stream, const void *s, uint64_t len); - -/* Flush pending writes to file, if using buffered IO. Returns 0 on sucess, or -1 on failure. - * Introduced in VFS API v1 */ -typedef int (RETRO_CALLCONV *retro_vfs_flush_t)(struct retro_vfs_file_handle *stream); - -/* Delete the specified file. Returns 0 on success, -1 on failure - * Introduced in VFS API v1 */ -typedef int (RETRO_CALLCONV *retro_vfs_remove_t)(const char *path); - -/* Rename the specified file. Returns 0 on success, -1 on failure - * Introduced in VFS API v1 */ -typedef int (RETRO_CALLCONV *retro_vfs_rename_t)(const char *old_path, const char *new_path); - -/* Stat the specified file. Retruns a bitmask of RETRO_VFS_STAT_* flags, none are set if path was not valid. - * Additionally stores file size in given variable, unless NULL is given. - * Introduced in VFS API v3 */ -typedef int (RETRO_CALLCONV *retro_vfs_stat_t)(const char *path, int32_t *size); - -/* Create the specified directory. Returns 0 on success, -1 on unknown failure, -2 if already exists. - * Introduced in VFS API v3 */ -typedef int (RETRO_CALLCONV *retro_vfs_mkdir_t)(const char *dir); - -/* Open the specified directory for listing. Returns the opaque dir handle, or NULL for error. - * Support for the include_hidden argument may vary depending on the platform. - * Introduced in VFS API v3 */ -typedef struct retro_vfs_dir_handle *(RETRO_CALLCONV *retro_vfs_opendir_t)(const char *dir, bool include_hidden); - -/* Read the directory entry at the current position, and move the read pointer to the next position. - * Returns true on success, false if already on the last entry. - * Introduced in VFS API v3 */ -typedef bool (RETRO_CALLCONV *retro_vfs_readdir_t)(struct retro_vfs_dir_handle *dirstream); - -/* Get the name of the last entry read. Returns a string on success, or NULL for error. - * The returned string pointer is valid until the next call to readdir or closedir. - * Introduced in VFS API v3 */ -typedef const char *(RETRO_CALLCONV *retro_vfs_dirent_get_name_t)(struct retro_vfs_dir_handle *dirstream); - -/* Check if the last entry read was a directory. Returns true if it was, false otherwise (or on error). - * Introduced in VFS API v3 */ -typedef bool (RETRO_CALLCONV *retro_vfs_dirent_is_dir_t)(struct retro_vfs_dir_handle *dirstream); - -/* Close the directory and release its resources. Must be called if opendir returns non-NULL. Returns 0 on success, -1 on failure. - * Whether the call succeeds ot not, the handle passed as parameter becomes invalid and should no longer be used. - * Introduced in VFS API v3 */ -typedef int (RETRO_CALLCONV *retro_vfs_closedir_t)(struct retro_vfs_dir_handle *dirstream); - -struct retro_vfs_interface -{ - /* VFS API v1 */ - retro_vfs_get_path_t get_path; - retro_vfs_open_t open; - retro_vfs_close_t close; - retro_vfs_size_t size; - retro_vfs_tell_t tell; - retro_vfs_seek_t seek; - retro_vfs_read_t read; - retro_vfs_write_t write; - retro_vfs_flush_t flush; - retro_vfs_remove_t remove; - retro_vfs_rename_t rename; - /* VFS API v2 */ - retro_vfs_truncate_t truncate; - /* VFS API v3 */ - retro_vfs_stat_t stat; - retro_vfs_mkdir_t mkdir; - retro_vfs_opendir_t opendir; - retro_vfs_readdir_t readdir; - retro_vfs_dirent_get_name_t dirent_get_name; - retro_vfs_dirent_is_dir_t dirent_is_dir; - retro_vfs_closedir_t closedir; -}; - -struct retro_vfs_interface_info -{ - /* Set by core: should this be higher than the version the front end supports, - * front end will return false in the RETRO_ENVIRONMENT_GET_VFS_INTERFACE call - * Introduced in VFS API v1 */ - uint32_t required_interface_version; - - /* Frontend writes interface pointer here. The frontend also sets the actual - * version, must be at least required_interface_version. - * Introduced in VFS API v1 */ - struct retro_vfs_interface *iface; -}; - -enum retro_hw_render_interface_type -{ - RETRO_HW_RENDER_INTERFACE_VULKAN = 0, - RETRO_HW_RENDER_INTERFACE_D3D9 = 1, - RETRO_HW_RENDER_INTERFACE_D3D10 = 2, - RETRO_HW_RENDER_INTERFACE_D3D11 = 3, - RETRO_HW_RENDER_INTERFACE_D3D12 = 4, - RETRO_HW_RENDER_INTERFACE_GSKIT_PS2 = 5, - RETRO_HW_RENDER_INTERFACE_DUMMY = INT_MAX -}; - -/* Base struct. All retro_hw_render_interface_* types - * contain at least these fields. */ -struct retro_hw_render_interface -{ - enum retro_hw_render_interface_type interface_type; - unsigned interface_version; -}; - -typedef void (RETRO_CALLCONV *retro_set_led_state_t)(int led, int state); -struct retro_led_interface -{ - retro_set_led_state_t set_led_state; -}; - -/* Retrieves the current state of the MIDI input. - * Returns true if it's enabled, false otherwise. */ -typedef bool (RETRO_CALLCONV *retro_midi_input_enabled_t)(void); - -/* Retrieves the current state of the MIDI output. - * Returns true if it's enabled, false otherwise */ -typedef bool (RETRO_CALLCONV *retro_midi_output_enabled_t)(void); - -/* Reads next byte from the input stream. - * Returns true if byte is read, false otherwise. */ -typedef bool (RETRO_CALLCONV *retro_midi_read_t)(uint8_t *byte); - -/* Writes byte to the output stream. - * 'delta_time' is in microseconds and represent time elapsed since previous write. - * Returns true if byte is written, false otherwise. */ -typedef bool (RETRO_CALLCONV *retro_midi_write_t)(uint8_t byte, uint32_t delta_time); - -/* Flushes previously written data. - * Returns true if successful, false otherwise. */ -typedef bool (RETRO_CALLCONV *retro_midi_flush_t)(void); - -struct retro_midi_interface -{ - retro_midi_input_enabled_t input_enabled; - retro_midi_output_enabled_t output_enabled; - retro_midi_read_t read; - retro_midi_write_t write; - retro_midi_flush_t flush; -}; - -enum retro_hw_render_context_negotiation_interface_type -{ - RETRO_HW_RENDER_CONTEXT_NEGOTIATION_INTERFACE_VULKAN = 0, - RETRO_HW_RENDER_CONTEXT_NEGOTIATION_INTERFACE_DUMMY = INT_MAX -}; - -/* Base struct. All retro_hw_render_context_negotiation_interface_* types - * contain at least these fields. */ -struct retro_hw_render_context_negotiation_interface -{ - enum retro_hw_render_context_negotiation_interface_type interface_type; - unsigned interface_version; -}; - -/* Serialized state is incomplete in some way. Set if serialization is - * usable in typical end-user cases but should not be relied upon to - * implement frame-sensitive frontend features such as netplay or - * rerecording. */ -#define RETRO_SERIALIZATION_QUIRK_INCOMPLETE (1 << 0) -/* The core must spend some time initializing before serialization is - * supported. retro_serialize() will initially fail; retro_unserialize() - * and retro_serialize_size() may or may not work correctly either. */ -#define RETRO_SERIALIZATION_QUIRK_MUST_INITIALIZE (1 << 1) -/* Serialization size may change within a session. */ -#define RETRO_SERIALIZATION_QUIRK_CORE_VARIABLE_SIZE (1 << 2) -/* Set by the frontend to acknowledge that it supports variable-sized - * states. */ -#define RETRO_SERIALIZATION_QUIRK_FRONT_VARIABLE_SIZE (1 << 3) -/* Serialized state can only be loaded during the same session. */ -#define RETRO_SERIALIZATION_QUIRK_SINGLE_SESSION (1 << 4) -/* Serialized state cannot be loaded on an architecture with a different - * endianness from the one it was saved on. */ -#define RETRO_SERIALIZATION_QUIRK_ENDIAN_DEPENDENT (1 << 5) -/* Serialized state cannot be loaded on a different platform from the one it - * was saved on for reasons other than endianness, such as word size - * dependence */ -#define RETRO_SERIALIZATION_QUIRK_PLATFORM_DEPENDENT (1 << 6) - -#define RETRO_MEMDESC_CONST (1 << 0) /* The frontend will never change this memory area once retro_load_game has returned. */ -#define RETRO_MEMDESC_BIGENDIAN (1 << 1) /* The memory area contains big endian data. Default is little endian. */ -#define RETRO_MEMDESC_SYSTEM_RAM (1 << 2) /* The memory area is system RAM. This is main RAM of the gaming system. */ -#define RETRO_MEMDESC_SAVE_RAM (1 << 3) /* The memory area is save RAM. This RAM is usually found on a game cartridge, backed up by a battery. */ -#define RETRO_MEMDESC_VIDEO_RAM (1 << 4) /* The memory area is video RAM (VRAM) */ -#define RETRO_MEMDESC_ALIGN_2 (1 << 16) /* All memory access in this area is aligned to their own size, or 2, whichever is smaller. */ -#define RETRO_MEMDESC_ALIGN_4 (2 << 16) -#define RETRO_MEMDESC_ALIGN_8 (3 << 16) -#define RETRO_MEMDESC_MINSIZE_2 (1 << 24) /* All memory in this region is accessed at least 2 bytes at the time. */ -#define RETRO_MEMDESC_MINSIZE_4 (2 << 24) -#define RETRO_MEMDESC_MINSIZE_8 (3 << 24) -struct retro_memory_descriptor -{ - uint64_t flags; - - /* Pointer to the start of the relevant ROM or RAM chip. - * It's strongly recommended to use 'offset' if possible, rather than - * doing math on the pointer. - * - * If the same byte is mapped my multiple descriptors, their descriptors - * must have the same pointer. - * If 'start' does not point to the first byte in the pointer, put the - * difference in 'offset' instead. - * - * May be NULL if there's nothing usable here (e.g. hardware registers and - * open bus). No flags should be set if the pointer is NULL. - * It's recommended to minimize the number of descriptors if possible, - * but not mandatory. */ - void *ptr; - size_t offset; - - /* This is the location in the emulated address space - * where the mapping starts. */ - size_t start; - - /* Which bits must be same as in 'start' for this mapping to apply. - * The first memory descriptor to claim a certain byte is the one - * that applies. - * A bit which is set in 'start' must also be set in this. - * Can be zero, in which case each byte is assumed mapped exactly once. - * In this case, 'len' must be a power of two. */ - size_t select; - - /* If this is nonzero, the set bits are assumed not connected to the - * memory chip's address pins. */ - size_t disconnect; - - /* This one tells the size of the current memory area. - * If, after start+disconnect are applied, the address is higher than - * this, the highest bit of the address is cleared. - * - * If the address is still too high, the next highest bit is cleared. - * Can be zero, in which case it's assumed to be infinite (as limited - * by 'select' and 'disconnect'). */ - size_t len; - - /* To go from emulated address to physical address, the following - * order applies: - * Subtract 'start', pick off 'disconnect', apply 'len', add 'offset'. */ - - /* The address space name must consist of only a-zA-Z0-9_-, - * should be as short as feasible (maximum length is 8 plus the NUL), - * and may not be any other address space plus one or more 0-9A-F - * at the end. - * However, multiple memory descriptors for the same address space is - * allowed, and the address space name can be empty. NULL is treated - * as empty. - * - * Address space names are case sensitive, but avoid lowercase if possible. - * The same pointer may exist in multiple address spaces. - * - * Examples: - * blank+blank - valid (multiple things may be mapped in the same namespace) - * 'Sp'+'Sp' - valid (multiple things may be mapped in the same namespace) - * 'A'+'B' - valid (neither is a prefix of each other) - * 'S'+blank - valid ('S' is not in 0-9A-F) - * 'a'+blank - valid ('a' is not in 0-9A-F) - * 'a'+'A' - valid (neither is a prefix of each other) - * 'AR'+blank - valid ('R' is not in 0-9A-F) - * 'ARB'+blank - valid (the B can't be part of the address either, because - * there is no namespace 'AR') - * blank+'B' - not valid, because it's ambigous which address space B1234 - * would refer to. - * The length can't be used for that purpose; the frontend may want - * to append arbitrary data to an address, without a separator. */ - const char *addrspace; - - /* TODO: When finalizing this one, add a description field, which should be - * "WRAM" or something roughly equally long. */ - - /* TODO: When finalizing this one, replace 'select' with 'limit', which tells - * which bits can vary and still refer to the same address (limit = ~select). - * TODO: limit? range? vary? something else? */ - - /* TODO: When finalizing this one, if 'len' is above what 'select' (or - * 'limit') allows, it's bankswitched. Bankswitched data must have both 'len' - * and 'select' != 0, and the mappings don't tell how the system switches the - * banks. */ - - /* TODO: When finalizing this one, fix the 'len' bit removal order. - * For len=0x1800, pointer 0x1C00 should go to 0x1400, not 0x0C00. - * Algorithm: Take bits highest to lowest, but if it goes above len, clear - * the most recent addition and continue on the next bit. - * TODO: Can the above be optimized? Is "remove the lowest bit set in both - * pointer and 'len'" equivalent? */ - - /* TODO: Some emulators (MAME?) emulate big endian systems by only accessing - * the emulated memory in 32-bit chunks, native endian. But that's nothing - * compared to Darek Mihocka <http://www.emulators.com/docs/nx07_vm101.htm> - * (section Emulation 103 - Nearly Free Byte Reversal) - he flips the ENTIRE - * RAM backwards! I'll want to represent both of those, via some flags. - * - * I suspect MAME either didn't think of that idea, or don't want the #ifdef. - * Not sure which, nor do I really care. */ - - /* TODO: Some of those flags are unused and/or don't really make sense. Clean - * them up. */ -}; - -/* The frontend may use the largest value of 'start'+'select' in a - * certain namespace to infer the size of the address space. - * - * If the address space is larger than that, a mapping with .ptr=NULL - * should be at the end of the array, with .select set to all ones for - * as long as the address space is big. - * - * Sample descriptors (minus .ptr, and RETRO_MEMFLAG_ on the flags): - * SNES WRAM: - * .start=0x7E0000, .len=0x20000 - * (Note that this must be mapped before the ROM in most cases; some of the - * ROM mappers - * try to claim $7E0000, or at least $7E8000.) - * SNES SPC700 RAM: - * .addrspace="S", .len=0x10000 - * SNES WRAM mirrors: - * .flags=MIRROR, .start=0x000000, .select=0xC0E000, .len=0x2000 - * .flags=MIRROR, .start=0x800000, .select=0xC0E000, .len=0x2000 - * SNES WRAM mirrors, alternate equivalent descriptor: - * .flags=MIRROR, .select=0x40E000, .disconnect=~0x1FFF - * (Various similar constructions can be created by combining parts of - * the above two.) - * SNES LoROM (512KB, mirrored a couple of times): - * .flags=CONST, .start=0x008000, .select=0x408000, .disconnect=0x8000, .len=512*1024 - * .flags=CONST, .start=0x400000, .select=0x400000, .disconnect=0x8000, .len=512*1024 - * SNES HiROM (4MB): - * .flags=CONST, .start=0x400000, .select=0x400000, .len=4*1024*1024 - * .flags=CONST, .offset=0x8000, .start=0x008000, .select=0x408000, .len=4*1024*1024 - * SNES ExHiROM (8MB): - * .flags=CONST, .offset=0, .start=0xC00000, .select=0xC00000, .len=4*1024*1024 - * .flags=CONST, .offset=4*1024*1024, .start=0x400000, .select=0xC00000, .len=4*1024*1024 - * .flags=CONST, .offset=0x8000, .start=0x808000, .select=0xC08000, .len=4*1024*1024 - * .flags=CONST, .offset=4*1024*1024+0x8000, .start=0x008000, .select=0xC08000, .len=4*1024*1024 - * Clarify the size of the address space: - * .ptr=NULL, .select=0xFFFFFF - * .len can be implied by .select in many of them, but was included for clarity. - */ - -struct retro_memory_map -{ - const struct retro_memory_descriptor *descriptors; - unsigned num_descriptors; -}; - -struct retro_controller_description -{ - /* Human-readable description of the controller. Even if using a generic - * input device type, this can be set to the particular device type the - * core uses. */ - const char *desc; - - /* Device type passed to retro_set_controller_port_device(). If the device - * type is a sub-class of a generic input device type, use the - * RETRO_DEVICE_SUBCLASS macro to create an ID. - * - * E.g. RETRO_DEVICE_SUBCLASS(RETRO_DEVICE_JOYPAD, 1). */ - unsigned id; -}; - -struct retro_controller_info -{ - const struct retro_controller_description *types; - unsigned num_types; -}; - -struct retro_subsystem_memory_info -{ - /* The extension associated with a memory type, e.g. "psram". */ - const char *extension; - - /* The memory type for retro_get_memory(). This should be at - * least 0x100 to avoid conflict with standardized - * libretro memory types. */ - unsigned type; -}; - -struct retro_subsystem_rom_info -{ - /* Describes what the content is (SGB BIOS, GB ROM, etc). */ - const char *desc; - - /* Same definition as retro_get_system_info(). */ - const char *valid_extensions; - - /* Same definition as retro_get_system_info(). */ - bool need_fullpath; - - /* Same definition as retro_get_system_info(). */ - bool block_extract; - - /* This is set if the content is required to load a game. - * If this is set to false, a zeroed-out retro_game_info can be passed. */ - bool required; - - /* Content can have multiple associated persistent - * memory types (retro_get_memory()). */ - const struct retro_subsystem_memory_info *memory; - unsigned num_memory; -}; - -struct retro_subsystem_info -{ - /* Human-readable string of the subsystem type, e.g. "Super GameBoy" */ - const char *desc; - - /* A computer friendly short string identifier for the subsystem type. - * This name must be [a-z]. - * E.g. if desc is "Super GameBoy", this can be "sgb". - * This identifier can be used for command-line interfaces, etc. - */ - const char *ident; - - /* Infos for each content file. The first entry is assumed to be the - * "most significant" content for frontend purposes. - * E.g. with Super GameBoy, the first content should be the GameBoy ROM, - * as it is the most "significant" content to a user. - * If a frontend creates new file paths based on the content used - * (e.g. savestates), it should use the path for the first ROM to do so. */ - const struct retro_subsystem_rom_info *roms; - - /* Number of content files associated with a subsystem. */ - unsigned num_roms; - - /* The type passed to retro_load_game_special(). */ - unsigned id; -}; - -typedef void (RETRO_CALLCONV *retro_proc_address_t)(void); - -/* libretro API extension functions: - * (None here so far). - * - * Get a symbol from a libretro core. - * Cores should only return symbols which are actual - * extensions to the libretro API. - * - * Frontends should not use this to obtain symbols to standard - * libretro entry points (static linking or dlsym). - * - * The symbol name must be equal to the function name, - * e.g. if void retro_foo(void); exists, the symbol must be called "retro_foo". - * The returned function pointer must be cast to the corresponding type. - */ -typedef retro_proc_address_t (RETRO_CALLCONV *retro_get_proc_address_t)(const char *sym); - -struct retro_get_proc_address_interface -{ - retro_get_proc_address_t get_proc_address; -}; - -enum retro_log_level -{ - RETRO_LOG_DEBUG = 0, - RETRO_LOG_INFO, - RETRO_LOG_WARN, - RETRO_LOG_ERROR, - - RETRO_LOG_DUMMY = INT_MAX -}; - -/* Logging function. Takes log level argument as well. */ -typedef void (RETRO_CALLCONV *retro_log_printf_t)(enum retro_log_level level, - const char *fmt, ...); - -struct retro_log_callback -{ - retro_log_printf_t log; -}; - -/* Performance related functions */ - -/* ID values for SIMD CPU features */ -#define RETRO_SIMD_SSE (1 << 0) -#define RETRO_SIMD_SSE2 (1 << 1) -#define RETRO_SIMD_VMX (1 << 2) -#define RETRO_SIMD_VMX128 (1 << 3) -#define RETRO_SIMD_AVX (1 << 4) -#define RETRO_SIMD_NEON (1 << 5) -#define RETRO_SIMD_SSE3 (1 << 6) -#define RETRO_SIMD_SSSE3 (1 << 7) -#define RETRO_SIMD_MMX (1 << 8) -#define RETRO_SIMD_MMXEXT (1 << 9) -#define RETRO_SIMD_SSE4 (1 << 10) -#define RETRO_SIMD_SSE42 (1 << 11) -#define RETRO_SIMD_AVX2 (1 << 12) -#define RETRO_SIMD_VFPU (1 << 13) -#define RETRO_SIMD_PS (1 << 14) -#define RETRO_SIMD_AES (1 << 15) -#define RETRO_SIMD_VFPV3 (1 << 16) -#define RETRO_SIMD_VFPV4 (1 << 17) -#define RETRO_SIMD_POPCNT (1 << 18) -#define RETRO_SIMD_MOVBE (1 << 19) -#define RETRO_SIMD_CMOV (1 << 20) -#define RETRO_SIMD_ASIMD (1 << 21) - -typedef uint64_t retro_perf_tick_t; -typedef int64_t retro_time_t; - -struct retro_perf_counter -{ - const char *ident; - retro_perf_tick_t start; - retro_perf_tick_t total; - retro_perf_tick_t call_cnt; - - bool registered; -}; - -/* Returns current time in microseconds. - * Tries to use the most accurate timer available. - */ -typedef retro_time_t (RETRO_CALLCONV *retro_perf_get_time_usec_t)(void); - -/* A simple counter. Usually nanoseconds, but can also be CPU cycles. - * Can be used directly if desired (when creating a more sophisticated - * performance counter system). - * */ -typedef retro_perf_tick_t (RETRO_CALLCONV *retro_perf_get_counter_t)(void); - -/* Returns a bit-mask of detected CPU features (RETRO_SIMD_*). */ -typedef uint64_t (RETRO_CALLCONV *retro_get_cpu_features_t)(void); - -/* Asks frontend to log and/or display the state of performance counters. - * Performance counters can always be poked into manually as well. - */ -typedef void (RETRO_CALLCONV *retro_perf_log_t)(void); - -/* Register a performance counter. - * ident field must be set with a discrete value and other values in - * retro_perf_counter must be 0. - * Registering can be called multiple times. To avoid calling to - * frontend redundantly, you can check registered field first. */ -typedef void (RETRO_CALLCONV *retro_perf_register_t)(struct retro_perf_counter *counter); - -/* Starts a registered counter. */ -typedef void (RETRO_CALLCONV *retro_perf_start_t)(struct retro_perf_counter *counter); - -/* Stops a registered counter. */ -typedef void (RETRO_CALLCONV *retro_perf_stop_t)(struct retro_perf_counter *counter); - -/* For convenience it can be useful to wrap register, start and stop in macros. - * E.g.: - * #ifdef LOG_PERFORMANCE - * #define RETRO_PERFORMANCE_INIT(perf_cb, name) static struct retro_perf_counter name = {#name}; if (!name.registered) perf_cb.perf_register(&(name)) - * #define RETRO_PERFORMANCE_START(perf_cb, name) perf_cb.perf_start(&(name)) - * #define RETRO_PERFORMANCE_STOP(perf_cb, name) perf_cb.perf_stop(&(name)) - * #else - * ... Blank macros ... - * #endif - * - * These can then be used mid-functions around code snippets. - * - * extern struct retro_perf_callback perf_cb; * Somewhere in the core. - * - * void do_some_heavy_work(void) - * { - * RETRO_PERFORMANCE_INIT(cb, work_1; - * RETRO_PERFORMANCE_START(cb, work_1); - * heavy_work_1(); - * RETRO_PERFORMANCE_STOP(cb, work_1); - * - * RETRO_PERFORMANCE_INIT(cb, work_2); - * RETRO_PERFORMANCE_START(cb, work_2); - * heavy_work_2(); - * RETRO_PERFORMANCE_STOP(cb, work_2); - * } - * - * void retro_deinit(void) - * { - * perf_cb.perf_log(); * Log all perf counters here for example. - * } - */ - -struct retro_perf_callback -{ - retro_perf_get_time_usec_t get_time_usec; - retro_get_cpu_features_t get_cpu_features; - - retro_perf_get_counter_t get_perf_counter; - retro_perf_register_t perf_register; - retro_perf_start_t perf_start; - retro_perf_stop_t perf_stop; - retro_perf_log_t perf_log; -}; - -/* FIXME: Document the sensor API and work out behavior. - * It will be marked as experimental until then. - */ -enum retro_sensor_action -{ - RETRO_SENSOR_ACCELEROMETER_ENABLE = 0, - RETRO_SENSOR_ACCELEROMETER_DISABLE, - - RETRO_SENSOR_DUMMY = INT_MAX -}; - -/* Id values for SENSOR types. */ -#define RETRO_SENSOR_ACCELEROMETER_X 0 -#define RETRO_SENSOR_ACCELEROMETER_Y 1 -#define RETRO_SENSOR_ACCELEROMETER_Z 2 - -typedef bool (RETRO_CALLCONV *retro_set_sensor_state_t)(unsigned port, - enum retro_sensor_action action, unsigned rate); - -typedef float (RETRO_CALLCONV *retro_sensor_get_input_t)(unsigned port, unsigned id); - -struct retro_sensor_interface -{ - retro_set_sensor_state_t set_sensor_state; - retro_sensor_get_input_t get_sensor_input; -}; - -enum retro_camera_buffer -{ - RETRO_CAMERA_BUFFER_OPENGL_TEXTURE = 0, - RETRO_CAMERA_BUFFER_RAW_FRAMEBUFFER, - - RETRO_CAMERA_BUFFER_DUMMY = INT_MAX -}; - -/* Starts the camera driver. Can only be called in retro_run(). */ -typedef bool (RETRO_CALLCONV *retro_camera_start_t)(void); - -/* Stops the camera driver. Can only be called in retro_run(). */ -typedef void (RETRO_CALLCONV *retro_camera_stop_t)(void); - -/* Callback which signals when the camera driver is initialized - * and/or deinitialized. - * retro_camera_start_t can be called in initialized callback. - */ -typedef void (RETRO_CALLCONV *retro_camera_lifetime_status_t)(void); - -/* A callback for raw framebuffer data. buffer points to an XRGB8888 buffer. - * Width, height and pitch are similar to retro_video_refresh_t. - * First pixel is top-left origin. - */ -typedef void (RETRO_CALLCONV *retro_camera_frame_raw_framebuffer_t)(const uint32_t *buffer, - unsigned width, unsigned height, size_t pitch); - -/* A callback for when OpenGL textures are used. - * - * texture_id is a texture owned by camera driver. - * Its state or content should be considered immutable, except for things like - * texture filtering and clamping. - * - * texture_target is the texture target for the GL texture. - * These can include e.g. GL_TEXTURE_2D, GL_TEXTURE_RECTANGLE, and possibly - * more depending on extensions. - * - * affine points to a packed 3x3 column-major matrix used to apply an affine - * transform to texture coordinates. (affine_matrix * vec3(coord_x, coord_y, 1.0)) - * After transform, normalized texture coord (0, 0) should be bottom-left - * and (1, 1) should be top-right (or (width, height) for RECTANGLE). - * - * GL-specific typedefs are avoided here to avoid relying on gl.h in - * the API definition. - */ -typedef void (RETRO_CALLCONV *retro_camera_frame_opengl_texture_t)(unsigned texture_id, - unsigned texture_target, const float *affine); - -struct retro_camera_callback -{ - /* Set by libretro core. - * Example bitmask: caps = (1 << RETRO_CAMERA_BUFFER_OPENGL_TEXTURE) | (1 << RETRO_CAMERA_BUFFER_RAW_FRAMEBUFFER). - */ - uint64_t caps; - - /* Desired resolution for camera. Is only used as a hint. */ - unsigned width; - unsigned height; - - /* Set by frontend. */ - retro_camera_start_t start; - retro_camera_stop_t stop; - - /* Set by libretro core if raw framebuffer callbacks will be used. */ - retro_camera_frame_raw_framebuffer_t frame_raw_framebuffer; - - /* Set by libretro core if OpenGL texture callbacks will be used. */ - retro_camera_frame_opengl_texture_t frame_opengl_texture; - - /* Set by libretro core. Called after camera driver is initialized and - * ready to be started. - * Can be NULL, in which this callback is not called. - */ - retro_camera_lifetime_status_t initialized; - - /* Set by libretro core. Called right before camera driver is - * deinitialized. - * Can be NULL, in which this callback is not called. - */ - retro_camera_lifetime_status_t deinitialized; -}; - -/* Sets the interval of time and/or distance at which to update/poll - * location-based data. - * - * To ensure compatibility with all location-based implementations, - * values for both interval_ms and interval_distance should be provided. - * - * interval_ms is the interval expressed in milliseconds. - * interval_distance is the distance interval expressed in meters. - */ -typedef void (RETRO_CALLCONV *retro_location_set_interval_t)(unsigned interval_ms, - unsigned interval_distance); - -/* Start location services. The device will start listening for changes to the - * current location at regular intervals (which are defined with - * retro_location_set_interval_t). */ -typedef bool (RETRO_CALLCONV *retro_location_start_t)(void); - -/* Stop location services. The device will stop listening for changes - * to the current location. */ -typedef void (RETRO_CALLCONV *retro_location_stop_t)(void); - -/* Get the position of the current location. Will set parameters to - * 0 if no new location update has happened since the last time. */ -typedef bool (RETRO_CALLCONV *retro_location_get_position_t)(double *lat, double *lon, - double *horiz_accuracy, double *vert_accuracy); - -/* Callback which signals when the location driver is initialized - * and/or deinitialized. - * retro_location_start_t can be called in initialized callback. - */ -typedef void (RETRO_CALLCONV *retro_location_lifetime_status_t)(void); - -struct retro_location_callback -{ - retro_location_start_t start; - retro_location_stop_t stop; - retro_location_get_position_t get_position; - retro_location_set_interval_t set_interval; - - retro_location_lifetime_status_t initialized; - retro_location_lifetime_status_t deinitialized; -}; - -enum retro_rumble_effect -{ - RETRO_RUMBLE_STRONG = 0, - RETRO_RUMBLE_WEAK = 1, - - RETRO_RUMBLE_DUMMY = INT_MAX -}; - -/* Sets rumble state for joypad plugged in port 'port'. - * Rumble effects are controlled independently, - * and setting e.g. strong rumble does not override weak rumble. - * Strength has a range of [0, 0xffff]. - * - * Returns true if rumble state request was honored. - * Calling this before first retro_run() is likely to return false. */ -typedef bool (RETRO_CALLCONV *retro_set_rumble_state_t)(unsigned port, - enum retro_rumble_effect effect, uint16_t strength); - -struct retro_rumble_interface -{ - retro_set_rumble_state_t set_rumble_state; -}; - -/* Notifies libretro that audio data should be written. */ -typedef void (RETRO_CALLCONV *retro_audio_callback_t)(void); - -/* True: Audio driver in frontend is active, and callback is - * expected to be called regularily. - * False: Audio driver in frontend is paused or inactive. - * Audio callback will not be called until set_state has been - * called with true. - * Initial state is false (inactive). - */ -typedef void (RETRO_CALLCONV *retro_audio_set_state_callback_t)(bool enabled); - -struct retro_audio_callback -{ - retro_audio_callback_t callback; - retro_audio_set_state_callback_t set_state; -}; - -/* Notifies a libretro core of time spent since last invocation - * of retro_run() in microseconds. - * - * It will be called right before retro_run() every frame. - * The frontend can tamper with timing to support cases like - * fast-forward, slow-motion and framestepping. - * - * In those scenarios the reference frame time value will be used. */ -typedef int64_t retro_usec_t; -typedef void (RETRO_CALLCONV *retro_frame_time_callback_t)(retro_usec_t usec); -struct retro_frame_time_callback -{ - retro_frame_time_callback_t callback; - /* Represents the time of one frame. It is computed as - * 1000000 / fps, but the implementation will resolve the - * rounding to ensure that framestepping, etc is exact. */ - retro_usec_t reference; -}; - -/* Pass this to retro_video_refresh_t if rendering to hardware. - * Passing NULL to retro_video_refresh_t is still a frame dupe as normal. - * */ -#define RETRO_HW_FRAME_BUFFER_VALID ((void*)-1) - -/* Invalidates the current HW context. - * Any GL state is lost, and must not be deinitialized explicitly. - * If explicit deinitialization is desired by the libretro core, - * it should implement context_destroy callback. - * If called, all GPU resources must be reinitialized. - * Usually called when frontend reinits video driver. - * Also called first time video driver is initialized, - * allowing libretro core to initialize resources. - */ -typedef void (RETRO_CALLCONV *retro_hw_context_reset_t)(void); - -/* Gets current framebuffer which is to be rendered to. - * Could change every frame potentially. - */ -typedef uintptr_t (RETRO_CALLCONV *retro_hw_get_current_framebuffer_t)(void); - -/* Get a symbol from HW context. */ -typedef retro_proc_address_t (RETRO_CALLCONV *retro_hw_get_proc_address_t)(const char *sym); - -enum retro_hw_context_type -{ - RETRO_HW_CONTEXT_NONE = 0, - /* OpenGL 2.x. Driver can choose to use latest compatibility context. */ - RETRO_HW_CONTEXT_OPENGL = 1, - /* OpenGL ES 2.0. */ - RETRO_HW_CONTEXT_OPENGLES2 = 2, - /* Modern desktop core GL context. Use version_major/ - * version_minor fields to set GL version. */ - RETRO_HW_CONTEXT_OPENGL_CORE = 3, - /* OpenGL ES 3.0 */ - RETRO_HW_CONTEXT_OPENGLES3 = 4, - /* OpenGL ES 3.1+. Set version_major/version_minor. For GLES2 and GLES3, - * use the corresponding enums directly. */ - RETRO_HW_CONTEXT_OPENGLES_VERSION = 5, - - /* Vulkan, see RETRO_ENVIRONMENT_GET_HW_RENDER_INTERFACE. */ - RETRO_HW_CONTEXT_VULKAN = 6, - - /* Direct3D, set version_major to select the type of interface - * returned by RETRO_ENVIRONMENT_GET_HW_RENDER_INTERFACE */ - RETRO_HW_CONTEXT_DIRECT3D = 7, - - RETRO_HW_CONTEXT_DUMMY = INT_MAX -}; - -struct retro_hw_render_callback -{ - /* Which API to use. Set by libretro core. */ - enum retro_hw_context_type context_type; - - /* Called when a context has been created or when it has been reset. - * An OpenGL context is only valid after context_reset() has been called. - * - * When context_reset is called, OpenGL resources in the libretro - * implementation are guaranteed to be invalid. - * - * It is possible that context_reset is called multiple times during an - * application lifecycle. - * If context_reset is called without any notification (context_destroy), - * the OpenGL context was lost and resources should just be recreated - * without any attempt to "free" old resources. - */ - retro_hw_context_reset_t context_reset; - - /* Set by frontend. - * TODO: This is rather obsolete. The frontend should not - * be providing preallocated framebuffers. */ - retro_hw_get_current_framebuffer_t get_current_framebuffer; - - /* Set by frontend. - * Can return all relevant functions, including glClear on Windows. */ - retro_hw_get_proc_address_t get_proc_address; - - /* Set if render buffers should have depth component attached. - * TODO: Obsolete. */ - bool depth; - - /* Set if stencil buffers should be attached. - * TODO: Obsolete. */ - bool stencil; - - /* If depth and stencil are true, a packed 24/8 buffer will be added. - * Only attaching stencil is invalid and will be ignored. */ - - /* Use conventional bottom-left origin convention. If false, - * standard libretro top-left origin semantics are used. - * TODO: Move to GL specific interface. */ - bool bottom_left_origin; - - /* Major version number for core GL context or GLES 3.1+. */ - unsigned version_major; - - /* Minor version number for core GL context or GLES 3.1+. */ - unsigned version_minor; - - /* If this is true, the frontend will go very far to avoid - * resetting context in scenarios like toggling fullscreen, etc. - * TODO: Obsolete? Maybe frontend should just always assume this ... - */ - bool cache_context; - - /* The reset callback might still be called in extreme situations - * such as if the context is lost beyond recovery. - * - * For optimal stability, set this to false, and allow context to be - * reset at any time. - */ - - /* A callback to be called before the context is destroyed in a - * controlled way by the frontend. */ - retro_hw_context_reset_t context_destroy; - - /* OpenGL resources can be deinitialized cleanly at this step. - * context_destroy can be set to NULL, in which resources will - * just be destroyed without any notification. - * - * Even when context_destroy is non-NULL, it is possible that - * context_reset is called without any destroy notification. - * This happens if context is lost by external factors (such as - * notified by GL_ARB_robustness). - * - * In this case, the context is assumed to be already dead, - * and the libretro implementation must not try to free any OpenGL - * resources in the subsequent context_reset. - */ - - /* Creates a debug context. */ - bool debug_context; -}; - -/* Callback type passed in RETRO_ENVIRONMENT_SET_KEYBOARD_CALLBACK. - * Called by the frontend in response to keyboard events. - * down is set if the key is being pressed, or false if it is being released. - * keycode is the RETROK value of the char. - * character is the text character of the pressed key. (UTF-32). - * key_modifiers is a set of RETROKMOD values or'ed together. - * - * The pressed/keycode state can be indepedent of the character. - * It is also possible that multiple characters are generated from a - * single keypress. - * Keycode events should be treated separately from character events. - * However, when possible, the frontend should try to synchronize these. - * If only a character is posted, keycode should be RETROK_UNKNOWN. - * - * Similarily if only a keycode event is generated with no corresponding - * character, character should be 0. - */ -typedef void (RETRO_CALLCONV *retro_keyboard_event_t)(bool down, unsigned keycode, - uint32_t character, uint16_t key_modifiers); - -struct retro_keyboard_callback -{ - retro_keyboard_event_t callback; -}; - -/* Callbacks for RETRO_ENVIRONMENT_SET_DISK_CONTROL_INTERFACE. - * Should be set for implementations which can swap out multiple disk - * images in runtime. - * - * If the implementation can do this automatically, it should strive to do so. - * However, there are cases where the user must manually do so. - * - * Overview: To swap a disk image, eject the disk image with - * set_eject_state(true). - * Set the disk index with set_image_index(index). Insert the disk again - * with set_eject_state(false). - */ - -/* If ejected is true, "ejects" the virtual disk tray. - * When ejected, the disk image index can be set. - */ -typedef bool (RETRO_CALLCONV *retro_set_eject_state_t)(bool ejected); - -/* Gets current eject state. The initial state is 'not ejected'. */ -typedef bool (RETRO_CALLCONV *retro_get_eject_state_t)(void); - -/* Gets current disk index. First disk is index 0. - * If return value is >= get_num_images(), no disk is currently inserted. - */ -typedef unsigned (RETRO_CALLCONV *retro_get_image_index_t)(void); - -/* Sets image index. Can only be called when disk is ejected. - * The implementation supports setting "no disk" by using an - * index >= get_num_images(). - */ -typedef bool (RETRO_CALLCONV *retro_set_image_index_t)(unsigned index); - -/* Gets total number of images which are available to use. */ -typedef unsigned (RETRO_CALLCONV *retro_get_num_images_t)(void); - -struct retro_game_info; - -/* Replaces the disk image associated with index. - * Arguments to pass in info have same requirements as retro_load_game(). - * Virtual disk tray must be ejected when calling this. - * - * Replacing a disk image with info = NULL will remove the disk image - * from the internal list. - * As a result, calls to get_image_index() can change. - * - * E.g. replace_image_index(1, NULL), and previous get_image_index() - * returned 4 before. - * Index 1 will be removed, and the new index is 3. - */ -typedef bool (RETRO_CALLCONV *retro_replace_image_index_t)(unsigned index, - const struct retro_game_info *info); - -/* Adds a new valid index (get_num_images()) to the internal disk list. - * This will increment subsequent return values from get_num_images() by 1. - * This image index cannot be used until a disk image has been set - * with replace_image_index. */ -typedef bool (RETRO_CALLCONV *retro_add_image_index_t)(void); - -struct retro_disk_control_callback -{ - retro_set_eject_state_t set_eject_state; - retro_get_eject_state_t get_eject_state; - - retro_get_image_index_t get_image_index; - retro_set_image_index_t set_image_index; - retro_get_num_images_t get_num_images; - - retro_replace_image_index_t replace_image_index; - retro_add_image_index_t add_image_index; -}; - -enum retro_pixel_format -{ - /* 0RGB1555, native endian. - * 0 bit must be set to 0. - * This pixel format is default for compatibility concerns only. - * If a 15/16-bit pixel format is desired, consider using RGB565. */ - RETRO_PIXEL_FORMAT_0RGB1555 = 0, - - /* XRGB8888, native endian. - * X bits are ignored. */ - RETRO_PIXEL_FORMAT_XRGB8888 = 1, - - /* RGB565, native endian. - * This pixel format is the recommended format to use if a 15/16-bit - * format is desired as it is the pixel format that is typically - * available on a wide range of low-power devices. - * - * It is also natively supported in APIs like OpenGL ES. */ - RETRO_PIXEL_FORMAT_RGB565 = 2, - - /* Ensure sizeof() == sizeof(int). */ - RETRO_PIXEL_FORMAT_UNKNOWN = INT_MAX -}; - -struct retro_message -{ - const char *msg; /* Message to be displayed. */ - unsigned frames; /* Duration in frames of message. */ -}; - -/* Describes how the libretro implementation maps a libretro input bind - * to its internal input system through a human readable string. - * This string can be used to better let a user configure input. */ -struct retro_input_descriptor -{ - /* Associates given parameters with a description. */ - unsigned port; - unsigned device; - unsigned index; - unsigned id; - - /* Human readable description for parameters. - * The pointer must remain valid until - * retro_unload_game() is called. */ - const char *description; -}; - -struct retro_system_info -{ - /* All pointers are owned by libretro implementation, and pointers must - * remain valid until retro_deinit() is called. */ - - const char *library_name; /* Descriptive name of library. Should not - * contain any version numbers, etc. */ - const char *library_version; /* Descriptive version of core. */ - - const char *valid_extensions; /* A string listing probably content - * extensions the core will be able to - * load, separated with pipe. - * I.e. "bin|rom|iso". - * Typically used for a GUI to filter - * out extensions. */ - - /* Libretro cores that need to have direct access to their content - * files, including cores which use the path of the content files to - * determine the paths of other files, should set need_fullpath to true. - * - * Cores should strive for setting need_fullpath to false, - * as it allows the frontend to perform patching, etc. - * - * If need_fullpath is true and retro_load_game() is called: - * - retro_game_info::path is guaranteed to have a valid path - * - retro_game_info::data and retro_game_info::size are invalid - * - * If need_fullpath is false and retro_load_game() is called: - * - retro_game_info::path may be NULL - * - retro_game_info::data and retro_game_info::size are guaranteed - * to be valid - * - * See also: - * - RETRO_ENVIRONMENT_GET_SYSTEM_DIRECTORY - * - RETRO_ENVIRONMENT_GET_SAVE_DIRECTORY - */ - bool need_fullpath; - - /* If true, the frontend is not allowed to extract any archives before - * loading the real content. - * Necessary for certain libretro implementations that load games - * from zipped archives. */ - bool block_extract; -}; - -struct retro_game_geometry -{ - unsigned base_width; /* Nominal video width of game. */ - unsigned base_height; /* Nominal video height of game. */ - unsigned max_width; /* Maximum possible width of game. */ - unsigned max_height; /* Maximum possible height of game. */ - - float aspect_ratio; /* Nominal aspect ratio of game. If - * aspect_ratio is <= 0.0, an aspect ratio - * of base_width / base_height is assumed. - * A frontend could override this setting, - * if desired. */ -}; - -struct retro_system_timing -{ - double fps; /* FPS of video content. */ - double sample_rate; /* Sampling rate of audio. */ -}; - -struct retro_system_av_info -{ - struct retro_game_geometry geometry; - struct retro_system_timing timing; -}; - -struct retro_variable -{ - /* Variable to query in RETRO_ENVIRONMENT_GET_VARIABLE. - * If NULL, obtains the complete environment string if more - * complex parsing is necessary. - * The environment string is formatted as key-value pairs - * delimited by semicolons as so: - * "key1=value1;key2=value2;..." - */ - const char *key; - - /* Value to be obtained. If key does not exist, it is set to NULL. */ - const char *value; -}; - -struct retro_game_info -{ - const char *path; /* Path to game, UTF-8 encoded. - * Sometimes used as a reference for building other paths. - * May be NULL if game was loaded from stdin or similar, - * but in this case some cores will be unable to load `data`. - * So, it is preferable to fabricate something here instead - * of passing NULL, which will help more cores to succeed. - * retro_system_info::need_fullpath requires - * that this path is valid. */ - const void *data; /* Memory buffer of loaded game. Will be NULL - * if need_fullpath was set. */ - size_t size; /* Size of memory buffer. */ - const char *meta; /* String of implementation specific meta-data. */ -}; - -#define RETRO_MEMORY_ACCESS_WRITE (1 << 0) - /* The core will write to the buffer provided by retro_framebuffer::data. */ -#define RETRO_MEMORY_ACCESS_READ (1 << 1) - /* The core will read from retro_framebuffer::data. */ -#define RETRO_MEMORY_TYPE_CACHED (1 << 0) - /* The memory in data is cached. - * If not cached, random writes and/or reading from the buffer is expected to be very slow. */ -struct retro_framebuffer -{ - void *data; /* The framebuffer which the core can render into. - Set by frontend in GET_CURRENT_SOFTWARE_FRAMEBUFFER. - The initial contents of data are unspecified. */ - unsigned width; /* The framebuffer width used by the core. Set by core. */ - unsigned height; /* The framebuffer height used by the core. Set by core. */ - size_t pitch; /* The number of bytes between the beginning of a scanline, - and beginning of the next scanline. - Set by frontend in GET_CURRENT_SOFTWARE_FRAMEBUFFER. */ - enum retro_pixel_format format; /* The pixel format the core must use to render into data. - This format could differ from the format used in - SET_PIXEL_FORMAT. - Set by frontend in GET_CURRENT_SOFTWARE_FRAMEBUFFER. */ - - unsigned access_flags; /* How the core will access the memory in the framebuffer. - RETRO_MEMORY_ACCESS_* flags. - Set by core. */ - unsigned memory_flags; /* Flags telling core how the memory has been mapped. - RETRO_MEMORY_TYPE_* flags. - Set by frontend in GET_CURRENT_SOFTWARE_FRAMEBUFFER. */ -}; - -/* Callbacks */ - -/* Environment callback. Gives implementations a way of performing - * uncommon tasks. Extensible. */ -typedef bool (RETRO_CALLCONV *retro_environment_t)(unsigned cmd, void *data); - -/* Render a frame. Pixel format is 15-bit 0RGB1555 native endian - * unless changed (see RETRO_ENVIRONMENT_SET_PIXEL_FORMAT). - * - * Width and height specify dimensions of buffer. - * Pitch specifices length in bytes between two lines in buffer. - * - * For performance reasons, it is highly recommended to have a frame - * that is packed in memory, i.e. pitch == width * byte_per_pixel. - * Certain graphic APIs, such as OpenGL ES, do not like textures - * that are not packed in memory. - */ -typedef void (RETRO_CALLCONV *retro_video_refresh_t)(const void *data, unsigned width, - unsigned height, size_t pitch); - -/* Renders a single audio frame. Should only be used if implementation - * generates a single sample at a time. - * Format is signed 16-bit native endian. - */ -typedef void (RETRO_CALLCONV *retro_audio_sample_t)(int16_t left, int16_t right); - -/* Renders multiple audio frames in one go. - * - * One frame is defined as a sample of left and right channels, interleaved. - * I.e. int16_t buf[4] = { l, r, l, r }; would be 2 frames. - * Only one of the audio callbacks must ever be used. - */ -typedef size_t (RETRO_CALLCONV *retro_audio_sample_batch_t)(const int16_t *data, - size_t frames); - -/* Polls input. */ -typedef void (RETRO_CALLCONV *retro_input_poll_t)(void); - -/* Queries for input for player 'port'. device will be masked with - * RETRO_DEVICE_MASK. - * - * Specialization of devices such as RETRO_DEVICE_JOYPAD_MULTITAP that - * have been set with retro_set_controller_port_device() - * will still use the higher level RETRO_DEVICE_JOYPAD to request input. - */ -typedef int16_t (RETRO_CALLCONV *retro_input_state_t)(unsigned port, unsigned device, - unsigned index, unsigned id); - -/* Sets callbacks. retro_set_environment() is guaranteed to be called - * before retro_init(). - * - * The rest of the set_* functions are guaranteed to have been called - * before the first call to retro_run() is made. */ -RETRO_API void retro_set_environment(retro_environment_t); -RETRO_API void retro_set_video_refresh(retro_video_refresh_t); -RETRO_API void retro_set_audio_sample(retro_audio_sample_t); -RETRO_API void retro_set_audio_sample_batch(retro_audio_sample_batch_t); -RETRO_API void retro_set_input_poll(retro_input_poll_t); -RETRO_API void retro_set_input_state(retro_input_state_t); - -/* Library global initialization/deinitialization. */ -RETRO_API void retro_init(void); -RETRO_API void retro_deinit(void); - -/* Must return RETRO_API_VERSION. Used to validate ABI compatibility - * when the API is revised. */ -RETRO_API unsigned retro_api_version(void); - -/* Gets statically known system info. Pointers provided in *info - * must be statically allocated. - * Can be called at any time, even before retro_init(). */ -RETRO_API void retro_get_system_info(struct retro_system_info *info); - -/* Gets information about system audio/video timings and geometry. - * Can be called only after retro_load_game() has successfully completed. - * NOTE: The implementation of this function might not initialize every - * variable if needed. - * E.g. geom.aspect_ratio might not be initialized if core doesn't - * desire a particular aspect ratio. */ -RETRO_API void retro_get_system_av_info(struct retro_system_av_info *info); - -/* Sets device to be used for player 'port'. - * By default, RETRO_DEVICE_JOYPAD is assumed to be plugged into all - * available ports. - * Setting a particular device type is not a guarantee that libretro cores - * will only poll input based on that particular device type. It is only a - * hint to the libretro core when a core cannot automatically detect the - * appropriate input device type on its own. It is also relevant when a - * core can change its behavior depending on device type. - * - * As part of the core's implementation of retro_set_controller_port_device, - * the core should call RETRO_ENVIRONMENT_SET_INPUT_DESCRIPTORS to notify the - * frontend if the descriptions for any controls have changed as a - * result of changing the device type. - */ -RETRO_API void retro_set_controller_port_device(unsigned port, unsigned device); - -/* Resets the current game. */ -RETRO_API void retro_reset(void); - -/* Runs the game for one video frame. - * During retro_run(), input_poll callback must be called at least once. - * - * If a frame is not rendered for reasons where a game "dropped" a frame, - * this still counts as a frame, and retro_run() should explicitly dupe - * a frame if GET_CAN_DUPE returns true. - * In this case, the video callback can take a NULL argument for data. - */ -RETRO_API void retro_run(void); - -/* Returns the amount of data the implementation requires to serialize - * internal state (save states). - * Between calls to retro_load_game() and retro_unload_game(), the - * returned size is never allowed to be larger than a previous returned - * value, to ensure that the frontend can allocate a save state buffer once. - */ -RETRO_API size_t retro_serialize_size(void); - -/* Serializes internal state. If failed, or size is lower than - * retro_serialize_size(), it should return false, true otherwise. */ -RETRO_API bool retro_serialize(void *data, size_t size); -RETRO_API bool retro_unserialize(const void *data, size_t size); - -RETRO_API void retro_cheat_reset(void); -RETRO_API void retro_cheat_set(unsigned index, bool enabled, const char *code); - -/* Loads a game. - * Return true to indicate successful loading and false to indicate load failure. - */ -RETRO_API bool retro_load_game(const struct retro_game_info *game); - -/* Loads a "special" kind of game. Should not be used, - * except in extreme cases. */ -RETRO_API bool retro_load_game_special( - unsigned game_type, - const struct retro_game_info *info, size_t num_info -); - -/* Unloads the currently loaded game. Called before retro_deinit(void). */ -RETRO_API void retro_unload_game(void); - -/* Gets region of game. */ -RETRO_API unsigned retro_get_region(void); - -/* Gets region of memory. */ -RETRO_API void *retro_get_memory_data(unsigned id); -RETRO_API size_t retro_get_memory_size(unsigned id); - -#ifdef __cplusplus -} -#endif - -#endif diff --git a/frontend/libretro_core_options.h b/frontend/libretro_core_options.h new file mode 100644 index 0000000..38af23b --- /dev/null +++ b/frontend/libretro_core_options.h @@ -0,0 +1,902 @@ +#ifndef LIBRETRO_CORE_OPTIONS_H__ +#define LIBRETRO_CORE_OPTIONS_H__ + +#include <stdlib.h> +#include <string.h> + +#include <libretro.h> +#include <retro_inline.h> + +#ifdef __cplusplus +extern "C" { +#endif + +/* + ******************************** + * Core Option Definitions + ******************************** +*/ + +/* RETRO_LANGUAGE_ENGLISH */ + +/* Default language: + * - All other languages must include the same keys and values + * - Will be used as a fallback in the event that frontend language + * is not available + * - Will be used as a fallback for any missing entries in + * frontend language definition + */ + +#ifdef HAVE_PRE_ARMV7 +#define PSX_CLOCK_DEFAULT "50" +#define PSX_CLOCK_LABEL "Overclock or underclock the PSX clock. Default is 50" +#else +#define PSX_CLOCK_DEFAULT "57" +#define PSX_CLOCK_LABEL "Overclock or underclock the PSX clock. Default is 57" +#endif + +struct retro_core_option_definition option_defs_us[] = { + { + "pcsx_rearmed_frameskip", + "Frameskip", + "Choose how much frames should be skipped to improve performance at the expense of visual smoothness.", + { + { "0", NULL }, + { "1", NULL }, + { "2", NULL }, + { "3", NULL }, + { NULL, NULL}, + }, + "0", + }, + { + "pcsx_rearmed_bios", + "Use BIOS", + "Allows you to use real bios file (if available) or emulated bios (HLE). Its recommended to use official bios file for better compatibility.", + { + { "auto", "auto" }, + { "HLE", "hle" }, + { NULL, NULL}, + }, + "auto", + }, + { + "pcsx_rearmed_region", + "Region", + "Choose what region the system is from. 60 Hz for NTSC, 50 Hz for PAL.", + { + { "auto", "auto" }, + { "NTSC", "ntsc" }, + { "PAL", "pal" }, + { NULL, NULL}, + }, + "auto", + }, + { + "pcsx_rearmed_memcard2", + "Enable Second Memory Card (Shared)", + "Enabled the memory card slot 2. This memory card is shared amongs all games.", + { + { "disable", NULL }, + { "enabled", NULL }, + { NULL, NULL}, + }, + "disable", + }, + { + "pcsx_rearmed_pad1type", + "Pad 1 Type", + "Pad type for player 1", + { + { "standard", NULL }, + { "analog", NULL }, + { "dualshock", NULL }, + { "negcon", NULL }, + { "none", NULL }, + { NULL, NULL}, + }, + "standard", + }, + { + "pcsx_rearmed_pad2type", + "Pad 2 Type", + "Pad type for player 2", + { + { "standard", NULL }, + { "analog", NULL }, + { "dualshock", NULL }, + { "negcon", NULL }, + { "none", NULL }, + { NULL, NULL}, + }, + "standard", + }, + { + "pcsx_rearmed_pad3type", + "Pad 3 Type", + "Pad type for player 3", + { + { "standard", NULL }, + { "analog", NULL }, + { "dualshock", NULL }, + { "negcon", NULL }, + { "none", NULL }, + { NULL, NULL}, + }, + "none", + }, + { + "pcsx_rearmed_pad4type", + "Pad 4 Type", + "Pad type for player 4", + { + { "standard", NULL }, + { "analog", NULL }, + { "dualshock", NULL }, + { "negcon", NULL }, + { "none", NULL }, + { NULL, NULL}, + }, + "none", + }, + { + "pcsx_rearmed_pad5type", + "Pad 5 Type", + "Pad type for player 5", + { + { "standard", NULL }, + { "analog", NULL }, + { "dualshock", NULL }, + { "negcon", NULL }, + { "none", NULL }, + { NULL, NULL}, + }, + "none", + },{ + "pcsx_rearmed_pad6type", + "Pad 6 Type", + "Pad type for player 6", + { + { "standard", NULL }, + { "analog", NULL }, + { "dualshock", NULL }, + { "negcon", NULL }, + { "none", NULL }, + { NULL, NULL}, + }, + "none", + },{ + "pcsx_rearmed_pad7type", + "Pad 7 Type", + "Pad type for player 7", + { + { "standard", NULL }, + { "analog", NULL }, + { "dualshock", NULL }, + { "negcon", NULL }, + { "none", NULL }, + { NULL, NULL}, + }, + "none", + },{ + "pcsx_rearmed_pad8type", + "Pad 8 Type", + "Pad type for player 8", + { + { "standard", NULL }, + { "analog", NULL }, + { "dualshock", NULL }, + { "negcon", NULL }, + { "none", NULL }, + { NULL, NULL}, + }, + "none", + }, + { + "pcsx_rearmed_multitap1", + "Multitap 1", + "Enables/Disables multitap on port 1, allowing upto 5 players in games that permit it.", + { + { "auto", NULL }, + { "disabled", NULL }, + { "enabled", NULL }, + { NULL, NULL}, + }, + "auto", + }, + { + "pcsx_rearmed_multitap2", + "Multitap 2", + "Enables/Disables multitap on port 2, allowing upto 8 players in games that permit it. Multitap 1 has to be enabled for this to work.", + { + { "auto", NULL }, + { "disabled", NULL }, + { "enabled", NULL }, + { NULL, NULL}, + }, + "auto", + }, + { + "pcsx_rearmed_negcon_deadzone", + "NegCon Twist Deadzone (Percent)", + "Sets the deadzone of the RetroPad left analog stick when simulating the 'twist' action of emulated neGcon Controllers. Used to eliminate drift/unwanted input.", + { + { "0", NULL }, + { "5", NULL }, + { "10", NULL }, + { "15", NULL }, + { "20", NULL }, + { "25", NULL }, + { "30", NULL }, + { NULL, NULL}, + }, + "0", + }, + { + "pcsx_rearmed_negcon_response", + "NegCon Twist Response", + "Specifies the analog response when using a RetroPad left analog stick to simulate the 'twist' action of emulated neGcon Controllers.", + { + { "linear", NULL }, + { "quadratic", NULL }, + { "cubic", NULL }, + { NULL, NULL}, + }, + "linear", + }, + { + "pcsx_rearmed_vibration", + "Enable Vibration", + "Enables vibration feedback for controllers that supports vibration features.", + { + { "disabled", NULL }, + { "enabled", NULL }, + { NULL, NULL}, + }, + "enabled", + }, + { + "pcsx_rearmed_dithering", + "Enable Dithering", + "If Off, disables the dithering pattern the PSX applies to combat color banding.", + { + { "disabled", NULL }, + { "enabled", NULL }, + { NULL, NULL}, + }, + "enabled", + }, + +#ifndef DRC_DISABLE + { + "pcsx_rearmed_drc", + "Dynamic Recompiler", + "Enables core to use dynamic recompiler or interpreter (slower) cpu instructions.", + { + { "disabled", NULL }, + { "enabled", NULL }, + { NULL, NULL}, + }, + "enabled", + }, + { + "pcsx_rearmed_psxclock", + "PSX CPU Clock", + PSX_CLOCK_LABEL, + { + { "30", NULL }, + { "31", NULL }, + { "32", NULL }, + { "33", NULL }, + { "34", NULL }, + { "35", NULL }, + { "36", NULL }, + { "37", NULL }, + { "38", NULL }, + { "39", NULL }, + { "40", NULL }, + { "41", NULL }, + { "42", NULL }, + { "43", NULL }, + { "44", NULL }, + { "45", NULL }, + { "46", NULL }, + { "47", NULL }, + { "48", NULL }, + { "49", NULL }, + { "50", NULL }, + { "51", NULL }, + { "52", NULL }, + { "53", NULL }, + { "54", NULL }, + { "55", NULL }, + { "56", NULL }, + { "57", NULL }, + { "58", NULL }, + { "59", NULL }, + { "60", NULL }, + { "61", NULL }, + { "62", NULL }, + { "63", NULL }, + { "64", NULL }, + { "65", NULL }, + { "66", NULL }, + { "67", NULL }, + { "68", NULL }, + { "69", NULL }, + { "70", NULL }, + { "71", NULL }, + { "72", NULL }, + { "73", NULL }, + { "74", NULL }, + { "75", NULL }, + { "76", NULL }, + { "77", NULL }, + { "78", NULL }, + { "79", NULL }, + { "80", NULL }, + { "81", NULL }, + { "82", NULL }, + { "83", NULL }, + { "84", NULL }, + { "85", NULL }, + { "86", NULL }, + { "87", NULL }, + { "88", NULL }, + { "89", NULL }, + { "90", NULL }, + { "91", NULL }, + { "92", NULL }, + { "93", NULL }, + { "94", NULL }, + { "95", NULL }, + { "96", NULL }, + { "97", NULL }, + { "98", NULL }, + { "99", NULL }, + { "100", NULL }, + { NULL, NULL}, + }, + PSX_CLOCK_DEFAULT, + }, +#endif /* DRC_DISABLE */ + +#ifdef __ARM_NEON__ + { + "pcsx_rearmed_neon_interlace_enable", + "Enable Interlacing Mode", + "Enables fake scanlines effect.", + { + { "disabled", NULL }, + { "enabled", NULL }, + { NULL, NULL}, + }, + "disabled", + }, + { + "pcsx_rearmed_neon_enhancement_enable", + "Enhanced Resolution (Slow)", + "Renders in double resolution at the cost of lower performance", + { + { "disabled", NULL }, + { "enabled", NULL }, + { NULL, NULL}, + }, + "disabled", + }, + { + "pcsx_rearmed_neon_enhancement_no_main", + "Enhanced Resolution (Speed Hack)", + "Speed hack for Enhanced resolution option (glitches some games).", + { + { "disabled", NULL }, + { "enabled", NULL }, + { NULL, NULL}, + }, + "disabled", + }, +#endif /* __ARM_NEON__ */ + + { + "pcsx_rearmed_duping_enable", + "Frame Duping", + "A speedup, redraws/reuses the last frame if there was no new data.", + { + { "disabled", NULL }, + { "enabled", NULL }, + { NULL, NULL}, + }, + "enabled", + }, + { + "pcsx_rearmed_display_internal_fps", + "Display Internal FPS", + "Shows an on-screen frames per second counter when enabled.", + { + { "disabled", NULL }, + { "enabled", NULL }, + { NULL, NULL}, + }, + "disabled", + }, + + /* GPU PEOPS OPTIONS */ +#ifdef DRC_DISABLE + { + "pcsx_rearmed_show_gpu_peops_settings", + "Show Advance GPU Settings", + "Enable or disable various gpu fixes. A core restart might be needed for settings to take effect. NOTE: Quick Menu must be toggled for this setting to take effect.", + { + { "disabled", NULL }, + { "enabled", NULL }, + { NULL, NULL}, + }, + "disabled", + }, + { + "pcsx_rearmed_gpu_peops_fix_0", + "(GPU) Odd/Even Bit Hack", + "Needed for Chrono Cross.", + { + { "disabled", NULL }, + { "enabled", NULL }, + { NULL, NULL}, + }, + "disabled", + }, + { + "pcsx_rearmed_gpu_peops_fix_1", + "(GPU) Expand Screen Width", + "Capcom fighting games", + { + { "disabled", NULL }, + { "enabled", NULL }, + { NULL, NULL}, + }, + "disabled", + }, + { + "pcsx_rearmed_gpu_peops_fix_2", + "(GPU) Ignore Brightness Color", + "Black screens in Lunar", + { + { "disabled", NULL }, + { "enabled", NULL }, + { NULL, NULL}, + }, + "disabled", + }, + { + "pcsx_rearmed_gpu_peops_fix_3", + "(GPU) Disable Coordinate Check", + "Compatibility mode", + { + { "disabled", NULL }, + { "enabled", NULL }, + { NULL, NULL}, + }, + "disabled", + }, + { + "pcsx_rearmed_gpu_peops_fix_6", + "(GPU) Lazy Screen Update", + "Pandemonium 2", + { + { "disabled", NULL }, + { "enabled", NULL }, + { NULL, NULL}, + }, + "disabled", + }, + { + "pcsx_rearmed_gpu_peops_fix_7", + "(GPU) Old Frame Skipping", + "Skip every second frame", + { + { "disabled", NULL }, + { "enabled", NULL }, + { NULL, NULL}, + }, + "enabled", + }, + { + "pcsx_rearmed_gpu_peops_fix_8", + "(GPU) Repeated Flat Tex Triangles", + "Needed by Dark Forces", + { + { "disabled", NULL }, + { "enabled", NULL }, + { NULL, NULL}, + }, + "disabled", + }, + { + "pcsx_rearmed_gpu_peops_fix_9", + "(GPU) Draw Quads with Triangles", + "Better g-colors, worse textures", + { + { "disabled", NULL }, + { "enabled", NULL }, + { NULL, NULL}, + }, + "disabled", + }, + { + "pcsx_rearmed_gpu_peops_fix_10", + "(GPU) Fake 'Gpu Busy' States", + "Toggle busy flags after drawing", + { + { "disabled", NULL }, + { "enabled", NULL }, + { NULL, NULL}, + }, + "disabled", + }, +#endif + + { + "pcsx_rearmed_show_bios_bootlogo", + "Show Bios Bootlogo", + "When enabled, shows the playstation logo when starting or resetting. (Breaks some games).", + { + { "disabled", NULL }, + { "enabled", NULL }, + { NULL, NULL}, + }, + "disabled", + }, + { + "pcsx_rearmed_spu_reverb", + "Sound Reverb", + "Enables or disables audio reverb effect.", + { + { "disabled", NULL }, + { "enabled", NULL }, + { NULL, NULL}, + }, + "enabled", + }, + { + "pcsx_rearmed_spu_interpolation", + "Sound Interpolation", + NULL, + { + { "simple", NULL }, + { "gaussian", NULL }, + { "cubic", NULL }, + { "off", NULL }, + { NULL, NULL}, + }, + "simple", + }, + { + "pcsx_rearmed_idiablofix", + "Diablo Music Fix", + NULL, + { + { "disabled", NULL }, + { "enabled", NULL }, + { NULL, NULL}, + }, + "disabled", + }, + { + "pcsx_rearmed_pe2_fix", + "Parasite Eve 2/Vandal Hearts 1/2 Fix", + NULL, + { + { "disabled", NULL }, + { "enabled", NULL }, + { NULL, NULL}, + }, + "disabled", + }, + { + "pcsx_rearmed_inuyasha_fix", + "InuYasha Sengoku Battle Fix", + NULL, + { + { "disabled", NULL }, + { "enabled", NULL }, + { NULL, NULL}, + }, + "disabled", + }, + + /* ADVANCED OPTIONS */ + { + "pcsx_rearmed_noxadecoding", + "XA Decoding", + NULL, + { + { "disabled", NULL }, + { "enabled", NULL }, + { NULL, NULL}, + }, + "enabled", + }, + { + "pcsx_rearmed_nocdaudio", + "CD Audio", + NULL, + { + { "disabled", NULL }, + { "enabled", NULL }, + { NULL, NULL}, + }, + "enabled", + }, + +#ifndef DRC_DISABLE + { + "pcsx_rearmed_nosmccheck", + "(Speed Hack) Disable SMC Checks", + "Will cause crashes when loading, break memcards.", + { + { "disabled", NULL }, + { "enabled", NULL }, + { NULL, NULL}, + }, + "disabled", + }, + { + "pcsx_rearmed_gteregsunneeded", + "(Speed Hack) Assume GTE Regs Unneeded", + "May cause graphical glitches.", + { + { "disabled", NULL }, + { "enabled", NULL }, + { NULL, NULL}, + }, + "disabled", + }, + { + "pcsx_rearmed_nogteflags", + "(Speed Hack) Disable GTE Flags", + "Will cause graphical glitches.", + { + { "disabled", NULL }, + { "enabled", NULL }, + { NULL, NULL}, + }, + "disabled", + }, +#endif /* DRC_DISABLE */ + + { NULL, NULL, NULL, { NULL, NULL }, NULL }, +}; + +/* RETRO_LANGUAGE_JAPANESE */ + +/* RETRO_LANGUAGE_FRENCH */ + +/* RETRO_LANGUAGE_SPANISH */ + +/* RETRO_LANGUAGE_GERMAN */ + +/* RETRO_LANGUAGE_ITALIAN */ + +/* RETRO_LANGUAGE_DUTCH */ + +/* RETRO_LANGUAGE_PORTUGUESE_BRAZIL */ + +/* RETRO_LANGUAGE_PORTUGUESE_PORTUGAL */ + +/* RETRO_LANGUAGE_RUSSIAN */ + +/* RETRO_LANGUAGE_KOREAN */ + +/* RETRO_LANGUAGE_CHINESE_TRADITIONAL */ + +/* RETRO_LANGUAGE_CHINESE_SIMPLIFIED */ + +/* RETRO_LANGUAGE_ESPERANTO */ + +/* RETRO_LANGUAGE_POLISH */ + +/* RETRO_LANGUAGE_VIETNAMESE */ + +/* RETRO_LANGUAGE_ARABIC */ + +/* RETRO_LANGUAGE_GREEK */ + +/* RETRO_LANGUAGE_TURKISH */ + +/* + ******************************** + * Language Mapping + ******************************** +*/ + +struct retro_core_option_definition *option_defs_intl[RETRO_LANGUAGE_LAST] = { + option_defs_us, /* RETRO_LANGUAGE_ENGLISH */ + NULL, /* RETRO_LANGUAGE_JAPANESE */ + NULL, /* RETRO_LANGUAGE_FRENCH */ + NULL, /* RETRO_LANGUAGE_SPANISH */ + NULL, /* RETRO_LANGUAGE_GERMAN */ + NULL, /* RETRO_LANGUAGE_ITALIAN */ + NULL, /* RETRO_LANGUAGE_DUTCH */ + NULL, /* RETRO_LANGUAGE_PORTUGUESE_BRAZIL */ + NULL, /* RETRO_LANGUAGE_PORTUGUESE_PORTUGAL */ + NULL, /* RETRO_LANGUAGE_RUSSIAN */ + NULL, /* RETRO_LANGUAGE_KOREAN */ + NULL, /* RETRO_LANGUAGE_CHINESE_TRADITIONAL */ + NULL, /* RETRO_LANGUAGE_CHINESE_SIMPLIFIED */ + NULL, /* RETRO_LANGUAGE_ESPERANTO */ + NULL, /* RETRO_LANGUAGE_POLISH */ + NULL, /* RETRO_LANGUAGE_VIETNAMESE */ + NULL, /* RETRO_LANGUAGE_ARABIC */ + NULL, /* RETRO_LANGUAGE_GREEK */ + NULL, /* RETRO_LANGUAGE_TURKISH */ +}; + +/* + ******************************** + * Functions + ******************************** +*/ + +/* Handles configuration/setting of core options. + * Should only be called inside retro_set_environment(). + * > We place the function body in the header to avoid the + * necessity of adding more .c files (i.e. want this to + * be as painless as possible for core devs) + */ + +static INLINE void libretro_set_core_options(retro_environment_t environ_cb) +{ + unsigned version = 0; + + if (!environ_cb) + return; + + if (environ_cb(RETRO_ENVIRONMENT_GET_CORE_OPTIONS_VERSION, &version) && (version == 1)) + { + struct retro_core_options_intl core_options_intl; + unsigned language = 0; + + core_options_intl.us = option_defs_us; + core_options_intl.local = NULL; + + if (environ_cb(RETRO_ENVIRONMENT_GET_LANGUAGE, &language) && + (language < RETRO_LANGUAGE_LAST) && (language != RETRO_LANGUAGE_ENGLISH)) + core_options_intl.local = option_defs_intl[language]; + + environ_cb(RETRO_ENVIRONMENT_SET_CORE_OPTIONS_INTL, &core_options_intl); + } + else + { + size_t i; + size_t option_index = 0; + size_t num_options = 0; + struct retro_variable *variables = NULL; + char **values_buf = NULL; + + /* Determine number of options + * > Note: We are going to skip a number of irrelevant + * core options when building the retro_variable array, + * but we'll allocate space for all of them. The difference + * in resource usage is negligible, and this allows us to + * keep the code 'cleaner' */ + while (true) + { + if (option_defs_us[num_options].key) + num_options++; + else + break; + } + + /* Allocate arrays */ + variables = (struct retro_variable *)calloc(num_options + 1, sizeof(struct retro_variable)); + values_buf = (char **)calloc(num_options, sizeof(char *)); + + if (!variables || !values_buf) + goto error; + + /* Copy parameters from option_defs_us array */ + for (i = 0; i < num_options; i++) + { + const char *key = option_defs_us[i].key; + const char *desc = option_defs_us[i].desc; + const char *default_value = option_defs_us[i].default_value; + struct retro_core_option_value *values = option_defs_us[i].values; + size_t buf_len = 3; + size_t default_index = 0; + + values_buf[i] = NULL; + + /* Skip options that are irrelevant when using the + * old style core options interface */ + if ((strcmp(key, "pcsx_rearmed_show_gpu_peops_settings") == 0)) + continue; + + if (desc) + { + size_t num_values = 0; + + /* Determine number of values */ + while (true) + { + if (values[num_values].value) + { + /* Check if this is the default value */ + if (default_value) + if (strcmp(values[num_values].value, default_value) == 0) + default_index = num_values; + + buf_len += strlen(values[num_values].value); + num_values++; + } + else + break; + } + + /* Build values string */ + if (num_values > 1) + { + size_t j; + + buf_len += num_values - 1; + buf_len += strlen(desc); + + values_buf[i] = (char *)calloc(buf_len, sizeof(char)); + if (!values_buf[i]) + goto error; + + strcpy(values_buf[i], desc); + strcat(values_buf[i], "; "); + + /* Default value goes first */ + strcat(values_buf[i], values[default_index].value); + + /* Add remaining values */ + for (j = 0; j < num_values; j++) + { + if (j != default_index) + { + strcat(values_buf[i], "|"); + strcat(values_buf[i], values[j].value); + } + } + } + } + + variables[option_index].key = key; + variables[option_index].value = values_buf[i]; + option_index++; + } + + /* Set variables */ + environ_cb(RETRO_ENVIRONMENT_SET_VARIABLES, variables); + +error: + + /* Clean up */ + if (values_buf) + { + for (i = 0; i < num_options; i++) + { + if (values_buf[i]) + { + free(values_buf[i]); + values_buf[i] = NULL; + } + } + + free(values_buf); + values_buf = NULL; + } + + if (variables) + { + free(variables); + variables = NULL; + } + } +} + +#ifdef __cplusplus +} +#endif + +#endif |