1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
|
/*
* Copyright (C) 2002-2009 The DOSBox Team
* OPL2/OPL3 emulation library
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*/
/*
* Originally based on ADLIBEMU.C, an AdLib/OPL2 emulation library by Ken Silverman
* Copyright (C) 1998-2001 Ken Silverman
* Ken Silverman's official web site: "http://www.advsys.net/ken"
*/
#define fltype double
/*
define Bits, Bitu, Bit32s, Bit32u, Bit16s, Bit16u, Bit8s, Bit8u here
*/
#define Bitu uint
#define Bits int
#define Bit32u uint32
#define Bit32s int32
#define Bit16u uint16
#define Bit16s int16
#define Bit8u uint8
#define Bit8s int8
/*
define attribution that inlines/forces inlining of a function (optional)
*/
#define OPL_INLINE INLINE
#undef NUM_CHANNELS
#if defined(OPLTYPE_IS_OPL3)
#define NUM_CHANNELS 18
#else
#define NUM_CHANNELS 9
#endif
#define MAXOPERATORS (NUM_CHANNELS*2)
#define FL05 ((fltype)0.5)
#define FL2 ((fltype)2.0)
#ifdef PI
#undef PI
#endif
#define PI ((fltype)3.1415926535897932384626433832795)
#define FIXEDPT 0x10000 // fixed-point calculations using 16+16
#define FIXEDPT_LFO 0x1000000 // fixed-point calculations using 8+24
#define WAVEPREC 1024 // waveform precision (10 bits)
#define INTFREQU ((fltype)(14318180.0 / 288.0)) // clocking of the chip
#define OF_TYPE_ATT 0
#define OF_TYPE_DEC 1
#define OF_TYPE_REL 2
#define OF_TYPE_SUS 3
#define OF_TYPE_SUS_NOKEEP 4
#define OF_TYPE_OFF 5
#define ARC_CONTROL 0x00
#define ARC_TVS_KSR_MUL 0x20
#define ARC_KSL_OUTLEV 0x40
#define ARC_ATTR_DECR 0x60
#define ARC_SUSL_RELR 0x80
#define ARC_FREQ_NUM 0xa0
#define ARC_KON_BNUM 0xb0
#define ARC_PERC_MODE 0xbd
#define ARC_FEEDBACK 0xc0
#define ARC_WAVE_SEL 0xe0
#define ARC_SECONDSET 0x100 // second operator set for OPL3
#define OP_ACT_OFF 0x00
#define OP_ACT_NORMAL 0x01 // regular channel activated (bitmasked)
#define OP_ACT_PERC 0x02 // percussion channel activated (bitmasked)
#define BLOCKBUF_SIZE 512
// vibrato constants
#define VIBTAB_SIZE 8
#define VIBFAC 70/50000 // no braces, integer mul/div
// tremolo constants and table
#define TREMTAB_SIZE 53
#define TREM_FREQ ((fltype)(3.7)) // tremolo at 3.7hz
/* operator struct definition
For OPL2 all 9 channels consist of two operators each, carrier and modulator.
Channel x has operators x as modulator and operators (9+x) as carrier.
For OPL3 all 18 channels consist either of two operators (2op mode) or four
operators (4op mode) which is determined through register4 of the second
adlib register set.
Only the channels 0,1,2 (first set) and 9,10,11 (second set) can act as
4op channels. The two additional operators for a channel y come from the
2op channel y+3 so the operatorss y, (9+y), y+3, (9+y)+3 make up a 4op
channel.
*/
typedef struct operator_struct {
Bit32s cval, lastcval; // current output/last output (used for feedback)
Bit32u tcount, wfpos, tinc; // time (position in waveform) and time increment
fltype amp, step_amp; // and amplification (envelope)
fltype vol; // volume
fltype sustain_level; // sustain level
Bit32s mfbi; // feedback amount
fltype a0, a1, a2, a3; // attack rate function coefficients
fltype decaymul, releasemul; // decay/release rate functions
Bit32u op_state; // current state of operator (attack/decay/sustain/release/off)
Bit32u toff;
Bit32s freq_high; // highest three bits of the frequency, used for vibrato calculations
Bit16s* cur_wform; // start of selected waveform
Bit32u cur_wmask; // mask for selected waveform
Bit32u act_state; // activity state (regular, percussion)
bool sus_keep; // keep sustain level when decay finished
bool vibrato,tremolo; // vibrato/tremolo enable bits
// variables used to provide non-continuous envelopes
Bit32u generator_pos; // for non-standard sample rates we need to determine how many samples have passed
Bits cur_env_step; // current (standardized) sample position
Bits env_step_a,env_step_d,env_step_r; // number of std samples of one step (for attack/decay/release mode)
Bit8u step_skip_pos_a; // position of 8-cyclic step skipping (always 2^x to check against mask)
Bits env_step_skip_a; // bitmask that determines if a step is skipped (respective bit is zero then)
#if defined(OPLTYPE_IS_OPL3)
bool is_4op,is_4op_attached; // base of a 4op channel/part of a 4op channel
Bit32s left_pan,right_pan; // opl3 stereo panning amount
#endif
} op_type;
// per-chip variables
Bitu chip_num;
op_type op[MAXOPERATORS];
Bits int_samplerate;
Bit8u status;
Bit32u opl_index;
#if defined(OPLTYPE_IS_OPL3)
Bit8u adlibreg[512]; // adlib register set (including second set)
Bit8u wave_sel[44]; // waveform selection
#else
Bit8u adlibreg[256]; // adlib register set
Bit8u wave_sel[22]; // waveform selection
#endif
// vibrato/tremolo increment/counter
Bit32u vibtab_pos;
Bit32u vibtab_add;
Bit32u tremtab_pos;
Bit32u tremtab_add;
// enable an operator
void enable_operator(Bitu regbase, op_type* op_pt);
// functions to change parameters of an operator
void change_frequency(Bitu chanbase, Bitu regbase, op_type* op_pt);
void change_attackrate(Bitu regbase, op_type* op_pt);
void change_decayrate(Bitu regbase, op_type* op_pt);
void change_releaserate(Bitu regbase, op_type* op_pt);
void change_sustainlevel(Bitu regbase, op_type* op_pt);
void change_waveform(Bitu regbase, op_type* op_pt);
void change_keepsustain(Bitu regbase, op_type* op_pt);
void change_vibrato(Bitu regbase, op_type* op_pt);
void change_feedback(Bitu chanbase, op_type* op_pt);
// general functions
void adlib_init(Bit32u samplerate);
void adlib_write(Bitu idx, Bit8u val);
void adlib_getsample(Bit16s* sndptr, Bits numsamples);
Bitu adlib_reg_read(Bitu port);
void adlib_write_index(Bitu port, Bit8u val);
static Bit32u generator_add; // should be a chip parameter
|
