diff options
Diffstat (limited to 'engines/xeen')
-rw-r--r-- | engines/xeen/sprites.cpp | 255 | ||||
-rw-r--r-- | engines/xeen/sprites.h | 16 |
2 files changed, 132 insertions, 139 deletions
diff --git a/engines/xeen/sprites.cpp b/engines/xeen/sprites.cpp index b596432992..8ae7e41b95 100644 --- a/engines/xeen/sprites.cpp +++ b/engines/xeen/sprites.cpp @@ -117,6 +117,17 @@ void SpriteResource::clear() { */ void SpriteResource::drawOffset(XSurface &dest, uint16 offset, const Common::Point &pt, const Common::Rect &bounds, int flags, int scale) { + static const uint SCALE_TABLE[] = { + 0xFFFF, 0xFFEF, 0xEFEF, 0xEFEE, 0xEEEE, 0xEEAE, 0xAEAE, 0xAEAA, + 0xAAAA, 0xAA8A, 0x8A8A, 0x8A88, 0x8888, 0x8880, 0x8080, 0x8000 + }; + static const int PATTERN_STEPS[] = { 0, 1, 1, 1, 2, 2, 3, 3, 0, -1, -1, -1, -2, -2, -3, -3 }; + + uint16 scaleMask = SCALE_TABLE[scale]; + uint16 scaleMaskX = scaleMask, scaleMaskY = scaleMask; + bool flipped = (flags & SPRFLAG_HORIZ_FLIPPED) != 0; + int xInc = flipped ? -1 : 1; + // Get cell header Common::MemoryReadStream f(_data, _filesize); f.seek(offset); @@ -125,62 +136,65 @@ void SpriteResource::drawOffset(XSurface &dest, uint16 offset, const Common::Poi int yOffset = f.readUint16LE(); int height = f.readUint16LE(); - // TODO: I don't currently know the algorithm the original used for scaling. - // This is a best fit estimate that every increment of the scale field - // reduces the size of a sprite by approximately 6.6% - int newScale = MAX(100.0 - 6.6 * scale, 0.0); - if (newScale == 0) - return; - setupScaling(newScale, xOffset + width, yOffset + height); - - Common::Point destPos = pt; - destPos.x += (xOffset + width - _scaledWidth) / 2; - - bool flipped = (flags & SPRFLAG_HORIZ_FLIPPED) != 0; - int xInc = flipped ? -1 : 1; - + // Figure out drawing x, y + Common::Point destPos; + destPos.x = pt.x + getScaledVal(xOffset, scaleMaskX); + destPos.x += (width - getScaledVal(width, scaleMaskX)) / 2; + + destPos.y = pt.y + getScaledVal(yOffset, scaleMaskY); + + // If the flags allow the dest surface to be resized, ensure dest surface is big enough if (flags & SPRFLAG_RESIZE) { if (dest.w < (xOffset + width) || dest.h < (yOffset + height)) dest.create(xOffset + width, yOffset + height); } - // The pattern steps used in the pattern command - const int patternSteps[] = { 0, 1, 1, 1, 2, 2, 3, 3, 0, -1, -1, -1, -2, -2, -3, -3 }; + + uint16 scaleMaskXCopy = scaleMaskX; + Common::Rect drawBounds; + drawBounds.left = SCREEN_WIDTH; + drawBounds.top = SCREEN_HEIGHT; + drawBounds.right = drawBounds.bottom = 0; // Main loop - int opr1, opr2; - int32 pos; - int yIndex = yOffset; - int yPos = destPos.y + getScaledValue(yOffset); - for (int yCtr = 0, byteCount = 0; yCtr < height; ++yCtr, ++yIndex, byteCount = 0) { + for (int yCtr = height; yCtr > 0; --yCtr) { // The number of bytes in this scan line int lineLength = f.readByte(); if (lineLength == 0) { // Skip the specified number of scan lines int numLines = f.readByte(); - for (int idx = 0; idx < numLines; ++idx, ++yIndex, ++yCtr) { - if (_lineDist[yIndex]) - ++yPos; - } - } else if (destPos.y < bounds.top || yPos >= bounds.bottom - || !_lineDist[yIndex]) { + destPos.y += getScaledVal(numLines, scaleMaskY); + yCtr -= numLines; + continue; + } + + // Roll the scale mask + uint bit = (scaleMaskY >> 15) & 1; + scaleMaskY = ((scaleMaskY & 0x7fff) << 1) + bit; + + if (!bit) { + // Not a line to be drawn due to scaling down + f.skip(lineLength); + } else if (destPos.y < bounds.top || destPos.y >= bounds.bottom) { // Skip over the bytes of the line f.skip(lineLength); + destPos.y++; } else { - const byte *lineStartP = (const byte *)dest.getBasePtr(bounds.left, yPos); - const byte *lineEndP = (const byte *)dest.getBasePtr(bounds.right, yPos); - - // Skip the transparent pixels at the beginning of the scan line - int xPos = f.readByte() + xOffset; ++byteCount; - int xAmt = getScaledValue(flipped ? xOffset + width - xPos : xPos); - int xIndex = 0; - - byte *destP = (byte *)dest.getBasePtr(destPos.x + xAmt, yPos); - ++yPos; - - while (byteCount < lineLength) { - // The next byte is an opcode that determines what - // operators are to follow and how to interpret them. + scaleMaskX = scaleMaskXCopy; + int xOffset = f.readByte(); + + // Initialize the array to hold the temporary data for the line. We do this to make it simpler + // to handle both deciding which pixels to draw in a scaled image, as well as when images + // have been horizontally flipped + int tempLine[SCREEN_WIDTH]; + Common::fill(&tempLine[0], &tempLine[SCREEN_WIDTH], -1); + int *lineP = flipped ? &tempLine[width - 1 - xOffset] : &tempLine[xOffset]; + + // Build up the line + int byteCount, opr1, opr2; + int32 pos; + for (byteCount = 1; byteCount < lineLength; ) { + // The next byte is an opcode that determines what operators are to follow and how to interpret them. int opcode = f.readByte(); ++byteCount; // Decode the opcode @@ -190,26 +204,18 @@ void SpriteResource::drawOffset(XSurface &dest, uint16 offset, const Common::Poi switch (cmd) { case 0: // The following len + 1 bytes are stored as indexes into the color table. case 1: // The following len + 33 bytes are stored as indexes into the color table. - for (int i = 0; i < opcode + 1; ++i, ++xPos) { + for (int i = 0; i < opcode + 1; ++i, ++byteCount) { byte b = f.readByte(); - ++byteCount; - - if (_lineDist[xIndex++]) { - if (destP >= lineStartP && destP < lineEndP) - *destP = b; - destP += xInc; - } + *lineP = b; + lineP += xInc; } break; case 2: // The following byte is an index into the color table, draw it len + 3 times. opr1 = f.readByte(); ++byteCount; - for (int i = 0; i < len + 3; ++i, ++xPos) { - if (_lineDist[xIndex++]) { - if (destP >= lineStartP && destP < lineEndP) - *destP = opr1; - destP += xInc; - } + for (int i = 0; i < len + 3; ++i) { + *lineP = opr1; + lineP += xInc; } break; @@ -218,13 +224,9 @@ void SpriteResource::drawOffset(XSurface &dest, uint16 offset, const Common::Poi pos = f.pos(); f.seek(-opr1, SEEK_CUR); - for (int i = 0; i < len + 4; ++i, ++xPos) { - byte b = f.readByte(); - if (_lineDist[xIndex++]) { - if (destP >= lineStartP && destP < lineEndP) - *destP = b; - destP += xInc; - } + for (int i = 0; i < len + 4; ++i) { + *lineP = f.readByte(); + lineP += xInc; } f.seek(pos, SEEK_SET); @@ -233,31 +235,16 @@ void SpriteResource::drawOffset(XSurface &dest, uint16 offset, const Common::Poi case 4: // The following two bytes are indexes into the color table, draw the pair len + 2 times. opr1 = f.readByte(); ++byteCount; opr2 = f.readByte(); ++byteCount; - for (int i = 0; i < len + 2; ++i, xPos += 2) { - if (destP < lineStartP || destP >= (lineEndP - 1)) { - if (_lineDist[xIndex++]) - destP += xInc; - if (_lineDist[xIndex++]) - destP += xInc; - } else { - if (_lineDist[xIndex++]) { - *destP = opr1; - destP += xInc; - } - if (_lineDist[xIndex++]) { - *destP = opr2; - destP += xInc; - } - } + for (int i = 0; i < len + 2; ++i) { + *lineP = opr1; + lineP += xInc; + *lineP = opr2; + lineP += xInc; } break; - case 5: // Skip len + 1 pixels filling them with the transparent color. - for (int idx = 0; idx < (len + 1); ++idx) { - if (_lineDist[xIndex++]) - destP += xInc; - ++xPos; - } + case 5: // Skip len + 1 pixels + lineP += len + 1; break; case 6: // Pattern command. @@ -267,30 +254,54 @@ void SpriteResource::drawOffset(XSurface &dest, uint16 offset, const Common::Poi cmd = (opcode >> 2) & 0x0E; opr1 = f.readByte(); ++byteCount; - for (int i = 0; i < len + 3; ++i, ++xPos) { - if (_lineDist[xIndex++]) { - if (destP >= lineStartP && destP < lineEndP) - *destP = opr1; - destP += xInc; - } - opr1 += patternSteps[cmd + (i % 2)]; + for (int i = 0; i < len + 3; ++i) { + *lineP = opr1; + lineP += xInc; + opr1 += PATTERN_STEPS[cmd + (i % 2)]; } break; + default: break; } } - assert(byteCount == lineLength); + + drawBounds.top = MIN(drawBounds.top, destPos.y); + drawBounds.bottom = MAX(drawBounds.bottom, destPos.y); + + // Handle drawing out the line + byte *destP = (byte *)dest.getBasePtr(destPos.x, destPos.y); + int16 xp = destPos.x; + lineP = &tempLine[0]; + + for (int xCtr = 0; xCtr < width; ++xCtr, ++lineP) { + bit = (scaleMaskX >> 15) & 1; + scaleMaskX = ((scaleMaskX & 0x7fff) << 1) + bit; + + if (bit) { + if (*lineP != -1 && xp >= bounds.left && xp < bounds.right) { + *destP = (byte)*lineP; + drawBounds.left = MIN(drawBounds.left, xp); + drawBounds.right = MAX(drawBounds.right, xp); + } + + ++destP; + ++xp; + } + } + + ++destPos.y; } } - - Common::Rect r(Common::Rect( - destPos.x + getScaledValue(xOffset), destPos.y + getScaledValue(yOffset), - destPos.x + getScaledValue(xOffset + width), destPos.y + getScaledValue(yOffset + height))); - r.clip(Common::Rect(0, 0, dest.w, dest.h)); - if (!r.isEmpty()) - dest.addDirtyRect(r); + dest.addDirtyRect(Common::Rect(0, 0, dest.w, dest.h)); + /* + if (drawBounds.isValidRect()) { + drawBounds.clip(Common::Rect(0, 0, dest.w, dest.h)); + if (!drawBounds.isEmpty()) + dest.addDirtyRect(drawBounds); + } + */ } void SpriteResource::draw(XSurface &dest, int frame, const Common::Point &destPos, @@ -303,9 +314,6 @@ void SpriteResource::draw(Window &dest, int frame, const Common::Point &destPos, draw(dest, frame, destPos, dest.getBounds(), flags, scale); } -/** - * Draw the sprite onto the given surface - */ void SpriteResource::draw(XSurface &dest, int frame, const Common::Point &destPos, const Common::Rect &bounds, int flags, int scale) { // TODO: TO test when I find sprites using scale values and flags @@ -318,47 +326,22 @@ void SpriteResource::draw(XSurface &dest, int frame, const Common::Point &destPo drawOffset(dest, _index[frame]._offset2, destPos, bounds, flags, scale); } -/** - * Draw the sprite onto the given surface - */ void SpriteResource::draw(XSurface &dest, int frame) { draw(dest, frame, Common::Point()); } -void SpriteResource::setupScaling(int scale, int frameWidth, int frameHeight) { - int highestDim = MAX(frameWidth, frameHeight); - int distCtr = 0; - int distIndex = 0; - _scaledWidth = _scaledHeight = 0; - - do { - distCtr += scale; - if (distCtr < 100) { - _lineDist[distIndex] = false; - } else { - _lineDist[distIndex] = true; - distCtr -= 100; - - if (distIndex < frameWidth) - ++_scaledWidth; - - if (distIndex < frameHeight) - ++_scaledHeight; - } - } while (++distIndex < highestDim); -} +uint SpriteResource::getScaledVal(int xy, uint16 &scaleMask) { + if (!xy) + return 0; -/** - * Returns a scaled value based on a passed in x or y distance - */ -int SpriteResource::getScaledValue(int xy) { - int newVal = 0; + uint result = 0; for (int idx = 0; idx < xy; ++idx) { - if (_lineDist[idx]) - ++newVal; + uint bit = (scaleMask >> 15) & 1; + scaleMask = ((scaleMask & 0x7fff) << 1) + bit; + result += bit; } - - return newVal; + + return result; } } // End of namespace Xeen diff --git a/engines/xeen/sprites.h b/engines/xeen/sprites.h index 0e3a3c3059..ce7b7861b2 100644 --- a/engines/xeen/sprites.h +++ b/engines/xeen/sprites.h @@ -50,15 +50,22 @@ private: void load(Common::SeekableReadStream &f); + /** + * Draw the sprite onto the given surface + */ void draw(XSurface &dest, int frame, const Common::Point &destPos, const Common::Rect &bounds, int flags = 0, int scale = 0); + /** + * Draw a sprite frame based on a passed offset into the data stream + */ void drawOffset(XSurface &dest, uint16 offset, const Common::Point &pt, const Common::Rect &bounds, int flags, int scale); - void setupScaling(int scale, int frameWidth, int frameHeight); - - int getScaledValue(int xy); + /** + * Scale a co-ordinate value based on the passed scaling mask + */ + static uint getScaledVal(int xy, uint16 &scaleMask); public: SpriteResource(); SpriteResource(const Common::String &filename); @@ -79,6 +86,9 @@ public: void draw(Window &dest, int frame, const Common::Point &destPos, int flags = 0, int scale = 0); + /** + * Draw the sprite onto the given surface + */ void draw(XSurface &dest, int frame); int size() const { return _index.size(); } |