aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--engines/kyra/sound_adlib.cpp189
1 files changed, 91 insertions, 98 deletions
diff --git a/engines/kyra/sound_adlib.cpp b/engines/kyra/sound_adlib.cpp
index 49ba895cb1..70bb0eee26 100644
--- a/engines/kyra/sound_adlib.cpp
+++ b/engines/kyra/sound_adlib.cpp
@@ -148,8 +148,7 @@ private:
void stateCallback2_1(OutputState& state);
void resetAdlibState();
- void output0x388(uint16 word);
- void waitLoops(int count);
+ void writeOPL(byte reg, byte val);
void initTable(OutputState &table);
void unkOutput1(OutputState &table);
void unkOutput2(uint8 num);
@@ -613,39 +612,33 @@ void AdlibDriver::callbackProcess() {
void AdlibDriver::resetAdlibState() {
debugC(9, kDebugLevelSound, "resetAdlibState()");
_unk6 = 0x1234;
- output0x388(0x0120);
- output0x388(0x0800);
- output0x388(0xBD00);
+
+ // Authorize the control of the waveforms
+ writeOPL(0x01, 0x20);
+
+ // Select FM music mode
+ writeOPL(0x08, 0x00);
+
+ // I would guess the main purpose of this is to turn off the rhythm,
+ // thus allowing us to use 9 melodic voices instead of 6.
+ writeOPL(0xBD, 0x00);
+
int loop = 10;
while (loop--) {
if (loop != 9) {
- output0x388(((_outputTable[loop] + 0x40) << 8) | 0x3F);
- output0x388(((_outputTable[loop] + 0x43) << 8) | 0x3F);
+ // Silence the channel
+ writeOPL(0x40 + _outputTable[loop], 0x3F);
+ writeOPL(0x43 + _outputTable[loop], 0x3F);
}
initTable(_outputTables[loop]);
}
}
-void AdlibDriver::output0x388(uint16 word) {
- // 0x388 - Adress/Status port (R/W)
- // 0x389 - Data port (W/O)
+// Old calling style: output0x388(0xABCD)
+// New calling style: writeOPL(0xAB, 0xCD)
- // The "wait loops" are there to allow the hardware enough time to
- // register that it has been written to. I don't think we do that in
- // any of the other ScummVM Adlib players, so it might not be
- // necessary. On the other hand, it shouldn't do any harm either, so
- // let's keep it for now. Until the music works properly, at least.
-
- OPLWrite(_adlib, 0x388, (word >> 8) & 0xFF);
- waitLoops(4);
- OPLWrite(_adlib, 0x389, word & 0xFF);
- waitLoops(23);
-}
-
-void AdlibDriver::waitLoops(int count) {
- while (count--) {
- OPLRead(_adlib, 0x388);
- }
+void AdlibDriver::writeOPL(byte reg, byte val) {
+ OPLWriteReg(_adlib, reg, val);
}
void AdlibDriver::initTable(OutputState &table) {
@@ -667,14 +660,11 @@ void AdlibDriver::unkOutput1(OutputState &table) {
if (_unk4 && _curTable >= 6)
return;
- // Octave / F-Number / Key-On
- uint16 output = (_curTable + 0xB0) << 8;
-
// This means the "Key On" bit will always be 0
table.unkOutputValue1 &= 0xDF;
- output |= table.unkOutputValue1;
- output0x388(output);
+ // Octave / F-Number / Key-On
+ writeOPL(0xB0 + _curTable, table.unkOutputValue1);
}
void AdlibDriver::unkOutput2(uint8 num) {
@@ -686,20 +676,20 @@ void AdlibDriver::unkOutput2(uint8 num) {
uint8 value = _outputTable[num];
// Clear the Attack Rate / Decay Rate for the channel
- output0x388(((value + 0x60) << 8) | 0xFF);
- output0x388(((value + 0x63) << 8) | 0xFF);
+ writeOPL(0x60 + value, 0xFF);
+ writeOPL(0x63 + value, 0xFF);
// Clear the Sustain Level / Release Rate for the channel
- output0x388(((value + 0x80) << 8) | 0xFF);
- output0x388(((value + 0x83) << 8) | 0xFF);
+ writeOPL(0x80 + value, 0xFF);
+ writeOPL(0x83 + value, 0xFF);
// Octave / F-Number / Key-On
// The purpose of this seems to be to first clear everything, and then
// set the octave.
- output0x388(((num + 0xB0) << 8) | 0x00);
- output0x388(((num + 0xB0) << 8) | 0x20);
+ writeOPL(0xB0 + num, 0x00);
+ writeOPL(0xB0 + num, 0x20);
}
uint16 AdlibDriver::updateUnk6Value() {
@@ -767,42 +757,42 @@ void AdlibDriver::updateAndOutput1(uint8 unk1, OutputState &state) {
state.unk17 = value & 0xFF;
// Octave / F-Number / Key-On
- output0x388(((0xA0 + _curTable) << 8) | state.unk17);
- output0x388(((0xB0 + _curTable) << 8) | state.unkOutputValue1);
+ writeOPL(0xA0 + _curTable, state.unk17);
+ writeOPL(0xB0 + _curTable, state.unkOutputValue1);
}
void AdlibDriver::updateAndOutput2(uint8 unk1, uint8 *dataptr, OutputState &state) {
debugC(9, kDebugLevelSound, "updateAndOutput2(%d, 0x%X, %d)", unk1, dataptr, &state - _outputTables);
// Amplitude Modulation / Vibrato / Envelope Generator Type /
// Keyboard Scaling Rate / Modulator Frequency Multiple
- output0x388(((0x20 + unk1) << 8) | *dataptr++);
- output0x388(((0x23 + unk1) << 8) | *dataptr++);
+ writeOPL(0x20 + unk1, *dataptr++);
+ writeOPL(0x23 + unk1, *dataptr++);
uint8 temp = *dataptr++;
// Feedback / Algorithm
- output0x388(((0xC0 + _curTable) << 8) | temp);
+ writeOPL(0xC0 + _curTable, temp);
state.unk23 = temp & 1;
// Waveform Select
- output0x388(((0xE0 + unk1) << 8) | *dataptr++);
- output0x388(((0xE3 + unk1) << 8) | *dataptr++);
+ writeOPL(0xE0 + unk1, *dataptr++);
+ writeOPL(0xE3 + unk1, *dataptr++);
state.unk24 = *dataptr++;
state.unk25 = *dataptr++;
// Level Key Scaling / Total Level
- output0x388(((0x40 + unk1) << 8) | calculateLowByte1(state));
- output0x388(((0x43 + unk1) << 8) | calculateLowByte2(state));
+ writeOPL(0x40 + unk1, calculateLowByte1(state));
+ writeOPL(0x43 + unk1, calculateLowByte2(state));
// Attack Rate / Decay Rate
- output0x388(((0x60 + unk1) << 8) | *dataptr++);
- output0x388(((0x63 + unk1) << 8) | *dataptr++);
+ writeOPL(0x60 + unk1, *dataptr++);
+ writeOPL(0x63 + unk1, *dataptr++);
// Sustain Level / Release Rate
- output0x388(((0x80 + unk1) << 8) | *dataptr++);
- output0x388(((0x83 + unk1) << 8) | *dataptr++);
+ writeOPL(0x80 + unk1, *dataptr++);
+ writeOPL(0x83 + unk1, *dataptr++);
}
void AdlibDriver::updateAndOutput3(OutputState &state) {
@@ -811,7 +801,7 @@ void AdlibDriver::updateAndOutput3(OutputState &state) {
state.unkOutputValue1 |= 0x20;
// Octave / F-Number / Key-On
- output0x388(((0xB0 + _curTable) << 8) | state.unkOutputValue1);
+ writeOPL(0xB0 + _curTable, state.unkOutputValue1);
int8 shift = 9 - state.unk33;
uint16 temp = state.unk17 | (state.unkOutputValue1 << 8);
@@ -824,12 +814,12 @@ void AdlibDriver::output1(OutputState &state) {
uint8 lowByte = calculateLowByte2(state);
// Level Key Scaling / Total Level
- output0x388(((0x43 + _outputTable[_curTable]) << 8) | lowByte);
+ writeOPL(0x43 + _outputTable[_curTable], lowByte);
if (state.unk23) {
lowByte = calculateLowByte1(state);
// Level Key Scaling / Total Level
- output0x388(((0x40 + _outputTable[_curTable]) << 8) | lowByte);
+ writeOPL(0x40 + _outputTable[_curTable], lowByte);
}
}
@@ -863,13 +853,14 @@ void AdlibDriver::stateCallback1_1(OutputState &state) {
}
unk1 &= 0x3FF;
- output0x388(((0xA0 + _curTable) << 8) | (unk1 & 0xFF));
+ writeOPL(0xA0 + _curTable, unk1 & 0xFF);
state.unk17 = unk1 & 0xFF;
uint8 value = unk1 >> 8;
value |= (unk2 >> 8) & 0xFF;
value |= unk2 & 0xFF;
- output0x388(((0xB0 + _curTable) << 8) | value);
+
+ writeOPL(0xB0 + _curTable, value);
state.unkOutputValue1 = value;
}
@@ -897,8 +888,8 @@ void AdlibDriver::stateCallback1_2(OutputState &state) {
state.unkOutputValue1 = (state.unkOutputValue1 & 0xFC) | (temp3 >> 8);
// Octave / F-Number / Key-On
- output0x388(((0xA0 + _curTable) << 8) | state.unkOutputValue1);
- output0x388(((0xB0 + _curTable) << 8) | state.unkOutputValue1);
+ writeOPL(0xA0 + _curTable, state.unkOutputValue1);
+ writeOPL(0xB0 + _curTable, state.unkOutputValue1);
}
}
@@ -909,9 +900,7 @@ void AdlibDriver::stateCallback2_1(OutputState &state) {
if ((--state.unk21) & 0x80) {
state.unk21 = state.unk20;
}
- uint16 value = (state.unk22 + _unkOutputByte1) << 8;
- value |= (_soundData/*state.dataptr:segment*/ + state.offset)[state.unk21];
- output0x388(value);
+ writeOPL(state.unk22 + _unkOutputByte1, _soundData[state.offset + state.unk21]);
}
}
@@ -1030,7 +1019,7 @@ int AdlibDriver::updateCallback10(uint8 *&dataptr, OutputState &state, uint8 val
}
int AdlibDriver::update_writeAdlib(uint8 *&dataptr, OutputState &state, uint8 value) {
- output0x388((value << 8) || *dataptr++);
+ writeOPL(value, *dataptr++);
return 0;
}
@@ -1217,7 +1206,7 @@ int AdlibDriver::update_setAMDepth(uint8 *&dataptr, OutputState &state, uint8 va
_unkOutputByte2 &= 0x7F;
// The AM Depth bit is set or cleared, the others remain unchanged
- output0x388(0xBD00 | _unkOutputByte2);
+ writeOPL(0xBD, _unkOutputByte2);
return 0;
}
@@ -1228,7 +1217,7 @@ int AdlibDriver::update_setVibratoDepth(uint8 *&dataptr, OutputState &state, uin
_unkOutputByte2 &= 0xBF;
// The Vibrato Depth bit is set or cleared, the others remain unchanged
- output0x388(0xBD00 | _unkOutputByte2);
+ writeOPL(0xBD, _unkOutputByte2);
return 0;
}
@@ -1251,16 +1240,16 @@ int AdlibDriver::updateCallback38(uint8 *&dataptr, OutputState &state, uint8 val
uint8 outValue = _outputTable[value];
// Feedback strength / Connection type
- output0x388((0xC0 + _curTable) << 8);
+ writeOPL(0xC0 + _curTable, 0x00);
// Key scaling level / Operator output level
- output0x388(((0x43 + outValue) << 8) | 0x3F);
+ writeOPL(0x43 + outValue, 0x3F);
// Sustain Level / Release Rate
- output0x388(((0x83 + outValue) << 8) | 0xFF);
+ writeOPL(0x83 + outValue, 0xFF);
// Key On / Octave / Frequency
- output0x388((0xB0 + _curTable) << 8);
+ writeOPL(0xB0 + _curTable, 0x00);
}
_curTable = tableBackUp;
@@ -1277,10 +1266,10 @@ int AdlibDriver::updateCallback39(uint8 *&dataptr, OutputState &state, uint8 val
unk2 |= ((state.unkOutputValue1 & 0x20) << 8);
// Frequency
- output0x388(((0xA0 + _curTable) << 8) | (unk2 & 0xFF));
+ writeOPL(0xA0 + _curTable, unk2 & 0xFF);
// Key On / Octave / Frequency
- output0x388(((0xB0 + _curTable) << 8) | ((unk2 & 0xFF00) >> 8));
+ writeOPL(0xB0 + _curTable, (unk2 & 0xFF00) >> 8);
return 0;
}
@@ -1329,10 +1318,10 @@ int AdlibDriver::updateCallback41(uint8 *&dataptr, OutputState &state, uint8 val
state.unk17 = unk1;
// Frequency
- output0x388(((0xA0 + _curTable) << 8) | unk1);
+ writeOPL(0xA0 + _curTable, unk1);
// Key On / Octave / Frequency
- output0x388(((0xB0 + _curTable) << 8) | state.unkOutputValue1);
+ writeOPL(0xB0 + _curTable, state.unkOutputValue1);
return 0;
}
@@ -1373,7 +1362,7 @@ int AdlibDriver::updateCallback46(uint8 *&dataptr, OutputState &state, uint8 val
_tablePtr2 = _unkTable2[entry];
if (value == 2) {
// Frequency
- output0x388(0xA000 | _tablePtr2[0]);
+ writeOPL(0xA0, _tablePtr2[0]);
}
return 0;
}
@@ -1421,16 +1410,16 @@ int AdlibDriver::updateCallback48(uint8 *&dataptr, OutputState &state, uint8 val
// Octave / F-Number / Key-On for channels 6, 7 and 8
_outputTables[6].unkOutputValue1 = *ptr++ & 0x2F;
- output0x388(0xB600 | _outputTables[6].unkOutputValue1);
- output0x388(0xA600 | *ptr++);
+ writeOPL(0xB6, _outputTables[6].unkOutputValue1);
+ writeOPL(0xA6, *ptr++);
_outputTables[7].unkOutputValue1 = *ptr++ & 0x2F;
- output0x388(0xB700 | _outputTables[7].unkOutputValue1);
- output0x388(0xA700 | *ptr++);
+ writeOPL(0xB7, _outputTables[7].unkOutputValue1);
+ writeOPL(0xA7, *ptr++);
_outputTables[8].unkOutputValue1 = *ptr++ & 0x2F;
- output0x388(0xB800 | _outputTables[8].unkOutputValue1);
- output0x388(0xA800 | *ptr++);
+ writeOPL(0xB8, _outputTables[8].unkOutputValue1);
+ writeOPL(0xA8, *ptr++);
_unk4 = 0x20;
@@ -1441,7 +1430,7 @@ int AdlibDriver::updateCallback48(uint8 *&dataptr, OutputState &state, uint8 val
int AdlibDriver::updateCallback49(uint8 *&dataptr, OutputState &state, uint8 value) {
// Amplitude Modulation Depth / Vibrato Depth / Rhythm
- output0x388(0xBD00 | (((value & 0x1F) ^ 0xFF) & _unk4) | 0x20);
+ writeOPL(0xBD, (((value & 0x1F) ^ 0xFF) & _unk4) | 0x20);
value |= _unk4;
_unk4 = value;
@@ -1449,11 +1438,15 @@ int AdlibDriver::updateCallback49(uint8 *&dataptr, OutputState &state, uint8 val
value |= _unkOutputByte2;
value |= 0x20;
- // Could maybe use output0x388() here as well, though perhaps that will
- // affect timing.
+ // FIXME: This could probably be replaced with writeOPL(0xBD, value),
+ // but to make it easier to compare the output to DOSbox, write
+ // directly to the data port and do the probably unnecessary
+ // delay loop.
OPLWrite(_adlib, 0x389, value);
- waitLoops(23);
+
+ for (int i = 0; i < 23; i++)
+ OPLRead(_adlib, 0x388);
return 0;
}
@@ -1463,7 +1456,7 @@ int AdlibDriver::updateCallback50(uint8 *&dataptr, OutputState &state, uint8 val
_unk4 = 0;
// Amplitude Modulation Depth / Vibrato Depth / Rhythm
- output0x388(0xBD00 | (value & _unkOutputByte2));
+ writeOPL(0xBD, value & _unkOutputByte2);
return 0;
}
@@ -1479,7 +1472,7 @@ int AdlibDriver::updateCallback51(uint8 *&dataptr, OutputState &state, uint8 val
val += _unkValue12;
// Channel 2: Level Key Scaling / Total Level
- output0x388(0x5100 | checkValue(val));
+ writeOPL(0x51, checkValue(val));
}
if (value & 2) {
@@ -1490,7 +1483,7 @@ int AdlibDriver::updateCallback51(uint8 *&dataptr, OutputState &state, uint8 val
val += _unkValue14;
// Channel 3: Level Key Scaling / Total Level
- output0x388(0x5500 | checkValue(val));
+ writeOPL(0x55, checkValue(val));
}
if (value & 4) {
@@ -1501,7 +1494,7 @@ int AdlibDriver::updateCallback51(uint8 *&dataptr, OutputState &state, uint8 val
val += _unkValue15;
// Channel 3: Level Key Scaling / Total Level
- output0x388(0x5200 | checkValue(val));
+ writeOPL(0x52, checkValue(val));
}
if (value & 8) {
@@ -1512,7 +1505,7 @@ int AdlibDriver::updateCallback51(uint8 *&dataptr, OutputState &state, uint8 val
val += _unkValue18;
// Channel 2: Level Key Scaling / Total Level
- output0x388(0x5400 | checkValue(val));
+ writeOPL(0x54, checkValue(val));
}
if (value & 16) {
@@ -1523,7 +1516,7 @@ int AdlibDriver::updateCallback51(uint8 *&dataptr, OutputState &state, uint8 val
val += _unkValue20;
// Channel 1: Level Key Scaling / Total Level
- output0x388(0x5300 | checkValue(val));
+ writeOPL(0x53, checkValue(val));
}
return 0;
@@ -1539,7 +1532,7 @@ int AdlibDriver::updateCallback52(uint8 *&dataptr, OutputState &state, uint8 val
val += _unkValue12;
// Channel 2: Level Key Scaling / Total Level
- output0x388(0x5100 | checkValue(val));
+ writeOPL(0x51, checkValue(val));
}
if (value & 2) {
@@ -1549,7 +1542,7 @@ int AdlibDriver::updateCallback52(uint8 *&dataptr, OutputState &state, uint8 val
val += _unkValue14;
// Channel 3: Level Key Scaling / Total Level
- output0x388(0x5500 | checkValue(val));
+ writeOPL(0x55, checkValue(val));
}
if (value & 4) {
@@ -1559,7 +1552,7 @@ int AdlibDriver::updateCallback52(uint8 *&dataptr, OutputState &state, uint8 val
val += _unkValue15;
// Channel 3: Level Key Scaling / Total Level
- output0x388(0x5200 | checkValue(val));
+ writeOPL(0x52, checkValue(val));
}
if (value & 8) {
@@ -1569,7 +1562,7 @@ int AdlibDriver::updateCallback52(uint8 *&dataptr, OutputState &state, uint8 val
val += _unkValue18;
// Channel 2: Level Key Scaling / Total Level
- output0x388(0x5400 | checkValue(val));
+ writeOPL(0x54, checkValue(val));
}
if (value & 16) {
@@ -1579,7 +1572,7 @@ int AdlibDriver::updateCallback52(uint8 *&dataptr, OutputState &state, uint8 val
val += _unkValue20;
// Channel 1: Level Key Scaling / Total Level
- output0x388(0x5300 | checkValue(val));
+ writeOPL(0x53, checkValue(val));
}
return 0;
@@ -1595,7 +1588,7 @@ int AdlibDriver::updateCallback53(uint8 *&dataptr, OutputState &state, uint8 val
val += _unkValue12;
// Channel 2: Level Key Scaling / Total Level
- output0x388(0x5100 | checkValue(val));
+ writeOPL(0x51, checkValue(val));
}
if (value & 2) {
@@ -1605,7 +1598,7 @@ int AdlibDriver::updateCallback53(uint8 *&dataptr, OutputState &state, uint8 val
val += _unkValue14;
// Channel 3: Level Key Scaling / Total Level
- output0x388(0x5500 | checkValue(val));
+ writeOPL(0x55, checkValue(val));
}
if (value & 4) {
@@ -1615,7 +1608,7 @@ int AdlibDriver::updateCallback53(uint8 *&dataptr, OutputState &state, uint8 val
val += _unkValue15;
// Channel 3: Level Key Scaling / Total Level
- output0x388(0x5200 | checkValue(val));
+ writeOPL(0x52, checkValue(val));
}
if (value & 8) {
@@ -1625,7 +1618,7 @@ int AdlibDriver::updateCallback53(uint8 *&dataptr, OutputState &state, uint8 val
val += _unkValue18;
// Channel 2: Level Key Scaling / Total Level
- output0x388(0x5400 | checkValue(val));
+ writeOPL(0x54, checkValue(val));
}
if (value & 16) {
@@ -1635,7 +1628,7 @@ int AdlibDriver::updateCallback53(uint8 *&dataptr, OutputState &state, uint8 val
val += _unkValue20;
// Channel 1: Level Key Scaling / Total Level
- output0x388(0x5300 | checkValue(val));
+ writeOPL(0x53, checkValue(val));
}
return 0;
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 07:45:02 +0000