diff options
author | Max Horn | 2003-10-01 20:59:05 +0000 |
---|---|---|
committer | Max Horn | 2003-10-01 20:59:05 +0000 |
commit | 80eb1f8cb91026234cf7f080c50c8623f0061ee4 (patch) | |
tree | 8c5565550d2fd3318f2cd43e8dda3545d4658244 /common/scaler | |
parent | 9c301608daaebab809fcffe900d1e77dca6b519f (diff) | |
download | scummvm-rg350-80eb1f8cb91026234cf7f080c50c8623f0061ee4.tar.gz scummvm-rg350-80eb1f8cb91026234cf7f080c50c8623f0061ee4.tar.bz2 scummvm-rg350-80eb1f8cb91026234cf7f080c50c8623f0061ee4.zip |
sync with hq2x (in particular, use my Altivec code here, too
svn-id: r10529
Diffstat (limited to 'common/scaler')
-rw-r--r-- | common/scaler/hq3x.cpp | 151 |
1 files changed, 122 insertions, 29 deletions
diff --git a/common/scaler/hq3x.cpp b/common/scaler/hq3x.cpp index 39be5e4f98..46ccc2e327 100644 --- a/common/scaler/hq3x.cpp +++ b/common/scaler/hq3x.cpp @@ -86,7 +86,6 @@ */ template<int bitFormat> void HQ3x(const uint8 *srcPtr, uint32 srcPitch, uint8 *dstPtr, uint32 dstPitch, int width, int height) { -// int w[10]; register int w1, w2, w3, w4, w5, w6, w7, w8, w9; const uint32 nextlineSrc = srcPitch / sizeof(uint16); @@ -95,19 +94,6 @@ void HQ3x(const uint8 *srcPtr, uint32 srcPitch, uint8 *dstPtr, uint32 dstPitch, const uint32 nextlineDst = dstPitch / sizeof(uint16); const uint32 nextlineDst2 = 2 * nextlineDst; uint16 *q = (uint16 *)dstPtr; - - // TODO: The YUV access could be finetuned and optimized; depending on the - // target processor, various different courses could prove to be "best". - // For example, it might be better to get rid of the RGBtoYUV table - it - // is 256kb big, which is be a problem for processors with a small cache. - // For those, doing the YUV conversion on the fly might be faster. On the - // other end of spectrum, for procs with large cache, getting rid of yuv[] - // might better - just always write RGBtoYUV[w[idx]]. - // - // Maybe we can reduce the size of RGBtoYUV to half its size since - // diffYUV doesn't need full 8 bits for each component - - // +----+----+----+ // | | | | @@ -120,34 +106,131 @@ void HQ3x(const uint8 *srcPtr, uint32 srcPitch, uint8 *dstPtr, uint32 dstPitch, // | w7 | w8 | w9 | // +----+----+----+ +#if USE_ALTIVEC + // TODO: + // * come up with a plan that allows the AltiVec/MMX/SSE/other asm to be + // compiled *in addition to* the C++ code. This is necessary since e.g. + // not all PowerPC processors support AltiVec, and when run on those, + // ScummVM should fallback to the "plain" scalers. + // This "switch" could be done in the wrapper HQ2x method (just like it + // also switches between 555 and 565 there). + // * add code to configure which detects whether AltiVec/MMX asm may be + // compiled in at all (and also add explicit --disable-asm option) + // * ... + + // The YUV threshold. + static const vector unsigned char vThreshold = (vector unsigned char)((vector unsigned int)0x00300706); + + // Bit pattern mask. + static const vector signed int vPatternMask1 = (vector signed int)(0x01,0x02,0x04,0x08); + static const vector signed int vPatternMask2 = (vector signed int)(0x10,0x20,0x40,0x80); + + // Permutation masks for the incremental vector loading (see below for more information). + static const vector unsigned char vPermuteToV1234 = (vector unsigned char)( 4, 5, 6, 7, 8,9,10,11, 20,21,22,23, 16,17,18,19); + static const vector unsigned char vPermuteToV6789 = (vector unsigned char)(24,25,26,27, 8,9,10,11, 12,13,14,15, 28,29,30,31); + + // The YUV vectors. + vector signed char vecYUV5555; + vector signed char vecYUV1234; + vector signed char vecYUV6789; +#endif + while (height--) { - w2 = *(p - 1 - nextlineSrc); - w5 = *(p - 1); - w8 = *(p - 1 + nextlineSrc); + w1 = *(p - 1 - nextlineSrc); + w4 = *(p - 1); + w7 = *(p - 1 + nextlineSrc); + + w2 = *(p - nextlineSrc); + w5 = *(p); + w8 = *(p + nextlineSrc); + +#if USE_ALTIVEC + // Load inital values of vecYUV1234 / vecYUV6789 + const int arr1234[4] = {0, YUV(1), YUV(2), 0}; + const int arr6789[4] = {YUV(5), 0, YUV(7), YUV(8)}; - w3 = *(p - nextlineSrc); - w6 = *(p); - w9 = *(p + nextlineSrc); + vecYUV1234 = *(const vector signed char *)arr1234; + vecYUV6789 = *(const vector signed char *)arr6789; +#endif int tmpWidth = width; while (tmpWidth--) { p++; - w1 = w2; - w4 = w5; - w7 = w8; - - w2 = w3; - w5 = w6; - w8 = w9; - w3 = *(p - nextlineSrc); w6 = *(p); w9 = *(p + nextlineSrc); int pattern = 0; - const int yuv5 = YUV(5); +#if USE_ALTIVEC + /* + Consider this peephole into the image buffer: + +----+----+----+----+ + | | | | | + | w00| w01| w02| w03| + +----+----+----+----+ + | | | | | + | w10| w11| w12| w13| + +----+----+----+----+ + | | | | | + | w20| w21| w22| w23| + +----+----+----+----+ + + In the previous loop iteration, w11 was the center point, and our + vectors contain the following data from the previous iteration: + vecYUV5555 = { w11, w11, w11, w11 } + vecYUV1234 = { w00, w01, w02, w10 } + vecYUV6789 = { w12, w20, w21, w22 } + + Now we have the new center point w12, and we would like to have + the following values in our vectors: + vecYUV5555 = { w12, w12, w12, w12 } + vecYUV1234 = { w01, w02, w03, w11 } + vecYUV6789 = { w13, w21, w22, w23 } + + To this end we load a single new vector: + vTmp = { w11, w03, w13, w23 } + + We then can compute all the new vector values using permutations only: + vecYUV5555 = { vecYUV6789[0], vecYUV6789[0], vecYUV6789[0], vecYUV6789[0] } + vecYUV1234 = { vecYUV1234[1], vecYUV1234[2], vTmp[1], vTmp[0] } + vecYUV6789 = { vTmp[2], vecYUV6789[2], vecYUV6789[3], vTmp[3] } + + Beautiful, isn't it? :-) + */ + + // Load the new values into a temporary vector (see above for an explanation) + const int tmpArr[4] = {YUV(4), YUV(3), YUV(6), YUV(9)}; + vector signed char vTmp = *(const vector signed char *)tmpArr; + + // Next update the data vectors + vecYUV5555 = (vector signed char)vec_splat((vector unsigned int)vecYUV6789, 0); + vecYUV1234 = vec_perm(vecYUV1234, vTmp, vPermuteToV1234); + vecYUV6789 = vec_perm(vecYUV6789, vTmp, vPermuteToV6789); + + // Compute the absolute difference between the center point's YUV and the outer points + const vector signed char vDiff1 = vec_abs(vec_sub(vecYUV5555, vecYUV1234)); + const vector signed char vDiff2 = vec_abs(vec_sub(vecYUV5555, vecYUV6789)); + + // Compare the difference to the threshold (byte-wise) + const vector bool char vCmp1 = vec_cmpgt((vector unsigned char)vDiff1, vThreshold); + const vector bool char vCmp2 = vec_cmpgt((vector unsigned char)vDiff2, vThreshold); + + // Convert all non-zero (long) vector elements to 0xF...F, keep 0 at 0. + // Then and in the patter masks. The idea is that for 0 components, we get 0, + // while for the other components we get exactly the mask value. + const vector signed int vPattern1 = vec_and(vec_cmpgt((vector unsigned int)vCmp1, (vector unsigned int)0), vPatternMask1); + const vector signed int vPattern2 = vec_and(vec_cmpgt((vector unsigned int)vCmp2, (vector unsigned int)0), vPatternMask2); + + // Now sum up the components of all vectors. Since our pattern mask values + // are all "orthogonal", this is effectively the same as ORing them all + // together. In the end, the rightmost word of vSum contains the 'pattern' + vector signed int vSum = vec_sums(vPattern1, (vector signed int)0); + vSum = vec_sums(vPattern2, vSum); + pattern = ((int *)&vSum)[3]; +#else + const int yuv5 = YUV(5); if (w5 != w1 && diffYUV(yuv5, YUV(1))) pattern |= 0x0001; if (w5 != w2 && diffYUV(yuv5, YUV(2))) pattern |= 0x0002; if (w5 != w3 && diffYUV(yuv5, YUV(3))) pattern |= 0x0004; @@ -156,6 +239,7 @@ void HQ3x(const uint8 *srcPtr, uint32 srcPitch, uint8 *dstPtr, uint32 dstPitch, if (w5 != w7 && diffYUV(yuv5, YUV(7))) pattern |= 0x0020; if (w5 != w8 && diffYUV(yuv5, YUV(8))) pattern |= 0x0040; if (w5 != w9 && diffYUV(yuv5, YUV(9))) pattern |= 0x0080; +#endif switch (pattern) { case 0: @@ -2921,6 +3005,15 @@ void HQ3x(const uint8 *srcPtr, uint32 srcPitch, uint8 *dstPtr, uint32 dstPitch, } break; } + + w1 = w2; + w4 = w5; + w7 = w8; + + w2 = w3; + w5 = w6; + w8 = w9; + q += 3; } p += nextlineSrc - width; |