diff options
-rw-r--r-- | engines/mohawk/sound.cpp | 288 | ||||
-rw-r--r-- | engines/mohawk/sound.h | 3 |
2 files changed, 146 insertions, 145 deletions
diff --git a/engines/mohawk/sound.cpp b/engines/mohawk/sound.cpp index 38cb0b3608..e52122dce0 100644 --- a/engines/mohawk/sound.cpp +++ b/engines/mohawk/sound.cpp @@ -37,6 +37,150 @@ namespace Mohawk { +Audio::RewindableAudioStream *makeMohawkWaveStream(Common::SeekableReadStream *stream, CueList *cueList) { + uint32 tag = 0; + ADPCMStatus adpcmStatus; + DataChunk dataChunk; + uint32 dataSize = 0; + + memset(&dataChunk, 0, sizeof(DataChunk)); + + if (stream->readUint32BE() != ID_MHWK) // MHWK tag again + error ("Could not find tag 'MHWK'"); + + stream->readUint32BE(); // Skip size + + if (stream->readUint32BE() != ID_WAVE) + error ("Could not find tag 'WAVE'"); + + while (!dataChunk.audioData) { + tag = stream->readUint32BE(); + + switch (tag) { + case ID_ADPC: + debug(2, "Found Tag ADPC"); + // ADPCM Sound Only + // + // This is useful for seeking in the stream, and is actually quite brilliant + // considering some of the other things Broderbund did with the engine. + // Only Riven and CSTime are known to use ADPCM audio and only CSTime + // actually requires this for seeking. On the other hand, it may be interesting + // to look at that one Riven sample that uses the cue points. + // + // Basically, the sample frame from the cue list is looked up here and then + // sets the starting sample and step index at the point specified. Quite + // an elegant/efficient system, really. + + adpcmStatus.size = stream->readUint32BE(); + adpcmStatus.itemCount = stream->readUint16BE(); + adpcmStatus.channels = stream->readUint16BE(); + adpcmStatus.statusItems = new ADPCMStatus::StatusItem[adpcmStatus.itemCount]; + + assert(adpcmStatus.channels <= 2); + + for (uint16 i = 0; i < adpcmStatus.itemCount; i++) { + adpcmStatus.statusItems[i].sampleFrame = stream->readUint32BE(); + + for (uint16 j = 0; j < adpcmStatus.channels; j++) { + adpcmStatus.statusItems[i].channelStatus[j].last = stream->readSint16BE(); + adpcmStatus.statusItems[i].channelStatus[j].stepIndex = stream->readUint16BE(); + } + } + + // TODO: Actually use this chunk. For now, just delete the status items... + delete[] adpcmStatus.statusItems; + break; + case ID_CUE: + debug(2, "Found Tag Cue#"); + // Cues are used for animation sync. There are a couple in Myst and + // Riven but are not used there at all. + + if (!cueList) { + uint32 size = stream->readUint32BE(); + stream->skip(size); + break; + } + + cueList->size = stream->readUint32BE(); + cueList->pointCount = stream->readUint16BE(); + + if (cueList->pointCount == 0) + debug(2, "Cue# chunk found with no points!"); + else + debug(2, "Cue# chunk found with %d point(s)!", cueList->pointCount); + + cueList->points.resize(cueList->pointCount); + for (uint16 i = 0; i < cueList->pointCount; i++) { + cueList->points[i].sampleFrame = stream->readUint32BE(); + + byte nameLength = stream->readByte(); + cueList->points[i].name.clear(); + for (byte j = 0; j < nameLength; j++) + cueList->points[i].name += stream->readByte(); + + // Realign to an even boundary + if (!(nameLength & 1)) + stream->readByte(); + + debug (3, "Cue# chunk point %d (frame %d): %s", i, cueList->points[i].sampleFrame, cueList->points[i].name.c_str()); + } + break; + case ID_DATA: + debug(2, "Found Tag DATA"); + // We subtract 20 from the actual chunk size, which is the total size + // of the chunk's header + dataSize = stream->readUint32BE() - 20; + dataChunk.sampleRate = stream->readUint16BE(); + dataChunk.sampleCount = stream->readUint32BE(); + dataChunk.bitsPerSample = stream->readByte(); + dataChunk.channels = stream->readByte(); + dataChunk.encoding = stream->readUint16BE(); + dataChunk.loopCount = stream->readUint16BE(); + dataChunk.loopStart = stream->readUint32BE(); + dataChunk.loopEnd = stream->readUint32BE(); + + // NOTE: We currently ignore all of the loop parameters here. Myst uses the + // loopCount variable but the loopStart and loopEnd are always 0 and the size of + // the sample. Myst ME doesn't use the Mohawk Sound format and just standard WAVE + // files and therefore does not contain any of this metadata and we have to specify + // whether or not to loop elsewhere. + + dataChunk.audioData = stream->readStream(dataSize); + break; + default: + error ("Unknown tag found in 'tWAV' chunk -- '%s'", tag2str(tag)); + } + } + + // makeMohawkWaveStream always takes control of the original stream + delete stream; + + // The sound in Myst uses raw unsigned 8-bit data + // The sound in the CD version of Riven is encoded in Intel DVI ADPCM + // The sound in the DVD version of Riven is encoded in MPEG-2 Layer II or Intel DVI ADPCM + if (dataChunk.encoding == kCodecRaw) { + byte flags = Audio::FLAG_UNSIGNED; + + if (dataChunk.channels == 2) + flags |= Audio::FLAG_STEREO; + + return Audio::makeRawStream(dataChunk.audioData, dataChunk.sampleRate, flags); + } else if (dataChunk.encoding == kCodecADPCM) { + uint32 blockAlign = dataChunk.channels * dataChunk.bitsPerSample / 8; + return Audio::makeADPCMStream(dataChunk.audioData, DisposeAfterUse::YES, dataSize, Audio::kADPCMDVI, dataChunk.sampleRate, dataChunk.channels, blockAlign); + } else if (dataChunk.encoding == kCodecMPEG2) { +#ifdef USE_MAD + return Audio::makeMP3Stream(dataChunk.audioData, DisposeAfterUse::YES); +#else + warning ("MAD library not included - unable to play MP2 audio"); +#endif + } else { + error ("Unknown Mohawk WAVE encoding %d", dataChunk.encoding); + } + + return nullptr; +} + Sound::Sound(MohawkEngine* vm) : _vm(vm) { _midiDriver = NULL; _midiParser = NULL; @@ -384,150 +528,6 @@ void Sound::resumeSLST() { _vm->_mixer->pauseHandle(*_currentSLSTSounds[i].handle, false); } -Audio::RewindableAudioStream *Sound::makeMohawkWaveStream(Common::SeekableReadStream *stream, CueList *cueList) { - uint32 tag = 0; - ADPCMStatus adpcmStatus; - DataChunk dataChunk; - uint32 dataSize = 0; - - memset(&dataChunk, 0, sizeof(DataChunk)); - - if (stream->readUint32BE() != ID_MHWK) // MHWK tag again - error ("Could not find tag 'MHWK'"); - - stream->readUint32BE(); // Skip size - - if (stream->readUint32BE() != ID_WAVE) - error ("Could not find tag 'WAVE'"); - - while (!dataChunk.audioData) { - tag = stream->readUint32BE(); - - switch (tag) { - case ID_ADPC: - debug(2, "Found Tag ADPC"); - // ADPCM Sound Only - // - // This is useful for seeking in the stream, and is actually quite brilliant - // considering some of the other things Broderbund did with the engine. - // Only Riven and CSTime are known to use ADPCM audio and only CSTime - // actually requires this for seeking. On the other hand, it may be interesting - // to look at that one Riven sample that uses the cue points. - // - // Basically, the sample frame from the cue list is looked up here and then - // sets the starting sample and step index at the point specified. Quite - // an elegant/efficient system, really. - - adpcmStatus.size = stream->readUint32BE(); - adpcmStatus.itemCount = stream->readUint16BE(); - adpcmStatus.channels = stream->readUint16BE(); - adpcmStatus.statusItems = new ADPCMStatus::StatusItem[adpcmStatus.itemCount]; - - assert(adpcmStatus.channels <= 2); - - for (uint16 i = 0; i < adpcmStatus.itemCount; i++) { - adpcmStatus.statusItems[i].sampleFrame = stream->readUint32BE(); - - for (uint16 j = 0; j < adpcmStatus.channels; j++) { - adpcmStatus.statusItems[i].channelStatus[j].last = stream->readSint16BE(); - adpcmStatus.statusItems[i].channelStatus[j].stepIndex = stream->readUint16BE(); - } - } - - // TODO: Actually use this chunk. For now, just delete the status items... - delete[] adpcmStatus.statusItems; - break; - case ID_CUE: - debug(2, "Found Tag Cue#"); - // Cues are used for animation sync. There are a couple in Myst and - // Riven but are not used there at all. - - if (!cueList) { - uint32 size = stream->readUint32BE(); - stream->skip(size); - break; - } - - cueList->size = stream->readUint32BE(); - cueList->pointCount = stream->readUint16BE(); - - if (cueList->pointCount == 0) - debug(2, "Cue# chunk found with no points!"); - else - debug(2, "Cue# chunk found with %d point(s)!", cueList->pointCount); - - cueList->points.resize(cueList->pointCount); - for (uint16 i = 0; i < cueList->pointCount; i++) { - cueList->points[i].sampleFrame = stream->readUint32BE(); - - byte nameLength = stream->readByte(); - cueList->points[i].name.clear(); - for (byte j = 0; j < nameLength; j++) - cueList->points[i].name += stream->readByte(); - - // Realign to an even boundary - if (!(nameLength & 1)) - stream->readByte(); - - debug (3, "Cue# chunk point %d (frame %d): %s", i, cueList->points[i].sampleFrame, cueList->points[i].name.c_str()); - } - break; - case ID_DATA: - debug(2, "Found Tag DATA"); - // We subtract 20 from the actual chunk size, which is the total size - // of the chunk's header - dataSize = stream->readUint32BE() - 20; - dataChunk.sampleRate = stream->readUint16BE(); - dataChunk.sampleCount = stream->readUint32BE(); - dataChunk.bitsPerSample = stream->readByte(); - dataChunk.channels = stream->readByte(); - dataChunk.encoding = stream->readUint16BE(); - dataChunk.loopCount = stream->readUint16BE(); - dataChunk.loopStart = stream->readUint32BE(); - dataChunk.loopEnd = stream->readUint32BE(); - - // NOTE: We currently ignore all of the loop parameters here. Myst uses the - // loopCount variable but the loopStart and loopEnd are always 0 and the size of - // the sample. Myst ME doesn't use the Mohawk Sound format and just standard WAVE - // files and therefore does not contain any of this metadata and we have to specify - // whether or not to loop elsewhere. - - dataChunk.audioData = stream->readStream(dataSize); - break; - default: - error ("Unknown tag found in 'tWAV' chunk -- '%s'", tag2str(tag)); - } - } - - // makeMohawkWaveStream always takes control of the original stream - delete stream; - - // The sound in Myst uses raw unsigned 8-bit data - // The sound in the CD version of Riven is encoded in Intel DVI ADPCM - // The sound in the DVD version of Riven is encoded in MPEG-2 Layer II or Intel DVI ADPCM - if (dataChunk.encoding == kCodecRaw) { - byte flags = Audio::FLAG_UNSIGNED; - - if (dataChunk.channels == 2) - flags |= Audio::FLAG_STEREO; - - return Audio::makeRawStream(dataChunk.audioData, dataChunk.sampleRate, flags); - } else if (dataChunk.encoding == kCodecADPCM) { - uint32 blockAlign = dataChunk.channels * dataChunk.bitsPerSample / 8; - return Audio::makeADPCMStream(dataChunk.audioData, DisposeAfterUse::YES, dataSize, Audio::kADPCMDVI, dataChunk.sampleRate, dataChunk.channels, blockAlign); - } else if (dataChunk.encoding == kCodecMPEG2) { -#ifdef USE_MAD - return Audio::makeMP3Stream(dataChunk.audioData, DisposeAfterUse::YES); -#else - warning ("MAD library not included - unable to play MP2 audio"); -#endif - } else { - error ("Unknown Mohawk WAVE encoding %d", dataChunk.encoding); - } - - return NULL; -} - Audio::RewindableAudioStream *Sound::makeLivingBooksWaveStream_v1(Common::SeekableReadStream *stream) { uint16 header = stream->readUint16BE(); uint16 rate = 0; diff --git a/engines/mohawk/sound.h b/engines/mohawk/sound.h index f09706e155..a02c0d1ccb 100644 --- a/engines/mohawk/sound.h +++ b/engines/mohawk/sound.h @@ -116,6 +116,8 @@ struct DataChunk { Common::SeekableReadStream *audioData; }; +Audio::RewindableAudioStream *makeMohawkWaveStream(Common::SeekableReadStream *stream, CueList *cueList = nullptr); + class MohawkEngine; class Sound { @@ -158,7 +160,6 @@ private: MidiParser *_midiParser; byte *_midiData; - static Audio::RewindableAudioStream *makeMohawkWaveStream(Common::SeekableReadStream *stream, CueList *cueList = NULL); static Audio::RewindableAudioStream *makeLivingBooksWaveStream_v1(Common::SeekableReadStream *stream); void initMidi(); |