diff options
Diffstat (limited to 'sdk-modifications')
112 files changed, 0 insertions, 27302 deletions
diff --git a/sdk-modifications/include/archdefs.h b/sdk-modifications/include/archdefs.h deleted file mode 100755 index 37c61b8..0000000 --- a/sdk-modifications/include/archdefs.h +++ /dev/null @@ -1,2356 +0,0 @@ -/**************************************************************************
-* *
-* PROJECT : MIPS port for uC/OS-II *
-* *
-* MODULE : ARCHDEFS.h *
-* *
-* AUTHOR : Michael Anburaj *
-* URL : http://geocities.com/michaelanburaj/ *
-* EMAIL: michaelanburaj@hotmail.com *
-* *
-* PROCESSOR : MIPS 4Kc (32 bit RISC) - ATLAS board *
-* *
-* TOOL-CHAIN : SDE & Cygnus *
-* *
-* DESCRIPTION : *
-* Architecture definitions. *
-* *
-**************************************************************************/
-
-
-#ifndef __ARCHDEFS_H__
-#define __ARCHDEFS_H__
-
-
-/* ********************************************************************* */
-/* Module configuration */
-
-
-/* ********************************************************************* */
-/* Interface macro & data definition */
-
-/*
- * Utility defines for cross platform handling of 64bit constants.
- */
-
-#if !defined(Append)
- #define Append(c,s) (c##s)
-#endif
-
-#if !defined(__assembler) && !defined(MIPSAVPENV)
- #if defined(NT)
- #if !defined(UNS64Const)
- #define UNS64Const(c) Append(c,ui64)
- #endif
-
- #if !defined(INT64Const)
- #define INT64Const(c) Append(c,i64)
- #endif
- #else
- #if !defined(UNS64Const)
- #define UNS64Const(c) Append(c,ull)
- #endif
-
- #if !defined(INT64Const)
- #define INT64Const(c) Append(c,ll)
- #endif
- #endif
-#else /* Not C or C++ */
- #if !defined(UNS64Const)
- #define UNS64Const(c) c
- #endif
-
- #if !defined(INT64Const)
- #define INT64Const(c) c
- #endif
-#endif /* C or C++ */
-
-
-/*
- ************************************************************************
- * I N S T R U C T I O N F O R M A T S *
- ************************************************************************
- *
- * The following definitions describe each field in an instruction. There
- * is one diagram for each type of instruction, with field definitions
- * following the diagram for that instruction. Note that if a field of
- * the same name and position is defined in an earlier diagram, it is
- * not defined again in the subsequent diagram. Only new fields are
- * defined for each diagram.
- *
- * R-Type (operate)
- *
- * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | rs | rt | rd | sa | |
- * | Opcode | | | Tcode | func |
- * | | Bcode | | sel |
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define S_InstnOpcode 26
-#define M_InstnOpcode (0x3f << S_InstnOpcode)
-#define S_InstnRS 21
-#define M_InstnRS (0x1f << S_InstnRS)
-#define S_InstnRT 16
-#define M_InstnRT (0x1f << S_InstnRT)
-#define S_InstnRD 11
-#define M_InstnRD (0x1f << S_InstnRD)
-#define S_InstnSA 6
-#define M_InstnSA (0x1f << S_InstnSA)
-#define S_InstnTcode 6
-#define M_InstnTcode (0x3ff << S_InstnTcode)
-#define S_InstnBcode 6
-#define M_InstnBcode (0xfffff << S_InstnBcode)
-#define S_InstnFunc 0
-#define M_InstnFunc (0x3f << S_InstnFunc)
-#define S_InstnSel 0
-#define M_InstnSel (0x7 << S_InstnSel)
-
-/*
- * I-Type (load, store, branch, immediate)
- *
- * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | Opcode | rs | rt | Offset |
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define S_InstnOffset 0
-#define M_InstnOffset (0xffff << S_InstnOffset)
-
-/*
- * I-Type (pref)
- *
- * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | Opcode | rs | hint | Offset |
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define S_InstnHint S_InstnRT
-#define M_InstnHint M_InstnRT
-
-/*
- * J-Type (jump)
- *
- * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | Opcode | JIndex |
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define S_InstnJIndex 0
-#define M_InstnJIndex (0x03ffffff << S_InstnJIndex)
-
-/*
- * FP R-Type (operate)
- *
- * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | Opcode | fmt | ft | fs | fd | func |
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define S_InstnFmt S_InstnRS
-#define M_InstnFmt M_InstnRS
-#define S_InstnFT S_InstnRT
-#define M_InstnFT M_InstnRT
-#define S_InstnFS S_InstnRD
-#define M_InstnFS M_InstnRD
-#define S_InstnFD S_InstnSA
-#define M_InstnFD M_InstnSA
-
-/*
- * FP R-Type (cpu <-> cpu data movement))
- *
- * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | Opcode | sub | rt | fs | 0 |
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define S_InstnSub S_InstnRS
-#define M_InstnSub M_InstnRS
-
-/*
- * FP R-Type (compare)
- * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | | | | | |C| |
- * | Opcode | fmt | ft | fs | cc |0|A| func |
- * | | | | | | |B| |
- * | | | | | | |S| |
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define S_InstnCCcmp 8
-#define M_InstnCCcmp (0x7 << S_InstnCCcmp)
-#define S_InstnCABS 6
-#define M_InstnCABS (0x1 << S_InstnCABS)
-
-/*
- * FP R-Type (FPR conditional move on FP cc)
- *
- * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | Opcode | fmt | cc |n|t| fs | fd | func |
- * | | | |d|f| | | |
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define S_InstnCC 18
-#define M_InstnCC (0x7 << S_InstnCC)
-#define S_InstnND 17
-#define M_InstnND (0x1 << S_InstnND)
-#define S_InstnTF 16
-#define M_InstnTF (0x1 << S_InstnTF)
-
-/*
- * FP R-Type (3-operand operate)
- *
- * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | Opcode | fr | ft | fs | fd | op4 | fmt3|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define S_InstnFR S_InstnRS
-#define M_InstnFR M_InstnRS
-#define S_InstnOp4 3
-#define M_InstnOp4 (0x7 << S_InstnOp4)
-#define S_InstnFmt3 0
-#define M_InstnFmt3 (0x7 << S_InstnFmt3)
-
-/*
- * FP R-Type (Indexed load, store)
- *
- * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | Opcode | rs | rt | 0 | fd | func |
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-/*
- * FP R-Type (prefx)
- *
- * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | Opcode | rs | rt | hint | 0 | func |
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define S_InstnHintX S_InstnRD
-#define M_InstnHintX M_InstnRD
-
-/*
- * FP R-Type (GPR conditional move on FP cc)
- *
- * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | Opcode | rs | cc |n|t| rd | 0 | func |
- * | | | |d|f| | | |
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-/*
- * FP I-Type (load, store)
- *
- * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | Opcode | rs | ft | Offset |
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-/*
- * FP I-Type (branch)
- *
- * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | Opcode | fmt | cc |n|t| Offset |
- * | | | |d|f| |
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-
-/*
- *************************************************************************
- * V I R T U A L A D D R E S S D E F I N I T I O N S *
- *************************************************************************
- */
-
-#ifdef MIPSADDR64
-#define A_K0BASE UNS64Const(0xffffffff80000000)
-#define A_K1BASE UNS64Const(0xffffffffa0000000)
-#define A_K2BASE UNS64Const(0xffffffffc0000000)
-#define A_K3BASE UNS64Const(0xffffffffe0000000)
-#define A_REGION UNS64Const(0xc000000000000000)
-#define A_XKPHYS_ATTR UNS64Const(0x3800000000000000)
-#else
-#define A_K0BASE 0x80000000
-#define A_K1BASE 0xa0000000
-#define A_K2BASE 0xc0000000
-#define A_K3BASE 0xe0000000
-#endif
-#define M_KMAPPED 0x40000000 /* KnSEG address is mapped if bit is one */
-
-
-#ifdef MIPS_Model64
-
-#define S_VMAP64 62
-#define M_VMAP64 UNS64Const(0xc000000000000000)
-
-#define K_VMode11 3
-#define K_VMode10 2
-#define K_VMode01 1
-#define K_VMode00 0
-
-#define S_KSEG3 29
-#define M_KSEG3 (0x7 << S_KSEG3)
-#define K_KSEG3 7
-
-#define S_SSEG 29
-#define M_SSEG (0x7 << S_KSEG3)
-#define K_SSEG 6
-
-#define S_KSSEG 29
-#define M_KSSEG (0x7 << S_KSEG3)
-#define K_KSSEG 6
-
-#define S_KSEG1 29
-#define M_KSEG1 (0x7 << S_KSEG3)
-#define K_KSEG1 5
-
-#define S_KSEG0 29
-#define M_KSEG0 (0x7 << S_KSEG3)
-#define K_KSEG0 4
-
-#define S_XKSEG 29
-#define M_XKSEG (0x7 << S_KSEG3)
-#define K_XKSEG 3
-
-#define S_USEG 31
-#define M_USEG (0x1 << S_USEG)
-#define K_USEG 0
-
-#define S_EjtagProbeMem 20
-#define M_EjtagProbeMem (0x1 << S_EjtagProbeMem)
-#define K_EjtagProbeMem 0
-
-
-
-#else
-
-#define S_KSEG3 29
-#define M_KSEG3 (0x7 << S_KSEG3)
-#define K_KSEG3 7
-
-#define S_KSSEG 29
-#define M_KSSEG (0x7 << S_KSSEG)
-#define K_KSSEG 6
-
-#define S_SSEG 29
-#define M_SSEG (0x7 << S_SSEG)
-#define K_SSEG 6
-
-#define S_KSEG1 29
-#define M_KSEG1 (0x7 << S_KSEG1)
-#define K_KSEG1 5
-
-#define S_KSEG0 29
-#define M_KSEG0 (0x7 << S_KSEG0)
-#define K_KSEG0 4
-
-#define S_KUSEG 31
-#define M_KUSEG (0x1 << S_KUSEG)
-#define K_KUSEG 0
-
-#define S_SUSEG 31
-#define M_SUSEG (0x1 << S_SUSEG)
-#define K_SUSEG 0
-
-#define S_USEG 31
-#define M_USEG (0x1 << S_USEG)
-#define K_USEG 0
-
-#define K_EjtagLower 0xff200000
-#define K_EjtagUpper 0xff3fffff
-
-#define S_EjtagProbeMem 20
-#define M_EjtagProbeMem (0x1 << S_EjtagProbeMem)
-#define K_EjtagProbeMem 0
-
-#endif
-
-
-
-/*
- *************************************************************************
- * C A C H E I N S T R U C T I O N O P E R A T I O N C O D E S *
- *************************************************************************
- */
-
-/*
- * Cache encodings
- */
-#define K_CachePriI 0 /* Primary Icache */
-#define K_CachePriD 1 /* Primary Dcache */
-#define K_CachePriU 1 /* Unified primary */
-#define K_CacheTerU 2 /* Unified Tertiary */
-#define K_CacheSecU 3 /* Unified secondary */
-
-
-/*
- * Function encodings
- */
-#define S_CacheFunc 2 /* Amount to shift function encoding within 5-bit field */
-#define K_CacheIndexInv 0 /* Index invalidate */
-#define K_CacheIndexWBInv 0 /* Index writeback invalidate */
-#define K_CacheIndexLdTag 1 /* Index load tag */
-#define K_CacheIndexStTag 2 /* Index store tag */
-#define K_CacheHitInv 4 /* Hit Invalidate */
-#define K_CacheFill 5 /* Fill (Icache only) */
-#define K_CacheHitWBInv 5 /* Hit writeback invalidate */
-#define K_CacheHitWB 6 /* Hit writeback */
-#define K_CacheFetchLock 7 /* Fetch and lock */
-
-#define ICIndexInv ((K_CacheIndexInv << S_CacheFunc) | K_CachePriI)
-#define DCIndexWBInv ((K_CacheIndexWBInv << S_CacheFunc) | K_CachePriD)
-#define DCIndexInv DCIndexWBInv
-#define ICIndexLdTag ((K_CacheIndexLdTag << S_CacheFunc) | K_CachePriI)
-#define DCIndexLdTag ((K_CacheIndexLdTag << S_CacheFunc) | K_CachePriD)
-#define ICIndexStTag ((K_CacheIndexStTag << S_CacheFunc) | K_CachePriI)
-#define DCIndexStTag ((K_CacheIndexStTag << S_CacheFunc) | K_CachePriD)
-#define ICHitInv ((K_CacheHitInv << S_CacheFunc) | K_CachePriI)
-#define DCHitInv ((K_CacheHitInv << S_CacheFunc) | K_CachePriD)
-#define ICFill ((K_CacheFill << S_CacheFunc) | K_CachePriI)
-#define DCHitWBInv ((K_CacheHitWBInv << S_CacheFunc) | K_CachePriD)
-#define DCHitWB ((K_CacheHitWB << S_CacheFunc) | K_CachePriD)
-#define ICFetchLock ((K_CacheFetchLock << S_CacheFunc) | K_CachePriI)
-#define DCFetchLock ((K_CacheFetchLock << S_CacheFunc) | K_CachePriD)
-
-
-/*
- *************************************************************************
- * P R E F E T C H I N S T R U C T I O N H I N T S *
- *************************************************************************
- */
-
-#define PrefLoad 0
-#define PrefStore 1
-#define PrefLoadStreamed 4
-#define PrefStoreStreamed 5
-#define PrefLoadRetained 6
-#define PrefStoreRetained 7
-#define PrefWBInval 25
-#define PrefNudge 25
-
-
-/*
- *************************************************************************
- * C P U R E G I S T E R D E F I N I T I O N S *
- *************************************************************************
- */
-
-
-/*
- *************************************************************************
- * S O F T W A R E G P R N A M E S *
- *************************************************************************
- */
-
-#define zero $0
-#define AT $1
-#define v0 $2
-#define v1 $3
-#define a0 $4
-#define a1 $5
-#define a2 $6
-#define a3 $7
-#define t0 $8
-#define t1 $9
-#define t2 $10
-#define t3 $11
-#define t4 $12
-#define t5 $13
-#define t6 $14
-#define t7 $15
-#define s0 $16
-#define s1 $17
-#define s2 $18
-#define s3 $19
-#define s4 $20
-#define s5 $21
-#define s6 $22
-#define s7 $23
-#define t8 $24
-#define t9 $25
-#define k0 $26
-#define k1 $27
-#define gp $28
-#define sp $29
-#define fp $30
-#define ra $31
-
-/*
- * The following registers are used by the AVP environment and
- * are not part of the normal software definitions.
- */
-
-#ifdef MIPSAVPENV
-#define repc $25 /* Expected exception PC */
-#define tid $30 /* Current test case address */
-#endif
-
-
-/*
- *************************************************************************
- * H A R D W A R E G P R N A M E S *
- *************************************************************************
- *
- * In the AVP environment, several of the `r' names are removed from the
- * name space because they are used by the kernel for special purposes.
- * Removing them causes assembly rather than runtime errors for tests that
- * use the `r' names.
- *
- * - r25 (repc) is used as the expected PC on an exception
- * - r26-r27 (k0, k1) are used in the exception handler
- * - r30 (tid) is used as the current test address
- */
-
-#define r0 $0
-#define r1 $1
-#define r2 $2
-#define r3 $3
-#define r4 $4
-#define r5 $5
-#define r6 $6
-#define r7 $7
-#define r8 $8
-#define r9 $9
-#define r10 $10
-#define r11 $11
-#define r12 $12
-#define r13 $13
-#define r14 $14
-#define r15 $15
-#define r16 $16
-#define r17 $17
-#define r18 $18
-#define r19 $19
-#define r20 $20
-#define r21 $21
-#define r22 $22
-#define r23 $23
-#define r24 $24
-#ifdef MIPSAVPENV
-#define r25 r25_unknown
-#define r26 r26_unknown
-#define r27 r27_unknown
-#else
-#define r25 $25
-#define r26 $26
-#define r27 $27
-#endif
-#define r28 $28
-#define r29 $29
-#ifdef MIPSAVPENV
-#define r30 r30_unknown
-#else
-#define r30 $30
-#endif
-#define r31 $31
-
-
-/*
- *************************************************************************
- * H A R D W A R E G P R I N D I C E S *
- *************************************************************************
- *
- * These definitions provide the index (number) of the GPR, as opposed
- * to the assembler register name ($n).
- */
-
-#define R_r0 0
-#define R_r1 1
-#define R_r2 2
-#define R_r3 3
-#define R_r4 4
-#define R_r5 5
-#define R_r6 6
-#define R_r7 7
-#define R_r8 8
-#define R_r9 9
-#define R_r10 10
-#define R_r11 11
-#define R_r12 12
-#define R_r13 13
-#define R_r14 14
-#define R_r15 15
-#define R_r16 16
-#define R_r17 17
-#define R_r18 18
-#define R_r19 19
-#define R_r20 20
-#define R_r21 21
-#define R_r22 22
-#define R_r23 23
-#define R_r24 24
-#define R_r25 25
-#define R_r26 26
-#define R_r27 27
-#define R_r28 28
-#define R_r29 29
-#define R_r30 30
-#define R_r31 31
-#define R_hi 32 /* Hi register */
-#define R_lo 33 /* Lo register */
-
-
-/*
- *************************************************************************
- * S O F T W A R E G P R M A S K S *
- *************************************************************************
- *
- * These definitions provide the bit mask corresponding to the GPR number
- */
-
-#define M_AT (1<<1)
-#define M_v0 (1<<2)
-#define M_v1 (1<<3)
-#define M_a0 (1<<4)
-#define M_a1 (1<<5)
-#define M_a2 (1<<6)
-#define M_a3 (1<<7)
-#define M_t0 (1<<8)
-#define M_t1 (1<<9)
-#define M_t2 (1<<10)
-#define M_t3 (1<<11)
-#define M_t4 (1<<12)
-#define M_t5 (1<<13)
-#define M_t6 (1<<14)
-#define M_t7 (1<<15)
-#define M_s0 (1<<16)
-#define M_s1 (1<<17)
-#define M_s2 (1<<18)
-#define M_s3 (1<<19)
-#define M_s4 (1<<20)
-#define M_s5 (1<<21)
-#define M_s6 (1<<22)
-#define M_s7 (1<<23)
-#define M_t8 (1<<24)
-#define M_t9 (1<<25)
-#define M_k0 (1<<26)
-#define M_k1 (1<<27)
-#define M_gp (1<<28)
-#define M_sp (1<<29)
-#define M_fp (1<<30)
-#define M_ra (1<<31)
-
-
-/*
- *************************************************************************
- * C P 0 R E G I S T E R D E F I N I T I O N S *
- *************************************************************************
- * Each register has the following definitions:
- *
- * C0_rrr The register number (as a $n value)
- * R_C0_rrr The register index (as an integer corresponding
- * to the register number)
- *
- * Each field in a register has the following definitions:
- *
- * S_rrrfff The shift count required to right-justify
- * the field. This corresponds to the bit
- * number of the right-most bit in the field.
- * M_rrrfff The Mask required to isolate the field.
- *
- * Register diagrams included below as comments correspond to the
- * MIPS32 and MIPS64 architecture specifications. Refer to other
- * sources for register diagrams for older architectures.
- */
-
-
-/*
- ************************************************************************
- * I N D E X R E G I S T E R ( 0 ) *
- ************************************************************************
- *
- * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * |P| 0 | Index | Index
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define C0_Index $0
-#define R_C0_Index 0
-#define C0_INX C0_Index /* OBSOLETE - DO NOT USE IN NEW CODE */
-
-#define S_IndexP 31 /* Probe failure (R)*/
-#define M_IndexP (0x1 << S_IndexP)
-
-#define S_IndexIndex 0 /* TLB index (R/W)*/
-#define M_IndexIndex (0x3f << S_IndexIndex)
-
-#define M_Index0Fields 0x7fffffc0
-#define M_IndexRFields 0x80000000
-
-
-/*
- ************************************************************************
- * R A N D O M R E G I S T E R ( 1 ) *
- ************************************************************************
- *
- * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | 0 | Index | Random
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define C0_Random $1
-#define R_C0_Random 1
-#define C0_RAND $1 /* OBSOLETE - DO NOT USE IN NEW CODE */
-
-#define S_RandomIndex 0 /* TLB random index (R)*/
-#define M_RandomIndex (0x3f << S_RandomIndex)
-
-#define M_Random0Fields 0xffffffc0
-#define M_RandomRFields 0x0000003f
-
-
-/*
- ************************************************************************
- * E N T R Y L O 0 R E G I S T E R ( 2 ) *
- ************************************************************************
- *
- * 6 6 6 6 5 // 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 3 2 1 0 9 // 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+-+-+-+-+//+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | Fill (0) //| 0 | PFN | C |D|V|G| EntryLo0
- * +-+-+-+-+-+//+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define C0_EntryLo0 $2
-#define R_C0_EntryLo0 2
-#define C0_TLBLO_0 C0_EntryLo0 /* OBSOLETE - DO NOT USE IN NEW CODE */
-
-#define S_EntryLoPFN 6 /* PFN (R/W) */
-#define M_EntryLoPFN (0xffffff << S_EntryLoPFN)
-#define S_EntryLoC 3 /* Coherency attribute (R/W) */
-#define M_EntryLoC (0x7 << S_EntryLoC)
-#define S_EntryLoD 2 /* Dirty (R/W) */
-#define M_EntryLoD (0x1 << S_EntryLoD)
-#define S_EntryLoV 1 /* Valid (R/W) */
-#define M_EntryLoV (0x1 << S_EntryLoV)
-#define S_EntryLoG 0 /* Global (R/W) */
-#define M_EntryLoG (0x1 << S_EntryLoG)
-#define M_EntryLoOddPFN (0x1 << S_EntryLoPFN) /* Odd PFN bit */
-#define S_EntryLo_RS K_PageAlign /* Right-justify PFN */
-#define S_EntryLo_LS S_EntryLoPFN /* Position PFN to appropriate position */
-
-#define M_EntryLo0Fields 0x00000000
-#define M_EntryLoRFields 0xc0000000
-#define M_EntryLo0Fields64 UNS64Const(0x0000000000000000)
-#define M_EntryLoRFields64 UNS64Const(0xffffffffc0000000)
-
-/*
- * Cache attribute values in the C field of EntryLo and the
- * K0 field of Config
- */
-#define K_CacheAttrCWTnWA 0 /* Cacheable, write-thru, no write allocate */
-#define K_CacheAttrCWTWA 1 /* Cacheable, write-thru, write allocate */
-#define K_CacheAttrU 2 /* Uncached */
-#define K_CacheAttrC 3 /* Cacheable */
-#define K_CacheAttrCN 3 /* Cacheable, non-coherent */
-#define K_CacheAttrCCE 4 /* Cacheable, coherent, exclusive */
-#define K_CacheAttrCCS 5 /* Cacheable, coherent, shared */
-#define K_CacheAttrCCU 6 /* Cacheable, coherent, update */
-#define K_CacheAttrUA 7 /* Uncached accelerated */
-
-
-/*
- ************************************************************************
- * E N T R Y L O 1 R E G I S T E R ( 3 ) *
- ************************************************************************
- *
- * 6 6 6 6 5 // 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 3 2 1 0 9 // 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+-+-+-+-+//+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | Fill (0) //| 0 | PFN | C |D|V|G| EntryLo1
- * +-+-+-+-+-+//+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define C0_EntryLo1 $3
-#define R_C0_EntryLo1 3
-#define C0_TLBLO_1 C0_EntryLo1 /* OBSOLETE - DO NOT USE IN NEW CODE */
-
-/*
- * Field definitions are as given for EntryLo0 above
- */
-
-
-/*
- ************************************************************************
- * C O N T E X T R E G I S T E R ( 4 ) *
- ************************************************************************
- *
- * 6 // 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 3 // 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+//+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | // PTEBase | BadVPN<31:13> | 0 | Context
- * +-+//+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define C0_Context $4
-#define R_C0_Context 4
-#define C0_CTXT C0_Context /* OBSOLETE - DO NOT USE IN NEW CODE */
-
-#define S_ContextPTEBase 23 /* PTE base (R/W) */
-#define M_ContextPTEBase (0x1ff << S_ContextPTEBase)
-#define S_ContextBadVPN 4 /* BadVPN2 (R) */
-#define M_ContextBadVPN (0x7ffff << S_ContextBadVPN)
-#define S_ContextBadVPN_LS 9 /* Position BadVPN to bit 31 */
-#define S_ContextBadVPN_RS 13 /* Right-justify shifted BadVPN field */
-
-#define M_Context0Fields 0x0000000f
-#define M_ContextRFields 0x007ffff0
-#define M_Context0Fields64 UNS64Const(0x000000000000000f)
-#define M_ContextRFields64 UNS64Const(0x00000000007ffff0)
-
-
-/*
- ************************************************************************
- * P A G E M A S K R E G I S T E R ( 5 ) *
- ************************************************************************
- *
- * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | 0 | Mask | 0 | PageMask
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define C0_PageMask $5
-#define R_C0_PageMask 5 /* Mask (R/W) */
-#define C0_PGMASK C0_PageMask /* OBSOLETE - DO NOT USE IN NEW CODE */
-
-#define S_PageMaskMask 13
-#define M_PageMaskMask (0xfff << S_PageMaskMask)
-
-#define M_PageMask0Fields 0xfe001fff
-#define M_PageMaskRFields 0x00000000
-
-/*
- * Values in the Mask field
- */
-#define K_PageMask4K 0x000 /* K_PageMasknn values are values for use */
-#define K_PageMask16K 0x003 /* with KReqPageAttributes or KReqPageMask macros */
-#define K_PageMask64K 0x00f
-#define K_PageMask256K 0x03f
-#define K_PageMask1M 0x0ff
-#define K_PageMask4M 0x3ff
-#define K_PageMask16M 0xfff
-
-#define M_PageMask4K (K_PageMask4K << S_PageMaskMask) /* M_PageMasknn values are masks */
-#define M_PageMask16K (K_PageMask16K << S_PageMaskMask) /* in position in the PageMask register */
-#define M_PageMask64K (K_PageMask64K << S_PageMaskMask)
-#define M_PageMask256K (K_PageMask256K << S_PageMaskMask)
-#define M_PageMask1M (K_PageMask1M << S_PageMaskMask)
-#define M_PageMask4M (K_PageMask4M << S_PageMaskMask)
-#define M_PageMask16M (K_PageMask16M << S_PageMaskMask)
-
-
-/*
- ************************************************************************
- * W I R E D R E G I S T E R ( 6 ) *
- ************************************************************************
- *
- * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | 0 | Index | Wired
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define C0_Wired $6
-#define R_C0_Wired 6
-#define C0_TLBWIRED C0_Wired /* OBSOLETE - DO NOT USE IN NEW CODE */
-
-#define S_WiredIndex 0 /* TLB wired boundary (R/W) */
-#define M_WiredIndex (0x3f << S_WiredIndex)
-
-#define M_Wired0Fields 0xffffffc0
-#define M_WiredRFields 0x00000000
-
-
-/*
- ************************************************************************
- * B A D V A D D R R E G I S T E R ( 8 ) *
- ************************************************************************
- *
- * 6 // 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 3 // 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+//+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | // Bad Virtual Address | BadVAddr
- * +-+//+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define C0_BadVAddr $8
-#define R_C0_BadVAddr 8
-#define C0_BADVADDR C0_BadVAddr /* OBSOLETE - DO NOT USE IN NEW CODE */
-
-#define M_BadVAddrOddPage K_PageSize /* Even/Odd VA bit for pair of PAs */
-
-#define M_BadVAddr0Fields 0x00000000
-#define M_BadVAddrRFields 0xffffffff
-#define M_BadVAddr0Fields64 UNS64Const(0x0000000000000000)
-#define M_BadVAddrRFields64 UNS64Const(0xffffffffffffffff)
-
-/*
- ************************************************************************
- * C O U N T R E G I S T E R ( 9 ) *
- ************************************************************************
- *
- * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | Count Value | Count
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define C0_Count $9
-#define R_C0_Count 9
-#define C0_COUNT C0_Count /* OBSOLETE - DO NOT USE IN NEW CODE */
-
-#define M_Count0Fields 0x00000000
-#define M_CountRFields 0x00000000
-
-
-/*
- ************************************************************************
- * E N T R Y H I R E G I S T E R ( 1 0 ) *
- ************************************************************************
- *
- * 6 6 6 6 5 // 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 3 2 1 0 9 // 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+-+-+-+-+//+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | R | Fill // VPN2 | 0 | ASID | EntryHi
- * +-+-+-+-+-+//+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define C0_EntryHi $10
-#define R_C0_EntryHi 10
-#define C0_TLBHI C0_EntryHi /* OBSOLETE - DO NOT USE IN NEW CODE */
-
-#define S_EntryHiR64 62 /* Region (R/W) */
-#define M_EntryHiR64 UNS64Const(0xc000000000000000)
-#define S_EntryHiVPN2 13 /* VPN/2 (R/W) */
-#define M_EntryHiVPN2 (0x7ffff << S_EntryHiVPN2)
-#define M_EntryHiVPN264 UNS64Const(0x000000ffffffe000)
-#define S_EntryHiASID 0 /* ASID (R/W) */
-#define M_EntryHiASID (0xff << S_EntryHiASID)
-#define S_EntryHiVPN_Shf S_EntryHiVPN2
-
-#define M_EntryHi0Fields 0x00001f00
-#define M_EntryHiRFields 0x00000000
-#define M_EntryHi0Fields64 UNS64Const(0x0000000000001f00)
-#define M_EntryHiRFields64 UNS64Const(0x3fffff0000000000)
-
-
-/*
- ************************************************************************
- * C O M P A R E R E G I S T E R ( 1 1 ) *
- ************************************************************************
- *
- * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | Compare Value | Compare
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define C0_Compare $11
-#define R_C0_Compare 11
-#define C0_COMPARE C0_Compare /* OBSOLETE - DO NOT USE IN NEW CODE */
-
-#define M_Compare0Fields 0x00000000
-#define M_CompareRFields 0x00000000
-
-
-/*
- ************************************************************************
- * S T A T U S R E G I S T E R ( 1 2 ) *
- ************************************************************************
- *
- * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * |C|C|C|C|R|F|R|M|P|B|T|S|M| | R |I|I|I|I|I|I|I|I|K|S|U|U|R|E|E|I|
- * |U|U|U|U|P|R|E|X|X|E|S|R|M| | s |M|M|M|M|M|M|M|M|X|X|X|M|s|R|X|E| Status
- * |3|2|1|0| | | | | |V| | |I| | v |7|6|5|4|3|2|1|0| | | | |v|L|L| |
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define C0_Status $12
-#define R_C0_Status 12
-#define C0_SR C0_Status /* OBSOLETE - DO NOT USE IN NEW CODE */
-
-#define S_StatusCU 28 /* Coprocessor enable (R/W) */
-#define M_StatusCU (0xf << S_StatusCU)
-#define S_StatusCU3 31
-#define M_StatusCU3 (0x1 << S_StatusCU3)
-#define S_StatusCU2 30
-#define M_StatusCU2 (0x1 << S_StatusCU2)
-#define S_StatusCU1 29
-#define M_StatusCU1 (0x1 << S_StatusCU1)
-#define S_StatusCU0 28
-#define M_StatusCU0 (0x1 << S_StatusCU0)
-#define S_StatusRP 27 /* Enable reduced power mode (R/W) */
-#define M_StatusRP (0x1 << S_StatusRP)
-#define S_StatusFR 26 /* Enable 64-bit FPRs (MIPS64 only) (R/W) */
-#define M_StatusFR (0x1 << S_StatusFR)
-#define S_StatusRE 25 /* Enable reverse endian (R/W) */
-#define M_StatusRE (0x1 << S_StatusRE)
-#define S_StatusMX 24 /* Enable access to MDMX resources (MIPS64 only) (R/W) */
-#define M_StatusMX (0x1 << S_StatusMX)
-#define S_StatusPX 23 /* Enable access to 64-bit instructions/data (MIPS64 only) (R/W) */
-#define M_StatusPX (0x1 << S_StatusPX)
-#define S_StatusBEV 22 /* Enable Boot Exception Vectors (R/W) */
-#define M_StatusBEV (0x1 << S_StatusBEV)
-#define S_StatusTS 21 /* Denote TLB shutdown (R/W) */
-#define M_StatusTS (0x1 << S_StatusTS)
-#define S_StatusSR 20 /* Denote soft reset (R/W) */
-#define M_StatusSR (0x1 << S_StatusSR)
-#define S_StatusNMI 19
-#define M_StatusNMI (0x1 << S_StatusNMI) /* Denote NMI (R/W) */
-#define S_StatusIM 8 /* Interrupt mask (R/W) */
-#define M_StatusIM (0xff << S_StatusIM)
-#define S_StatusIM7 15
-#define M_StatusIM7 (0x1 << S_StatusIM7)
-#define S_StatusIM6 14
-#define M_StatusIM6 (0x1 << S_StatusIM6)
-#define S_StatusIM5 13
-#define M_StatusIM5 (0x1 << S_StatusIM5)
-#define S_StatusIM4 12
-#define M_StatusIM4 (0x1 << S_StatusIM4)
-#define S_StatusIM3 11
-#define M_StatusIM3 (0x1 << S_StatusIM3)
-#define S_StatusIM2 10
-#define M_StatusIM2 (0x1 << S_StatusIM2)
-#define S_StatusIM1 9
-#define M_StatusIM1 (0x1 << S_StatusIM1)
-#define S_StatusIM0 8
-#define M_StatusIM0 (0x1 << S_StatusIM0)
-#define S_StatusKX 7 /* Enable access to extended kernel addresses (MIPS64 only) (R/W) */
-#define M_StatusKX (0x1 << S_StatusKX)
-#define S_StatusSX 6 /* Enable access to extended supervisor addresses (MIPS64 only) (R/W) */
-#define M_StatusSX (0x1 << S_StatusSX)
-#define S_StatusUX 5 /* Enable access to extended user addresses (MIPS64 only) (R/W) */
-#define M_StatusUX (0x1 << S_StatusUX)
-#define S_StatusKSU 3 /* Two-bit current mode (R/W) */
-#define M_StatusKSU (0x3 << S_StatusKSU)
-#define S_StatusUM 4 /* User mode if supervisor mode not implemented (R/W) */
-#define M_StatusUM (0x1 << S_StatusUM)
-#define S_StatusSM 3 /* Supervisor mode (R/W) */
-#define M_StatusSM (0x1 << S_StatusSM)
-#define S_StatusERL 2 /* Denotes error level (R/W) */
-#define M_StatusERL (0x1 << S_StatusERL)
-#define S_StatusEXL 1 /* Denotes exception level (R/W) */
-#define M_StatusEXL (0x1 << S_StatusEXL)
-#define S_StatusIE 0 /* Enables interrupts (R/W) */
-#define M_StatusIE (0x1 << S_StatusIE)
-
-#define M_Status0Fields 0x00040000
-#define M_StatusRFields 0x058000e0 /* FR, MX, PX, KX, SX, UX unused in MIPS32 */
-#define M_Status0Fields64 0x00040000
-#define M_StatusRFields64 0x00000000
-
-/*
- * Values in the KSU field
- */
-#define K_StatusKSU_U 2 /* User mode in KSU field */
-#define K_StatusKSU_S 1 /* Supervisor mode in KSU field */
-#define K_StatusKSU_K 0 /* Kernel mode in KSU field */
-
-
-/*
- ************************************************************************
- * C A U S E R E G I S T E R ( 1 3 ) *
- ************************************************************************
- *
- * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * |B| | C | |I|W| |I|I|I|I|I|I|I|I| | | R |
- * |D| | E | Rsvd |V|P| Rsvd |P|P|P|P|P|P|P|P| | ExcCode | s | Cause
- * | | | | | | | |7|6|5|4|3|2|1|0| | | v |
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define C0_Cause $13
-#define R_C0_Cause 13
-#define C0_CAUSE C0_Cause /* OBSOLETE - DO NOT USE IN NEW CODE */
-
-#define S_CauseBD 31
-#define M_CauseBD (0x1 << S_CauseBD)
-#define S_CauseCE 28
-#define M_CauseCE (0x3<< S_CauseCE)
-#define S_CauseIV 23
-#define M_CauseIV (0x1 << S_CauseIV)
-#define S_CauseWP 22
-#define M_CauseWP (0x1 << S_CauseWP)
-#define S_CauseIP 8
-#define M_CauseIP (0xff << S_CauseIP)
-#define S_CauseIPEXT 10
-#define M_CauseIPEXT (0x3f << S_CauseIPEXT)
-#define S_CauseIP7 15
-#define M_CauseIP7 (0x1 << S_CauseIP7)
-#define S_CauseIP6 14
-#define M_CauseIP6 (0x1 << S_CauseIP6)
-#define S_CauseIP5 13
-#define M_CauseIP5 (0x1 << S_CauseIP5)
-#define S_CauseIP4 12
-#define M_CauseIP4 (0x1 << S_CauseIP4)
-#define S_CauseIP3 11
-#define M_CauseIP3 (0x1 << S_CauseIP3)
-#define S_CauseIP2 10
-#define M_CauseIP2 (0x1 << S_CauseIP2)
-#define S_CauseIP1 9
-#define M_CauseIP1 (0x1 << S_CauseIP1)
-#define S_CauseIP0 8
-#define M_CauseIP0 (0x1 << S_CauseIP0)
-#define S_CauseExcCode 2
-#define M_CauseExcCode (0x1f << S_CauseExcCode)
-
-#define M_Cause0Fields 0x4f3f0083
-#define M_CauseRFields 0xb000fc7c
-
-/*
- * Values in the CE field
- */
-#define K_CauseCE0 0 /* Coprocessor 0 in the CE field */
-#define K_CauseCE1 1 /* Coprocessor 1 in the CE field */
-#define K_CauseCE2 2 /* Coprocessor 2 in the CE field */
-#define K_CauseCE3 3 /* Coprocessor 3 in the CE field */
-
-/*
- * Values in the ExcCode field
- */
-#define EX_INT 0 /* Interrupt */
-#define EXC_INT (EX_INT << S_CauseExcCode)
-#define EX_MOD 1 /* TLB modified */
-#define EXC_MOD (EX_MOD << S_CauseExcCode)
-#define EX_TLBL 2 /* TLB exception (load or ifetch) */
-#define EXC_TLBL (EX_TLBL << S_CauseExcCode)
-#define EX_TLBS 3 /* TLB exception (store) */
-#define EXC_TLBS (EX_TLBS << S_CauseExcCode)
-#define EX_ADEL 4 /* Address error (load or ifetch) */
-#define EXC_ADEL (EX_ADEL << S_CauseExcCode)
-#define EX_ADES 5 /* Address error (store) */
-#define EXC_ADES (EX_ADES << S_CauseExcCode)
-#define EX_IBE 6 /* Instruction Bus Error */
-#define EXC_IBE (EX_IBE << S_CauseExcCode)
-#define EX_DBE 7 /* Data Bus Error */
-#define EXC_DBE (EX_DBE << S_CauseExcCode)
-#define EX_SYS 8 /* Syscall */
-#define EXC_SYS (EX_SYS << S_CauseExcCode)
-#define EX_SYSCALL EX_SYS
-#define EXC_SYSCALL EXC_SYS
-#define EX_BP 9 /* Breakpoint */
-#define EXC_BP (EX_BP << S_CauseExcCode)
-#define EX_BREAK EX_BP
-#define EXC_BREAK EXC_BP
-#define EX_RI 10 /* Reserved instruction */
-#define EXC_RI (EX_RI << S_CauseExcCode)
-#define EX_CPU 11 /* CoProcessor Unusable */
-#define EXC_CPU (EX_CPU << S_CauseExcCode)
-#define EX_OV 12 /* OVerflow */
-#define EXC_OV (EX_OV << S_CauseExcCode)
-#define EX_TR 13 /* Trap instruction */
-#define EXC_TR (EX_TR << S_CauseExcCode)
-#define EX_TRAP EX_TR
-#define EXC_TRAP EXC_TR
-#define EX_FPE 15 /* floating point exception */
-#define EXC_FPE (EX_FPE << S_CauseExcCode)
-#define EX_C2E 18 /* COP2 exception */
-#define EXC_C2E (EX_C2E << S_CauseExcCode)
-#define EX_MDMX 22 /* MDMX exception */
-#define EXC_MDMX (EX_MDMX << S_CauseExcCode)
-#define EX_WATCH 23 /* Watch exception */
-#define EXC_WATCH (EX_WATCH << S_CauseExcCode)
-#define EX_MCHECK 24 /* Machine check exception */
-#define EXC_MCHECK (EX_MCHECK << S_CauseExcCode)
-#define EX_CacheErr 30 /* Cache error caused re-entry to Debug Mode */
-#define EXC_CacheErr (EX_CacheErr << S_CauseExcCode)
-
-
-/*
- ************************************************************************
- * E P C R E G I S T E R ( 1 4 ) *
- ************************************************************************
- *
- * 6 // 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 3 // 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+//+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | // Exception PC | EPC
- * +-+//+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define C0_EPC $14
-#define R_C0_EPC 14
-
-#define M_EPC0Fields 0x00000000
-#define M_EPCRFields 0x00000000
-#define M_EPC0Fields64 UNS64Const(0x0000000000000000)
-#define M_EPCRFields64 UNS64Const(0x0000000000000000)
-
-/*
- ************************************************************************
- * P R I D R E G I S T E R ( 1 5 ) *
- ************************************************************************
- *
- * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | Company Opts | Company ID | Procesor ID | Revision | PRId
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define C0_PRId $15
-#define R_C0_PRId 15
-#define C0_PRID C0_PRID /* OBSOLETE - DO NOT USE IN NEW CODE */
-
-#define S_PRIdCoOpt 24 /* Company options (R) */
-#define M_PRIdCoOpt (0xff << S_PRIdCoOpt)
-#define S_PRIdCoID 16 /* Company ID (R) */
-#define M_PRIdCoID (0xff << S_PRIdCoID)
-#define S_PRIdImp 8 /* Implementation ID (R) */
-#define M_PRIdImp (0xff << S_PRIdImp)
-#define S_PRIdRev 0 /* Revision (R) */
-#define M_PRIdRev (0xff << S_PRIdRev)
-
-#define M_PRId0Fields 0x00000000
-#define M_PRIdRFields 0xffffffff
-/*
- * Values in the Company ID field
- */
-#define K_PRIdCoID_MIPS 1
-#define K_PRIdCoID_Broadcom 2
-#define K_PRIdCoID_Alchemy 3
-#define K_PRIdCoID_SiByte 4
-#define K_PRIdCoID_SandCraft 5
-#define K_PRIdCoID_Philips 6
-#define K_PRIdCoID_NextAvailable 7 /* Next available encoding */
-
-
-/*
- * Values in the implementation number field
- */
-#define K_PRIdImp_Jade 0x80
-#define K_PRIdImp_Opal 0x81
-#define K_PRIdImp_Ruby 0x82
-#define K_PRIdImp_JadeLite 0x83
-#define K_PRIdImp_4KEc 0x84 /* Emerald with TLB MMU */
-#define K_PRIdImp_4KEmp 0x85 /* Emerald with FM MMU */
-#define K_PRIdImp_4KSc 0x86 /* Coral */
-
-#define K_PRIdImp_R3000 0x01
-#define K_PRIdImp_R4000 0x04
-#define K_PRIdImp_R10000 0x09
-#define K_PRIdImp_R4300 0x0b
-#define K_PRIdImp_R5000 0x23
-#define K_PRIdImp_R5200 0x28
-#define K_PRIdImp_R5400 0x54
-
-/*
- ************************************************************************
- * C O N F I G R E G I S T E R ( 1 6 ) *
- ************************************************************************
- *
- * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * |M| |B| A | A | | K | Config
- * | | Reserved for Implementations|E| T | R | Reserved | 0 |
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define C0_Config $16
-#define R_C0_Config 16
-#define C0_CONFIG C0_Config /* OBSOLETE - DO NOT USE IN NEW CODE */
-
-#define S_ConfigMore 31 /* Additional config registers present (R) */
-#define M_ConfigMore (0x1 << S_ConfigMore)
-#define S_ConfigImpl 16 /* Implementation-specific fields */
-#define M_ConfigImpl (0x7fff << S_ConfigImpl)
-#define S_ConfigBE 15 /* Denotes big-endian operation (R) */
-#define M_ConfigBE (0x1 << S_ConfigBE)
-#define S_ConfigAT 13 /* Architecture type (R) */
-#define M_ConfigAT (0x3 << S_ConfigAT)
-#define S_ConfigAR 10 /* Architecture revision (R) */
-#define M_ConfigAR (0x7 << S_ConfigAR)
-#define S_ConfigMT 7 /* MMU Type (R) */
-#define M_ConfigMT (0x7 << S_ConfigMT)
-#define S_ConfigK0 0 /* Kseg0 coherency algorithm (R/W) */
-#define M_ConfigK0 (0x7 << S_ConfigK0)
-
-/*
- * The following definitions are technically part of the "reserved for
- * implementations" field, but are the semi-standard definition used in
- * fixed-mapping MMUs to control the cacheability of kuseg and kseg2/3
- * references. For that reason, they are included here, but may be
- * overridden by true implementation-specific definitions
- */
-#define S_ConfigK23 28 /* Kseg2/3 coherency algorithm (FM MMU only) (R/W) */
-#define M_ConfigK23 (0x7 << S_ConfigK23)
-#define S_ConfigKU 25 /* Kuseg coherency algorithm (FM MMU only) (R/W) */
-#define M_ConfigKU (0x7 << S_ConfigKU)
-
-#define M_Config0Fields 0x00000078
-#define M_ConfigRFields 0x8000ff80
-
-/*
- * Values in the AT field
- */
-#define K_ConfigAT_MIPS32 0 /* MIPS32 */
-#define K_ConfigAT_MIPS64S 1 /* MIPS64 with 32-bit addresses */
-#define K_ConfigAT_MIPS64 2 /* MIPS64 with 32/64-bit addresses */
-
-/*
- * Values in the MT field
- */
-#define K_ConfigMT_NoMMU 0 /* No MMU */
-#define K_ConfigMT_TLBMMU 1 /* Standard TLB MMU */
-#define K_ConfigMT_BATMMU 2 /* Standard BAT MMU */
-#define K_ConfigMT_FMMMU 3 /* Standard Fixed Mapping MMU */
-
-
-/*
- ************************************************************************
- * C O N F I G 1 R E G I S T E R ( 1 6, SELECT 1 ) *
- ************************************************************************
- *
- * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * |M| MMU Size | IS | IL | IA | DS | DL | DA |C|M|P|W|C|E|F| Config1
- * | | | | | | | | |2|D|C|R|A|P|P|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define C0_Config1 $16,1
-#define R_C0_Config1 16
-
-#define S_Config1More 31 /* Additional Config registers present (R) */
-#define M_Config1More (0x1 << S_Config1More)
-#define S_Config1MMUSize 25 /* Number of MMU entries - 1 (R) */
-#define M_Config1MMUSize (0x3f << S_Config1MMUSize)
-#define S_Config1IS 22 /* Icache sets per way (R) */
-#define M_Config1IS (0x7 << S_Config1IS)
-#define S_Config1IL 19 /* Icache line size (R) */
-#define M_Config1IL (0x7 << S_Config1IL)
-#define S_Config1IA 16 /* Icache associativity - 1 (R) */
-#define M_Config1IA (0x7 << S_Config1IA)
-#define S_Config1DS 13 /* Dcache sets per way (R) */
-#define M_Config1DS (0x7 << S_Config1DS)
-#define S_Config1DL 10 /* Dcache line size (R) */
-#define M_Config1DL (0x7 << S_Config1DL)
-#define S_Config1DA 7 /* Dcache associativity (R) */
-#define M_Config1DA (0x7 << S_Config1DA)
-#define S_Config1C2 6 /* Coprocessor 2 present (R) */
-#define M_Config1C2 (0x1 << S_Config1C2)
-#define S_Config1MD 5 /* Denotes MDMX present (R) */
-#define M_Config1MD (0x1 << S_Config1MD)
-#define S_Config1PC 4 /* Denotes performance counters present (R) */
-#define M_Config1PC (0x1 << S_Config1PC)
-#define S_Config1WR 3 /* Denotes watch registers present (R) */
-#define M_Config1WR (0x1 << S_Config1WR)
-#define S_Config1CA 2 /* Denotes MIPS-16 present (R) */
-#define M_Config1CA (0x1 << S_Config1CA)
-#define S_Config1EP 1 /* Denotes EJTAG present (R) */
-#define M_Config1EP (0x1 << S_Config1EP)
-#define S_Config1FP 0 /* Denotes floating point present (R) */
-#define M_Config1FP (0x1 << S_Config1FP)
-
-#define M_Config10Fields 0x00000060
-#define M_Config1RFields 0x7fffff9f
-
-/*
- * The following macro generates a table that is indexed
- * by the Icache or Dcache sets field in Config1 and
- * contains the decoded value of sets per way
- */
-#define Config1CacheSets() \
- HALF(64); \
- HALF(128); \
- HALF(256); \
- HALF(512); \
- HALF(1024); \
- HALF(2048); \
- HALF(4096); \
- HALF(8192);
-
-/*
- * The following macro generates a table that is indexed
- * by the Icache or Dcache line size field in Config1 and
- * contains the decoded value of the cache line size, in bytes
- */
-#define Config1CacheLineSize() \
- HALF(0); \
- HALF(4); \
- HALF(8); \
- HALF(16); \
- HALF(32); \
- HALF(64); \
- HALF(128); \
- HALF(256);
-
-
-/*
- ************************************************************************
- * C O N F I G 2 R E G I S T E R ( 1 6, SELECT 2 ) *
- ************************************************************************
- *
- * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * |M| | | | | | | | | | | | |S|T| Config1
- * | | | | | | | | | | | | | |M|L|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define C0_Config2 $16,2
-#define R_C0_Config2 16
-
-#define S_Config2More 31 /* Additional Config registers present (R) */
-#define M_Config2More (0x1 << S_Config2More)
-#define S_Config2SM 1 /* Denotes SmartMIPS ASE present (R) */
-#define M_Config2SM (0x1 << S_Config2SM)
-#define S_Config2TL 0 /* Denotes Tracing Logic present (R) */
-#define M_Config2TL (0x1 << S_Config2TL)
-
-#define M_Config20Fields 0xfffffffc
-#define M_Config2RFields 0x00000003
-
-/*
- ************************************************************************
- * L L A D D R R E G I S T E R ( 1 7 ) *
- ************************************************************************
- *
- * 6 6 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+-+//+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | // LL Physical Address | LLAddr
- * +-+-+//+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define C0_LLAddr $17
-#define R_C0_LLAddr 17
-#define C0_LLADDR C0_LLAddr /* OBSOLETE - DO NOT USE IN NEW CODE */
-
-#define M_LLAddr0Fields 0x00000000
-#define M_LLAddrRFields 0x00000000
-#define M_LLAddr0Fields64 UNS64Const(0x0000000000000000)
-#define M_LLAddrRFields64 UNS64Const(0x0000000000000000)
-
-
-/*
- ************************************************************************
- * W A T C H L O R E G I S T E R ( 1 8 ) *
- ************************************************************************
- *
- * 6 // 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 3 // 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+//+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | // Watch Virtual Address |I|R|W| WatchLo
- * +-+//+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define C0_WatchLo $18
-#define R_C0_WatchLo 18
-#define C0_WATCHLO C0_WatchLo /* OBSOLETE - DO NOT USE IN NEW CODE */
-
-#define S_WatchLoVAddr 3 /* Watch virtual address (R/W) */
-#define M_WatchLoVAddr (0x1fffffff << S_WatchLoVAddr)
-#define S_WatchLoI 2 /* Enable Istream watch (R/W) */
-#define M_WatchLoI (0x1 << S_WatchLoI)
-#define S_WatchLoR 1 /* Enable data read watch (R/W) */
-#define M_WatchLoR (0x1 << S_WatchLoR)
-#define S_WatchLoW 0 /* Enable data write watch (R/W) */
-#define M_WatchLoW (0x1 << S_WatchLoW)
-
-#define M_WatchLo0Fields 0x00000000
-#define M_WatchLoRFields 0x00000000
-#define M_WatchLo0Fields64 UNS64Const(0x0000000000000000)
-#define M_WatchLoRFields64 UNS64Const(0x0000000000000000)
-
-#define M_WatchLoEnables (M_WatchLoI | M_WatchLoR | M_WatchLoW)
-
-
-/*
- ************************************************************************
- * W A T C H H I R E G I S T E R ( 1 9 ) *
- ************************************************************************
- *
- * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * |M|G| Rsvd | ASID | Rsvd | Mask | 0 | WatchHi
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define C0_WatchHi $19
-#define R_C0_WatchHi 19
-#define C0_WATCHHI C0_WatchHi /* OBSOLETE - DO NOT USE IN NEW CODE */
-
-#define S_WatchHiM 31 /* Denotes additional Watch registers present (R) */
-#define M_WatchHiM (0x1 << S_WatchHiM)
-#define S_WatchHiG 30 /* Enable ASID-independent Watch match (R/W) */
-#define M_WatchHiG (0x1 << S_WatchHiG)
-#define S_WatchHiASID 16 /* ASID value to match (R/W) */
-#define M_WatchHiASID (0xff << S_WatchHiASID)
-#define S_WatchHiMask 3 /* Address inhibit mask (R/W) */
-#define M_WatchHiMask (0x1ff << S_WatchHiMask)
-
-#define M_WatchHi0Fields 0x3f00f007
-#define M_WatchHiRFields 0x80000000
-
-
-/*
- ************************************************************************
- * X C O N T E X T R E G I S T E R ( 2 0 ) *
- ************************************************************************
- *
- * 6 // 3 3 3 3 3 3 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 3 // 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+//+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | // PTEBase | R | BadVPN2<39:13> | 0 | XContext
- * +-+//+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define C0_XContext $20
-#define R_C0_XContext 20
-#define C0_EXTCTXT C0_XContext /* OBSOLETE - DO NOT USE IN NEW CODE */
-
-#define S_XContextBadVPN2 4 /* BadVPN2 (R) */
-#define S_XContextBadVPN S_XContextBadVPN2
-
-#define M_XContext0Fields 0x0000000f
-
-
-/*
- ************************************************************************
- * D E B U G R E G I S T E R ( 2 3 ) *
- ************************************************************************
- *
- * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * |D|D|N|L|D|H|C|I|M|C|D|I|D|D| | |N|S| |D|D|D|D|D|D|
- * |B|M|o|S|o|a|o|B|C|a|B|E|D|D|EJTAG|DExcCode |o|S| |I|I|D|D|B|S|
- * |D| |D|N|z|l|u|u|h|c|u|X|B|B| ver | |S|t| |N|B|B|B|p|S|
- * | | |C|M|e|t|n|s|e|h|s|I|S|L| | |S| | 0 |T| |S|L| | | Debug
- * | | |R| | | |t|E|c|e|E| |I|I| | |t| | | | | | | | |
- * | | | | | | |D|P|k|E|P| |m|m| | | | | | | | | | | |
- * | | | | | | |M| |P|P| | |p|p| | | | | | | | | | | |
- * | | | | | | | | | | | | |r|r| | | | | | | | | | | |
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define C0_Debug $23 /* EJTAG */
-#define R_C0_Debug 23
-
-#define S_DebugDBD 31 /* Debug branch delay (R) */
-#define M_DebugDBD (0x1 << S_DebugDBD)
-#define S_DebugDM 30 /* Debug mode (R) */
-#define M_DebugDM (0x1 << S_DebugDM)
-#define S_DebugNoDCR 29 /* No debug control register present (R) */
-#define M_DebugNoDCR (0x1 << S_DebugNoDCR)
-#define S_DebugLSNM 28 /* Load/Store Normal Memory (R/W) */
-#define M_DebugLSNM (0x1 << S_DebugLSNM)
-#define S_DebugDoze 27 /* Doze (R) */
-#define M_DebugDoze (0x1 << S_DebugDoze)
-#define S_DebugHalt 26 /* Halt (R) */
-#define M_DebugHalt (0x1 << S_DebugHalt)
-#define S_DebugCountDM 25 /* Count register behavior in debug mode (R/W) */
-#define M_DebugCountDM (0x1 << S_DebugCountDM)
-#define S_DebugIBusEP 24 /* Imprecise Instn Bus Error Pending (R/W) */
-#define M_DebugIBusEP (0x1 << S_DebugIBusEP)
-#define S_DebugMCheckP 23 /* Imprecise Machine Check Pending (R/W) */
-#define M_DebugMCheckP (0x1 << S_DebugMCheckP)
-#define S_DebugCacheEP 22 /* Imprecise Cache Error Pending (R/W) */
-#define M_DebugCacheEP (0x1 << S_DebugCacheEP)
-#define S_DebugDBusEP 21 /* Imprecise Data Bus Error Pending (R/W) */
-#define M_DebugDBusEP (0x1 << S_DebugDBusEP)
-#define S_DebugIEXI 20 /* Imprecise Exception Inhibit (R/W) */
-#define M_DebugIEXI (0x1 << S_DebugIEXI)
-#define S_DebugDDBSImpr 19 /* Debug data break store imprecise (R) */
-#define M_DebugDDBSImpr (0x1 << S_DebugDDBSImpr)
-#define S_DebugDDBLImpr 18 /* Debug data break load imprecise (R) */
-#define M_DebugDDBLImpr (0x1 << S_DebugDDBLImpr)
-#define S_DebugEJTAGver 15 /* EJTAG version number (R) */
-#define M_DebugEJTAGver (0x7 << S_DebugEJTAGver)
-#define S_DebugDExcCode 10 /* Debug exception code (R) */
-#define M_DebugDExcCode (0x1f << S_DebugDExcCode)
-#define S_DebugNoSSt 9 /* No single step implemented (R) */
-#define M_DebugNoSSt (0x1 << S_DebugNoSSt)
-#define S_DebugSSt 8 /* Single step enable (R/W) */
-#define M_DebugSSt (0x1 << S_DebugSSt)
-#define S_DebugDINT 5 /* Debug interrupt (R) */
-#define M_DebugDINT (0x1 << S_DebugDINT)
-#define S_DebugDIB 4 /* Debug instruction break (R) */
-#define M_DebugDIB (0x1 << S_DebugDIB)
-#define S_DebugDDBS 3 /* Debug data break store (R) */
-#define M_DebugDDBS (0x1 << S_DebugDDBS)
-#define S_DebugDDBL 2 /* Debug data break load (R) */
-#define M_DebugDDBL (0x1 << S_DebugDDBL)
-#define S_DebugDBp 1 /* Debug breakpoint (R) */
-#define M_DebugDBp (0x1 << S_DebugDBp)
-#define S_DebugDSS 0 /* Debug single step (R) */
-#define M_DebugDSS (0x1 << S_DebugDSS)
-
-#define M_Debug0Fields 0x01f000c0
-#define M_DebugRFields 0xec0ffe3f
-
-
-/*
- ************************************************************************
- * D E P C R E G I S T E R ( 2 4 ) *
- ************************************************************************
- *
- * 6 // 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 3 // 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+//+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | // EJTAG Debug Exception PC | DEPC
- * +-+//+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-
-#define C0_DEPC $24
-#define R_C0_DEPC 24
-
-#define M_DEEPC0Fields 0x00000000
-#define M_DEEPCRFields 0x00000000
-#define M_DEEPC0Fields64 UNS64Const(0x0000000000000000)
-#define M_DEEPCRFields64 UNS64Const(0x0000000000000000)
-
-
-/*
- ************************************************************************
- * P E R F C N T R E G I S T E R ( 2 5 ) *
- ************************************************************************
- *
- * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | | |I| | | |E|
- * |M| 0 | Event |E|U|S|K|X| PerfCnt
- * | | | | | | | |L|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- *
- * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | Event Count | PerfCnt
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define C0_PerfCnt $25
-#define R_C0_PerfCnt 25
-#define C0_PRFCNT0 C0_PerfCnt /* OBSOLETE - DO NOT USE IN NEW CODE */
-#define C0_PRFCNT1 C0_PerfCnt /* OBSOLETE - DO NOT USE IN NEW CODE */
-
-#define S_PerfCntM 31 /* More performance counters exist (R) */
-#define M_PerfCntM (1 << S_PerfCntM)
-#define S_PerfCntEvent 5 /* Enabled event (R/W) */
-#define M_PerfCntEvent (0x3f << S_PerfCntEvent)
-#define S_PerfCntIE 4 /* Interrupt Enable (R/W) */
-#define M_PerfCntIE (1 << S_PerfCntIE)
-#define S_PerfCntU 3 /* Enable counting in User Mode (R/W) */
-#define M_PerfCntU (1 << S_PerfCntU)
-#define S_PerfCntS 2 /* Enable counting in Supervisor Mode (R/W) */
-#define M_PerfCntS (1 << S_PerfCntS)
-#define S_PerfCntK 1 /* Enable counting in Kernel Mode (R/W) */
-#define M_PerfCntK (1 << S_PerfCntK)
-#define S_PerfCntEXL 0 /* Enable counting while EXL==1 (R/W) */
-#define M_PerfCntEXL (1 << S_PerfCntEXL)
-
-#define M_PerfCnt0Fields 0x7ffff800
-#define M_PerfCntRFields 0x80000000
-
-
-/*
- ************************************************************************
- * E R R C T L R E G I S T E R ( 2 6 ) *
- ************************************************************************
- *
- * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | Error Control | ErrCtl
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define C0_ErrCtl $26
-#define R_C0_ErrCtl 26
-#define C0_ECC $26 /* OBSOLETE - DO NOT USE IN NEW CODE */
-#define R_C0_ECC 26 /* OBSOLETE - DO NOT USE IN NEW CODE */
-
-#define M_ErrCtl0Fields 0x00000000
-#define M_ErrCtlRFields 0x00000000
-
-
-/*
- ************************************************************************
- * C A C H E E R R R E G I S T E R ( 2 7 ) * CacheErr
- ************************************************************************
- *
- * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | Cache Error Control | CacheErr
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define C0_CacheErr $27
-#define R_C0_CacheErr 27
-#define C0_CACHE_ERR C0_CacheErr /* OBSOLETE - DO NOT USE IN NEW CODE */
-
-#define M_CacheErr0Fields 0x00000000
-#define M_CachErrRFields 0x00000000
-
-
-/*
- ************************************************************************
- * T A G L O R E G I S T E R ( 2 8 ) * TagLo
- ************************************************************************
- *
- * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | TagLo | TagLo
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define C0_TagLo $28
-#define R_C0_TagLo 28
-#define C0_TAGLO C0_TagLo /* OBSOLETE - DO NOT USE IN NEW CODE */
-
-/*
- * Some implementations use separate TagLo registers for the
- * instruction and data caches. In those cases, the following
- * definitions can be used in relevant code
- */
-
-#define C0_ITagLo $28,0
-#define C0_DTagLo $28,2
-
-#define M_TagLo0Fields 0x00000000
-#define M_TagLoRFields 0x00000000
-
-
-/*
- ************************************************************************
- * D A T A L O R E G I S T E R ( 2 8, SELECT 1 ) * DataLo
- ************************************************************************
- *
- * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | DataLo | DataLo
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define C0_DataLo $28,1
-#define R_C0_DataLo 28
-
-/*
- * Some implementations use separate DataLo registers for the
- * instruction and data caches. In those cases, the following
- * definitions can be used in relevant code
- */
-
-#define C0_IDataLo $28,1
-#define C0_DDataLo $28,3
-
-#define M_DataLo0Fields 0x00000000
-#define M_DataLoRFields 0xffffffff
-
-
-/*
- ************************************************************************
- * T A G H I R E G I S T E R ( 2 9 ) * TagHi
- ************************************************************************
- *
- * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | TagHi | TagHi
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define C0_TagHi $29
-#define R_C0_TagHi 29
-#define C0_TAGHI C0_TagHi /* OBSOLETE - DO NOT USE IN NEW CODE */
-
-/*
- * Some implementations use separate TagHi registers for the
- * instruction and data caches. In those cases, the following
- * definitions can be used in relevant code
- */
-
-#define C0_ITagHi $29,0
-#define C0_DTagHi $29,2
-
-#define M_TagHi0Fields 0x00000000
-#define M_TagHiRFields 0x00000000
-
-
-/*
- ************************************************************************
- * D A T A H I R E G I S T E R ( 2 9, SELECT 1 ) * DataHi
- ************************************************************************
- *
- * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | DataHi | DataHi
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define C0_DataHi $29,1
-#define R_C0_DataHi 29
-
-/*
- * Some implementations use separate DataHi registers for the
- * instruction and data caches. In those cases, the following
- * definitions can be used in relevant code
- */
-
-#define C0_IDataHi $29,1
-#define C0_DDataHi $29,3
-
-#define M_DataHi0Fields 0x00000000
-#define M_DataHiRFields 0xffffffff
-
-
-/*
- ************************************************************************
- * E R R O R E P C R E G I S T E R ( 3 0 ) *
- ************************************************************************
- *
- * 6 // 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 3 // 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+//+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | // Error PC | ErrorEPC
- * +-+//+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define C0_ErrorEPC $30
-#define R_C0_ErrorEPC 30
-#define C0_ERROR_EPC C0_ErrorEPC /* OBSOLETE - DO NOT USE IN NEW CODE */
-
-#define M_ErrorEPC0Fields 0x00000000
-#define M_ErrorEPCRFields 0x00000000
-#define M_ErrorEPC0Fields64 UNS64Const(0x0000000000000000)
-#define M_ErrorEPCRFields64 UNS64Const(0x0000000000000000)
-
-
-/*
- ************************************************************************
- * D E S A V E R E G I S T E R ( 3 1 ) *
- ************************************************************************
- *
- * 6 // 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 3 // 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+//+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | // EJTAG Register Save Value | DESAVE
- * +-+//+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define C0_DESAVE $31
-#define R_C0_DESAVE 31
-
-#define M_DESAVE0Fields 0x00000000
-#define M_DESAVERFields 0x00000000
-#define M_DESAVE0Fields64 UNS64Const(0x0000000000000000)
-#define M_DESAVERFields64 UNS64Const(0x0000000000000000)
-
-
-/*
- *************************************************************************
- * C P 1 R E G I S T E R D E F I N I T I O N S *
- *************************************************************************
- */
-
-
-/*
- *************************************************************************
- * H A R D W A R E F P R N A M E S *
- *************************************************************************
- */
-
-#define fp0 $f0
-#define fp1 $f1
-#define fp2 $f2
-#define fp3 $f3
-#define fp4 $f4
-#define fp5 $f5
-#define fp6 $f6
-#define fp7 $f7
-#define fp8 $f8
-#define fp9 $f9
-#define fp10 $f10
-#define fp11 $f11
-#define fp12 $f12
-#define fp13 $f13
-#define fp14 $f14
-#define fp15 $f15
-#define fp16 $f16
-#define fp17 $f17
-#define fp18 $f18
-#define fp19 $f19
-#define fp20 $f20
-#define fp21 $f21
-#define fp22 $f22
-#define fp23 $f23
-#define fp24 $f24
-#define fp25 $f25
-#define fp26 $f26
-#define fp27 $f27
-#define fp28 $f28
-#define fp29 $f29
-#define fp30 $f30
-#define fp31 $f31
-
-/*
- * The following definitions are used to convert an FPR name
- * into the corresponding even or odd name, respectively.
- * This is used in macro substitution in the AVPs.
- */
-
-#define fp1_even $f0
-#define fp3_even $f2
-#define fp5_even $f4
-#define fp7_even $f6
-#define fp9_even $f8
-#define fp11_even $f10
-#define fp13_even $f12
-#define fp15_even $f14
-#define fp17_even $f16
-#define fp19_even $f18
-#define fp21_even $f20
-#define fp23_even $f22
-#define fp25_even $f24
-#define fp27_even $f26
-#define fp29_even $f28
-#define fp31_even $f30
-
-#define fp0_odd $f1
-#define fp2_odd $f3
-#define fp4_odd $f5
-#define fp6_odd $f7
-#define fp8_odd $f9
-#define fp10_odd $f11
-#define fp12_odd $f13
-#define fp14_odd $f15
-#define fp16_odd $f17
-#define fp18_odd $f19
-#define fp20_odd $f21
-#define fp22_odd $f23
-#define fp24_odd $f25
-#define fp26_odd $f27
-#define fp28_odd $f29
-#define fp30_odd $f31
-
-
-/*
- *************************************************************************
- * H A R D W A R E F P R I N D I C E S *
- *************************************************************************
- *
- * These definitions provide the index (number) of the FPR, as opposed
- * to the assembler register name ($n).
- */
-
-#define R_fp0 0
-#define R_fp1 1
-#define R_fp2 2
-#define R_fp3 3
-#define R_fp4 4
-#define R_fp5 5
-#define R_fp6 6
-#define R_fp7 7
-#define R_fp8 8
-#define R_fp9 9
-#define R_fp10 10
-#define R_fp11 11
-#define R_fp12 12
-#define R_fp13 13
-#define R_fp14 14
-#define R_fp15 15
-#define R_fp16 16
-#define R_fp17 17
-#define R_fp18 18
-#define R_fp19 19
-#define R_fp20 20
-#define R_fp21 21
-#define R_fp22 22
-#define R_fp23 23
-#define R_fp24 24
-#define R_fp25 25
-#define R_fp26 26
-#define R_fp27 27
-#define R_fp28 28
-#define R_fp29 29
-#define R_fp30 30
-#define R_fp31 31
-
-
-/*
- *************************************************************************
- * H A R D W A R E F C R N A M E S *
- *************************************************************************
- */
-
-#define fc0 $0
-#define fc25 $25
-#define fc26 $26
-#define fc28 $28
-#define fc31 $31
-
-
-/*
- *************************************************************************
- * H A R D W A R E F C R I N D I C E S *
- *************************************************************************
- *
- * These definitions provide the index (number) of the FCR, as opposed
- * to the assembler register name ($n).
- */
-
-#define R_fc0 0
-#define R_fc25 25
-#define R_fc26 26
-#define R_fc28 28
-#define R_fc31 31
-
-
-/*
- *************************************************************************
- * H A R D W A R E F C C N A M E S *
- *************************************************************************
- */
-
-#define cc0 $fcc0
-#define cc1 $fcc1
-#define cc2 $fcc2
-#define cc3 $fcc3
-#define cc4 $fcc4
-#define cc5 $fcc5
-#define cc6 $fcc6
-#define cc7 $fcc7
-
-
-/*
- *************************************************************************
- * H A R D W A R E F C C I N D I C E S *
- *************************************************************************
- *
- * These definitions provide the index (number) of the CC, as opposed
- * to the assembler register name ($n).
- */
-
-#define R_cc0 0
-#define R_cc1 1
-#define R_cc2 2
-#define R_cc3 3
-#define R_cc4 4
-#define R_cc5 5
-#define R_cc6 6
-#define R_cc7 7
-
-
-/*
- ************************************************************************
- * I M P L E M E N T A T I O N R E G I S T E R *
- ************************************************************************
- *
- * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * |Reserved for Additional|3|P|D|S| Implementation| Revision | FIR
- * | Configuration Bits |D|S| | | | |
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define C1_FIR $0
-#define R_C1_FIR 0
-
-#define S_FIRConfigS 16
-#define M_FIRConfigS (0x1 << S_FIRConfigS)
-#define S_FIRConfigD 17
-#define M_FIRConfigD (0x1 << S_FIRConfigD)
-#define S_FIRConfigPS 18
-#define M_FIRConfigPS (0x1 << S_FIRConfigPS)
-#define S_FIRConfig3D 19
-#define M_FIRConfig3D (0x1 << S_FIRConfig3D)
-#define M_FIRConfigAll (M_FIRConfigS|M_FIRConfigD|M_FIRConfigPS|M_FIRConfig3D)
-
-#define S_FIRImp 8
-#define M_FIRImp (0xff << S_FIRImp)
-
-#define S_FIRRev 0
-#define M_FIRRev (0xff << S_FIRRev)
-
-#define M_FIR0Fields 0xfff00000
-#define M_FIRRFields 0x000fffff
-
-/*
- ************************************************************************
- * C O N D I T I O N C O D E S R E G I S T E R *
- ************************************************************************
- *
- * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | 0 | CC | FCCR
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define C1_FCCR $25
-#define R_C1_FCCR 25
-
-#define S_FCCRCC 0
-#define M_FCCRCC (0xff << S_FCCRCC)
-#define S_FCCRCC7 7
-#define M_FCCRCC7 (0x1 << S_FCCRCC7)
-#define S_FCCRCC6 6
-#define M_FCCRCC6 (0x1 << S_FCCRCC6)
-#define S_FCCRCC5 5
-#define M_FCCRCC5 (0x1 << S_FCCRCC5)
-#define S_FCCRCC4 4
-#define M_FCCRCC4 (0x1 << S_FCCRCC4)
-#define S_FCCRCC3 3
-#define M_FCCRCC3 (0x1 << S_FCCRCC3)
-#define S_FCCRCC2 2
-#define M_FCCRCC2 (0x1 << S_FCCRCC2)
-#define S_FCCRCC1 1
-#define M_FCCRCC1 (0x1 << S_FCCRCC1)
-#define S_FCCRCC0 0
-#define M_FCCRCC0 (0x1 << S_FCCRCC0)
-
-#define M_FCCR0Fields 0xffffff00
-#define M_FCCRRFields 0x000000ff
-
-
-/*
- ************************************************************************
- * E X C E P T I O N S R E G I S T E R *
- ************************************************************************
- *
- * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | 0 | Cause | 0 | Flags | 0 | FEXR
- * | |E|V|Z|O|U|I| |V|Z|O|U|I| |
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define C1_FEXR $26
-#define R_C1_FEXR 26
-
-#define S_FEXRExc 12
-#define M_FEXRExc (0x3f << S_FEXRExc)
-#define S_FEXRExcE 17
-#define M_FEXRExcE (0x1 << S_FEXRExcE)
-#define S_FEXRExcV 16
-#define M_FEXRExcV (0x1 << S_FEXRExcV)
-#define S_FEXRExcZ 15
-#define M_FEXRExcZ (0x1 << S_FEXRExcZ)
-#define S_FEXRExcO 14
-#define M_FEXRExcO (0x1 << S_FEXRExcO)
-#define S_FEXRExcU 13
-#define M_FEXRExcU (0x1 << S_FEXRExcU)
-#define S_FEXRExcI 12
-#define M_FEXRExcI (0x1 << S_FEXRExcI)
-
-#define S_FEXRFlg 2
-#define M_FEXRFlg (0x1f << S_FEXRFlg)
-#define S_FEXRFlgV 6
-#define M_FEXRFlgV (0x1 << S_FEXRFlgV)
-#define S_FEXRFlgZ 5
-#define M_FEXRFlgZ (0x1 << S_FEXRFlgZ)
-#define S_FEXRFlgO 4
-#define M_FEXRFlgO (0x1 << S_FEXRFlgO)
-#define S_FEXRFlgU 3
-#define M_FEXRFlgU (0x1 << S_FEXRFlgU)
-#define S_FEXRFlgI 2
-#define M_FEXRFlgI (0x1 << S_FEXRFlgI)
-
-#define M_FEXR0Fields 0xfffc0f83
-#define M_FEXRRFields 0x00000000
-
-
-/*
- ************************************************************************
- * E N A B L E S R E G I S T E R *
- ************************************************************************
- *
- * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | 0 | Enables | 0 |F|RM | FENR
- * | |V|Z|O|U|I| |S| |
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define C1_FENR $28
-#define R_C1_FENR 28
-
-#define S_FENREna 7
-#define M_FENREna (0x1f << S_FENREna)
-#define S_FENREnaV 11
-#define M_FENREnaV (0x1 << S_FENREnaV)
-#define S_FENREnaZ 10
-#define M_FENREnaZ (0x1 << S_FENREnaZ)
-#define S_FENREnaO 9
-#define M_FENREnaO (0x1 << S_FENREnaO)
-#define S_FENREnaU 8
-#define M_FENREnaU (0x1 << S_FENREnaU)
-#define S_FENREnaI 7
-#define M_FENREnaI (0x1 << S_FENREnaI)
-
-#define S_FENRFS 2
-#define M_FENRFS (0x1 << S_FENRFS)
-
-#define S_FENRRM 0
-#define M_FENRRM (0x3 << S_FENRRM)
-
-#define M_FENR0Fields 0xfffff078
-#define M_FENRRFields 0x00000000
-
-
-/*
- ************************************************************************
- * C O N T R O L / S T A T U S R E G I S T E R *
- ************************************************************************
- *
- * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | FCC |F|C|Imp| 0 | Cause | Enables | Flags | RM| FCSR
- * |7|6|5|4|3|2|1|S|C| | |E|V|Z|O|U|I|V|Z|O|U|I|V|Z|O|U|I| |
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#define C1_FCSR $31
-#define R_C1_FCSR 31
-
-#define S_FCSRFCC7_1 25 /* Floating point condition codes 7..1 (R/W) */
-#define M_FCSRFCC7_1 (0x7f << S_FCSRFCC7_1)
-#define S_FCSRCC7 31
-#define M_FCSRCC7 (0x1 << S_FCSRCC7)
-#define S_FCSRCC6 30
-#define M_FCSRCC6 (0x1 << S_FCSRCC6)
-#define S_FCSRCC5 29
-#define M_FCSRCC5 (0x1 << S_FCSRCC5)
-#define S_FCSRCC4 28
-#define M_FCSRCC4 (0x1 << S_FCSRCC4)
-#define S_FCSRCC3 27
-#define M_FCSRCC3 (0x1 << S_FCSRCC3)
-#define S_FCSRCC2 26
-#define M_FCSRCC2 (0x1 << S_FCSRCC2)
-#define S_FCSRCC1 25
-#define M_FCSRCC1 (0x1 << S_FCSRCC1)
-
-#define S_FCSRFS 24 /* Flush denorms to zero (R/W) */
-#define M_FCSRFS (0x1 << S_FCSRFS)
-
-#define S_FCSRCC0 23 /* Floating point condition code 0 (R/W) */
-#define M_FCSRCC0 (0x1 << S_FCSRCC0)
-#define S_FCSRCC S_FCSRCC0
-#define M_FCSRCC M_FCSRCC0
-
-#define S_FCSRImpl 21 /* Implementation-specific control bits (R/W) */
-#define M_FCSRImpl (0x3 << S_FCSRImpl)
-
-#define S_FCSRExc 12 /* Exception cause (R/W) */
-#define M_FCSRExc (0x3f << S_FCSRExc)
-#define S_FCSRExcE 17
-#define M_FCSRExcE (0x1 << S_FCSRExcE)
-#define S_FCSRExcV 16
-#define M_FCSRExcV (0x1 << S_FCSRExcV)
-#define S_FCSRExcZ 15
-#define M_FCSRExcZ (0x1 << S_FCSRExcZ)
-#define S_FCSRExcO 14
-#define M_FCSRExcO (0x1 << S_FCSRExcO)
-#define S_FCSRExcU 13
-#define M_FCSRExcU (0x1 << S_FCSRExcU)
-#define S_FCSRExcI 12
-#define M_FCSRExcI (0x1 << S_FCSRExcI)
-
-#define S_FCSREna 7 /* Exception enable (R/W) */
-#define M_FCSREna (0x1f << S_FCSREna)
-#define S_FCSREnaV 11
-#define M_FCSREnaV (0x1 << S_FCSREnaV)
-#define S_FCSREnaZ 10
-#define M_FCSREnaZ (0x1 << S_FCSREnaZ)
-#define S_FCSREnaO 9
-#define M_FCSREnaO (0x1 << S_FCSREnaO)
-#define S_FCSREnaU 8
-#define M_FCSREnaU (0x1 << S_FCSREnaU)
-#define S_FCSREnaI 7
-#define M_FCSREnaI (0x1 << S_FCSREnaI)
-
-#define S_FCSRFlg 2 /* Exception flags (R/W) */
-#define M_FCSRFlg (0x1f << S_FCSRFlg)
-#define S_FCSRFlgV 6
-#define M_FCSRFlgV (0x1 << S_FCSRFlgV)
-#define S_FCSRFlgZ 5
-#define M_FCSRFlgZ (0x1 << S_FCSRFlgZ)
-#define S_FCSRFlgO 4
-#define M_FCSRFlgO (0x1 << S_FCSRFlgO)
-#define S_FCSRFlgU 3
-#define M_FCSRFlgU (0x1 << S_FCSRFlgU)
-#define S_FCSRFlgI 2
-#define M_FCSRFlgI (0x1 << S_FCSRFlgI)
-
-#define S_FCSRRM 0 /* Rounding mode (R/W) */
-#define M_FCSRRM (0x3 << S_FCSRRM)
-
-#define M_FCSR0Fields 0x001c0000
-#define M_FCSRRFields 0x00000000
-
-/*
- * Values in the rounding mode field (of both FCSR and FCCR)
- */
-#define K_FCSRRM_RN 0
-#define K_FCSRRM_RZ 1
-#define K_FCSRRM_RP 2
-#define K_FCSRRM_RM 3
-
-
-/* ********************************************************************* */
-/* Interface function definition */
-
-
-/* ********************************************************************* */
-
-#endif /* __ARCHDEFS_H__ */
diff --git a/sdk-modifications/include/bit_ops.h b/sdk-modifications/include/bit_ops.h deleted file mode 100755 index f823db7..0000000 --- a/sdk-modifications/include/bit_ops.h +++ /dev/null @@ -1,58 +0,0 @@ -/* - bit_ops.h - Functions for dealing with conversion of data between types - - Copyright (c) 2006 Michael "Chishm" Chisholm - - Redistribution and use in source and binary forms, with or without modification, - are permitted provided that the following conditions are met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - 2. Redistributions in binary form must reproduce the above copyright notice, - this list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. - 3. The name of the author may not be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED - WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY - AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - - 2006-07-11 - Chishm - * Original release -*/ - -#ifndef _BIT_OPS_H -#define _BIT_OPS_H - -/*----------------------------------------------------------------- -Functions to deal with little endian values stored in u8 arrays ------------------------------------------------------------------*/ -static inline u16 u8array_to_u16 (const u8* item, int offset) { - return ( item[offset] | (item[offset + 1] << 8)); -} - -static inline u32 u8array_to_u32 (const u8* item, int offset) { - return ( item[offset] | (item[offset + 1] << 8) | (item[offset + 2] << 16) | (item[offset + 3] << 24)); -} - -static inline void u16_to_u8array (u8* item, int offset, u16 value) { - item[offset] = (u8)value; - item[offset + 1] = (u8)(value >> 8); -} - -static inline void u32_to_u8array (u8* item, int offset, u32 value) { - item[offset] = (u8)value; - item[offset + 1] = (u8)(value >> 8); - item[offset + 2] = (u8)(value >> 16); - item[offset + 3] = (u8)(value >> 24); -} - -#endif // _BIT_OPS_H diff --git a/sdk-modifications/include/console.h b/sdk-modifications/include/console.h deleted file mode 100755 index f6d74a4..0000000 --- a/sdk-modifications/include/console.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef __CONSOLE_H__
-#define __CONSOLE_H__
-#include "ds2io.h" -
-extern int ConsoleInit(unsigned short front_color, unsigned short background_color, enum SCREEN_ID screen, unsigned int buf_size);
-
-extern int cprintf(const char *format, ...);
-
-#endif //__CONSOLE_H__ diff --git a/sdk-modifications/include/directory.h b/sdk-modifications/include/directory.h deleted file mode 100755 index 00046a9..0000000 --- a/sdk-modifications/include/directory.h +++ /dev/null @@ -1,172 +0,0 @@ -/* - directory.h - Reading, writing and manipulation of the directory structure on - a FAT partition - - Copyright (c) 2006 Michael "Chishm" Chisholm - - Redistribution and use in source and binary forms, with or without modification, - are permitted provided that the following conditions are met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - 2. Redistributions in binary form must reproduce the above copyright notice, - this list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. - 3. The name of the author may not be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED - WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY - AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - - 2006-07-11 - Chishm - * Original release -*/ - -#ifndef _DIRECTORY_H -#define _DIRECTORY_H - -#include <sys/stat.h> - -#include "fs_common.h" -#include "partition.h" - -#define DIR_ENTRY_DATA_SIZE 0x20 -#define MAX_FILENAME_LENGTH 256 -#define MAX_ALIAS_LENGTH 13 -#define LFN_ENTRY_LENGTH 13 -#define FAT16_ROOT_DIR_CLUSTER 0 - -#define DIR_SEPARATOR '/' - -// File attributes -#define ATTRIB_ARCH 0x20 // Archive -#define ATTRIB_DIR 0x10 // Directory -#define ATTRIB_LFN 0x0F // Long file name -#define ATTRIB_VOL 0x08 // Volume -#define ATTRIB_SYS 0x04 // System -#define ATTRIB_HID 0x02 // Hidden -#define ATTRIB_RO 0x01 // Read only - -typedef enum {FT_DIRECTORY, FT_FILE} FILE_TYPE; - -typedef struct { - u32 cluster; - u32 sector; - s32 offset; -} DIR_ENTRY_POSITION; - -typedef struct { - u8 entryData[DIR_ENTRY_DATA_SIZE]; - DIR_ENTRY_POSITION dataStart; // Points to the start of the LFN entries of a file, or the alias for no LFN - DIR_ENTRY_POSITION dataEnd; // Always points to the file/directory's alias entry - char d_name[MAX_FILENAME_LENGTH + MAX_FILENAME_LENGTH*2]; //Store name string using UTF8 coding - //u16 unicodeFilename[MAX_FILENAME_LENGTH]; -} DIR_ENTRY; - -// Directory entry offsets -enum DIR_ENTRY_offset { - DIR_ENTRY_name = 0x00, - DIR_ENTRY_extension = 0x08, - DIR_ENTRY_attributes = 0x0B, - DIR_ENTRY_reserved = 0x0C, - DIR_ENTRY_cTime_ms = 0x0D, - DIR_ENTRY_cTime = 0x0E, - DIR_ENTRY_cDate = 0x10, - DIR_ENTRY_aDate = 0x12, - DIR_ENTRY_clusterHigh = 0x14, - DIR_ENTRY_mTime = 0x16, - DIR_ENTRY_mDate = 0x18, - DIR_ENTRY_cluster = 0x1A, - DIR_ENTRY_fileSize = 0x1C -}; - -/* -Returns true if the file specified by entry is a directory -*/ -static inline bool _FAT_directory_isDirectory (DIR_ENTRY* entry) { - return ((entry->entryData[DIR_ENTRY_attributes] & ATTRIB_DIR) != 0); -} - -static inline bool _FAT_directory_isWritable (DIR_ENTRY* entry) { - return ((entry->entryData[DIR_ENTRY_attributes] & ATTRIB_RO) == 0); -} - -static inline bool _FAT_directory_isDot (DIR_ENTRY* entry) { - return ((entry->d_name[0] == '.') && ((entry->d_name[1] == '\0') || - ((entry->d_name[1] == '.') && entry->d_name[2] == '\0'))); -} - -/* -Reads the first directory entry from the directory starting at dirCluster -Places result in entry -entry will be destroyed even if no directory entry is found -Returns true on success, false on failure -*/ -bool _FAT_directory_getFirstEntry (PARTITION* partition, DIR_ENTRY* entry, u32 dirCluster); - -/* -Reads the next directory entry after the one already pointed to by entry -Places result in entry -entry will be destroyed even if no directory entry is found -Returns true on success, false on failure -*/ -bool _FAT_directory_getNextEntry (PARTITION* partition, DIR_ENTRY* entry); - -/* -Gets the directory entry corrsponding to the supplied path -entry will be destroyed even if no directory entry is found -pathEnd specifies the end of the path string, for cutting strings short if needed - specify NULL to use the full length of path - pathEnd is only a suggestion, and the path string will be searched up until the next PATH_SEPARATOR - after pathEND. -Returns true on success, false on failure -*/ -bool _FAT_directory_entryFromPath (PARTITION* partition, DIR_ENTRY* entry, const char* path, const char* pathEnd); - -/* -Changes the current directory to the one specified by path -Returns true on success, false on failure -*/ -bool _FAT_directory_chdir (PARTITION* partition, const char* path); - -/* -Removes the directory entry specified by entry -Assumes that entry is valid -Returns true on success, false on failure -*/ -bool _FAT_directory_removeEntry (PARTITION* partition, DIR_ENTRY* entry); - -/* -Add a directory entry to the directory specified by dirCluster -The fileData, dataStart and dataEnd elements of the DIR_ENTRY struct are -updated with the new directory entry position and alias. -Returns true on success, false on failure -*/ -bool _FAT_directory_addEntry (PARTITION* partition, DIR_ENTRY* entry, u32 dirCluster); - -/* -Get the start cluster of a file from it's entry data -*/ -u32 _FAT_directory_entryGetCluster (const u8* entryData); - -/* -Fill in the file name and entry data of DIR_ENTRY* entry. -Assumes that the entry's dataStart and dataEnd are correct -Returns true on success, false on failure -*/ -bool _FAT_directory_entryFromPosition (PARTITION* partition, DIR_ENTRY* entry); - -/* -Fill in a stat struct based on a file entry -*/ -void _FAT_directory_entryStat (PARTITION* partition, DIR_ENTRY* entry, struct stat *st); - -#endif // _DIRECTORY_H diff --git a/sdk-modifications/include/ds2_cpu.h b/sdk-modifications/include/ds2_cpu.h deleted file mode 100755 index d4b7144..0000000 --- a/sdk-modifications/include/ds2_cpu.h +++ /dev/null @@ -1,57 +0,0 @@ -#ifndef __DS2_CPU_H__ -#define __DS2_CPU_H__ - -#ifdef __cplusplus -extern "C" { -#endif - -//exception handle - - -//cache operationr -//invalidate instruction cache -extern void __icache_invalidate_all(void); - -//invalidate data cache -extern void __dcache_invalidate_all(void); - -//data cache writeback -extern void __dcache_writeback_all(void); - -//data cache writeback and invalidate -extern void _dcache_wback_inv(unsigned long addr, unsigned long size); - - -//interruption operation -//clear CPU's interrupt state and enable global interrupt -extern void sti(void); - -//disable global interrupt -extern void cli(void); - -//disable global interrupt and store the global interrupt state -//return: interrupt state -extern unsigned int spin_lock_irqsave(void); - -//restore global interrupt state -extern void spin_unlock_irqrestore(unsigned int val); - - -//CPU frequence -//There are 14 levels, 0 to 13, 13 level have the highest clock frequence -extern int ds2_setCPUclocklevel(unsigned int num); - -//print colock frequence CPU -extern void printf_clock(void); - -//delay n us -extern void udelay(unsigned int usec); - -//delay n ms -extern void mdelay(unsigned int msec); - -#ifdef __cplusplus -} -#endif - -#endif //__DS2_CPU_H__ diff --git a/sdk-modifications/include/ds2_cpuclock.h b/sdk-modifications/include/ds2_cpuclock.h deleted file mode 100644 index 3263ed0..0000000 --- a/sdk-modifications/include/ds2_cpuclock.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef _DS2_CPUCLOCK_H__ -#define _DS2_CPUCLOCK_H__ - - -#define CPU_MAX_LEVEL_EX 18 - -#ifdef __cplusplus -extern "C" { -#endif - -extern int ds2_getCPUClock(void); -extern int ds2_setCPULevel(unsigned int level); -extern void ds2_udelay(unsigned int usec); -extern void ds2_mdelay(unsigned int msec); - - -#ifdef __cplusplus -} -#endif - -#endif //__DS2_CPUCLOCK_H__ diff --git a/sdk-modifications/include/ds2_dma.h b/sdk-modifications/include/ds2_dma.h deleted file mode 100644 index 9a306cf..0000000 --- a/sdk-modifications/include/ds2_dma.h +++ /dev/null @@ -1,142 +0,0 @@ -#ifndef _DS2_DMA_H__ -#define _DS2_DMA_H__ - -#ifdef __cplusplus -extern "C" { -#endif - - -#define MAX_DMA_NUM 6 /* max 6 channels */ - - -// DMA request source register -#define DMAC_DRSR_RS_BIT 0 -#define DMAC_DRSR_RS_AUTO (8 << DMAC_DRSR_RS_BIT) - - -// DMA channel command register -#define DMAC_DCMD_SAI (1 << 23) /* source address increment */ -#define DMAC_DCMD_DAI (1 << 22) /* dest address increment */ - -#define DMAC_DCMD_SWDH_BIT 14 /* source port width */ -#define DMAC_DCMD_SWDH_32 (0 << DMAC_DCMD_SWDH_BIT) -#define DMAC_DCMD_SWDH_8 (1 << DMAC_DCMD_SWDH_BIT) -#define DMAC_DCMD_SWDH_16 (2 << DMAC_DCMD_SWDH_BIT) - -#define DMAC_DCMD_DWDH_BIT 12 /* dest port width */ -#define DMAC_DCMD_DWDH_32 (0 << DMAC_DCMD_DWDH_BIT) -#define DMAC_DCMD_DWDH_8 (1 << DMAC_DCMD_DWDH_BIT) - #define DMAC_DCMD_DWDH_16 (2 << DMAC_DCMD_DWDH_BIT) - -#define DMAC_DCMD_DS_BIT 8 /* transfer data size of a data unit */ -#define DMAC_DCMD_DS_32BIT (0 << DMAC_DCMD_DS_BIT) -#define DMAC_DCMD_DS_8BIT (1 << DMAC_DCMD_DS_BIT) -#define DMAC_DCMD_DS_16BIT (2 << DMAC_DCMD_DS_BIT) -#define DMAC_DCMD_DS_16BYTE (3 << DMAC_DCMD_DS_BIT) -#define DMAC_DCMD_DS_32BYTE (4 << DMAC_DCMD_DS_BIT) - -#define DMAC_DCMD_TM (1 << 7) /* transfer mode: 0-single 1-block */ - - -//detect if channel has completed job -#define DMAC_DCCSR_TT (1 << 3) /* transfer terminated */ -#define DMAC_BASE 0xB3020000 -#define REG32(addr) *((volatile u32 *)(addr)) -#define DMAC_DCCSR(n) (DMAC_BASE + (0x10 + (n) * 0x20)) /* DMA control/status */ -#define REG_DMAC_DCCSR(n) REG32(DMAC_DCCSR((n))) - -#define ds2_DMA_isBusy(n) \ - !( REG_DMAC_DCCSR((n)) & DMAC_DCCSR_TT ) - - -/* -Copy modes - -*/ - -#define DMA_MODE32BYTE DMAC_DCMD_SWDH_32 | DMAC_DCMD_DWDH_32 | \ - DMAC_DCMD_DS_32BYTE | DMAC_DCMD_TM - -#define DMA_MODE16BYTE DMAC_DCMD_SWDH_16 | DMAC_DCMD_DWDH_16 | \ - DMAC_DCMD_DS_16BYTE | DMAC_DCMD_TM - -#define DMA_MODE32BIT DMAC_DCMD_SWDH_32 | DMAC_DCMD_DWDH_32 | \ - DMAC_DCMD_DS_32BIT - -#define DMA_MODE16BIT DMAC_DCMD_SWDH_16 | DMAC_DCMD_DWDH_16 | \ - DMAC_DCMD_DS_16BIT - -#define DMA_MODE8BIT DMAC_DCMD_SWDH_8 | DMAC_DCMD_DWDH_8 | \ - DMAC_DCMD_DS_8BIT | DMAC_DCMD_TM - -#define DMA_MODECOPY DMAC_DCMD_SAI - - - -extern int _dmaCopy(int ch, void *dest, void *src, unsigned int size, unsigned int flags); - -/* - * Copy 'size' bytes from src to dest, in blocks of 32 bytes. - * size is in bytes and must be a multiple of 32. - * Both src and dest must be aligned to 32 bytes. - * Returns 0 on failure, non-zero on success. - */ -#define ds2_DMAcopy_32Byte(ch, dest, src, size)\ - _dmaCopy(ch, dest, src, size, DMA_MODECOPY | DMA_MODE32BYTE) - -/* - * Copy 'size' bytes from src to dest, in blocks of 16 bytes. - * size is in bytes and must be a multiple of 16. - * Both src and dest must be aligned to 16 bytes. - * Returns 0 on failure, non-zero on success. - */ -#define ds2_DMAcopy_16Byte(ch, dest, src, size)\ - _dmaCopy(ch, dest, src, size, DMA_MODECOPY | DMA_MODE16BYTE); - -/* - * Copy 'size' bytes from src to dest, in blocks of 32 bits (4 bytes). - * size is in bytes and must be a multiple of 4. - * Both src and dest must be aligned to 32 bits (4 bytes). - * Returns 0 on failure, non-zero on success. - */ -#define ds2_DMAcopy_32Bit(ch, dest, src, size)\ - _dmaCopy(ch, dest, src, size, DMA_MODECOPY | DMA_MODE32BIT); - -/* - * Copy 'size' bytes from src to dest, in blocks of 16 bits (2 bytes). - * size is in bytes and must be a multiple of 2. - * Both src and dest must be aligned to 16 bits (2 bytes). - * Returns 0 on failure, non-zero on success. - */ -#define ds2_DMAcopy_16Bit(ch, dest, src, size)\ - _dmaCopy(ch, dest, src, size, DMA_MODECOPY | DMA_MODE16BIT) - -/* - * Copy 'size' individual bytes (8 bits at a time) from src to dest. - * Returns 0 on failure, non-zero on success. - */ -#define ds2_DMAcopy_8Bit(ch, dest, src, size)\ - _dmaCopy(ch, dest, src, size, DMA_MODECOPY | DMA_MODE8BIT) - - - -//Stop DMA transfer -extern void dma_stop(int ch); - -#define ds2_DMA_stop(ch)\ - dma_stop(ch) - -//Wait DMA transfer over -extern int dma_wait_finish(int ch); - -#define ds2_DMA_wait(ch)\ - dma_wait_finish(ch) - - - -#ifdef __cplusplus -} -#endif - -#endif //__DMA_H__ - diff --git a/sdk-modifications/include/ds2_excpt.h b/sdk-modifications/include/ds2_excpt.h deleted file mode 100755 index 08fe77e..0000000 --- a/sdk-modifications/include/ds2_excpt.h +++ /dev/null @@ -1,55 +0,0 @@ -#ifndef __DS2_EXCPT_H__ -#define __DS2_EXCPT_H__ - -#include <mipsregs.h> -extern unsigned int Process_RA; -extern unsigned int Process_SP; - -#define SAVE_PROCESS_REGISTER() \ - do{ unsigned int sr ; \ - sr = read_c0_status(); \ - write_c0_status((sr&(~1))); \ - __asm__ __volatile__( \ - "sw $31,0x00(%0)\n\t" \ - "sw $29,0x00(%1)\n\t" \ - : \ - : "r" (&Process_RA),"r" (&Process_SP)); \ - write_c0_status(sr); \ - }while(0) - -#define RESTORE_PROCESS_REGISTER() \ - __asm__ __volatile__( \ - "lw $31,0x00(%0)\n\t" \ - "lw $29,0x00(%1)\n\t" \ - : \ - : "r" (&Process_RA),"r" (&Process_SP)) - -inline static void excpt_exit(x) \ -{ - unsigned int sr; - sr = read_c0_status(); - write_c0_status(sr & (~1)); - __asm__ __volatile__("lw $2,0x00(%0)\n\t" :: "r" (&x)); - RESTORE_PROCESS_REGISTER(); - write_c0_status(sr); - __asm__ __volatile__( - "jr $31\n\t" - "nop\n\t" - ); -} - -typedef void (*PFun_Exception_Handler)(unsigned int); - -//Setup handle to process the exception -//except_index: exception number -//except_handle: handle to process the exception -//arg: argument to the handle -extern int Setup_except_handle(unsigned int except_index, PFun_Exception_Handler except_handle, unsigned int arg); - -//Add a write watched exception, if the CPU write the addr, a exception will -// generated, the watch exception's number is 23 -//addr: address to be watched -extern void add_watch_point(unsigned int addr); - -#endif //__DS2_EXCPT_H__ - diff --git a/sdk-modifications/include/ds2_fcntl.h b/sdk-modifications/include/ds2_fcntl.h deleted file mode 100755 index 2c69221..0000000 --- a/sdk-modifications/include/ds2_fcntl.h +++ /dev/null @@ -1,51 +0,0 @@ -#ifndef __libc_fcntl_h__
-#define __libc_fcntl_h__
-
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-
-#define O_RDONLY (1 << 0)
-#define O_WRONLY (2 << 0)
-#define O_RDWR (3 << 0)
-#define O_APPEND (1 << 2)
-#define O_CREAT (1 << 3)
-#define O_DSYNC (1 << 4)
-#define O_EXCL (1 << 5)
-#define O_NOCTTY (1 << 6)
-#define O_NONBLOCK (1 << 7)
-#define O_RSYNC (1 << 8)
-#define O_SYNC (1 << 9)
-#define O_TRUNC (1 << 10)
-#define O_CREATE O_CREAT
-
-#define O_ACCMODE 0x3
-
-#define F_CLOEXEC (1 << 11)
-
-#define F_DUPFD 1
-#define F_GETFD 2
-#define F_SETFD 3
-#define F_GETFL 4
-#define F_SETFL 5
-#define F_GETLK 6
-#define F_SETLK 7
-#define F_SETLKW 8
-#define F_GETOWN 9
-#define F_SETOWN 10
-#define _F_LAST F_SETOWN
-
-#define _F_FILE_DESC (F_CLOEXEC)
-#define _O_FILE_CREATE (O_CREAT | O_EXCL | O_NOCTTY | O_TRUNC)
-#define _O_FILE_STATUS (O_APPEND | O_DSYNC | O_NONBLOCK | O_RSYNC | O_SYNC)
-#define _O_UNSUPPORTED (0)
-
-extern int open(const char* path, int oflag, ...);
-extern int fcntl(int fildes, int cmd, ...);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
diff --git a/sdk-modifications/include/ds2_malloc.h b/sdk-modifications/include/ds2_malloc.h deleted file mode 100755 index 5f158f7..0000000 --- a/sdk-modifications/include/ds2_malloc.h +++ /dev/null @@ -1,32 +0,0 @@ -#ifndef __DS2_MALLOC_H__ -#define __DS2_MALLOC_H__ - -#ifdef __cplusplus -extern "C" { -#endif - -extern void heapInit(unsigned int start, unsigned int end); - -extern void* Drv_alloc(unsigned int nbytes); -extern void Drv_deAlloc(void* address); -extern void* Drv_realloc(void* address, unsigned int nbytes); -extern void* Drv_calloc(unsigned int nmem, unsigned int size); - -#ifdef __cplusplus -} -#endif - -#define malloc Drv_alloc -#define calloc Drv_calloc -#define realloc Drv_realloc -#define free Drv_deAlloc - -#ifdef __cplusplus -#include <stdio.h> -inline void* operator new ( size_t s ) { return malloc( s ); } -inline void* operator new[] ( size_t s ) { return malloc( s ); } -inline void operator delete ( void* p ) { free( p ); } -inline void operator delete[] ( void* p ) { free( p ); } -#endif - -#endif //__DS2_MALLOC_H__ diff --git a/sdk-modifications/include/ds2_mmc_api.h b/sdk-modifications/include/ds2_mmc_api.h deleted file mode 100755 index 28e75ef..0000000 --- a/sdk-modifications/include/ds2_mmc_api.h +++ /dev/null @@ -1,56 +0,0 @@ -#ifndef __MMC_API_H__
-#define __MMC_API_H__
-
-/* Error codes */
-enum mmc_result_t {
- MMC_NO_RESPONSE = -1,
- MMC_NO_ERROR = 0,
- MMC_ERROR_OUT_OF_RANGE,
- MMC_ERROR_ADDRESS,
- MMC_ERROR_BLOCK_LEN,
- MMC_ERROR_ERASE_SEQ,
- MMC_ERROR_ERASE_PARAM,
- MMC_ERROR_WP_VIOLATION,
- MMC_ERROR_CARD_IS_LOCKED,
- MMC_ERROR_LOCK_UNLOCK_FAILED,
- MMC_ERROR_COM_CRC,
- MMC_ERROR_ILLEGAL_COMMAND,
- MMC_ERROR_CARD_ECC_FAILED,
- MMC_ERROR_CC,
- MMC_ERROR_GENERAL,
- MMC_ERROR_UNDERRUN,
- MMC_ERROR_OVERRUN,
- MMC_ERROR_CID_CSD_OVERWRITE,
- MMC_ERROR_STATE_MISMATCH,
- MMC_ERROR_HEADER_MISMATCH,
- MMC_ERROR_TIMEOUT,
- MMC_ERROR_CRC,
- MMC_ERROR_DRIVER_FAILURE,
-};
-
- -/* Get card's sectors*/
- -extern unsigned int MMC_GetSize(void); -
-
-/* initialize MMC/SD card */
-extern int MMC_Initialize(void);
-
-/* read a single block from MMC/SD card */
-extern int MMC_ReadBlock(unsigned int blockaddr, unsigned char *recbuf);
-
-/* read multi blocks from MMC/SD card */
-extern int MMC_ReadMultiBlock(unsigned int blockaddr, unsigned int blocknum, unsigned char *recbuf);
-
-/* write a block to MMC/SD card */
-extern int MMC_WriteBlock(unsigned int blockaddr, unsigned char *recbuf);
-
-/* write multi blocks to MMC/SD card */
-extern int MMC_WriteMultiBlock(unsigned int blockaddr, unsigned int blocknum, unsigned char *recbuf);
-
-/* detect MMC/SD card */
-extern int MMC_DetectStatus(void);
-
-#endif /* __MMC_API_H__ */ - diff --git a/sdk-modifications/include/ds2_timer.h b/sdk-modifications/include/ds2_timer.h deleted file mode 100755 index 3e5c3bc..0000000 --- a/sdk-modifications/include/ds2_timer.h +++ /dev/null @@ -1,50 +0,0 @@ -#ifndef __DS2_TIMER_H__
-#define __DS2_TIMER_H__
- -#ifdef __cplusplus -extern "C" { -#endif -
-/* -* Function: register a timer interruptting periodly -* channel: timer id, from 0 to 1 -* period: interrupt period, unit is us, period < 2.5s -* handle: interrupt handle, if handle = NULL, the timer will not generate interrupt -* arg: argument to the interrupt handle -*/ -extern int initTimer(unsigned int channel, unsigned int period, void (*handle)(unsigned int), int arg); - -/* -* Function: set the timer run -*/ -extern void runTimer(unsigned int channel); - -/* -* Function: stop timer -*/ -extern void stopTimer(unsigned int channel); - -/* -* Function: reset timer -*/ -extern void resetTimer(unsigned int channel); - -/* -* Function: read value of timer -*/ -extern unsigned int readTimer(unsigned int channel); -
- -#define SYSTIME_UNIT 42667 -/* -* Function: get the elapsed time since DS2 started -* it's uint is 42.667us, it will overflow after 50.9 horus since DS2 started -*/ -extern unsigned int getSysTime(void); - -#ifdef __cplusplus -} -#endif -
-#endif //__DS2_TIMER_H__ - diff --git a/sdk-modifications/include/ds2_types.h b/sdk-modifications/include/ds2_types.h deleted file mode 100755 index ae66737..0000000 --- a/sdk-modifications/include/ds2_types.h +++ /dev/null @@ -1,37 +0,0 @@ -#ifndef __DS2_TYPES_H__ -#define __DS2_TYPES_H__ - -typedef unsigned char u8; -typedef char s8; - -typedef unsigned short u16; -typedef short s16; - -typedef unsigned int u32; -typedef int s32; - -typedef unsigned long long u64; -typedef long long s64; - -typedef volatile unsigned char vu8; -typedef volatile char vs8; - -typedef volatile unsigned short vu16; -typedef volatile short vs16; - -typedef volatile unsigned int vu32; -typedef volatile int vs32; - -typedef volatile unsigned long long vu64; -typedef volatile long long vs64; - -#ifndef NULL -#define NULL 0 -#endif - -#ifndef TRUE -#define TRUE 1 -#define FALSE 0 -#endif - -#endif //__DS2_TYPES_H__ diff --git a/sdk-modifications/include/ds2io.h b/sdk-modifications/include/ds2io.h deleted file mode 100755 index e715cef..0000000 --- a/sdk-modifications/include/ds2io.h +++ /dev/null @@ -1,285 +0,0 @@ -#ifndef __DS2IO_H__
-#define __DS2IO_H__
-
-#ifndef BIT
-#define BIT(a) (1<<a)
-#endif
-
-#define SCREEN_WIDTH 256
-#define SCREEN_HEIGHT 192
-
-#define AUDIO_BUFFER_COUNT 4 // in 1.2, that's 4, but in 0.13 it would be 16 [Neb]
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef struct touchPosition {
- signed short x;
- signed short y;
-} touchPosition;
-
-typedef struct T_INPUT
-{
- unsigned int keysHeld;
- unsigned int keysUp;
- unsigned int keysDown;
- unsigned int keysDownRepeat;
- touchPosition touchPt;
- touchPosition movedPt;
- int touchDown;
- int touchUp;
- int touchHeld;
- int touchMoved;
-}INPUT;
-
-typedef enum KEYPAD_BITS {
- KEY_A = BIT(0), //!< Keypad A button.
- KEY_B = BIT(1), //!< Keypad B button.
- KEY_SELECT = BIT(2), //!< Keypad SELECT button.
- KEY_START = BIT(3), //!< Keypad START button.
- KEY_RIGHT = BIT(4), //!< Keypad RIGHT button.
- KEY_LEFT = BIT(5), //!< Keypad LEFT button.
- KEY_UP = BIT(6), //!< Keypad UP button.
- KEY_DOWN = BIT(7), //!< Keypad DOWN button.
- KEY_R = BIT(8), //!< Right shoulder button.
- KEY_L = BIT(9), //!< Left shoulder button.
- KEY_X = BIT(10), //!< Keypad X button.
- KEY_Y = BIT(11), //!< Keypad Y button.
- KEY_TOUCH = BIT(12), //!< Touchscreen pendown.
- KEY_LID = BIT(13) //!< Lid state.
-} KEYPAD_BITS;
-
-struct rtc{
- volatile unsigned char year; //add 2000 to get 4 digit year
- volatile unsigned char month; //1 to 12
- volatile unsigned char day; //1 to (days in month)
-
- volatile unsigned char weekday; // day of week
- volatile unsigned char hours; //0 to 11 for AM, 52 to 63 for PM
- volatile unsigned char minutes; //0 to 59
- volatile unsigned char seconds; //0 to 59
-};
-
-struct key_buf
-{
- unsigned short key;
- unsigned short x;
- unsigned short y;
-};
-
-typedef enum SCREEN_ID
-{
- UP_SCREEN = 1,
- DOWN_SCREEN = 2,
- DUAL_SCREEN = 3,
- JOINTUSE_SCREEN = 3
-} SCREEN_ID;
-
-#define UP_MASK 0x1
-#define DOWN_MASK 0x2
-#define DUAL_MASK 0x3
-
-//video buffer address of up screen
-extern void* up_screen_addr;
-
-//video buffer address of down screen
-extern void* down_screen_addr;
-
-//every time call ds2_updateAudio() function, the ds2io layer will transfer
-//audio_samples_per_trans *4 bytes audio data to NDS
-extern unsigned int audio_samples_per_trans;
-
-/*
-* Function: initialize ds2 I/O(DS2 Input and Output) layer
-* audio_samples_lenght: ds2io layer's audio buffer length, it unit is sample
-* which is fixed 4(ds2io use stereo and 16-bit audio) bytes,
-* audio_samples_lenght sholud be 128*n, 128 <= audio_samples_lenght <= 4096
-* NOTE: the audio sampling frequence be fixed to 44.1KHz, 2 channels 16-bit
-*/
-extern int ds2io_init(int audio_samples_lenght);
-
-/*
-* Function: initialize ds2 I/O(DS2 Input and Output) layer (b version)
-* audio_samples_lenght: ds2io layer's audio buffer length, it unit is sample
-* which is fixed 4(ds2io use stereo and 16-bit audio) bytes,
-* audio_samples_lenght sholud be 128*n, 128 <= audio_samples_lenght <= 4096
-* audio_samples_freq: audio samples frequence, it should be among 44100, 22050,
-* 11025
-* reserved1: reserved for future using
-* reserved2: reserved for future using
-* NOTE: the audio samples are 2 channels 16-bit
-*/
-extern int ds2io_initb(int audio_samples_lenght, int audio_samples_freq, int reserved1,
- int reserved2);
-
-/*
-* Function: update video data from buffer to screen, the ds2io layer have 2 video
-* buffers for up screen and 2 video buffers for down screen, everytime
-* ds2_flipScreen is called, up_screen_addr and/or down_buffer_addr
-* point to the other buffer, but not always do so, see below.
-* screen_num: UP_SCREEN, only update up screen
-* DOWN_SCREEN, only update down screen
-* DUAL_SCREEN, update both up screen and down screen
-* done: after updating video data, the up_screen_addr and/or down_buffer_addr
-* are ready to point the other buffer, but if the other buffer is busy:
-* when done = 0, ds2_flipScreen returns without change up_screen_addr
-* and/or down_buffer_addr pointer. it will not sure the graphic just
-* updated will appear on the screen
-* when done = 1, it will WAIT untill the other buffer idle and change
-* the pointers and returns. the graphic just updated will appear on
-* the screen, but please noting the word "WAIT"
-* when done = 2, it will WAIT untill the other buffer idle, then return
-* without change the pointers, it is convenient for GUI drawing
-*/
-extern void ds2_flipScreen(enum SCREEN_ID screen_num, int done);
-
-/*
-* Function: set the video buffer to a single color
-* screen_num: UP_SCREEN, only set up screen buffer
-* DOWN_SCREEN, only set down screen buffer
-* DUAL_SCREEN, set both up screen and down screen buffer
-*/
-extern void ds2_clearScreen(enum SCREEN_ID screen_num, unsigned short color);
-
-
-/*
-* Function: there are AUDIO_BUFFER_COUNT audio buffers on the ds2io layer, this function to
-* check how many buffers are occupied
-*/
-extern int ds2_checkAudiobuff(void);
-
-/*
-* Function: get audio buffer address
-* NOTE: ds2_getAudiobuff may return NULL, even if ds2_checkAudiobuff() < AUDIO_BUFFER_COUNT.
-* The fact are that, AUDIO_BUFFER_COUNT audio buffers are on NDS, the ds2io layer using
-* 2 other buffers transfering data to the AUDIO_BUFFER_COUNT audio buffers alternately,
-* this function checks the 2 buffers in ds2io layers whether are occupied,
-* it will return the address of the idle buffer, else it return NULL
-*/
-extern void* ds2_getAudiobuff(void);
-
-/*
-* Function: flush audio data from buffer to ds2io layer
- NOTE: execution of the function ds2_updateAudio() only put audio data transfer request to wait queue,
- it is not equal that the audio data reach NDS buffer.
-*/
-extern void ds2_updateAudio(void);
-
-
-/*
-* Function: set audio info
-* audio_samples_freq: default freq 44100Hz
-* audio_sample_bit: 16bit
-* audio_samples_lenght: sholud be 128*n, 128 <= audio_samples_lenght <= 4096
-* channels: 2
-* data_format: 0: interleave(L R L R L R L R ...) 1: group(L L L L ...R R R R ...)
-*/
-void ds2_setAudio( unsigned int audio_samples_freq, int audio_sample_bit, unsigned int audio_samples_lenght, int channels, int data_format );
-
-
-#ifndef RGB15
-#define RGB15(r,g,b) (((r)|((g)<<5)|((b)<<10))|BIT(15))
-#endif
-
-/*
-* Functin: get time
-*/
-extern void ds2_getTime(struct rtc *time);
-
-/*
-* Function: get brightness of the screens
-* return: fours levels 0, 1, 2, 3
-*/
-extern int ds2_getBrightness(void);
-
-/*
-* Function: set brightness of the screens
-* Input: level, there are 4 levels, 0, 1, 2 and 3
-*/
-extern void ds2_setBrightness(int level);
-
-/*
-* Function: get the swaping state of the screens
-*/
-extern int ds2_getSwap(void);
-
-/*
-* Funciotn: swap up screen and down screen
-*/
-extern void ds2_setSwap(int swap);
-
-/*
-* Function: get backlight status
-* input bit0 = 0 set down screen's backlight off
-* bit0 = 1 set down screen's backlight on
-* bit1 = 0 set up screen's backlight off
-* bit1 = 1 set up screen's backlight on
-*/
-extern void ds2_setBacklight(int backlight);
-
-/*
-* Function: get backlight status
-* return bit0 = 0 the down screen's backlight is off
-* bit0 = 1 the down screen's backlight is on
-* bit1 = 0 the up screen's backlight is off
-* bit1 = 1 the up screen's backlight is on
-*/
-extern int ds2_getBacklight(void);
-
-/*
-* Function: system suspend
-*/
-extern void ds2_setSupend(void);
-
-/*
-* Function: system wakeup
-*/
-extern void ds2_wakeup(void);
-
-/*
-* Function: NDS power offf
-*/
-extern void ds2_shutdown(void);
-
-/*
-* Function: set volume of NDS
-* Input: volume 0- mute
-* 1 - 127 hardware adjust the volume
-* 128-255 software adjust the volume, when close to 255, the sound may
-* be saturation distortion
-*/
-extern void ds2_setVolume(int volume);
-
-/*
-* Funciton: get key value and touch screen position value
-*/
-extern void ds2_getrawInput(struct key_buf *input);
-
-/*
-* Function: system exit, return to DSTWO Menu
-*/
-extern void ds2_plug_exit(void);
-
-/*
-* Function: return ds2sdk version string
-*/
-extern const char* ds2_getVersion(void);
-
-/*
-* Function: Register a function for debug purpos, such as CONSOLE. when keys
-* pressed, function fun will be called in the interruption
-*/
-extern void regist_escape_key(void (*fun)(void), unsigned int keys);
-
-/*
-* Function: release the function fointer registered by regist_escape_key
-*/
-extern void release_escape_key(void);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif //__DS2IO_H__
-
diff --git a/sdk-modifications/include/fat.h b/sdk-modifications/include/fat.h deleted file mode 100755 index 52ec499..0000000 --- a/sdk-modifications/include/fat.h +++ /dev/null @@ -1,118 +0,0 @@ -/* - fat.h - Simple functionality for startup, mounting and unmounting of FAT-based devices. - - Copyright (c) 2006 Michael "Chishm" Chisholm - - Redistribution and use in source and binary forms, with or without modification, - are permitted provided that the following conditions are met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - 2. Redistributions in binary form must reproduce the above copyright notice, - this list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. - 3. The name of the author may not be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED - WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY - AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - - 2006-07-11 - Chishm - * Original release - - 2006-07-14 - * fatInitialise renamed to fatInit - - 2006-07-16 - Chishm - * Added fatInitDefault -*/ - - -#ifndef _LIBFAT_H -#define _LIBFAT_H - -#ifdef __cplusplus -extern "C" { -#endif - -// When compiling for NDS, make sure NDS is defined -#ifndef NDS - #define NDS -#endif - -#include <nds/jtypes.h> -#include "partition.h" -#include "directory.h" -#include "file_allocation_table.h" -//#include "unicode/unicode.h" -#include "fatdir_ex.h" -#include "fatfile_ex.h" - -//typedef enum {PI_DEFAULT, PI_SLOT_1, PI_SLOT_2, PI_CUSTOM} PARTITION_INTERFACE; - -struct IO_INTERFACE_STRUCT ; - -/* -Initialise any inserted block-devices. -Add the fat device driver to the devoptab, making it available for standard file functions. -cacheSize: The number of pages to allocate for each inserted block-device -setAsDefaultDevice: if true, make this the default device driver for file operations -*/ -bool fatInit (u32 cacheSize, bool setAsDefaultDevice); - -/* -Calls fatInit with setAsDefaultDevice = true and cacheSize optimised for the host system. -*/ -bool fatInitDefault (void); - -/* -Special initialize for RPG card -*/ -bool fatInitRPG (void); - -/* -Mount the device specified by partitionNumber -PD_DEFAULT is not allowed, use _FAT_partition_setDefaultDevice -PD_CUSTOM is not allowed, use _FAT_partition_mountCustomDevice -*/ -bool fatMountNormalInterface (PARTITION_INTERFACE partitionNumber, u32 cacheSize); - -/* -Mount a partition on a custom device -*/ -bool fatMountCustomInterface (struct IO_INTERFACE_STRUCT* device, u32 cacheSize); - -/* -Unmount the partition specified by partitionNumber -If there are open files, it will fail -*/ -bool fatUnmount (PARTITION_INTERFACE partitionNumber); - - -/* -Forcibly unmount the partition specified by partitionNumber -Any open files on the partition will become invalid -The cache will be invalidated, and any unflushed writes will be lost -*/ -bool fatUnsafeUnmount (PARTITION_INTERFACE partitionNumber); - -/* -Set the default device for access by fat: and fat0: -PD_DEFAULT is unallowed. -Doesn't do anything useful on GBA, since there is only one device -*/ -bool fatSetDefaultInterface (PARTITION_INTERFACE partitionNumber); - -#ifdef __cplusplus -} -#endif - -#endif // _LIBFAT_H diff --git a/sdk-modifications/include/fatdir.h b/sdk-modifications/include/fatdir.h deleted file mode 100755 index 529e401..0000000 --- a/sdk-modifications/include/fatdir.h +++ /dev/null @@ -1,81 +0,0 @@ -/* - fatdir.h - - Functions used by the newlib disc stubs to interface with - this library - - Copyright (c) 2006 Michael "Chishm" Chisholm - - Redistribution and use in source and binary forms, with or without modification, - are permitted provided that the following conditions are met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - 2. Redistributions in binary form must reproduce the above copyright notice, - this list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. - 3. The name of the author may not be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED - WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY - AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - - 2006-08-13 - Chishm - * Moved all externally visible directory related functions to fatdir - * Added _FAT_mkdir_r - - 2006-08-14 - Chishm - * Added directory iterator functions - - 2007-01-10 - Chishm - * Updated directory iterator functions for DevkitPro r20 -*/ - - -#ifndef _FATDIR_H -#define _FATDIR_H - -//#include <sys/reent.h> -#include <sys/stat.h> -//#include <sys/iosupport.h> -#include "fs_common.h" -#include "directory.h" - -typedef struct { - PARTITION* partition; - DIR_ENTRY currentEntry; - u32 startCluster; - u32 posEntry; - bool inUse; - bool validEntry; -} DIR_STATE_STRUCT; - -extern int _FAT_stat_r (struct _reent *r, const char *path, struct stat *st); - -extern int _FAT_link_r (struct _reent *r, const char *existing, const char *newLink); - -extern int _FAT_unlink_r (struct _reent *r, const char *name); - -extern int _FAT_chdir_r (struct _reent *r, const char *name); - -extern int _FAT_rename_r (struct _reent *r, const char *oldName, const char *newName); - -extern int _FAT_mkdir_r (struct _reent *r, const char *path, int mode); - -/* -Directory iterator functions -*/ -extern DIR_STATE_STRUCT* _FAT_diropen_r(struct _reent *r, DIR_STATE_STRUCT *dirState, const char *path); -extern int _FAT_dirreset_r (struct _reent *r, DIR_STATE_STRUCT *dirState); -extern int _FAT_dirnext_r (struct _reent *r, DIR_STATE_STRUCT *dirState, struct stat *filestat); -extern int _FAT_dirclose_r (struct _reent *r, DIR_STATE_STRUCT *dirState); - - -#endif // _FATDIR_H diff --git a/sdk-modifications/include/fatdir_ex.h b/sdk-modifications/include/fatdir_ex.h deleted file mode 100755 index fbac46f..0000000 --- a/sdk-modifications/include/fatdir_ex.h +++ /dev/null @@ -1,18 +0,0 @@ -#ifndef _FATDIR_EX_H_
-#define _FATDIR_EX_H_
- -#include "fatdir.h" -
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-int dirnextl (DIR_ITER *dirState, char *filename, char *longFilename, struct stat *filestat);
-int renamex( const char *oldName, const char *newName );
-
-#ifdef __cplusplus
-}
-#endif
-
-
-#endif//_FATDIR_EX_H_
diff --git a/sdk-modifications/include/fatfile.h b/sdk-modifications/include/fatfile.h deleted file mode 100755 index 4869562..0000000 --- a/sdk-modifications/include/fatfile.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - fatfile.h - - Functions used by the newlib disc stubs to interface with - this library - - Copyright (c) 2006 Michael "Chishm" Chisholm - - Redistribution and use in source and binary forms, with or without modification, - are permitted provided that the following conditions are met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - 2. Redistributions in binary form must reproduce the above copyright notice, - this list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. - 3. The name of the author may not be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED - WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY - AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - - 2006-07-11 - Chishm - * Original release - - 2006-07-17 - Chishm - * Made all path inputs const char* - * Added _FAT_rename_r - - 2006-07-24 - Chishm - * Removed padding workaround from FILE_STRUCT - - 2006-08-13 - Chishm - * Moved all externally visible directory related functions to fatdir -*/ - - -#ifndef _FATFILE_H -#define _FATFILE_H - -//#include <sys/reent.h> -#include <sys/stat.h> - -#include "fs_common.h" -#include "partition.h" -#include "directory.h" - -typedef struct { - u32 cluster; - u32 sector; - s32 byte; -} FILE_POSITION; - -typedef struct { - int fd; - u32 filesize; - u32 startCluster; - u32 currentPosition; - FILE_POSITION rwPosition; - FILE_POSITION appendPosition; - bool read; - bool write; - bool append; - bool inUse; - PARTITION* partition; - DIR_ENTRY_POSITION dirEntryStart; // Points to the start of the LFN entries of a file, or the alias for no LFN - DIR_ENTRY_POSITION dirEntryEnd; // Always points to the file's alias entry -} FILE_STRUCT; - -extern int _FAT_open_r (struct _reent *r, void *fileStruct, const char *path, int flags); - -extern int _FAT_close_r (struct _reent *r, int fd); - -extern int _FAT_write_r (struct _reent *r,int fd, const char *ptr, int len); - -extern int _FAT_read_r (struct _reent *r, int fd, char *ptr, int len); - -extern int _FAT_seek_r (struct _reent *r, int fd,int pos, int dir); - -extern int _FAT_fstat_r (struct _reent *r, int fd, struct stat *st); - -#endif // _FATFILE_H diff --git a/sdk-modifications/include/fatfile_ex.h b/sdk-modifications/include/fatfile_ex.h deleted file mode 100755 index c434b63..0000000 --- a/sdk-modifications/include/fatfile_ex.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef _FATFILE_EX_H_
-#define _FATFILE_EX_H_
- -#include <stdio.h> -#include "fatfile.h" -
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-int freadex( void * buffer, int _size, int _n, FILE * f );
-int fwritex( const void * buffer, int _size, int _n, FILE * f ); -
-#ifdef __cplusplus
-}
-#endif
-
-
-#endif//_FATFILE_EX_H_
diff --git a/sdk-modifications/include/file_allocation_table.h b/sdk-modifications/include/file_allocation_table.h deleted file mode 100755 index 4fb4149..0000000 --- a/sdk-modifications/include/file_allocation_table.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - file_allocation_table.h - Reading, writing and manipulation of the FAT structure on - a FAT partition - - Copyright (c) 2006 Michael "Chishm" Chisholm - - Redistribution and use in source and binary forms, with or without modification, - are permitted provided that the following conditions are met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - 2. Redistributions in binary form must reproduce the above copyright notice, - this list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. - 3. The name of the author may not be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED - WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY - AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - - 2006-07-11 - Chishm - * Original release - - 2006-10-01 - Chishm - * Added _FAT_fat_linkFreeClusterCleared to clear a cluster when it is allocated -*/ - -#ifndef _FAT_H -#define _FAT_H - -#include "fs_common.h" -#include "partition.h" - -#define CLUSTER_EOF_16 0xFFFF -#define CLUSTER_EOF 0x0FFFFFFF -#define CLUSTER_FREE 0x0000 -#define CLUSTER_FIRST 0x0002 - -#define CLUSTERS_PER_FAT12 4085 -#define CLUSTERS_PER_FAT16 65525 - - -u32 _FAT_fat_nextCluster(PARTITION* partition, u32 cluster); - -u32 _FAT_fat_linkFreeCluster(PARTITION* partition, u32 cluster); -u32 _FAT_fat_linkFreeClusterCleared (PARTITION* partition, u32 cluster); - -bool _FAT_fat_clearLinks (PARTITION* partition, u32 cluster); - -u32 _FAT_fat_lastCluster (PARTITION* partition, u32 cluster); - -static inline u32 _FAT_fat_clusterToSector (PARTITION* partition, u32 cluster) { - return (cluster >= 2) ? ((cluster - 2) * partition->sectorsPerCluster) + partition->dataStart : partition->rootDirStart; -} - -#endif // _FAT_H diff --git a/sdk-modifications/include/filetime.h b/sdk-modifications/include/filetime.h deleted file mode 100755 index fa651a7..0000000 --- a/sdk-modifications/include/filetime.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - filetime.h - Conversion of file time and date values to various other types - - Copyright (c) 2006 Michael "Chishm" Chisholm - - Redistribution and use in source and binary forms, with or without modification, - are permitted provided that the following conditions are met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - 2. Redistributions in binary form must reproduce the above copyright notice, - this list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. - 3. The name of the author may not be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED - WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY - AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - - 2006-07-11 - Chishm - * Original release -*/ - -#ifndef _FILETIME_H -#define _FILETIME_H - -#include "fs_common.h" -#include <sys/types.h> - -u16 _FAT_filetime_getTimeFromRTC (void); -u16 _FAT_filetime_getDateFromRTC (void); - -time_t _FAT_filetime_to_time_t (u16 time, u16 date); - - -#endif // _FILETIME_H diff --git a/sdk-modifications/include/fs_api.h b/sdk-modifications/include/fs_api.h deleted file mode 100755 index b3431b6..0000000 --- a/sdk-modifications/include/fs_api.h +++ /dev/null @@ -1,151 +0,0 @@ -#ifndef __FS_API_H__
-#define __FS_API_H__
-//v1.0
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include "sys/stat.h"
-#include "fatfile.h"
-#include "fatdir.h"
-
-
-#define mode_t unsigned int
-#define size_t unsigned int
-
-extern int fat_init(void);
-
-extern FILE_STRUCT* fat_fopen(const char *file, const char *mode);
-
-extern size_t fat_fread(void *buf, size_t size, size_t count, FILE_STRUCT *fp);
-
-extern size_t fat_fwrite(const void *buf, size_t size, size_t count, FILE_STRUCT *fp);
-
-extern int fat_fclose(FILE_STRUCT *fp);
-
-extern int fat_fseek(FILE_STRUCT *fp, long offset, int whence);
-
-extern long fat_ftell(FILE_STRUCT *fp);
-
-extern int fat_feof(FILE_STRUCT *fp);
-
-extern int fat_ferror(FILE_STRUCT *fp);
-
-extern void fat_clearerr(FILE_STRUCT *fp);
-
-extern int fat_fflush(FILE_STRUCT *fp);
-
-extern int fat_fgetc(FILE_STRUCT *fp);
-
-extern char* fat_fgets(char *buf, int n, FILE_STRUCT *fp);
-
-extern int fat_fputc(int ch, FILE_STRUCT *fp);
-
-extern int fat_fputs(const char *s, FILE_STRUCT *fp);
-
-extern int fat_remove(const char *filename);
-
-extern int fat_rename(const char *oldName, const char *newName);
-
-extern int fat_setHidden(const char *name, unsigned char hide);
-
-extern int fat_isHidden(struct stat *st);
-
-extern int fat_getShortName(const char *fullName, char *outName);
-
-extern void fat_rewind(FILE_STRUCT *fp);
-
-extern int fat_fstat(int fildes, struct stat *buf);
-
-extern int fat_fprintf(void* fp, const char *format, ...);
-
-extern int fat_fscanf(FILE_STRUCT *fp, const char *format, ...);
-
-extern DIR_STATE_STRUCT* fat_opendir(const char *name);
-
-extern DIR_ENTRY* fat_readdir(DIR_STATE_STRUCT *dirp);
-
-extern long fat_telldir(DIR_STATE_STRUCT *dirp);
-
-extern void fat_seekdir(DIR_STATE_STRUCT *dirp, long int loc);
-
-extern int fat_closedir(DIR_STATE_STRUCT *dirp);
-
-extern int fat_chdir(const char *path);
-
-extern char* fat_getcwd(char *buf, size_t size);
-
-extern int fat_mkdir(const char *path, mode_t mode);
-
-extern int fat_rmdir(const char *path);
-
-extern int fat_lstat(const char *path, struct stat *buf);
-
-extern DIR_ENTRY* fat_readdir_ex(DIR_STATE_STRUCT *dirp, struct stat *statbuf);
-
-#ifndef SEEK_SET
-#define SEEK_SET 0 /* Seek from beginning of file. */
-#endif
-
-#ifndef SEEK_CUR
-#define SEEK_CUR 1 /* Seek from current position. */
-#endif
-
-#ifndef SEEK_END
-#define SEEK_END 2 /* Seek from end of file. */
-#endif
-
-//#define S_ISDIR(st) (st.st_mode & S_IFDIR)
-
-#define FILE FILE_STRUCT
-#define fopen fat_fopen
-#define fread fat_fread
-#define fwrite fat_fwrite
-#define fclose fat_fclose
-#define fgets fat_fgets
-#define fseek fat_fseek
-#define ftell fat_ftell
-#define feof fat_feof
-#define ferror fat_ferror
-#define fclearerr fat_clearerr
-#define fflush fat_fflush
-#define fgetc fat_fgetc
-#define fgets fat_fgets
-#define fputc fat_fputc
-#define fputs fat_fputs
-#define fprintf fat_fprintf
-#define fscanf fat_fscanf
-#define remove fat_remove
-
-#define DIR DIR_STATE_STRUCT
-#define dirent DIR_ENTRY
-#define opendir fat_opendir
-#define readdir fat_readdir
-#define telldir fat_telldir
-#define seekdir fat_seekdir
-#define closedir fat_closedir
-#define chdir fat_chdir
-#define getcwd fat_getcwd
-#define mkdir fat_mkdir
-#define rmdir fat_rmdir
-
-#define lstat fat_lstat
-#define fstat fat_fstat
-
-#define S_ISHID(st_mode) ((st_mode & S_IHIDDEN) != 0)
-
-//the extended version of readdir_ex
-#define readdir_ex fat_readdir_ex
-
-#define MAX_PATH 512
-#define MAX_FILE 512
-
-//Misc function
-extern bool fat_getDiskSpaceInfo( char * diskName, unsigned int *total, unsigned int *used, unsigned int *freeSpace );
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif //__FS_API_H__
diff --git a/sdk-modifications/include/fs_cache.h b/sdk-modifications/include/fs_cache.h deleted file mode 100755 index b0ab9be..0000000 --- a/sdk-modifications/include/fs_cache.h +++ /dev/null @@ -1,118 +0,0 @@ -/* - cache.h - The cache is not visible to the user. It should be flushed - when any file is closed or changes are made to the filesystem. - - This cache implements a least-used-page replacement policy. This will - distribute sectors evenly over the pages, so if less than the maximum - pages are used at once, they should all eventually remain in the cache. - This also has the benefit of throwing out old sectors, so as not to keep - too many stale pages around. - - Copyright (c) 2006 Michael "Chishm" Chisholm - - Redistribution and use in source and binary forms, with or without modification, - are permitted provided that the following conditions are met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - 2. Redistributions in binary form must reproduce the above copyright notice, - this list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. - 3. The name of the author may not be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED - WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY - AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - - 2006-07-11 - Chishm - * Original release -*/ - -#ifndef _CACHE_H -#define _CACHE_H - -#include "fs_common.h" -#include "disc_io/disc_io.h" - -#define CACHE_PAGE_SIZE BYTES_PER_READ - -typedef struct { - u32 sector; - u32 count; - bool dirty; -} CACHE_ENTRY; - -typedef struct { - const IO_INTERFACE* disc; - u32 numberOfPages; - CACHE_ENTRY* cacheEntries; - u8* pages; -} CACHE; - - -/* -Read data from a sector in the cache -If the sector is not in the cache, it will be swapped in -offset is the position to start reading from -size is the amount of data to read -Precondition: offset + size <= BYTES_PER_READ -*/ -bool _FAT_cache_readPartialSector (CACHE* cache, void* buffer, u32 sector, u32 offset, u32 size); - -/* -Write data to a sector in the cache -If the sector is not in the cache, it will be swapped in. -When the sector is swapped out, the data will be written to the disc -offset is the position to start reading from -size is the amount of data to read -Precondition: offset + size <= BYTES_PER_READ -*/ -bool _FAT_cache_writePartialSector (CACHE* cache, const void* buffer, u32 sector, u32 offset, u32 size); - -/* -Write data to a sector in the cache, zeroing the sector first -If the sector is not in the cache, it will be swapped in. -When the sector is swapped out, the data will be written to the disc -offset is the position to start reading from -size is the amount of data to read -Precondition: offset + size <= BYTES_PER_READ -*/ -bool _FAT_cache_eraseWritePartialSector (CACHE* cache, const void* buffer, u32 sector, u32 offset, u32 size); - -/* -Read a full sector from the cache -*/ -static inline bool _FAT_cache_readSector (CACHE* cache, void* buffer, u32 sector) { - return _FAT_cache_readPartialSector (cache, buffer, sector, 0, BYTES_PER_READ); -} - -/* -Write a full sector to the cache -*/ -static inline bool _FAT_cache_writeSector (CACHE* cache, const void* buffer, u32 sector) { - return _FAT_cache_writePartialSector (cache, buffer, sector, 0, BYTES_PER_READ); -} - -/* -Write any dirty sectors back to disc and clear out the contents of the cache -*/ -bool _FAT_cache_flush (CACHE* cache); - -/* -Clear out the contents of the cache without writing any dirty sectors first -*/ -void _FAT_cache_invalidate (CACHE* cache); - -CACHE* _FAT_cache_constructor (u32 numberOfPages, const IO_INTERFACE* discInterface); - -void _FAT_cache_destructor (CACHE* cache); - -#endif // _CACHE_H diff --git a/sdk-modifications/include/fs_common.h b/sdk-modifications/include/fs_common.h deleted file mode 100755 index db47d9a..0000000 --- a/sdk-modifications/include/fs_common.h +++ /dev/null @@ -1,116 +0,0 @@ -/* - common.h - Common definitions and included files for the FATlib - - Copyright (c) 2006 Michael "Chishm" Chisholm - - Redistribution and use in source and binary forms, with or without modification, - are permitted provided that the following conditions are met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - 2. Redistributions in binary form must reproduce the above copyright notice, - this list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. - 3. The name of the author may not be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED - WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY - AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - - 2006-07-11 - Chishm - * Original release -*/ - -#ifndef _COMMON_H -#define _COMMON_H - -// When compiling for NDS, make sure NDS is defined -#ifndef NDS - #if defined ARM9 || defined ARM7 - #define NDS - #endif -#endif - -#if 0 -#ifdef NDS - #include <nds/jtypes.h> -#else - #include "gba_types.h" -#endif -#endif - -#define BYTES_PER_READ 512 - -// MODIFICATION START [Neb] -// In libfat by Chishm, some types are #define'd here. In the DS2 SDK, -// these types are defined by another header. -#include "ds2_types.h" - -#ifndef bool -#define bool int -#endif - -#ifndef false -#define false 0 -#endif - -#ifndef true -#define true 1 -#endif - -// MODIFICATION END [Neb] - -struct _reent -{ - /* FILE is a big struct and may change over time. To try to achieve binary - compatibility with future versions, put stdin,stdout,stderr here. - These are pointers into member __sf defined below. */ -// __FILE *_stdin, *_stdout, *_stderr; /* XXX */ - - int _errno; /* local copy of errno */ - -// int _inc; /* used by tmpnam */ - -// char *_emergency; - -// int __sdidinit; /* 1 means stdio has been init'd */ - -// int _current_category; /* unused */ -// _CONST char *_current_locale; /* unused */ - -// struct _mprec *_mp; - -// void _EXFNPTR(__cleanup, (struct _reent *)); - -// int _gamma_signgam; - - /* used by some fp conversion routines */ -// int _cvtlen; /* should be size_t */ -// char *_cvtbuf; - -// struct _rand48 *_r48; -// struct __tm *_localtime_buf; -// char *_asctime_buf; - - /* signal info */ -// void (**(_sig_func))(int); - - /* atexit stuff */ -// struct _atexit *_atexit; -// struct _atexit _atexit0; - -// struct _glue __sglue; /* root of glue chain */ -// __FILE *__sf; /* file descriptors */ -// struct _misc_reent *_misc; /* strtok, multibyte states */ -// char *_signal_buf; /* strsignal */ -}; - -#endif // _COMMON_H diff --git a/sdk-modifications/include/fs_unicode.h b/sdk-modifications/include/fs_unicode.h deleted file mode 100755 index 45e9d0a..0000000 --- a/sdk-modifications/include/fs_unicode.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef __FS_UNICODE_H__ -#define __FS_UNICODE_H__ - -extern void _FAT_utf8_to_unicode16( const char* src, u16* dest ); - -extern void _FAT_unicode16_to_utf8( const u16* src, char* dest); - -extern u32 _unistrnlen( const u16* unistr, u32 maxlen ); - -extern int _unistrncmp( const u16 * src, const u16 * dest, u32 maxlen ); - -extern const u16 * _unistrchr( const u16 * str, u16 unichar ); - -int _uniisalnum( u8 ch ); - -#endif //__FS_UNICODE_H__ diff --git a/sdk-modifications/include/mem_allocate.h b/sdk-modifications/include/mem_allocate.h deleted file mode 100755 index 844f6df..0000000 --- a/sdk-modifications/include/mem_allocate.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - mem_allocate.h - Memory allocation and destruction calls - Replace these calls with custom allocators if - malloc is unavailable - - Copyright (c) 2006 Michael "Chishm" Chisholm - - Redistribution and use in source and binary forms, with or without modification, - are permitted provided that the following conditions are met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - 2. Redistributions in binary form must reproduce the above copyright notice, - this list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. - 3. The name of the author may not be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED - WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY - AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - - 2006-07-11 - Chishm - * Original release -*/ - -#ifndef _MEM_ALLOCATE_H -#define _MEM_ALLOCATE_H - -#include "ds2_malloc.h" - -static inline void* _FAT_mem_allocate (size_t size) { - return ((void*)malloc (size)); -} - -static inline void _FAT_mem_free (void* mem) { - return (free ((void*)mem)); -} - -#endif // _MEM_ALLOCATE_H diff --git a/sdk-modifications/include/mips.h b/sdk-modifications/include/mips.h deleted file mode 100755 index 3792565..0000000 --- a/sdk-modifications/include/mips.h +++ /dev/null @@ -1,820 +0,0 @@ -/**************************************************************************
-* *
-* PROJECT : MIPS port for uC/OS-II *
-* *
-* MODULE : MIPS.h *
-* *
-* AUTHOR : Michael Anburaj *
-* URL : http://geocities.com/michaelanburaj/ *
-* EMAIL: michaelanburaj@hotmail.com *
-* *
-* PROCESSOR : MIPS 4Kc (32 bit RISC) - ATLAS board *
-* *
-* TOOL-CHAIN : SDE & Cygnus *
-* *
-* DESCRIPTION : *
-* MIPS processor definitions. *
-* The basic CPU definitions are found in the file archdefs.h, which *
-* is included by mips.h. *
-* *
-* mips.h implements aliases for some of the definitions in archdefs.h *
-* and adds various definitions. *
-* *
-**************************************************************************/
-
-
-#ifndef __MIPS_H__
-#define __MIPS_H__
-
-#include "archdefs.h"
-
-
-/* ********************************************************************* */
-/* Module configuration */
-
-
-/* ********************************************************************* */
-/* Interface macro & data definition */
-
-#ifndef MSK
-#define MSK(n) ((1 << (n)) - 1)
-#endif
-
-/* CPU registers */
-#define SYS_CPUREG_ZERO 0
-#define SYS_CPUREG_AT 1
-#define SYS_CPUREG_V0 2
-#define SYS_CPUREG_V1 3
-#define SYS_CPUREG_A0 4
-#define SYS_CPUREG_A1 5
-#define SYS_CPUREG_A2 6
-#define SYS_CPUREG_A3 7
-#define SYS_CPUREG_T0 8
-#define SYS_CPUREG_T1 9
-#define SYS_CPUREG_T2 10
-#define SYS_CPUREG_T3 11
-#define SYS_CPUREG_T4 12
-#define SYS_CPUREG_T5 13
-#define SYS_CPUREG_T6 14
-#define SYS_CPUREG_T7 15
-#define SYS_CPUREG_S0 16
-#define SYS_CPUREG_S1 17
-#define SYS_CPUREG_S2 18
-#define SYS_CPUREG_S3 19
-#define SYS_CPUREG_S4 20
-#define SYS_CPUREG_S5 21
-#define SYS_CPUREG_S6 22
-#define SYS_CPUREG_S7 23
-#define SYS_CPUREG_T8 24
-#define SYS_CPUREG_T9 25
-#define SYS_CPUREG_K0 26
-#define SYS_CPUREG_K1 27
-#define SYS_CPUREG_GP 28
-#define SYS_CPUREG_SP 29
-#define SYS_CPUREG_S8 30
-#define SYS_CPUREG_FP SYS_CPUREG_S8
-#define SYS_CPUREG_RA 31
-
-
-/* CPU register fp ($30) has an alias s8 */
-#define s8 fp
-
-
-/* Aliases for System Control Coprocessor (CP0) registers */
-#define C0_INDEX C0_Index
-#define C0_RANDOM C0_Random
-#define C0_ENTRYLO0 C0_EntryLo0
-#define C0_ENTRYLO1 C0_EntryLo1
-#define C0_CONTEXT C0_Context
-#define C0_PAGEMASK C0_PageMask
-#define C0_WIRED C0_Wired
-#define C0_BADVADDR C0_BadVAddr
-#define C0_COUNT C0_Count
-#define C0_ENTRYHI C0_EntryHi
-#define C0_COMPARE C0_Compare
-#define C0_STATUS C0_Status
-#define C0_CAUSE C0_Cause
-
-#ifdef C0_PRID /* ArchDefs has an obsolete def. of C0_PRID */
-#undef C0_PRID
-#endif
-#define C0_PRID C0_PRId
-
-#define C0_CONFIG C0_Config
-#define C0_CONFIG1 C0_Config1
-#define C0_LLADDR C0_LLAddr
-#define C0_WATCHLO C0_WatchLo
-#define C0_WATCHHI C0_WatchHi
-#define C0_DEBUG C0_Debug
-#define C0_PERFCNT C0_PerfCnt
-#define C0_ERRCTL C0_ErrCtl
-#define C0_CACHEERR C0_CacheErr
-#define C0_TAGLO C0_TagLo
-#define C0_DATALO C0_DataLo
-#define C0_TAGHI C0_TagHi
-#define C0_DATAHI C0_DataHi
-#define C0_ERROREPC C0_ErrorEPC
-#if 0
-#define C0_DESAVE C0_DESAVE
-#define C0_EPC C0_EPC
-#define C0_DEPC C0_DEPC
-#endif
-
-/* System Control Coprocessor (CP0) registers select fields */
-#define C0_INDEX_SEL 0 /* TLB Index */
-#define C0_RANDOM_SEL 0 /* TLB Random */
-#define C0_TLBLO0_SEL 0 /* TLB EntryLo0 */
-#define C0_TLBLO1_SEL 0 /* TLB EntryLo1 */
-#define C0_CONTEXT_SEL 0 /* Context */
-#define C0_PAGEMASK_SEL 0 /* TLB PageMask */
-#define C0_WIRED_SEL 0 /* TLB Wired */
-#define C0_BADVADDR_SEL 0 /* Bad Virtual Address */
-#define C0_COUNT_SEL 0 /* Count */
-#define C0_ENTRYHI_SEL 0 /* TLB EntryHi */
-#define C0_COMPARE_SEL 0 /* Compare */
-#define C0_STATUS_SEL 0 /* Processor Status */
-#define C0_CAUSE_SEL 0 /* Exception Cause */
-#define C0_EPC_SEL 0 /* Exception PC */
-#define C0_PRID_SEL 0 /* Processor Revision Indentifier */
-#define C0_CONFIG_SEL 0 /* Config */
-#define C0_CONFIG1_SEL 1 /* Config1 */
-#define C0_LLADDR_SEL 0 /* LLAddr */
-#define C0_WATCHLO_SEL 0 /* WatchpointLo */
-#define C0_WATCHHI_SEL 0 /* WatchpointHi */
-#define C0_DEBUG_SEL 0 /* EJTAG Debug Register */
-#define C0_DEPC_SEL 0 /* Program counter at last EJTAG debug exception */
-#define C0_PERFCNT_SEL 0 /* Performance counter interface */
-#define C0_ERRCTL_SEL 0 /* ERRCTL */
-#define C0_CACHEERR_SEL 0 /* CacheErr */
-#define C0_TAGLO_SEL 0 /* TagLo */
-#define C0_DATALO_SEL 1 /* DataLo */
-#define C0_DTAGLO_SEL 2 /* DTagLo */
-#define C0_TAGHI_SEL 0 /* TagHi */
-#define C0_DATAHI_SEL 1 /* DataHi */
-#define C0_DTAGHI_SEL 2 /* DTagHi */
-#define C0_ERROREPC_SEL 0 /* ErrorEPC */
-#define C0_DESAVE_SEL 0 /* EJTAG dbg exc. save register */
-
-
-/* C0_CONFIG register encoding */
-
-#define C0_CONFIG_M_SHF S_ConfigMore
-#define C0_CONFIG_M_MSK M_ConfigMore
-#define C0_CONFIG_M_BIT C0_CONFIG_M_MSK
-
-#define C0_CONFIG_BE_SHF S_ConfigBE
-#define C0_CONFIG_BE_MSK M_ConfigBE
-#define C0_CONFIG_BE_BIT C0_CONFIG_BE_MSK
-
-#define C0_CONFIG_AT_SHF S_ConfigAT
-#define C0_CONFIG_AT_MSK M_ConfigAT
-#define C0_CONFIG_AT_MIPS32 K_ConfigAT_MIPS32
-#define C0_CONFIG_AT_MIPS64_32ADDR K_ConfigAT_MIPS64S
-#define C0_CONFIG_AT_MIPS64 K_ConfigAT_MIPS64
-
-#define C0_CONFIG_AR_SHF S_ConfigAR
-#define C0_CONFIG_AR_MSK M_ConfigAR
-
-#define C0_CONFIG_MT_SHF S_ConfigMT
-#define C0_CONFIG_MT_MSK M_ConfigMT
-#define C0_CONFIG_MT_NONE K_ConfigMT_NoMMU
-#define C0_CONFIG_MT_TLB K_ConfigMT_TLBMMU
-#define C0_CONFIG_MT_BAT K_ConfigMT_BATMMU
-#define C0_CONFIG_MT_NON_STD K_ConfigMT_FMMMU
-
-#define C0_CONFIG_K0_SHF S_ConfigK0
-#define C0_CONFIG_K0_MSK M_ConfigK0
-#define C0_CONFIG_K0_WTHRU_NOALLOC K_CacheAttrCWTnWA
-#define C0_CONFIG_K0_WTHRU_ALLOC K_CacheAttrCWTWA
-#define C0_CONFIG_K0_UNCACHED K_CacheAttrU
-#define C0_CONFIG_K0_NONCOHERENT K_CacheAttrCN
-#define C0_CONFIG_K0_COHERENTXCL K_CacheAttrCCE
-#define C0_CONFIG_K0_COHERENTXCLW K_CacheAttrCCS
-#define C0_CONFIG_K0_COHERENTUPD K_CacheAttrCCU
-#define C0_CONFIG_K0_UNCACHED_ACCEL K_CacheAttrUA
-
-
-/* WC field.
- *
- * This feature is present specifically to support configuration
- * testing of the core in a lead vehicle, and is not supported
- * in any other environment. Attempting to use this feature
- * outside of the scope of a lead vehicle is a violation of the
- * MIPS Architecture, and may cause unpredictable operation of
- * the processor.
- */
-#define C0_CONFIG_WC_SHF 19
-#define C0_CONFIG_WC_MSK (MSK(1) << C0_CONFIG_WC_SHF)
-#define C0_CONFIG_WC_BIT C0_CONFIG_WC_MSK
-
-
-/* C0_CONFIG1 register encoding */
-
-#define C0_CONFIG1_MMUSIZE_SHF S_Config1MMUSize
-#define C0_CONFIG1_MMUSIZE_MSK M_Config1MMUSize
-
-#define C0_CONFIG1_IS_SHF S_Config1IS
-#define C0_CONFIG1_IS_MSK M_Config1IS
-
-#define C0_CONFIG1_IL_SHF S_Config1IL
-#define C0_CONFIG1_IL_MSK M_Config1IL
-
-#define C0_CONFIG1_IA_SHF S_Config1IA
-#define C0_CONFIG1_IA_MSK M_Config1IA
-
-#define C0_CONFIG1_DS_SHF S_Config1DS
-#define C0_CONFIG1_DS_MSK M_Config1DS
-
-#define C0_CONFIG1_DL_SHF S_Config1DL
-#define C0_CONFIG1_DL_MSK M_Config1DL
-
-#define C0_CONFIG1_DA_SHF S_Config1DA
-#define C0_CONFIG1_DA_MSK M_Config1DA
-
-#define C0_CONFIG1_WR_SHF S_Config1WR
-#define C0_CONFIG1_WR_MSK M_Config1WR
-#define C0_CONFIG1_WR_BIT C0_CONFIG1_WR_MSK
-
-#define C0_CONFIG1_CA_SHF S_Config1CA
-#define C0_CONFIG1_CA_MSK M_Config1CA
-#define C0_CONFIG1_CA_BIT C0_CONFIG1_CA_MSK
-
-#define C0_CONFIG1_EP_SHF S_Config1EP
-#define C0_CONFIG1_EP_MSK M_Config1EP
-#define C0_CONFIG1_EP_BIT C0_CONFIG1_EP_MSK
-
-#define C0_CONFIG1_FP_SHF S_Config1FP
-#define C0_CONFIG1_FP_MSK M_Config1FP
-#define C0_CONFIG1_FP_BIT C0_CONFIG1_FP_MSK
-
-
-/* C0_STATUS register encoding */
-
-#define C0_STATUS_CU3_SHF S_StatusCU3
-#define C0_STATUS_CU3_MSK M_StatusCU3
-#define C0_STATUS_CU3_BIT C0_STATUS_CU3_MSK
-
-#define C0_STATUS_CU2_SHF S_StatusCU2
-#define C0_STATUS_CU2_MSK M_StatusCU2
-#define C0_STATUS_CU2_BIT C0_STATUS_CU2_MSK
-
-#define C0_STATUS_CU1_SHF S_StatusCU1
-#define C0_STATUS_CU1_MSK M_StatusCU1
-#define C0_STATUS_CU1_BIT C0_STATUS_CU1_MSK
-
-#define C0_STATUS_CU0_SHF S_StatusCU1
-#define C0_STATUS_CU0_MSK M_StatusCU1
-#define C0_STATUS_CU0_BIT C0_STATUS_CU0_MSK
-
-#define C0_STATUS_RP_SHF S_StatusRP
-#define C0_STATUS_RP_MSK M_StatusRP
-#define C0_STATUS_RP_BIT C0_STATUS_RP_MSK
-
-#define C0_STATUS_FR_SHF S_StatusFR
-#define C0_STATUS_FR_MSK M_StatusFR
-#define C0_STATUS_FR_BIT C0_STATUS_FR_MSK
-
-#define C0_STATUS_RE_SHF S_StatusRE
-#define C0_STATUS_RE_MSK M_StatusRE
-#define C0_STATUS_RE_BIT C0_STATUS_RE_MSK
-
-#define C0_STATUS_BEV_SHF S_StatusBEV
-#define C0_STATUS_BEV_MSK M_StatusBEV
-#define C0_STATUS_BEV_BIT C0_STATUS_BEV_MSK
-
-#define C0_STATUS_TS_SHF S_StatusTS
-#define C0_STATUS_TS_MSK M_StatusTS
-#define C0_STATUS_TS_BIT C0_STATUS_TS_MSK
-
-#define C0_STATUS_SR_SHF S_StatusSR
-#define C0_STATUS_SR_MSK M_StatusSR
-#define C0_STATUS_SR_BIT C0_STATUS_SR_MSK
-
-#define C0_STATUS_NMI_SHF S_StatusNMI
-#define C0_STATUS_NMI_MSK M_StatusNMI
-#define C0_STATUS_NMI_BIT C0_STATUS_NMI_MSK
-
-#define C0_STATUS_IM_SHF S_StatusIM
-#define C0_STATUS_IM_MSK M_StatusIM
-/* Note that the the definitions below indicate the interrupt number
- * rather than the mask.
- * (0..1 for SW interrupts and 2...7 for HW interrupts)
- */
-#define C0_STATUS_IM_SW0 (S_StatusIM0 - S_StatusIM)
-#define C0_STATUS_IM_SW1 (S_StatusIM1 - S_StatusIM)
-#define C0_STATUS_IM_HW0 (S_StatusIM2 - S_StatusIM)
-#define C0_STATUS_IM_HW1 (S_StatusIM3 - S_StatusIM)
-#define C0_STATUS_IM_HW2 (S_StatusIM4 - S_StatusIM)
-#define C0_STATUS_IM_HW3 (S_StatusIM5 - S_StatusIM)
-#define C0_STATUS_IM_HW4 (S_StatusIM6 - S_StatusIM)
-#define C0_STATUS_IM_HW5 (S_StatusIM7 - S_StatusIM)
-
-/* Max interrupt code */
-#define C0_STATUS_IM_MAX C0_STATUS_IM_HW5
-
-#define C0_STATUS_KSU_SHF S_StatusKSU
-#define C0_STATUS_KSU_MSK M_StatusKSU
-
-#define C0_STATUS_UM_SHF S_StatusUM
-#define C0_STATUS_UM_MSK M_StatusUM
-#define C0_STATUS_UM_BIT C0_STATUS_UM_MSK
-
-#define C0_STATUS_ERL_SHF S_StatusERL
-#define C0_STATUS_ERL_MSK M_StatusERL
-#define C0_STATUS_ERL_BIT C0_STATUS_ERL_MSK
-
-#define C0_STATUS_EXL_SHF S_StatusEXL
-#define C0_STATUS_EXL_MSK M_StatusEXL
-#define C0_STATUS_EXL_BIT C0_STATUS_EXL_MSK
-
-#define C0_STATUS_IE_SHF S_StatusIE
-#define C0_STATUS_IE_MSK M_StatusIE
-#define C0_STATUS_IE_BIT C0_STATUS_IE_MSK
-
-
-/* C0_PRID register encoding */
-
-#define C0_PRID_OPT_SHF S_PRIdCoOpt
-#define C0_PRID_OPT_MSK M_PRIdCoOpt
-
-#define C0_PRID_COMP_SHF S_PRIdCoID
-#define C0_PRID_COMP_MSK M_PRIdCoID
-#define C0_PRID_COMP_MIPS K_PRIdCoID_MIPS
-#define C0_PRID_COMP_NOT_MIPS32_64 0
-
-#define C0_PRID_PRID_SHF S_PRIdImp
-#define C0_PRID_PRID_MSK M_PRIdImp
-
-/* Jade */
-#define C0_PRID_PRID_4Kc K_PRIdImp_Jade
-#define C0_PRID_PRID_4Kmp K_PRIdImp_JadeLite /* 4Km/4Kp */
-/* Emerald */
-#define C0_PRID_PRID_4KEc K_PRIdImp_4KEc
-#define C0_PRID_PRID_4KEmp K_PRIdImp_4KEmp
-/* Coral */
-#define C0_PRID_PRID_4KSc K_PRIdImp_4KSc
-/* Opal */
-#define C0_PRID_PRID_5K K_PRIdImp_Opal
-/* Ruby */
-#define C0_PRID_PRID_20Kc K_PRIdImp_Ruby
-/* Other CPUs */
-#define C0_PRID_PRID_R4000 K_PRIdImp_R4000
-#define C0_PRID_PRID_RM52XX K_PRIdImp_R5200
-#define C0_PRID_PRID_RM70XX 0x27
-
-#define C0_PRID_REV_SHF S_PRIdRev
-#define C0_PRID_REV_MSK M_PRIdRev
-
-
-#define MIPS_4Kc ( (C0_PRID_COMP_MIPS << \
- C0_PRID_COMP_SHF) | \
- (C0_PRID_PRID_4Kc << \
- C0_PRID_PRID_SHF) \
- )
-
-#define MIPS_4Kmp ( (C0_PRID_COMP_MIPS << \
- C0_PRID_COMP_SHF) | \
- (C0_PRID_PRID_4Kmp << \
- C0_PRID_PRID_SHF) \
- )
-
-#define MIPS_4KEc ( (C0_PRID_COMP_MIPS << \
- C0_PRID_COMP_SHF) | \
- (C0_PRID_PRID_4KEc << \
- C0_PRID_PRID_SHF) \
- )
-
-#define MIPS_4KEmp ( (C0_PRID_COMP_MIPS << \
- C0_PRID_COMP_SHF) | \
- (C0_PRID_PRID_4KEmp << \
- C0_PRID_PRID_SHF) \
- )
-
-#define MIPS_4KSc ( (C0_PRID_COMP_MIPS << \
- C0_PRID_COMP_SHF) | \
- (C0_PRID_PRID_4KSc << \
- C0_PRID_PRID_SHF) \
- )
-
-#define MIPS_5K ( (C0_PRID_COMP_MIPS << \
- C0_PRID_COMP_SHF) | \
- (C0_PRID_PRID_5K << \
- C0_PRID_PRID_SHF) \
- )
-
-#define MIPS_20Kc ( (C0_PRID_COMP_MIPS << \
- C0_PRID_COMP_SHF) | \
- (C0_PRID_PRID_20Kc << \
- C0_PRID_PRID_SHF) \
- )
-
-#define QED_RM52XX ( (C0_PRID_COMP_NOT_MIPS32_64 << \
- C0_PRID_COMP_SHF) | \
- (C0_PRID_PRID_RM52XX << \
- C0_PRID_PRID_SHF) \
- )
-
-#define QED_RM70XX ( (C0_PRID_COMP_NOT_MIPS32_64 << \
- C0_PRID_COMP_SHF) | \
- (C0_PRID_PRID_RM70XX << \
- C0_PRID_PRID_SHF) \
- )
-
-/* C0_ENTRYHI register encoding */
-
-#define C0_ENTRYHI_VPN2_SHF S_EntryHiVPN2
-#define C0_ENTRYHI_VPN2_MSK M_EntryHiVPN2
-
-#define C0_ENTRYHI_ASID_SHF S_EntryHiASID
-#define C0_ENTRYHI_ASID_MSK M_EntryHiASID
-
-
-/* C0_CAUSE register encoding */
-
-#define C0_CAUSE_BD_SHF S_CauseBD
-#define C0_CAUSE_BD_MSK M_CauseBD
-#define C0_CAUSE_BD_BIT C0_CAUSE_BD_MSK
-
-#define C0_CAUSE_CE_SHF S_CauseCE
-#define C0_CAUSE_CE_MSK M_CauseCE
-
-#define C0_CAUSE_IV_SHF S_CauseIV
-#define C0_CAUSE_IV_MSK M_CauseIV
-#define C0_CAUSE_IV_BIT C0_CAUSE_IV_MSK
-
-#define C0_CAUSE_WP_SHF S_CauseWP
-#define C0_CAUSE_WP_MSK M_CauseWP
-#define C0_CAUSE_WP_BIT C0_CAUSE_WP_MSK
-
-#define C0_CAUSE_IP_SHF S_CauseIP
-#define C0_CAUSE_IP_MSK M_CauseIP
-
-#define C0_CAUSE_CODE_SHF S_CauseExcCode
-#define C0_CAUSE_CODE_MSK M_CauseExcCode
-
-#define C0_CAUSE_CODE_INT EX_INT
-#define C0_CAUSE_CODE_MOD EX_MOD
-#define C0_CAUSE_CODE_TLBL EX_TLBL
-#define C0_CAUSE_CODE_TLBS EX_TLBS
-#define C0_CAUSE_CODE_ADEL EX_ADEL
-#define C0_CAUSE_CODE_ADES EX_ADES
-#define C0_CAUSE_CODE_IBE EX_IBE
-#define C0_CAUSE_CODE_DBE EX_DBE
-#define C0_CAUSE_CODE_SYS EX_SYS
-#define C0_CAUSE_CODE_BP EX_BP
-#define C0_CAUSE_CODE_RI EX_RI
-#define C0_CAUSE_CODE_CPU EX_CPU
-#define C0_CAUSE_CODE_OV EX_OV
-#define C0_CAUSE_CODE_TR EV_TR
-#define C0_CAUSE_CODE_FPE EX_FPE
-#define C0_CAUSE_CODE_WATCH EX_WATCH
-#define C0_CAUSE_CODE_MCHECK EX_MCHECK
-
-/* Max cause code */
-#define C0_CAUSE_CODE_MAX EX_MCHECK
-
-
-/* C0_PAGEMASK register encoding */
-#define C0_PAGEMASK_MASK_SHF S_PageMaskMask
-#define C0_PAGEMASK_MASK_MSK M_PageMaskMask
-#define C0_PAGEMASK_MASK_4K K_PageMask4K
-#define C0_PAGEMASK_MASK_16K K_PageMask16K
-#define C0_PAGEMASK_MASK_64K K_PageMask64K
-#define C0_PAGEMASK_MASK_256K K_PageMask256K
-#define C0_PAGEMASK_MASK_1M K_PageMask1M
-#define C0_PAGEMASK_MASK_4M K_PageMask4M
-#define C0_PAGEMASK_MASK_16M K_PageMask16M
-
-
-/* C0_ENTRYLO0 register encoding (equiv. to C0_ENTRYLO1) */
-#define C0_ENTRYLO0_PFN_SHF S_EntryLoPFN
-#define C0_ENTRYLO0_PFN_MSK M_EntryLoPFN
-
-#define C0_ENTRYLO0_C_SHF S_EntryLoC
-#define C0_ENTRYLO0_C_MSK M_EntryLoC
-
-#define C0_ENTRYLO0_D_SHF S_EntryLoD
-#define C0_ENTRYLO0_D_MSK M_EntryLoD
-
-#define C0_ENTRYLO0_V_SHF S_EntryLoV
-#define C0_ENTRYLO0_V_MSK M_EntryLoV
-
-#define C0_ENTRYLO0_G_SHF S_EntryLoG
-#define C0_ENTRYLO0_G_MSK M_EntryLoG
-
-
-/* FPU (CP1) FIR register encoding */
-#define C1_FIR_3D_SHF S_FIRConfig3D
-#define C1_FIR_3D_MSK M_FIRConfig3D
-
-#define C1_FIR_PS_SHF S_FIRConfigPS
-#define C1_FIR_PS_MSK M_FIRConfigPS
-
-#define C1_FIR_D_SHF S_FIRConfigD
-#define C1_FIR_D_MSK M_FIRConfigD
-
-#define C1_FIR_S_SHF S_FIRConfigS
-#define C1_FIR_S_MSK M_FIRConfigS
-
-#define C1_FIR_PRID_SHF S_FIRImp
-#define C1_FIR_PRID_MSK M_FIRImp
-
-#define C1_FIR_REV_SHF S_FIRRev
-#define C1_FIR_REV_MSK M_FIRRev
-
-
-/* FPU (CP1) FCSR control/status register */
-#define C1_FCSR_FCC_SHF S_FCSRFCC7_1
-#define C1_FCSR_FCC_MSK M_FCSRFCC7_1
-
-#define C1_FCSR_FS_SHF S_FCSRFS
-#define C1_FCSR_FS_MSK M_FCSRFS
-#define C1_FCSR_FS_BIT C1_FCSR_FS_MSK
-
-#define C1_FCSR_CC_SHF S_FCSRCC
-#define C1_FCSR_CC_MSK M_FCSRCC
-
-#define C1_FCSR_IMPL_SHF S_FCSRImpl
-#define C1_FCSR_IMPL_MSK M_FCSRImpl
-
-#define C1_FCSR_EXC_SHF S_FCSRExc
-#define C1_FCSR_EXC_MSK M_FCSRExc
-
-#define C1_FCSR_ENA_SHF S_FCSREna
-#define C1_FCSR_ENA_MSK M_FCSREna
-
-#define C1_FCSR_FLG_SHF S_FCSRFlg
-#define C1_FCSR_FLG_MSK M_FCSRFlg
-
-#define C1_FCSR_RM_SHF S_FCSRRM
-#define C1_FCSR_RM_MSK M_FCSRRM
-#define C1_FCSR_RM_RN K_FCSRRM_RN
-#define C1_FCSR_RM_RZ K_FCSRRM_RZ
-#define C1_FCSR_RM_RP K_FCSRRM_RP
-#define C1_FCSR_RM_RM K_FCSRRM_RM
-
-
-
-/* cache operations */
-
-#define CACHE_OP( code, type ) ( ((code) << 2) | (type) )
-
-#define ICACHE_INDEX_INVALIDATE CACHE_OP(0x0, 0)
-#define ICACHE_INDEX_LOAD_TAG CACHE_OP(0x1, 0)
-#define ICACHE_INDEX_STORE_TAG CACHE_OP(0x2, 0)
-#define DCACHE_INDEX_WRITEBACK_INVALIDATE CACHE_OP(0x0, 1)
-#define DCACHE_INDEX_LOAD_TAG CACHE_OP(0x1, 1)
-#define DCACHE_INDEX_STORE_TAG CACHE_OP(0x2, 1)
-#define SCACHE_INDEX_STORE_TAG CACHE_OP(0x2, 3)
-
-#define ICACHE_ADDR_HIT_INVALIDATE CACHE_OP(0x4, 0)
-#define ICACHE_ADDR_FILL CACHE_OP(0x5, 0)
-#define ICACHE_ADDR_FETCH_LOCK CACHE_OP(0x7, 0)
-#define DCACHE_ADDR_HIT_INVALIDATE CACHE_OP(0x4, 1)
-#define DCACHE_ADDR_HIT_WRITEBACK_INVALIDATE CACHE_OP(0x5, 1)
-#define DCACHE_ADDR_HIT_WRITEBACK CACHE_OP(0x6, 1)
-#define DCACHE_ADDR_FETCH_LOCK CACHE_OP(0x7, 1)
-
-#define SCACHE_ADDR_HIT_WRITEBACK_INVALIDATE CACHE_OP(0x5, 3)
-
-/* Workaround for bug in early revisions of MIPS 4K family of
- * processors. Only relevant in early engineering samples of test
- * chips (RTL revision <= 3.0).
- *
- * The bug is described in :
- *
- * MIPS32 4K(tm) Processor Core Family RTL Errata Sheet
- * MIPS Document No: MD00003
- *
- * The bug is identified as : C16
- */
-#ifndef SET_MIPS0
-#define SET_MIPS0()
-#define SET_PUSH()
-#define SET_POP()
-#endif
-#define ICACHE_INVALIDATE_WORKAROUND(reg) \
-SET_PUSH(); \
-SET_MIPS0(); \
- la reg, 999f; \
-SET_POP(); \
- cache ICACHE_ADDR_FILL, 0(reg); \
- sync; \
- nop; nop; nop; nop; \
-999:
-
-/* EMPTY_PIPELINE is used for the below cache invalidation operations.
- * When $I is invalidated, there will still be operations in the
- * pipeline. We make sure these are 'nop' operations.
- */
-#define EMPTY_PIPELINE nop; nop; nop; nop
-
-#define ICACHE_INDEX_INVALIDATE_OP(index,scratch) \
- ICACHE_INVALIDATE_WORKAROUND(scratch); \
- cache ICACHE_INDEX_INVALIDATE, 0(index); \
- EMPTY_PIPELINE
-
-#define ICACHE_ADDR_INVALIDATE_OP(addr,scratch) \
- ICACHE_INVALIDATE_WORKAROUND(scratch); \
- cache ICACHE_ADDR_HIT_INVALIDATE, 0(addr); \
- EMPTY_PIPELINE
-
-/* The sync used in the below macro is there in case we are installing
- * a new instruction (flush $D, sync, invalidate $I sequence).
- */
-#define SCACHE_ADDR_HIT_WB_INVALIDATE_OP(reg) \
- cache SCACHE_ADDR_HIT_WRITEBACK_INVALIDATE, 0(reg); \
- sync; \
- EMPTY_PIPELINE
-
-/* Config1 cache field decoding */
-#define CACHE_CALC_SPW(s) ( 64 << (s) )
-#define CACHE_CALC_LS(l) ( (l) ? 2 << (l) : 0 )
-#define CACHE_CALC_BPW(l,s) ( CACHE_CALC_LS(l) * CACHE_CALC_SPW(s) )
-#define CACHE_CALC_ASSOC(a) ( (a) + 1 )
-
-
-/**** Move from/to Coprocessor operations ****/
-
-/* We use ssnop instead of nop operations in order to handle
- * superscalar CPUs.
- * The "sll zero,zero,1" notation is compiler backwards compatible.
- */
-#define SSNOP sll zero,zero,1
-#define NOPS SSNOP; SSNOP; SSNOP; SSNOP
-
-#define MFLO(dst) \
- mflo dst;\
- NOPS
-
-/* Workaround for bug in early revisions of MIPS 4K family of
- * processors.
- *
- * This concerns the nop instruction before mtc0 in the
- * MTC0 macro below.
- *
- * The bug is described in :
- *
- * MIPS32 4K(tm) Processor Core Family RTL Errata Sheet
- * MIPS Document No: MD00003
- *
- * The bug is identified as : C27
- */
-
-#define MTC0(src, dst) \
- nop; \
- mtc0 src,dst;\
- NOPS
-
-#define DMTC0(src, dst) \
- nop; \
- dmtc0 src,dst;\
- NOPS
-
-#define MFC0(dst, src) \
- mfc0 dst,src;\
- NOPS
-
-#define DMFC0(dst, src) \
- dmfc0 dst,src;\
- NOPS
-
-#define MFC0_SEL_OPCODE(dst, src, sel)\
- .##word (0x40000000 | ((dst)<<16) | ((src)<<11) | (sel));\
- NOPS
-
-#define MTC0_SEL_OPCODE(dst, src, sel)\
- .##word (0x40800000 | ((dst)<<16) | ((src)<<11) | (sel));\
- NOPS
-
-#define LDC1(dst, src, offs)\
- .##word (0xd4000000 | ((src)<<21) | ((dst)<<16) | (offs))
-
-#define SDC1(src, dst, offs)\
- .##word (0xf4000000 | ((dst)<<21) | ((src)<<16) | (offs))
-
-
-/* Instruction opcode fields */
-#define OPC_SPECIAL 0x0
-#define OPC_REGIM 0x1
-#define OPC_J 0x2
-#define OPC_JAL 0x3
-#define OPC_BEQ 0x4
-#define OPC_BNE 0x5
-#define OPC_BLEZ 0x6
-#define OPC_BGTZ 0x7
-#define OPC_COP1 0x11
-#define OPC_JALX 0x1D
-#define OPC_BEQL 0x14
-#define OPC_BNEL 0x15
-#define OPC_BLEZL 0x16
-#define OPC_BGTZL 0x17
-
-/* Instruction function fields */
-#define FUNC_JR 0x8
-#define FUNC_JALR 0x9
-
-/* Instruction rt fields */
-#define RT_BLTZ 0x0
-#define RT_BGEZ 0x1
-#define RT_BLTZL 0x2
-#define RT_BGEZL 0x3
-#define RT_BLTZAL 0x10
-#define RT_BGEZAL 0x11
-#define RT_BLTZALL 0x12
-#define RT_BGEZALL 0x13
-
-/* Instruction rs fields */
-#define RS_BC1 0x08
-
-/* Access macros for instruction fields */
-#define MIPS_OPCODE( instr) ((instr) >> 26)
-#define MIPS_FUNCTION(instr) ((instr) & MSK(6))
-#define MIPS_RT(instr) (((instr) >> 16) & MSK(5))
-#define MIPS_RS(instr) (((instr) >> 21) & MSK(5))
-#define MIPS_OFFSET(instr) ((instr) & 0xFFFF)
-#define MIPS_TARGET(instr) ((instr) & MSK(26))
-
-/* Instructions */
-#define OPCODE_DERET 0x4200001f
-#define OPCODE_BREAK 0x0005000d
-#define OPCODE_NOP 0
-#define OPCODE_JUMP(addr) ( (OPC_J << 26) | (((addr) >> 2) & 0x3FFFFFF) )
-
-#define DERET .##word OPCODE_DERET
-
-/* MIPS16e opcodes and instruction field access macros */
-
-#define MIPS16E_OPCODE(inst) (((inst) >> 11) & 0x1f)
-#define MIPS16E_I8_FUNCTION(inst) (((inst) >> 8) & 0x7)
-#define MIPS16E_X(inst) (((inst) >> 26) & 0x1)
-#define MIPS16E_RR_FUNCTION(inst) (((inst) >> 0) & 0x1f)
-#define MIPS16E_RY(inst) (((inst) >> 5) & 0x3)
-#define MIPS16E_OPC_EXTEND 0x1e
-#define MIPS16E_OPC_JAL_X 0x03
-#define MIPS16E_OPC_B 0x02
-#define MIPS16E_OPC_BEQZ 0x04
-#define MIPS16E_OPC_BNEZ 0x05
-#define MIPS16E_OPC_I8 0x0c
-#define MIPS16E_I8_FUNC_BTEQZ 0x00
-#define MIPS16E_I8_FUNC_BTNEZ 0x01
-#define MIPS16E_X_JALX 0x01
-#define MIPS16E_OPC_RR 0x1d
-#define MIPS16E_RR_FUNC_JALRC 0x00
-#define MIPS16E_RR_RY_JRRX 0x00
-#define MIPS16E_RR_RY_JRRA 0x01
-#define MIPS16E_RR_RY_JALR 0x02
-#define MIPS16E_RR_RY_JRCRX 0x04
-#define MIPS16E_RR_RY_JRCRA 0x05
-#define MIPS16E_RR_RY_JALRC 0x06
-
-#define MIPS16E_OPCODE_BREAK 0xE805
-#define MIPS16E_OPCODE_NOP 0x6500
-
-/* MIPS reset vector */
-#define MIPS_RESET_VECTOR 0x1fc00000
-
-/* Clock periods per count register increment */
-#define MIPS4K_COUNT_CLK_PER_CYCLE 2
-#define MIPS5K_COUNT_CLK_PER_CYCLE 2
-#define MIPS20Kc_COUNT_CLK_PER_CYCLE 1
-
-
-/**** MIPS 4K/5K families specific fields of CONFIG register ****/
-
-#define C0_CONFIG_MIPS4K5K_K23_SHF S_ConfigK23
-#define C0_CONFIG_MIPS4K5K_K23_MSK (MSK(3) << C0_CONFIG_MIPS4K5K_K23_SHF)
-
-#define C0_CONFIG_MIPS4K5K_KU_SHF S_ConfigKU
-#define C0_CONFIG_MIPS4K5K_KU_MSK (MSK(3) << C0_CONFIG_MIPS4K5K_KU_SHF)
-
-
-/**** MIPS 20Kc specific fields of CONFIG register ****/
-
-#define C0_CONFIG_MIPS20KC_EC_SHF 28
-#define C0_CONFIG_MIPS20KC_EC_MSK (MSK(3) << C0_CONFIG_MIPS20KC_EC_SHF)
-
-#define C0_CONFIG_MIPS20KC_DD_SHF 27
-#define C0_CONFIG_MIPS20KC_DD_MSK (MSK(1) << C0_CONFIG_MIPS20KC_DD_SHF)
-#define C0_CONFIG_MIPS20KC_DD_BIT C0_CONFIG_MIPS20KC_DD_MSK
-
-#define C0_CONFIG_MIPS20KC_LP_SHF 26
-#define C0_CONFIG_MIPS20KC_LP_MSK (MSK(1) << C0_CONFIG_MIPS20KC_LP_SHF)
-#define C0_CONFIG_MIPS20KC_LP_BIT C0_CONFIG_MIPS20KC_LP_MSK
-
-#define C0_CONFIG_MIPS20KC_SP_SHF 25
-#define C0_CONFIG_MIPS20KC_SP_MSK (MSK(1) << C0_CONFIG_MIPS20KC_SP_SHF)
-#define C0_CONFIG_MIPS20KC_SP_BIT C0_CONFIG_MIPS20KC_SP_MSK
-
-#define C0_CONFIG_MIPS20KC_TI_SHF 24
-#define C0_CONFIG_MIPS20KC_TI_MSK (MSK(1) << C0_CONFIG_MIPS20KC_TI_SHF)
-#define C0_CONFIG_MIPS20KC_TI_BIT C0_CONFIG_MIPS20KC_TI_MSK
-
-
-/* ********************************************************************* */
-/* Interface function definition */
-
-
-/* ********************************************************************* */
-
-#endif /* #ifndef __MIPS_H__ */
diff --git a/sdk-modifications/include/mipsregs.h b/sdk-modifications/include/mipsregs.h deleted file mode 100755 index 5eaac44..0000000 --- a/sdk-modifications/include/mipsregs.h +++ /dev/null @@ -1,985 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1994, 1995, 1996, 1997, 2000, 2001 by Ralf Baechle - * Copyright (C) 2000 Silicon Graphics, Inc. - * Modified for further R[236]000 support by Paul M. Antoine, 1996. - * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. - * Copyright (C) 2003 Maciej W. Rozycki - */ -#ifndef _ASM_MIPSREGS_H -#define _ASM_MIPSREGS_H - -#include <linux/config.h> -#include <linux/linkage.h> - -/* - * The following macros are especially useful for __asm__ - * inline assembler. - */ -#ifndef __STR -#define __STR(x) #x -#endif -#ifndef STR -#define STR(x) __STR(x) -#endif - -/* - * Configure language - */ -#ifdef __ASSEMBLY__ -#define _ULCAST_ -#else -#define _ULCAST_ (unsigned long) -#endif - -/* - * Coprocessor 0 register names - */ -#define CP0_INDEX $0 -#define CP0_RANDOM $1 -#define CP0_ENTRYLO0 $2 -#define CP0_ENTRYLO1 $3 -#define CP0_CONF $3 -#define CP0_CONTEXT $4 -#define CP0_PAGEMASK $5 -#define CP0_WIRED $6 -#define CP0_INFO $7 -#define CP0_BADVADDR $8 -#define CP0_COUNT $9 -#define CP0_ENTRYHI $10 -#define CP0_COMPARE $11 -#define CP0_STATUS $12 -#define CP0_CAUSE $13 -#define CP0_EPC $14 -#define CP0_PRID $15 -#define CP0_CONFIG $16 -#define CP0_LLADDR $17 -#define CP0_WATCHLO $18 -#define CP0_WATCHHI $19 -#define CP0_XCONTEXT $20 -#define CP0_FRAMEMASK $21 -#define CP0_DIAGNOSTIC $22 -#define CP0_DEBUG $23 -#define CP0_DEPC $24 -#define CP0_PERFORMANCE $25 -#define CP0_ECC $26 -#define CP0_CACHEERR $27 -#define CP0_TAGLO $28 -#define CP0_TAGHI $29 -#define CP0_ERROREPC $30 -#define CP0_DESAVE $31 - -/* - * R4640/R4650 cp0 register names. These registers are listed - * here only for completeness; without MMU these CPUs are not useable - * by Linux. A future ELKS port might take make Linux run on them - * though ... - */ -#define CP0_IBASE $0 -#define CP0_IBOUND $1 -#define CP0_DBASE $2 -#define CP0_DBOUND $3 -#define CP0_CALG $17 -#define CP0_IWATCH $18 -#define CP0_DWATCH $19 - -/* - * Coprocessor 0 Set 1 register names - */ -#define CP0_S1_DERRADDR0 $26 -#define CP0_S1_DERRADDR1 $27 -#define CP0_S1_INTCONTROL $20 - -/* - * TX39 Series - */ -#define CP0_TX39_CACHE $7 - -/* - * Coprocessor 1 (FPU) register names - */ -#define CP1_REVISION $0 -#define CP1_STATUS $31 - -/* - * FPU Status Register Values - */ -/* - * Status Register Values - */ - -#define FPU_CSR_FLUSH 0x01000000 /* flush denormalised results to 0 */ -#define FPU_CSR_COND 0x00800000 /* $fcc0 */ -#define FPU_CSR_COND0 0x00800000 /* $fcc0 */ -#define FPU_CSR_COND1 0x02000000 /* $fcc1 */ -#define FPU_CSR_COND2 0x04000000 /* $fcc2 */ -#define FPU_CSR_COND3 0x08000000 /* $fcc3 */ -#define FPU_CSR_COND4 0x10000000 /* $fcc4 */ -#define FPU_CSR_COND5 0x20000000 /* $fcc5 */ -#define FPU_CSR_COND6 0x40000000 /* $fcc6 */ -#define FPU_CSR_COND7 0x80000000 /* $fcc7 */ - -/* - * X the exception cause indicator - * E the exception enable - * S the sticky/flag bit -*/ -#define FPU_CSR_ALL_X 0x0003f000 -#define FPU_CSR_UNI_X 0x00020000 -#define FPU_CSR_INV_X 0x00010000 -#define FPU_CSR_DIV_X 0x00008000 -#define FPU_CSR_OVF_X 0x00004000 -#define FPU_CSR_UDF_X 0x00002000 -#define FPU_CSR_INE_X 0x00001000 - -#define FPU_CSR_ALL_E 0x00000f80 -#define FPU_CSR_INV_E 0x00000800 -#define FPU_CSR_DIV_E 0x00000400 -#define FPU_CSR_OVF_E 0x00000200 -#define FPU_CSR_UDF_E 0x00000100 -#define FPU_CSR_INE_E 0x00000080 - -#define FPU_CSR_ALL_S 0x0000007c -#define FPU_CSR_INV_S 0x00000040 -#define FPU_CSR_DIV_S 0x00000020 -#define FPU_CSR_OVF_S 0x00000010 -#define FPU_CSR_UDF_S 0x00000008 -#define FPU_CSR_INE_S 0x00000004 - -/* rounding mode */ -#define FPU_CSR_RN 0x0 /* nearest */ -#define FPU_CSR_RZ 0x1 /* towards zero */ -#define FPU_CSR_RU 0x2 /* towards +Infinity */ -#define FPU_CSR_RD 0x3 /* towards -Infinity */ - - -/* - * Values for PageMask register - */ -#ifdef CONFIG_CPU_VR41XX - -/* Why doesn't stupidity hurt ... */ - -#define PM_1K 0x00000000 -#define PM_4K 0x00001800 -#define PM_16K 0x00007800 -#define PM_64K 0x0001f800 -#define PM_256K 0x0007f800 - -#else - -#define PM_4K 0x00000000 -#define PM_16K 0x00006000 -#define PM_64K 0x0001e000 -#define PM_256K 0x0007e000 -#define PM_1M 0x001fe000 -#define PM_4M 0x007fe000 -#define PM_16M 0x01ffe000 -#define PM_64M 0x07ffe000 -#define PM_256M 0x1fffe000 - -#endif - -/* - * Values used for computation of new tlb entries - */ -#define PL_4K 12 -#define PL_16K 14 -#define PL_64K 16 -#define PL_256K 18 -#define PL_1M 20 -#define PL_4M 22 -#define PL_16M 24 -#define PL_64M 26 -#define PL_256M 28 - -/* - * R4x00 interrupt enable / cause bits - */ -#define IE_SW0 (_ULCAST_(1) << 8) -#define IE_SW1 (_ULCAST_(1) << 9) -#define IE_IRQ0 (_ULCAST_(1) << 10) -#define IE_IRQ1 (_ULCAST_(1) << 11) -#define IE_IRQ2 (_ULCAST_(1) << 12) -#define IE_IRQ3 (_ULCAST_(1) << 13) -#define IE_IRQ4 (_ULCAST_(1) << 14) -#define IE_IRQ5 (_ULCAST_(1) << 15) - -/* - * R4x00 interrupt cause bits - */ -#define C_SW0 (_ULCAST_(1) << 8) -#define C_SW1 (_ULCAST_(1) << 9) -#define C_IRQ0 (_ULCAST_(1) << 10) -#define C_IRQ1 (_ULCAST_(1) << 11) -#define C_IRQ2 (_ULCAST_(1) << 12) -#define C_IRQ3 (_ULCAST_(1) << 13) -#define C_IRQ4 (_ULCAST_(1) << 14) -#define C_IRQ5 (_ULCAST_(1) << 15) - -/* - * Bitfields in the R4xx0 cp0 status register - */ -#define ST0_IE 0x00000001 -#define ST0_EXL 0x00000002 -#define ST0_ERL 0x00000004 -#define ST0_KSU 0x00000018 -# define KSU_USER 0x00000010 -# define KSU_SUPERVISOR 0x00000008 -# define KSU_KERNEL 0x00000000 -#define ST0_UX 0x00000020 -#define ST0_SX 0x00000040 -#define ST0_KX 0x00000080 -#define ST0_DE 0x00010000 -#define ST0_CE 0x00020000 - -/* - * Bitfields in the R[23]000 cp0 status register. - */ -#define ST0_IEC 0x00000001 -#define ST0_KUC 0x00000002 -#define ST0_IEP 0x00000004 -#define ST0_KUP 0x00000008 -#define ST0_IEO 0x00000010 -#define ST0_KUO 0x00000020 -/* bits 6 & 7 are reserved on R[23]000 */ -#define ST0_ISC 0x00010000 -#define ST0_SWC 0x00020000 -#define ST0_CM 0x00080000 - -/* - * Bits specific to the R4640/R4650 - */ -#define ST0_UM (_ULCAST_(1) << 4) -#define ST0_IL (_ULCAST_(1) << 23) -#define ST0_DL (_ULCAST_(1) << 24) - -/* - * Bitfields in the TX39 family CP0 Configuration Register 3 - */ -#define TX39_CONF_ICS_SHIFT 19 -#define TX39_CONF_ICS_MASK 0x00380000 -#define TX39_CONF_ICS_1KB 0x00000000 -#define TX39_CONF_ICS_2KB 0x00080000 -#define TX39_CONF_ICS_4KB 0x00100000 -#define TX39_CONF_ICS_8KB 0x00180000 -#define TX39_CONF_ICS_16KB 0x00200000 - -#define TX39_CONF_DCS_SHIFT 16 -#define TX39_CONF_DCS_MASK 0x00070000 -#define TX39_CONF_DCS_1KB 0x00000000 -#define TX39_CONF_DCS_2KB 0x00010000 -#define TX39_CONF_DCS_4KB 0x00020000 -#define TX39_CONF_DCS_8KB 0x00030000 -#define TX39_CONF_DCS_16KB 0x00040000 - -#define TX39_CONF_CWFON 0x00004000 -#define TX39_CONF_WBON 0x00002000 -#define TX39_CONF_RF_SHIFT 10 -#define TX39_CONF_RF_MASK 0x00000c00 -#define TX39_CONF_DOZE 0x00000200 -#define TX39_CONF_HALT 0x00000100 -#define TX39_CONF_LOCK 0x00000080 -#define TX39_CONF_ICE 0x00000020 -#define TX39_CONF_DCE 0x00000010 -#define TX39_CONF_IRSIZE_SHIFT 2 -#define TX39_CONF_IRSIZE_MASK 0x0000000c -#define TX39_CONF_DRSIZE_SHIFT 0 -#define TX39_CONF_DRSIZE_MASK 0x00000003 - -/* - * Status register bits available in all MIPS CPUs. - */ -#define ST0_IM 0x0000ff00 -#define STATUSB_IP0 8 -#define STATUSF_IP0 (_ULCAST_(1) << 8) -#define STATUSB_IP1 9 -#define STATUSF_IP1 (_ULCAST_(1) << 9) -#define STATUSB_IP2 10 -#define STATUSF_IP2 (_ULCAST_(1) << 10) -#define STATUSB_IP3 11 -#define STATUSF_IP3 (_ULCAST_(1) << 11) -#define STATUSB_IP4 12 -#define STATUSF_IP4 (_ULCAST_(1) << 12) -#define STATUSB_IP5 13 -#define STATUSF_IP5 (_ULCAST_(1) << 13) -#define STATUSB_IP6 14 -#define STATUSF_IP6 (_ULCAST_(1) << 14) -#define STATUSB_IP7 15 -#define STATUSF_IP7 (_ULCAST_(1) << 15) -#define STATUSB_IP8 0 -#define STATUSF_IP8 (_ULCAST_(1) << 0) -#define STATUSB_IP9 1 -#define STATUSF_IP9 (_ULCAST_(1) << 1) -#define STATUSB_IP10 2 -#define STATUSF_IP10 (_ULCAST_(1) << 2) -#define STATUSB_IP11 3 -#define STATUSF_IP11 (_ULCAST_(1) << 3) -#define STATUSB_IP12 4 -#define STATUSF_IP12 (_ULCAST_(1) << 4) -#define STATUSB_IP13 5 -#define STATUSF_IP13 (_ULCAST_(1) << 5) -#define STATUSB_IP14 6 -#define STATUSF_IP14 (_ULCAST_(1) << 6) -#define STATUSB_IP15 7 -#define STATUSF_IP15 (_ULCAST_(1) << 7) -#define ST0_CH 0x00040000 -#define ST0_SR 0x00100000 -#define ST0_TS 0x00200000 -#define ST0_BEV 0x00400000 -#define ST0_RE 0x02000000 -#define ST0_FR 0x04000000 -#define ST0_CU 0xf0000000 -#define ST0_CU0 0x10000000 -#define ST0_CU1 0x20000000 -#define ST0_CU2 0x40000000 -#define ST0_CU3 0x80000000 -#define ST0_XX 0x80000000 /* MIPS IV naming */ - -/* - * Bitfields and bit numbers in the coprocessor 0 cause register. - * - * Refer to your MIPS R4xx0 manual, chapter 5 for explanation. - */ -#define CAUSEB_EXCCODE 2 -#define CAUSEF_EXCCODE (_ULCAST_(31) << 2) -#define CAUSEB_IP 8 -#define CAUSEF_IP (_ULCAST_(255) << 8) -#define CAUSEB_IP0 8 -#define CAUSEF_IP0 (_ULCAST_(1) << 8) -#define CAUSEB_IP1 9 -#define CAUSEF_IP1 (_ULCAST_(1) << 9) -#define CAUSEB_IP2 10 -#define CAUSEF_IP2 (_ULCAST_(1) << 10) -#define CAUSEB_IP3 11 -#define CAUSEF_IP3 (_ULCAST_(1) << 11) -#define CAUSEB_IP4 12 -#define CAUSEF_IP4 (_ULCAST_(1) << 12) -#define CAUSEB_IP5 13 -#define CAUSEF_IP5 (_ULCAST_(1) << 13) -#define CAUSEB_IP6 14 -#define CAUSEF_IP6 (_ULCAST_(1) << 14) -#define CAUSEB_IP7 15 -#define CAUSEF_IP7 (_ULCAST_(1) << 15) -#define CAUSEB_IV 23 -#define CAUSEF_IV (_ULCAST_(1) << 23) -#define CAUSEB_CE 28 -#define CAUSEF_CE (_ULCAST_(3) << 28) -#define CAUSEB_BD 31 -#define CAUSEF_BD (_ULCAST_(1) << 31) - -/* - * Bits in the coprocessor 0 config register. - */ -/* Generic bits. */ -#define CONF_CM_CACHABLE_NO_WA 0 -#define CONF_CM_CACHABLE_WA 1 -#define CONF_CM_UNCACHED 2 -#define CONF_CM_CACHABLE_NONCOHERENT 3 -#define CONF_CM_CACHABLE_CE 4 -#define CONF_CM_CACHABLE_COW 5 -#define CONF_CM_CACHABLE_CUW 6 -#define CONF_CM_CACHABLE_ACCELERATED 7 -#define CONF_CM_CMASK 7 -#define CONF_BE (_ULCAST_(1) << 15) - -/* Bits common to various processors. */ -#define CONF_CU (_ULCAST_(1) << 3) -#define CONF_DB (_ULCAST_(1) << 4) -#define CONF_IB (_ULCAST_(1) << 5) -#define CONF_DC (_ULCAST_(7) << 6) -#define CONF_IC (_ULCAST_(7) << 9) -#define CONF_EB (_ULCAST_(1) << 13) -#define CONF_EM (_ULCAST_(1) << 14) -#define CONF_SM (_ULCAST_(1) << 16) -#define CONF_SC (_ULCAST_(1) << 17) -#define CONF_EW (_ULCAST_(3) << 18) -#define CONF_EP (_ULCAST_(15)<< 24) -#define CONF_EC (_ULCAST_(7) << 28) -#define CONF_CM (_ULCAST_(1) << 31) - -/* Bits specific to the R4xx0. */ -#define R4K_CONF_SW (_ULCAST_(1) << 20) -#define R4K_CONF_SS (_ULCAST_(1) << 21) -#define R4K_CONF_SB (_ULCAST_(3) << 22) - -/* Bits specific to the R5000. */ -#define R5K_CONF_SE (_ULCAST_(1) << 12) -#define R5K_CONF_SS (_ULCAST_(3) << 20) - -/* Bits specific to the R10000. */ -#define R10K_CONF_DN (_ULCAST_(3) << 3) -#define R10K_CONF_CT (_ULCAST_(1) << 5) -#define R10K_CONF_PE (_ULCAST_(1) << 6) -#define R10K_CONF_PM (_ULCAST_(3) << 7) -#define R10K_CONF_EC (_ULCAST_(15)<< 9) -#define R10K_CONF_SB (_ULCAST_(1) << 13) -#define R10K_CONF_SK (_ULCAST_(1) << 14) -#define R10K_CONF_SS (_ULCAST_(7) << 16) -#define R10K_CONF_SC (_ULCAST_(7) << 19) -#define R10K_CONF_DC (_ULCAST_(7) << 26) -#define R10K_CONF_IC (_ULCAST_(7) << 29) - -/* Bits specific to the VR41xx. */ -#define VR41_CONF_CS (_ULCAST_(1) << 12) -#define VR41_CONF_M16 (_ULCAST_(1) << 20) -#define VR41_CONF_AD (_ULCAST_(1) << 23) - -/* Bits specific to the R30xx. */ -#define R30XX_CONF_FDM (_ULCAST_(1) << 19) -#define R30XX_CONF_REV (_ULCAST_(1) << 22) -#define R30XX_CONF_AC (_ULCAST_(1) << 23) -#define R30XX_CONF_RF (_ULCAST_(1) << 24) -#define R30XX_CONF_HALT (_ULCAST_(1) << 25) -#define R30XX_CONF_FPINT (_ULCAST_(7) << 26) -#define R30XX_CONF_DBR (_ULCAST_(1) << 29) -#define R30XX_CONF_SB (_ULCAST_(1) << 30) -#define R30XX_CONF_LOCK (_ULCAST_(1) << 31) - -/* Bits specific to the TX49. */ -#define TX49_CONF_DC (_ULCAST_(1) << 16) -#define TX49_CONF_IC (_ULCAST_(1) << 17) /* conflict with CONF_SC */ -#define TX49_CONF_HALT (_ULCAST_(1) << 18) -#define TX49_CONF_CWFON (_ULCAST_(1) << 27) - -/* Bits specific to the MIPS32/64 PRA. */ -#define MIPS_CONF_MT (_ULCAST_(7) << 7) -#define MIPS_CONF_AR (_ULCAST_(7) << 10) -#define MIPS_CONF_AT (_ULCAST_(3) << 13) -#define MIPS_CONF_M (_ULCAST_(1) << 31) - -/* - * R10000 performance counter definitions. - * - * FIXME: The R10000 performance counter opens a nice way to implement CPU - * time accounting with a precission of one cycle. I don't have - * R10000 silicon but just a manual, so ... - */ - -/* - * Events counted by counter #0 - */ -#define CE0_CYCLES 0 -#define CE0_INSN_ISSUED 1 -#define CE0_LPSC_ISSUED 2 -#define CE0_S_ISSUED 3 -#define CE0_SC_ISSUED 4 -#define CE0_SC_FAILED 5 -#define CE0_BRANCH_DECODED 6 -#define CE0_QW_WB_SECONDARY 7 -#define CE0_CORRECTED_ECC_ERRORS 8 -#define CE0_ICACHE_MISSES 9 -#define CE0_SCACHE_I_MISSES 10 -#define CE0_SCACHE_I_WAY_MISSPREDICTED 11 -#define CE0_EXT_INTERVENTIONS_REQ 12 -#define CE0_EXT_INVALIDATE_REQ 13 -#define CE0_VIRTUAL_COHERENCY_COND 14 -#define CE0_INSN_GRADUATED 15 - -/* - * Events counted by counter #1 - */ -#define CE1_CYCLES 0 -#define CE1_INSN_GRADUATED 1 -#define CE1_LPSC_GRADUATED 2 -#define CE1_S_GRADUATED 3 -#define CE1_SC_GRADUATED 4 -#define CE1_FP_INSN_GRADUATED 5 -#define CE1_QW_WB_PRIMARY 6 -#define CE1_TLB_REFILL 7 -#define CE1_BRANCH_MISSPREDICTED 8 -#define CE1_DCACHE_MISS 9 -#define CE1_SCACHE_D_MISSES 10 -#define CE1_SCACHE_D_WAY_MISSPREDICTED 11 -#define CE1_EXT_INTERVENTION_HITS 12 -#define CE1_EXT_INVALIDATE_REQ 13 -#define CE1_SP_HINT_TO_CEXCL_SC_BLOCKS 14 -#define CE1_SP_HINT_TO_SHARED_SC_BLOCKS 15 - -/* - * These flags define in which priviledge mode the counters count events - */ -#define CEB_USER 8 /* Count events in user mode, EXL = ERL = 0 */ -#define CEB_SUPERVISOR 4 /* Count events in supvervisor mode EXL = ERL = 0 */ -#define CEB_KERNEL 2 /* Count events in kernel mode EXL = ERL = 0 */ -#define CEB_EXL 1 /* Count events with EXL = 1, ERL = 0 */ - -#ifndef __ASSEMBLY__ - -#define CAUSE_EXCCODE(x) ((CAUSEF_EXCCODE & (x->cp0_cause)) >> CAUSEB_EXCCODE) -#define CAUSE_EPC(x) (x->cp0_epc + (((x->cp0_cause & CAUSEF_BD) >> CAUSEB_BD) << 2)) - -/* - * Functions to access the r10k performance counter and control registers - */ -#define read_r10k_perf_cntr(counter) \ -({ unsigned int __res; \ - __asm__ __volatile__( \ - "mfpc\t%0, "STR(counter) \ - : "=r" (__res)); \ - __res;}) - -#define write_r10k_perf_cntr(counter,val) \ - __asm__ __volatile__( \ - "mtpc\t%0, "STR(counter) \ - : : "r" (val)); - -#define read_r10k_perf_cntl(counter) \ -({ unsigned int __res; \ - __asm__ __volatile__( \ - "mfps\t%0, "STR(counter) \ - : "=r" (__res)); \ - __res;}) - -#define write_r10k_perf_cntl(counter,val) \ - __asm__ __volatile__( \ - "mtps\t%0, "STR(counter) \ - : : "r" (val)); - -/* - * Macros to access the system control coprocessor - */ - -#define __read_32bit_c0_register(source, sel) \ -({ int __res; \ - if (sel == 0) \ - __asm__ __volatile__( \ - "mfc0\t%0, " #source "\n\t" \ - : "=r" (__res)); \ - else \ - __asm__ __volatile__( \ - ".set\tmips32\n\t" \ - "mfc0\t%0, " #source ", " #sel "\n\t" \ - ".set\tmips0\n\t" \ - : "=r" (__res)); \ - __res; \ -}) - -#define __read_64bit_c0_register(source, sel) \ -({ unsigned long __res; \ - if (sel == 0) \ - __asm__ __volatile__( \ - ".set\tmips3\n\t" \ - "dmfc0\t%0, " #source "\n\t" \ - ".set\tmips0" \ - : "=r" (__res)); \ - else \ - __asm__ __volatile__( \ - ".set\tmips64\n\t" \ - "dmfc0\t%0, " #source ", " #sel "\n\t" \ - ".set\tmips0" \ - : "=r" (__res)); \ - __res; \ -}) - -#define __write_32bit_c0_register(register, sel, value) \ -do { \ - if (sel == 0) \ - __asm__ __volatile__( \ - "mtc0\t%z0, " #register "\n\t" \ - : : "Jr" (value)); \ - else \ - __asm__ __volatile__( \ - ".set\tmips32\n\t" \ - "mtc0\t%z0, " #register ", " #sel "\n\t" \ - ".set\tmips0" \ - : : "Jr" (value)); \ -} while (0) - -#define __write_64bit_c0_register(register, sel, value) \ -do { \ - if (sel == 0) \ - __asm__ __volatile__( \ - ".set\tmips3\n\t" \ - "dmtc0\t%z0, " #register "\n\t" \ - ".set\tmips0" \ - : : "Jr" (value)); \ - else \ - __asm__ __volatile__( \ - ".set\tmips64\n\t" \ - "dmtc0\t%z0, " #register ", " #sel "\n\t" \ - ".set\tmips0" \ - : : "Jr" (value)); \ -} while (0) - -#define __read_ulong_c0_register(reg, sel) \ - ((sizeof(unsigned long) == 4) ? \ - __read_32bit_c0_register(reg, sel) : \ - __read_64bit_c0_register(reg, sel)) - -#define __write_ulong_c0_register(reg, sel, val) \ -do { \ - if (sizeof(unsigned long) == 4) \ - __write_32bit_c0_register(reg, sel, val); \ - else \ - __write_64bit_c0_register(reg, sel, val); \ -} while (0) - -/* - * These versions are only needed for systems with more than 38 bits of - * physical address space running the 32-bit kernel. That's none atm :-) - */ -#define __read_64bit_c0_split(source, sel) \ -({ \ - unsigned long long val; \ - unsigned long flags; \ - \ - local_irq_save(flags); \ - if (sel == 0) \ - __asm__ __volatile__( \ - ".set\tmips64\n\t" \ - "dmfc0\t%M0, " #source "\n\t" \ - "dsll\t%L0, %M0, 32\n\t" \ - "dsrl\t%M0, %M0, 32\n\t" \ - "dsrl\t%L0, %L0, 32\n\t" \ - ".set\tmips0" \ - : "=r" (val)); \ - else \ - __asm__ __volatile__( \ - ".set\tmips64\n\t" \ - "dmfc0\t%M0, " #source ", " #sel "\n\t" \ - "dsll\t%L0, %M0, 32\n\t" \ - "dsrl\t%M0, %M0, 32\n\t" \ - "dsrl\t%L0, %L0, 32\n\t" \ - ".set\tmips0" \ - : "=r" (val)); \ - local_irq_restore(flags); \ - \ - val; \ -}) - -#define __write_64bit_c0_split(source, sel, val) \ -do { \ - unsigned long flags; \ - \ - local_irq_save(flags); \ - if (sel == 0) \ - __asm__ __volatile__( \ - ".set\tmips64\n\t" \ - "dsll\t%L0, %L0, 32\n\t" \ - "dsrl\t%L0, %L0, 32\n\t" \ - "dsll\t%M0, %M0, 32\n\t" \ - "or\t%L0, %L0, %M0\n\t" \ - "dmtc0\t%L0, " #source "\n\t" \ - ".set\tmips0" \ - : : "r" (val)); \ - else \ - __asm__ __volatile__( \ - ".set\tmips64\n\t" \ - "dsll\t%L0, %L0, 32\n\t" \ - "dsrl\t%L0, %L0, 32\n\t" \ - "dsll\t%M0, %M0, 32\n\t" \ - "or\t%L0, %L0, %M0\n\t" \ - "dmtc0\t%L0, " #source ", " #sel "\n\t" \ - ".set\tmips0" \ - : : "r" (val)); \ - local_irq_restore(flags); \ -} while (0) - -#define read_c0_index() __read_32bit_c0_register($0, 0) -#define write_c0_index(val) __write_32bit_c0_register($0, 0, val) - -#define read_c0_entrylo0() __read_ulong_c0_register($2, 0) -#define write_c0_entrylo0(val) __write_ulong_c0_register($2, 0, val) - -#define read_c0_entrylo1() __read_ulong_c0_register($3, 0) -#define write_c0_entrylo1(val) __write_ulong_c0_register($3, 0, val) - -#define read_c0_conf() __read_32bit_c0_register($3, 0) -#define write_c0_conf(val) __write_32bit_c0_register($3, 0, val) - -#define read_c0_context() __read_ulong_c0_register($4, 0) -#define write_c0_context(val) __write_ulong_c0_register($4, 0, val) - -#define read_c0_pagemask() __read_32bit_c0_register($5, 0) -#define write_c0_pagemask(val) __write_32bit_c0_register($5, 0, val) - -#define read_c0_wired() __read_32bit_c0_register($6, 0) -#define write_c0_wired(val) __write_32bit_c0_register($6, 0, val) - -#define read_c0_info() __read_32bit_c0_register($7, 0) - -#define read_c0_cache() __read_32bit_c0_register($7, 0) /* TX39xx */ -#define write_c0_cache(val) __write_32bit_c0_register($7, 0, val) - -#define read_c0_count() __read_32bit_c0_register($9, 0) -#define write_c0_count(val) __write_32bit_c0_register($9, 0, val) - -#define read_c0_entryhi() __read_ulong_c0_register($10, 0) -#define write_c0_entryhi(val) __write_ulong_c0_register($10, 0, val) - -#define read_c0_compare() __read_32bit_c0_register($11, 0) -#define write_c0_compare(val) __write_32bit_c0_register($11, 0, val) - -#define read_c0_status() __read_32bit_c0_register($12, 0) -#define write_c0_status(val) __write_32bit_c0_register($12, 0, val) - -#define read_c0_cause() __read_32bit_c0_register($13, 0) -#define write_c0_cause(val) __write_32bit_c0_register($13, 0, val) - -#define read_c0_prid() __read_32bit_c0_register($15, 0) - -#define read_c0_config() __read_32bit_c0_register($16, 0) -#define read_c0_config1() __read_32bit_c0_register($16, 1) -#define read_c0_config2() __read_32bit_c0_register($16, 2) -#define read_c0_config3() __read_32bit_c0_register($16, 3) -#define write_c0_config(val) __write_32bit_c0_register($16, 0, val) -#define write_c0_config1(val) __write_32bit_c0_register($16, 1, val) -#define write_c0_config2(val) __write_32bit_c0_register($16, 2, val) -#define write_c0_config3(val) __write_32bit_c0_register($16, 3, val) - -/* - * The WatchLo register. There may be upto 8 of them. - */ -#define read_c0_watchlo0() __read_ulong_c0_register($18, 0) -#define read_c0_watchlo1() __read_ulong_c0_register($18, 1) -#define read_c0_watchlo2() __read_ulong_c0_register($18, 2) -#define read_c0_watchlo3() __read_ulong_c0_register($18, 3) -#define read_c0_watchlo4() __read_ulong_c0_register($18, 4) -#define read_c0_watchlo5() __read_ulong_c0_register($18, 5) -#define read_c0_watchlo6() __read_ulong_c0_register($18, 6) -#define read_c0_watchlo7() __read_ulong_c0_register($18, 7) -#define write_c0_watchlo0(val) __write_ulong_c0_register($18, 0, val) -#define write_c0_watchlo1(val) __write_ulong_c0_register($18, 1, val) -#define write_c0_watchlo2(val) __write_ulong_c0_register($18, 2, val) -#define write_c0_watchlo3(val) __write_ulong_c0_register($18, 3, val) -#define write_c0_watchlo4(val) __write_ulong_c0_register($18, 4, val) -#define write_c0_watchlo5(val) __write_ulong_c0_register($18, 5, val) -#define write_c0_watchlo6(val) __write_ulong_c0_register($18, 6, val) -#define write_c0_watchlo7(val) __write_ulong_c0_register($18, 7, val) - -/* - * The WatchHi register. There may be upto 8 of them. - */ -#define read_c0_watchhi0() __read_32bit_c0_register($19, 0) -#define read_c0_watchhi1() __read_32bit_c0_register($19, 1) -#define read_c0_watchhi2() __read_32bit_c0_register($19, 2) -#define read_c0_watchhi3() __read_32bit_c0_register($19, 3) -#define read_c0_watchhi4() __read_32bit_c0_register($19, 4) -#define read_c0_watchhi5() __read_32bit_c0_register($19, 5) -#define read_c0_watchhi6() __read_32bit_c0_register($19, 6) -#define read_c0_watchhi7() __read_32bit_c0_register($19, 7) - -#define write_c0_watchhi0(val) __write_32bit_c0_register($19, 0, val) -#define write_c0_watchhi1(val) __write_32bit_c0_register($19, 1, val) -#define write_c0_watchhi2(val) __write_32bit_c0_register($19, 2, val) -#define write_c0_watchhi3(val) __write_32bit_c0_register($19, 3, val) -#define write_c0_watchhi4(val) __write_32bit_c0_register($19, 4, val) -#define write_c0_watchhi5(val) __write_32bit_c0_register($19, 5, val) -#define write_c0_watchhi6(val) __write_32bit_c0_register($19, 6, val) -#define write_c0_watchhi7(val) __write_32bit_c0_register($19, 7, val) - -#define read_c0_xcontext() __read_ulong_c0_register($20, 0) -#define write_c0_xcontext(val) __write_ulong_c0_register($20, 0, val) - -#define read_c0_intcontrol() __read_32bit_c0_register($20, 1) -#define write_c0_intcontrol(val) __write_32bit_c0_register($20, 1, val) - -#define read_c0_framemask() __read_32bit_c0_register($21, 0) -#define write_c0_framemask(val) __write_32bit_c0_register($21, 0, val) - -#define read_c0_debug() __read_32bit_c0_register($23, 0) -#define write_c0_debug(val) __write_32bit_c0_register($23, 0, val) - -#define read_c0_depc() __read_ulong_c0_register($24, 0) -#define write_c0_depc(val) __write_ulong_c0_register($24, 0, val) - -#define read_c0_ecc() __read_32bit_c0_register($26, 0) -#define write_c0_ecc(val) __write_32bit_c0_register($26, 0, val) - -#define read_c0_derraddr0() __read_ulong_c0_register($26, 1) -#define write_c0_derraddr0(val) __write_ulong_c0_register($26, 1, val) - -#define read_c0_cacheerr() __read_32bit_c0_register($27, 0) - -#define read_c0_derraddr1() __read_ulong_c0_register($27, 1) -#define write_c0_derraddr1(val) __write_ulong_c0_register($27, 1, val) - -#define read_c0_taglo() __read_32bit_c0_register($28, 0) -#define write_c0_taglo(val) __write_32bit_c0_register($28, 0, val) - -#define read_c0_taghi() __read_32bit_c0_register($29, 0) -#define write_c0_taghi(val) __write_32bit_c0_register($29, 0, val) - -#define read_c0_errorepc() __read_ulong_c0_register($30, 0) -#define write_c0_errorepc(val) __write_ulong_c0_register($30, 0, val) - -#define read_c0_epc() __read_ulong_c0_register($14, 0) -#define write_c0_epc(val) __write_ulong_c0_register($14, 0, val) - -#if 1 -/* - * Macros to access the system control coprocessor - */ -#define read_32bit_cp0_register(source) \ -({ int __res; \ - __asm__ __volatile__( \ - ".set\tpush\n\t" \ - ".set\treorder\n\t" \ - "mfc0\t%0,"STR(source)"\n\t" \ - ".set\tpop" \ - : "=r" (__res)); \ - __res;}) - -#define read_32bit_cp0_set1_register(source) \ -({ int __res; \ - __asm__ __volatile__( \ - ".set\tpush\n\t" \ - ".set\treorder\n\t" \ - "cfc0\t%0,"STR(source)"\n\t" \ - ".set\tpop" \ - : "=r" (__res)); \ - __res;}) - -/* - * For now use this only with interrupts disabled! - */ -#define read_64bit_cp0_register(source) \ -({ int __res; \ - __asm__ __volatile__( \ - ".set\tmips3\n\t" \ - "dmfc0\t%0,"STR(source)"\n\t" \ - ".set\tmips0" \ - : "=r" (__res)); \ - __res;}) - -#define write_32bit_cp0_register(register,value) \ - __asm__ __volatile__( \ - "mtc0\t%0,"STR(register)"\n\t" \ - "nop" \ - : : "r" (value)); - -#define write_32bit_cp0_set1_register(register,value) \ - __asm__ __volatile__( \ - "ctc0\t%0,"STR(register)"\n\t" \ - "nop" \ - : : "r" (value)); - -#define write_64bit_cp0_register(register,value) \ - __asm__ __volatile__( \ - ".set\tmips3\n\t" \ - "dmtc0\t%0,"STR(register)"\n\t" \ - ".set\tmips0" \ - : : "r" (value)) - -/* - * This should be changed when we get a compiler that support the MIPS32 ISA. - */ -#define read_mips32_cp0_config1() \ -({ int __res; \ - __asm__ __volatile__( \ - ".set\tnoreorder\n\t" \ - ".set\tnoat\n\t" \ - "#.set\tmips64\n\t" \ - "#mfc0\t$1, $16, 1\n\t" \ - "#.set\tmips0\n\t" \ - ".word\t0x40018001\n\t" \ - "move\t%0,$1\n\t" \ - ".set\tat\n\t" \ - ".set\treorder" \ - :"=r" (__res)); \ - __res;}) - -#endif -/* - * Macros to access the floating point coprocessor control registers - */ -#define read_32bit_cp1_register(source) \ -({ int __res; \ - __asm__ __volatile__( \ - ".set\tpush\n\t" \ - ".set\treorder\n\t" \ - "cfc1\t%0,"STR(source)"\n\t" \ - ".set\tpop" \ - : "=r" (__res)); \ - __res;}) - -/* TLB operations. */ -static inline void tlb_probe(void) -{ - __asm__ __volatile__( - ".set noreorder\n\t" - "tlbp\n\t" - ".set reorder"); -} - -static inline void tlb_read(void) -{ - __asm__ __volatile__( - ".set noreorder\n\t" - "tlbr\n\t" - ".set reorder"); -} - -static inline void tlb_write_indexed(void) -{ - __asm__ __volatile__( - ".set noreorder\n\t" - "tlbwi\n\t" - ".set reorder"); -} - -static inline void tlb_write_random(void) -{ - __asm__ __volatile__( - ".set noreorder\n\t" - "tlbwr\n\t" - ".set reorder"); -} - -/* - * Manipulate bits in a c0 register. - */ -#define __BUILD_SET_C0(name,register) \ -static inline unsigned int \ -set_c0_##name(unsigned int set) \ -{ \ - unsigned int res; \ - \ - res = read_c0_##name(); \ - res |= set; \ - write_c0_##name(res); \ - \ - return res; \ -} \ - \ -static inline unsigned int \ -clear_c0_##name(unsigned int clear) \ -{ \ - unsigned int res; \ - \ - res = read_c0_##name(); \ - res &= ~clear; \ - write_c0_##name(res); \ - \ - return res; \ -} \ - \ -static inline unsigned int \ -change_c0_##name(unsigned int change, unsigned int new) \ -{ \ - unsigned int res; \ - \ - res = read_c0_##name(); \ - res &= ~change; \ - res |= (new & change); \ - write_c0_##name(res); \ - \ - return res; \ -} - -__BUILD_SET_C0(status,CP0_STATUS) -__BUILD_SET_C0(cause,CP0_CAUSE) -__BUILD_SET_C0(config,CP0_CONFIG) - -#define set_cp0_status(x) set_c0_status(x) -#define set_cp0_cause(x) set_c0_cause(x) -#define set_cp0_config(x) set_c0_config(x) - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_MIPSREGS_H */ diff --git a/sdk-modifications/include/mmc_api.h b/sdk-modifications/include/mmc_api.h deleted file mode 100755 index 28e75ef..0000000 --- a/sdk-modifications/include/mmc_api.h +++ /dev/null @@ -1,56 +0,0 @@ -#ifndef __MMC_API_H__
-#define __MMC_API_H__
-
-/* Error codes */
-enum mmc_result_t {
- MMC_NO_RESPONSE = -1,
- MMC_NO_ERROR = 0,
- MMC_ERROR_OUT_OF_RANGE,
- MMC_ERROR_ADDRESS,
- MMC_ERROR_BLOCK_LEN,
- MMC_ERROR_ERASE_SEQ,
- MMC_ERROR_ERASE_PARAM,
- MMC_ERROR_WP_VIOLATION,
- MMC_ERROR_CARD_IS_LOCKED,
- MMC_ERROR_LOCK_UNLOCK_FAILED,
- MMC_ERROR_COM_CRC,
- MMC_ERROR_ILLEGAL_COMMAND,
- MMC_ERROR_CARD_ECC_FAILED,
- MMC_ERROR_CC,
- MMC_ERROR_GENERAL,
- MMC_ERROR_UNDERRUN,
- MMC_ERROR_OVERRUN,
- MMC_ERROR_CID_CSD_OVERWRITE,
- MMC_ERROR_STATE_MISMATCH,
- MMC_ERROR_HEADER_MISMATCH,
- MMC_ERROR_TIMEOUT,
- MMC_ERROR_CRC,
- MMC_ERROR_DRIVER_FAILURE,
-};
-
- -/* Get card's sectors*/
- -extern unsigned int MMC_GetSize(void); -
-
-/* initialize MMC/SD card */
-extern int MMC_Initialize(void);
-
-/* read a single block from MMC/SD card */
-extern int MMC_ReadBlock(unsigned int blockaddr, unsigned char *recbuf);
-
-/* read multi blocks from MMC/SD card */
-extern int MMC_ReadMultiBlock(unsigned int blockaddr, unsigned int blocknum, unsigned char *recbuf);
-
-/* write a block to MMC/SD card */
-extern int MMC_WriteBlock(unsigned int blockaddr, unsigned char *recbuf);
-
-/* write multi blocks to MMC/SD card */
-extern int MMC_WriteMultiBlock(unsigned int blockaddr, unsigned int blocknum, unsigned char *recbuf);
-
-/* detect MMC/SD card */
-extern int MMC_DetectStatus(void);
-
-#endif /* __MMC_API_H__ */ - diff --git a/sdk-modifications/include/partition.h b/sdk-modifications/include/partition.h deleted file mode 100755 index 0777b54..0000000 --- a/sdk-modifications/include/partition.h +++ /dev/null @@ -1,131 +0,0 @@ -/* - partition.h - Functions for mounting and dismounting partitions - on various block devices. - - Copyright (c) 2006 Michael "Chishm" Chisholm - - Redistribution and use in source and binary forms, with or without modification, - are permitted provided that the following conditions are met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - 2. Redistributions in binary form must reproduce the above copyright notice, - this list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. - 3. The name of the author may not be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED - WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY - AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - - 2006-07-11 - Chishm - * Original release -*/ - -#ifndef _PARTITION_H -#define _PARTITION_H - -#include "fs_common.h" - -#include "disc_io/disc.h" -#include "fs_cache.h" - -// Device name -extern const char* DEVICE_NAME; - -// Filesystem type -typedef enum {FS_UNKNOWN, FS_FAT12, FS_FAT16, FS_FAT32} FS_TYPE; - -#ifdef NDS -typedef enum {PI_DEFAULT, PI_SLOT_1, PI_SLOT_2, PI_CUSTOM} PARTITION_INTERFACE; -#else -typedef enum {PI_CART_SLOT} PARTITION_INTERFACE; -#endif - -typedef struct { - u32 fatStart; - u32 sectorsPerFat; - u32 lastCluster; - u32 firstFree; -} FAT; - -typedef struct { - const IO_INTERFACE* disc; - CACHE* cache; - // Info about the partition - bool readOnly; // If this is set, then do not try writing to the disc - FS_TYPE filesysType; - u32 totalSize; - u32 rootDirStart; - u32 rootDirCluster; - u32 numberOfSectors; - u32 dataStart; - u32 bytesPerSector; - u32 sectorsPerCluster; - u32 bytesPerCluster; - FAT fat; - // Values that may change after construction - u32 cwdCluster; // Current working directory cluser - u32 openFileCount; -} PARTITION; - -/* -Mount the device specified by partitionDevice -PD_DEFAULT is not allowed, use _FAT_partition_setDefaultDevice -PD_CUSTOM is not allowed, use _FAT_partition_mountCustomDevice -*/ -bool _FAT_partition_mount (PARTITION_INTERFACE partitionNumber, u32 cacheSize); - -/* -Mount a partition on a custom device -*/ -bool _FAT_partition_mountCustomInterface (const IO_INTERFACE* device, u32 cacheSize); - - -/* -Free Mount a partition on a custom device -*/ -bool _FAT_partition_freeMount( int partitionNumber, const IO_INTERFACE* device, u32 cacheSize);
- - -/* -Unmount the partition specified by partitionNumber -If there are open files, it will fail -*/ -bool _FAT_partition_unmount (PARTITION_INTERFACE partitionNumber); - -/* -Forcibly unmount the partition specified by partitionNumber -Any open files on the partition will become invalid -The cache will be invalidated, and any unflushed writes will be lost -*/ -bool _FAT_partition_unsafeUnmount (PARTITION_INTERFACE partitionNumber); - -/* -Set the default device for access by fat: and fat0:, -based on the device number -*/ -bool _FAT_partition_setDefaultInterface (PARTITION_INTERFACE partitionNumber); - -/* -Set the default device for access by fat: and fat0:, -based on the partition pointer -*/ -bool _FAT_partition_setDefaultPartition (PARTITION* partition); - -/* -Return the partition specified in a path -For instance, "fat0:", "fat:", "/" and "fat:/" will all -return the default partition -*/ -PARTITION* _FAT_partition_getPartitionFromPath (const char* path); - -#endif // _PARTITION_H diff --git a/sdk-modifications/include/tcm.h b/sdk-modifications/include/tcm.h deleted file mode 100755 index 4de3333..0000000 --- a/sdk-modifications/include/tcm.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef __TCM_H
-#define __TCM_H
-
-/*
-* Function: makes cpu to idle state. It will be waken up by RTC in the next second.
-* Of course, it can be waken up by keys at any time.
-*/
-int enable_enter_idle(void);
-
-#endif
diff --git a/sdk-modifications/libsrc/Makefile b/sdk-modifications/libsrc/Makefile deleted file mode 100644 index 3d63b76..0000000 --- a/sdk-modifications/libsrc/Makefile +++ /dev/null @@ -1,70 +0,0 @@ - -CURR_DIR = ${shell pwd} -#CROSS :=# -#CROSS := /opt/mipsel-4.1.2-nopic/bin/ -CROSS := /opt/mipsel-4.1.2-nopic/bin/ - - -CC = $(CROSS)mipsel-linux-gcc -AR = $(CROSS)mipsel-linux-ar rcsv - -TOPDIR = . -CONSOLE_DIR = $(TOPDIR)/console -FS_DIR = $(TOPDIR)/fs -KEY_DIR = $(TOPDIR)/key -ZLIB_DIR = $(TOPDIR)/zlib -CORE_DIR = $(TOPDIR)/core - -SRC := - -SSRC := - -INCLUDES := -I../include - -INC := $(INCLUDES) - -CFLAGS := -mips32 -O3 -mno-abicalls -fno-pic -fno-builtin \ - -fno-exceptions -ffunction-sections -mno-long-calls\ - -fomit-frame-pointer -msoft-float -G 4 \ - -fgcse-sm -fgcse-las -fgcse-after-reload \ - -fweb -fpeel-loops - - -include $(CONSOLE_DIR)/console.mk -include $(FS_DIR)/fs.mk -include $(KEY_DIR)/key.mk -include $(ZLIB_DIR)/zlib.mk -include $(CORE_DIR)/core.mk - -#OBJS := $(addsuffix .o , $(basename $(notdir $(SRC)))) -#SOBJS := $(addsuffix .o , $(basename $(notdir $(SSRC)))) - -OBJS := $(SRC:.c=.o) -SOBJS := $(SSRC:.S=.o) - -all : depend libds2a.a - -libds2a.a : $(OBJS) $(SOBJS) - $(AR) $@ $(OBJS) $(SOBJS) - cp $@ ../lib - -clrscreen: - @clear - @clear - -clean : - rm -rf $(OBJS) $(SOBJS) *.a - rm -f depend - -.c.o : - $(CC) $(CFLAGS) $(INC) -o $@ -c $< -.cpp.o : - $(CC) $(CFLAGS) $(INC) -fno-rtti -fvtable-gc -o $@ -c $< -.S.o : - $(CC) $(CFLAGS) $(INC) -D_ASSEMBLER_ -D__ASSEMBLY__ -o $@ -c $< - -depend : Makefile - $(CC) -MM $(CFLAGS) $(INC) $(SSRC) $(SRC) > $@ - -sinclude depend - diff --git a/sdk-modifications/libsrc/changes_bag.txt b/sdk-modifications/libsrc/changes_bag.txt deleted file mode 100644 index 63b82a9..0000000 --- a/sdk-modifications/libsrc/changes_bag.txt +++ /dev/null @@ -1,28 +0,0 @@ -Unofficial libds2a by BassAceGold - Based on 0.13 beta Supercard SDK release, contains full lib with changes - - - -release 1: - -inclusion of ds2_unistd.h and ds2_fcntl.h - -updated zlib to 1.5.2 - -release 2: - -mkdir no longer freezes - -faster fopen times for file reading - (no longer searches for the next cluster to write to with read only mode) - -makes DS2's DMA (direct memory access hardware) features publically available - -adds extra cpu clock speeds (may be unstable) - ds2_setCPULevel(level) - -can now get the current CPU clock speed as an integer value - ds2_getCPUClock() - -release 2 fix 1: - -added ds2_udelay and ds2_mdelay variant functions. - must be used with ds2_setCPULevel for accurate timings, - old functions, udelay and mdelay, should not be used with the new - cpu clock functions - -added further optimizations to makefile - -release 2 fix 2: - -fat_getDiskSpaceInfo no longer freezes diff --git a/sdk-modifications/libsrc/console/console.c b/sdk-modifications/libsrc/console/console.c deleted file mode 100755 index f455ac5..0000000 --- a/sdk-modifications/libsrc/console/console.c +++ /dev/null @@ -1,484 +0,0 @@ -//console.c
-
-#include <stdio.h>
-#include <stdarg.h>
-#include "ds2io.h"
-#include "memory.h"
-#include "font_dot.h"
-
-#define STRING_SIZE 2048
-
-#define CONSOLE_WIDTH 32
-#define CONSOLE_HEIGHT 24
-#define TAB_SIZE 3
- -static void ConsoleView(void); -static void ConsoleDrawfontall(void); -
-static int console_init_done = 0;
-static unsigned short f_color;
-static unsigned short b_color;
-static enum SCREEN_ID console_id;
-
-static int print_row;
-static int print_col;
-static int print_row_saved;
-static int print_col_saved; -
-static unsigned char* console_buf;
-static unsigned int console_buf_size;
-static unsigned char* console_buf_front;
-static unsigned char* console_buf_end;
-static unsigned char* console_print_header;
-static unsigned short* console_screen;
-static unsigned char* print_header_saved; -
-static void ConsoleFlush(void)
-{ - unsigned short* screen_addr; - enum SCREEN_ID id; - - if(console_id & UP_MASK) { - screen_addr = up_screen_addr; - id = UP_SCREEN; - } - else { - screen_addr = down_screen_addr; - id = DOWN_SCREEN; - } - - memcpy((void*)screen_addr, (void*)console_screen, SCREEN_WIDTH*SCREEN_HEIGHT*2); - ds2_flipScreen(id, 1); -}
-
-static void ConsoleClearscreen(void)
-{ - unsigned short *scr; - unsigned int i; - - scr = console_screen; - i = 0; - while(i < SCREEN_WIDTH*SCREEN_HEIGHT) - scr[i++] = b_color;
-}
-
-static void ConsoleMovewin(int dir, int sw_screen)
-{ - unsigned char *pt; - - if(dir || sw_screen) - ConsoleClearscreen(); - - //switch to another screen to dispaly text
- if(sw_screen) - { - ConsoleFlush(); - //now up screen - if(console_id & UP_MASK) { - console_screen = down_screen_addr; - console_id = DOWN_SCREEN; - } - //switch to up screen - else - { - console_screen = up_screen_addr; - console_id = UP_SCREEN; - } - } - - pt = console_print_header + dir*CONSOLE_WIDTH; - - //screen scroll down - if(dir > 0) - { - if(console_buf_end > console_print_header) { - if(pt > console_buf_end) - pt = console_buf_end; - console_print_header = pt; - } - else if(console_buf_end < console_print_header) { - if((pt - console_buf) >= console_buf_size) { - pt -= console_buf_size; - if(pt > console_buf_end) - pt = console_buf_end; - } - console_print_header = pt; - } - } - //screen scroll up - else if(dir < 0) - { - if(console_buf_front > console_print_header) { - if(pt < console_buf) { - pt += console_buf_size; - if(pt < console_buf_front) - pt = console_buf_front; - } - console_print_header = pt; - } - else if(console_buf_front < console_print_header) { - if(pt < console_buf_front) - pt = console_buf_front; - console_print_header = pt; - } - } - - if(dir || sw_screen) - { - print_row_saved = 0; //redraw entire screen
- print_col_saved = 0; - - ConsoleDrawfontall(); - ConsoleFlush(); - }
-}
-
-void ConsoleClr(int mode)
-{
- unsigned char *pt, *pt_end;
- unsigned int i;
-
- //Clear current screen buffer
- if(0 == mode)
- { - if(print_col > 0) { - console_buf_end += CONSOLE_WIDTH; - if((console_buf_end - console_buf) >= console_buf_size) - console_buf_end -= console_buf_size; - } - - console_print_header = console_buf_end; - print_row = 0;
- print_col = 0; - print_row_saved = 0;
- print_col_saved = 0;
- }
- //Clear all
- else if(1 == mode)
- {
- console_buf_front = console_buf;
- console_buf_end = console_buf;
- console_print_header = console_buf;
- print_row = 0;
- print_col = 0; - print_row_saved = 0;
- print_col_saved = 0;
-
- pt = console_buf; - pt_end = console_buf + console_buf_size; - while(pt < pt_end)
- {
- pt[0] = '\0';
- pt += CONSOLE_WIDTH;
- }
- }
-
- ConsoleClearscreen(); - ConsoleFlush(); -}
-
-//Draw part of the screen
-static void ConsoleDrawfont(void)
-{
- unsigned char *pt, *dot_map;
- unsigned char ch, dot;
- unsigned short *dst, *pt_r;
- unsigned int row, col;
- unsigned int x, j, k;
-
- pt_r = console_screen;
- row = print_row_saved;
- col = print_col_saved;
- x = col*8;
-
- pt = console_print_header + row * CONSOLE_WIDTH;
-
- while(row != print_row || col != print_col)
- { - ch = pt[col++] & 0x7F;
- //'\n'
- if('\n' == ch || '\0' == ch || col > CONSOLE_WIDTH) {
- pt += CONSOLE_WIDTH;
- if((pt - console_buf) >= console_buf_size) pt -= console_buf_size;
- col = 0;
- row += 1;
- x = 0;
- }
- //character not '\n' nor '\0'
- else {
- dot_map = (unsigned char*)font_map[ch];
-
- for(j= 0; j < 8; j++)
- {
- dot = *dot_map++;
- dst = pt_r + (row*8+j)*SCREEN_WIDTH + x;
- for(k = 0; k < 8; k++)
- *dst++ = (dot & (0x80>>k)) ? f_color : b_color;
- } - x += 8;
- }
- }
-}
-
-//Redraw the hole screen
-static void ConsoleDrawfontall(void)
-{
- unsigned char *pt, *end_pt, *dot_map;
- unsigned int i, j, k;
- unsigned char ch, dot;
- unsigned short *dst, *pt_r;
- unsigned int x, y;
- - //Clear screen to b_color
- pt_r = console_screen;
- i = 0; - while(i < SCREEN_WIDTH*SCREEN_HEIGHT) - pt_r[i++] = b_color;
-
- pt = console_print_header;
- end_pt = console_buf_end;
- x = 0;
- y = 0;
- i = 0;
- while(pt != end_pt)
- {
- ch = pt[i++] & 0x7F;
- //'\n'
- if('\n' == ch || '\0' == ch || i > CONSOLE_WIDTH) {
- pt += CONSOLE_WIDTH;
- if((pt - console_buf) >= console_buf_size) pt -= console_buf_size;
- i = 0;
- x = 0;
- y += 1; - if(y >= CONSOLE_HEIGHT) break;
- }
- //character not '\n' nor '\0'
- else {
- dot_map = (unsigned char*)font_map[ch];
- - for(j= 0; j < 8; j++)
- {
- dot = *dot_map++;
- dst = pt_r + (y*8+j)*SCREEN_WIDTH + x;
- for(k = 0; k < 8; k++)
- *dst++ = (dot & (0x80>>k)) ? f_color : b_color;
- }
- x += 8;
- }
- }
-}
-
-static void ConsoleNewline(void)
-{
- print_row += 1;
- if(print_row >= CONSOLE_HEIGHT)
- { - print_row -= 1;
- console_print_header += CONSOLE_WIDTH;
- if((console_print_header - console_buf) >= console_buf_size)
- console_print_header = console_buf;
-
- print_row_saved = 0;
- print_col_saved = 0; - - ConsoleClearscreen();
- }
-
- console_buf_end += CONSOLE_WIDTH;
- if((console_buf_end - console_buf) >= console_buf_size) - console_buf_end = console_buf; -
- //scrollback
- if(console_buf_end == console_buf_front)
- { - console_buf_front += CONSOLE_WIDTH;
- if((console_buf_front - console_buf) >= console_buf_size) - console_buf_front = console_buf; - - console_buf_end[0] = '\0';
- }
-}
-
-static void ConsolePrintchar(unsigned char ch)
-{
- int i;
-
- if(print_col >= CONSOLE_WIDTH) {
- print_col = 0;
- ConsoleNewline();
- }
-
- switch(ch) {
- case 9: //'\t'
- if((print_col + TAB_SIZE) < CONSOLE_WIDTH)
- {
- i = print_col % TAB_SIZE;
- i = TAB_SIZE - i;
- while(i--)
- {
- console_buf_end[print_col] = ' ';
- print_col += 1;
- }
- }
- break;
- case 10: //'\n'
- case 13: //'\r'
- console_buf_end[print_col] = '\n';
- print_col = 0;
- ConsoleNewline();
- break;
- default:
- console_buf_end[print_col] = ch;
- if(ch != '\0')
- print_col += 1;
- break;
- }
-}
-
-void ConsolePrintstring(unsigned char* string)
-{
- unsigned char *pt;
- unsigned char ch;
- - print_row_saved = print_row;
- print_col_saved = print_col; - console_print_header = print_header_saved;
-//cprintf("print_row %d; print_col %d; [%s]\n", print_row, print_col, string);
- pt = string;
- do
- {
- ch = *pt++;
- ConsolePrintchar(ch);
- }
- while ('\0' != ch);
- - print_header_saved = console_print_header; -
- ConsoleDrawfont();
- ConsoleFlush();
-}
-
-//---------------------------------------------------------------------------------
-//parameter:
-// front_color: color of character
-// background_color: background color
-// screen: UP-up screen used as output, DOWN-down screen used as output,
-// using only one screen at a time
-// buf_size: buffer size to hold the output, it's unit is screen
-//---------------------------------------------------------------------------------
-int ConsoleInit(unsigned short front_color, unsigned short background_color, enum SCREEN_ID screen, unsigned int buf_size)
-{
- unsigned char *pt;
- unsigned int size;
- unsigned short **scr_ppt; -
- console_init_done = 0;
- f_color = front_color;
- b_color = background_color;
- - - //Using only one screen at a time - if(screen & UP_MASK) - console_id = UP_SCREEN; - else - console_id = DOWN_SCREEN; - - if(!buf_size) buf_size = 1;
- size = buf_size *CONSOLE_WIDTH *CONSOLE_HEIGHT; -
- pt = (unsigned char*)Drv_alloc(size);
- if(NULL == pt)
- return -1; //there is something error
-
- console_buf = pt;
- memset(console_buf, 0, size);
-
- print_row = 0;
- print_col = 0; - print_row_saved = print_row;
- print_col_saved = print_col;
- console_buf_size = size;
- console_buf_front = console_buf;
- console_buf_end = console_buf;
- console_print_header = console_buf; - print_header_saved = console_print_header;
-
- console_screen = (unsigned short*)Drv_alloc(SCREEN_WIDTH * SCREEN_HEIGHT*2);
- if(NULL == console_screen) {
- Drv_deAlloc((void*)console_buf);
- return -1;
- }
-
- ConsoleClr(1);
-
- console_init_done = 1; - - regist_escape_key(ConsoleView, (KEY_L | KEY_R | KEY_A | KEY_B | KEY_X));
- return 0;
-}
- -void ConsoleView(void) -{ - unsigned int key; - -cprintf("enter console mode\n"); - - do { - key = getKey(); - - switch(key) - { - //screen scroll down 1 line - case KEY_UP: - ConsoleMovewin(-1, 0); - break; - - //screen scroll up 1 line - case KEY_DOWN: - ConsoleMovewin(1, 0); - break; - - //screen scroll done (CONSOLE_HEIGHT-1) line - case KEY_LEFT: - ConsoleMovewin(-(CONSOLE_HEIGHT-1), 0); - break; - - //screen scroll up (CONSOLE_HEIGHT-1) line - case KEY_RIGHT: - ConsoleMovewin(CONSOLE_HEIGHT-1, 0); - break; - - //switch screen - case KEY_B: -cprintf("switch to another screen\n"); - ConsoleMovewin(0, 1); - break; - - default: break; - } - - mdelay(20); - } while(key != KEY_Y); - -cprintf("exit console mode\n"); -} -
-int printf(const char *format, ...)
-{
- char string[STRING_SIZE];
- int ret;
- va_list ap;
- - if(!console_init_done) - return 0; - - va_start (ap, format);
- ret = vsnprintf(string, STRING_SIZE, format, ap);
- va_end (ap);
-
- ConsolePrintstring(string);
-
- return ret;
-}
-
-
diff --git a/sdk-modifications/libsrc/console/console.h b/sdk-modifications/libsrc/console/console.h deleted file mode 100755 index f6d74a4..0000000 --- a/sdk-modifications/libsrc/console/console.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef __CONSOLE_H__
-#define __CONSOLE_H__
-#include "ds2io.h" -
-extern int ConsoleInit(unsigned short front_color, unsigned short background_color, enum SCREEN_ID screen, unsigned int buf_size);
-
-extern int cprintf(const char *format, ...);
-
-#endif //__CONSOLE_H__ diff --git a/sdk-modifications/libsrc/console/console.mk b/sdk-modifications/libsrc/console/console.mk deleted file mode 100755 index b8a436e..0000000 --- a/sdk-modifications/libsrc/console/console.mk +++ /dev/null @@ -1,10 +0,0 @@ -#console.mk - -SRC += $(CONSOLE_DIR)/console.c - -SSRC += - -INC += -I$(CONSOLE_DIR) - -CFLAGS += - diff --git a/sdk-modifications/libsrc/console/font_dot.h b/sdk-modifications/libsrc/console/font_dot.h deleted file mode 100755 index cdf6067..0000000 --- a/sdk-modifications/libsrc/console/font_dot.h +++ /dev/null @@ -1,75 +0,0 @@ -#ifndef __FONT_DOT_H__ -#define __FONT_DOT_H__ - -//version 0.1 -//modified ''', '(',')',';','?','[',']','^','_''`','{','}','~' - -const unsigned char font_map[128][8] = { - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0f, 0x08, 0x08, 0x08, 0x08, - 0x00, 0x00, 0x00, 0x78, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x0f, 0x00, 0x00, 0x00, 0x00, - 0x08, 0x08, 0x08, 0x78, 0x00, 0x00, 0x00, 0x00, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, - 0x00, 0x00, 0x00, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x3c, 0x3c, 0x18, 0x00, 0x00, 0x00, - 0x7c, 0x64, 0x44, 0x44, 0x64, 0x7c, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x08, 0x10, 0x70, 0x50, 0x50, 0x70, 0x00, - 0x24, 0x24, 0x1c, 0x08, 0x3f, 0x08, 0x08, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x16, 0x1a, 0x12, 0x12, 0x16, 0x34, 0x20, 0x00, 0x3c, 0x24, 0x24, 0x66, 0x24, 0x3c, 0x08, 0x08, - 0x08, 0x08, 0x08, 0x7f, 0x08, 0x08, 0x08, 0x08, 0x0c, 0x1c, 0x3c, 0x3c, 0x1c, 0x0c, 0x04, 0x00, - 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x1c, 0x18, 0x18, 0x18, 0x18, 0x00, 0x18, 0x00, 0x00, - 0x54, 0x54, 0x34, 0x14, 0x14, 0x14, 0x14, 0x14, 0x08, 0x08, 0x08, 0x7f, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x7f, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x78, 0x08, 0x08, 0x08, 0x08, - 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x0f, 0x08, 0x08, 0x08, 0x08, - 0x00, 0x00, 0x08, 0x7c, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x7c, 0x20, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x10, 0x10, 0x10, 0x10, 0x00, 0x10, 0x00, - 0x28, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x14, 0x14, 0x7e, 0x28, 0x7e, 0x28, 0x28, 0x00, - 0x1c, 0x2c, 0x28, 0x18, 0x0c, 0x2c, 0x3c, 0x08, 0x64, 0x68, 0x68, 0x7c, 0x1c, 0x1c, 0x2c, 0x00, - 0x30, 0x30, 0x3c, 0x28, 0x58, 0x50, 0x3c, 0x00, 0x30, 0x30, 0x10, 0x20, 0x00, 0x00, 0x00, 0x00, //''' - 0x04, 0x08, 0x10, 0x10, 0x10, 0x10, 0x08, 0x04, 0x40, 0x20, 0x10, 0x10, 0x10, 0x10, 0x20, 0x40, - 0x10, 0x54, 0x38, 0x38, 0x54, 0x10, 0x00, 0x00, 0x10, 0x10, 0x7c, 0x10, 0x10, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x20, 0x40, 0x00, 0x00, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x08, 0x08, 0x10, 0x10, 0x20, 0x20, 0x20, 0x40, - 0x18, 0x24, 0x24, 0x24, 0x24, 0x24, 0x18, 0x00, 0x10, 0x30, 0x10, 0x10, 0x10, 0x10, 0x38, 0x00, - 0x18, 0x24, 0x04, 0x08, 0x10, 0x20, 0x3c, 0x00, 0x18, 0x24, 0x04, 0x18, 0x04, 0x24, 0x18, 0x00, - 0x08, 0x18, 0x28, 0x48, 0x7c, 0x08, 0x08, 0x00, 0x3c, 0x20, 0x38, 0x04, 0x04, 0x24, 0x18, 0x00, - 0x38, 0x40, 0x40, 0x78, 0x44, 0x44, 0x38, 0x00, 0x3c, 0x08, 0x08, 0x10, 0x10, 0x10, 0x10, 0x00, - 0x18, 0x24, 0x24, 0x18, 0x24, 0x24, 0x18, 0x00, 0x18, 0x24, 0x24, 0x1c, 0x04, 0x04, 0x18, 0x00, - 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x10, 0x10, 0x20, //';' - 0x04, 0x08, 0x10, 0x20, 0x10, 0x08, 0x04, 0x00, 0x00, 0x00, 0x7c, 0x00, 0x00, 0x7c, 0x00, 0x00, - 0x20, 0x10, 0x08, 0x04, 0x08, 0x10, 0x20, 0x00, 0x10, 0x24, 0x24, 0x08, 0x10, 0x10, 0x00, 0x10, //'?' - 0x38, 0x4c, 0x54, 0x5c, 0x54, 0x44, 0x38, 0x00, 0x10, 0x10, 0x28, 0x28, 0x38, 0x28, 0x6c, 0x00, - 0x78, 0x24, 0x38, 0x24, 0x24, 0x24, 0x78, 0x00, 0x3c, 0x44, 0x40, 0x40, 0x40, 0x44, 0x38, 0x00, - 0x78, 0x24, 0x24, 0x24, 0x24, 0x24, 0x78, 0x00, 0x7c, 0x24, 0x20, 0x38, 0x20, 0x24, 0x7c, 0x00, - 0x7c, 0x24, 0x28, 0x38, 0x28, 0x20, 0x70, 0x00, 0x38, 0x40, 0x40, 0x40, 0x5c, 0x48, 0x30, 0x00, - 0x76, 0x24, 0x24, 0x3c, 0x24, 0x24, 0x76, 0x00, 0x38, 0x10, 0x10, 0x10, 0x10, 0x10, 0x38, 0x00, - 0x38, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x60, 0x74, 0x28, 0x30, 0x30, 0x28, 0x28, 0x6c, 0x00, - 0x70, 0x20, 0x20, 0x20, 0x20, 0x24, 0x7c, 0x00, 0x66, 0x3c, 0x3c, 0x3c, 0x34, 0x24, 0x66, 0x00, - 0x6e, 0x24, 0x34, 0x34, 0x2c, 0x24, 0x74, 0x00, 0x38, 0x44, 0x44, 0x44, 0x44, 0x44, 0x38, 0x00, - 0x78, 0x24, 0x24, 0x38, 0x20, 0x20, 0x70, 0x00, 0x38, 0x44, 0x44, 0x44, 0x74, 0x4c, 0x38, 0x0c, - 0x78, 0x24, 0x38, 0x28, 0x24, 0x24, 0x76, 0x00, 0x1c, 0x24, 0x20, 0x18, 0x04, 0x24, 0x38, 0x00, - 0x7c, 0x54, 0x10, 0x10, 0x10, 0x10, 0x38, 0x00, 0x66, 0x24, 0x24, 0x24, 0x24, 0x24, 0x18, 0x00, - 0x6c, 0x28, 0x28, 0x28, 0x28, 0x10, 0x10, 0x00, 0x7e, 0x52, 0x52, 0x2c, 0x2c, 0x24, 0x24, 0x00, - 0x6c, 0x28, 0x28, 0x10, 0x28, 0x28, 0x6c, 0x00, 0x6c, 0x28, 0x28, 0x10, 0x10, 0x10, 0x38, 0x00, - 0x7c, 0x48, 0x10, 0x10, 0x20, 0x24, 0x7c, 0x00, 0x00, 0x1c, 0x10, 0x10, 0x10, 0x10, 0x10, 0x1c, - 0x20, 0x20, 0x10, 0x10, 0x08, 0x08, 0x08, 0x04, 0x00, 0x38, 0x08, 0x08, 0x08, 0x08, 0x08, 0x38, //']' - 0x10, 0x28, 0x28, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, - 0x20, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x48, 0x38, 0x48, 0x3c, 0x00, //'a' - 0x60, 0x20, 0x38, 0x24, 0x24, 0x24, 0x38, 0x00, 0x00, 0x00, 0x1c, 0x24, 0x20, 0x20, 0x1c, 0x00, - 0x0c, 0x04, 0x1c, 0x24, 0x24, 0x24, 0x1e, 0x00, 0x00, 0x00, 0x18, 0x24, 0x3c, 0x20, 0x1c, 0x00, - 0x0c, 0x10, 0x3c, 0x10, 0x10, 0x10, 0x38, 0x00, 0x00, 0x00, 0x3c, 0x28, 0x38, 0x20, 0x3c, 0x3c, - 0x60, 0x20, 0x38, 0x24, 0x24, 0x24, 0x76, 0x00, 0x10, 0x00, 0x30, 0x10, 0x10, 0x10, 0x38, 0x00, - 0x08, 0x00, 0x18, 0x08, 0x08, 0x08, 0x08, 0x38, 0x60, 0x20, 0x2c, 0x28, 0x30, 0x28, 0x6c, 0x00, - 0x30, 0x10, 0x10, 0x10, 0x10, 0x10, 0x38, 0x00, 0x00, 0x00, 0x78, 0x54, 0x54, 0x54, 0x54, 0x00, - 0x00, 0x00, 0x78, 0x24, 0x24, 0x24, 0x76, 0x00, 0x00, 0x00, 0x38, 0x44, 0x44, 0x44, 0x38, 0x00, - 0x00, 0x00, 0x78, 0x24, 0x24, 0x24, 0x38, 0x70, 0x00, 0x00, 0x1c, 0x24, 0x24, 0x24, 0x1c, 0x0e, - 0x00, 0x00, 0x34, 0x18, 0x10, 0x10, 0x38, 0x00, 0x00, 0x00, 0x3c, 0x20, 0x18, 0x04, 0x3c, 0x00, - 0x10, 0x10, 0x38, 0x10, 0x10, 0x10, 0x08, 0x00, 0x00, 0x00, 0x6c, 0x24, 0x24, 0x24, 0x1e, 0x00, - 0x00, 0x00, 0x6c, 0x28, 0x28, 0x28, 0x10, 0x00, 0x00, 0x00, 0x6f, 0x2a, 0x2a, 0x36, 0x14, 0x00, - 0x00, 0x00, 0x7c, 0x28, 0x10, 0x28, 0x7c, 0x00, 0x00, 0x00, 0x7c, 0x28, 0x10, 0x10, 0x20, 0x60, - 0x00, 0x00, 0x3c, 0x08, 0x08, 0x10, 0x3c, 0x00, 0x00, 0x08, 0x10, 0x10, 0x20, 0x10, 0x10, 0x08, - 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, 0x20, 0x10, 0x10, 0x08, 0x10, 0x10, 0x20, - 0x00, 0x00, 0x20, 0x54, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 - }; - -#endif //__FONT_DOT_H__ - diff --git a/sdk-modifications/libsrc/core/core.mk b/sdk-modifications/libsrc/core/core.mk deleted file mode 100644 index 4ed3ca8..0000000 --- a/sdk-modifications/libsrc/core/core.mk +++ /dev/null @@ -1,11 +0,0 @@ -#fs.mk - -SRC += $(CORE_DIR)/ds2_dma.c \ - $(CORE_DIR)/ds2_cpuclock.c - -SSRC += - -INC += -I$(CORE_DIR) - -CFLAGS += - diff --git a/sdk-modifications/libsrc/core/ds2_cpuclock.c b/sdk-modifications/libsrc/core/ds2_cpuclock.c deleted file mode 100644 index 145218d..0000000 --- a/sdk-modifications/libsrc/core/ds2_cpuclock.c +++ /dev/null @@ -1,272 +0,0 @@ -#include <ds2_types.h> - -#include "ds2_cpuclock.h" - -#define REG8(addr) *((volatile u8 *)(addr)) -#define REG16(addr) *((volatile u16 *)(addr)) -#define REG32(addr) *((volatile u32 *)(addr)) - -#define SDRAM_TRAS 50 /* RAS# Active Time */ -#define SDRAM_RCD 23 /* RAS# to CAS# Delay */ -#define SDRAM_TPC 23 /* RAS# Precharge Time */ -#define SDRAM_TRWL 7 /* Write Latency Time */ -#define SDRAM_TREF 7813 /* Refresh period: 8192 refresh cycles/64ms */ - -#define EMC_BASE 0xB3010000 -#define EMC_DMCR (EMC_BASE + 0x80) /* DRAM Control Register */ -#define REG_EMC_DMCR REG32(EMC_DMCR) -#define EMC_RTCSR (EMC_BASE + 0x84) /* Refresh Time Control/Status Register */ -#define REG_EMC_RTCSR REG16(EMC_RTCSR) -#define EMC_RTCOR (EMC_BASE + 0x8c) /* Refresh Time Constant Register */ -#define REG_EMC_RTCOR REG16(EMC_RTCOR) -#define EMC_RTCNT (EMC_BASE + 0x88) /* Refresh Timer Counter */ -#define REG_EMC_RTCNT REG16(EMC_RTCNT) - - - -#define CPM_BASE 0xB0000000 -#define CPM_CPCCR (CPM_BASE+0x00) -#define CPM_CPPCR (CPM_BASE+0x10) -//#define CPM_RSR (CPM_BASE+0x08) -#define REG_CPM_CPCCR REG32(CPM_CPCCR) -#define REG_CPM_CPPCR REG32(CPM_CPPCR) -#define CPM_CPCCR_CE (1 << 22) - - - - - - -#define EMC_DMCR_TRAS_BIT 13 -#define EMC_DMCR_TRAS_MASK (0x07 << EMC_DMCR_TRAS_BIT) -#define EMC_DMCR_RCD_BIT 11 -#define EMC_DMCR_RCD_MASK (0x03 << EMC_DMCR_RCD_BIT) -#define EMC_DMCR_TPC_BIT 8 -#define EMC_DMCR_TPC_MASK (0x07 << EMC_DMCR_TPC_BIT) -#define EMC_DMCR_TRWL_BIT 5 -#define EMC_DMCR_TRWL_MASK (0x03 << EMC_DMCR_TRWL_BIT) -#define EMC_DMCR_TRC_BIT 2 -#define EMC_DMCR_TRC_MASK (0x07 << EMC_DMCR_TRC_BIT) - -#define EMC_RTCSR_CKS_BIT 0 -#define EMC_RTCSR_CKS_MASK (0x07 << EMC_RTCSR_CKS_BIT) - - -#define CPM_CPCCR_LDIV_BIT 16 -#define CPM_CPCCR_LDIV_MASK (0x1f << CPM_CPCCR_LDIV_BIT) -#define CPM_CPCCR_MDIV_BIT 12 -#define CPM_CPCCR_MDIV_MASK (0x0f << CPM_CPCCR_MDIV_BIT) -#define CPM_CPCCR_PDIV_BIT 8 -#define CPM_CPCCR_PDIV_MASK (0x0f << CPM_CPCCR_PDIV_BIT) -#define CPM_CPCCR_HDIV_BIT 4 -#define CPM_CPCCR_HDIV_MASK (0x0f << CPM_CPCCR_HDIV_BIT) -#define CPM_CPCCR_CDIV_BIT 0 -#define CPM_CPCCR_CDIV_MASK (0x0f << CPM_CPCCR_CDIV_BIT) - - -#define CPM_CPPCR_PLLM_BIT 23 -#define CPM_CPPCR_PLLM_MASK (0x1ff << CPM_CPPCR_PLLM_BIT) -#define CPM_CPPCR_PLLN_BIT 18 -#define CPM_CPPCR_PLLN_MASK (0x1f << CPM_CPPCR_PLLN_BIT) -#define CPM_CPPCR_PLLOD_BIT 16 -#define CPM_CPPCR_PLLOD_MASK (0x03 << CPM_CPPCR_PLLOD_BIT) -#define CPM_CPPCR_PLLS (1 << 10) -#define CPM_CPPCR_PLLBP (1 << 9) -#define CPM_CPPCR_PLLEN (1 << 8) -#define CPM_CPPCR_PLLST_BIT 0 -#define CPM_CPPCR_PLLST_MASK (0xff << CPM_CPPCR_PLLST_BIT) - - -#define PLL_M 0 -#define PLL_N 1 -#define PLL_CCLK 2 -#define PLL_HCLK 3 -#define PLL_MCLK 4 -#define PLL_PCLK 5 - -#define CFG_EXTAL 24000000 -#define EXTAL_CLK CFG_EXTAL - - -#define __cpm_get_pllm() \ - ((REG_CPM_CPPCR & CPM_CPPCR_PLLM_MASK) >> CPM_CPPCR_PLLM_BIT) - -#define __cpm_get_plln() \ - ((REG_CPM_CPPCR & CPM_CPPCR_PLLN_MASK) >> CPM_CPPCR_PLLN_BIT) - -#define __cpm_get_cdiv() \ - ((REG_CPM_CPCCR & CPM_CPCCR_CDIV_MASK) >> CPM_CPCCR_CDIV_BIT) - - -static unsigned char pll_m_n[CPU_MAX_LEVEL_EX + 1][6] = { - //M, N, CCLK, HCLK, MCLK, PCLK, EXT_CLK=24MHz - {10-2, 2-2, 1, 1, 1, 1}, //0 60, 60, 1/1 - {10-2, 2-2, 0, 1, 1, 1}, //1 120, 60, 1/2 - {10-2, 2-2, 0, 0, 0, 0}, //2 120, 120, 1/1 - {12-2, 2-2, 0, 1, 1, 1}, //3 144, 72, 1/2 - {16-2, 2-2, 0, 1, 1, 1}, //4 192, 96, 1/2 - {17-2, 2-2, 0, 0, 1, 1}, //5 204, 102, 1/2 - {20-2, 2-2, 0, 1, 1, 1}, //6 240, 120, 1/2 - {22-2, 2-2, 0, 2, 2, 2}, //7 264, 88, 1/3 - {24-2, 2-2, 0, 2, 2, 2}, //8 288, 96, 1/3 - {25-2, 2-2, 0, 2, 2, 2}, //9 300, 100, 1/3 - {28-2, 2-2, 0, 2, 2, 2}, //10 336, 112, 1/3 - {30-2, 2-2, 0, 2, 2, 2}, //11 360, 120, 1/3 - {32-2, 2-2, 0, 2, 2, 2}, //12 384, 128, 1/3 - {33-2, 2-2, 0, 2, 2, 2}, //13 396, 132, 1/3 - - {34-2, 2-2, 0, 2, 2, 2}, //14 404, 132, 1/3 - {35-2, 2-2, 0, 2, 2, 2}, //15 420, 132, 1/3 - {36-2, 2-2, 0, 2, 2, 2}, //16 438, 132, 1/3 - {37-2, 2-2, 0, 2, 2, 2}, //17 444, 132, 1/3 - {38-2, 2-2, 0, 2, 2, 2}, //18 456, 132, 1/3 - //{39-2, 2-2, 0, 2, 2, 2}, //468, instant crash! - }; - -static int _sdram_convert(unsigned int pllin,unsigned int *sdram_dmcr, unsigned int *sdram_div, unsigned int *sdram_tref) -{ - register unsigned int ns, dmcr,tmp; - - dmcr = ~(EMC_DMCR_TRAS_MASK | EMC_DMCR_RCD_MASK | EMC_DMCR_TPC_MASK | - EMC_DMCR_TRWL_MASK | EMC_DMCR_TRC_MASK) & REG_EMC_DMCR; - - /* Set sdram operation parameter */ - //pllin unit is KHz - ns = 1000000*1024 / pllin; - tmp = SDRAM_TRAS*1024/ns; - if (tmp < 4) tmp = 4; - if (tmp > 11) tmp = 11; - dmcr |= ((tmp-4) << EMC_DMCR_TRAS_BIT); - - tmp = SDRAM_RCD*1024/ns; - if (tmp > 3) tmp = 3; - dmcr |= (tmp << EMC_DMCR_RCD_BIT); - - tmp = SDRAM_TPC*1024/ns; - if (tmp > 7) tmp = 7; - dmcr |= (tmp << EMC_DMCR_TPC_BIT); - - tmp = SDRAM_TRWL*1024/ns; - if (tmp > 3) tmp = 3; - dmcr |= (tmp << EMC_DMCR_TRWL_BIT); - - tmp = (SDRAM_TRAS + SDRAM_TPC)*1024/ns; - if (tmp > 14) tmp = 14; - dmcr |= (((tmp + 1) >> 1) << EMC_DMCR_TRC_BIT); - - *sdram_dmcr = dmcr; - - /* Set refresh registers */ - unsigned int div; - tmp = SDRAM_TREF*1024/ns; - div = (tmp + 254)/255; - if(div <= 4) div = 1; // 1/4 - else if(div <= 16) div = 2; // 1/16 - else div = 3; // 1/64 - - *sdram_div = ~EMC_RTCSR_CKS_MASK & REG_EMC_RTCSR | div; - - unsigned int divm= 4; - while(--div) divm *= 4; - - tmp = tmp/divm + 1; - *sdram_tref = tmp; - - return 0; -} - - -const static int FR2n[] = { - 1, 2, 3, 4, 6, 8, 12, 16, 24, 32 -}; - -static unsigned int _pllout; -static unsigned int _iclk; - -static void detect_clockNew(void){ - _pllout = (__cpm_get_pllm() + 2)* EXTAL_CLK / (__cpm_get_plln() + 2); - _iclk = _pllout / FR2n[__cpm_get_cdiv()]; -} - - -//udelay overclock -void ds2_udelay(unsigned int usec) -{ - unsigned int i = usec * (_iclk / 2000000); - - __asm__ __volatile__ ( - "\t.set noreorder\n" - "1:\n\t" - "bne\t%0, $0, 1b\n\t" - "addi\t%0, %0, -1\n\t" - ".set reorder\n" - : "=r" (i) - : "0" (i) - ); -} - -//mdelay overclock -void ds2_mdelay(unsigned int msec) -{ - int i; - for(i=0;i<msec;i++) - { - ds2_udelay(1000); - } -} - - - - -int ds2_getCPUClock(void){ - return (_pllout/1000/1000); -} - - - -/* convert pll while program is running */ -int ds2_setCPULevel(unsigned int level){ - unsigned int freq_b; - unsigned int dmcr; - unsigned int rtcsr; - unsigned int tref; - unsigned int cpccr; - unsigned int cppcr; - - if(level > CPU_MAX_LEVEL_EX) return -1; - - freq_b = (pll_m_n[level][PLL_M]+2)*(EXTAL_CLK/1000)/(pll_m_n[level][PLL_N]+2); - - //freq_b unit is KHz - _sdram_convert(freq_b/pll_m_n[level][PLL_MCLK], &dmcr, &rtcsr, &tref); - - cpccr = REG_CPM_CPCCR; - cppcr = REG_CPM_CPPCR; - - REG_CPM_CPCCR = ~CPM_CPCCR_CE & cpccr; - - cppcr &= ~(CPM_CPPCR_PLLM_MASK | CPM_CPPCR_PLLN_MASK); - cppcr |= (pll_m_n[level][PLL_M] << CPM_CPPCR_PLLM_BIT) | (pll_m_n[level][PLL_N] << CPM_CPPCR_PLLN_BIT); - - cpccr &= ~(CPM_CPCCR_CDIV_MASK | CPM_CPCCR_HDIV_MASK | CPM_CPCCR_PDIV_MASK | - CPM_CPCCR_MDIV_MASK | CPM_CPCCR_LDIV_MASK); - cpccr |= (pll_m_n[level][PLL_CCLK] << CPM_CPCCR_CDIV_BIT) | (pll_m_n[level][PLL_HCLK] << CPM_CPCCR_HDIV_BIT) | - (pll_m_n[level][PLL_MCLK] << CPM_CPCCR_MDIV_BIT) | (pll_m_n[level][PLL_PCLK] << CPM_CPCCR_PDIV_BIT) | - (31 << CPM_CPCCR_LDIV_BIT); - - REG_CPM_CPCCR = cpccr; - REG_CPM_CPPCR = cppcr; - - REG_CPM_CPCCR |= CPM_CPCCR_CE; - //Wait PLL stable - while(!(CPM_CPPCR_PLLS & REG_CPM_CPPCR)); - - //REG_EMC_DMCR = dmcr; - REG_EMC_RTCOR = tref; - REG_EMC_RTCNT = tref; - - detect_clockNew(); - return 0; -} - - diff --git a/sdk-modifications/libsrc/core/ds2_cpuclock.h b/sdk-modifications/libsrc/core/ds2_cpuclock.h deleted file mode 100644 index c28635b..0000000 --- a/sdk-modifications/libsrc/core/ds2_cpuclock.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef _DS2_CPUCLOCK_H__ -#define _DS2_CPUCLOCK_H__ - - -#define CPU_MAX_LEVEL_EX 18 - -#ifdef __cplusplus -extern "C" { -#endif - -extern int ds2_getCPUClock(void); -extern int ds2_setCPULevel(unsigned int level); -extern void udelayOC(unsigned int usec); -extern void mdelayOC(unsigned int msec); - -//#define ds2_setCPUclocklevel ds2_setCPULevel - -#ifdef __cplusplus -} -#endif - -#endif //__DS2_CPUCLOCK_H__ diff --git a/sdk-modifications/libsrc/core/ds2_dma.c b/sdk-modifications/libsrc/core/ds2_dma.c deleted file mode 100644 index 0b0eca1..0000000 --- a/sdk-modifications/libsrc/core/ds2_dma.c +++ /dev/null @@ -1,34 +0,0 @@ -#include "ds2_dma.h" - - - -//register a DMA transfer request -//ch: channel id request, there are 6 channles, -//irq_handler: the DMA interruption handle -//arg: argument to the handle -//mode: DMA mode, such as port width, address increased/fixed, and so on -//type: DMA request type -extern int dma_request(int ch, void (*irq_handler)(unsigned int), unsigned int arg, - unsigned int mode, unsigned int type); - -//start DMA transfer, must request a DMA first -//ch: channel id -//srcAddr: DMA source address -//dstAddr: DMA destination address -//count: DMA transfer count, the total bytes due the mode in dma_request -extern void dma_start(int ch, unsigned int srcAddr, unsigned int dstAddr, - unsigned int count); - - -int _dmaCopy(int ch, void *dest, void *src, unsigned int size, unsigned int flags){ - int test = 0; - if(!(test = dma_request(ch, 0, 0, - //increment dest addr - DMAC_DCMD_DAI | flags, - //auto request type - DMAC_DRSR_RS_AUTO))) - { - dma_start(ch, (unsigned int)src, (unsigned int)dest, size); - } - return test; -} diff --git a/sdk-modifications/libsrc/core/ds2_dma.h b/sdk-modifications/libsrc/core/ds2_dma.h deleted file mode 100644 index 9a306cf..0000000 --- a/sdk-modifications/libsrc/core/ds2_dma.h +++ /dev/null @@ -1,142 +0,0 @@ -#ifndef _DS2_DMA_H__ -#define _DS2_DMA_H__ - -#ifdef __cplusplus -extern "C" { -#endif - - -#define MAX_DMA_NUM 6 /* max 6 channels */ - - -// DMA request source register -#define DMAC_DRSR_RS_BIT 0 -#define DMAC_DRSR_RS_AUTO (8 << DMAC_DRSR_RS_BIT) - - -// DMA channel command register -#define DMAC_DCMD_SAI (1 << 23) /* source address increment */ -#define DMAC_DCMD_DAI (1 << 22) /* dest address increment */ - -#define DMAC_DCMD_SWDH_BIT 14 /* source port width */ -#define DMAC_DCMD_SWDH_32 (0 << DMAC_DCMD_SWDH_BIT) -#define DMAC_DCMD_SWDH_8 (1 << DMAC_DCMD_SWDH_BIT) -#define DMAC_DCMD_SWDH_16 (2 << DMAC_DCMD_SWDH_BIT) - -#define DMAC_DCMD_DWDH_BIT 12 /* dest port width */ -#define DMAC_DCMD_DWDH_32 (0 << DMAC_DCMD_DWDH_BIT) -#define DMAC_DCMD_DWDH_8 (1 << DMAC_DCMD_DWDH_BIT) - #define DMAC_DCMD_DWDH_16 (2 << DMAC_DCMD_DWDH_BIT) - -#define DMAC_DCMD_DS_BIT 8 /* transfer data size of a data unit */ -#define DMAC_DCMD_DS_32BIT (0 << DMAC_DCMD_DS_BIT) -#define DMAC_DCMD_DS_8BIT (1 << DMAC_DCMD_DS_BIT) -#define DMAC_DCMD_DS_16BIT (2 << DMAC_DCMD_DS_BIT) -#define DMAC_DCMD_DS_16BYTE (3 << DMAC_DCMD_DS_BIT) -#define DMAC_DCMD_DS_32BYTE (4 << DMAC_DCMD_DS_BIT) - -#define DMAC_DCMD_TM (1 << 7) /* transfer mode: 0-single 1-block */ - - -//detect if channel has completed job -#define DMAC_DCCSR_TT (1 << 3) /* transfer terminated */ -#define DMAC_BASE 0xB3020000 -#define REG32(addr) *((volatile u32 *)(addr)) -#define DMAC_DCCSR(n) (DMAC_BASE + (0x10 + (n) * 0x20)) /* DMA control/status */ -#define REG_DMAC_DCCSR(n) REG32(DMAC_DCCSR((n))) - -#define ds2_DMA_isBusy(n) \ - !( REG_DMAC_DCCSR((n)) & DMAC_DCCSR_TT ) - - -/* -Copy modes - -*/ - -#define DMA_MODE32BYTE DMAC_DCMD_SWDH_32 | DMAC_DCMD_DWDH_32 | \ - DMAC_DCMD_DS_32BYTE | DMAC_DCMD_TM - -#define DMA_MODE16BYTE DMAC_DCMD_SWDH_16 | DMAC_DCMD_DWDH_16 | \ - DMAC_DCMD_DS_16BYTE | DMAC_DCMD_TM - -#define DMA_MODE32BIT DMAC_DCMD_SWDH_32 | DMAC_DCMD_DWDH_32 | \ - DMAC_DCMD_DS_32BIT - -#define DMA_MODE16BIT DMAC_DCMD_SWDH_16 | DMAC_DCMD_DWDH_16 | \ - DMAC_DCMD_DS_16BIT - -#define DMA_MODE8BIT DMAC_DCMD_SWDH_8 | DMAC_DCMD_DWDH_8 | \ - DMAC_DCMD_DS_8BIT | DMAC_DCMD_TM - -#define DMA_MODECOPY DMAC_DCMD_SAI - - - -extern int _dmaCopy(int ch, void *dest, void *src, unsigned int size, unsigned int flags); - -/* - * Copy 'size' bytes from src to dest, in blocks of 32 bytes. - * size is in bytes and must be a multiple of 32. - * Both src and dest must be aligned to 32 bytes. - * Returns 0 on failure, non-zero on success. - */ -#define ds2_DMAcopy_32Byte(ch, dest, src, size)\ - _dmaCopy(ch, dest, src, size, DMA_MODECOPY | DMA_MODE32BYTE) - -/* - * Copy 'size' bytes from src to dest, in blocks of 16 bytes. - * size is in bytes and must be a multiple of 16. - * Both src and dest must be aligned to 16 bytes. - * Returns 0 on failure, non-zero on success. - */ -#define ds2_DMAcopy_16Byte(ch, dest, src, size)\ - _dmaCopy(ch, dest, src, size, DMA_MODECOPY | DMA_MODE16BYTE); - -/* - * Copy 'size' bytes from src to dest, in blocks of 32 bits (4 bytes). - * size is in bytes and must be a multiple of 4. - * Both src and dest must be aligned to 32 bits (4 bytes). - * Returns 0 on failure, non-zero on success. - */ -#define ds2_DMAcopy_32Bit(ch, dest, src, size)\ - _dmaCopy(ch, dest, src, size, DMA_MODECOPY | DMA_MODE32BIT); - -/* - * Copy 'size' bytes from src to dest, in blocks of 16 bits (2 bytes). - * size is in bytes and must be a multiple of 2. - * Both src and dest must be aligned to 16 bits (2 bytes). - * Returns 0 on failure, non-zero on success. - */ -#define ds2_DMAcopy_16Bit(ch, dest, src, size)\ - _dmaCopy(ch, dest, src, size, DMA_MODECOPY | DMA_MODE16BIT) - -/* - * Copy 'size' individual bytes (8 bits at a time) from src to dest. - * Returns 0 on failure, non-zero on success. - */ -#define ds2_DMAcopy_8Bit(ch, dest, src, size)\ - _dmaCopy(ch, dest, src, size, DMA_MODECOPY | DMA_MODE8BIT) - - - -//Stop DMA transfer -extern void dma_stop(int ch); - -#define ds2_DMA_stop(ch)\ - dma_stop(ch) - -//Wait DMA transfer over -extern int dma_wait_finish(int ch); - -#define ds2_DMA_wait(ch)\ - dma_wait_finish(ch) - - - -#ifdef __cplusplus -} -#endif - -#endif //__DMA_H__ - diff --git a/sdk-modifications/libsrc/fs/bit_ops.h b/sdk-modifications/libsrc/fs/bit_ops.h deleted file mode 100755 index f823db7..0000000 --- a/sdk-modifications/libsrc/fs/bit_ops.h +++ /dev/null @@ -1,58 +0,0 @@ -/* - bit_ops.h - Functions for dealing with conversion of data between types - - Copyright (c) 2006 Michael "Chishm" Chisholm - - Redistribution and use in source and binary forms, with or without modification, - are permitted provided that the following conditions are met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - 2. Redistributions in binary form must reproduce the above copyright notice, - this list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. - 3. The name of the author may not be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED - WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY - AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - - 2006-07-11 - Chishm - * Original release -*/ - -#ifndef _BIT_OPS_H -#define _BIT_OPS_H - -/*----------------------------------------------------------------- -Functions to deal with little endian values stored in u8 arrays ------------------------------------------------------------------*/ -static inline u16 u8array_to_u16 (const u8* item, int offset) { - return ( item[offset] | (item[offset + 1] << 8)); -} - -static inline u32 u8array_to_u32 (const u8* item, int offset) { - return ( item[offset] | (item[offset + 1] << 8) | (item[offset + 2] << 16) | (item[offset + 3] << 24)); -} - -static inline void u16_to_u8array (u8* item, int offset, u16 value) { - item[offset] = (u8)value; - item[offset + 1] = (u8)(value >> 8); -} - -static inline void u32_to_u8array (u8* item, int offset, u32 value) { - item[offset] = (u8)value; - item[offset + 1] = (u8)(value >> 8); - item[offset + 2] = (u8)(value >> 16); - item[offset + 3] = (u8)(value >> 24); -} - -#endif // _BIT_OPS_H diff --git a/sdk-modifications/libsrc/fs/cache.c b/sdk-modifications/libsrc/fs/cache.c deleted file mode 100755 index 2c66e1f..0000000 --- a/sdk-modifications/libsrc/fs/cache.c +++ /dev/null @@ -1,273 +0,0 @@ -/* - cache.c - The cache is not visible to the user. It should be flushed - when any file is closed or changes are made to the filesystem. - - This cache implements a least-used-page replacement policy. This will - distribute sectors evenly over the pages, so if less than the maximum - pages are used at once, they should all eventually remain in the cache. - This also has the benefit of throwing out old sectors, so as not to keep - too many stale pages around. - - Copyright (c) 2006 Michael "Chishm" Chisholm - - Redistribution and use in source and binary forms, with or without modification, - are permitted provided that the following conditions are met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - 2. Redistributions in binary form must reproduce the above copyright notice, - this list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. - 3. The name of the author may not be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED - WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY - AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -*/ - -#include <string.h> - -#include "fs_common.h" -#include "fs_cache.h" -#include "disc_io/disc.h" - -#include "mem_allocate.h" - -#define CACHE_FREE 0xFFFFFFFF - -CACHE* _FAT_cache_constructor (u32 numberOfPages, const IO_INTERFACE* discInterface) { - CACHE* cache; - u32 i; - CACHE_ENTRY* cacheEntries; - - if (numberOfPages < 2) { - numberOfPages = 2; - } - - cache = (CACHE*) _FAT_mem_allocate (sizeof(CACHE)); - if (cache == NULL) { - return NULL; - } - - cache->disc = discInterface; - cache->numberOfPages = numberOfPages; - - - cacheEntries = (CACHE_ENTRY*) _FAT_mem_allocate ( sizeof(CACHE_ENTRY) * numberOfPages); - if (cacheEntries == NULL) { - _FAT_mem_free (cache); - return NULL; - } - - for (i = 0; i < numberOfPages; i++) { - cacheEntries[i].sector = CACHE_FREE; - cacheEntries[i].count = 0; - cacheEntries[i].dirty = 0; - } - - cache->cacheEntries = cacheEntries; - - cache->pages = (u8*) _FAT_mem_allocate ( CACHE_PAGE_SIZE * numberOfPages); - if (cache->pages == NULL) { - _FAT_mem_free (cache->cacheEntries); - _FAT_mem_free (cache); - return NULL; - } - - return cache; -} - -void _FAT_cache_destructor (CACHE* cache) { - // Clear out cache before destroying it - _FAT_cache_flush(cache); - - // Free memory in reverse allocation order - _FAT_mem_free (cache->pages); - _FAT_mem_free (cache->cacheEntries); - _FAT_mem_free (cache); - - return; -} - -/* -Retrieve a sector's page from the cache. If it is not found in the cache, -load it into the cache and return the page it was loaded to. -Return CACHE_FREE on error. -*/ -static u32 _FAT_cache_getSector (CACHE* cache, u32 sector) { - u32 i; - CACHE_ENTRY* cacheEntries = cache->cacheEntries; - u32 numberOfPages = cache->numberOfPages; - - u32 leastUsed = 0; - u32 lowestCount = 0xFFFFFFFF; - - for (i = 0; (i < numberOfPages) && (cacheEntries[i].sector != sector); i++) { - // While searching for the desired sector, also search for the leased used page - if ( (cacheEntries[i].sector == CACHE_FREE) || (cacheEntries[i].count < lowestCount) ) { - leastUsed = i; - lowestCount = cacheEntries[i].count; - } - } - - // If it found the sector in the cache, return it - if ((i < numberOfPages) && (cacheEntries[i].sector == sector)) { - // Increment usage counter - cacheEntries[i].count += 1; - return i; - } - - // If it didn't, replace the least used cache page with the desired sector - if ((cacheEntries[leastUsed].sector != CACHE_FREE) && (0xC33CA55A == cacheEntries[leastUsed].dirty)) { - // Write the page back to disc if it has been written to - if (!_FAT_disc_writeSectors (cache->disc, cacheEntries[leastUsed].sector, 1, cache->pages + CACHE_PAGE_SIZE * leastUsed)) { - return CACHE_FREE; - } - cacheEntries[leastUsed].dirty = 0; - } - - // Load the new sector into the cache - if (!_FAT_disc_readSectors (cache->disc, sector, 1, cache->pages + CACHE_PAGE_SIZE * leastUsed)) { - return CACHE_FREE; - } - cacheEntries[leastUsed].sector = sector; - // Increment the usage count, don't reset it - // This creates a paging policy of least used PAGE, not sector - cacheEntries[leastUsed].count += 1; - return leastUsed; -} - -/* -Reads some data from a cache page, determined by the sector number -*/ -bool _FAT_cache_readPartialSector (CACHE* cache, void* buffer, u32 sector, u32 offset, u32 size) { - u32 page; - - if (offset + size > BYTES_PER_READ) { - return false; - } - - page = _FAT_cache_getSector (cache, sector); - if (page == CACHE_FREE) { - return false; - } - - memcpy (buffer, cache->pages + (CACHE_PAGE_SIZE * page) + offset, size); - return true; -} - -/* -Writes some data to a cache page, making sure it is loaded into memory first. -*/ -bool _FAT_cache_writePartialSector (CACHE* cache, const void* buffer, u32 sector, u32 offset, u32 size) { - u32 page; - - if (offset + size > BYTES_PER_READ) { - return false; - } - - page = _FAT_cache_getSector (cache, sector); - if (page == CACHE_FREE) { - return false; - } - - memcpy (cache->pages + (CACHE_PAGE_SIZE * page) + offset, buffer, size); - cache->cacheEntries[page].dirty = 0xC33CA55A; - - return true; -} - -/* -some where call _FAT_cache_writePartialSector to cache sector m , but later, another -place(in fwrite function) directly write data to sector m, in this case, need to -cancel the dirty state of sector m -*/ -void _FAT_cache_writePartialSector_check (CACHE* cache, u32 sector, u32 num, const void* buffer) -{ - u32 i, m; - CACHE_ENTRY* cacheEntries = cache->cacheEntries; - u32 numberOfPages = cache->numberOfPages; - - m = 0; - while(m++ < num) - { - for (i = 0; i < numberOfPages; i++) - { - if(cacheEntries[i].sector == sector) - break; - } - - if(i >= numberOfPages) - return; - - //cache the data - memcpy (cache->pages + (CACHE_PAGE_SIZE * i), buffer, CACHE_PAGE_SIZE); - //cancel the dirty state - cache->cacheEntries[i].dirty = 0; - - sector += 1; - buffer += CACHE_PAGE_SIZE; - } -} - -/* -Writes some data to a cache page, zeroing out the page first -*/ -bool _FAT_cache_eraseWritePartialSector (CACHE* cache, const void* buffer, u32 sector, u32 offset, u32 size) { - u32 page; - - if (offset + size > BYTES_PER_READ) { - return false; - } - - page = _FAT_cache_getSector (cache, sector); - if (page == CACHE_FREE) { - return false; - } - - memset (cache->pages + (CACHE_PAGE_SIZE * page), 0, CACHE_PAGE_SIZE); - memcpy (cache->pages + (CACHE_PAGE_SIZE * page) + offset, buffer, size); - cache->cacheEntries[page].dirty = 0xC33CA55A; - - return true; -} - - -/* -Flushes all dirty pages to disc, clearing the dirty flag. -Also resets all pages' page count to 0. -*/ -bool _FAT_cache_flush (CACHE* cache) { - u32 i; - - for (i = 0; i < cache->numberOfPages; i++) { - if (0xC33CA55A == cache->cacheEntries[i].dirty) { - if (!_FAT_disc_writeSectors (cache->disc, cache->cacheEntries[i].sector, 1, cache->pages + CACHE_PAGE_SIZE * i)) { - return CACHE_FREE; - } - } - cache->cacheEntries[i].count = 0; - cache->cacheEntries[i].dirty = 0; - } - - _FAT_disc_clearStatus( cache->disc ); - return true; -} - -void _FAT_cache_invalidate (CACHE* cache) { - int i; - for (i = 0; i < cache->numberOfPages; i++) { - cache->cacheEntries[i].sector = CACHE_FREE; - cache->cacheEntries[i].count = 0; - cache->cacheEntries[i].dirty = 0; - } -} - diff --git a/sdk-modifications/libsrc/fs/directory.c b/sdk-modifications/libsrc/fs/directory.c deleted file mode 100755 index 124daf8..0000000 --- a/sdk-modifications/libsrc/fs/directory.c +++ /dev/null @@ -1,1035 +0,0 @@ -/*
- directory.c
- Reading, writing and manipulation of the directory structure on
- a FAT partition
-
- Copyright (c) 2006 Michael "Chishm" Chisholm
-
- Redistribution and use in source and binary forms, with or without modification,
- are permitted provided that the following conditions are met:
-
- 1. Redistributions of source code must retain the above copyright notice,
- this list of conditions and the following disclaimer.
- 2. Redistributions in binary form must reproduce the above copyright notice,
- this list of conditions and the following disclaimer in the documentation and/or
- other materials provided with the distribution.
- 3. The name of the author may not be used to endorse or promote products derived
- from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
- WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
- EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
- 2006-08-14 - Chishm
- * entryFromPath correctly finds "" and "." now
-
- 2006-08-17 - Chishm
- * entryFromPath doesn't look for "" anymore - use "." to refer to the current directory
-
- 2006-08-19 - Chishm
- * Fixed entryFromPath bug when looking for "." in root directory
-
- 2006-10-01 - Chishm
- * Now clears the whole new cluster when linking in more clusters for a directory
-
- 2006-10-28 - Chishm
- * stat returns the hostType for the st_dev value
-*/
-//version 1.1
-//Note: fix bug in _FAT_directory_isValidAlias()
-
-#include <string.h>
-#include <ctype.h>
-
-#include "directory.h"
-#include "fs_common.h"
-#include "partition.h"
-#include "file_allocation_table.h"
-#include "bit_ops.h"
-#include "filetime.h"
-#include "fs_unicode.h"
-
-// Directory entry codes
-#define DIR_ENTRY_LAST 0x00
-#define DIR_ENTRY_FREE 0xE5
-
-
-// Long file name directory entry
-enum LFN_offset {
- LFN_offset_ordinal = 0x00, // Position within LFN
- LFN_offset_char0 = 0x01,
- LFN_offset_char1 = 0x03,
- LFN_offset_char2 = 0x05,
- LFN_offset_char3 = 0x07,
- LFN_offset_char4 = 0x09,
- LFN_offset_flag = 0x0B, // Should be equal to ATTRIB_LFN
- LFN_offset_reserved1 = 0x0C, // Always 0x00
- LFN_offset_checkSum = 0x0D, // Checksum of short file name (alias)
- LFN_offset_char5 = 0x0E,
- LFN_offset_char6 = 0x10,
- LFN_offset_char7 = 0x12,
- LFN_offset_char8 = 0x14,
- LFN_offset_char9 = 0x16,
- LFN_offset_char10 = 0x18,
- LFN_offset_reserved2 = 0x1A, // Always 0x0000
- LFN_offset_char11 = 0x1C,
- LFN_offset_char12 = 0x1E
-};
-const int LFN_offset_table[13]={0x01,0x03,0x05,0x07,0x09,0x0E,0x10,0x12,0x14,0x16,0x18,0x1C,0x1E};
-
-#define LFN_END 0x40
-#define LFN_DEL 0x80
-
-static char* strupr(char* a)
-{
- char *str;
-
- str = a;
- while(*str)
- {
- if(*str >= 'a' && *str <= 'z') *str -= 0x20;
- str += 1;
- }
-
- return a;
-}
-
-static char* strlwr(char *a){
- char *str;
-
- str = a;
- while(*str)
- {
- if((*str) >= 'A' && (*str) <= 'Z') (*str) = ((*str) -'A' + 'a');
- str++;
- }
- return a;
-}
-
-bool _FAT_directory_isValidLfn (const char* name) {
- u32 i;
- u32 nameLength;
- // Make sure the name is short enough to be valid
- if ( strnlen(name, MAX_FILENAME_LENGTH) >= MAX_FILENAME_LENGTH) {
- return false;
- }
- // Make sure it doesn't contain any invalid characters
- if (strpbrk (name, "\\/:*?\"<>|") != NULL) {
- return false;
- }
-
- nameLength = strnlen(name, MAX_FILENAME_LENGTH);
- // Make sure the name doesn't contain any control codes
- for (i = 0; i < nameLength; i++) {
- if ((unsigned char)name[i] < 0x20) {
- return false;
- }
- }
- // Otherwise it is valid
- return true;
-}
-bool _FAT_directory_isValidAlias (const char* name) {
- //return false;//disables this function to preserve file name casing
-
- u32 i;
- u32 nameLength;
- const char* dot;
-
- // Make sure the name is short enough to be valid
- if ( strnlen(name, MAX_ALIAS_LENGTH) >= MAX_ALIAS_LENGTH) {
- return false;
- }
- // Make sure it doesn't contain any invalid characters
- if (strpbrk (name, "\\/:;*?\"<>|&+,=[]") != NULL) {
- return false;
- }
-
- //
- if (strpbrk (name, " ") != NULL) {
- return false;
- }
-
- nameLength = strnlen(name, MAX_ALIAS_LENGTH);
- // Make sure the name doesn't contain any control codes
- //if name isn't all capitals, then it is not a valid short name
- for (i = 0; i < nameLength; i++) {
- if (name[i] > 0x5A && name[i]!= 0x20) {
- return false;
- }
- }
-
- dot = strchr ( name, '.');
- // Make sure there is only one '.'
- if ((dot != NULL) && (strrchr ( name, '.') != dot)) {
- return false;
- }
- // If there is a '.':
- if (dot != NULL) {
- // Make sure the filename portion is 1-8 characters long
- if (((dot - 1 - name) > 8) || ((dot - 1 - name) < 1)) {
- return false;
- }
- // Make sure the extension is 1-3 characters long, if it exists
- if ((strnlen(dot + 1, MAX_ALIAS_LENGTH) > 3) || (strnlen(dot + 1, MAX_ALIAS_LENGTH) < 1)) {
- return false;
- }
- } else {
- // Make sure the entire file name is 1-8 characters long
- if ((nameLength > 8) || (nameLength < 1)) {
- return false;
- }
- }
-
- // Since we made it through all those tests, it must be valid
- return true;
-}
-
-static bool _FAT_directory_entryGetAlias (const u8* entryData, char* destName) {
- int i=0;
- int j=0;
-
- destName[0] = '\0';
- if (entryData[0] != DIR_ENTRY_FREE) {
- if (entryData[0] == '.') {
- destName[0] = '.';
- if (entryData[1] == '.') {
- destName[1] = '.';
- destName[2] = '\0';
- } else {
- destName[1] = '\0';
- }
- } else {
- // Copy the filename from the dirEntry to the string
- for (i = 0; (i < 8) && (entryData[DIR_ENTRY_name + i] != ' '); i++) {
- destName[i] = entryData[DIR_ENTRY_name + i];
- }
- // Copy the extension from the dirEntry to the string
- if (entryData[DIR_ENTRY_extension] != ' ') {
- destName[i++] = '.';
- for ( j = 0; (j < 3) && (entryData[DIR_ENTRY_extension + j] != ' '); j++) {
- destName[i++] = entryData[DIR_ENTRY_extension + j];
- }
- }
- destName[i] = '\0';
- }
- }
-
- return (destName[0] != '\0');
-}
-
-u32 _FAT_directory_entryGetCluster (const u8* entryData) {
- return u8array_to_u16(entryData,DIR_ENTRY_cluster) | (u8array_to_u16(entryData, DIR_ENTRY_clusterHigh) << 16);
-}
-
-static bool _FAT_directory_incrementDirEntryPosition (PARTITION* partition, DIR_ENTRY_POSITION* entryPosition, bool extendDirectory) {
- DIR_ENTRY_POSITION position;
- position = *entryPosition;
- u32 tempCluster;
-
- // Increment offset, wrapping at the end of a sector
- ++ position.offset;
- if (position.offset == BYTES_PER_READ / DIR_ENTRY_DATA_SIZE) {
- position.offset = 0;
- // Increment sector when wrapping
- ++ position.sector;
- // But wrap at the end of a cluster
- if ((position.sector == partition->sectorsPerCluster) && (position.cluster != FAT16_ROOT_DIR_CLUSTER)) {
- position.sector = 0;
- // Move onto the next cluster, making sure there is another cluster to go to
- tempCluster = _FAT_fat_nextCluster(partition, position.cluster);
- if (tempCluster == CLUSTER_EOF) {
- if (extendDirectory) {
- tempCluster = _FAT_fat_linkFreeClusterCleared (partition, position.cluster);
- if (tempCluster == CLUSTER_FREE) {
- return false; // This will only happen if the disc is full
- }
- } else {
- return false; // Got to the end of the directory, not extending it
- }
- }
- position.cluster = tempCluster;
- } else if ((position.cluster == FAT16_ROOT_DIR_CLUSTER) && (position.sector == (partition->dataStart - partition->rootDirStart))) {
- return false; // Got to end of root directory, can't extend it
- }
- }
- *entryPosition = position;
- return true;
-}
-
-bool _FAT_directory_getNextEntry (PARTITION* partition, DIR_ENTRY* entry) {
- DIR_ENTRY_POSITION entryStart;
- DIR_ENTRY_POSITION entryEnd;
-
- u8 entryData[0x20];
-
- bool notFound, found;
- u32 maxSectors;
- int lfnPos;
- u8 lfnChkSum, chkSum;
- char* filename;
- u16 unicodeFilename[256];
- bool lfnExists;
-
- int i;
-
- lfnChkSum = 0;
-
- entryStart = entry->dataEnd;
-
- // Make sure we are using the correct root directory, in case of FAT32
- if (entryStart.cluster == FAT16_ROOT_DIR_CLUSTER) {
- entryStart.cluster = partition->rootDirCluster;
- }
-
- entryEnd = entryStart;
- filename = entry->d_name;
- //unicodeFilename = entry->unicodeFilename;
- memset( unicodeFilename, 0, 512 );
-
- // Can only be FAT16_ROOT_DIR_CLUSTER if it is the root directory on a FAT12 or FAT16 partition
- if (entryStart.cluster == FAT16_ROOT_DIR_CLUSTER) {
- maxSectors = partition->dataStart - partition->rootDirStart;
- } else {
- maxSectors = partition->sectorsPerCluster;
- }
-
- lfnExists = false;
-
- found = false;
- notFound = false;
-
- while (!found && !notFound) {
- if (_FAT_directory_incrementDirEntryPosition (partition, &entryEnd, false) == false) {
- notFound = true;
- }
-
- _FAT_cache_readPartialSector (partition->cache, entryData, _FAT_fat_clusterToSector(partition, entryEnd.cluster) + entryEnd.sector, entryEnd.offset * DIR_ENTRY_DATA_SIZE, DIR_ENTRY_DATA_SIZE);
-
- if (entryData[DIR_ENTRY_attributes] == ATTRIB_LFN) {
- // It's an LFN
- if (entryData[LFN_offset_ordinal] & LFN_DEL) {
- lfnExists = false;
- } else if (entryData[LFN_offset_ordinal] & LFN_END) {
- // Last part of LFN, make sure it isn't deleted using previous if(Thanks MoonLight)
- entryStart = entryEnd; // This is the start of a directory entry
- lfnExists = true;
- //filename[(entryData[LFN_offset_ordinal] & ~LFN_END) * 13] = '\0'; // Set end of lfn to null character
- unicodeFilename[(entryData[LFN_offset_ordinal] & ~LFN_END) * 13] = 0x0000;
- lfnChkSum = entryData[LFN_offset_checkSum];
- } if (lfnChkSum != entryData[LFN_offset_checkSum]) {
- lfnExists = false;
- }
- //unicodeFilename[0] = 0x0000;
- if (lfnExists) {
- lfnPos = ((entryData[LFN_offset_ordinal] & ~LFN_END) - 1) * 13;
- for (i = 0; i < 13; i++) {
- unicodeFilename[lfnPos + i] = u8array_to_u16( entryData, LFN_offset_table[i]);
- // | entryData[LFN_offset_table[i]+1]<<8; // modify this for unicode support;
- }
- }
- } else if (entryData[DIR_ENTRY_attributes] & ATTRIB_VOL) {
- // This is a volume name, don't bother with it
- } else if (entryData[0] == DIR_ENTRY_LAST) {
- notFound = true;
- } else if ((entryData[0] != DIR_ENTRY_FREE) && (entryData[0] > 0x20) && !(entryData[DIR_ENTRY_attributes] & ATTRIB_VOL)) {
- if (lfnExists) {
- // Calculate file checksum
- chkSum = 0;
- for (i=0; i < 11; i++) {
- // NOTE: The operation is an unsigned char rotate right
- chkSum = ((chkSum & 1) ? 0x80 : 0) + (chkSum >> 1) + entryData[i];
- }
- if (chkSum != lfnChkSum) {
- lfnExists = false;
- //filename[0] = '\0';
- //unicodeFilename[0] = 0x0000; // move this line to below(1)
- }
- }
- //short name
- if (!lfnExists) {
- entryStart = entryEnd;
- unicodeFilename[0] = 0x0000; // (1)make sure clear previous search junk
- // get alias anyway
- _FAT_directory_entryGetAlias (entryData, filename);
- strlwr(filename);//convert to lowercase characters
- }
- //long name
- else
- {
- _FAT_unicode16_to_utf8 (unicodeFilename, filename);
- }
-
- found = true;
- }
- }
-
- // If no file is found, return false
- if (notFound) {
- return false;
- } else {
- // Fill in the directory entry struct
- entry->dataStart = entryStart;
- entry->dataEnd = entryEnd;
- memcpy (entry->entryData, entryData, DIR_ENTRY_DATA_SIZE);
- return true;
- }
-}
-
-bool _FAT_directory_getFirstEntry (PARTITION* partition, DIR_ENTRY* entry, u32 dirCluster) {
- entry->dataStart.cluster = dirCluster;
- entry->dataStart.sector = 0;
- entry->dataStart.offset = -1; // Start before the beginning of the directory
-
- entry->dataEnd = entry->dataStart;
-
- return _FAT_directory_getNextEntry (partition, entry);
-}
-
-bool _FAT_directory_getRootEntry (PARTITION* partition, DIR_ENTRY* entry) {
- entry->dataStart.cluster = 0;
- entry->dataStart.sector = 0;
- entry->dataStart.offset = 0;
-
- entry->dataEnd = entry->dataStart;
-
- memset (entry->d_name, '\0', MAX_FILENAME_LENGTH);
- entry->d_name[0] = '.';
-
- memset (entry->entryData, 0, DIR_ENTRY_DATA_SIZE);
- memset (entry->entryData, ' ', 11);
- entry->entryData[0] = '.';
-
- entry->entryData[DIR_ENTRY_attributes] = ATTRIB_DIR;
-
- u16_to_u8array (entry->entryData, DIR_ENTRY_cluster, partition->rootDirCluster);
- u16_to_u8array (entry->entryData, DIR_ENTRY_clusterHigh, partition->rootDirCluster >> 16);
-
- return true;
-}
-
-bool _FAT_directory_entryFromPosition (PARTITION* partition, DIR_ENTRY* entry) {
- DIR_ENTRY_POSITION entryStart;
- DIR_ENTRY_POSITION entryEnd;
- entryStart = entry->dataStart;
- entryEnd = entry->dataEnd;
- bool entryStillValid;
- bool finished;
-
- int i;
- int lfnPos;
-
- u8 entryData[DIR_ENTRY_DATA_SIZE];
-
- memset (entry->d_name, '\0', MAX_FILENAME_LENGTH);
-
- // Create an empty directory entry to overwrite the old ones with
- for ( entryStillValid = true, finished = false;
- entryStillValid && !finished;
- entryStillValid = _FAT_directory_incrementDirEntryPosition (partition, &entryStart, false))
- {
- _FAT_cache_readPartialSector (partition->cache, entryData,
- _FAT_fat_clusterToSector(partition, entryStart.cluster) + entryStart.sector,
- entryStart.offset * DIR_ENTRY_DATA_SIZE, DIR_ENTRY_DATA_SIZE);
-
- if ((entryStart.cluster == entryEnd.cluster)
- && (entryStart.sector == entryEnd.sector)
- && (entryStart.offset == entryEnd.offset)) {
- // Copy the entry data and stop, since this is the last section of the directory entry
- memcpy (entry->entryData, entryData, DIR_ENTRY_DATA_SIZE);
- finished = true;
- } else {
- // Copy the long file name data
- lfnPos = ((entryData[LFN_offset_ordinal] & ~LFN_END) - 1) * 13;
- for (i = 0; i < 13; i++) {
- entry->d_name[lfnPos + i] = entryData[LFN_offset_table[i]]; // modify this for unicode support;
- }
- }
- }
-
- if (!entryStillValid) {
- return false;
- }
-
- if ((entryStart.cluster == entryEnd.cluster)
- && (entryStart.sector == entryEnd.sector)
- && (entryStart.offset == entryEnd.offset)) {
- // Since the entry doesn't have a long file name, extract the short filename
- if (!_FAT_directory_entryGetAlias (entry->entryData, entry->d_name)) {
- return false;
- }
- }
-
- return true;
-}
-
-bool _FAT_directory_entryFromPath (PARTITION* partition, DIR_ENTRY* entry, const char* path, const char* pathEnd) {
- size_t dirnameLength;
- const char* pathPosition;
- const char* nextPathPosition;
-
- //size_t uniDirnameLength;
- //u16 uniPath[MAX_FILENAME_LENGTH];
- //const u16 * uniPathPosition;
- //const u16 * uniNextPathPosition;
-
- u32 dirCluster;
- bool foundFile;
-
- //char alias[MAX_ALIAS_LENGTH];
-
- bool found, notFound;
-
- //_FAT_utf8_to_unicode16( path, uniPath );
- pathPosition = path;
- //uniPathPosition = uniPath;
-
- found = false;
- notFound = false;
-
- if (pathEnd == NULL) {
- // Set pathEnd to the end of the path string
- pathEnd = strchr (path, '\0');
- }
-
- if (pathPosition[0] == DIR_SEPARATOR) {
- // Start at root directory
- dirCluster = partition->rootDirCluster;
- // Consume separator(s)
- while (pathPosition[0] == DIR_SEPARATOR) {
- pathPosition++;
- }
-
- //while (uniPathPosition[0] == (unsigned short)DIR_SEPARATOR) {
- // uniPathPosition++;
- //}
-
- if (pathPosition >= pathEnd) {
- _FAT_directory_getRootEntry (partition, entry);
- found = true;
- }
- } else {
- // Start in current working directory
- dirCluster = partition->cwdCluster;
- }
-
- // If the path is only specifying a directory in the form "."
- // and this is the root directory, return it
- //if ((dirCluster == partition->rootDirCluster) && (strncasecmp(".", pathPosition, 2) == 0)) {
- if ((dirCluster == partition->rootDirCluster) && strlen(pathPosition) == 1 && (strcasecmp(".", pathPosition) == 0)) {
- _FAT_directory_getRootEntry (partition, entry);
- found = true;
- }
-
- while (!found && !notFound) {
- // Get the name of the next required subdirectory within the path
- nextPathPosition = strchr (pathPosition, DIR_SEPARATOR);
- //uniNextPathPosition = _unistrchr( uniPathPosition, (unsigned short)DIR_SEPARATOR );
- if (nextPathPosition != NULL) {
- dirnameLength = nextPathPosition - pathPosition;
- } else {
- dirnameLength = strlen(pathPosition);
- }
- //if (uniNextPathPosition != 0x0000) {
- // uniDirnameLength = uniNextPathPosition - uniPathPosition;
- //} else {
- // uniDirnameLength = _unistrnlen(uniPathPosition, MAX_FILENAME_LENGTH);
- //}
-
- if (dirnameLength > MAX_FILENAME_LENGTH) {
- // The path is too long to bother with
- return false;
- }
- //if( uniDirnameLength > MAX_FILENAME_LENGTH ) {
- // return false;
- //}
-
- // Look for the directory within the path
- foundFile = _FAT_directory_getFirstEntry (partition, entry, dirCluster);
-
- while (foundFile && !found && !notFound) { // It hasn't already found the file
- // Check if the filename matches
- //if ((uniDirnameLength == _unistrnlen(entry->unicodeFilename, MAX_FILENAME_LENGTH))
- // && (_unistrncmp(entry->unicodeFilename, uniPathPosition, uniDirnameLength) == 0)) {
- // found = true;
- //}
-
- //if(!strncasecmp(entry->d_name, pathPosition, dirnameLength))
- if(strlen(entry->d_name) == dirnameLength && !strncasecmp(entry->d_name, pathPosition, dirnameLength))
- found = true;
-
- // Check if the alias matches
- //_FAT_directory_entryGetAlias (entry->entryData, alias);
- //if ((dirnameLength == strnlen(alias, MAX_ALIAS_LENGTH))
- // && (strncasecmp(alias, pathPosition, dirnameLength) == 0)) {
- // found = true;
- //}
-
- if (found && !(entry->entryData[DIR_ENTRY_attributes] & ATTRIB_DIR) && (nextPathPosition != NULL)) {
- // Make sure that we aren't trying to follow a file instead of a directory in the path
- found = false;
- }
-
- if (!found) {
- foundFile = _FAT_directory_getNextEntry (partition, entry);
- }
- }
-
- if (!foundFile) {
- // Check that the search didn't get to the end of the directory
- notFound = true;
- found = false;
- } else if ((nextPathPosition == NULL) || (nextPathPosition >= pathEnd)) {
- // Check that we reached the end of the path
- found = true;
- } else if (entry->entryData[DIR_ENTRY_attributes] & ATTRIB_DIR) {
- dirCluster = _FAT_directory_entryGetCluster (entry->entryData);
- pathPosition = nextPathPosition;
- //uniPathPosition = uniNextPathPosition;
- // Consume separator(s)
- while (pathPosition[0] == DIR_SEPARATOR) {
- pathPosition++;
- }
- //while (uniPathPosition[0] == (unsigned short)DIR_SEPARATOR) {
- // uniPathPosition++;
- //}
- // The requested directory was found
- if (pathPosition >= pathEnd) {
- found = true;
- } else {
- found = false;
- }
- }
- }
-
- if (found && !notFound) {
- return true;
- } else {
- return false;
- }
-}
-
-bool _FAT_directory_removeEntry (PARTITION* partition, DIR_ENTRY* entry) {
- DIR_ENTRY_POSITION entryStart;
- DIR_ENTRY_POSITION entryEnd;
- entryStart = entry->dataStart;
- entryEnd = entry->dataEnd;
- bool entryStillValid;
- bool finished;
-
- u8 entryData[DIR_ENTRY_DATA_SIZE];
-
- // Create an empty directory entry to overwrite the old ones with
- for ( entryStillValid = true, finished = false;
- entryStillValid && !finished;
- entryStillValid = _FAT_directory_incrementDirEntryPosition (partition, &entryStart, false))
- {
- _FAT_cache_readPartialSector (partition->cache, entryData, _FAT_fat_clusterToSector(partition, entryStart.cluster) + entryStart.sector, entryStart.offset * DIR_ENTRY_DATA_SIZE, DIR_ENTRY_DATA_SIZE);
- entryData[0] = DIR_ENTRY_FREE;
- _FAT_cache_writePartialSector (partition->cache, entryData, _FAT_fat_clusterToSector(partition, entryStart.cluster) + entryStart.sector, entryStart.offset * DIR_ENTRY_DATA_SIZE, DIR_ENTRY_DATA_SIZE);
- if ((entryStart.cluster == entryEnd.cluster) && (entryStart.sector == entryEnd.sector) && (entryStart.offset == entryEnd.offset)) {
- finished = true;
- }
- }
-
- if (!entryStillValid) {
- return false;
- }
-
- return true;
-}
-
-static bool _FAT_directory_findEntryGap (PARTITION* partition, DIR_ENTRY* entry, u32 dirCluster, u32 size) {
- DIR_ENTRY_POSITION gapStart;
- DIR_ENTRY_POSITION gapEnd;
-
- u8 entryData[DIR_ENTRY_DATA_SIZE];
-
- u32 dirEntryRemain;
-
- bool endOfDirectory, entryStillValid;
-
- // Scan Dir for free entry
- gapEnd.offset = 0;
- gapEnd.sector = 0;
- gapEnd.cluster = dirCluster;
-
- gapStart = gapEnd;
-
- entryStillValid = true;
- dirEntryRemain = size;
- endOfDirectory = false;
-
- while (entryStillValid && !endOfDirectory && (dirEntryRemain > 0)) {
- _FAT_cache_readPartialSector (partition->cache, entryData, _FAT_fat_clusterToSector(partition, gapEnd.cluster) + gapEnd.sector, gapEnd.offset * DIR_ENTRY_DATA_SIZE, DIR_ENTRY_DATA_SIZE);
- if (entryData[0] == DIR_ENTRY_LAST) {
- gapStart = gapEnd;
- -- dirEntryRemain;
- endOfDirectory = true;
- } else if (entryData[0] == DIR_ENTRY_FREE) {
- if (dirEntryRemain == size) {
- gapStart = gapEnd;
- }
- -- dirEntryRemain;
- } else {
- dirEntryRemain = size;
- }
-
- if (!endOfDirectory && (dirEntryRemain > 0)) {
- entryStillValid = _FAT_directory_incrementDirEntryPosition (partition, &gapEnd, true);
- }
- }
-
- // Make sure the scanning didn't fail
- if (!entryStillValid) {
- return false;
- }
-
- // Save the start entry, since we know it is valid
- entry->dataStart = gapStart;
-
- if (endOfDirectory) {
- memset (entryData, DIR_ENTRY_LAST, DIR_ENTRY_DATA_SIZE);
- dirEntryRemain += 1; // Increase by one to take account of End Of Directory Marker
- while ((dirEntryRemain > 0) && entryStillValid) {
- // Get the gapEnd before incrementing it, so the second to last one is saved
- entry->dataEnd = gapEnd;
- // Increment gapEnd, moving onto the next entry
- entryStillValid = _FAT_directory_incrementDirEntryPosition (partition, &gapEnd, true);
- -- dirEntryRemain;
- // Fill the entry with blanks
- _FAT_cache_writePartialSector (partition->cache, entryData, _FAT_fat_clusterToSector(partition, gapEnd.cluster) + gapEnd.sector, gapEnd.offset * DIR_ENTRY_DATA_SIZE, DIR_ENTRY_DATA_SIZE);
- }
- if (!entryStillValid) {
- return false;
- }
- } else {
- entry->dataEnd = gapEnd;
- }
-
- return true;
-}
-
-static bool _FAT_directory_entryExists (PARTITION* partition, const char* name, u32 dirCluster) {
- DIR_ENTRY tempEntry;
- bool foundFile;
- //char alias[MAX_ALIAS_LENGTH];
- u32 dirnameLength;
- //u16 unicodeName[MAX_FILENAME_LENGTH];
-
- dirnameLength = strnlen(name, MAX_FILENAME_LENGTH);
-
- if (dirnameLength >= MAX_FILENAME_LENGTH) {
- return false;
- }
-
- //_FAT_utf8_to_unicode16( name, unicodeName );
-
- // Make sure the entry doesn't already exist
- foundFile = _FAT_directory_getFirstEntry (partition, &tempEntry, dirCluster);
-
- while (foundFile) { // It hasn't already found the file
- // Check if the filename matches
- //if (/*(dirnameLength == _unistrnlen(tempEntry.unicodeFilename, MAX_FILENAME_LENGTH))*/
- // //&& (strcasecmp(tempEntry.filename, name) == 0)) {
- // /*&&*/ (_unistrncmp( unicodeName, tempEntry.unicodeFilename, MAX_FILENAME_LENGTH ) == 0 ))
- //{
- // return true;
- //}
- //if(!strncasecmp(name, tempEntry.d_name, dirnameLength))
- if(!strcasecmp(name, tempEntry.d_name))
- return true;
-
- // Check if the alias matches
- //_FAT_directory_entryGetAlias (tempEntry.entryData, alias);
- //if ((dirnameLength == strnlen(alias, MAX_ALIAS_LENGTH))
- // && (strcasecmp(alias, name) == 0)) {
- // return true;
- //}
- foundFile = _FAT_directory_getNextEntry (partition, &tempEntry);
- }
- return false;
-}
-
-//a fix for checking if a short file name is already in use.
-static bool _FAT_directory_entryExistsSFN (PARTITION* partition, const char* name, u32 dirCluster) {
- DIR_ENTRY tempEntry;
- bool foundFile;
- char alias[MAX_ALIAS_LENGTH];
- u32 dirnameLength;
-
- dirnameLength = strnlen(name, MAX_FILENAME_LENGTH);
-
- if (dirnameLength >= MAX_FILENAME_LENGTH) {
- return false;
- }
-
-
- // Make sure the entry doesn't already exist
- foundFile = _FAT_directory_getFirstEntry (partition, &tempEntry, dirCluster);
-
- while (foundFile) { // It hasn't already found the file
- if(!strcasecmp(name, tempEntry.d_name))
- return true;
-
- // Check if the alias matches
- _FAT_directory_entryGetAlias (tempEntry.entryData, alias);
- if ((dirnameLength == strnlen(alias, MAX_ALIAS_LENGTH))
- && (strcasecmp(alias, name) == 0)) {
- return true;
- }
- foundFile = _FAT_directory_getNextEntry (partition, &tempEntry);
- }
- return false;
-}
-
-bool _FAT_directory_addEntry (PARTITION* partition, DIR_ENTRY* entry, u32 dirCluster) {
- u32 entrySize;
- u8 lfnEntry[DIR_ENTRY_DATA_SIZE];
- s32 i,j; // Must be signed for use when decrementing in for loop
- char *tmpCharPtr;
- DIR_ENTRY_POSITION curEntryPos;
- bool entryStillValid;
- u8 aliasCheckSum = 0;
- char alias [MAX_ALIAS_LENGTH];
- u16 unicodeFilename[256];
-
- // Make sure the filename is not 0 length
- if (strnlen (entry->d_name, MAX_FILENAME_LENGTH) < 1) {
- return false;
- }
- // Make sure the filename is at least a valid LFN
- if ( !(_FAT_directory_isValidLfn (entry->d_name))) {
- return false;
- }
-
- // Remove trailing spaces
- for (i = strlen (entry->d_name) - 1; (i > 0) && (entry->d_name[i] == ' '); --i) {
- entry->d_name[i] = '\0';
- }
- // Remove leading spaces
- for (i = 0; (i < strlen (entry->d_name)) && (entry->d_name[i] == ' '); ++i) ;
- if (i > 0) {
- memmove (entry->d_name, entry->d_name + i, strlen (entry->d_name + i));
- }
-
- // Remove junk in filename
- i = strlen (entry->d_name);
- memset (entry->d_name + i, '\0', MAX_FILENAME_LENGTH - i);
-
- // Make sure the entry doesn't already exist
- if (_FAT_directory_entryExists (partition, entry->d_name, dirCluster)) {
- return false;
- }
-
- // Clear out alias, so we can generate a new one
- memset (entry->entryData, ' ', 11);
-
- if ( strncmp(entry->d_name, ".", MAX_FILENAME_LENGTH) == 0) {
- // "." entry
- entry->entryData[0] = '.';
- entrySize = 1;
- } else if ( strncmp(entry->d_name, "..", MAX_FILENAME_LENGTH) == 0) {
- // ".." entry
- entry->entryData[0] = '.';
- entry->entryData[1] = '.';
- entrySize = 1;
- }else if (_FAT_directory_isValidAlias (entry->d_name)) {
- entrySize = 1;
- // Copy into alias
- for (i = 0, j = 0; (j < 8) && (entry->d_name[i] != '.') && (entry->d_name[i] != '\0'); i++, j++) {
- entry->entryData[j] = entry->d_name[i];
- }
- while (j < 8) {
- entry->entryData[j] = ' ';
- ++ j;
- }
- if (entry->d_name[i] == '.') {
- // Copy extension
- ++ i;
- while ((entry->d_name[i] != '\0') && (j < 11)) {
- entry->entryData[j] = entry->d_name[i];
- ++ i;
- ++ j;
- }
- }
- while (j < 11) {
- entry->entryData[j] = ' ';
- ++ j;
- }
- // Short filename
- strupr (entry->entryData);
- }else {
- // Long filename needed
- //memset( entry->unicodeFilename, 0, 512 );
- //_FAT_utf8_to_unicode16( (const char*)entry->d_name, entry->unicodeFilename );
- memset( unicodeFilename, 0, 512 );
- _FAT_utf8_to_unicode16( (const char*)entry->d_name, unicodeFilename );
-
- //entrySize = ((strnlen (entry->filename, MAX_FILENAME_LENGTH) + LFN_ENTRY_LENGTH - 1) / LFN_ENTRY_LENGTH) + 1;
- //entrySize = ((_unistrnlen( entry->unicodeFilename, MAX_FILENAME_LENGTH ) + LFN_ENTRY_LENGTH - 1) / LFN_ENTRY_LENGTH) + 1;
- entrySize = ((_unistrnlen( unicodeFilename, MAX_FILENAME_LENGTH ) + LFN_ENTRY_LENGTH - 1) / LFN_ENTRY_LENGTH) + 1;
-
- // Generate alias
- tmpCharPtr = strrchr (entry->d_name, '.');
- if (tmpCharPtr == NULL) {
- tmpCharPtr = strrchr (entry->d_name, '\0');
- }
- for (i = 0, j = 0; (j < 6) && (entry->d_name + i < tmpCharPtr); i++) {
- if ( _uniisalnum((u8)(entry->d_name[i]))) {
- alias[j] = entry->d_name[i];
- ++ j;
- }
- }
- while (j < 8) {
- alias[j] = '_';
- ++ j;
- }
- tmpCharPtr = strrchr (entry->d_name, '.');
- if (tmpCharPtr != NULL) {
- alias[8] = '.';
- // Copy extension
- while ((tmpCharPtr != '\0') && (j < 12)) {
- alias[j] = tmpCharPtr[0];
- ++ tmpCharPtr;
- ++ j;
- }
- alias[j] = '\0';
- } else {
- for (j = 8; j < MAX_ALIAS_LENGTH; j++) {
- alias[j] = '\0';
- }
- }
-
- // Get a valid tail number
- alias[5] = '~';
- i = 0;
- do {
- i++;
- alias[6] = '0' + ((i / 10) % 10); // 10's digit
- alias[7] = '0' + (i % 10); // 1's digit
- } while (_FAT_directory_entryExistsSFN (partition, alias, dirCluster) && (i < 100));
- if (i == 100) {
- // Couldn't get a tail number
- return false;
- }
-
- // Make it upper case
- strupr (alias);
-
- // Now copy it into the directory entry data
- memcpy (entry->entryData, alias, 8);
- memcpy (entry->entryData + 8, alias + 9, 3);
- for (i = 0; i < 10; i++) {
- if (entry->entryData[i] < 0x20) {
- // Replace null and control characters with spaces
- entry->entryData[i] = 0x20;
- }
- }
- // Generate alias checksum
- for (i=0; i < 11; i++)
- {
- // NOTE: The operation is an unsigned char rotate right
- aliasCheckSum = ((aliasCheckSum & 1) ? 0x80 : 0) + (aliasCheckSum >> 1) + entry->entryData[i];
- }
-
- }
-
- // Find or create space for the entry
- if (_FAT_directory_findEntryGap (partition, entry, dirCluster, entrySize) == false) {
- return false;
- }
-
- // Write out directory entry
- curEntryPos = entry->dataStart;
-
- for (entryStillValid = true, i = entrySize; entryStillValid && i > 0;
- entryStillValid = _FAT_directory_incrementDirEntryPosition (partition, &curEntryPos, false), -- i )
- {
- if (i > 1) {
- // Long filename entry
- lfnEntry[LFN_offset_ordinal] = (i - 1) | (i == entrySize ? LFN_END : 0);
- for (j = 0; j < 13; j++) {
- //if (entry->unicodeFilename[(i - 2) * 13 + j] == '\0') {
- if (unicodeFilename[(i - 2) * 13 + j] == '\0') {
- //if ((j > 1) && (entry->unicodeFilename[(i - 2) * 13 + (j-1)] == '\0')) {
- if ((j > 1) && (unicodeFilename[(i - 2) * 13 + (j-1)] == '\0')) {
- u16_to_u8array (lfnEntry, LFN_offset_table[j], 0xffff); // Padding
- } else {
- u16_to_u8array (lfnEntry, LFN_offset_table[j], 0x0000); // Terminating null character
- }
- } else {
- //u16_to_u8array (lfnEntry, LFN_offset_table[j], entry->unicodeFilename[(i - 2) * 13 + j]);
- u16_to_u8array (lfnEntry, LFN_offset_table[j], unicodeFilename[(i - 2) * 13 + j]);
- }
- }
-
- lfnEntry[LFN_offset_checkSum] = aliasCheckSum;
- lfnEntry[LFN_offset_flag] = ATTRIB_LFN;
- lfnEntry[LFN_offset_reserved1] = 0;
- u16_to_u8array (lfnEntry, LFN_offset_reserved2, 0);
- _FAT_cache_writePartialSector (partition->cache, lfnEntry, _FAT_fat_clusterToSector(partition, curEntryPos.cluster) + curEntryPos.sector, curEntryPos.offset * DIR_ENTRY_DATA_SIZE, DIR_ENTRY_DATA_SIZE);
- } else {
- // Alias & file data
- _FAT_cache_writePartialSector (partition->cache, entry->entryData, _FAT_fat_clusterToSector(partition, curEntryPos.cluster) + curEntryPos.sector, curEntryPos.offset * DIR_ENTRY_DATA_SIZE, DIR_ENTRY_DATA_SIZE);
- }
- }
-
- return true;
-}
-
-bool _FAT_directory_chdir (PARTITION* partition, const char* path) {
- DIR_ENTRY entry;
-
- if (!_FAT_directory_entryFromPath (partition, &entry, path, NULL)) {
- return false;
- }
-
- if (!(entry.entryData[DIR_ENTRY_attributes] & ATTRIB_DIR)) {
- return false;
- }
-
- partition->cwdCluster = _FAT_directory_entryGetCluster (entry.entryData);
-
- return true;
-}
-
-void _FAT_directory_entryStat (PARTITION* partition, DIR_ENTRY* entry, struct stat *st) {
- // Fill in the stat struct
- // Some of the values are faked for the sake of compatibility
- st->st_dev = _FAT_disc_hostType(partition->disc); // The device is the 32bit ioType value
- st->st_ino = (ino_t)(_FAT_directory_entryGetCluster(entry->entryData)); // The file serial number is the start cluster
- st->st_mode = (_FAT_directory_isDirectory(entry) ? S_IFDIR : S_IFREG) |
- (S_IRUSR | S_IRGRP | S_IROTH) |
- (_FAT_directory_isWritable (entry) ? (S_IWUSR | S_IWGRP | S_IWOTH) : 0) |
- (_FAT_directory_isHidden (entry) ? S_IHIDDEN : 0); // Mode bits based on dirEntry ATTRIB byte
- st->st_nlink = 1; // Always one hard link on a FAT file
- st->st_uid = 1; // Faked for FAT
- st->st_gid = 2; // Faked for FAT
- st->st_rdev = st->st_dev;
- st->st_size = u8array_to_u32 (entry->entryData, DIR_ENTRY_fileSize); // File size
- st->st_atime = _FAT_filetime_to_time_t (
- 0,
- u8array_to_u16 (entry->entryData, DIR_ENTRY_aDate)
- );
- //st->st_spare1 = _FAT_directory_isHidden (entry);
- st->st_mtime = _FAT_filetime_to_time_t (
- u8array_to_u16 (entry->entryData, DIR_ENTRY_mTime),
- u8array_to_u16 (entry->entryData, DIR_ENTRY_mDate)
- );
- //st->st_spare2 = 0;
- st->st_ctime = _FAT_filetime_to_time_t (
- u8array_to_u16 (entry->entryData, DIR_ENTRY_cTime),
- u8array_to_u16 (entry->entryData, DIR_ENTRY_cDate)
- );
- //st->st_spare3 = 0;
- st->st_blksize = BYTES_PER_READ; // Prefered file I/O block size
- st->st_blocks = (st->st_size + BYTES_PER_READ - 1) / BYTES_PER_READ; // File size in blocks
-// st->st_spare4[0] = 0;
-// st->st_spare4[1] = 0;
-}
diff --git a/sdk-modifications/libsrc/fs/directory.h b/sdk-modifications/libsrc/fs/directory.h deleted file mode 100755 index 654c5d2..0000000 --- a/sdk-modifications/libsrc/fs/directory.h +++ /dev/null @@ -1,180 +0,0 @@ -/* - directory.h - Reading, writing and manipulation of the directory structure on - a FAT partition - - Copyright (c) 2006 Michael "Chishm" Chisholm - - Redistribution and use in source and binary forms, with or without modification, - are permitted provided that the following conditions are met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - 2. Redistributions in binary form must reproduce the above copyright notice, - this list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. - 3. The name of the author may not be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED - WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY - AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - - 2006-07-11 - Chishm - * Original release -*/ - -#ifndef _DIRECTORY_H -#define _DIRECTORY_H - -#include <sys/stat.h> - -#include "fs_common.h" -#include "partition.h" - -#define DIR_ENTRY_DATA_SIZE 0x20 -#define MAX_FILENAME_LENGTH 256 -#define MAX_ALIAS_LENGTH 13 -#define LFN_ENTRY_LENGTH 13 -#define FAT16_ROOT_DIR_CLUSTER 0 - -#define DIR_SEPARATOR '/' - -// File attributes -#define S_IHIDDEN 0x00200000 - - -#define ATTRIB_ARCH 0x20 // Archive -#define ATTRIB_DIR 0x10 // Directory -#define ATTRIB_LFN 0x0F // Long file name -#define ATTRIB_VOL 0x08 // Volume -#define ATTRIB_SYS 0x04 // System -#define ATTRIB_HID 0x02 // Hidden -#define ATTRIB_RO 0x01 // Read only - -typedef enum {FT_DIRECTORY, FT_FILE} FILE_TYPE; - -typedef struct { - u32 cluster; - u32 sector; - s32 offset; -} DIR_ENTRY_POSITION; - -typedef struct { - u8 entryData[DIR_ENTRY_DATA_SIZE]; - DIR_ENTRY_POSITION dataStart; // Points to the start of the LFN entries of a file, or the alias for no LFN - DIR_ENTRY_POSITION dataEnd; // Always points to the file/directory's alias entry - char d_name[MAX_FILENAME_LENGTH + MAX_FILENAME_LENGTH*2]; //Store name string using UTF8 coding - //u16 unicodeFilename[MAX_FILENAME_LENGTH]; -} DIR_ENTRY; - -// Directory entry offsets -enum DIR_ENTRY_offset { - DIR_ENTRY_name = 0x00, - DIR_ENTRY_extension = 0x08, - DIR_ENTRY_attributes = 0x0B, - DIR_ENTRY_reserved = 0x0C, - DIR_ENTRY_cTime_ms = 0x0D, - DIR_ENTRY_cTime = 0x0E, - DIR_ENTRY_cDate = 0x10, - DIR_ENTRY_aDate = 0x12, - DIR_ENTRY_clusterHigh = 0x14, - DIR_ENTRY_mTime = 0x16, - DIR_ENTRY_mDate = 0x18, - DIR_ENTRY_cluster = 0x1A, - DIR_ENTRY_fileSize = 0x1C -}; - -/* -Returns true if the file specified by entry is a directory -*/ -static inline bool _FAT_directory_isDirectory (DIR_ENTRY* entry) { - return ((entry->entryData[DIR_ENTRY_attributes] & ATTRIB_DIR) != 0); -} - -static inline bool _FAT_directory_isWritable (DIR_ENTRY* entry) { - return ((entry->entryData[DIR_ENTRY_attributes] & ATTRIB_RO) == 0); -} - -static inline bool _FAT_directory_isDot (DIR_ENTRY* entry) { - return ((entry->d_name[0] == '.') && ((entry->d_name[1] == '\0') || - ((entry->d_name[1] == '.') && entry->d_name[2] == '\0'))); -} - -static inline bool _FAT_directory_isHidden (DIR_ENTRY* entry) { - return ((entry->entryData[DIR_ENTRY_attributes] & ATTRIB_HID) != 0); -} - - -/* -Reads the first directory entry from the directory starting at dirCluster -Places result in entry -entry will be destroyed even if no directory entry is found -Returns true on success, false on failure -*/ -bool _FAT_directory_getFirstEntry (PARTITION* partition, DIR_ENTRY* entry, u32 dirCluster); - -/* -Reads the next directory entry after the one already pointed to by entry -Places result in entry -entry will be destroyed even if no directory entry is found -Returns true on success, false on failure -*/ -bool _FAT_directory_getNextEntry (PARTITION* partition, DIR_ENTRY* entry); - -/* -Gets the directory entry corrsponding to the supplied path -entry will be destroyed even if no directory entry is found -pathEnd specifies the end of the path string, for cutting strings short if needed - specify NULL to use the full length of path - pathEnd is only a suggestion, and the path string will be searched up until the next PATH_SEPARATOR - after pathEND. -Returns true on success, false on failure -*/ -bool _FAT_directory_entryFromPath (PARTITION* partition, DIR_ENTRY* entry, const char* path, const char* pathEnd); - -/* -Changes the current directory to the one specified by path -Returns true on success, false on failure -*/ -bool _FAT_directory_chdir (PARTITION* partition, const char* path); - -/* -Removes the directory entry specified by entry -Assumes that entry is valid -Returns true on success, false on failure -*/ -bool _FAT_directory_removeEntry (PARTITION* partition, DIR_ENTRY* entry); - -/* -Add a directory entry to the directory specified by dirCluster -The fileData, dataStart and dataEnd elements of the DIR_ENTRY struct are -updated with the new directory entry position and alias. -Returns true on success, false on failure -*/ -bool _FAT_directory_addEntry (PARTITION* partition, DIR_ENTRY* entry, u32 dirCluster); - -/* -Get the start cluster of a file from it's entry data -*/ -u32 _FAT_directory_entryGetCluster (const u8* entryData); - -/* -Fill in the file name and entry data of DIR_ENTRY* entry. -Assumes that the entry's dataStart and dataEnd are correct -Returns true on success, false on failure -*/ -bool _FAT_directory_entryFromPosition (PARTITION* partition, DIR_ENTRY* entry); - -/* -Fill in a stat struct based on a file entry -*/ -void _FAT_directory_entryStat (PARTITION* partition, DIR_ENTRY* entry, struct stat *st); - -#endif // _DIRECTORY_H diff --git a/sdk-modifications/libsrc/fs/disc_io/disc.c b/sdk-modifications/libsrc/fs/disc_io/disc.c deleted file mode 100755 index 8b50953..0000000 --- a/sdk-modifications/libsrc/fs/disc_io/disc.c +++ /dev/null @@ -1,194 +0,0 @@ -/*
-
- disc.c
-
- uniformed io-interface to work with Chishm's FAT library
-
- Written by MightyMax
-
-
- Copyright (c) 2006 Michael "Chishm" Chisholm
-
- Redistribution and use in source and binary forms, with or without modification,
- are permitted provided that the following conditions are met:
-
- 1. Redistributions of source code must retain the above copyright notice,
- this list of conditions and the following disclaimer.
- 2. Redistributions in binary form must reproduce the above copyright notice,
- this list of conditions and the following disclaimer in the documentation and/or
- other materials provided with the distribution.
- 3. The name of the author may not be used to endorse or promote products derived
- from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
- WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
- EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
- 2005-11-06 - Chishm
- * Added WAIT_CR modifications for NDS
-
- 2006-02-03 www.neoflash.com
- * Added SUPPORT_* defines, comment out any of the SUPPORT_* defines in disc_io.h to remove support
- for the given interface and stop code being linked to the binary
-
- * Added support for MK2 MMC interface
-
- * Added disc_Cache* functions
-
- 2006-02-05 - Chishm
- * Added Supercard SD support
-
- 2006-02-26 - Cytex
- * Added EFA2 support
-
- 2006-05-18 - Chishm
- * Rewritten for FATlib disc.c
-
- 2006-06-19 - Chishm
- * Changed read and write interface to accept a u32 instead of a u8 for the number of sectors
-
- 2006-07-11 - Chishm
- * Removed disc_Cache* functions, since there is now a proper unified cache
- * Removed SUPPORT_* defines
- * Rewrote device detection functions
- * First libfat release
-
- 2006-07-25 - Chishm
- * Changed IO_INTERFACEs to const
-
- 2006-08-02 - Chishm
- * Added NinjaDS
-*/
-
-#include "disc.h"
-#include "disc_io.h"
-
-// Include known io-interfaces:
-//#include "io_dldi.h"
-//#include "io_mpcf.h"
-//#include "io_m3cf.h"
-//#include "io_m3sd.h"
-//#include "io_sccf.h"
-//#include "io_scsd.h"
-//#include "io_fcsr.h"
-//#include "io_nmmc.h"
-//#include "io_efa2.h"
-//#include "io_mmcf.h"
-//#include "io_njsd.h"
-//#include "io_acekard.h"
-//#include "io_rpg_nand.h"
-//#include "io_rpg_sd.h"
-//#include "iointerface_sc.h" -#include "io_ds2_mmcf.h"
-
-const IO_INTERFACE* ioInterfaces[] = {
- //&_io_dldi,
- //&_io_fcsr,
-#ifdef NDS
- // Place Slot 1 (DS Card) interfaces here
- //&_io_rpg_sd, //&_io_rpg_nand, /*&_io_acekard, */
- // Place Slot 2 (GBA Cart) interfaces here
- //&_io_scsd, &_io_mpcf, &_io_m3cf, &_io_sccf, &_io_m3sd, &_io_fcsr
- // Experimental Slot 2 interfaces
- //, &_io_mmcf, &_io_efa2
- &_io_ds2_mmcf,
-#endif
-};
-
-/*
-
- Hardware level disc funtions
-
-*/
-
-
-const IO_INTERFACE* _FAT_disc_gbaSlotFindInterface (void)
-{
- // If running on an NDS, make sure the correct CPU can access
- // the GBA cart. First implemented by SaTa.
-#ifdef NDS
- #ifdef ARM9
- REG_EXMEMCNT &= ~ARM7_OWNS_ROM;
- #endif
- #ifdef ARM7
- REG_EXMEMCNT |= ARM7_OWNS_ROM;
- #endif
-#endif
-
- int i;
-
- for (i = 0; i < (sizeof(ioInterfaces) / sizeof(IO_INTERFACE*)); i++) {
- if ((ioInterfaces[i]->features & FEATURE_SLOT_GBA) && (ioInterfaces[i]->fn_startup())) {
- return ioInterfaces[i];
- }
- }
- return NULL;
-}
-
-#ifdef NDS
-/*
- * Check the DS card slot for a valid memory card interface
- * If an interface is found, it is set as the default interace
- * and it returns true. Otherwise the default interface is left
- * untouched and it returns false.
- */
-const IO_INTERFACE* _FAT_disc_dsSlotFindInterface (void)
-{
-#ifdef ARM9
- REG_EXMEMCNT &= ~ARM7_OWNS_CARD;
-#endif
-#ifdef ARM7
- REG_EXMEMCNT |= ARM7_OWNS_CARD;
-#endif
- int i;
-
- for (i = 0; i < (sizeof(ioInterfaces) / sizeof(IO_INTERFACE*)); i++) {
- if ((ioInterfaces[i]->features & FEATURE_SLOT_NDS) && (ioInterfaces[i]->fn_startup())) {
- return ioInterfaces[i];
- }
- }
-
- return NULL;
-}
-#endif
-
-/*
- * When running on an NDS, check the either slot for a valid memory
- * card interface.
- * When running on a GBA, call _FAT_disc_gbaSlotFindInterface
- * If an interface is found, it is set as the default interace
- * and it returns true. Otherwise the default interface is left
- * untouched and it returns false.
- */
-#ifdef NDS
-const IO_INTERFACE* _FAT_disc_findInterface (void)
-{
-#ifdef ARM9
- REG_EXMEMCNT &= ~(ARM7_OWNS_CARD | ARM7_OWNS_ROM);
-#endif
-#ifdef ARM7
- REG_EXMEMCNT |= (ARM7_OWNS_CARD | ARM7_OWNS_ROM);
-#endif
-
- int i;
-
- for (i = 0; i < (sizeof(ioInterfaces) / sizeof(IO_INTERFACE*)); i++) {
- if (ioInterfaces[i]->fn_startup()) {
- return ioInterfaces[i];
- }
- }
-
- return NULL;
-}
-#else
-const IO_INTERFACE* _FAT_disc_findInterface (void)
-{
- return _FAT_disc_gbaSlotFindInterface();
-}
-#endif
diff --git a/sdk-modifications/libsrc/fs/disc_io/disc.h b/sdk-modifications/libsrc/fs/disc_io/disc.h deleted file mode 100755 index 2129359..0000000 --- a/sdk-modifications/libsrc/fs/disc_io/disc.h +++ /dev/null @@ -1,128 +0,0 @@ -/* - disc.h - Interface to the low level disc functions. Used by the higher level - file system code. - - Copyright (c) 2006 Michael "Chishm" Chisholm - - Redistribution and use in source and binary forms, with or without modification, - are permitted provided that the following conditions are met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - 2. Redistributions in binary form must reproduce the above copyright notice, - this list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. - 3. The name of the author may not be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED - WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY - AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - - 2006-07-11 - Chishm - * Original release - -*/ -#ifndef _DISC_H -#define _DISC_H - -#include "../fs_common.h" -#include "disc_io.h" - -/* -Search for a block based device in the GBA slot. -Return a pointer to a usable interface if one is found, -NULL if not. -*/ -extern const IO_INTERFACE* _FAT_disc_gbaSlotFindInterface (void); - -/* -Search for a block based device in the DS slot. -Return a pointer to a usable interface if one is found, -NULL if not. -*/ -#ifdef NDS -extern const IO_INTERFACE* _FAT_disc_dsSlotFindInterface (void); -#endif - -/* -Search for a block based device in the both slots. -Return a pointer to a usable interface if one is found, -NULL if not. -*/ -extern const IO_INTERFACE* _FAT_disc_findInterface (void); - -/* -Check if a disc is inserted -Return true if a disc is inserted and ready, false otherwise -*/ -static inline bool _FAT_disc_isInserted (const IO_INTERFACE* disc) { - return disc->fn_isInserted(); -} - -/* -Read numSectors sectors from a disc, starting at sector. -numSectors is between 1 and 256 -sector is from 0 to 2^28 -buffer is a pointer to the memory to fill -*/ -//return non-zero is sucess -static inline bool _FAT_disc_readSectors (const IO_INTERFACE* disc, unsigned long sector, unsigned long numSectors, void* buffer) { - return disc->fn_readSectors (sector, numSectors, buffer); -} - -/* -Write numSectors sectors to a disc, starting at sector. -numSectors is between 1 and 256 -sector is from 0 to 2^28 -buffer is a pointer to the memory to read from -*/ -//return non-zero is sucess -static inline bool _FAT_disc_writeSectors (const IO_INTERFACE* disc, unsigned long sector, unsigned long numSectors, const void* buffer) { - return disc->fn_writeSectors (sector, numSectors, buffer); -} - -/* -Reset the card back to a ready state -*/ -static inline bool _FAT_disc_clearStatus (const IO_INTERFACE* disc) { - return disc->fn_clearStatus(); -} - -/* -Initialise the disc to a state ready for data reading or writing -*/ -static inline bool _FAT_disc_startup (const IO_INTERFACE* disc) { - return disc->fn_startup(); -} - -/* -Put the disc in a state ready for power down. -Complete any pending writes and disable the disc if necessary -*/ -static inline bool _FAT_disc_shutdown (const IO_INTERFACE* disc) { - return disc->fn_shutdown(); -} - -/* -Return a 32 bit value unique to each type of interface -*/ -static inline unsigned long _FAT_disc_hostType (const IO_INTERFACE* disc) { - return disc->ioType; -} - -/* -Return a 32 bit value that specifies the capabilities of the disc -*/ -static inline unsigned long _FAT_disc_features (const IO_INTERFACE* disc) { - return disc->features; -} - -#endif // _DISC_H diff --git a/sdk-modifications/libsrc/fs/disc_io/disc_io.h b/sdk-modifications/libsrc/fs/disc_io/disc_io.h deleted file mode 100755 index 6ac0c31..0000000 --- a/sdk-modifications/libsrc/fs/disc_io/disc_io.h +++ /dev/null @@ -1,83 +0,0 @@ -/* - disc_io.h - Interface template for low level disc functions. - - Copyright (c) 2006 Michael "Chishm" Chisholm - - Redistribution and use in source and binary forms, with or without modification, - are permitted provided that the following conditions are met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - 2. Redistributions in binary form must reproduce the above copyright notice, - this list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. - 3. The name of the author may not be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED - WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY - AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - - 2006-07-11 - Chishm - * Original release - - 2006-07-16 - Chishm - * Renamed _CF_USE_DMA to _IO_USE_DMA - * Renamed _CF_ALLOW_UNALIGNED to _IO_ALLOW_UNALIGNED -*/ - -#ifndef _DISC_IO_H -#define _DISC_IO_H - -#include "../fs_common.h" - -//---------------------------------------------------------------------- -// Customisable features - -// Use DMA to read the card, remove this line to use normal reads/writes -// #define _IO_USE_DMA - -// Allow buffers not alligned to 16 bits when reading files. -// Note that this will slow down access speed, so only use if you have to. -// It is also incompatible with DMA -//#define _IO_ALLOW_UNALIGNED - -#define _IO_USE_DMA - -#if defined _IO_USE_DMA && defined _IO_ALLOW_UNALIGNED - #error You can't use both DMA and unaligned memory -#endif - -#define FEATURE_MEDIUM_CANREAD 0x00000001 -#define FEATURE_MEDIUM_CANWRITE 0x00000002 -#define FEATURE_SLOT_GBA 0x00000010 -#define FEATURE_SLOT_NDS 0x00000020 - -typedef bool (* FN_MEDIUM_STARTUP)(void) ; -typedef bool (* FN_MEDIUM_ISINSERTED)(void) ; -typedef bool (* FN_MEDIUM_READSECTORS)(unsigned long sector, unsigned long numSectors, void* buffer) ; -typedef bool (* FN_MEDIUM_WRITESECTORS)(unsigned long sector, unsigned long numSectors, const void* buffer) ; -typedef bool (* FN_MEDIUM_CLEARSTATUS)(void) ; -typedef bool (* FN_MEDIUM_SHUTDOWN)(void) ; - -struct IO_INTERFACE_STRUCT { - unsigned long ioType ; - unsigned long features ; - FN_MEDIUM_STARTUP fn_startup ; - FN_MEDIUM_ISINSERTED fn_isInserted ; - FN_MEDIUM_READSECTORS fn_readSectors ; - FN_MEDIUM_WRITESECTORS fn_writeSectors ; - FN_MEDIUM_CLEARSTATUS fn_clearStatus ; - FN_MEDIUM_SHUTDOWN fn_shutdown ; -} ; - -typedef struct IO_INTERFACE_STRUCT IO_INTERFACE ; - -#endif // define _DISC_IO_H diff --git a/sdk-modifications/libsrc/fs/disc_io/io_ds2_mmcf.c b/sdk-modifications/libsrc/fs/disc_io/io_ds2_mmcf.c deleted file mode 100755 index c432d84..0000000 --- a/sdk-modifications/libsrc/fs/disc_io/io_ds2_mmcf.c +++ /dev/null @@ -1,13 +0,0 @@ -//io_ds2_mmcf.c
-#include "io_ds2_mmcf.h"
-
-const IO_INTERFACE _io_ds2_mmcf = {
- DEVICE_TYPE_DS2_MMCF,
- FEATURE_MEDIUM_CANREAD | FEATURE_MEDIUM_CANWRITE,
- (FN_MEDIUM_STARTUP)&_MMC_StartUp,
- (FN_MEDIUM_ISINSERTED)&_MMC_IsInserted,
- (FN_MEDIUM_READSECTORS)&_MMC_ReadSectors,
- (FN_MEDIUM_WRITESECTORS)&_MMC_WriteSectors,
- (FN_MEDIUM_CLEARSTATUS)&_MMC_ClearStatus,
- (FN_MEDIUM_SHUTDOWN)&_MMC_ShutDown
-};
diff --git a/sdk-modifications/libsrc/fs/disc_io/io_ds2_mmcf.h b/sdk-modifications/libsrc/fs/disc_io/io_ds2_mmcf.h deleted file mode 100755 index 334a9bc..0000000 --- a/sdk-modifications/libsrc/fs/disc_io/io_ds2_mmcf.h +++ /dev/null @@ -1,63 +0,0 @@ -#ifndef __IO_DS2_H__
-#define __IO_DS2_H__
-
-// 'DS2F'
-#define DEVICE_TYPE_DS2_MMCF 0x46434D4D
-
-#include "disc_io.h"
-#include "ds2_mmc_api.h"
-
-// export interface
-extern const IO_INTERFACE _io_ds2_mmcf ;
-
-/* initialize MMC/SD card */
-static inline bool _MMC_StartUp(void)
-{
- return MMC_Initialize();
-}
-
-/* read multi blocks from MMC/SD card */
-/* read a single block from MMC/SD card */
-static inline bool _MMC_ReadSectors(u32 sector, u32 numSectors, void* buffer)
-{ - int flag; -
- if(numSectors > 1)
- flag= MMC_ReadMultiBlock(sector, numSectors, (unsigned char*)buffer);
- else
- flag= MMC_ReadBlock(sector, (unsigned char*)buffer); - return (flag==MMC_NO_ERROR);
-}
-
-/* write multi blocks from MMC/SD card */
-/* write a single block from MMC/SD card */
-static inline bool _MMC_WriteSectors(u32 sector, u32 numSectors, const void* buffer)
-{
- int flag; - - if(numSectors > 1)
- flag= MMC_WriteMultiBlock(sector, numSectors, (unsigned char*)buffer);
- else
- flag= MMC_WriteBlock(sector, (unsigned char*)buffer); - - return (flag==MMC_NO_ERROR);
-}
-
-static inline bool _MMC_ClearStatus(void)
-{
- return true;
-}
-
-static inline bool _MMC_ShutDown(void)
-{
- return true;
-}
-
-static inline bool _MMC_IsInserted(void)
-{
- return true;
-}
-
-
-#endif //__IO_DS2_H__ - diff --git a/sdk-modifications/libsrc/fs/ds2_fcntl.c b/sdk-modifications/libsrc/fs/ds2_fcntl.c deleted file mode 100755 index 0fc00d7..0000000 --- a/sdk-modifications/libsrc/fs/ds2_fcntl.c +++ /dev/null @@ -1,126 +0,0 @@ -#include <stdarg.h>
-#include <errno.h>
-#include "ds2_fcntl.h"
-#include "fs_api.h"
-#include "ds2_malloc.h"
-
-
-/*typedef struct {
- FILE_STRUCT* stream;
- int flags;
-} _fd_t;
-
-_fd_t* _fd_list = NULL;
-int _fd_count = 0;*/
-
-int open(const char* path, int oflag, ... ) {
- if(oflag & _O_UNSUPPORTED) {
- errno = EINVAL;
- return -1;
- }
- // TODO - Deal more correctly with certain flags.
- FILE_STRUCT* tempFile = fat_fopen(path, "rb");
- if(oflag & O_CREAT) {
- if(tempFile == NULL)
- tempFile = fat_fopen(path, "wb");
- if(tempFile == NULL)
- return -1;
- } else if(tempFile == NULL) {
- return -1;
- } else if(oflag & O_TRUNC) {
- tempFile = fat_fopen(path, "wb");
- if(tempFile == NULL)
- return -1;
- }
- fat_fclose(tempFile);
-
- char tempMode[16];
- if((oflag & 0x3) == O_RDONLY) {
- sprintf(tempMode, "rb");
- } else if((oflag & 0x3) == O_WRONLY) {
- if(oflag & O_APPEND)
- sprintf(tempMode, "ab");
- else
- sprintf(tempMode, "wb");
- } else if((oflag & 0x3) == O_RDWR) {
- if(oflag & O_APPEND)
- sprintf(tempMode, "ab+");
- else
- sprintf(tempMode, "rb+");
- }
-
- tempFile = fat_fopen(path, tempMode);
- if(tempFile == NULL)
- return -1;
-
- return tempFile -> fd;
-}
-
-int fcntl(int fildes, int cmd, ...) {
- /*if((fildes < 0) || (fildes >= _fd_count) || (_fd_list[fildes].stream == NULL)) {
- errno = EINVAL;
- return -1;
- }
- if((cmd <= 0) || (cmd > _F_LAST)) {
- errno = EINVAL;
- return -1;
- }
-
- va_list ap;
-
- int arg;
- void* flock;
- switch(cmd) {
- case F_SETFD:
- case F_SETOWN:
- va_start(ap, cmd);
- arg = va_arg(ap, int);
- va_end(ap);
- break;
- case F_GETLK:
- case F_SETLK:
- va_start(ap, cmd);
- flock = va_arg(ap, void*);
- va_end(ap);
- break;
- }
-
- switch(cmd) {
- case F_DUPFD: // Duplicate file descriptors not supported.
- errno = EINVAL;
- return -1;
- case F_GETFD:
- return (_fd_list[fildes].flags & _F_FILE_DESC);
- case F_SETFD:
- arg &= _F_FILE_DESC;
- _fd_list[fildes].flags &= ~_F_FILE_DESC;
- _fd_list[fildes].flags |= arg;
- return 0;
- case F_GETFL:
- return (_fd_list[fildes].flags & (O_ACCMODE | _O_FILE_STATUS));
- case F_SETFL:
- arg &= (O_ACCMODE | _O_FILE_STATUS);
- if(arg & _O_UNSUPPORTED) {
- errno = EINVAL;
- return -1;
- }
- if((arg & O_ACCMODE) != (_fd_list[fildes].flags & O_ACCMODE)) {
- errno = EINVAL;
- return -1;
- }
- _fd_list[fildes].flags &= ~(O_ACCMODE | _O_FILE_STATUS);
- _fd_list[fildes].flags |= arg;
- return 0;
- case F_GETOWN:
- case F_SETOWN:
- errno = -1;
- return -1;
- case F_GETLK:
- case F_SETLK:
- case F_SETLKW:
- return -1;
- }
-
- errno = EINVAL;*/
- return -1;
-}
diff --git a/sdk-modifications/libsrc/fs/ds2_fcntl.h b/sdk-modifications/libsrc/fs/ds2_fcntl.h deleted file mode 100755 index 2c69221..0000000 --- a/sdk-modifications/libsrc/fs/ds2_fcntl.h +++ /dev/null @@ -1,51 +0,0 @@ -#ifndef __libc_fcntl_h__
-#define __libc_fcntl_h__
-
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-
-#define O_RDONLY (1 << 0)
-#define O_WRONLY (2 << 0)
-#define O_RDWR (3 << 0)
-#define O_APPEND (1 << 2)
-#define O_CREAT (1 << 3)
-#define O_DSYNC (1 << 4)
-#define O_EXCL (1 << 5)
-#define O_NOCTTY (1 << 6)
-#define O_NONBLOCK (1 << 7)
-#define O_RSYNC (1 << 8)
-#define O_SYNC (1 << 9)
-#define O_TRUNC (1 << 10)
-#define O_CREATE O_CREAT
-
-#define O_ACCMODE 0x3
-
-#define F_CLOEXEC (1 << 11)
-
-#define F_DUPFD 1
-#define F_GETFD 2
-#define F_SETFD 3
-#define F_GETFL 4
-#define F_SETFL 5
-#define F_GETLK 6
-#define F_SETLK 7
-#define F_SETLKW 8
-#define F_GETOWN 9
-#define F_SETOWN 10
-#define _F_LAST F_SETOWN
-
-#define _F_FILE_DESC (F_CLOEXEC)
-#define _O_FILE_CREATE (O_CREAT | O_EXCL | O_NOCTTY | O_TRUNC)
-#define _O_FILE_STATUS (O_APPEND | O_DSYNC | O_NONBLOCK | O_RSYNC | O_SYNC)
-#define _O_UNSUPPORTED (0)
-
-extern int open(const char* path, int oflag, ...);
-extern int fcntl(int fildes, int cmd, ...);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
diff --git a/sdk-modifications/libsrc/fs/ds2_unistd.c b/sdk-modifications/libsrc/fs/ds2_unistd.c deleted file mode 100755 index 8625eba..0000000 --- a/sdk-modifications/libsrc/fs/ds2_unistd.c +++ /dev/null @@ -1,18 +0,0 @@ -#include "ds2_unistd.h"
-#include "fs_api.h"
-
-int close(int fildes) {
- return _FAT_close_r (&__REENT, fildes);
-}
-
-int lseek(int fildes, int offset, int whence) {
- return _FAT_seek_r (&__REENT, fildes, (int)offset, whence);
-}
-
-int read(int fildes, void* buf, size_t len) {
- return _FAT_read_r (&__REENT, fildes, (char*)buf, len);
-}
-
-int write(int fildes, const void* buf, size_t len) {
- return _FAT_write_r (&__REENT, fildes, (const char*)buf, len);
-}
diff --git a/sdk-modifications/libsrc/fs/ds2_unistd.h b/sdk-modifications/libsrc/fs/ds2_unistd.h deleted file mode 100755 index f5efdb1..0000000 --- a/sdk-modifications/libsrc/fs/ds2_unistd.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef __libc_unistd_h__
-#define __libc_unistd_h__
-
-#include "fs_common.h"
-#include "fatfile.h"
-#include "fs_api.h"
-
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-
-extern int close(int fildes);
-extern int lseek(int fildes, int offset, int whence);
-extern int read(int fildes, void* buf, size_t len);
-extern int write(int fildes, const void* buf, size_t len);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
diff --git a/sdk-modifications/libsrc/fs/fat.h b/sdk-modifications/libsrc/fs/fat.h deleted file mode 100755 index 3ddbac3..0000000 --- a/sdk-modifications/libsrc/fs/fat.h +++ /dev/null @@ -1,118 +0,0 @@ -/* - fat.h - Simple functionality for startup, mounting and unmounting of FAT-based devices. - - Copyright (c) 2006 Michael "Chishm" Chisholm - - Redistribution and use in source and binary forms, with or without modification, - are permitted provided that the following conditions are met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - 2. Redistributions in binary form must reproduce the above copyright notice, - this list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. - 3. The name of the author may not be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED - WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY - AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - - 2006-07-11 - Chishm - * Original release - - 2006-07-14 - * fatInitialise renamed to fatInit - - 2006-07-16 - Chishm - * Added fatInitDefault -*/ - - -#ifndef _LIBFAT_H -#define _LIBFAT_H - -#ifdef __cplusplus -extern "C" { -#endif - -// When compiling for NDS, make sure NDS is defined -#ifndef NDS - #define NDS -#endif - -#include <nds/jtypes.h> -#include "partition.h" -#include "directory.h" -#include "file_allocation_table.h" -#include "unicode/unicode.h" -#include "fatdir_ex.h" -#include "fatfile_ex.h" - -//typedef enum {PI_DEFAULT, PI_SLOT_1, PI_SLOT_2, PI_CUSTOM} PARTITION_INTERFACE; - -struct IO_INTERFACE_STRUCT ; - -/* -Initialise any inserted block-devices. -Add the fat device driver to the devoptab, making it available for standard file functions. -cacheSize: The number of pages to allocate for each inserted block-device -setAsDefaultDevice: if true, make this the default device driver for file operations -*/ -bool fatInit (u32 cacheSize, bool setAsDefaultDevice); - -/* -Calls fatInit with setAsDefaultDevice = true and cacheSize optimised for the host system. -*/ -bool fatInitDefault (void); - -/* -Special initialize for RPG card -*/ -bool fatInitRPG (void); - -/* -Mount the device specified by partitionNumber -PD_DEFAULT is not allowed, use _FAT_partition_setDefaultDevice -PD_CUSTOM is not allowed, use _FAT_partition_mountCustomDevice -*/ -bool fatMountNormalInterface (PARTITION_INTERFACE partitionNumber, u32 cacheSize); - -/* -Mount a partition on a custom device -*/ -bool fatMountCustomInterface (struct IO_INTERFACE_STRUCT* device, u32 cacheSize); - -/* -Unmount the partition specified by partitionNumber -If there are open files, it will fail -*/ -bool fatUnmount (PARTITION_INTERFACE partitionNumber); - - -/* -Forcibly unmount the partition specified by partitionNumber -Any open files on the partition will become invalid -The cache will be invalidated, and any unflushed writes will be lost -*/ -bool fatUnsafeUnmount (PARTITION_INTERFACE partitionNumber); - -/* -Set the default device for access by fat: and fat0: -PD_DEFAULT is unallowed. -Doesn't do anything useful on GBA, since there is only one device -*/ -bool fatSetDefaultInterface (PARTITION_INTERFACE partitionNumber); - -#ifdef __cplusplus -} -#endif - -#endif // _LIBFAT_H diff --git a/sdk-modifications/libsrc/fs/fat_misc.c b/sdk-modifications/libsrc/fs/fat_misc.c deleted file mode 100644 index 335ab59..0000000 --- a/sdk-modifications/libsrc/fs/fat_misc.c +++ /dev/null @@ -1,140 +0,0 @@ -//fat_misc.c
-//v1.0
-
-#include "fat_misc.h"
-#include "fs_api.h"
-
-static unsigned int _usedSecNums;
-
-static int strFindFromEnd( char *str,char strValue )
-{
- int pos = 0,i = 0,strNum = 0;
- while(1)
- {
- if( (*str)!=0 )
- {
- strNum++;
- str++;
- }
- else
- {
- break;
- }
- }
- pos = strNum;
- for( i=0;i<strNum;i++ )
- {
- str--;
- pos--;
- if( (*str) == strValue||(*str) == ':' )
- {
- return pos;
- }
- if( (*str)== 0 )
- {
- return -1;
- }
- }
- return -1;
-}
-
-int getDirSize( const char * path, int includeSubdirs, unsigned int * dirSize )
-{
- char dirPath[MAX_FILENAME_LENGTH];
- unsigned int size = 0;
- if( "" == path ){
- return false;
- }
-
- memset( dirPath,0,MAX_FILENAME_LENGTH );
- strcpy( dirPath,path );
-
- if( dirPath[strlen(dirPath)-1] != '/' )
- dirPath[strlen(dirPath)] = '/';
- if( strlen(dirPath) > MAX_FILENAME_LENGTH )
- return false;
-
- DIR_STATE_STRUCT *dir;
- dir = fat_opendir((const char*)dirPath);
- if (dir == NULL)
- return false;
-
- struct stat stat_buf;
- DIR_ENTRY *currentEntry;
- char* filename;
-
- while((currentEntry = fat_readdir_ex(dir, &stat_buf)) != NULL)
- {
- filename = currentEntry->d_name;
-
- if (strcmp(filename, ".") == 0 || strcmp(filename, "..") == 0)
- continue;
-
- if (!(stat_buf.st_mode & S_IFDIR)) {
- size += (stat_buf.st_size+511)/512;
- _usedSecNums +=(stat_buf.st_size+511)/512;
- }
- else if (includeSubdirs)
- {
- // calculate the size recursively
- unsigned int subDirSize = 0;
- char dirPathBuffer[MAX_FILENAME_LENGTH];
-
- memset( dirPathBuffer,0,MAX_FILENAME_LENGTH );
- strcpy( dirPathBuffer,dirPath );
- memset( dirPath,0,MAX_FILENAME_LENGTH );
- sprintf( dirPath,"%s%s",dirPathBuffer,filename );
- int succ = getDirSize( dirPath, includeSubdirs, &subDirSize );
- if( succ ) {
- size += (subDirSize+511)/512;
- _usedSecNums +=(subDirSize+511)/512;
- }
- memset( dirPath,0,MAX_FILENAME_LENGTH );
- strcpy( dirPath,dirPathBuffer );
- }
- }
-
- fat_closedir(dir);
-
- *dirSize = size;
- return true;
-}
-
-int fat_getDiskTotalSpace( char * diskName, unsigned int * diskSpace )
-{
- if( !strcmp("",diskName) )
- return false;
-
- unsigned int len = strlen(diskName);
- if( *(diskName+len-1) != '/' ){
- *(diskName+len) = '/';
- }
-
- PARTITION * diskPartition = _FAT_partition_getPartitionFromPath( diskName );
- if( NULL == diskPartition )
- return false;
-
- *diskSpace = (unsigned int)diskPartition->numberOfSectors;
- return true;
-}
-
-int fat_getDiskSpaceInfo( char * diskName, unsigned int * total, unsigned int * used, unsigned int * freeSpace )
-{
- _usedSecNums = 0;
-
- if( !strcmp("",diskName) )
- return -1;
- if( !fat_getDiskTotalSpace(diskName, total) )
- return -1;
- if( !getDirSize(diskName, true, used) )
- return -1;
-
- *used = _usedSecNums;
- if( *total <= *used ){
- *freeSpace = 0;
- }else{
- *freeSpace = *total - *used;
- }
-
- return 0;
-}
diff --git a/sdk-modifications/libsrc/fs/fat_misc.h b/sdk-modifications/libsrc/fs/fat_misc.h deleted file mode 100755 index 05db0bb..0000000 --- a/sdk-modifications/libsrc/fs/fat_misc.h +++ /dev/null @@ -1,38 +0,0 @@ -/*--------------------------------------------------------------------------------
-Copyright (C) 2007 Acekard, www.acekard.com
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in
-all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-THE SOFTWARE.
-
-
----------------------------------------------------------------------------------*/
-#ifndef __FAT_MISC_H__
-#define __FAT_MISC_H__
- -#include "fs_common.h"
-#include "directory.h" -
typedef enum _SRC_FILE_MODE
-{
- SFM_COPY = 0,
- SFM_CUT = 1
-}SRC_FILE_MODE;
- -
-extern bool fat_getDiskSpaceInfo( char * diskName, unsigned int *total, unsigned int *used, unsigned int *freeSpace );
-
-#endif //__FAT_MISC_H__
diff --git a/sdk-modifications/libsrc/fs/fatdir.c b/sdk-modifications/libsrc/fs/fatdir.c deleted file mode 100644 index dc9b914..0000000 --- a/sdk-modifications/libsrc/fs/fatdir.c +++ /dev/null @@ -1,672 +0,0 @@ -/*
- fatdir.c
-
- Functions used by the newlib disc stubs to interface with
- this library
-
- Copyright (c) 2006 Michael "Chishm" Chisholm
-
- Redistribution and use in source and binary forms, with or without modification,
- are permitted provided that the following conditions are met:
-
- 1. Redistributions of source code must retain the above copyright notice,
- this list of conditions and the following disclaimer.
- 2. Redistributions in binary form must reproduce the above copyright notice,
- this list of conditions and the following disclaimer in the documentation and/or
- other materials provided with the distribution.
- 3. The name of the author may not be used to endorse or promote products derived
- from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
- WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
- EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
- 2006-08-13 - Chishm
- * Moved all externally visible directory related functions to fatdir
- * Added _FAT_mkdir_r
-
- 2006-08-14 - Chishm
- * Added directory iterator functions
-
- 2006-08-19 - Chishm
- * Updated dirnext return values to return correctly
-
- 2006-10-01 - Chishm
- * Now clears the whole cluster when creating a new directory, bug found by Hermes
-
- 2007-01-10 - Chishm
- * Updated directory iterator functions for DevkitPro r20
-*/
-
-/*
- 2010.06.30
- * Modify _FAT_diropen_r,
-*/
-
-#include <string.h>
-#include <errno.h>
-#include <ctype.h>
-#include <unistd.h>
-#include <sys/dir.h>
-
-#include "fatdir.h"
-
-#include "fs_cache.h"
-#include "file_allocation_table.h"
-#include "partition.h"
-#include "directory.h"
-#include "bit_ops.h"
-#include "filetime.h"
-#include "fs_unicode.h"
-
-
-int _FAT_stat_r (struct _reent *r, const char *path, struct stat *st) {
- PARTITION* partition = NULL;
-
- DIR_ENTRY dirEntry;
-
- // Get the partition this file is on
- partition = _FAT_partition_getPartitionFromPath (path);
-
- if (partition == NULL) {
- r->_errno = ENODEV;
- return -1;
- }
-
- // Move the path pointer to the start of the actual path
- if (strchr (path, ':') != NULL) {
- path = strchr (path, ':') + 1;
- }
- if (strchr (path, ':') != NULL) {
- r->_errno = EINVAL;
- return -1;
- }
-
- // Search for the file on the disc
- if (!_FAT_directory_entryFromPath (partition, &dirEntry, path, NULL)) {
- r->_errno = ENOENT;
- return -1;
- }
-
- // Fill in the stat struct
- _FAT_directory_entryStat (partition, &dirEntry, st);
-
- return 0;
-}
-
-int _FAT_getshortname_r (struct _reent *r, const char *name, char *outName) {
- PARTITION* partition = NULL;
- DIR_ENTRY DirEntry;
- u32 dirCluster;
-
- // Get the partition this directory is on
- partition = _FAT_partition_getPartitionFromPath (name);
-
- if (partition == NULL) {
- r->_errno = ENODEV;
- return 1;
- }
-
- // Move the path pointer to the start of the actual path
- if (strchr (name, ':') != NULL) {
- name = strchr (name, ':') + 1;
- }
- if (strchr (name, ':') != NULL) {
- r->_errno = EINVAL;
- return 1;
- }
-
- // Search for the file on the disc
- if (!_FAT_directory_entryFromPath (partition, &DirEntry, name, NULL)) {
- r->_errno = ENOENT;
- return 1;
- }
-
- strcpy(outName, DirEntry.entryData);
- return 1;
-}
-
-int _FAT_link_r (struct _reent *r, const char *existing, const char *newLink) {
- r->_errno = ENOTSUP;
- return -1;
-}
-
-int _FAT_unlink_r (struct _reent *r, const char *path) {
- PARTITION* partition = NULL;
- DIR_ENTRY dirEntry;
- DIR_ENTRY dirContents;
- u32 cluster;
- bool nextEntry;
- bool errorOccured = false;
-
- // Get the partition this directory is on
- partition = _FAT_partition_getPartitionFromPath (path);
-
- if (partition == NULL) {
- r->_errno = ENODEV;
- return -1;
- }
-
- // Make sure we aren't trying to write to a read-only disc
- if (partition->readOnly) {
- r->_errno = EROFS;
- return -1;
- }
-
- // Move the path pointer to the start of the actual path
- if (strchr (path, ':') != NULL) {
- path = strchr (path, ':') + 1;
- }
- if (strchr (path, ':') != NULL) {
- r->_errno = EINVAL;
- return -1;
- }
-
- // Search for the file on the disc
- if (!_FAT_directory_entryFromPath (partition, &dirEntry, path, NULL)) {
- r->_errno = ENOENT;
- return -1;
- }
-
- cluster = _FAT_directory_entryGetCluster (dirEntry.entryData);
-
-
- // If this is a directory, make sure it is empty
- if (_FAT_directory_isDirectory (&dirEntry)) {
- nextEntry = _FAT_directory_getFirstEntry (partition, &dirContents, cluster);
-
- while (nextEntry) {
- if (!_FAT_directory_isDot (&dirContents)) {
- // The directory had something in it that isn't a reference to itself or it's parent
- r->_errno = EPERM;
- return -1;
- }
- nextEntry = _FAT_directory_getNextEntry (partition, &dirContents);
- }
- }
-
- if (cluster != CLUSTER_FREE) {
- // Remove the cluster chain for this file
- if (!_FAT_fat_clearLinks (partition, cluster)) {
- r->_errno = EIO;
- errorOccured = true;
- }
- }
-
- // Remove the directory entry for this file
- if (!_FAT_directory_removeEntry (partition, &dirEntry)) {
- r->_errno = EIO;
- errorOccured = true;
- }
-
- // Flush any sectors in the disc cache
- if (!_FAT_cache_flush(partition->cache)) {
- r->_errno = EIO;
- errorOccured = true;
- }
-
- if (errorOccured) {
- return -1;
- } else {
- return 0;
- }
-}
-
-int _FAT_chdir_r (struct _reent *r, const char *path) {
- PARTITION* partition = NULL;
-
- // Get the partition this directory is on
- partition = _FAT_partition_getPartitionFromPath (path);
-
- if (partition == NULL) {
- r->_errno = ENODEV;
- return -1;
- }
-
- // Move the path pointer to the start of the actual path
- if (strchr (path, ':') != NULL) {
- path = strchr (path, ':') + 1;
- }
- if (strchr (path, ':') != NULL) {
- r->_errno = EINVAL;
- return -1;
- }
-
- // Set the default device to match this one
- if (!_FAT_partition_setDefaultPartition (partition)) {
- r->_errno = ENOENT;
- return -1;
- }
-
- // Try changing directory
- if (_FAT_directory_chdir (partition, path)) {
- // Successful
- return 0;
- } else {
- // Failed
- r->_errno = ENOTDIR;
- return -1;
- }
-}
-
-int _FAT_rename_r (struct _reent *r, const char *oldName, const char *newName) {
- PARTITION* partition = NULL;
- DIR_ENTRY oldDirEntry;
- DIR_ENTRY newDirEntry;
- const char *pathEnd;
- u32 dirCluster;
-
- // Get the partition this directory is on
- partition = _FAT_partition_getPartitionFromPath (oldName);
-
- if (partition == NULL) {
- r->_errno = ENODEV;
- return -1;
- }
-
- // Make sure the same partition is used for the old and new names
- if (partition != _FAT_partition_getPartitionFromPath (newName)) {
- r->_errno = EXDEV;
- return -1;
- }
-
- // Make sure we aren't trying to write to a read-only disc
- if (partition->readOnly) {
- r->_errno = EROFS;
- return -1;
- }
-
- // Move the path pointer to the start of the actual path
- if (strchr (oldName, ':') != NULL) {
- oldName = strchr (oldName, ':') + 1;
- }
- if (strchr (oldName, ':') != NULL) {
- r->_errno = EINVAL;
- return -1;
- }
- if (strchr (newName, ':') != NULL) {
- newName = strchr (newName, ':') + 1;
- }
- if (strchr (newName, ':') != NULL) {
- r->_errno = EINVAL;
- return -1;
- }
-
- // Search for the file on the disc
- if (!_FAT_directory_entryFromPath (partition, &oldDirEntry, oldName, NULL)) {
- r->_errno = ENOENT;
- return -1;
- }
-
- // Make sure there is no existing file / directory with the new name
- if (_FAT_directory_entryFromPath (partition, &newDirEntry, newName, NULL)) {
- r->_errno = EEXIST;
- return -1;
- }
-
- // Create the new file entry
- // Get the directory it has to go in
- pathEnd = strrchr (newName, DIR_SEPARATOR);
- if (pathEnd == NULL) {
- // No path was specified
- dirCluster = partition->cwdCluster;
- pathEnd = newName;
- } else {
- // Path was specified -- get the right dirCluster
- // Recycling newDirEntry, since it needs to be recreated anyway
- if (!_FAT_directory_entryFromPath (partition, &newDirEntry, newName, pathEnd) ||
- !_FAT_directory_isDirectory(&newDirEntry)) {
- r->_errno = ENOTDIR;
- return -1;
- }
- dirCluster = _FAT_directory_entryGetCluster (newDirEntry.entryData);
- // Move the pathEnd past the last DIR_SEPARATOR
- pathEnd += 1;
- }
-
- // Copy the entry data
- memcpy (&newDirEntry, &oldDirEntry, sizeof(DIR_ENTRY));
-
- // Set the new name
- strncpy (newDirEntry.d_name, pathEnd, MAX_FILENAME_LENGTH - 1);
-
- // Write the new entry
- if (!_FAT_directory_addEntry (partition, &newDirEntry, dirCluster)) {
- r->_errno = ENOSPC;
- return -1;
- }
-
- // Remove the old entry
- if (!_FAT_directory_removeEntry (partition, &oldDirEntry)) {
- r->_errno = EIO;
- return -1;
- }
-
- // Flush any sectors in the disc cache
- if (!_FAT_cache_flush (partition->cache)) {
- r->_errno = EIO;
- return -1;
- }
-
- return 0;
-}
-
-int _FAT_hideAttrib_r (struct _reent *r, const char *name, u8 hide) {
- PARTITION* partition = NULL;
- DIR_ENTRY oldDirEntry;
- DIR_ENTRY newDirEntry;
- u32 dirCluster;
-
- // Get the partition this directory is on
- partition = _FAT_partition_getPartitionFromPath (name);
-
- if (partition == NULL) {
- r->_errno = ENODEV;
- return -1;
- }
-
- // Make sure we aren't trying to write to a read-only disc
- if (partition->readOnly) {
- r->_errno = EROFS;
- return -1;
- }
-
- // Move the path pointer to the start of the actual path
- if (strchr (name, ':') != NULL) {
- name = strchr (name, ':') + 1;
- }
- if (strchr (name, ':') != NULL) {
- r->_errno = EINVAL;
- return -1;
- }
-
- // Search for the file on the disc
- if (!_FAT_directory_entryFromPath (partition, &oldDirEntry, name, NULL)) {
- r->_errno = ENOENT;
- return -1;
- }
-
- // Create the new file entry
- // Get the directory it has to go in
- memcpy (&newDirEntry, &oldDirEntry, sizeof(DIR_ENTRY));
-
- // No path was specified
- dirCluster = partition->cwdCluster;
-
- // Remove the old entry hopefully doesn't screw things up...
- if (!_FAT_directory_removeEntry (partition, &oldDirEntry)) {
- r->_errno = EIO;
- return -1;
- }
-
- // Set the new attribute
- if(hide)
- newDirEntry.entryData[DIR_ENTRY_attributes] |= ATTRIB_HID;
- else
- newDirEntry.entryData[DIR_ENTRY_attributes] &= ~ATTRIB_HID;
-
- // Write the new entry
- if (!_FAT_directory_addEntry (partition, &newDirEntry, dirCluster)) {
- r->_errno = ENOSPC;
- return -1;
- }
-
- // Flush any sectors in the disc cache
- if (!_FAT_cache_flush (partition->cache)) {
- r->_errno = EIO;
- return -1;
- }
-
- return 0;
-}
-
-int _FAT_mkdir_r (struct _reent *r, const char *path, int mode) {
- PARTITION* partition = NULL;
- bool fileExists;
- DIR_ENTRY dirEntry;
- const char* pathEnd;
- u32 parentCluster, dirCluster;
- u8 newEntryData[DIR_ENTRY_DATA_SIZE];
-
- partition = _FAT_partition_getPartitionFromPath (path);
- if (partition == NULL) {
- r->_errno = ENODEV;
- return -1;
- }
-
- // Move the path pointer to the start of the actual path
- if (strchr (path, ':') != NULL) {
- path = strchr (path, ':') + 1;
- }
- if (strchr (path, ':') != NULL) {
- r->_errno = EINVAL;
- return -1;
- }
-
- // Search for the file/directory on the disc
- fileExists = _FAT_directory_entryFromPath (partition, &dirEntry, path, NULL);
-
- // Make sure it doesn't exist
- if (fileExists) {
- r->_errno = EEXIST;
- return -1;
- }
-
- if (partition->readOnly) {
- // We can't write to a read-only partition
- r->_errno = EROFS;
- return -1;
- }
-
- // Get the directory it has to go in
- pathEnd = strrchr (path, DIR_SEPARATOR);
- if (pathEnd == NULL) {
- // No path was specified
- parentCluster = partition->cwdCluster;
- pathEnd = path;
- } else {
- // Path was specified -- get the right parentCluster
- // Recycling dirEntry, since it needs to be recreated anyway
- if (!_FAT_directory_entryFromPath (partition, &dirEntry, path, pathEnd) ||
- !_FAT_directory_isDirectory(&dirEntry)) {
- r->_errno = ENOTDIR;
- return -1;
- }
- parentCluster = _FAT_directory_entryGetCluster (dirEntry.entryData);
- // Move the pathEnd past the last DIR_SEPARATOR
- pathEnd += 1;
- }
-
- // Create the entry data
- strncpy (dirEntry.d_name, pathEnd, MAX_FILENAME_LENGTH - 1);
- memset (dirEntry.entryData, 0, DIR_ENTRY_DATA_SIZE);
-
- // Set the creation time and date
- dirEntry.entryData[DIR_ENTRY_cTime_ms] = 0;
- u16_to_u8array (dirEntry.entryData, DIR_ENTRY_cTime, _FAT_filetime_getTimeFromRTC());
- u16_to_u8array (dirEntry.entryData, DIR_ENTRY_cDate, _FAT_filetime_getDateFromRTC());
-
- // Set the directory attribute
- dirEntry.entryData[DIR_ENTRY_attributes] = ATTRIB_DIR;
-
- // Get a cluster for the new directory
- dirCluster = _FAT_fat_linkFreeClusterCleared (partition, CLUSTER_FREE);
- if (dirCluster == CLUSTER_FREE) {
- // No space left on disc for the cluster
- r->_errno = ENOSPC;
- return -1;
- }
- u16_to_u8array (dirEntry.entryData, DIR_ENTRY_cluster, dirCluster);
- u16_to_u8array (dirEntry.entryData, DIR_ENTRY_clusterHigh, dirCluster >> 16);
-
- // Write the new directory's entry to it's parent
- if (!_FAT_directory_addEntry (partition, &dirEntry, parentCluster)) {
- r->_errno = ENOSPC;
- return -1;
- }
-
- // Create the dot entry within the directory
- memset (newEntryData, 0, DIR_ENTRY_DATA_SIZE);
- memset (newEntryData, ' ', 11);
- newEntryData[DIR_ENTRY_name] = '.';
- newEntryData[DIR_ENTRY_attributes] = ATTRIB_DIR;
- u16_to_u8array (newEntryData, DIR_ENTRY_cluster, dirCluster);
- u16_to_u8array (newEntryData, DIR_ENTRY_clusterHigh, dirCluster >> 16);
-
- // Write it to the directory, erasing that sector in the process
- _FAT_cache_eraseWritePartialSector ( partition->cache, newEntryData,
- _FAT_fat_clusterToSector (partition, dirCluster), 0, DIR_ENTRY_DATA_SIZE);
-
-
- // Create the double dot entry within the directory
- newEntryData[DIR_ENTRY_name + 1] = '.';
- u16_to_u8array (newEntryData, DIR_ENTRY_cluster, parentCluster);
- u16_to_u8array (newEntryData, DIR_ENTRY_clusterHigh, parentCluster >> 16);
-
- // Write it to the directory
- _FAT_cache_writePartialSector ( partition->cache, newEntryData,
- _FAT_fat_clusterToSector (partition, dirCluster), DIR_ENTRY_DATA_SIZE, DIR_ENTRY_DATA_SIZE);
-
- // Flush any sectors in the disc cache
- if (!_FAT_cache_flush(partition->cache)) {
- r->_errno = EIO;
- return -1;
- }
-
- return 0;
-}
-
-DIR_STATE_STRUCT* _FAT_diropen_r(struct _reent *r, DIR_STATE_STRUCT *dirState, const char *path) {
- DIR_ENTRY dirEntry;
- DIR_STATE_STRUCT* state = dirState;
- bool fileExists;
- const char* root_path= "/";
-
- state->partition = _FAT_partition_getPartitionFromPath (path);
- if (state->partition == NULL) {
- r->_errno = ENODEV;
- return NULL;
- }
-
- // Move the path pointer to the start of the actual path
- if (strchr (path, ':') != NULL) {
- path = strchr (path, ':') + 1;
- }
- if (strchr (path, ':') != NULL) {
- r->_errno = EINVAL;
- return NULL;
- }
-
- if('\0' == path[0]) path = root_path;
-
- // Get the start cluster of the directory
- fileExists = _FAT_directory_entryFromPath (state->partition, &dirEntry, path, NULL);
- if (!fileExists) {
- r->_errno = ENOENT;
- return NULL;
- }
-
- // Make sure it is a directory
- if (! _FAT_directory_isDirectory (&dirEntry)) {
- r->_errno = ENOTDIR;
- return NULL;
- }
-
- // Save the start cluster for use when resetting the directory data
- state->startCluster = _FAT_directory_entryGetCluster (dirEntry.entryData);
-
- //Entry location pointer
- state->posEntry = 0;
-
-// // Get the first entry for use with a call to dirnext
-// state->validEntry =
-// _FAT_directory_getFirstEntry (state->partition, &(state->currentEntry), state->startCluster);
- state->validEntry = false;
-
- // We are now using this entry
- state->inUse = true;
- return state;
-}
-
-int _FAT_dirreset_r (struct _reent *r, DIR_STATE_STRUCT *dirState) {
- DIR_STATE_STRUCT* state = dirState;
-
- // Make sure we are still using this entry
- if (!state->inUse) {
- r->_errno = EBADF;
- return -1;
- }
-
- // Get the first entry for use with a call to dirnext
-// state->validEntry =
-// _FAT_directory_getFirstEntry (state->partition, &(state->currentEntry), state->startCluster);
-
- state->posEntry = 0;
-
- return 0;
-}
-
-int _FAT_dirnext_r (struct _reent *r, DIR_STATE_STRUCT *dirState, struct stat *filestat) {
- DIR_STATE_STRUCT* state = dirState;
-
- // Make sure we are still using this entry
- if (!state->inUse) {
- r->_errno = EBADF;
- return -1;
- }
-
- // Make sure there is another file to report on
-// if (!state->validEntry) {
-// r->_errno = ENOENT;
-// return -1;
-// }
-
- if(0 == state->posEntry) {
- state->validEntry = _FAT_directory_getFirstEntry (state->partition, &(state->currentEntry), state->startCluster);
- }
- else
- state->validEntry = _FAT_directory_getNextEntry (state->partition, &(state->currentEntry));
-
- state->posEntry += 1;
-
- if(!state->validEntry)
- {
- r->_errno = ENOENT;
- return -1;
- }
-
- if (filestat != NULL) {
- _FAT_directory_entryStat (state->partition, &(state->currentEntry), filestat);
- }
-
- return 0;
-/*
- // Get the filename
- strncpy (filename, state->currentEntry.d_name, MAX_FILENAME_LENGTH);
- // Get the stats, if requested
- if (filestat != NULL) {
- _FAT_directory_entryStat (state->partition, &(state->currentEntry), filestat);
- }
-
- // Look for the next entry for use next time
- state->validEntry =
- _FAT_directory_getNextEntry (state->partition, &(state->currentEntry));
-
- return 0;
-*/
-}
-
-int _FAT_dirclose_r (struct _reent *r, DIR_STATE_STRUCT *dirState) {
- DIR_STATE_STRUCT* state = dirState;
-
- // We are no longer using this entry
- state->inUse = false;
-
- return 0;
-}
diff --git a/sdk-modifications/libsrc/fs/fatdir.h b/sdk-modifications/libsrc/fs/fatdir.h deleted file mode 100755 index 7c419ee..0000000 --- a/sdk-modifications/libsrc/fs/fatdir.h +++ /dev/null @@ -1,85 +0,0 @@ -/* - fatdir.h - - Functions used by the newlib disc stubs to interface with - this library - - Copyright (c) 2006 Michael "Chishm" Chisholm - - Redistribution and use in source and binary forms, with or without modification, - are permitted provided that the following conditions are met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - 2. Redistributions in binary form must reproduce the above copyright notice, - this list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. - 3. The name of the author may not be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED - WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY - AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - - 2006-08-13 - Chishm - * Moved all externally visible directory related functions to fatdir - * Added _FAT_mkdir_r - - 2006-08-14 - Chishm - * Added directory iterator functions - - 2007-01-10 - Chishm - * Updated directory iterator functions for DevkitPro r20 -*/ - - -#ifndef _FATDIR_H -#define _FATDIR_H - -//#include <sys/reent.h> -#include <sys/stat.h> -//#include <sys/iosupport.h> -#include "fs_common.h" -#include "directory.h" - -typedef struct { - PARTITION* partition; - DIR_ENTRY currentEntry; - u32 startCluster; - u32 posEntry; - bool inUse; - bool validEntry; -} DIR_STATE_STRUCT; - -extern int _FAT_stat_r (struct _reent *r, const char *path, struct stat *st); - -extern int _FAT_link_r (struct _reent *r, const char *existing, const char *newLink); - -extern int _FAT_unlink_r (struct _reent *r, const char *name); - -extern int _FAT_chdir_r (struct _reent *r, const char *name); - -extern int _FAT_rename_r (struct _reent *r, const char *oldName, const char *newName); - -extern int _FAT_getshortname_r (struct _reent *r, const char *name, char *outName); - -extern int _FAT_hideAttrib_r (struct _reent *r, const char *name, u8 hide); - -extern int _FAT_mkdir_r (struct _reent *r, const char *path, int mode); - -/* -Directory iterator functions -*/ -extern DIR_STATE_STRUCT* _FAT_diropen_r(struct _reent *r, DIR_STATE_STRUCT *dirState, const char *path); -extern int _FAT_dirreset_r (struct _reent *r, DIR_STATE_STRUCT *dirState); -extern int _FAT_dirnext_r (struct _reent *r, DIR_STATE_STRUCT *dirState, struct stat *filestat); -extern int _FAT_dirclose_r (struct _reent *r, DIR_STATE_STRUCT *dirState); - - -#endif // _FATDIR_H diff --git a/sdk-modifications/libsrc/fs/fatdir_ex.c b/sdk-modifications/libsrc/fs/fatdir_ex.c deleted file mode 100755 index b773255..0000000 --- a/sdk-modifications/libsrc/fs/fatdir_ex.c +++ /dev/null @@ -1,183 +0,0 @@ -#include <string.h> -
-#include <errno.h>
- -#include <ctype.h>
- -#include <unistd.h>
- -#include <sys/dir.h> -
- -#include "fatdir.h"
- -#include "fatdir_ex.h"
- - -#include "cache.h" -
-#include "file_allocation_table.h" -
-#include "partition.h"
- -#include "directory.h"
- -#include "bit_ops.h"
- -#include "filetime.h"
- -#include "unicode/unicode.h"
-
-int dirnextl (DIR_ITER *dirState, char *filename, char *longFilename, struct stat *filestat)
-{
- DIR_STATE_STRUCT* state = (DIR_STATE_STRUCT*) (dirState->dirStruct); -
-
- // Make sure we are still using this entry -
- if (!state->inUse) { -
- errno = EBADF;
- return -1; -
- } -
-
- // Make sure there is another file to report on -
- if (! state->validEntry) {
- errno = ENOENT; -
- return -1; -
- } - -
- // Get the filename -
- strncpy (filename, state->currentEntry.d_name, MAX_FILENAME_LENGTH); -
- // Get long filename
- _FAT_unicode_unicode_to_local( state->currentEntry.unicodeFilename, (u8 *)longFilename );
-
- - // Get the stats, if requested -
- if (filestat != NULL) { -
- _FAT_directory_entryStat (state->partition, &(state->currentEntry), filestat); -
- } -
-
- // Look for the next entry for use next time -
- state->validEntry = -_FAT_directory_getNextEntry (state->partition, &(state->currentEntry)); - -
- return 0;
-}
-
-int renamex( const char *oldName, const char *newName )
-{
- PARTITION* partition = NULL;
- DIR_ENTRY oldDirEntry;
- DIR_ENTRY newDirEntry;
- const char *pathEnd;
- u32 dirCluster;
-
- // Get the partition this directory is on
- partition = _FAT_partition_getPartitionFromPath (oldName);
-
- if (partition == NULL) {
- errno = ENODEV;
- return -1;
- }
-
- // Make sure the same partition is used for the old and new names
- if (partition != _FAT_partition_getPartitionFromPath (newName)) {
- errno = EXDEV;
- return -1;
- }
-
- // Make sure we aren't trying to write to a read-only disc
- if (partition->readOnly) {
- errno = EROFS;
- return -1;
- }
-
- // Move the path pointer to the start of the actual path
- if (strchr (oldName, ':') != NULL) {
- oldName = strchr (oldName, ':') + 1;
- }
- if (strchr (oldName, ':') != NULL) {
- errno = EINVAL;
- return -1;
- }
- if (strchr (newName, ':') != NULL) {
- newName = strchr (newName, ':') + 1;
- }
- if (strchr (newName, ':') != NULL) {
- errno = EINVAL;
- return -1;
- }
-
- // Search for the file on the disc
- if (!_FAT_directory_entryFromPath (partition, &oldDirEntry, oldName, NULL)) {
- errno = ENOENT;
- return -1;
- }
-
- // Make sure there is no existing file / directory with the new name
- if (_FAT_directory_entryFromPath (partition, &newDirEntry, newName, NULL)) {
- errno = EEXIST;
- return -1;
- }
-
- // Create the new file entry
- // Get the directory it has to go in
- pathEnd = strrchr (newName, DIR_SEPARATOR);
- if (pathEnd == NULL) {
- // No path was specified
- dirCluster = partition->cwdCluster;
- pathEnd = newName;
- } else {
- // Path was specified -- get the right dirCluster
- // Recycling newDirEntry, since it needs to be recreated anyway
- if (!_FAT_directory_entryFromPath (partition, &newDirEntry, newName, pathEnd) ||
- !_FAT_directory_isDirectory(&newDirEntry)) {
- errno = ENOTDIR;
- return -1;
- }
- dirCluster = _FAT_directory_entryGetCluster (newDirEntry.entryData);
- // Move the pathEnd past the last DIR_SEPARATOR
- pathEnd += 1;
- }
-
- // Copy the entry data
- memcpy (&newDirEntry, &oldDirEntry, sizeof(DIR_ENTRY));
-
- // Set the new name
- strncpy (newDirEntry.d_name, pathEnd, MAX_FILENAME_LENGTH - 1);
-
- // Write the new entry
- if (!_FAT_directory_addEntry (partition, &newDirEntry, dirCluster)) {
- errno = ENOSPC;
- return -1;
- }
-
- // Remove the old entry
- if (!_FAT_directory_removeEntry (partition, &oldDirEntry)) {
- errno = EIO;
- return -1;
- }
-
- // Flush any sectors in the disc cache
- if (!_FAT_cache_flush (partition->cache)) {
- errno = EIO;
- return -1;
- }
-
- return 0;
-}
diff --git a/sdk-modifications/libsrc/fs/fatdir_ex.h b/sdk-modifications/libsrc/fs/fatdir_ex.h deleted file mode 100755 index fbac46f..0000000 --- a/sdk-modifications/libsrc/fs/fatdir_ex.h +++ /dev/null @@ -1,18 +0,0 @@ -#ifndef _FATDIR_EX_H_
-#define _FATDIR_EX_H_
- -#include "fatdir.h" -
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-int dirnextl (DIR_ITER *dirState, char *filename, char *longFilename, struct stat *filestat);
-int renamex( const char *oldName, const char *newName );
-
-#ifdef __cplusplus
-}
-#endif
-
-
-#endif//_FATDIR_EX_H_
diff --git a/sdk-modifications/libsrc/fs/fatfile.c b/sdk-modifications/libsrc/fs/fatfile.c deleted file mode 100755 index 304da34..0000000 --- a/sdk-modifications/libsrc/fs/fatfile.c +++ /dev/null @@ -1,889 +0,0 @@ -/*
- fatfile.c
-
- Functions used by the newlib disc stubs to interface with
- this library
-
- Copyright (c) 2006 Michael "Chishm" Chisholm
-
- Redistribution and use in source and binary forms, with or without modification,
- are permitted provided that the following conditions are met:
-
- 1. Redistributions of source code must retain the above copyright notice,
- this list of conditions and the following disclaimer.
- 2. Redistributions in binary form must reproduce the above copyright notice,
- this list of conditions and the following disclaimer in the documentation and/or
- other materials provided with the distribution.
- 3. The name of the author may not be used to endorse or promote products derived
- from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
- WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
- EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
- 2006-07-11 - Chishm
- * Original release
-
- 2006-07-17 - Chishm
- * Made all path inputs const char*
- * Added _FAT_rename_r
-
- 2006-08-02 - Chishm
- * Fixed _FAT_seek_r
-
- 2006-08-13 - Chishm
- * Moved all externally visible directory related functions to fatdir
-*/
-//version 1.12
-
-#include "fatfile.h"
-
-#include <fcntl.h>
-#include <string.h>
-#include <errno.h>
-#include <ctype.h>
-#include <unistd.h>
-
-#include "fs_cache.h"
-#include "file_allocation_table.h"
-#include "bit_ops.h"
-#include "filetime.h"
-
-
-int _FAT_open_r (struct _reent *r, void *fileStruct, const char *path, int flags) {
- PARTITION* partition = NULL;
- bool fileExists;
- DIR_ENTRY dirEntry;
- const char* pathEnd;
- u32 dirCluster;
- FILE_STRUCT* file = (FILE_STRUCT*) fileStruct;
-
-
-
- partition = _FAT_partition_getPartitionFromPath (path);
-
- if (partition == NULL) {
- r->_errno = ENODEV;
- return -1;
- }
-
-
- // Move the path pointer to the start of the actual path
- if (strchr (path, ':') != NULL) {
- path = strchr (path, ':') + 1;
- }
- if (strchr (path, ':') != NULL) {
- r->_errno = EINVAL;
- return -1;
- }
-
- // Determine which mode the file is openned for
- if ((flags & 0x03) == O_RDONLY) {
- // Open the file for read-only access
- file->read = true;
- file->write = false;
- file->append = false;
- } else if ((flags & 0x03) == O_WRONLY) {
- // Open file for write only access
- file->read = false;
- file->write = true;
- file->append = false;
- } else if ((flags & 0x03) == O_RDWR) {
- // Open file for read/write access
- file->read = true;
- file->write = true;
- file->append = false;
- } else {
- r->_errno = EACCES;
- return -1;
- }
-
- // Make sure we aren't trying to write to a read-only disc
- if (file->write && partition->readOnly) {
- r->_errno = EROFS;
- return -1;
- }
-
- // Search for the file on the disc
- fileExists = _FAT_directory_entryFromPath (partition, &dirEntry, path, NULL);
-
- // The file shouldn't exist if we are trying to create it
- if ((flags & O_CREAT) && (flags & O_EXCL) && fileExists) {
- r->_errno = EEXIST;
- return -1;
- }
-
- // It should not be a directory if we're openning a file,
- if (fileExists && _FAT_directory_isDirectory(&dirEntry)) {
- r->_errno = EISDIR;
- return -1;
- }
- // If the file doesn't exist, create it if we're allowed to
- if (!fileExists) {
- if (flags & O_CREAT) {
- if (partition->readOnly) {
- // We can't write to a read-only partition
- r->_errno = EROFS;
- return -1;
- }
- // Create the file
- // Get the directory it has to go in
- pathEnd = strrchr (path, DIR_SEPARATOR);
- if (pathEnd == NULL) {
- // No path was specified
- dirCluster = partition->cwdCluster;
- pathEnd = path;
- } else {
- // Path was specified -- get the right dirCluster
- // Recycling dirEntry, since it needs to be recreated anyway
- if (!_FAT_directory_entryFromPath (partition, &dirEntry, path, pathEnd) ||
- !_FAT_directory_isDirectory(&dirEntry)) {
- r->_errno = ENOTDIR;
- return -1;
- }
- dirCluster = _FAT_directory_entryGetCluster (dirEntry.entryData);
- // Move the pathEnd past the last DIR_SEPARATOR
- pathEnd += 1;
- }
- // Create the entry data
- strncpy (dirEntry.d_name, pathEnd, MAX_FILENAME_LENGTH - 1);
- memset (dirEntry.entryData, 0, DIR_ENTRY_DATA_SIZE);
-
- // Set the creation time and date
- dirEntry.entryData[DIR_ENTRY_cTime_ms] = 0;
- u16_to_u8array (dirEntry.entryData, DIR_ENTRY_cTime, _FAT_filetime_getTimeFromRTC());
- u16_to_u8array (dirEntry.entryData, DIR_ENTRY_cDate, _FAT_filetime_getDateFromRTC());
-
- if (!_FAT_directory_addEntry (partition, &dirEntry, dirCluster)) {
- r->_errno = ENOSPC;
- return -1;
- }
- } else {
- // file doesn't exist, and we aren't creating it
- r->_errno = ENOENT;
- return -1;
- }
- }
-
- file->filesize = u8array_to_u32 (dirEntry.entryData, DIR_ENTRY_fileSize);
- /* Allow LARGEFILEs with undefined results
- // Make sure that the file size can fit in the available space
- if (!(flags & O_LARGEFILE) && (file->filesize >= (1<<31))) {
- r->_errno = EFBIG;
- return -1;
- }
- */
-
- // Make sure we aren't trying to write to a read-only file
- if (file->write && !_FAT_directory_isWritable(&dirEntry)) {
- r->_errno = EROFS;
- return -1;
- }
-
- // Associate this file with a particular partition
- file->partition = partition;
- file->startCluster = _FAT_directory_entryGetCluster (dirEntry.entryData);
-
- // Truncate the file if requested
- if ((flags & O_TRUNC) && file->write && (file->startCluster != 0)) {
- _FAT_fat_clearLinks (partition, file->startCluster);
- file->startCluster = 0;
- file->filesize = 0;
- }
-
- // Get a new cluster for the file if required
- if (file->startCluster == 0) {
- file->startCluster = _FAT_fat_linkFreeCluster (partition, CLUSTER_FREE);
- }
-
- // Remember the position of this file's directory entry
- file->dirEntryStart = dirEntry.dataStart; // Points to the start of the LFN entries of a file, or the alias for no LFN
- file->dirEntryEnd = dirEntry.dataEnd;
-
- file->currentPosition = 0;
-
- file->rwPosition.cluster = file->startCluster;
- file->rwPosition.sector = 0;
- file->rwPosition.byte = 0;
-
-
- if (flags & O_APPEND) {
- file->append = true;
- file->appendPosition.cluster = _FAT_fat_lastCluster (partition, file->startCluster);
- file->appendPosition.sector = (file->filesize % partition->bytesPerCluster) / BYTES_PER_READ;
- file->appendPosition.byte = file->filesize % BYTES_PER_READ;
-
- // Check if the end of the file is on the end of a cluster
- if ( (file->filesize > 0) && ((file->filesize % partition->bytesPerCluster)==0) ){
- // Set flag to allocate a new cluster
- file->appendPosition.sector = partition->sectorsPerCluster;
- file->appendPosition.byte = 0;
- }
- } else{
- file->append = false;
- file->appendPosition = file->rwPosition;
- }
-
- file->inUse = true;
-
- partition->openFileCount += 1;
-
- return (int) file;
-}
-
-int _FAT_close_r (struct _reent *r, int fd) {
- FILE_STRUCT* file = (FILE_STRUCT*) fd;
- u8 dirEntryData[DIR_ENTRY_DATA_SIZE];
-
- if (!file->inUse) {
- r->_errno = EBADF;
- return -1;
- }
- if (file->write) {
- // Load the old entry
- _FAT_cache_readPartialSector (file->partition->cache, dirEntryData,
- _FAT_fat_clusterToSector(file->partition, file->dirEntryEnd.cluster) + file->dirEntryEnd.sector,
- file->dirEntryEnd.offset * DIR_ENTRY_DATA_SIZE, DIR_ENTRY_DATA_SIZE);
-
- // Write new data to the directory entry
- // File size
- u32_to_u8array (dirEntryData, DIR_ENTRY_fileSize, file->filesize);
-
- // Start cluster
- u16_to_u8array (dirEntryData, DIR_ENTRY_cluster, file->startCluster);
- u16_to_u8array (dirEntryData, DIR_ENTRY_clusterHigh, file->startCluster >> 16);
-
- // Modification time and date
- u16_to_u8array (dirEntryData, DIR_ENTRY_mTime, _FAT_filetime_getTimeFromRTC());
- u16_to_u8array (dirEntryData, DIR_ENTRY_mDate, _FAT_filetime_getDateFromRTC());
-
- // Access date
- u16_to_u8array (dirEntryData, DIR_ENTRY_aDate, _FAT_filetime_getDateFromRTC());
-
- // Write the new entry
- _FAT_cache_writePartialSector (file->partition->cache, dirEntryData,
- _FAT_fat_clusterToSector(file->partition, file->dirEntryEnd.cluster) + file->dirEntryEnd.sector,
- file->dirEntryEnd.offset * DIR_ENTRY_DATA_SIZE, DIR_ENTRY_DATA_SIZE);
-
- // Flush any sectors in the disc cache
- if (!_FAT_cache_flush(file->partition->cache)) {
- r->_errno = EIO;
- return -1;
- }
- }
-
- file->inUse = false;
- file->partition->openFileCount -= 1;
-
- return 0;
-}
-
-int _FAT_read_r (struct _reent *r, int fd, char *ptr, int len) {
- FILE_STRUCT* file = (FILE_STRUCT*) fd;
- PARTITION* partition;
- CACHE* cache;
-
- FILE_POSITION position;
- u32 tempNextCluster;
-
- int tempVar;
-
- u32 remain;
-
- bool flagNoError = true;
-
- // Make sure we can actually read from the file
- if ((file == NULL) || !file->inUse || !file->read) {
- r->_errno = EBADF;
- return 0;
- }
-
- // Don't try to read if the read pointer is past the end of file
- if (file->currentPosition >= file->filesize) {
- return 0;
- }
-
- // Don't read past end of file
- if (len + file->currentPosition > file->filesize) {
- r->_errno = EOVERFLOW;
- len = file->filesize - file->currentPosition;
- }
-
- remain = len; //Assume len > 0
-
- position = file->rwPosition;
-
- partition = file->partition;
- cache = file->partition->cache;
-
- // Move onto next cluster if needed
- if (position.sector >= partition->sectorsPerCluster) {
- tempNextCluster = _FAT_fat_nextCluster(partition, position.cluster);
- if (tempNextCluster == CLUSTER_EOF) {
- position.sector = partition->sectorsPerCluster;
- } else if (tempNextCluster == CLUSTER_FREE) {
- r->_errno = EIO;
- return 0;
- } else {
- position.sector = 0;
- position.cluster = tempNextCluster;
- }
- }
-
- // Align to sector
- tempVar = BYTES_PER_READ - position.byte;
- if (tempVar > remain) {
- tempVar = remain;
- }
-
- if (tempVar < BYTES_PER_READ)
- {
- _FAT_cache_readPartialSector ( cache, ptr, _FAT_fat_clusterToSector (partition, position.cluster) + position.sector,
- position.byte, tempVar);
-
- remain -= tempVar;
- ptr += tempVar;
-
- position.byte += tempVar;
- if (position.byte >= BYTES_PER_READ) {
- position.byte = 0;
- position.sector++;
- }
- }
-
- // Align to cluster
- //remaining more than 1 sector and read part of cluster
- if((remain >= BYTES_PER_READ) && (position.sector < partition->sectorsPerCluster))
- {
- // tempVar is number of sectors to write
- tempVar = remain / BYTES_PER_READ;
- if(tempVar > (partition->sectorsPerCluster - position.sector))
- tempVar = partition->sectorsPerCluster - position.sector;
-
- // read several sectors from disk
- _FAT_disc_readSectors (partition->disc, _FAT_fat_clusterToSector (partition, position.cluster) + position.sector,
- tempVar, ptr);
-
- ptr += tempVar * BYTES_PER_READ;
- remain -= tempVar * BYTES_PER_READ;
- position.sector += tempVar;
- }
-
- // Move onto next cluster
- // It should get to here without reading anything if a cluster is due to be allocated
- if ((remain>0) && (position.sector >= partition->sectorsPerCluster)) {
- tempNextCluster = _FAT_fat_nextCluster(partition, position.cluster);
- if (tempNextCluster == CLUSTER_EOF) {
- position.sector = partition->sectorsPerCluster;
- } else if (tempNextCluster == CLUSTER_FREE) {
- r->_errno = EIO;
- flagNoError = false;
- } else {
- position.sector = 0;
- position.cluster = tempNextCluster;
- }
- }
-
- // Read in whole clusters
- while ((remain >= partition->bytesPerCluster) && flagNoError) {
- _FAT_disc_readSectors (partition->disc, _FAT_fat_clusterToSector (partition, position.cluster), partition->sectorsPerCluster, ptr);
- ptr += partition->bytesPerCluster;
- remain -= partition->bytesPerCluster;
-
- // Advance to next cluster
- tempNextCluster = _FAT_fat_nextCluster(partition, position.cluster);
- if ((remain == 0) && (tempNextCluster == CLUSTER_EOF)) {
- position.sector = partition->sectorsPerCluster;
- } else if (tempNextCluster == CLUSTER_FREE) {
- r->_errno = EIO;
- flagNoError = false;
- } else {
- position.sector = 0;
- position.cluster = tempNextCluster;
- }
- }
-
- // Read remaining sectors
- tempVar = remain / BYTES_PER_READ; // Number of sectors left
- if ((tempVar > 0) && flagNoError) {
- _FAT_disc_readSectors (partition->disc, _FAT_fat_clusterToSector (partition, position.cluster),
- tempVar, ptr);
- ptr += tempVar * BYTES_PER_READ;
- remain -= tempVar * BYTES_PER_READ;
- position.sector += tempVar;
- }
-
- // Last remaining sector
- // Check if anything is left
- if ((remain > 0) && flagNoError) {
- _FAT_cache_readPartialSector ( cache, ptr,
- _FAT_fat_clusterToSector (partition, position.cluster) + position.sector, 0, remain);
- position.byte += remain;
- remain = 0;
- }
-
- // Length read is the wanted length minus the stuff not read
- len = len - remain;
-
- // Update file information
- file->rwPosition = position;
- file->currentPosition += len;
-
- return len;
-}
-
-/*
-Extend a file so that the size is the same as the rwPosition
-*/
-static bool file_extend_r (struct _reent *r, FILE_STRUCT* file) {
- PARTITION* partition = file->partition;
- CACHE* cache = file->partition->cache;
-
- FILE_POSITION position;
-
- u32 remain;
-
- u8 zeroBuffer [BYTES_PER_READ] = {0};
-
- u32 tempNextCluster;
-
- position.byte = file->filesize % BYTES_PER_READ;
-
- u32 partCluster = file->filesize % partition->bytesPerCluster;
- if(0 == partCluster && 0 != file->filesize) //integer cluster
- partCluster = partition->bytesPerCluster;
- //position.sector = (file->filesize % partition->bytesPerCluster) / BYTES_PER_READ;
- position.sector = partCluster / BYTES_PER_READ;
-
- //This function index the last Cluster currently used, when file size equal Cluster size, will cause problem
- position.cluster = _FAT_fat_lastCluster (partition, file->startCluster);
-
- remain = file->currentPosition - file->filesize;
-
- // Move onto next cluster if needed
- if (position.sector >= partition->sectorsPerCluster) {
- //Because _FAT_fat_lastCluster point to the last cluster currently used, so
- //position.sector == partition->sectorsPerCluster means, the last cluster all used
- //move to next cluster
- position.sector = 0;
- tempNextCluster = _FAT_fat_nextCluster(partition, position.cluster);
- if ((tempNextCluster == CLUSTER_EOF) || (tempNextCluster == CLUSTER_FREE)) {
- // Ran out of clusters so get a new one
- tempNextCluster = _FAT_fat_linkFreeCluster(partition, position.cluster);
- }
- if (tempNextCluster == CLUSTER_FREE) {
- // Couldn't get a cluster, so abort
- r->_errno = ENOSPC;
- return false;
- } else {
- position.cluster = tempNextCluster;
- }
- }
-
- // Only need to clear to the end of the sector
- if (remain + position.byte < BYTES_PER_READ) {
- _FAT_cache_writePartialSector (cache, zeroBuffer,
- _FAT_fat_clusterToSector (partition, position.cluster) + position.sector, position.byte, remain);
- position.byte += remain;
- } else {
- if (position.byte > 0) {
- _FAT_cache_writePartialSector (cache, zeroBuffer,
- _FAT_fat_clusterToSector (partition, position.cluster) + position.sector, position.byte,
- BYTES_PER_READ - position.byte);
- remain -= (BYTES_PER_READ - position.byte);
- position.byte = 0;
- position.sector ++;
- }
-
- while (remain >= BYTES_PER_READ) {
- if (position.sector >= partition->sectorsPerCluster) {
- position.sector = 0;
- tempNextCluster = _FAT_fat_nextCluster(partition, position.cluster);
- if ((tempNextCluster == CLUSTER_EOF) || (tempNextCluster == CLUSTER_FREE)) {
- // Ran out of clusters so get a new one
- tempNextCluster = _FAT_fat_linkFreeCluster(partition, position.cluster);
- }
- if (tempNextCluster == CLUSTER_FREE) {
- // Couldn't get a cluster, so abort
- r->_errno = ENOSPC;
- return false;
- } else {
- position.cluster = tempNextCluster;
- }
- }
-
- _FAT_disc_writeSectors (partition->disc,
- _FAT_fat_clusterToSector (partition, position.cluster) + position.sector, 1, zeroBuffer);
- //cancel the dirty state of cahced sctor, not necessary here, the sector haven't allocated yet
- //_FAT_cache_writePartialSector_check(cache,
- // _FAT_fat_clusterToSector (partition, position.cluster) + position.sector, 1, zeroBuffer);
-
- remain -= BYTES_PER_READ;
- position.sector ++;
- }
-
- if (position.sector >= partition->sectorsPerCluster) {
- position.sector = 0;
- tempNextCluster = _FAT_fat_nextCluster(partition, position.cluster);
- if ((tempNextCluster == CLUSTER_EOF) || (tempNextCluster == CLUSTER_FREE)) {
- // Ran out of clusters so get a new one
- tempNextCluster = _FAT_fat_linkFreeCluster(partition, position.cluster);
- }
- if (tempNextCluster == CLUSTER_FREE) {
- // Couldn't get a cluster, so abort
- r->_errno = ENOSPC;
- return false;
- } else {
- position.cluster = tempNextCluster;
- }
- }
-
- if (remain > 0) {
- _FAT_cache_writePartialSector (cache, zeroBuffer,
- _FAT_fat_clusterToSector (partition, position.cluster) + position.sector, 0, remain);
- position.byte = remain;
- }
- }
-
- file->rwPosition = position;
- file->filesize = file->currentPosition;
- return true;
-}
-
-
-int _FAT_write_r (struct _reent *r,int fd, const char *ptr, int len) {
- FILE_STRUCT* file = (FILE_STRUCT*) fd;
-
- PARTITION* partition;
- CACHE* cache;
-
- FILE_POSITION position;
- u32 tempNextCluster;
-
- int tempVar;
-
- u32 remain;
-
- bool flagNoError = true;
- bool flagAppending = false;
-
- // Make sure we can actually write to the file
- if ((file == NULL) || !file->inUse || !file->write) {
- r->_errno = EBADF;
- return -1;
- }
-
- partition = file->partition;
- cache = file->partition->cache;
- remain = len;
-
- if (file->append) {
- position = file->appendPosition;
- flagAppending = true;
- } else {
- // If the write pointer is past the end of the file, extend the file to that size,
- // the extended area set to zero
- if (file->currentPosition > file->filesize) { //This may accure when fseek called before
- if (!file_extend_r (r, file)) { //the function have done Cluster moving
- return 0;
- }
- }
-
- // Write at current read pointer
- position = file->rwPosition;
-
- // If it is writing past the current end of file, set appending flag
- if (len + file->currentPosition > file->filesize) {
- flagAppending = true;
- }
- }
-
- // Move onto next cluster if needed
- if (position.sector >= partition->sectorsPerCluster) {
- position.sector = 0;
- tempNextCluster = _FAT_fat_nextCluster(partition, position.cluster);
- if ((tempNextCluster == CLUSTER_EOF) || (tempNextCluster == CLUSTER_FREE)) {
- // Ran out of clusters so get a new one
- tempNextCluster = _FAT_fat_linkFreeCluster(partition, position.cluster);
- }
- if (tempNextCluster == CLUSTER_FREE) {
- // Couldn't get a cluster, so abort
- r->_errno = ENOSPC;
- flagNoError = false;
- } else {
- position.cluster = tempNextCluster;
- }
- }
-
- // Align to sector
- if(flagNoError && (position.byte > 0))
- {
- tempVar = BYTES_PER_READ - position.byte;
- if (tempVar > remain) {
- tempVar = remain;
- }
-
- // Write partial sector to disk
- _FAT_cache_writePartialSector (cache, ptr,
- _FAT_fat_clusterToSector (partition, position.cluster) + position.sector, position.byte, tempVar);
-
- remain -= tempVar;
- ptr += tempVar;
- position.byte += tempVar;
-
- // Move onto next sector
- if (position.byte >= BYTES_PER_READ) {
- position.byte = 0;
- position.sector ++; //here may be needed move to next cluster
- }
- }
-
- // Align to cluster
- //remaining more than 1 sector and used part of cluster
- if(flagNoError && (remain >= BYTES_PER_READ) && (position.sector < partition->sectorsPerCluster))
- {
- // tempVar is number of sectors to write
- tempVar = remain / BYTES_PER_READ;
- if(tempVar > (partition->sectorsPerCluster - position.sector))
- tempVar = partition->sectorsPerCluster - position.sector;
-
- // write several sectors to disk
- _FAT_disc_writeSectors (partition->disc,
- _FAT_fat_clusterToSector (partition, position.cluster) + position.sector, tempVar, ptr);
- //cancel the dirty state of cached sctor
- _FAT_cache_writePartialSector_check(cache,
- _FAT_fat_clusterToSector (partition, position.cluster) + position.sector, tempVar, ptr);
-
- ptr += tempVar * BYTES_PER_READ;
- remain -= tempVar * BYTES_PER_READ;
- position.sector += tempVar;
- }
-
- // Move onto next cluster if needed
- if (flagNoError && (position.sector >= partition->sectorsPerCluster) && (remain > 0)) {
- position.sector = 0;
- tempNextCluster = _FAT_fat_nextCluster(partition, position.cluster);
- if ((tempNextCluster == CLUSTER_EOF) || (tempNextCluster == CLUSTER_FREE)) {
- // Ran out of clusters so get a new one
- tempNextCluster = _FAT_fat_linkFreeCluster(partition, position.cluster);
- }
- if (tempNextCluster == CLUSTER_FREE) {
- // Couldn't get a cluster, so abort
- r->_errno = ENOSPC;
- flagNoError = false;
- } else {
- position.cluster = tempNextCluster;
- }
- }
-
- // Write whole clusters
- while ((remain >= partition->bytesPerCluster) && flagNoError) {
- _FAT_disc_writeSectors (partition->disc, _FAT_fat_clusterToSector(partition, position.cluster),
- partition->sectorsPerCluster, ptr);
- //cancel the dirty state of cahced sctor
- _FAT_cache_writePartialSector_check(cache, _FAT_fat_clusterToSector(partition, position.cluster),
- partition->sectorsPerCluster, ptr);
-
- ptr += partition->bytesPerCluster;
- remain -= partition->bytesPerCluster;
- if (remain > 0) {
- tempNextCluster = _FAT_fat_nextCluster(partition, position.cluster);
- if ((tempNextCluster == CLUSTER_EOF) || (tempNextCluster == CLUSTER_FREE)) {
- // Ran out of clusters so get a new one
- tempNextCluster = _FAT_fat_linkFreeCluster(partition, position.cluster);
- }
- if (tempNextCluster == CLUSTER_FREE) {
- // Couldn't get a cluster, so abort
- r->_errno = ENOSPC;
- flagNoError = false;
- } else {
- position.cluster = tempNextCluster;
- }
- } else {
- // Allocate a new cluster when next writing the file
- position.sector = partition->sectorsPerCluster;
- }
- }
-
- // Write remaining sectors
- // Number of sectors left
- tempVar = remain / BYTES_PER_READ;
- if ((tempVar > 0) && flagNoError) {
- _FAT_disc_writeSectors (partition->disc, _FAT_fat_clusterToSector (partition, position.cluster),
- tempVar, ptr);
- //cancel the dirty state of cahced sctor
- _FAT_cache_writePartialSector_check(cache, _FAT_fat_clusterToSector (partition, position.cluster),
- tempVar, ptr);
-
- ptr += tempVar * BYTES_PER_READ;
- remain -= tempVar * BYTES_PER_READ;
- position.sector += tempVar;
- }
-
- // Last remaining partial sector
- if ((remain > 0) && flagNoError) {
- if (flagAppending) {
- //allocated new sector, erasing remaing unused part
- //Actually, no necessary. when using fwrite to increase the file size, valid data area end at currentPosition
- //when using fseek to increase file size, valid data area end at rwPosition, the increased zero area will valid
- //at next fwrite, fread before this can not read out the increased zero area, the file size also not changed
- //before next fwrite called
- _FAT_cache_eraseWritePartialSector ( cache, ptr,
- _FAT_fat_clusterToSector (partition, position.cluster) + position.sector, 0, remain);
- } else {
- _FAT_cache_writePartialSector ( cache, ptr,
- _FAT_fat_clusterToSector (partition, position.cluster) + position.sector, 0, remain);
- }
- position.byte += remain;
- remain = 0;
- }
-
- // Amount read is the originally requested amount minus stuff remaining
- len = len - remain;
-
- // Update file information
- if (file->append) {
- // Appending doesn't affect the read pointer
- file->appendPosition = position;
- file->filesize += len;
- } else {
- // Writing also shifts the read pointer
- file->rwPosition = position;
- file->currentPosition += len;
- if (file->filesize < file->currentPosition) {
- file->filesize = file->currentPosition;
- }
- }
-
- return len;
-}
-
-#include "ds2io.h"
-int _FAT_seek_r (struct _reent *r, int fd, int pos, int dir) {
- FILE_STRUCT* file = (FILE_STRUCT*) fd;
-
- PARTITION* partition;
-
- u32 cluster, nextCluster;
- int clusCount;
- int position;
-
- if ((file == NULL) || (file->inUse == false)) {
- // invalid file
- r->_errno = EBADF;
- return -1;
- }
-
- partition = file->partition;
-
- switch (dir) {
- case SEEK_SET:
- position = pos;
- break;
- case SEEK_CUR:
- position = file->currentPosition + pos;
- break;
- case SEEK_END:
- position = file->filesize + pos;
- break;
- default:
- r->_errno = EINVAL;
- return -1;
- }
-
- if ((pos > 0) && (position < 0)) {
- r->_errno = EOVERFLOW;
- return -1;
- }
-
- if (position < 0) {
- r->_errno = EINVAL;
- return -1;
- }
-
- // Only change the read/write position if it is within or at the bounds of the current filesize
- if (file->filesize >= position) {
-
- // Calculate where the correct cluster is
- if (position >= file->currentPosition) {
- clusCount = (position / partition->bytesPerCluster) - (file->currentPosition / partition->bytesPerCluster);
- cluster = file->rwPosition.cluster;
- //When last reading, it stop at the cluster boundary,
- //file->rwPosition.sector == partition->bytesPerCluster, but
- //file->rwPosition.cluster did not move to next cluster
- if(file->rwPosition.sector >= partition->sectorsPerCluster)
- clusCount += 1;
- } else {
- clusCount = position / partition->bytesPerCluster;
- cluster = file->startCluster;
- }
-
- // Calculate the sector and byte of the current position, and store them
- file->rwPosition.sector = (position % partition->bytesPerCluster) / BYTES_PER_READ;
- file->rwPosition.byte = position % BYTES_PER_READ;
-
- nextCluster = _FAT_fat_nextCluster (partition, cluster);
- while ((clusCount > 0) && (nextCluster != CLUSTER_FREE) && (nextCluster != CLUSTER_EOF)) {
- clusCount--;
- cluster = nextCluster;
- nextCluster = _FAT_fat_nextCluster (partition, cluster);
- }
-
- // Check if ran out of clusters, and the file is being written to
- if ((clusCount > 0) && (file->write || file->append)) {
- // Set flag to allocate a new cluster
- file->rwPosition.sector = partition->sectorsPerCluster;
- file->rwPosition.byte = 0;
- }
-
- file->rwPosition.cluster = cluster;
- }
-
- // Save position
- file->currentPosition = position;
-
- return position;
-}
-
-
-
-int _FAT_fstat_r (struct _reent *r, int fd, struct stat *st) {
- FILE_STRUCT* file = (FILE_STRUCT*) fd;
-
- PARTITION* partition;
-
- DIR_ENTRY fileEntry;
-
- if ((file == NULL) || (file->inUse == false)) {
- // invalid file
- r->_errno = EBADF;
- return -1;
- }
-
- partition = file->partition;
-
- // Get the file's entry data
- fileEntry.dataStart = file->dirEntryStart;
- fileEntry.dataEnd = file->dirEntryEnd;
-
- if (!_FAT_directory_entryFromPosition (partition, &fileEntry)) {
- r->_errno = EIO;
- return -1;
- }
-
- // Fill in the stat struct
- _FAT_directory_entryStat (partition, &fileEntry, st);
-
- // Fix stats that have changed since the file was openned
- st->st_ino = (ino_t)(file->startCluster); // The file serial number is the start cluster
- st->st_size = file->filesize; // File size
-
- return 0;
-}
-
diff --git a/sdk-modifications/libsrc/fs/fatfile.h b/sdk-modifications/libsrc/fs/fatfile.h deleted file mode 100755 index 4869562..0000000 --- a/sdk-modifications/libsrc/fs/fatfile.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - fatfile.h - - Functions used by the newlib disc stubs to interface with - this library - - Copyright (c) 2006 Michael "Chishm" Chisholm - - Redistribution and use in source and binary forms, with or without modification, - are permitted provided that the following conditions are met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - 2. Redistributions in binary form must reproduce the above copyright notice, - this list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. - 3. The name of the author may not be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED - WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY - AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - - 2006-07-11 - Chishm - * Original release - - 2006-07-17 - Chishm - * Made all path inputs const char* - * Added _FAT_rename_r - - 2006-07-24 - Chishm - * Removed padding workaround from FILE_STRUCT - - 2006-08-13 - Chishm - * Moved all externally visible directory related functions to fatdir -*/ - - -#ifndef _FATFILE_H -#define _FATFILE_H - -//#include <sys/reent.h> -#include <sys/stat.h> - -#include "fs_common.h" -#include "partition.h" -#include "directory.h" - -typedef struct { - u32 cluster; - u32 sector; - s32 byte; -} FILE_POSITION; - -typedef struct { - int fd; - u32 filesize; - u32 startCluster; - u32 currentPosition; - FILE_POSITION rwPosition; - FILE_POSITION appendPosition; - bool read; - bool write; - bool append; - bool inUse; - PARTITION* partition; - DIR_ENTRY_POSITION dirEntryStart; // Points to the start of the LFN entries of a file, or the alias for no LFN - DIR_ENTRY_POSITION dirEntryEnd; // Always points to the file's alias entry -} FILE_STRUCT; - -extern int _FAT_open_r (struct _reent *r, void *fileStruct, const char *path, int flags); - -extern int _FAT_close_r (struct _reent *r, int fd); - -extern int _FAT_write_r (struct _reent *r,int fd, const char *ptr, int len); - -extern int _FAT_read_r (struct _reent *r, int fd, char *ptr, int len); - -extern int _FAT_seek_r (struct _reent *r, int fd,int pos, int dir); - -extern int _FAT_fstat_r (struct _reent *r, int fd, struct stat *st); - -#endif // _FATFILE_H diff --git a/sdk-modifications/libsrc/fs/fatfile_ex.c b/sdk-modifications/libsrc/fs/fatfile_ex.c deleted file mode 100755 index aa23fb3..0000000 --- a/sdk-modifications/libsrc/fs/fatfile_ex.c +++ /dev/null @@ -1,47 +0,0 @@ -#include <fcntl.h> -#include <string.h> -#include <errno.h> -#include <ctype.h> -#include <unistd.h> -#include <stdio.h> -#include <iorpg.h> - -#include "cache.h" -#include "file_allocation_table.h" -#include "bit_ops.h" -#include "filetime.h" -#include "fatfile.h"
- -// origin fread/fwrite do not take advantage of continuous read/write function of SD/NAND, -// it looks like the third parameter to _FAT_read_r()/_FAT_write_r() is a fixed '2' -// so they are much slower than these two.... - -// due to behavior of _FAT_read_r()/_FAT_write_r(), -// FAT should have a at least 8192 cluster size to get better performance, -// 16K or larger cluster size can get the best performance. - - - -int freadex( void * buffer, int _size, int _n, FILE * f ) -{ - if( 0 == _n ) - return 0; - dbg_printf("freadx %d\n", _n ); - struct _reent r; - int ret = _FAT_read_r( &r, (int)f->_file + 8, buffer, _size * _n ); - errno = r._errno; - return ret; -} - - -int fwriteex( const void * buffer, int _size, int _n, FILE * f ) -{ - if( 0 == _n ) - return 0; - dbg_printf("fwritex new %d\n", _n ); - struct _reent r; - int ret = _FAT_write_r( &r, (int)f->_file + 8, buffer, _size * _n ); - errno = r._errno; - return ret; -} - diff --git a/sdk-modifications/libsrc/fs/fatfile_ex.h b/sdk-modifications/libsrc/fs/fatfile_ex.h deleted file mode 100755 index c434b63..0000000 --- a/sdk-modifications/libsrc/fs/fatfile_ex.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef _FATFILE_EX_H_
-#define _FATFILE_EX_H_
- -#include <stdio.h> -#include "fatfile.h" -
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-int freadex( void * buffer, int _size, int _n, FILE * f );
-int fwritex( const void * buffer, int _size, int _n, FILE * f ); -
-#ifdef __cplusplus
-}
-#endif
-
-
-#endif//_FATFILE_EX_H_
diff --git a/sdk-modifications/libsrc/fs/file_allocation_table.c b/sdk-modifications/libsrc/fs/file_allocation_table.c deleted file mode 100644 index f382b52..0000000 --- a/sdk-modifications/libsrc/fs/file_allocation_table.c +++ /dev/null @@ -1,330 +0,0 @@ -/* - file_allocation_table.c - Reading, writing and manipulation of the FAT structure on - a FAT partition - - Copyright (c) 2006 Michael "Chishm" Chisholm - - Redistribution and use in source and binary forms, with or without modification, - are permitted provided that the following conditions are met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - 2. Redistributions in binary form must reproduce the above copyright notice, - this list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. - 3. The name of the author may not be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED - WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY - AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - - 2006-07-11 - Chishm - * Original release - - 2006-07-11 - Chishm - * Made several fixes related to free clusters, thanks to Loopy - - 2006-10-01 - Chishm - * Added _FAT_fat_linkFreeClusterCleared to clear a cluster when it is allocated -*/ - - -#include "file_allocation_table.h" -#include "partition.h" -#include <string.h> - -/* -Gets the cluster linked from input cluster -*/ -u32 _FAT_fat_nextCluster(PARTITION* partition, u32 cluster) -{ - u32 nextCluster = CLUSTER_FREE; - u32 sector; - int offset; - - switch (partition->filesysType) - { - case FS_UNKNOWN: - nextCluster = CLUSTER_FREE; - break; - - case FS_FAT12: - sector = partition->fat.fatStart + (((cluster * 3) / 2) / BYTES_PER_READ); - offset = ((cluster * 3) / 2) % BYTES_PER_READ; - - - _FAT_cache_readPartialSector (partition->cache, &nextCluster, sector, offset, sizeof(u8)); - - offset++; - - if (offset >= BYTES_PER_READ) { - offset = 0; - sector++; - } - - _FAT_cache_readPartialSector (partition->cache, ((u8*)&nextCluster) + sizeof(u8), sector, offset, sizeof(u8)); - - if (cluster & 0x01) { - nextCluster = nextCluster >> 4; - } else { - nextCluster &= 0x0FFF; - } - - if (nextCluster >= 0x0FF7) - { - nextCluster = CLUSTER_EOF; - } - - break; - - case FS_FAT16: - sector = partition->fat.fatStart + ((cluster << 1) / BYTES_PER_READ); - offset = (cluster % (BYTES_PER_READ >> 1)) << 1; - - _FAT_cache_readPartialSector (partition->cache, &nextCluster, sector, offset, sizeof(u16)); - - if (nextCluster >= 0xFFF7) - { - nextCluster = CLUSTER_EOF; - } - break; - - case FS_FAT32: - sector = partition->fat.fatStart + ((cluster << 2) / BYTES_PER_READ); - offset = (cluster % (BYTES_PER_READ >> 2)) << 2; - - _FAT_cache_readPartialSector (partition->cache, &nextCluster, sector, offset, sizeof(u32)); - - if (nextCluster >= 0x0FFFFFF7) - { - nextCluster = CLUSTER_EOF; - } - break; - - default: - nextCluster = CLUSTER_FREE; - break; - } - - return nextCluster; -} - -/* -writes value into the correct offset within a partition's FAT, based -on the cluster number. -*/ -static bool _FAT_fat_writeFatEntry (PARTITION* partition, u32 cluster, u32 value) { - u32 sector; - int offset; - u8 oldValue; - - if ((cluster < 0x0002) || (cluster > partition->fat.lastCluster)) - { - return false; - } - - switch (partition->filesysType) - { - case FS_UNKNOWN: - return false; - break; - - case FS_FAT12: - sector = partition->fat.fatStart + (((cluster * 3) / 2) / BYTES_PER_READ); - offset = ((cluster * 3) / 2) % BYTES_PER_READ; - - if (cluster & 0x01) { - - _FAT_cache_readPartialSector (partition->cache, &oldValue, sector, offset, sizeof(u8)); - - value = (value << 4) | (oldValue & 0x0F); - - _FAT_cache_writePartialSector (partition->cache, &value, sector, offset, sizeof(u8)); - - offset++; - if (offset >= BYTES_PER_READ) { - offset = 0; - sector++; - } - - _FAT_cache_writePartialSector (partition->cache, ((u8*)&value) + sizeof(u8), sector, offset, sizeof(u8)); - - } else { - - _FAT_cache_writePartialSector (partition->cache, &value, sector, offset, sizeof(u8)); - - offset++; - if (offset >= BYTES_PER_READ) { - offset = 0; - sector++; - } - - _FAT_cache_readPartialSector (partition->cache, &oldValue, sector, offset, sizeof(u8)); - - value = ((value >> 8) & 0x0F) | (oldValue & 0xF0); - - _FAT_cache_writePartialSector (partition->cache, &value, sector, offset, sizeof(u8)); - } - - break; - - case FS_FAT16: - sector = partition->fat.fatStart + ((cluster << 1) / BYTES_PER_READ); - offset = (cluster % (BYTES_PER_READ >> 1)) << 1; - - _FAT_cache_writePartialSector (partition->cache, &value, sector, offset, sizeof(u16)); - - break; - - case FS_FAT32: - sector = partition->fat.fatStart + ((cluster << 2) / BYTES_PER_READ); - offset = (cluster % (BYTES_PER_READ >> 2)) << 2; - - _FAT_cache_writePartialSector (partition->cache, &value, sector, offset, sizeof(u32)); - - break; - - default: - return false; - break; - } - - return true; -} - -/*----------------------------------------------------------------- -gets the first available free cluster, sets it -to end of file, links the input cluster to it then returns the -cluster number -If an error occurs, return CLUSTER_FREE ------------------------------------------------------------------*/ -u32 _FAT_fat_linkFreeCluster(PARTITION* partition, u32 cluster) { - u32 firstFree; - u32 curLink; - u32 lastCluster; - bool loopedAroundFAT = false; - - lastCluster = partition->fat.lastCluster; - - if (cluster > lastCluster) { - return CLUSTER_FREE; - } - - // Check if the cluster already has a link, and return it if so - curLink = _FAT_fat_nextCluster(partition, cluster); - if ((curLink >= CLUSTER_FIRST) && (curLink <= lastCluster)) { - return curLink; // Return the current link - don't allocate a new one - } - - // Get a free cluster - firstFree = partition->fat.firstFree; - // Start at first valid cluster - if (firstFree < CLUSTER_FIRST) { - firstFree = CLUSTER_FIRST; - } - - // Search until a free cluster is found - while (_FAT_fat_nextCluster(partition, firstFree) != CLUSTER_FREE) { - firstFree++; - if (firstFree > lastCluster) { - if (loopedAroundFAT) { - // If couldn't get a free cluster then return, saying this fact - partition->fat.firstFree = firstFree; - return CLUSTER_FREE; - } else { - // Try looping back to the beginning of the FAT - // This was suggested by loopy - firstFree = CLUSTER_FIRST; - loopedAroundFAT = true; - } - } - } - partition->fat.firstFree = firstFree; - - if ((cluster >= CLUSTER_FIRST) && (cluster < lastCluster)) - { - // Update the linked from FAT entry - _FAT_fat_writeFatEntry (partition, cluster, firstFree); - } - // Create the linked to FAT entry - _FAT_fat_writeFatEntry (partition, firstFree, CLUSTER_EOF); - - return firstFree; -} - -/*----------------------------------------------------------------- -gets the first available free cluster, sets it -to end of file, links the input cluster to it, clears the new -cluster to 0 valued bytes, then returns the cluster number -If an error occurs, return CLUSTER_FREE ------------------------------------------------------------------*/ -u32 _FAT_fat_linkFreeClusterCleared (PARTITION* partition, u32 cluster) { - u32 newCluster; - int i; - u8 emptySector[BYTES_PER_READ]; - - // Link the cluster - newCluster = _FAT_fat_linkFreeCluster(partition, cluster); - if (newCluster == CLUSTER_FREE) { - return CLUSTER_FREE; - } - - // Clear all the sectors within the cluster - memset (emptySector, 0, BYTES_PER_READ); - for (i = 0; i < partition->sectorsPerCluster; i++) { - _FAT_disc_writeSectors (partition->disc, - _FAT_fat_clusterToSector (partition, newCluster) + i, - 1, emptySector); - } - - return newCluster; -} - - -/*----------------------------------------------------------------- -_FAT_fat_clearLinks -frees any cluster used by a file ------------------------------------------------------------------*/ -bool _FAT_fat_clearLinks (PARTITION* partition, u32 cluster) { - u32 nextCluster; - - if ((cluster < 0x0002) || (cluster > partition->fat.lastCluster)) - return false; - - // If this clears up more space in the FAT before the current free pointer, move it backwards - if (cluster < partition->fat.firstFree) { - partition->fat.firstFree = cluster; - } - - while ((cluster != CLUSTER_EOF) && (cluster != CLUSTER_FREE)) { - // Store next cluster before erasing the link - nextCluster = _FAT_fat_nextCluster (partition, cluster); - - // Erase the link - _FAT_fat_writeFatEntry (partition, cluster, CLUSTER_FREE); - - // Move onto next cluster - cluster = nextCluster; - } - - return true; -} - -/*----------------------------------------------------------------- -_FAT_fat_lastCluster -Trace the cluster links until the last one is found ------------------------------------------------------------------*/ -u32 _FAT_fat_lastCluster (PARTITION* partition, u32 cluster) { - while ((_FAT_fat_nextCluster(partition, cluster) != CLUSTER_FREE) && (_FAT_fat_nextCluster(partition, cluster) != CLUSTER_EOF)) { - cluster = _FAT_fat_nextCluster(partition, cluster); - } - return cluster; -} diff --git a/sdk-modifications/libsrc/fs/file_allocation_table.h b/sdk-modifications/libsrc/fs/file_allocation_table.h deleted file mode 100755 index 4fb4149..0000000 --- a/sdk-modifications/libsrc/fs/file_allocation_table.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - file_allocation_table.h - Reading, writing and manipulation of the FAT structure on - a FAT partition - - Copyright (c) 2006 Michael "Chishm" Chisholm - - Redistribution and use in source and binary forms, with or without modification, - are permitted provided that the following conditions are met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - 2. Redistributions in binary form must reproduce the above copyright notice, - this list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. - 3. The name of the author may not be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED - WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY - AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - - 2006-07-11 - Chishm - * Original release - - 2006-10-01 - Chishm - * Added _FAT_fat_linkFreeClusterCleared to clear a cluster when it is allocated -*/ - -#ifndef _FAT_H -#define _FAT_H - -#include "fs_common.h" -#include "partition.h" - -#define CLUSTER_EOF_16 0xFFFF -#define CLUSTER_EOF 0x0FFFFFFF -#define CLUSTER_FREE 0x0000 -#define CLUSTER_FIRST 0x0002 - -#define CLUSTERS_PER_FAT12 4085 -#define CLUSTERS_PER_FAT16 65525 - - -u32 _FAT_fat_nextCluster(PARTITION* partition, u32 cluster); - -u32 _FAT_fat_linkFreeCluster(PARTITION* partition, u32 cluster); -u32 _FAT_fat_linkFreeClusterCleared (PARTITION* partition, u32 cluster); - -bool _FAT_fat_clearLinks (PARTITION* partition, u32 cluster); - -u32 _FAT_fat_lastCluster (PARTITION* partition, u32 cluster); - -static inline u32 _FAT_fat_clusterToSector (PARTITION* partition, u32 cluster) { - return (cluster >= 2) ? ((cluster - 2) * partition->sectorsPerCluster) + partition->dataStart : partition->rootDirStart; -} - -#endif // _FAT_H diff --git a/sdk-modifications/libsrc/fs/filetime.c b/sdk-modifications/libsrc/fs/filetime.c deleted file mode 100755 index f2de6ef..0000000 --- a/sdk-modifications/libsrc/fs/filetime.c +++ /dev/null @@ -1,146 +0,0 @@ -/* - filetime.c - Conversion of file time and date values to various other types - - Copyright (c) 2006 Michael "Chishm" Chisholm - - Redistribution and use in source and binary forms, with or without modification, - are permitted provided that the following conditions are met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - 2. Redistributions in binary form must reproduce the above copyright notice, - this list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. - 3. The name of the author may not be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED - WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY - AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - - 2006-07-11 - Chishm - * Original release - - 2006-09-30 - Chishm - * Validity checks performed on the time supplied by the IPC - * Cleaned up magic numbers - - 2006-10-01 - Chishm - * Fixed incorrect use of bitwise-or instead of logical-or -*/ - - -#include "filetime.h" - -#ifdef NDS -//#include <nds/ipc.h> -#include "ds2io.h" -#endif - -#define HOUR_PM_INDICATOR 40 - -#define MAX_HOUR 23 -#define MAX_MINUTE 59 -#define MAX_SECOND 59 - -#define MAX_YEAR 99 -#define MIN_YEAR 6 // The date is invalid if it's before this year -#define MAX_MONTH 12 -#define MIN_MONTH 1 -#define MAX_DAY 31 -#define MIN_DAY 1 - -// Second values are averages, so time value won't be 100% accurate, -// but should be within the correct month. -#define SECONDS_PER_MINUTE 60 -#define SECONDS_PER_HOUR 3600 -#define SECONDS_PER_DAY 86400 -#define SECONDS_PER_MONTH 2629743 -#define SECONDS_PER_YEAR 31556926 - -u16 _FAT_filetime_getTimeFromRTC (void) { -#ifdef NDS - int hour, minute, second; - struct rtc time; - - ds2_getTime(&time); - - hour = (time.hours >= HOUR_PM_INDICATOR ? time.hours - HOUR_PM_INDICATOR : time.hours); - minute = time.minutes; - second = time.seconds; - - // Check that the values are all in range. - // If they are not, return 0 (no timestamp) - if ((hour < 0) || (hour > MAX_HOUR)) return 0; - if ((minute < 0) || (minute > MAX_MINUTE)) return 0; - if ((second < 0) || (second > MAX_SECOND)) return 0; - - return ( - ((hour & 0x1F) << 11) | - ((minute & 0x3F) << 5) | - ((second >> 1) & 0x1F) - ); -#else - return 0; -#endif -} - - -u16 _FAT_filetime_getDateFromRTC (void) { -#ifdef NDS - int year, month, day; - struct rtc time; - - ds2_getTime(&time); - - year = time.year; - month = time.month; - day = time.day; - - if ((year < MIN_YEAR) || (year > MAX_YEAR)) return 0; - if ((month < MIN_MONTH) || (month > MAX_MONTH)) return 0; - if ((day < MIN_DAY) || (day > MAX_DAY)) return 0; - - return ( - (((year + 20) & 0x7F) <<9) | // Adjust for MS-FAT base year (1980 vs 2000 for DS clock) - ((month & 0xF) << 5) | - (day & 0x1F) - ); -#else - return 0; -#endif -} - -time_t _FAT_filetime_to_time_t (u16 time, u16 date) { - int hour, minute, second; - int day, month, year; - - time_t result; - - hour = time >> 11; - minute = (time >> 5) & 0x3F; - second = (time & 0x1F) << 1; - - day = date & 0x1F; - month = (date >> 5) & 0x0F; - year = date >> 9; - - // Second values are averages, so time value won't be 100% accurate, - // but should be within the correct month. - result = second - + minute * SECONDS_PER_MINUTE - + hour * SECONDS_PER_HOUR - + day * SECONDS_PER_DAY - + month * SECONDS_PER_MONTH - + year * SECONDS_PER_YEAR - ; - - return result; -} diff --git a/sdk-modifications/libsrc/fs/filetime.h b/sdk-modifications/libsrc/fs/filetime.h deleted file mode 100755 index fa651a7..0000000 --- a/sdk-modifications/libsrc/fs/filetime.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - filetime.h - Conversion of file time and date values to various other types - - Copyright (c) 2006 Michael "Chishm" Chisholm - - Redistribution and use in source and binary forms, with or without modification, - are permitted provided that the following conditions are met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - 2. Redistributions in binary form must reproduce the above copyright notice, - this list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. - 3. The name of the author may not be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED - WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY - AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - - 2006-07-11 - Chishm - * Original release -*/ - -#ifndef _FILETIME_H -#define _FILETIME_H - -#include "fs_common.h" -#include <sys/types.h> - -u16 _FAT_filetime_getTimeFromRTC (void); -u16 _FAT_filetime_getDateFromRTC (void); - -time_t _FAT_filetime_to_time_t (u16 time, u16 date); - - -#endif // _FILETIME_H diff --git a/sdk-modifications/libsrc/fs/fs.mk b/sdk-modifications/libsrc/fs/fs.mk deleted file mode 100644 index 3fee249..0000000 --- a/sdk-modifications/libsrc/fs/fs.mk +++ /dev/null @@ -1,24 +0,0 @@ -#fs.mk - -SRC += $(FS_DIR)/cache.c \ - $(FS_DIR)/directory.c \ - $(FS_DIR)/fatdir.c \ - $(FS_DIR)/fatfile.c \ - $(FS_DIR)/file_allocation_table.c \ - $(FS_DIR)/filetime.c \ - $(FS_DIR)/fs_api.c \ - $(FS_DIR)/fs_unicode.c \ - $(FS_DIR)/libfat.c \ - $(FS_DIR)/partition.c \ - $(FS_DIR)/fat_misc.c \ - $(FS_DIR)/disc_io/disc.c \ - $(FS_DIR)/disc_io/io_ds2_mmcf.c \ - $(FS_DIR)/ds2_fcntl.c \ - $(FS_DIR)/ds2_unistd.c - -SSRC += - -INC += -I$(FS_DIR) -I$(FS_DIR)/disc_io - -CFLAGS += -DNDS - diff --git a/sdk-modifications/libsrc/fs/fs_api.c b/sdk-modifications/libsrc/fs/fs_api.c deleted file mode 100755 index b23a450..0000000 --- a/sdk-modifications/libsrc/fs/fs_api.c +++ /dev/null @@ -1,452 +0,0 @@ -//fs_api.c
-
-#include <stdio.h>
-#include <fcntl.h>
-#include <errno.h>
-#include <stdarg.h>
-#include <string.h>
-#include <sys/stat.h>
-#include "fs_common.h"
-#include "fatfile.h"
-#include "fatdir.h"
-
-typedef unsigned int size_t;
-typedef unsigned int mode_t;
-
-typedef struct {
- const char* mode; /* mode string */
- unsigned int flag; /* mode flag */
-// unsigned char mode_r; /* READ */
-// unsigned char mode_w; /* WRITE */
-// unsigned char mode_a; /* APPEND */
-// unsigned char mode_c; /* CREATE */
-} _fat_mode_type;
-
-static const _fat_mode_type _fat_valid_mode[] = {
- { "r" , O_RDONLY },
- { "w" , O_WRONLY | O_TRUNC | O_CREAT },
- { "a" , O_WRONLY | O_APPEND | O_CREAT },
- { "rb" , O_RDONLY },
- { "wb" , O_WRONLY | O_TRUNC | O_CREAT },
- { "ab" , O_WRONLY | O_APPEND | O_CREAT },
- { "r+" , O_RDWR },
- { "w+" , O_RDWR | O_TRUNC | O_CREAT },
- { "a+" , O_RDWR | O_APPEND | O_CREAT },
- { "r+b" , O_RDWR },
- { "rb+" , O_RDWR },
- { "w+b" , O_RDWR | O_TRUNC | O_CREAT },
- { "wb+" , O_RDWR | O_TRUNC | O_CREAT },
- { "a+b" , O_RDWR | O_APPEND | O_CREAT },
- { "ab+" , O_RDWR | O_APPEND | O_CREAT }
-};
-
-#define MAX_OPEN_FILE 16
-#define MAX_OPEN_DIR 32
-#define MAX_PWD_LEN 512
-#define MAX_STDIO_BUF_SIZE 2048
-
-#define FAT_VALID_MODE_NUM (sizeof(_fat_valid_mode)/sizeof(_fat_mode_type))
-
-static FILE_STRUCT __FILEs[MAX_OPEN_FILE];
-struct _reent __REENT;
-static DIR_STATE_STRUCT __DIRs[MAX_OPEN_DIR];
-static char __PWD[MAX_PWD_LEN];
-
-int fat_init(void)
-{
- int i, flag;
-
- for(i= 0; i < MAX_OPEN_FILE; i++)
- __FILEs[i].inUse = false;
-
- for(i= 0; i < MAX_OPEN_DIR; i++)
- __DIRs[i].inUse = false;
-
- flag = -1;
- if(_FAT_Init() == true) //success
- flag = 0;
-
- return flag;
-}
-
-FILE_STRUCT* fat_fopen(const char *file, const char *mode)
-{
- int i, k;
- int fd;
- FILE_STRUCT* fp;
-
- for(i= 0; i < MAX_OPEN_FILE; i++)
- if(false == __FILEs[i].inUse) break;
-
- if(i >= MAX_OPEN_FILE)
- {
- __REENT._errno = EMFILE; /* Too many open files */
- return NULL;
- }
-
- for(k = 0; k < FAT_VALID_MODE_NUM; k++)
- if(!strcasecmp(_fat_valid_mode[k].mode, mode)) break;
-
- if(k >= FAT_VALID_MODE_NUM)
- {
- __REENT._errno = EINVAL;
- return NULL;
- }
-
- fd = _FAT_open_r(&__REENT, (void*)&__FILEs[i], file, _fat_valid_mode[k].flag);
- if(-1 == fd) return NULL;
-
- fp = &__FILEs[i];
- fp -> fd = fd;
-
- return fp;
-}
-
-size_t fat_fread(void *buf, size_t size, size_t count, FILE_STRUCT *fp)
-{
- if(0 == size || 0 == count)
- return 0;
-
- int len = _FAT_read_r(&__REENT, fp->fd, (char*)buf, size*count);
- len /= size;
- return len;
-}
-
-size_t fat_fwrite(const void *buf, size_t size, size_t count, FILE_STRUCT *fp)
-{
- if(0 == size || 0 == count)
- return 0;
-
- int len = _FAT_write_r(&__REENT, fp->fd, (const char*)buf, size*count);
- len /= size;
-
- return len;
-}
-
-int fat_fclose(FILE_STRUCT *fp)
-{
- return( _FAT_close_r(&__REENT, fp->fd) );
-}
-
-int fat_fseek(FILE_STRUCT *fp, long offset, int whence)
-{
- int flag;
-
- //When success, _FAT_seek_r return file position pointer
- flag = _FAT_seek_r (&__REENT, fp->fd, (int)offset, whence);
- if(flag > 0) flag = 0;
-
- return flag;
-}
-
-long fat_ftell(FILE_STRUCT *fp)
-{
- return( (long)fp->currentPosition );
-}
-
-int fat_feof(FILE_STRUCT *fp)
-{
- int result;
-
- result = 0;
- if((fp->currentPosition +1) >= (fp->filesize))
- result = -1;
-
- return result;
-}
-
-int fat_ferror(FILE_STRUCT *fp)
-{
- return( __REENT._errno );
-}
-
-void fat_clearerr(FILE_STRUCT *fp)
-{
- fp = fp;
-
- __REENT._errno = 0;
-}
-
-int fat_fflush(FILE_STRUCT *fp)
-{
- return(_FAT_cache_flush(fp->partition->cache));
-}
-
-int fat_fgetc(FILE_STRUCT *fp)
-{
- char ch;
- int result;
-
- result = _FAT_read_r(&__REENT, fp->fd, &ch, 1);
- if(0 == result)
- return EOF;
-
- return ( (int)ch );
-}
-
-char* fat_fgets(char* buf, int n, FILE_STRUCT* fp)
-{
- int m;
- char *s;
-
- buf[0] = '\0';
- if(n <= 1) return buf;
-
- n -= 1;
- m = _FAT_read_r(&__REENT, fp->fd, buf, n);
- if(0 == m) return NULL;
-
- buf[m] = '\0';
- s = strchr((const char*)buf, 0x0A);
-
- if(NULL != s)
- {
- *(++s)= '\0';
- m -= s - buf;
-
- //fix reading pointer
- _FAT_seek_r (&__REENT, fp->fd, -m, SEEK_CUR);
- }
- else if(m == n)
- {
- if(0x0D == buf[n-1]) //0x0D,0x0A
- {
- buf[n-1] = '\0';
- _FAT_seek_r (&__REENT, fp->fd, -1, SEEK_CUR);
- }
- }
-
- return buf;
-}
-
-int fat_fputc(int ch, FILE_STRUCT *fp)
-{
- return( _FAT_write_r(&__REENT, fp->fd, (const char*)&ch, 1) );
-}
-
-int fat_fputs(const char *s, FILE_STRUCT *fp)
-{
- unsigned int len;
-
- len = strlen(s);
- return( _FAT_write_r(&__REENT, fp->fd, s, len) );
-}
-
-int fat_remove(const char *filename)
-{
- return( _FAT_unlink_r (&__REENT, (const char*)filename) );
-}
-
-int fat_rename(const char *oldName, const char *newName)
-{
- return( _FAT_rename_r(&__REENT, oldName, newName) );
-}
-
-int fat_setHidden(const char *name, unsigned char hide){
- return(_FAT_hideAttrib_r (&__REENT, name, hide));
-}
-
-#define S_ISHID(st_mode) ((st_mode & S_IHIDDEN) != 0)
-int fat_isHidden(struct stat *st){
- return S_ISHID(st->st_mode);
-}
-
-int fat_getShortName(const char *fullName, char *outName){
- return(_FAT_getshortname_r (&__REENT, fullName, outName));
-}
-
-
-void fat_rewind(FILE_STRUCT *fp)
-{
- _FAT_seek_r (&__REENT, fp->fd, 0, SEEK_SET);
-}
-
-int fat_fstat(int fildes, struct stat *buf)
-{
- return( _FAT_fstat_r (&__REENT, fildes, buf) );
-}
-
-//int fat_fprintf(FILE_STRUCT *fp, const char *format, ...)
-int fat_fprintf(void* fp, const char *format, ...)
-{
- int ret;
- va_list ap;
- char buf[MAX_STDIO_BUF_SIZE];
-
- if(NULL == fp)
- {
- __REENT._errno = EINVAL;
- return -1;
- }
-
- //FIXME: stderr, stdout
- if((void*)stderr == fp) return 0;
- if((void*)stdout == fp) return 0;
-
- memset(buf, 0, MAX_STDIO_BUF_SIZE);
-
- va_start (ap, format);
- ret = vsnprintf (buf, MAX_STDIO_BUF_SIZE, format, ap);
- va_end (ap);
-
- //if output string too long, it will not put out to file
- if(ret >= MAX_STDIO_BUF_SIZE)
- return -1;
-
- return( _FAT_write_r(&__REENT, ((FILE_STRUCT*)fp)->fd, (const char*)buf, strlen(buf)) );
-}
-
-int fat_fscanf(FILE_STRUCT *fp, const char *format, ...)
-{
- int ret;
- va_list ap;
- char buf[MAX_STDIO_BUF_SIZE];
- char *pt;
-
- if(NULL == fp)
- {
- __REENT._errno = EINVAL;
- return -1;
- }
-
- pt = fat_fgets(buf, MAX_STDIO_BUF_SIZE, fp);
- if(NULL == pt)
- return -1;
-
- va_start (ap, format);
- ret = vsscanf (buf, format, ap);
-
- return ret;
-}
-
-DIR_STATE_STRUCT* fat_opendir(const char *name)
-{
- int i;
-
- for(i = 0; i < MAX_OPEN_DIR; i++)
- {
- if(false == __DIRs[i].inUse) break;
- }
-
- if(i>= MAX_OPEN_DIR)
- {
- __REENT._errno = EMFILE; /* Too many open files */
- return NULL;
- }
-
- return( _FAT_diropen_r(&__REENT, &__DIRs[i], name) );
-}
-
-DIR_ENTRY* fat_readdir(DIR_STATE_STRUCT *dirp)
-{
- int isValid;
-
- isValid = _FAT_dirnext_r (&__REENT, dirp, NULL);
- if(0 != isValid)
- return NULL;
-
- return( &(dirp->currentEntry) );
-}
-
-long int fat_telldir(DIR_STATE_STRUCT *dirp)
-{
- return( dirp->posEntry );
-}
-
-void fat_seekdir(DIR_STATE_STRUCT *dirp, long int loc)
-{
- if (!dirp->inUse) {
- __REENT._errno = EBADF;
- return;
- }
-
- if(0 == loc)
- {
- dirp->posEntry = 0;
- }
- else if(loc > 0)
- {
- while(dirp->posEntry < loc)
- {
- dirp->validEntry = _FAT_directory_getNextEntry (dirp->partition, &(dirp->currentEntry));
- dirp->posEntry += 1;
-
- if(!dirp->validEntry) break;
- }
- }
-
- return;
-}
-
-int fat_closedir(DIR_STATE_STRUCT *dirp)
-{
- return(_FAT_dirclose_r (&__REENT, dirp));
-}
-
-int fat_chdir(const char *path)
-{
- int ret;
- char *pt;
-
- ret = _FAT_chdir_r (&__REENT, path);
- if(0 != ret) return -1;
-
- pt = strchr(path, ':');
- if(pt == NULL)
- strcat(__PWD, path);
- else
- strcpy(__PWD, path);
-
- pt = strchr(__PWD, '\0');
- while(pt-- != __PWD)
- {
- if(pt[0] != DIR_SEPARATOR) break;
- }
-
- pt[1] = DIR_SEPARATOR;
- pt[2] = '\0';
-
- return 0;
-}
-
-char* fat_getcwd(char *buf, size_t size)
-{
- int len;
-
- len = strlen(__PWD);
- if(len >= size)
- {
- __REENT._errno = ERANGE;
- return NULL;
- }
-
- strcpy(buf, __PWD);
- return buf;
-}
-
-int fat_mkdir(const char *path, mode_t mode)
-{
- return( _FAT_mkdir_r(&__REENT, path, mode) );
-}
-
-int fat_rmdir(const char *path)
-{
- return( _FAT_unlink_r(&__REENT, path) );
-}
-
-int fat_lstat(const char *path, struct stat *buf)
-{
- return( _FAT_stat_r (&__REENT, path, buf) );
-}
-
-DIR_ENTRY* fat_readdir_ex(DIR_STATE_STRUCT *dirp, struct stat *statbuf)
-{
- int isValid;
-
- isValid = _FAT_dirnext_r (&__REENT, dirp, statbuf);
- if(0 != isValid)
- return NULL;
-
- return( &(dirp->currentEntry) );
-}
-
diff --git a/sdk-modifications/libsrc/fs/fs_api.h b/sdk-modifications/libsrc/fs/fs_api.h deleted file mode 100755 index fa4ae07..0000000 --- a/sdk-modifications/libsrc/fs/fs_api.h +++ /dev/null @@ -1,130 +0,0 @@ -#ifndef __FS_API_H__
-#define __FS_API_H__
-//v1.0
-
-#include "sys/stat.h"
-#include "fatfile.h"
-#include "fatdir.h"
-
-extern struct _reent __REENT;
-typedef unsigned int mode_t;
-
-extern int fat_init(void);
-
-extern FILE_STRUCT* fat_fopen(const char *file, const char *mode);
-
-extern size_t fat_fread(void *buf, size_t size, size_t count, FILE_STRUCT *fp);
-
-extern size_t fat_fwrite(const void *buf, size_t size, size_t count, FILE_STRUCT *fp);
-
-extern int fat_fclose(FILE_STRUCT *fp);
-
-extern int fat_fseek(FILE_STRUCT *fp, long offset, int whence);
-
-extern long fat_ftell(FILE_STRUCT *fp);
-
-extern int fat_feof(FILE_STRUCT *fp);
-
-extern int fat_ferror(FILE_STRUCT *fp);
-
-extern void fat_clearerr(FILE_STRUCT *fp);
-
-extern int fat_fflush(FILE_STRUCT *fp);
-
-extern int fat_fgetc(FILE_STRUCT *fp);
-
-extern char* fat_fgets(char *buf, int n, FILE_STRUCT *fp);
-
-extern int fat_fputc(int ch, FILE_STRUCT *fp);
-
-extern int fat_fputs(const char *s, FILE_STRUCT *fp);
-
-extern int fat_remove(const char *filename);
-
-extern int fat_rename(const char *oldName, const char *newName);
-
-extern int fat_setHidden(const char *name, unsigned char hide);
-
-extern int fat_isHidden(struct stat *st);
-
-extern int fat_getShortName(const char *fullName, char *outName);
-
-extern void fat_rewind(FILE_STRUCT *fp);
-
-extern int fat_fstat(int fildes, struct stat *buf);
-
-extern int fat_fprintf(void* fp, const char *format, ...);
-
-extern int fat_fscanf(FILE_STRUCT *fp, const char *format, ...);
-
-extern DIR_STATE_STRUCT* fat_opendir(const char *name);
-
-extern DIR_ENTRY* fat_readdir(DIR_STATE_STRUCT *dirp);
-
-extern long fat_telldir(DIR_STATE_STRUCT *dirp);
-
-extern void fat_seekdir(DIR_STATE_STRUCT *dirp, long int loc);
-
-extern int fat_closedir(DIR_STATE_STRUCT *dirp);
-
-extern int fat_chdir(const char *path);
-
-extern char* fat_getcwd(char *buf, size_t size);
-
-extern int fat_mkdir(const char *path, mode_t mode);
-
-extern int fat_rmdir(const char *path);
-
-extern int fat_lstat(const char *path, struct stat *buf);
-
-extern DIR_ENTRY* fat_readdir_ex(DIR_STATE_STRUCT *dirp, struct stat *statbuf);
-
-//#define S_ISDIR(st) (st.st_mode & S_IFDIR)
-
-#define FILE FILE_STRUCT
-#define fopen fat_fopen
-#define fread fat_fread
-#define fwrite fat_fwrite
-#define fclose fat_fclose
-#define fseek fat_fseek
-#define ftell fat_ftell
-#define feof fat_feof
-#define ferror fat_ferror
-#define fclearerr fat_clearerr
-#define fflush fat_fflush
-#define fgetc fat_fgetc
-#define fgets fat_fgets
-#define fputc fat_fputc
-#define fputs fat_fputs
-#define fprintf fat_fprintf
-#define fscanf fat_fscanf
-#define remove fat_remove
-#define fhidden fat_isHidden
-
-#define DIR DIR_STATE_STRUCT
-#define dirent DIR_ENTRY
-#define opendir fat_opendir
-#define readdir fat_readdir
-#define telldir fat_telldir
-#define seekdir fat_seekdir
-#define closedir fat_closedir
-#define chdir fat_chdir
-#define getcwd fat_getcwd
-#define mkdir fat_mkdir
-#define rmdir fat_rmdir
-
-#define lstat fat_lstat
-#define fstat fat_fstat
-
-#define S_ISHID(st_mode) ((st_mode & S_IHIDDEN) != 0)
-
-//the extended version of readdir_ex
-#define readdir_ex fat_readdir_ex
-
-#define MAX_PATH 512
-#define MAX_FILE 512
-
-//Misc function
-extern bool fat_getDiskSpaceInfo( char * diskName, unsigned int *total, unsigned int *used, unsigned int *freeSpace );
-
-#endif //__FS_API_H__
diff --git a/sdk-modifications/libsrc/fs/fs_cache.h b/sdk-modifications/libsrc/fs/fs_cache.h deleted file mode 100755 index 1abae66..0000000 --- a/sdk-modifications/libsrc/fs/fs_cache.h +++ /dev/null @@ -1,125 +0,0 @@ -/* - cache.h - The cache is not visible to the user. It should be flushed - when any file is closed or changes are made to the filesystem. - - This cache implements a least-used-page replacement policy. This will - distribute sectors evenly over the pages, so if less than the maximum - pages are used at once, they should all eventually remain in the cache. - This also has the benefit of throwing out old sectors, so as not to keep - too many stale pages around. - - Copyright (c) 2006 Michael "Chishm" Chisholm - - Redistribution and use in source and binary forms, with or without modification, - are permitted provided that the following conditions are met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - 2. Redistributions in binary form must reproduce the above copyright notice, - this list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. - 3. The name of the author may not be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED - WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY - AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - - 2006-07-11 - Chishm - * Original release -*/ - -#ifndef _CACHE_H -#define _CACHE_H - -#include "fs_common.h" -#include "disc_io/disc_io.h" - -#define CACHE_PAGE_SIZE BYTES_PER_READ - -typedef struct { - u32 sector; - u32 count; - bool dirty; -} CACHE_ENTRY; - -typedef struct { - const IO_INTERFACE* disc; - u32 numberOfPages; - CACHE_ENTRY* cacheEntries; - u8* pages; -} CACHE; - - -/* -Read data from a sector in the cache -If the sector is not in the cache, it will be swapped in -offset is the position to start reading from -size is the amount of data to read -Precondition: offset + size <= BYTES_PER_READ -*/ -bool _FAT_cache_readPartialSector (CACHE* cache, void* buffer, u32 sector, u32 offset, u32 size); - -/* -Write data to a sector in the cache -If the sector is not in the cache, it will be swapped in. -When the sector is swapped out, the data will be written to the disc -offset is the position to start reading from -size is the amount of data to read -Precondition: offset + size <= BYTES_PER_READ -*/ -bool _FAT_cache_writePartialSector (CACHE* cache, const void* buffer, u32 sector, u32 offset, u32 size); - -/* -some where call _FAT_cache_writePartialSector to cache sector m , but later, another -place(in fwrite function) directly write data to sector m, in this case, need to -cancel the dirty state of sector m -*/ -void _FAT_cache_writePartialSector_check (CACHE* cache, u32 sector, u32 num, const void* buffer); - -/* -Write data to a sector in the cache, zeroing the sector first -If the sector is not in the cache, it will be swapped in. -When the sector is swapped out, the data will be written to the disc -offset is the position to start reading from -size is the amount of data to read -Precondition: offset + size <= BYTES_PER_READ -*/ -bool _FAT_cache_eraseWritePartialSector (CACHE* cache, const void* buffer, u32 sector, u32 offset, u32 size); - -/* -Read a full sector from the cache -*/ -static inline bool _FAT_cache_readSector (CACHE* cache, void* buffer, u32 sector) { - return _FAT_cache_readPartialSector (cache, buffer, sector, 0, BYTES_PER_READ); -} - -/* -Write a full sector to the cache -*/ -static inline bool _FAT_cache_writeSector (CACHE* cache, const void* buffer, u32 sector) { - return _FAT_cache_writePartialSector (cache, buffer, sector, 0, BYTES_PER_READ); -} - -/* -Write any dirty sectors back to disc and clear out the contents of the cache -*/ -bool _FAT_cache_flush (CACHE* cache); - -/* -Clear out the contents of the cache without writing any dirty sectors first -*/ -void _FAT_cache_invalidate (CACHE* cache); - -CACHE* _FAT_cache_constructor (u32 numberOfPages, const IO_INTERFACE* discInterface); - -void _FAT_cache_destructor (CACHE* cache); - -#endif // _CACHE_H diff --git a/sdk-modifications/libsrc/fs/fs_common.h b/sdk-modifications/libsrc/fs/fs_common.h deleted file mode 100755 index db47d9a..0000000 --- a/sdk-modifications/libsrc/fs/fs_common.h +++ /dev/null @@ -1,116 +0,0 @@ -/* - common.h - Common definitions and included files for the FATlib - - Copyright (c) 2006 Michael "Chishm" Chisholm - - Redistribution and use in source and binary forms, with or without modification, - are permitted provided that the following conditions are met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - 2. Redistributions in binary form must reproduce the above copyright notice, - this list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. - 3. The name of the author may not be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED - WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY - AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - - 2006-07-11 - Chishm - * Original release -*/ - -#ifndef _COMMON_H -#define _COMMON_H - -// When compiling for NDS, make sure NDS is defined -#ifndef NDS - #if defined ARM9 || defined ARM7 - #define NDS - #endif -#endif - -#if 0 -#ifdef NDS - #include <nds/jtypes.h> -#else - #include "gba_types.h" -#endif -#endif - -#define BYTES_PER_READ 512 - -// MODIFICATION START [Neb] -// In libfat by Chishm, some types are #define'd here. In the DS2 SDK, -// these types are defined by another header. -#include "ds2_types.h" - -#ifndef bool -#define bool int -#endif - -#ifndef false -#define false 0 -#endif - -#ifndef true -#define true 1 -#endif - -// MODIFICATION END [Neb] - -struct _reent -{ - /* FILE is a big struct and may change over time. To try to achieve binary - compatibility with future versions, put stdin,stdout,stderr here. - These are pointers into member __sf defined below. */ -// __FILE *_stdin, *_stdout, *_stderr; /* XXX */ - - int _errno; /* local copy of errno */ - -// int _inc; /* used by tmpnam */ - -// char *_emergency; - -// int __sdidinit; /* 1 means stdio has been init'd */ - -// int _current_category; /* unused */ -// _CONST char *_current_locale; /* unused */ - -// struct _mprec *_mp; - -// void _EXFNPTR(__cleanup, (struct _reent *)); - -// int _gamma_signgam; - - /* used by some fp conversion routines */ -// int _cvtlen; /* should be size_t */ -// char *_cvtbuf; - -// struct _rand48 *_r48; -// struct __tm *_localtime_buf; -// char *_asctime_buf; - - /* signal info */ -// void (**(_sig_func))(int); - - /* atexit stuff */ -// struct _atexit *_atexit; -// struct _atexit _atexit0; - -// struct _glue __sglue; /* root of glue chain */ -// __FILE *__sf; /* file descriptors */ -// struct _misc_reent *_misc; /* strtok, multibyte states */ -// char *_signal_buf; /* strsignal */ -}; - -#endif // _COMMON_H diff --git a/sdk-modifications/libsrc/fs/fs_unicode.c b/sdk-modifications/libsrc/fs/fs_unicode.c deleted file mode 100755 index 2f1c1ed..0000000 --- a/sdk-modifications/libsrc/fs/fs_unicode.c +++ /dev/null @@ -1,173 +0,0 @@ -//fs_unicode.c - -#include <string.h>
-#include "fs_common.h"
-
-//void _FAT_unicode_init_default() // ANSI CODE PAGE
-//{
-// _L2UTable = NULL;
-// _U2LTable = NULL;
-// _ankTable = NULL;
-//}
-
-static inline const char* _FAT_utf8decode(const char* utf8, u16 *ucs)
-{
- unsigned char c = *utf8++;
- unsigned long code;
- int tail = 0;
-
- if ((c <= 0x7f) || (c >= 0xc2)) {
- /* Start of new character. */
- if (c < 0x80) { /* U-00000000 - U-0000007F, 1 byte */
- code = c;
- } else if (c < 0xe0) { /* U-00000080 - U-000007FF, 2 bytes */
- tail = 1;
- code = c & 0x1f;
- } else if (c < 0xf0) { /* U-00000800 - U-0000FFFF, 3 bytes */
- tail = 2;
- code = c & 0x0f;
- } else if (c < 0xf5) { /* U-00010000 - U-001FFFFF, 4 bytes */
- tail = 3;
- code = c & 0x07;
- } else {
- /* Invalid size. */
- code = 0;
- }
-
- while (tail-- && ((c = *utf8++) != 0)) {
- if ((c & 0xc0) == 0x80) {
- /* Valid continuation character. */
- code = (code << 6) | (c & 0x3f);
-
- } else {
- /* Invalid continuation char */
- code = 0xfffd;
- utf8--;
- break;
- }
- }
- } else {
- /* Invalid UTF-8 char */
- code = 0;
- }
- /* currently we don't support chars above U-FFFF */
- *ucs = (code < 0x10000) ? code : 0;
- return utf8;
-}
-
-void _FAT_utf8_to_unicode16( const char* src, unsigned short* dest )
-{
- while('\0' != *src)
- {
- src = _FAT_utf8decode(src, dest++); - } -
- *dest = '\0';
-}
-
-#if 0
-static inline int _FAT_utf8coding(const u16* ucs, char* dest)
-{
- int len= 0;
-
- if (*ucs < 0x80) //one byte
- {
- dest[len++] = *ucs;
- }
- else if (*ucs < 0x800) //two bytes
- {
- dest[len++] = 0xC0 | (*ucs >> 6 & 0x1F);
- dest[len++] = 0x80 | (*ucs & 0x3F);
- }
- else //if(*ucs < 0x10000) //three bytes
- {
- dest[len++] = 0xE0 | (*ucs >> 12);
- dest[len++] = 0x80 | (*ucs >>6 & 0x3F);
- dest[len++] = 0x80 | (*ucs &0x3F);
- }
-
- return len;
-}
-#endif
-
-void _FAT_unicode16_to_utf8( const u16* src, char* dest)
-{
- int len=0;
- while(*src)
- {
- if (*src < 0x80) //1 byte
- {
- dest[len++] = *src;
- }
- else if (*src < 0x800) //2 bytes
- {
- dest[len++] = 0xC0 | (*src >> 6 & 0x1F);
- dest[len++] = 0x80 | (*src & 0x3F);
- }
- else //if(*src < 0x10000) //3 bytes
- {
- dest[len++] = 0xE0 | (*src >> 12);
- dest[len++] = 0x80 | (*src >>6 & 0x3F);
- dest[len++] = 0x80 | (*src &0x3F);
- }
- src ++;
- }
- dest[len] = 0;
-}
-
-u32 _unistrnlen( const u16* unistr, u32 maxlen )
-{
- const u16 * pstr = NULL;
- u32 len = 0;
- if( NULL == unistr )
- return 0;
-
- if( 0 == maxlen )
- return 0;
-
- pstr = unistr;
-
- while( len < maxlen && *pstr != 0x0000 )
- {
- ++len;
- ++pstr;
- }
- return len;
-}
-
-int _unistrncmp( const u16* src, const u16* dest, u32 maxlen )
-{
- if( NULL == src || NULL == dest )
- {
- if( src == dest ) return 0;
- return (NULL == src ) ? -1 : 1;
- }
-
- while( *src == *dest && maxlen && *src != 0x0000 && *dest != 0x0000 )
- {
- ++src;
- ++dest;
- --maxlen;
- }
- if( 0 == maxlen ) return 0;
-
- return *src > *dest ? 1 : -1;
-}
-
-const u16 * _unistrchr( const u16 * str, u16 unichar )
-{
- if( NULL == str )
- return NULL;
-
- while( *str != unichar && *str != 0x0000 )
- {
- ++str;
- }
- return str;
-}
-
-int _uniisalnum( u8 ch )
-{
- return isalnum( ch );
-}
-
diff --git a/sdk-modifications/libsrc/fs/fs_unicode.h b/sdk-modifications/libsrc/fs/fs_unicode.h deleted file mode 100755 index 45e9d0a..0000000 --- a/sdk-modifications/libsrc/fs/fs_unicode.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef __FS_UNICODE_H__ -#define __FS_UNICODE_H__ - -extern void _FAT_utf8_to_unicode16( const char* src, u16* dest ); - -extern void _FAT_unicode16_to_utf8( const u16* src, char* dest); - -extern u32 _unistrnlen( const u16* unistr, u32 maxlen ); - -extern int _unistrncmp( const u16 * src, const u16 * dest, u32 maxlen ); - -extern const u16 * _unistrchr( const u16 * str, u16 unichar ); - -int _uniisalnum( u8 ch ); - -#endif //__FS_UNICODE_H__ diff --git a/sdk-modifications/libsrc/fs/libfat.c b/sdk-modifications/libsrc/fs/libfat.c deleted file mode 100755 index 1956d13..0000000 --- a/sdk-modifications/libsrc/fs/libfat.c +++ /dev/null @@ -1,174 +0,0 @@ -/* - libfat.c - Simple functionality for startup, mounting and unmounting of FAT-based devices. - - Copyright (c) 2006 Michael "Chishm" Chisholm - - Redistribution and use in source and binary forms, with or without modification, - are permitted provided that the following conditions are met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - 2. Redistributions in binary form must reproduce the above copyright notice, - this list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. - 3. The name of the author may not be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED - WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY - AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - - 2006-07-11 - Chishm - * Original release - - 2006-08-13 - Chishm - * Moved all externally visible directory related functions to fatdir - - 2006-08-14 - Chishm - * Added extended devoptab_t functions - - 2007-01-10 - Chishm - * fatInit now sets the correct path when setAsDefaultDevice - - 2007-01-11 - Chishm - * Added missing #include <unistd.h> -*/ - -/* - -*/ - -#include <unistd.h> - -#include "fs_common.h" -#include "partition.h" -#include "fatfile.h" -#include "fatdir.h" -#include "fs_unicode.h" -#include "io_ds2_mmcf.h" - -#define GBA_DEFAULT_CACHE_PAGES 2 -#define NDS_DEFAULT_CACHE_PAGES 8 - -#if 0 -const devoptab_t dotab_fat = { - "fat", - sizeof (FILE_STRUCT), - _FAT_open_r, - _FAT_close_r, - _FAT_write_r, - _FAT_read_r, - _FAT_seek_r, - _FAT_fstat_r, - _FAT_stat_r, - _FAT_link_r, - _FAT_unlink_r, - _FAT_chdir_r, - _FAT_rename_r, - _FAT_mkdir_r, - sizeof (DIR_STATE_STRUCT), - _FAT_diropen_r, - _FAT_dirreset_r, - _FAT_dirnext_r, - _FAT_dirclose_r -}; -#endif - -#if 0 -bool fatInit (u32 cacheSize, bool setAsDefaultDevice) -{ -#ifdef NDS - bool slot1Device, slot2Device; - - // add unicode suppport - //file name string coding are set to UTF8, other coding needed conveted to UTF8 by the caller - //_FAT_unicode_init_default(); - - // Try mounting both slots - slot1Device = _FAT_partition_mount (PI_SLOT_1, cacheSize); - slot2Device = _FAT_partition_mount (PI_SLOT_2, cacheSize); - - // Choose the default device - if (slot1Device) { - _FAT_partition_setDefaultInterface (PI_SLOT_1); - } else if (slot2Device) { - _FAT_partition_setDefaultInterface (PI_SLOT_2); - } else { - return false; - } - -#else // not defined NDS - bool cartSlotDevice; - - cartSlotDevice = _FAT_partition_mount (PI_CART_SLOT, cacheSize); - - if (cartSlotDevice) { - _FAT_partition_setDefaultInterface (PI_CART_SLOT); - } else { - return false; - } - -#endif // defined NDS - - AddDevice (&dotab_fat); - - if (setAsDefaultDevice) { - chdir ("fat:/"); - } - - return true; -} -#endif - -#if 0 -bool fatInitDefault (void) { -#ifdef NDS - return fatInit (NDS_DEFAULT_CACHE_PAGES, true); -#else - return fatInit (GBA_DEFAULT_CACHE_PAGES, true); -#endif -} -#endif - -bool _FAT_Init(void) -{ - // Try mounting sd/mmc - bool sdOK = false; - if( _io_ds2_mmcf.fn_startup() == 0) //NO ERROR - sdOK = _FAT_partition_freeMount( PI_DEFAULT, &_io_ds2_mmcf, 8); - else - return false; - - if(sdOK == true) - fat_chdir ("fat:/"); - - return sdOK; -} - -bool fatMountNormalInterface (PARTITION_INTERFACE partitionNumber, u32 cacheSize) { - return _FAT_partition_mount (partitionNumber, cacheSize); -} - -bool fatMountCustomInterface (const IO_INTERFACE* device, u32 cacheSize) { - return _FAT_partition_mountCustomInterface (device, cacheSize); -} - -bool fatUnmount (PARTITION_INTERFACE partitionNumber) { - return _FAT_partition_unmount (partitionNumber); -} - - -bool fatUnsafeUnmount (PARTITION_INTERFACE partitionNumber) { - return _FAT_partition_unsafeUnmount (partitionNumber); -} - -bool fatSetDefaultInterface (PARTITION_INTERFACE partitionNumber) { - return _FAT_partition_setDefaultInterface (partitionNumber); -} diff --git a/sdk-modifications/libsrc/fs/mem_allocate.h b/sdk-modifications/libsrc/fs/mem_allocate.h deleted file mode 100755 index 7bbe8de..0000000 --- a/sdk-modifications/libsrc/fs/mem_allocate.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - mem_allocate.h - Memory allocation and destruction calls - Replace these calls with custom allocators if - malloc is unavailable - - Copyright (c) 2006 Michael "Chishm" Chisholm - - Redistribution and use in source and binary forms, with or without modification, - are permitted provided that the following conditions are met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - 2. Redistributions in binary form must reproduce the above copyright notice, - this list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. - 3. The name of the author may not be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED - WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY - AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - - 2006-07-11 - Chishm - * Original release -*/ - -#ifndef _MEM_ALLOCATE_H -#define _MEM_ALLOCATE_H - -#include "ds2_malloc.h" - -static inline void* _FAT_mem_allocate (size_t size) { - return ((void*)malloc (size)); -} - -static inline void _FAT_mem_free (void* mem) { - return (free ((void*)mem)); -} - -#endif // _MEM_ALLOCATE_H diff --git a/sdk-modifications/libsrc/fs/partition.c b/sdk-modifications/libsrc/fs/partition.c deleted file mode 100755 index 1791b40..0000000 --- a/sdk-modifications/libsrc/fs/partition.c +++ /dev/null @@ -1,501 +0,0 @@ -/*
- partition.c
- Functions for mounting and dismounting partitions
- on various block devices.
-
- Copyright (c) 2006 Michael "Chishm" Chisholm
-
- Redistribution and use in source and binary forms, with or without modification,
- are permitted provided that the following conditions are met:
-
- 1. Redistributions of source code must retain the above copyright notice,
- this list of conditions and the following disclaimer.
- 2. Redistributions in binary form must reproduce the above copyright notice,
- this list of conditions and the following disclaimer in the documentation and/or
- other materials provided with the distribution.
- 3. The name of the author may not be used to endorse or promote products derived
- from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
- WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
- EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
- 2006-07-11 - Chishm
- * Original release
-
- 2006-08-10 - Chishm
- * Fixed problem when openning files starting with "fat"
-
- 2006-10-28 - Chishm
- * _partitions changed to _FAT_partitions to maintain the same style of naming as the functions
-*/
-//version 1.1
-//Note: fix bug in _FAT_partition_setDefaultPartition() function -
-#include "partition.h"
-#include "bit_ops.h"
-#include "file_allocation_table.h"
-#include "directory.h"
-
-#include <string.h>
-#include <ctype.h>
-
-#include "mem_allocate.h"
-
-/*
-This device name, as known by DevKitPro
-*/
-const char* DEVICE_NAME = "fat";
-
-/*
-Data offsets
-*/
-
-// BIOS Parameter Block offsets
-enum BPB {
- BPB_jmpBoot = 0x00,
- BPB_OEMName = 0x03,
- // BIOS Parameter Block
- BPB_bytesPerSector = 0x0B,
- BPB_sectorsPerCluster = 0x0D,
- BPB_reservedSectors = 0x0E,
- BPB_numFATs = 0x10,
- BPB_rootEntries = 0x11,
- BPB_numSectorsSmall = 0x13,
- BPB_mediaDesc = 0x15,
- BPB_sectorsPerFAT = 0x16,
- BPB_sectorsPerTrk = 0x18,
- BPB_numHeads = 0x1A,
- BPB_numHiddenSectors = 0x1C,
- BPB_numSectors = 0x20,
- // Ext BIOS Parameter Block for FAT16
- BPB_FAT16_driveNumber = 0x24,
- BPB_FAT16_reserved1 = 0x25,
- BPB_FAT16_extBootSig = 0x26,
- BPB_FAT16_volumeID = 0x27,
- BPB_FAT16_volumeLabel = 0x2B,
- BPB_FAT16_fileSysType = 0x36,
- // Bootcode
- BPB_FAT16_bootCode = 0x3E,
- // FAT32 extended block
- BPB_FAT32_sectorsPerFAT32 = 0x24,
- BPB_FAT32_extFlags = 0x28,
- BPB_FAT32_fsVer = 0x2A,
- BPB_FAT32_rootClus = 0x2C,
- BPB_FAT32_fsInfo = 0x30,
- BPB_FAT32_bkBootSec = 0x32,
- // Ext BIOS Parameter Block for FAT32
- BPB_FAT32_driveNumber = 0x40,
- BPB_FAT32_reserved1 = 0x41,
- BPB_FAT32_extBootSig = 0x42,
- BPB_FAT32_volumeID = 0x43,
- BPB_FAT32_volumeLabel = 0x47,
- BPB_FAT32_fileSysType = 0x52,
- // Bootcode
- BPB_FAT32_bootCode = 0x5A,
- BPB_bootSig_55 = 0x1FE,
- BPB_bootSig_AA = 0x1FF
-};
-
-
-#ifdef NDS
-#define MAXIMUM_PARTITIONS 4
-PARTITION* _FAT_partitions[MAXIMUM_PARTITIONS] = {NULL};
-#else // not defined NDS
-#define MAXIMUM_PARTITIONS 1
-PARTITION* _FAT_partitions[MAXIMUM_PARTITIONS] = {NULL};
-#endif // defined NDS
-
-// Use a single static buffer for the partitions
-
-
-static PARTITION* _FAT_partition_constructor ( const IO_INTERFACE* disc, u32 cacheSize) {
- PARTITION* partition;
- int i;
- u32 bootSector;
- u8 sectorBuffer[BYTES_PER_READ] = {0};
-
- // Read first sector of disc
- if ( !_FAT_disc_readSectors (disc, 0, 1, sectorBuffer)) {
- return NULL;
- }
-
- // Make sure it is a valid MBR or boot sector
- if ( (sectorBuffer[BPB_bootSig_55] != 0x55) || (sectorBuffer[BPB_bootSig_AA] != 0xAA)) {
- return NULL;
- }
-
- // Check if there is a FAT string, which indicates this is a boot sector
- if ((sectorBuffer[0x36] == 'F') && (sectorBuffer[0x37] == 'A') && (sectorBuffer[0x38] == 'T')) {
- bootSector = 0;
- } else if ((sectorBuffer[0x52] == 'F') && (sectorBuffer[0x53] == 'A') && (sectorBuffer[0x54] == 'T')) {
- // Check for FAT32
- bootSector = 0;
- } else {
- // This is an MBR
- // Find first valid partition from MBR
- // First check for an active partition
- for (i=0x1BE; (i < 0x1FE) && (sectorBuffer[i] != 0x80); i+= 0x10);
- // If it didn't find an active partition, search for any valid partition
- if (i == 0x1FE) {
- for (i=0x1BE; (i < 0x1FE) && (sectorBuffer[i+0x04] == 0x00); i+= 0x10);
- }
-
- // Go to first valid partition
- if ( i != 0x1FE) {
- // Make sure it found a partition
- bootSector = u8array_to_u32(sectorBuffer, 0x8 + i);
- } else {
- bootSector = 0; // No partition found, assume this is a MBR free disk
- }
- }
-
- // Read in boot sector
- if ( !_FAT_disc_readSectors (disc, bootSector, 1, sectorBuffer)) {
- return NULL;
- }
-
- partition = (PARTITION*) _FAT_mem_allocate (sizeof(PARTITION));
- if (partition == NULL) {
- return NULL;
- }
-
- // Set partition's disc interface
- partition->disc = disc;
-
- // Store required information about the file system
- partition->fat.sectorsPerFat = u8array_to_u16(sectorBuffer, BPB_sectorsPerFAT);
- if (partition->fat.sectorsPerFat == 0) {
- partition->fat.sectorsPerFat = u8array_to_u32( sectorBuffer, BPB_FAT32_sectorsPerFAT32);
- }
-
- partition->numberOfSectors = u8array_to_u16( sectorBuffer, BPB_numSectorsSmall);
- if (partition->numberOfSectors == 0) {
- partition->numberOfSectors = u8array_to_u32( sectorBuffer, BPB_numSectors);
- }
-
- partition->bytesPerSector = BYTES_PER_READ; // Sector size is redefined to be 512 bytes
- partition->sectorsPerCluster = sectorBuffer[BPB_sectorsPerCluster] * u8array_to_u16(sectorBuffer, BPB_bytesPerSector) / BYTES_PER_READ;
- partition->bytesPerCluster = partition->bytesPerSector * partition->sectorsPerCluster;
- partition->fat.fatStart = bootSector + u8array_to_u16(sectorBuffer, BPB_reservedSectors);
-
- partition->rootDirStart = partition->fat.fatStart + (sectorBuffer[BPB_numFATs] * partition->fat.sectorsPerFat);
- partition->dataStart = partition->rootDirStart + (( u8array_to_u16(sectorBuffer, BPB_rootEntries) * DIR_ENTRY_DATA_SIZE) / partition->bytesPerSector);
-
- partition->totalSize = (partition->numberOfSectors - partition->dataStart) * partition->bytesPerSector;
-
- // Store info about FAT
- partition->fat.lastCluster = (partition->numberOfSectors - partition->dataStart) / partition->sectorsPerCluster;
- partition->fat.firstFree = CLUSTER_FIRST;
-
- if (partition->fat.lastCluster < CLUSTERS_PER_FAT12) {
- partition->filesysType = FS_FAT12; // FAT12 volume
- } else if (partition->fat.lastCluster < CLUSTERS_PER_FAT16) {
- partition->filesysType = FS_FAT16; // FAT16 volume
- } else {
- partition->filesysType = FS_FAT32; // FAT32 volume
- }
-
- if (partition->filesysType != FS_FAT32) {
- partition->rootDirCluster = FAT16_ROOT_DIR_CLUSTER;
- } else {
- // Set up for the FAT32 way
- partition->rootDirCluster = u8array_to_u32(sectorBuffer, BPB_FAT32_rootClus);
- // Check if FAT mirroring is enabled
- if (!(sectorBuffer[BPB_FAT32_extFlags] & 0x80)) {
- // Use the active FAT
- partition->fat.fatStart = partition->fat.fatStart + ( partition->fat.sectorsPerFat * (sectorBuffer[BPB_FAT32_extFlags] & 0x0F));
- }
- }
-
- // Create a cache to use
- partition->cache = _FAT_cache_constructor (cacheSize, partition->disc);
-
- // Set current directory to the root
- partition->cwdCluster = partition->rootDirCluster;
-
- // Check if this disc is writable, and set the readOnly property appropriately
- partition->readOnly = !(_FAT_disc_features(disc) & FEATURE_MEDIUM_CANWRITE);
-
- // There are currently no open files on this partition
- partition->openFileCount = 0;
-
- return partition;
-}
-
-static void _FAT_partition_destructor (PARTITION* partition) {
- _FAT_cache_destructor (partition->cache);
- _FAT_disc_shutdown (partition->disc);
- _FAT_mem_free (partition);
-}
-
-bool _FAT_partition_mount (PARTITION_INTERFACE partitionNumber, u32 cacheSize)
-{
-#ifdef NDS
- int i;
- const IO_INTERFACE* disc = NULL;
-
- if (_FAT_partitions[partitionNumber] != NULL) {
- return false;
- }
-
- switch (partitionNumber) {
- case PI_SLOT_1:
- // Mount the disc in slot 1
- disc = _FAT_disc_dsSlotFindInterface ();
- break;
- case PI_SLOT_2:
- // Mount the disc in slot 2
- disc = _FAT_disc_gbaSlotFindInterface ();
- break;
- case PI_DEFAULT:
- case PI_CUSTOM:
- default:
- // Anything else has to be handled specially
- return false;
- break;
- }
-
- if (disc == NULL) {
- return false;
- }
-
- // See if that disc is already in use, if so, then just copy the partition pointer
- for (i = 0; i < MAXIMUM_PARTITIONS; i++) {
- if ((_FAT_partitions[i] != NULL) && (_FAT_partitions[i]->disc == disc)) {
- _FAT_partitions[partitionNumber] = _FAT_partitions[i];
- return true;
- }
- }
-
- _FAT_partitions[partitionNumber] = _FAT_partition_constructor (disc, cacheSize);
-
- if (_FAT_partitions[partitionNumber] == NULL) {
- return false;
- }
-
-#else // not defined NDS
- const IO_INTERFACE* disc = NULL;
-
- if (_FAT_partitions[partitionNumber] != NULL) {
- return false;
- }
-
- // Only ever one partition on GBA
- disc = _FAT_disc_gbaSlotFindInterface ();
- _FAT_partitions[partitionNumber] = _FAT_partition_constructor (disc, cacheSize);
-
-#endif // defined NDS
-
- return true;
-}
-
-bool _FAT_partition_mountCustomInterface (const IO_INTERFACE* device, u32 cacheSize) {
-#ifdef NDS
- int i;
-
- if (_FAT_partitions[PI_CUSTOM] != NULL) {
- return false;
- }
-
- if (device == NULL) {
- return false;
- }
-
- // See if that disc is already in use, if so, then just copy the partition pointer
- for (i = 0; i < MAXIMUM_PARTITIONS; i++) {
- if ((_FAT_partitions[i] != NULL) && (_FAT_partitions[i]->disc == device)) {
- _FAT_partitions[PI_CUSTOM] = _FAT_partitions[i];
- return true;
- }
- }
-
- _FAT_partitions[PI_CUSTOM] = _FAT_partition_constructor (device, cacheSize);
-
- if (_FAT_partitions[PI_CUSTOM] == NULL) {
- return false;
- }
-
-#else // not defined NDS
- if (_FAT_partitions[PI_CART_SLOT] != NULL) {
- return false;
- }
-
- if (device == NULL) {
- return false;
- }
-
- // Only ever one partition on GBA
- _FAT_partitions[PI_CART_SLOT] = _FAT_partition_constructor (device, cacheSize);
-
-#endif // defined NDS
-
- return true;
-}
-
-bool _FAT_partition_setDefaultInterface (PARTITION_INTERFACE partitionNumber)
-{
-#ifdef NDS // Can only set the default partition when there is more than 1, so doesn't apply to GBA
- if ((partitionNumber < 1) || (partitionNumber >= MAXIMUM_PARTITIONS)) {
- return false;
- }
-
- if (_FAT_partitions[partitionNumber] == NULL) {
- return false;
- }
-
- _FAT_partitions[PI_DEFAULT] = _FAT_partitions[partitionNumber];
-#endif
- return true;
-}
-
-bool _FAT_partition_setDefaultPartition (PARTITION* partition) {
-#ifdef NDS // Can only set the default partition when there is more than 1, so doesn't apply to GBA
- int i;
-
- if (partition == NULL) {
- return false;
- }
- - if(_FAT_partitions[PI_DEFAULT] == partition) //Already is the default partition
- return true; -
- // Ensure that this device is already in the list
- for (i = 1; i < MAXIMUM_PARTITIONS; i++) {
- if (_FAT_partitions[i] == partition) {
- break;
- } - }
-
- // It wasn't in the list, so fail
- if (i == MAXIMUM_PARTITIONS) {
- return false;
- } -
- // Change the default partition / device to this one
- _FAT_partitions[PI_DEFAULT] = partition;
-
-#endif
- return true;
-}
-
-bool _FAT_partition_unmount (PARTITION_INTERFACE partitionNumber) {
- int i;
- PARTITION* partition = _FAT_partitions[partitionNumber];
-
- if (partition == NULL) {
- return false;
- }
-
- if (partition->openFileCount > 0) {
- // There are still open files that need closing
- return false;
- }
-
- // Remove all references to this partition
- for (i = 0; i < MAXIMUM_PARTITIONS; i++) {
- if (_FAT_partitions[i] == partition) {
- _FAT_partitions[i] = NULL;
- }
- }
-
- _FAT_partition_destructor (partition);
- return true;
-}
-
-bool _FAT_partition_unsafeUnmount (PARTITION_INTERFACE partitionNumber) {
- int i;
- PARTITION* partition = _FAT_partitions[partitionNumber];
-
- if (partition == NULL) {
- return false;
- }
-
- // Remove all references to this partition
- for (i = 0; i < MAXIMUM_PARTITIONS; i++) {
- if (_FAT_partitions[i] == partition) {
- _FAT_partitions[i] = NULL;
- }
- }
-
- _FAT_cache_invalidate (partition->cache);
- _FAT_partition_destructor (partition);
- return true;
-}
-
-PARTITION* _FAT_partition_getPartitionFromPath (const char* path) {
-#ifdef NDS
- int namelen;
- int partitionNumber;
-
- // Device name extraction code taken from DevKitPro
- namelen = strlen(DEVICE_NAME);
- if (strchr (path, ':') == NULL) {
- // No device specified
- partitionNumber = PI_DEFAULT;
- } else if( strncmp(DEVICE_NAME, path, namelen) == 0 ) {
- if ( path[namelen] == ':' ) {
- // Only the device name is specified
- partitionNumber = PI_DEFAULT;
- } else if (isdigit(path[namelen]) && path[namelen+1] ==':' ) {
- // Device name and number specified
- partitionNumber = path[namelen] - '0';
- } else {
- // Incorrect device name
- return NULL;
- } - } else {
- // Incorrect device name
- return NULL;
- }
- - if ((partitionNumber < 0) || (partitionNumber >= MAXIMUM_PARTITIONS)) {
- return NULL;
- }
-
- return _FAT_partitions[partitionNumber];
-#else // not defined NDS
- // Only one possible partition on GBA
- return _FAT_partitions[PI_CART_SLOT];
-#endif // defined NDS
-}
-
-bool _FAT_partition_freeMount( int partitionNumber, const IO_INTERFACE* device, u32 cacheSize) {
-
- if( partitionNumber < 0 || partitionNumber > 3 )
- return false;
- int i;
-
- if (device == NULL) {
- return false;
- }
-
- if (_FAT_partitions[partitionNumber] != NULL) {
- if(_FAT_partitions[partitionNumber] -> disc == device)
- return true;
-
- return false;
- }
-
- // See if that disc is already in use, if so, then just copy the partition pointer
- for (i = 0; i < MAXIMUM_PARTITIONS; i++) {
- if ((_FAT_partitions[i] != NULL) && (_FAT_partitions[i]->disc == device)) {
- _FAT_partitions[partitionNumber] = _FAT_partitions[i];
- return true;
- }
- }
-
- _FAT_partitions[partitionNumber] = _FAT_partition_constructor (device, cacheSize);
-
- if (_FAT_partitions[partitionNumber] == NULL) {
- return false;
- } -
- return true;
-}
diff --git a/sdk-modifications/libsrc/fs/partition.h b/sdk-modifications/libsrc/fs/partition.h deleted file mode 100755 index 0777b54..0000000 --- a/sdk-modifications/libsrc/fs/partition.h +++ /dev/null @@ -1,131 +0,0 @@ -/* - partition.h - Functions for mounting and dismounting partitions - on various block devices. - - Copyright (c) 2006 Michael "Chishm" Chisholm - - Redistribution and use in source and binary forms, with or without modification, - are permitted provided that the following conditions are met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - 2. Redistributions in binary form must reproduce the above copyright notice, - this list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. - 3. The name of the author may not be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED - WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY - AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - - 2006-07-11 - Chishm - * Original release -*/ - -#ifndef _PARTITION_H -#define _PARTITION_H - -#include "fs_common.h" - -#include "disc_io/disc.h" -#include "fs_cache.h" - -// Device name -extern const char* DEVICE_NAME; - -// Filesystem type -typedef enum {FS_UNKNOWN, FS_FAT12, FS_FAT16, FS_FAT32} FS_TYPE; - -#ifdef NDS -typedef enum {PI_DEFAULT, PI_SLOT_1, PI_SLOT_2, PI_CUSTOM} PARTITION_INTERFACE; -#else -typedef enum {PI_CART_SLOT} PARTITION_INTERFACE; -#endif - -typedef struct { - u32 fatStart; - u32 sectorsPerFat; - u32 lastCluster; - u32 firstFree; -} FAT; - -typedef struct { - const IO_INTERFACE* disc; - CACHE* cache; - // Info about the partition - bool readOnly; // If this is set, then do not try writing to the disc - FS_TYPE filesysType; - u32 totalSize; - u32 rootDirStart; - u32 rootDirCluster; - u32 numberOfSectors; - u32 dataStart; - u32 bytesPerSector; - u32 sectorsPerCluster; - u32 bytesPerCluster; - FAT fat; - // Values that may change after construction - u32 cwdCluster; // Current working directory cluser - u32 openFileCount; -} PARTITION; - -/* -Mount the device specified by partitionDevice -PD_DEFAULT is not allowed, use _FAT_partition_setDefaultDevice -PD_CUSTOM is not allowed, use _FAT_partition_mountCustomDevice -*/ -bool _FAT_partition_mount (PARTITION_INTERFACE partitionNumber, u32 cacheSize); - -/* -Mount a partition on a custom device -*/ -bool _FAT_partition_mountCustomInterface (const IO_INTERFACE* device, u32 cacheSize); - - -/* -Free Mount a partition on a custom device -*/ -bool _FAT_partition_freeMount( int partitionNumber, const IO_INTERFACE* device, u32 cacheSize);
- - -/* -Unmount the partition specified by partitionNumber -If there are open files, it will fail -*/ -bool _FAT_partition_unmount (PARTITION_INTERFACE partitionNumber); - -/* -Forcibly unmount the partition specified by partitionNumber -Any open files on the partition will become invalid -The cache will be invalidated, and any unflushed writes will be lost -*/ -bool _FAT_partition_unsafeUnmount (PARTITION_INTERFACE partitionNumber); - -/* -Set the default device for access by fat: and fat0:, -based on the device number -*/ -bool _FAT_partition_setDefaultInterface (PARTITION_INTERFACE partitionNumber); - -/* -Set the default device for access by fat: and fat0:, -based on the partition pointer -*/ -bool _FAT_partition_setDefaultPartition (PARTITION* partition); - -/* -Return the partition specified in a path -For instance, "fat0:", "fat:", "/" and "fat:/" will all -return the default partition -*/ -PARTITION* _FAT_partition_getPartitionFromPath (const char* path); - -#endif // _PARTITION_H diff --git a/sdk-modifications/libsrc/key/key.c b/sdk-modifications/libsrc/key/key.c deleted file mode 100755 index 8a6ad5f..0000000 --- a/sdk-modifications/libsrc/key/key.c +++ /dev/null @@ -1,145 +0,0 @@ -#include "ds2_timer.h" -#include "ds2io.h" - -#define KEY_REPEAT_TIME 200 //5 times/second -#define KEY_REPEAT_TIME_N (KEY_REPEAT_TIME*1000000/SYSTIME_UNIT) - -#define INPUT_REPEAT_TIME 100 -#define INPUT_REPEAT_TIME_N (INPUT_REPEAT_TIME*1000000/SYSTIME_UNIT) - -static unsigned int _last_key = 0; -static unsigned int _last_key_timestamp = 0; - -/* -* Function: only detect the key pressed or not -*/ -unsigned int getKey(void) -{ - struct key_buf input; - unsigned int new_key, hold_key, ret_key, timestamp; - int flag; - - ds2_getrawInput(&input); - timestamp = getSysTime(); - flag = ((timestamp - _last_key_timestamp) >= KEY_REPEAT_TIME_N) ? 1 : 0; - - input.key &= 0x3FFF; - new_key = (_last_key ^ input.key) & input.key; - hold_key = _last_key & input.key; - - ret_key = 0; - if(hold_key) { - if(flag) - { - ret_key = hold_key; - _last_key_timestamp = timestamp; - } - } - - if(new_key) - { - ret_key |= new_key; - _last_key_timestamp = timestamp; - - _last_key = input.key; - } - - return ret_key; -} - -/* -* Function: can get the detail information about key pressed, hold, or release -*/ -unsigned int getKey1(void) -{ - struct key_buf input; - unsigned int new_key, hold_key, ret_key, timestamp; - int flag; - - ds2_getrawInput(&input); - timestamp = getSysTime(); - flag = ((timestamp - _last_key_timestamp) >= KEY_REPEAT_TIME_N) ? 1 : 0; - - input.key &= 0x3FFF; - new_key = _last_key ^ input.key; - hold_key = _last_key & input.key; - //ret_key[31:16] = last key; - //ret_key[15:0] = new key; - - ret_key = 0; - if(hold_key) { - if(flag) - { - ret_key = (hold_key << 16) | hold_key; - _last_key_timestamp = timestamp; - } - } - - if(new_key) - { - unsigned int tmp_key; - - //have new key pressed - if(new_key & input.key) - { - ret_key |= new_key & input.key; - _last_key_timestamp = timestamp; - } - else - { - ret_key |= (new_key & ~input.key) << 16; - } - - _last_key = input.key; - } - - return ret_key; -} - -static unsigned int _last_input = 0; -static unsigned int _last_input_timestamp = 0; - -/* -* Function: only detect the key pressed or not and touch position -*/ -unsigned int getInput(struct key_buf *input) { - struct key_buf rawin; - unsigned int timestamp, new, hold; - int flag, ret; - - ds2_getrawInput(&rawin); - timestamp = getSysTime(); - flag = ((timestamp - _last_input_timestamp) >= INPUT_REPEAT_TIME_N) ? 1 : 0; - - rawin.key &= 0x3FFF; - new = (rawin.key ^ _last_input) & rawin.key; - hold = rawin.key & _last_input; - - ret = 0; - if(hold && flag) - { - ret = hold; - input->x = rawin.x; - input->y = rawin.y; - - _last_input_timestamp = timestamp; - } - - if(new) - { - ret |= new; - input->x = rawin.x; - input->y = rawin.y; - - _last_input_timestamp = timestamp; - _last_input = rawin.key; - } - - input->key = ret; - return ret > 0; -} - - - - - diff --git a/sdk-modifications/libsrc/key/key.h b/sdk-modifications/libsrc/key/key.h deleted file mode 100755 index 21674ec..0000000 --- a/sdk-modifications/libsrc/key/key.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef __KEY_H__ -#define __KEY_H__ - -#ifdef __cplusplus -extern "C" { -#endif - -#define KEY_PRESS(key, key_id) (!(key & (key_id<<16)) && (key & key_id)) -#define KEY_HOLD(key, key_id) ((key & (key_id<<16)) && (key & key_id)) -#define KEY_RELEASE(key, key_id) ((key & (key_id<<16)) && !(key & key_id)) - -/* -* Function: only detect the key pressed or not -*/ -unsigned int getKey(void); - -/* -* Function: can get the detail information about key pressed, hold, or release -*/ -unsigned int getKey1(void); - -/* -* Function: detect the key pressed or not and touched position -*/ -extern unsigned int getInput(struct key_buf *input); - -#ifdef __cplusplus -} -#endif - -#endif //__KEY_H__ diff --git a/sdk-modifications/libsrc/key/key.mk b/sdk-modifications/libsrc/key/key.mk deleted file mode 100755 index fa08d7c..0000000 --- a/sdk-modifications/libsrc/key/key.mk +++ /dev/null @@ -1,10 +0,0 @@ -#key.mk - -SRC += $(KEY_DIR)/key.c - -SSRC += - -INC += -I$(KEY_DIR) - -CFLAGS += - diff --git a/sdk-modifications/libsrc/zlib/README b/sdk-modifications/libsrc/zlib/README deleted file mode 100644 index 90f3327..0000000 --- a/sdk-modifications/libsrc/zlib/README +++ /dev/null @@ -1,8 +0,0 @@ -This is a modified source release of zlib.
-
-Changes:
- zconf.h removes a reference to sys/types.h, which creates type conflicts on the DS2 SDK.
- gzguts.h removes standard c library includes for DS2 SDK equivalents
-
-
-For a pristine source release of zlib, please visit <http://zlib.net>.
\ No newline at end of file diff --git a/sdk-modifications/libsrc/zlib/adler32.c b/sdk-modifications/libsrc/zlib/adler32.c deleted file mode 100755 index a868f07..0000000 --- a/sdk-modifications/libsrc/zlib/adler32.c +++ /dev/null @@ -1,179 +0,0 @@ -/* adler32.c -- compute the Adler-32 checksum of a data stream - * Copyright (C) 1995-2011 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* @(#) $Id$ */ - -#include "zutil.h" - -#define local static - -local uLong adler32_combine_ OF((uLong adler1, uLong adler2, z_off64_t len2)); - -#define BASE 65521 /* largest prime smaller than 65536 */ -#define NMAX 5552 -/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */ - -#define DO1(buf,i) {adler += (buf)[i]; sum2 += adler;} -#define DO2(buf,i) DO1(buf,i); DO1(buf,i+1); -#define DO4(buf,i) DO2(buf,i); DO2(buf,i+2); -#define DO8(buf,i) DO4(buf,i); DO4(buf,i+4); -#define DO16(buf) DO8(buf,0); DO8(buf,8); - -/* use NO_DIVIDE if your processor does not do division in hardware -- - try it both ways to see which is faster */ -#ifdef NO_DIVIDE -/* note that this assumes BASE is 65521, where 65536 % 65521 == 15 - (thank you to John Reiser for pointing this out) */ -# define CHOP(a) \ - do { \ - unsigned long tmp = a >> 16; \ - a &= 0xffffUL; \ - a += (tmp << 4) - tmp; \ - } while (0) -# define MOD28(a) \ - do { \ - CHOP(a); \ - if (a >= BASE) a -= BASE; \ - } while (0) -# define MOD(a) \ - do { \ - CHOP(a); \ - MOD28(a); \ - } while (0) -# define MOD63(a) \ - do { /* this assumes a is not negative */ \ - z_off64_t tmp = a >> 32; \ - a &= 0xffffffffL; \ - a += (tmp << 8) - (tmp << 5) + tmp; \ - tmp = a >> 16; \ - a &= 0xffffL; \ - a += (tmp << 4) - tmp; \ - tmp = a >> 16; \ - a &= 0xffffL; \ - a += (tmp << 4) - tmp; \ - if (a >= BASE) a -= BASE; \ - } while (0) -#else -# define MOD(a) a %= BASE -# define MOD28(a) a %= BASE -# define MOD63(a) a %= BASE -#endif - -/* ========================================================================= */ -uLong ZEXPORT adler32(adler, buf, len) - uLong adler; - const Bytef *buf; - uInt len; -{ - unsigned long sum2; - unsigned n; - - /* split Adler-32 into component sums */ - sum2 = (adler >> 16) & 0xffff; - adler &= 0xffff; - - /* in case user likes doing a byte at a time, keep it fast */ - if (len == 1) { - adler += buf[0]; - if (adler >= BASE) - adler -= BASE; - sum2 += adler; - if (sum2 >= BASE) - sum2 -= BASE; - return adler | (sum2 << 16); - } - - /* initial Adler-32 value (deferred check for len == 1 speed) */ - if (buf == Z_NULL) - return 1L; - - /* in case short lengths are provided, keep it somewhat fast */ - if (len < 16) { - while (len--) { - adler += *buf++; - sum2 += adler; - } - if (adler >= BASE) - adler -= BASE; - MOD28(sum2); /* only added so many BASE's */ - return adler | (sum2 << 16); - } - - /* do length NMAX blocks -- requires just one modulo operation */ - while (len >= NMAX) { - len -= NMAX; - n = NMAX / 16; /* NMAX is divisible by 16 */ - do { - DO16(buf); /* 16 sums unrolled */ - buf += 16; - } while (--n); - MOD(adler); - MOD(sum2); - } - - /* do remaining bytes (less than NMAX, still just one modulo) */ - if (len) { /* avoid modulos if none remaining */ - while (len >= 16) { - len -= 16; - DO16(buf); - buf += 16; - } - while (len--) { - adler += *buf++; - sum2 += adler; - } - MOD(adler); - MOD(sum2); - } - - /* return recombined sums */ - return adler | (sum2 << 16); -} - -/* ========================================================================= */ -local uLong adler32_combine_(adler1, adler2, len2) - uLong adler1; - uLong adler2; - z_off64_t len2; -{ - unsigned long sum1; - unsigned long sum2; - unsigned rem; - - /* for negative len, return invalid adler32 as a clue for debugging */ - if (len2 < 0) - return 0xffffffffUL; - - /* the derivation of this formula is left as an exercise for the reader */ - MOD63(len2); /* assumes len2 >= 0 */ - rem = (unsigned)len2; - sum1 = adler1 & 0xffff; - sum2 = rem * sum1; - MOD(sum2); - sum1 += (adler2 & 0xffff) + BASE - 1; - sum2 += ((adler1 >> 16) & 0xffff) + ((adler2 >> 16) & 0xffff) + BASE - rem; - if (sum1 >= BASE) sum1 -= BASE; - if (sum1 >= BASE) sum1 -= BASE; - if (sum2 >= (BASE << 1)) sum2 -= (BASE << 1); - if (sum2 >= BASE) sum2 -= BASE; - return sum1 | (sum2 << 16); -} - -/* ========================================================================= */ -uLong ZEXPORT adler32_combine(adler1, adler2, len2) - uLong adler1; - uLong adler2; - z_off_t len2; -{ - return adler32_combine_(adler1, adler2, len2); -} - -uLong ZEXPORT adler32_combine64(adler1, adler2, len2) - uLong adler1; - uLong adler2; - z_off64_t len2; -{ - return adler32_combine_(adler1, adler2, len2); -} diff --git a/sdk-modifications/libsrc/zlib/compress.c b/sdk-modifications/libsrc/zlib/compress.c deleted file mode 100755 index ea4dfbe..0000000 --- a/sdk-modifications/libsrc/zlib/compress.c +++ /dev/null @@ -1,80 +0,0 @@ -/* compress.c -- compress a memory buffer - * Copyright (C) 1995-2005 Jean-loup Gailly. - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* @(#) $Id$ */ - -#define ZLIB_INTERNAL -#include "zlib.h" - -/* =========================================================================== - Compresses the source buffer into the destination buffer. The level - parameter has the same meaning as in deflateInit. sourceLen is the byte - length of the source buffer. Upon entry, destLen is the total size of the - destination buffer, which must be at least 0.1% larger than sourceLen plus - 12 bytes. Upon exit, destLen is the actual size of the compressed buffer. - - compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_BUF_ERROR if there was not enough room in the output buffer, - Z_STREAM_ERROR if the level parameter is invalid. -*/ -int ZEXPORT compress2 (dest, destLen, source, sourceLen, level) - Bytef *dest; - uLongf *destLen; - const Bytef *source; - uLong sourceLen; - int level; -{ - z_stream stream; - int err; - - stream.next_in = (Bytef*)source; - stream.avail_in = (uInt)sourceLen; -#ifdef MAXSEG_64K - /* Check for source > 64K on 16-bit machine: */ - if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR; -#endif - stream.next_out = dest; - stream.avail_out = (uInt)*destLen; - if ((uLong)stream.avail_out != *destLen) return Z_BUF_ERROR; - - stream.zalloc = (alloc_func)0; - stream.zfree = (free_func)0; - stream.opaque = (voidpf)0; - - err = deflateInit(&stream, level); - if (err != Z_OK) return err; - - err = deflate(&stream, Z_FINISH); - if (err != Z_STREAM_END) { - deflateEnd(&stream); - return err == Z_OK ? Z_BUF_ERROR : err; - } - *destLen = stream.total_out; - - err = deflateEnd(&stream); - return err; -} - -/* =========================================================================== - */ -int ZEXPORT compress (dest, destLen, source, sourceLen) - Bytef *dest; - uLongf *destLen; - const Bytef *source; - uLong sourceLen; -{ - return compress2(dest, destLen, source, sourceLen, Z_DEFAULT_COMPRESSION); -} - -/* =========================================================================== - If the default memLevel or windowBits for deflateInit() is changed, then - this function needs to be updated. - */ -uLong ZEXPORT compressBound (sourceLen) - uLong sourceLen; -{ - return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) + - (sourceLen >> 25) + 13; -} diff --git a/sdk-modifications/libsrc/zlib/crc32.c b/sdk-modifications/libsrc/zlib/crc32.c deleted file mode 100755 index c12471e..0000000 --- a/sdk-modifications/libsrc/zlib/crc32.c +++ /dev/null @@ -1,447 +0,0 @@ -/* crc32.c -- compute the CRC-32 of a data stream - * Copyright (C) 1995-2006, 2010, 2011 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - * - * Thanks to Rodney Brown <rbrown64@csc.com.au> for his contribution of faster - * CRC methods: exclusive-oring 32 bits of data at a time, and pre-computing - * tables for updating the shift register in one step with three exclusive-ors - * instead of four steps with four exclusive-ors. This results in about a - * factor of two increase in speed on a Power PC G4 (PPC7455) using gcc -O3. - */ - -/* @(#) $Id$ */ - -/* - Note on the use of DYNAMIC_CRC_TABLE: there is no mutex or semaphore - protection on the static variables used to control the first-use generation - of the crc tables. Therefore, if you #define DYNAMIC_CRC_TABLE, you should - first call get_crc_table() to initialize the tables before allowing more than - one thread to use crc32(). - - DYNAMIC_CRC_TABLE and MAKECRCH can be #defined to write out crc32.h. - */ - -#ifdef MAKECRCH -# include <stdio.h> -# ifndef DYNAMIC_CRC_TABLE -# define DYNAMIC_CRC_TABLE -# endif /* !DYNAMIC_CRC_TABLE */ -#endif /* MAKECRCH */ - -#include "zutil.h" /* for STDC and FAR definitions */ - -#define local static - -/* Find a four-byte integer type for crc32_little() and crc32_big(). */ -#ifndef NOBYFOUR -# ifdef STDC /* need ANSI C limits.h to determine sizes */ -# include <limits.h> -# define BYFOUR -# if (UINT_MAX == 0xffffffffUL) - typedef unsigned int u4; -# else -# if (ULONG_MAX == 0xffffffffUL) - typedef unsigned long u4; -# else -# if (USHRT_MAX == 0xffffffffUL) - typedef unsigned short u4; -# else -# undef BYFOUR /* can't find a four-byte integer type! */ -# endif -# endif -# endif -# endif /* STDC */ -#endif /* !NOBYFOUR */ - -/* Definitions for doing the crc four data bytes at a time. */ -#ifdef BYFOUR - typedef u4 crc_table_t; -# define REV(w) ((((w)>>24)&0xff)+(((w)>>8)&0xff00)+ \ - (((w)&0xff00)<<8)+(((w)&0xff)<<24)) - local unsigned long crc32_little OF((unsigned long, - const unsigned char FAR *, unsigned)); - local unsigned long crc32_big OF((unsigned long, - const unsigned char FAR *, unsigned)); -# define TBLS 8 -#else - typedef unsigned long crc_table_t; -# define TBLS 1 -#endif /* BYFOUR */ - -/* Local functions for crc concatenation */ -local unsigned long gf2_matrix_times OF((unsigned long *mat, - unsigned long vec)); -local void gf2_matrix_square OF((unsigned long *square, unsigned long *mat)); -local uLong crc32_combine_ OF((uLong crc1, uLong crc2, z_off64_t len2)); - - -#ifdef DYNAMIC_CRC_TABLE - -local volatile int crc_table_empty = 1; -local crc_table_t FAR crc_table[TBLS][256]; -local void make_crc_table OF((void)); -#ifdef MAKECRCH - local void write_table OF((FILE *, const crc_table_t FAR *)); -#endif /* MAKECRCH */ -/* - Generate tables for a byte-wise 32-bit CRC calculation on the polynomial: - x^32+x^26+x^23+x^22+x^16+x^12+x^11+x^10+x^8+x^7+x^5+x^4+x^2+x+1. - - Polynomials over GF(2) are represented in binary, one bit per coefficient, - with the lowest powers in the most significant bit. Then adding polynomials - is just exclusive-or, and multiplying a polynomial by x is a right shift by - one. If we call the above polynomial p, and represent a byte as the - polynomial q, also with the lowest power in the most significant bit (so the - byte 0xb1 is the polynomial x^7+x^3+x+1), then the CRC is (q*x^32) mod p, - where a mod b means the remainder after dividing a by b. - - This calculation is done using the shift-register method of multiplying and - taking the remainder. The register is initialized to zero, and for each - incoming bit, x^32 is added mod p to the register if the bit is a one (where - x^32 mod p is p+x^32 = x^26+...+1), and the register is multiplied mod p by - x (which is shifting right by one and adding x^32 mod p if the bit shifted - out is a one). We start with the highest power (least significant bit) of - q and repeat for all eight bits of q. - - The first table is simply the CRC of all possible eight bit values. This is - all the information needed to generate CRCs on data a byte at a time for all - combinations of CRC register values and incoming bytes. The remaining tables - allow for word-at-a-time CRC calculation for both big-endian and little- - endian machines, where a word is four bytes. -*/ -local void make_crc_table() -{ - crc_table_t c; - int n, k; - crc_table_t poly; /* polynomial exclusive-or pattern */ - /* terms of polynomial defining this crc (except x^32): */ - static volatile int first = 1; /* flag to limit concurrent making */ - static const unsigned char p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26}; - - /* See if another task is already doing this (not thread-safe, but better - than nothing -- significantly reduces duration of vulnerability in - case the advice about DYNAMIC_CRC_TABLE is ignored) */ - if (first) { - first = 0; - - /* make exclusive-or pattern from polynomial (0xedb88320UL) */ - poly = 0; - for (n = 0; n < (int)(sizeof(p)/sizeof(unsigned char)); n++) - poly |= (crc_table_t)1 << (31 - p[n]); - - /* generate a crc for every 8-bit value */ - for (n = 0; n < 256; n++) { - c = (crc_table_t)n; - for (k = 0; k < 8; k++) - c = c & 1 ? poly ^ (c >> 1) : c >> 1; - crc_table[0][n] = c; - } - -#ifdef BYFOUR - /* generate crc for each value followed by one, two, and three zeros, - and then the byte reversal of those as well as the first table */ - for (n = 0; n < 256; n++) { - c = crc_table[0][n]; - crc_table[4][n] = REV(c); - for (k = 1; k < 4; k++) { - c = crc_table[0][c & 0xff] ^ (c >> 8); - crc_table[k][n] = c; - crc_table[k + 4][n] = REV(c); - } - } -#endif /* BYFOUR */ - - crc_table_empty = 0; - } - else { /* not first */ - /* wait for the other guy to finish (not efficient, but rare) */ - while (crc_table_empty) - ; - } - -#ifdef MAKECRCH - /* write out CRC tables to crc32.h */ - { - FILE *out; - - out = fopen("crc32.h", "w"); - if (out == NULL) return; - fprintf(out, "/* crc32.h -- tables for rapid CRC calculation\n"); - fprintf(out, " * Generated automatically by crc32.c\n */\n\n"); - fprintf(out, "local const crc_table_t FAR "); - fprintf(out, "crc_table[TBLS][256] =\n{\n {\n"); - write_table(out, crc_table[0]); -# ifdef BYFOUR - fprintf(out, "#ifdef BYFOUR\n"); - for (k = 1; k < 8; k++) { - fprintf(out, " },\n {\n"); - write_table(out, crc_table[k]); - } - fprintf(out, "#endif\n"); -# endif /* BYFOUR */ - fprintf(out, " }\n};\n"); - fclose(out); - } -#endif /* MAKECRCH */ -} - -#ifdef MAKECRCH -local void write_table(out, table) - FILE *out; - const crc_table_t FAR *table; -{ - int n; - - for (n = 0; n < 256; n++) - fprintf(out, "%s0x%08lxUL%s", n % 5 ? "" : " ", - (unsigned long)(table[n]), - n == 255 ? "\n" : (n % 5 == 4 ? ",\n" : ", ")); -} -#endif /* MAKECRCH */ - -#else /* !DYNAMIC_CRC_TABLE */ -/* ======================================================================== - * Tables of CRC-32s of all single-byte values, made by make_crc_table(). - */ -#include "crc32.h" -#endif /* DYNAMIC_CRC_TABLE */ - -/* ========================================================================= - * This function can be used by asm versions of crc32() - */ -const unsigned long FAR * ZEXPORT get_crc_table() -{ -#ifdef DYNAMIC_CRC_TABLE - if (crc_table_empty) - make_crc_table(); -#endif /* DYNAMIC_CRC_TABLE */ - return (const unsigned long FAR *)crc_table; -} - -/* ========================================================================= */ -#define DO1 crc = crc_table[0][((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8) -#define DO8 DO1; DO1; DO1; DO1; DO1; DO1; DO1; DO1 - -/* ========================================================================= */ -unsigned long ZEXPORT crc32(crc, buf, len) - unsigned long crc; - const unsigned char FAR *buf; - uInt len; -{ - if (buf == Z_NULL) return 0UL; - -#ifdef DYNAMIC_CRC_TABLE - if (crc_table_empty) - make_crc_table(); -#endif /* DYNAMIC_CRC_TABLE */ - -#ifdef BYFOUR - if (sizeof(void *) == sizeof(ptrdiff_t)) { - u4 endian; - - endian = 1; - if (*((unsigned char *)(&endian))) - return crc32_little(crc, buf, len); - else - return crc32_big(crc, buf, len); - } -#endif /* BYFOUR */ - crc = crc ^ 0xffffffffUL; - while (len >= 8) { - DO8; - len -= 8; - } - if (len) do { - DO1; - } while (--len); - return crc ^ 0xffffffffUL; -} - -#ifdef BYFOUR - -/* ========================================================================= */ -#define DOLIT4 c ^= *buf4++; \ - c = crc_table[3][c & 0xff] ^ crc_table[2][(c >> 8) & 0xff] ^ \ - crc_table[1][(c >> 16) & 0xff] ^ crc_table[0][c >> 24] -#define DOLIT32 DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4 - -/* ========================================================================= */ -local unsigned long crc32_little(crc, buf, len) - unsigned long crc; - const unsigned char FAR *buf; - unsigned len; -{ - register u4 c; - register const u4 FAR *buf4; - - c = (u4)crc; - c = ~c; - while (len && ((ptrdiff_t)buf & 3)) { - c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8); - len--; - } - - buf4 = (const u4 FAR *)(const void FAR *)buf; - while (len >= 32) { - DOLIT32; - len -= 32; - } - while (len >= 4) { - DOLIT4; - len -= 4; - } - buf = (const unsigned char FAR *)buf4; - - if (len) do { - c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8); - } while (--len); - c = ~c; - return (unsigned long)c; -} - -/* ========================================================================= */ -#define DOBIG4 c ^= *++buf4; \ - c = crc_table[4][c & 0xff] ^ crc_table[5][(c >> 8) & 0xff] ^ \ - crc_table[6][(c >> 16) & 0xff] ^ crc_table[7][c >> 24] -#define DOBIG32 DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4 - -/* ========================================================================= */ -local unsigned long crc32_big(crc, buf, len) - unsigned long crc; - const unsigned char FAR *buf; - unsigned len; -{ - register u4 c; - register const u4 FAR *buf4; - - c = REV((u4)crc); - c = ~c; - while (len && ((ptrdiff_t)buf & 3)) { - c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8); - len--; - } - - buf4 = (const u4 FAR *)(const void FAR *)buf; - buf4--; - while (len >= 32) { - DOBIG32; - len -= 32; - } - while (len >= 4) { - DOBIG4; - len -= 4; - } - buf4++; - buf = (const unsigned char FAR *)buf4; - - if (len) do { - c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8); - } while (--len); - c = ~c; - return (unsigned long)(REV(c)); -} - -#endif /* BYFOUR */ - -#define GF2_DIM 32 /* dimension of GF(2) vectors (length of CRC) */ - -/* ========================================================================= */ -local unsigned long gf2_matrix_times(mat, vec) - unsigned long *mat; - unsigned long vec; -{ - unsigned long sum; - - sum = 0; - while (vec) { - if (vec & 1) - sum ^= *mat; - vec >>= 1; - mat++; - } - return sum; -} - -/* ========================================================================= */ -local void gf2_matrix_square(square, mat) - unsigned long *square; - unsigned long *mat; -{ - int n; - - for (n = 0; n < GF2_DIM; n++) - square[n] = gf2_matrix_times(mat, mat[n]); -} - -/* ========================================================================= */ -local uLong crc32_combine_(crc1, crc2, len2) - uLong crc1; - uLong crc2; - z_off64_t len2; -{ - int n; - unsigned long row; - unsigned long even[GF2_DIM]; /* even-power-of-two zeros operator */ - unsigned long odd[GF2_DIM]; /* odd-power-of-two zeros operator */ - - /* degenerate case (also disallow negative lengths) */ - if (len2 <= 0) - return crc1; - - /* put operator for one zero bit in odd */ - odd[0] = 0xedb88320UL; /* CRC-32 polynomial */ - row = 1; - for (n = 1; n < GF2_DIM; n++) { - odd[n] = row; - row <<= 1; - } - - /* put operator for two zero bits in even */ - gf2_matrix_square(even, odd); - - /* put operator for four zero bits in odd */ - gf2_matrix_square(odd, even); - - /* apply len2 zeros to crc1 (first square will put the operator for one - zero byte, eight zero bits, in even) */ - do { - /* apply zeros operator for this bit of len2 */ - gf2_matrix_square(even, odd); - if (len2 & 1) - crc1 = gf2_matrix_times(even, crc1); - len2 >>= 1; - - /* if no more bits set, then done */ - if (len2 == 0) - break; - - /* another iteration of the loop with odd and even swapped */ - gf2_matrix_square(odd, even); - if (len2 & 1) - crc1 = gf2_matrix_times(odd, crc1); - len2 >>= 1; - - /* if no more bits set, then done */ - } while (len2 != 0); - - /* return combined crc */ - crc1 ^= crc2; - return crc1; -} - -/* ========================================================================= */ -uLong ZEXPORT crc32_combine(crc1, crc2, len2) - uLong crc1; - uLong crc2; - z_off_t len2; -{ - return crc32_combine_(crc1, crc2, len2); -} - -uLong ZEXPORT crc32_combine64(crc1, crc2, len2) - uLong crc1; - uLong crc2; - z_off64_t len2; -{ - return crc32_combine_(crc1, crc2, len2); -} diff --git a/sdk-modifications/libsrc/zlib/crc32.h b/sdk-modifications/libsrc/zlib/crc32.h deleted file mode 100755 index c3e7171..0000000 --- a/sdk-modifications/libsrc/zlib/crc32.h +++ /dev/null @@ -1,441 +0,0 @@ -/* crc32.h -- tables for rapid CRC calculation - * Generated automatically by crc32.c - */ - -local const crc_table_t FAR crc_table[TBLS][256] = -{ - { - 0x00000000UL, 0x77073096UL, 0xee0e612cUL, 0x990951baUL, 0x076dc419UL, - 0x706af48fUL, 0xe963a535UL, 0x9e6495a3UL, 0x0edb8832UL, 0x79dcb8a4UL, - 0xe0d5e91eUL, 0x97d2d988UL, 0x09b64c2bUL, 0x7eb17cbdUL, 0xe7b82d07UL, - 0x90bf1d91UL, 0x1db71064UL, 0x6ab020f2UL, 0xf3b97148UL, 0x84be41deUL, - 0x1adad47dUL, 0x6ddde4ebUL, 0xf4d4b551UL, 0x83d385c7UL, 0x136c9856UL, - 0x646ba8c0UL, 0xfd62f97aUL, 0x8a65c9ecUL, 0x14015c4fUL, 0x63066cd9UL, - 0xfa0f3d63UL, 0x8d080df5UL, 0x3b6e20c8UL, 0x4c69105eUL, 0xd56041e4UL, - 0xa2677172UL, 0x3c03e4d1UL, 0x4b04d447UL, 0xd20d85fdUL, 0xa50ab56bUL, - 0x35b5a8faUL, 0x42b2986cUL, 0xdbbbc9d6UL, 0xacbcf940UL, 0x32d86ce3UL, - 0x45df5c75UL, 0xdcd60dcfUL, 0xabd13d59UL, 0x26d930acUL, 0x51de003aUL, - 0xc8d75180UL, 0xbfd06116UL, 0x21b4f4b5UL, 0x56b3c423UL, 0xcfba9599UL, - 0xb8bda50fUL, 0x2802b89eUL, 0x5f058808UL, 0xc60cd9b2UL, 0xb10be924UL, - 0x2f6f7c87UL, 0x58684c11UL, 0xc1611dabUL, 0xb6662d3dUL, 0x76dc4190UL, - 0x01db7106UL, 0x98d220bcUL, 0xefd5102aUL, 0x71b18589UL, 0x06b6b51fUL, - 0x9fbfe4a5UL, 0xe8b8d433UL, 0x7807c9a2UL, 0x0f00f934UL, 0x9609a88eUL, - 0xe10e9818UL, 0x7f6a0dbbUL, 0x086d3d2dUL, 0x91646c97UL, 0xe6635c01UL, - 0x6b6b51f4UL, 0x1c6c6162UL, 0x856530d8UL, 0xf262004eUL, 0x6c0695edUL, - 0x1b01a57bUL, 0x8208f4c1UL, 0xf50fc457UL, 0x65b0d9c6UL, 0x12b7e950UL, - 0x8bbeb8eaUL, 0xfcb9887cUL, 0x62dd1ddfUL, 0x15da2d49UL, 0x8cd37cf3UL, - 0xfbd44c65UL, 0x4db26158UL, 0x3ab551ceUL, 0xa3bc0074UL, 0xd4bb30e2UL, - 0x4adfa541UL, 0x3dd895d7UL, 0xa4d1c46dUL, 0xd3d6f4fbUL, 0x4369e96aUL, - 0x346ed9fcUL, 0xad678846UL, 0xda60b8d0UL, 0x44042d73UL, 0x33031de5UL, - 0xaa0a4c5fUL, 0xdd0d7cc9UL, 0x5005713cUL, 0x270241aaUL, 0xbe0b1010UL, - 0xc90c2086UL, 0x5768b525UL, 0x206f85b3UL, 0xb966d409UL, 0xce61e49fUL, - 0x5edef90eUL, 0x29d9c998UL, 0xb0d09822UL, 0xc7d7a8b4UL, 0x59b33d17UL, - 0x2eb40d81UL, 0xb7bd5c3bUL, 0xc0ba6cadUL, 0xedb88320UL, 0x9abfb3b6UL, - 0x03b6e20cUL, 0x74b1d29aUL, 0xead54739UL, 0x9dd277afUL, 0x04db2615UL, - 0x73dc1683UL, 0xe3630b12UL, 0x94643b84UL, 0x0d6d6a3eUL, 0x7a6a5aa8UL, - 0xe40ecf0bUL, 0x9309ff9dUL, 0x0a00ae27UL, 0x7d079eb1UL, 0xf00f9344UL, - 0x8708a3d2UL, 0x1e01f268UL, 0x6906c2feUL, 0xf762575dUL, 0x806567cbUL, - 0x196c3671UL, 0x6e6b06e7UL, 0xfed41b76UL, 0x89d32be0UL, 0x10da7a5aUL, - 0x67dd4accUL, 0xf9b9df6fUL, 0x8ebeeff9UL, 0x17b7be43UL, 0x60b08ed5UL, - 0xd6d6a3e8UL, 0xa1d1937eUL, 0x38d8c2c4UL, 0x4fdff252UL, 0xd1bb67f1UL, - 0xa6bc5767UL, 0x3fb506ddUL, 0x48b2364bUL, 0xd80d2bdaUL, 0xaf0a1b4cUL, - 0x36034af6UL, 0x41047a60UL, 0xdf60efc3UL, 0xa867df55UL, 0x316e8eefUL, - 0x4669be79UL, 0xcb61b38cUL, 0xbc66831aUL, 0x256fd2a0UL, 0x5268e236UL, - 0xcc0c7795UL, 0xbb0b4703UL, 0x220216b9UL, 0x5505262fUL, 0xc5ba3bbeUL, - 0xb2bd0b28UL, 0x2bb45a92UL, 0x5cb36a04UL, 0xc2d7ffa7UL, 0xb5d0cf31UL, - 0x2cd99e8bUL, 0x5bdeae1dUL, 0x9b64c2b0UL, 0xec63f226UL, 0x756aa39cUL, - 0x026d930aUL, 0x9c0906a9UL, 0xeb0e363fUL, 0x72076785UL, 0x05005713UL, - 0x95bf4a82UL, 0xe2b87a14UL, 0x7bb12baeUL, 0x0cb61b38UL, 0x92d28e9bUL, - 0xe5d5be0dUL, 0x7cdcefb7UL, 0x0bdbdf21UL, 0x86d3d2d4UL, 0xf1d4e242UL, - 0x68ddb3f8UL, 0x1fda836eUL, 0x81be16cdUL, 0xf6b9265bUL, 0x6fb077e1UL, - 0x18b74777UL, 0x88085ae6UL, 0xff0f6a70UL, 0x66063bcaUL, 0x11010b5cUL, - 0x8f659effUL, 0xf862ae69UL, 0x616bffd3UL, 0x166ccf45UL, 0xa00ae278UL, - 0xd70dd2eeUL, 0x4e048354UL, 0x3903b3c2UL, 0xa7672661UL, 0xd06016f7UL, - 0x4969474dUL, 0x3e6e77dbUL, 0xaed16a4aUL, 0xd9d65adcUL, 0x40df0b66UL, - 0x37d83bf0UL, 0xa9bcae53UL, 0xdebb9ec5UL, 0x47b2cf7fUL, 0x30b5ffe9UL, - 0xbdbdf21cUL, 0xcabac28aUL, 0x53b39330UL, 0x24b4a3a6UL, 0xbad03605UL, - 0xcdd70693UL, 0x54de5729UL, 0x23d967bfUL, 0xb3667a2eUL, 0xc4614ab8UL, - 0x5d681b02UL, 0x2a6f2b94UL, 0xb40bbe37UL, 0xc30c8ea1UL, 0x5a05df1bUL, - 0x2d02ef8dUL -#ifdef BYFOUR - }, - { - 0x00000000UL, 0x191b3141UL, 0x32366282UL, 0x2b2d53c3UL, 0x646cc504UL, - 0x7d77f445UL, 0x565aa786UL, 0x4f4196c7UL, 0xc8d98a08UL, 0xd1c2bb49UL, - 0xfaefe88aUL, 0xe3f4d9cbUL, 0xacb54f0cUL, 0xb5ae7e4dUL, 0x9e832d8eUL, - 0x87981ccfUL, 0x4ac21251UL, 0x53d92310UL, 0x78f470d3UL, 0x61ef4192UL, - 0x2eaed755UL, 0x37b5e614UL, 0x1c98b5d7UL, 0x05838496UL, 0x821b9859UL, - 0x9b00a918UL, 0xb02dfadbUL, 0xa936cb9aUL, 0xe6775d5dUL, 0xff6c6c1cUL, - 0xd4413fdfUL, 0xcd5a0e9eUL, 0x958424a2UL, 0x8c9f15e3UL, 0xa7b24620UL, - 0xbea97761UL, 0xf1e8e1a6UL, 0xe8f3d0e7UL, 0xc3de8324UL, 0xdac5b265UL, - 0x5d5daeaaUL, 0x44469febUL, 0x6f6bcc28UL, 0x7670fd69UL, 0x39316baeUL, - 0x202a5aefUL, 0x0b07092cUL, 0x121c386dUL, 0xdf4636f3UL, 0xc65d07b2UL, - 0xed705471UL, 0xf46b6530UL, 0xbb2af3f7UL, 0xa231c2b6UL, 0x891c9175UL, - 0x9007a034UL, 0x179fbcfbUL, 0x0e848dbaUL, 0x25a9de79UL, 0x3cb2ef38UL, - 0x73f379ffUL, 0x6ae848beUL, 0x41c51b7dUL, 0x58de2a3cUL, 0xf0794f05UL, - 0xe9627e44UL, 0xc24f2d87UL, 0xdb541cc6UL, 0x94158a01UL, 0x8d0ebb40UL, - 0xa623e883UL, 0xbf38d9c2UL, 0x38a0c50dUL, 0x21bbf44cUL, 0x0a96a78fUL, - 0x138d96ceUL, 0x5ccc0009UL, 0x45d73148UL, 0x6efa628bUL, 0x77e153caUL, - 0xbabb5d54UL, 0xa3a06c15UL, 0x888d3fd6UL, 0x91960e97UL, 0xded79850UL, - 0xc7cca911UL, 0xece1fad2UL, 0xf5facb93UL, 0x7262d75cUL, 0x6b79e61dUL, - 0x4054b5deUL, 0x594f849fUL, 0x160e1258UL, 0x0f152319UL, 0x243870daUL, - 0x3d23419bUL, 0x65fd6ba7UL, 0x7ce65ae6UL, 0x57cb0925UL, 0x4ed03864UL, - 0x0191aea3UL, 0x188a9fe2UL, 0x33a7cc21UL, 0x2abcfd60UL, 0xad24e1afUL, - 0xb43fd0eeUL, 0x9f12832dUL, 0x8609b26cUL, 0xc94824abUL, 0xd05315eaUL, - 0xfb7e4629UL, 0xe2657768UL, 0x2f3f79f6UL, 0x362448b7UL, 0x1d091b74UL, - 0x04122a35UL, 0x4b53bcf2UL, 0x52488db3UL, 0x7965de70UL, 0x607eef31UL, - 0xe7e6f3feUL, 0xfefdc2bfUL, 0xd5d0917cUL, 0xcccba03dUL, 0x838a36faUL, - 0x9a9107bbUL, 0xb1bc5478UL, 0xa8a76539UL, 0x3b83984bUL, 0x2298a90aUL, - 0x09b5fac9UL, 0x10aecb88UL, 0x5fef5d4fUL, 0x46f46c0eUL, 0x6dd93fcdUL, - 0x74c20e8cUL, 0xf35a1243UL, 0xea412302UL, 0xc16c70c1UL, 0xd8774180UL, - 0x9736d747UL, 0x8e2de606UL, 0xa500b5c5UL, 0xbc1b8484UL, 0x71418a1aUL, - 0x685abb5bUL, 0x4377e898UL, 0x5a6cd9d9UL, 0x152d4f1eUL, 0x0c367e5fUL, - 0x271b2d9cUL, 0x3e001cddUL, 0xb9980012UL, 0xa0833153UL, 0x8bae6290UL, - 0x92b553d1UL, 0xddf4c516UL, 0xc4eff457UL, 0xefc2a794UL, 0xf6d996d5UL, - 0xae07bce9UL, 0xb71c8da8UL, 0x9c31de6bUL, 0x852aef2aUL, 0xca6b79edUL, - 0xd37048acUL, 0xf85d1b6fUL, 0xe1462a2eUL, 0x66de36e1UL, 0x7fc507a0UL, - 0x54e85463UL, 0x4df36522UL, 0x02b2f3e5UL, 0x1ba9c2a4UL, 0x30849167UL, - 0x299fa026UL, 0xe4c5aeb8UL, 0xfdde9ff9UL, 0xd6f3cc3aUL, 0xcfe8fd7bUL, - 0x80a96bbcUL, 0x99b25afdUL, 0xb29f093eUL, 0xab84387fUL, 0x2c1c24b0UL, - 0x350715f1UL, 0x1e2a4632UL, 0x07317773UL, 0x4870e1b4UL, 0x516bd0f5UL, - 0x7a468336UL, 0x635db277UL, 0xcbfad74eUL, 0xd2e1e60fUL, 0xf9ccb5ccUL, - 0xe0d7848dUL, 0xaf96124aUL, 0xb68d230bUL, 0x9da070c8UL, 0x84bb4189UL, - 0x03235d46UL, 0x1a386c07UL, 0x31153fc4UL, 0x280e0e85UL, 0x674f9842UL, - 0x7e54a903UL, 0x5579fac0UL, 0x4c62cb81UL, 0x8138c51fUL, 0x9823f45eUL, - 0xb30ea79dUL, 0xaa1596dcUL, 0xe554001bUL, 0xfc4f315aUL, 0xd7626299UL, - 0xce7953d8UL, 0x49e14f17UL, 0x50fa7e56UL, 0x7bd72d95UL, 0x62cc1cd4UL, - 0x2d8d8a13UL, 0x3496bb52UL, 0x1fbbe891UL, 0x06a0d9d0UL, 0x5e7ef3ecUL, - 0x4765c2adUL, 0x6c48916eUL, 0x7553a02fUL, 0x3a1236e8UL, 0x230907a9UL, - 0x0824546aUL, 0x113f652bUL, 0x96a779e4UL, 0x8fbc48a5UL, 0xa4911b66UL, - 0xbd8a2a27UL, 0xf2cbbce0UL, 0xebd08da1UL, 0xc0fdde62UL, 0xd9e6ef23UL, - 0x14bce1bdUL, 0x0da7d0fcUL, 0x268a833fUL, 0x3f91b27eUL, 0x70d024b9UL, - 0x69cb15f8UL, 0x42e6463bUL, 0x5bfd777aUL, 0xdc656bb5UL, 0xc57e5af4UL, - 0xee530937UL, 0xf7483876UL, 0xb809aeb1UL, 0xa1129ff0UL, 0x8a3fcc33UL, - 0x9324fd72UL - }, - { - 0x00000000UL, 0x01c26a37UL, 0x0384d46eUL, 0x0246be59UL, 0x0709a8dcUL, - 0x06cbc2ebUL, 0x048d7cb2UL, 0x054f1685UL, 0x0e1351b8UL, 0x0fd13b8fUL, - 0x0d9785d6UL, 0x0c55efe1UL, 0x091af964UL, 0x08d89353UL, 0x0a9e2d0aUL, - 0x0b5c473dUL, 0x1c26a370UL, 0x1de4c947UL, 0x1fa2771eUL, 0x1e601d29UL, - 0x1b2f0bacUL, 0x1aed619bUL, 0x18abdfc2UL, 0x1969b5f5UL, 0x1235f2c8UL, - 0x13f798ffUL, 0x11b126a6UL, 0x10734c91UL, 0x153c5a14UL, 0x14fe3023UL, - 0x16b88e7aUL, 0x177ae44dUL, 0x384d46e0UL, 0x398f2cd7UL, 0x3bc9928eUL, - 0x3a0bf8b9UL, 0x3f44ee3cUL, 0x3e86840bUL, 0x3cc03a52UL, 0x3d025065UL, - 0x365e1758UL, 0x379c7d6fUL, 0x35dac336UL, 0x3418a901UL, 0x3157bf84UL, - 0x3095d5b3UL, 0x32d36beaUL, 0x331101ddUL, 0x246be590UL, 0x25a98fa7UL, - 0x27ef31feUL, 0x262d5bc9UL, 0x23624d4cUL, 0x22a0277bUL, 0x20e69922UL, - 0x2124f315UL, 0x2a78b428UL, 0x2bbade1fUL, 0x29fc6046UL, 0x283e0a71UL, - 0x2d711cf4UL, 0x2cb376c3UL, 0x2ef5c89aUL, 0x2f37a2adUL, 0x709a8dc0UL, - 0x7158e7f7UL, 0x731e59aeUL, 0x72dc3399UL, 0x7793251cUL, 0x76514f2bUL, - 0x7417f172UL, 0x75d59b45UL, 0x7e89dc78UL, 0x7f4bb64fUL, 0x7d0d0816UL, - 0x7ccf6221UL, 0x798074a4UL, 0x78421e93UL, 0x7a04a0caUL, 0x7bc6cafdUL, - 0x6cbc2eb0UL, 0x6d7e4487UL, 0x6f38fadeUL, 0x6efa90e9UL, 0x6bb5866cUL, - 0x6a77ec5bUL, 0x68315202UL, 0x69f33835UL, 0x62af7f08UL, 0x636d153fUL, - 0x612bab66UL, 0x60e9c151UL, 0x65a6d7d4UL, 0x6464bde3UL, 0x662203baUL, - 0x67e0698dUL, 0x48d7cb20UL, 0x4915a117UL, 0x4b531f4eUL, 0x4a917579UL, - 0x4fde63fcUL, 0x4e1c09cbUL, 0x4c5ab792UL, 0x4d98dda5UL, 0x46c49a98UL, - 0x4706f0afUL, 0x45404ef6UL, 0x448224c1UL, 0x41cd3244UL, 0x400f5873UL, - 0x4249e62aUL, 0x438b8c1dUL, 0x54f16850UL, 0x55330267UL, 0x5775bc3eUL, - 0x56b7d609UL, 0x53f8c08cUL, 0x523aaabbUL, 0x507c14e2UL, 0x51be7ed5UL, - 0x5ae239e8UL, 0x5b2053dfUL, 0x5966ed86UL, 0x58a487b1UL, 0x5deb9134UL, - 0x5c29fb03UL, 0x5e6f455aUL, 0x5fad2f6dUL, 0xe1351b80UL, 0xe0f771b7UL, - 0xe2b1cfeeUL, 0xe373a5d9UL, 0xe63cb35cUL, 0xe7fed96bUL, 0xe5b86732UL, - 0xe47a0d05UL, 0xef264a38UL, 0xeee4200fUL, 0xeca29e56UL, 0xed60f461UL, - 0xe82fe2e4UL, 0xe9ed88d3UL, 0xebab368aUL, 0xea695cbdUL, 0xfd13b8f0UL, - 0xfcd1d2c7UL, 0xfe976c9eUL, 0xff5506a9UL, 0xfa1a102cUL, 0xfbd87a1bUL, - 0xf99ec442UL, 0xf85cae75UL, 0xf300e948UL, 0xf2c2837fUL, 0xf0843d26UL, - 0xf1465711UL, 0xf4094194UL, 0xf5cb2ba3UL, 0xf78d95faUL, 0xf64fffcdUL, - 0xd9785d60UL, 0xd8ba3757UL, 0xdafc890eUL, 0xdb3ee339UL, 0xde71f5bcUL, - 0xdfb39f8bUL, 0xddf521d2UL, 0xdc374be5UL, 0xd76b0cd8UL, 0xd6a966efUL, - 0xd4efd8b6UL, 0xd52db281UL, 0xd062a404UL, 0xd1a0ce33UL, 0xd3e6706aUL, - 0xd2241a5dUL, 0xc55efe10UL, 0xc49c9427UL, 0xc6da2a7eUL, 0xc7184049UL, - 0xc25756ccUL, 0xc3953cfbUL, 0xc1d382a2UL, 0xc011e895UL, 0xcb4dafa8UL, - 0xca8fc59fUL, 0xc8c97bc6UL, 0xc90b11f1UL, 0xcc440774UL, 0xcd866d43UL, - 0xcfc0d31aUL, 0xce02b92dUL, 0x91af9640UL, 0x906dfc77UL, 0x922b422eUL, - 0x93e92819UL, 0x96a63e9cUL, 0x976454abUL, 0x9522eaf2UL, 0x94e080c5UL, - 0x9fbcc7f8UL, 0x9e7eadcfUL, 0x9c381396UL, 0x9dfa79a1UL, 0x98b56f24UL, - 0x99770513UL, 0x9b31bb4aUL, 0x9af3d17dUL, 0x8d893530UL, 0x8c4b5f07UL, - 0x8e0de15eUL, 0x8fcf8b69UL, 0x8a809decUL, 0x8b42f7dbUL, 0x89044982UL, - 0x88c623b5UL, 0x839a6488UL, 0x82580ebfUL, 0x801eb0e6UL, 0x81dcdad1UL, - 0x8493cc54UL, 0x8551a663UL, 0x8717183aUL, 0x86d5720dUL, 0xa9e2d0a0UL, - 0xa820ba97UL, 0xaa6604ceUL, 0xaba46ef9UL, 0xaeeb787cUL, 0xaf29124bUL, - 0xad6fac12UL, 0xacadc625UL, 0xa7f18118UL, 0xa633eb2fUL, 0xa4755576UL, - 0xa5b73f41UL, 0xa0f829c4UL, 0xa13a43f3UL, 0xa37cfdaaUL, 0xa2be979dUL, - 0xb5c473d0UL, 0xb40619e7UL, 0xb640a7beUL, 0xb782cd89UL, 0xb2cddb0cUL, - 0xb30fb13bUL, 0xb1490f62UL, 0xb08b6555UL, 0xbbd72268UL, 0xba15485fUL, - 0xb853f606UL, 0xb9919c31UL, 0xbcde8ab4UL, 0xbd1ce083UL, 0xbf5a5edaUL, - 0xbe9834edUL - }, - { - 0x00000000UL, 0xb8bc6765UL, 0xaa09c88bUL, 0x12b5afeeUL, 0x8f629757UL, - 0x37def032UL, 0x256b5fdcUL, 0x9dd738b9UL, 0xc5b428efUL, 0x7d084f8aUL, - 0x6fbde064UL, 0xd7018701UL, 0x4ad6bfb8UL, 0xf26ad8ddUL, 0xe0df7733UL, - 0x58631056UL, 0x5019579fUL, 0xe8a530faUL, 0xfa109f14UL, 0x42acf871UL, - 0xdf7bc0c8UL, 0x67c7a7adUL, 0x75720843UL, 0xcdce6f26UL, 0x95ad7f70UL, - 0x2d111815UL, 0x3fa4b7fbUL, 0x8718d09eUL, 0x1acfe827UL, 0xa2738f42UL, - 0xb0c620acUL, 0x087a47c9UL, 0xa032af3eUL, 0x188ec85bUL, 0x0a3b67b5UL, - 0xb28700d0UL, 0x2f503869UL, 0x97ec5f0cUL, 0x8559f0e2UL, 0x3de59787UL, - 0x658687d1UL, 0xdd3ae0b4UL, 0xcf8f4f5aUL, 0x7733283fUL, 0xeae41086UL, - 0x525877e3UL, 0x40edd80dUL, 0xf851bf68UL, 0xf02bf8a1UL, 0x48979fc4UL, - 0x5a22302aUL, 0xe29e574fUL, 0x7f496ff6UL, 0xc7f50893UL, 0xd540a77dUL, - 0x6dfcc018UL, 0x359fd04eUL, 0x8d23b72bUL, 0x9f9618c5UL, 0x272a7fa0UL, - 0xbafd4719UL, 0x0241207cUL, 0x10f48f92UL, 0xa848e8f7UL, 0x9b14583dUL, - 0x23a83f58UL, 0x311d90b6UL, 0x89a1f7d3UL, 0x1476cf6aUL, 0xaccaa80fUL, - 0xbe7f07e1UL, 0x06c36084UL, 0x5ea070d2UL, 0xe61c17b7UL, 0xf4a9b859UL, - 0x4c15df3cUL, 0xd1c2e785UL, 0x697e80e0UL, 0x7bcb2f0eUL, 0xc377486bUL, - 0xcb0d0fa2UL, 0x73b168c7UL, 0x6104c729UL, 0xd9b8a04cUL, 0x446f98f5UL, - 0xfcd3ff90UL, 0xee66507eUL, 0x56da371bUL, 0x0eb9274dUL, 0xb6054028UL, - 0xa4b0efc6UL, 0x1c0c88a3UL, 0x81dbb01aUL, 0x3967d77fUL, 0x2bd27891UL, - 0x936e1ff4UL, 0x3b26f703UL, 0x839a9066UL, 0x912f3f88UL, 0x299358edUL, - 0xb4446054UL, 0x0cf80731UL, 0x1e4da8dfUL, 0xa6f1cfbaUL, 0xfe92dfecUL, - 0x462eb889UL, 0x549b1767UL, 0xec277002UL, 0x71f048bbUL, 0xc94c2fdeUL, - 0xdbf98030UL, 0x6345e755UL, 0x6b3fa09cUL, 0xd383c7f9UL, 0xc1366817UL, - 0x798a0f72UL, 0xe45d37cbUL, 0x5ce150aeUL, 0x4e54ff40UL, 0xf6e89825UL, - 0xae8b8873UL, 0x1637ef16UL, 0x048240f8UL, 0xbc3e279dUL, 0x21e91f24UL, - 0x99557841UL, 0x8be0d7afUL, 0x335cb0caUL, 0xed59b63bUL, 0x55e5d15eUL, - 0x47507eb0UL, 0xffec19d5UL, 0x623b216cUL, 0xda874609UL, 0xc832e9e7UL, - 0x708e8e82UL, 0x28ed9ed4UL, 0x9051f9b1UL, 0x82e4565fUL, 0x3a58313aUL, - 0xa78f0983UL, 0x1f336ee6UL, 0x0d86c108UL, 0xb53aa66dUL, 0xbd40e1a4UL, - 0x05fc86c1UL, 0x1749292fUL, 0xaff54e4aUL, 0x322276f3UL, 0x8a9e1196UL, - 0x982bbe78UL, 0x2097d91dUL, 0x78f4c94bUL, 0xc048ae2eUL, 0xd2fd01c0UL, - 0x6a4166a5UL, 0xf7965e1cUL, 0x4f2a3979UL, 0x5d9f9697UL, 0xe523f1f2UL, - 0x4d6b1905UL, 0xf5d77e60UL, 0xe762d18eUL, 0x5fdeb6ebUL, 0xc2098e52UL, - 0x7ab5e937UL, 0x680046d9UL, 0xd0bc21bcUL, 0x88df31eaUL, 0x3063568fUL, - 0x22d6f961UL, 0x9a6a9e04UL, 0x07bda6bdUL, 0xbf01c1d8UL, 0xadb46e36UL, - 0x15080953UL, 0x1d724e9aUL, 0xa5ce29ffUL, 0xb77b8611UL, 0x0fc7e174UL, - 0x9210d9cdUL, 0x2aacbea8UL, 0x38191146UL, 0x80a57623UL, 0xd8c66675UL, - 0x607a0110UL, 0x72cfaefeUL, 0xca73c99bUL, 0x57a4f122UL, 0xef189647UL, - 0xfdad39a9UL, 0x45115eccUL, 0x764dee06UL, 0xcef18963UL, 0xdc44268dUL, - 0x64f841e8UL, 0xf92f7951UL, 0x41931e34UL, 0x5326b1daUL, 0xeb9ad6bfUL, - 0xb3f9c6e9UL, 0x0b45a18cUL, 0x19f00e62UL, 0xa14c6907UL, 0x3c9b51beUL, - 0x842736dbUL, 0x96929935UL, 0x2e2efe50UL, 0x2654b999UL, 0x9ee8defcUL, - 0x8c5d7112UL, 0x34e11677UL, 0xa9362eceUL, 0x118a49abUL, 0x033fe645UL, - 0xbb838120UL, 0xe3e09176UL, 0x5b5cf613UL, 0x49e959fdUL, 0xf1553e98UL, - 0x6c820621UL, 0xd43e6144UL, 0xc68bceaaUL, 0x7e37a9cfUL, 0xd67f4138UL, - 0x6ec3265dUL, 0x7c7689b3UL, 0xc4caeed6UL, 0x591dd66fUL, 0xe1a1b10aUL, - 0xf3141ee4UL, 0x4ba87981UL, 0x13cb69d7UL, 0xab770eb2UL, 0xb9c2a15cUL, - 0x017ec639UL, 0x9ca9fe80UL, 0x241599e5UL, 0x36a0360bUL, 0x8e1c516eUL, - 0x866616a7UL, 0x3eda71c2UL, 0x2c6fde2cUL, 0x94d3b949UL, 0x090481f0UL, - 0xb1b8e695UL, 0xa30d497bUL, 0x1bb12e1eUL, 0x43d23e48UL, 0xfb6e592dUL, - 0xe9dbf6c3UL, 0x516791a6UL, 0xccb0a91fUL, 0x740cce7aUL, 0x66b96194UL, - 0xde0506f1UL - }, - { - 0x00000000UL, 0x96300777UL, 0x2c610eeeUL, 0xba510999UL, 0x19c46d07UL, - 0x8ff46a70UL, 0x35a563e9UL, 0xa395649eUL, 0x3288db0eUL, 0xa4b8dc79UL, - 0x1ee9d5e0UL, 0x88d9d297UL, 0x2b4cb609UL, 0xbd7cb17eUL, 0x072db8e7UL, - 0x911dbf90UL, 0x6410b71dUL, 0xf220b06aUL, 0x4871b9f3UL, 0xde41be84UL, - 0x7dd4da1aUL, 0xebe4dd6dUL, 0x51b5d4f4UL, 0xc785d383UL, 0x56986c13UL, - 0xc0a86b64UL, 0x7af962fdUL, 0xecc9658aUL, 0x4f5c0114UL, 0xd96c0663UL, - 0x633d0ffaUL, 0xf50d088dUL, 0xc8206e3bUL, 0x5e10694cUL, 0xe44160d5UL, - 0x727167a2UL, 0xd1e4033cUL, 0x47d4044bUL, 0xfd850dd2UL, 0x6bb50aa5UL, - 0xfaa8b535UL, 0x6c98b242UL, 0xd6c9bbdbUL, 0x40f9bcacUL, 0xe36cd832UL, - 0x755cdf45UL, 0xcf0dd6dcUL, 0x593dd1abUL, 0xac30d926UL, 0x3a00de51UL, - 0x8051d7c8UL, 0x1661d0bfUL, 0xb5f4b421UL, 0x23c4b356UL, 0x9995bacfUL, - 0x0fa5bdb8UL, 0x9eb80228UL, 0x0888055fUL, 0xb2d90cc6UL, 0x24e90bb1UL, - 0x877c6f2fUL, 0x114c6858UL, 0xab1d61c1UL, 0x3d2d66b6UL, 0x9041dc76UL, - 0x0671db01UL, 0xbc20d298UL, 0x2a10d5efUL, 0x8985b171UL, 0x1fb5b606UL, - 0xa5e4bf9fUL, 0x33d4b8e8UL, 0xa2c90778UL, 0x34f9000fUL, 0x8ea80996UL, - 0x18980ee1UL, 0xbb0d6a7fUL, 0x2d3d6d08UL, 0x976c6491UL, 0x015c63e6UL, - 0xf4516b6bUL, 0x62616c1cUL, 0xd8306585UL, 0x4e0062f2UL, 0xed95066cUL, - 0x7ba5011bUL, 0xc1f40882UL, 0x57c40ff5UL, 0xc6d9b065UL, 0x50e9b712UL, - 0xeab8be8bUL, 0x7c88b9fcUL, 0xdf1ddd62UL, 0x492dda15UL, 0xf37cd38cUL, - 0x654cd4fbUL, 0x5861b24dUL, 0xce51b53aUL, 0x7400bca3UL, 0xe230bbd4UL, - 0x41a5df4aUL, 0xd795d83dUL, 0x6dc4d1a4UL, 0xfbf4d6d3UL, 0x6ae96943UL, - 0xfcd96e34UL, 0x468867adUL, 0xd0b860daUL, 0x732d0444UL, 0xe51d0333UL, - 0x5f4c0aaaUL, 0xc97c0dddUL, 0x3c710550UL, 0xaa410227UL, 0x10100bbeUL, - 0x86200cc9UL, 0x25b56857UL, 0xb3856f20UL, 0x09d466b9UL, 0x9fe461ceUL, - 0x0ef9de5eUL, 0x98c9d929UL, 0x2298d0b0UL, 0xb4a8d7c7UL, 0x173db359UL, - 0x810db42eUL, 0x3b5cbdb7UL, 0xad6cbac0UL, 0x2083b8edUL, 0xb6b3bf9aUL, - 0x0ce2b603UL, 0x9ad2b174UL, 0x3947d5eaUL, 0xaf77d29dUL, 0x1526db04UL, - 0x8316dc73UL, 0x120b63e3UL, 0x843b6494UL, 0x3e6a6d0dUL, 0xa85a6a7aUL, - 0x0bcf0ee4UL, 0x9dff0993UL, 0x27ae000aUL, 0xb19e077dUL, 0x44930ff0UL, - 0xd2a30887UL, 0x68f2011eUL, 0xfec20669UL, 0x5d5762f7UL, 0xcb676580UL, - 0x71366c19UL, 0xe7066b6eUL, 0x761bd4feUL, 0xe02bd389UL, 0x5a7ada10UL, - 0xcc4add67UL, 0x6fdfb9f9UL, 0xf9efbe8eUL, 0x43beb717UL, 0xd58eb060UL, - 0xe8a3d6d6UL, 0x7e93d1a1UL, 0xc4c2d838UL, 0x52f2df4fUL, 0xf167bbd1UL, - 0x6757bca6UL, 0xdd06b53fUL, 0x4b36b248UL, 0xda2b0dd8UL, 0x4c1b0aafUL, - 0xf64a0336UL, 0x607a0441UL, 0xc3ef60dfUL, 0x55df67a8UL, 0xef8e6e31UL, - 0x79be6946UL, 0x8cb361cbUL, 0x1a8366bcUL, 0xa0d26f25UL, 0x36e26852UL, - 0x95770cccUL, 0x03470bbbUL, 0xb9160222UL, 0x2f260555UL, 0xbe3bbac5UL, - 0x280bbdb2UL, 0x925ab42bUL, 0x046ab35cUL, 0xa7ffd7c2UL, 0x31cfd0b5UL, - 0x8b9ed92cUL, 0x1daede5bUL, 0xb0c2649bUL, 0x26f263ecUL, 0x9ca36a75UL, - 0x0a936d02UL, 0xa906099cUL, 0x3f360eebUL, 0x85670772UL, 0x13570005UL, - 0x824abf95UL, 0x147ab8e2UL, 0xae2bb17bUL, 0x381bb60cUL, 0x9b8ed292UL, - 0x0dbed5e5UL, 0xb7efdc7cUL, 0x21dfdb0bUL, 0xd4d2d386UL, 0x42e2d4f1UL, - 0xf8b3dd68UL, 0x6e83da1fUL, 0xcd16be81UL, 0x5b26b9f6UL, 0xe177b06fUL, - 0x7747b718UL, 0xe65a0888UL, 0x706a0fffUL, 0xca3b0666UL, 0x5c0b0111UL, - 0xff9e658fUL, 0x69ae62f8UL, 0xd3ff6b61UL, 0x45cf6c16UL, 0x78e20aa0UL, - 0xeed20dd7UL, 0x5483044eUL, 0xc2b30339UL, 0x612667a7UL, 0xf71660d0UL, - 0x4d476949UL, 0xdb776e3eUL, 0x4a6ad1aeUL, 0xdc5ad6d9UL, 0x660bdf40UL, - 0xf03bd837UL, 0x53aebca9UL, 0xc59ebbdeUL, 0x7fcfb247UL, 0xe9ffb530UL, - 0x1cf2bdbdUL, 0x8ac2bacaUL, 0x3093b353UL, 0xa6a3b424UL, 0x0536d0baUL, - 0x9306d7cdUL, 0x2957de54UL, 0xbf67d923UL, 0x2e7a66b3UL, 0xb84a61c4UL, - 0x021b685dUL, 0x942b6f2aUL, 0x37be0bb4UL, 0xa18e0cc3UL, 0x1bdf055aUL, - 0x8def022dUL - }, - { - 0x00000000UL, 0x41311b19UL, 0x82623632UL, 0xc3532d2bUL, 0x04c56c64UL, - 0x45f4777dUL, 0x86a75a56UL, 0xc796414fUL, 0x088ad9c8UL, 0x49bbc2d1UL, - 0x8ae8effaUL, 0xcbd9f4e3UL, 0x0c4fb5acUL, 0x4d7eaeb5UL, 0x8e2d839eUL, - 0xcf1c9887UL, 0x5112c24aUL, 0x1023d953UL, 0xd370f478UL, 0x9241ef61UL, - 0x55d7ae2eUL, 0x14e6b537UL, 0xd7b5981cUL, 0x96848305UL, 0x59981b82UL, - 0x18a9009bUL, 0xdbfa2db0UL, 0x9acb36a9UL, 0x5d5d77e6UL, 0x1c6c6cffUL, - 0xdf3f41d4UL, 0x9e0e5acdUL, 0xa2248495UL, 0xe3159f8cUL, 0x2046b2a7UL, - 0x6177a9beUL, 0xa6e1e8f1UL, 0xe7d0f3e8UL, 0x2483dec3UL, 0x65b2c5daUL, - 0xaaae5d5dUL, 0xeb9f4644UL, 0x28cc6b6fUL, 0x69fd7076UL, 0xae6b3139UL, - 0xef5a2a20UL, 0x2c09070bUL, 0x6d381c12UL, 0xf33646dfUL, 0xb2075dc6UL, - 0x715470edUL, 0x30656bf4UL, 0xf7f32abbUL, 0xb6c231a2UL, 0x75911c89UL, - 0x34a00790UL, 0xfbbc9f17UL, 0xba8d840eUL, 0x79dea925UL, 0x38efb23cUL, - 0xff79f373UL, 0xbe48e86aUL, 0x7d1bc541UL, 0x3c2ade58UL, 0x054f79f0UL, - 0x447e62e9UL, 0x872d4fc2UL, 0xc61c54dbUL, 0x018a1594UL, 0x40bb0e8dUL, - 0x83e823a6UL, 0xc2d938bfUL, 0x0dc5a038UL, 0x4cf4bb21UL, 0x8fa7960aUL, - 0xce968d13UL, 0x0900cc5cUL, 0x4831d745UL, 0x8b62fa6eUL, 0xca53e177UL, - 0x545dbbbaUL, 0x156ca0a3UL, 0xd63f8d88UL, 0x970e9691UL, 0x5098d7deUL, - 0x11a9ccc7UL, 0xd2fae1ecUL, 0x93cbfaf5UL, 0x5cd76272UL, 0x1de6796bUL, - 0xdeb55440UL, 0x9f844f59UL, 0x58120e16UL, 0x1923150fUL, 0xda703824UL, - 0x9b41233dUL, 0xa76bfd65UL, 0xe65ae67cUL, 0x2509cb57UL, 0x6438d04eUL, - 0xa3ae9101UL, 0xe29f8a18UL, 0x21cca733UL, 0x60fdbc2aUL, 0xafe124adUL, - 0xeed03fb4UL, 0x2d83129fUL, 0x6cb20986UL, 0xab2448c9UL, 0xea1553d0UL, - 0x29467efbUL, 0x687765e2UL, 0xf6793f2fUL, 0xb7482436UL, 0x741b091dUL, - 0x352a1204UL, 0xf2bc534bUL, 0xb38d4852UL, 0x70de6579UL, 0x31ef7e60UL, - 0xfef3e6e7UL, 0xbfc2fdfeUL, 0x7c91d0d5UL, 0x3da0cbccUL, 0xfa368a83UL, - 0xbb07919aUL, 0x7854bcb1UL, 0x3965a7a8UL, 0x4b98833bUL, 0x0aa99822UL, - 0xc9fab509UL, 0x88cbae10UL, 0x4f5def5fUL, 0x0e6cf446UL, 0xcd3fd96dUL, - 0x8c0ec274UL, 0x43125af3UL, 0x022341eaUL, 0xc1706cc1UL, 0x804177d8UL, - 0x47d73697UL, 0x06e62d8eUL, 0xc5b500a5UL, 0x84841bbcUL, 0x1a8a4171UL, - 0x5bbb5a68UL, 0x98e87743UL, 0xd9d96c5aUL, 0x1e4f2d15UL, 0x5f7e360cUL, - 0x9c2d1b27UL, 0xdd1c003eUL, 0x120098b9UL, 0x533183a0UL, 0x9062ae8bUL, - 0xd153b592UL, 0x16c5f4ddUL, 0x57f4efc4UL, 0x94a7c2efUL, 0xd596d9f6UL, - 0xe9bc07aeUL, 0xa88d1cb7UL, 0x6bde319cUL, 0x2aef2a85UL, 0xed796bcaUL, - 0xac4870d3UL, 0x6f1b5df8UL, 0x2e2a46e1UL, 0xe136de66UL, 0xa007c57fUL, - 0x6354e854UL, 0x2265f34dUL, 0xe5f3b202UL, 0xa4c2a91bUL, 0x67918430UL, - 0x26a09f29UL, 0xb8aec5e4UL, 0xf99fdefdUL, 0x3accf3d6UL, 0x7bfde8cfUL, - 0xbc6ba980UL, 0xfd5ab299UL, 0x3e099fb2UL, 0x7f3884abUL, 0xb0241c2cUL, - 0xf1150735UL, 0x32462a1eUL, 0x73773107UL, 0xb4e17048UL, 0xf5d06b51UL, - 0x3683467aUL, 0x77b25d63UL, 0x4ed7facbUL, 0x0fe6e1d2UL, 0xccb5ccf9UL, - 0x8d84d7e0UL, 0x4a1296afUL, 0x0b238db6UL, 0xc870a09dUL, 0x8941bb84UL, - 0x465d2303UL, 0x076c381aUL, 0xc43f1531UL, 0x850e0e28UL, 0x42984f67UL, - 0x03a9547eUL, 0xc0fa7955UL, 0x81cb624cUL, 0x1fc53881UL, 0x5ef42398UL, - 0x9da70eb3UL, 0xdc9615aaUL, 0x1b0054e5UL, 0x5a314ffcUL, 0x996262d7UL, - 0xd85379ceUL, 0x174fe149UL, 0x567efa50UL, 0x952dd77bUL, 0xd41ccc62UL, - 0x138a8d2dUL, 0x52bb9634UL, 0x91e8bb1fUL, 0xd0d9a006UL, 0xecf37e5eUL, - 0xadc26547UL, 0x6e91486cUL, 0x2fa05375UL, 0xe836123aUL, 0xa9070923UL, - 0x6a542408UL, 0x2b653f11UL, 0xe479a796UL, 0xa548bc8fUL, 0x661b91a4UL, - 0x272a8abdUL, 0xe0bccbf2UL, 0xa18dd0ebUL, 0x62defdc0UL, 0x23efe6d9UL, - 0xbde1bc14UL, 0xfcd0a70dUL, 0x3f838a26UL, 0x7eb2913fUL, 0xb924d070UL, - 0xf815cb69UL, 0x3b46e642UL, 0x7a77fd5bUL, 0xb56b65dcUL, 0xf45a7ec5UL, - 0x370953eeUL, 0x763848f7UL, 0xb1ae09b8UL, 0xf09f12a1UL, 0x33cc3f8aUL, - 0x72fd2493UL - }, - { - 0x00000000UL, 0x376ac201UL, 0x6ed48403UL, 0x59be4602UL, 0xdca80907UL, - 0xebc2cb06UL, 0xb27c8d04UL, 0x85164f05UL, 0xb851130eUL, 0x8f3bd10fUL, - 0xd685970dUL, 0xe1ef550cUL, 0x64f91a09UL, 0x5393d808UL, 0x0a2d9e0aUL, - 0x3d475c0bUL, 0x70a3261cUL, 0x47c9e41dUL, 0x1e77a21fUL, 0x291d601eUL, - 0xac0b2f1bUL, 0x9b61ed1aUL, 0xc2dfab18UL, 0xf5b56919UL, 0xc8f23512UL, - 0xff98f713UL, 0xa626b111UL, 0x914c7310UL, 0x145a3c15UL, 0x2330fe14UL, - 0x7a8eb816UL, 0x4de47a17UL, 0xe0464d38UL, 0xd72c8f39UL, 0x8e92c93bUL, - 0xb9f80b3aUL, 0x3cee443fUL, 0x0b84863eUL, 0x523ac03cUL, 0x6550023dUL, - 0x58175e36UL, 0x6f7d9c37UL, 0x36c3da35UL, 0x01a91834UL, 0x84bf5731UL, - 0xb3d59530UL, 0xea6bd332UL, 0xdd011133UL, 0x90e56b24UL, 0xa78fa925UL, - 0xfe31ef27UL, 0xc95b2d26UL, 0x4c4d6223UL, 0x7b27a022UL, 0x2299e620UL, - 0x15f32421UL, 0x28b4782aUL, 0x1fdeba2bUL, 0x4660fc29UL, 0x710a3e28UL, - 0xf41c712dUL, 0xc376b32cUL, 0x9ac8f52eUL, 0xada2372fUL, 0xc08d9a70UL, - 0xf7e75871UL, 0xae591e73UL, 0x9933dc72UL, 0x1c259377UL, 0x2b4f5176UL, - 0x72f11774UL, 0x459bd575UL, 0x78dc897eUL, 0x4fb64b7fUL, 0x16080d7dUL, - 0x2162cf7cUL, 0xa4748079UL, 0x931e4278UL, 0xcaa0047aUL, 0xfdcac67bUL, - 0xb02ebc6cUL, 0x87447e6dUL, 0xdefa386fUL, 0xe990fa6eUL, 0x6c86b56bUL, - 0x5bec776aUL, 0x02523168UL, 0x3538f369UL, 0x087faf62UL, 0x3f156d63UL, - 0x66ab2b61UL, 0x51c1e960UL, 0xd4d7a665UL, 0xe3bd6464UL, 0xba032266UL, - 0x8d69e067UL, 0x20cbd748UL, 0x17a11549UL, 0x4e1f534bUL, 0x7975914aUL, - 0xfc63de4fUL, 0xcb091c4eUL, 0x92b75a4cUL, 0xa5dd984dUL, 0x989ac446UL, - 0xaff00647UL, 0xf64e4045UL, 0xc1248244UL, 0x4432cd41UL, 0x73580f40UL, - 0x2ae64942UL, 0x1d8c8b43UL, 0x5068f154UL, 0x67023355UL, 0x3ebc7557UL, - 0x09d6b756UL, 0x8cc0f853UL, 0xbbaa3a52UL, 0xe2147c50UL, 0xd57ebe51UL, - 0xe839e25aUL, 0xdf53205bUL, 0x86ed6659UL, 0xb187a458UL, 0x3491eb5dUL, - 0x03fb295cUL, 0x5a456f5eUL, 0x6d2fad5fUL, 0x801b35e1UL, 0xb771f7e0UL, - 0xeecfb1e2UL, 0xd9a573e3UL, 0x5cb33ce6UL, 0x6bd9fee7UL, 0x3267b8e5UL, - 0x050d7ae4UL, 0x384a26efUL, 0x0f20e4eeUL, 0x569ea2ecUL, 0x61f460edUL, - 0xe4e22fe8UL, 0xd388ede9UL, 0x8a36abebUL, 0xbd5c69eaUL, 0xf0b813fdUL, - 0xc7d2d1fcUL, 0x9e6c97feUL, 0xa90655ffUL, 0x2c101afaUL, 0x1b7ad8fbUL, - 0x42c49ef9UL, 0x75ae5cf8UL, 0x48e900f3UL, 0x7f83c2f2UL, 0x263d84f0UL, - 0x115746f1UL, 0x944109f4UL, 0xa32bcbf5UL, 0xfa958df7UL, 0xcdff4ff6UL, - 0x605d78d9UL, 0x5737bad8UL, 0x0e89fcdaUL, 0x39e33edbUL, 0xbcf571deUL, - 0x8b9fb3dfUL, 0xd221f5ddUL, 0xe54b37dcUL, 0xd80c6bd7UL, 0xef66a9d6UL, - 0xb6d8efd4UL, 0x81b22dd5UL, 0x04a462d0UL, 0x33cea0d1UL, 0x6a70e6d3UL, - 0x5d1a24d2UL, 0x10fe5ec5UL, 0x27949cc4UL, 0x7e2adac6UL, 0x494018c7UL, - 0xcc5657c2UL, 0xfb3c95c3UL, 0xa282d3c1UL, 0x95e811c0UL, 0xa8af4dcbUL, - 0x9fc58fcaUL, 0xc67bc9c8UL, 0xf1110bc9UL, 0x740744ccUL, 0x436d86cdUL, - 0x1ad3c0cfUL, 0x2db902ceUL, 0x4096af91UL, 0x77fc6d90UL, 0x2e422b92UL, - 0x1928e993UL, 0x9c3ea696UL, 0xab546497UL, 0xf2ea2295UL, 0xc580e094UL, - 0xf8c7bc9fUL, 0xcfad7e9eUL, 0x9613389cUL, 0xa179fa9dUL, 0x246fb598UL, - 0x13057799UL, 0x4abb319bUL, 0x7dd1f39aUL, 0x3035898dUL, 0x075f4b8cUL, - 0x5ee10d8eUL, 0x698bcf8fUL, 0xec9d808aUL, 0xdbf7428bUL, 0x82490489UL, - 0xb523c688UL, 0x88649a83UL, 0xbf0e5882UL, 0xe6b01e80UL, 0xd1dadc81UL, - 0x54cc9384UL, 0x63a65185UL, 0x3a181787UL, 0x0d72d586UL, 0xa0d0e2a9UL, - 0x97ba20a8UL, 0xce0466aaUL, 0xf96ea4abUL, 0x7c78ebaeUL, 0x4b1229afUL, - 0x12ac6fadUL, 0x25c6adacUL, 0x1881f1a7UL, 0x2feb33a6UL, 0x765575a4UL, - 0x413fb7a5UL, 0xc429f8a0UL, 0xf3433aa1UL, 0xaafd7ca3UL, 0x9d97bea2UL, - 0xd073c4b5UL, 0xe71906b4UL, 0xbea740b6UL, 0x89cd82b7UL, 0x0cdbcdb2UL, - 0x3bb10fb3UL, 0x620f49b1UL, 0x55658bb0UL, 0x6822d7bbUL, 0x5f4815baUL, - 0x06f653b8UL, 0x319c91b9UL, 0xb48adebcUL, 0x83e01cbdUL, 0xda5e5abfUL, - 0xed3498beUL - }, - { - 0x00000000UL, 0x6567bcb8UL, 0x8bc809aaUL, 0xeeafb512UL, 0x5797628fUL, - 0x32f0de37UL, 0xdc5f6b25UL, 0xb938d79dUL, 0xef28b4c5UL, 0x8a4f087dUL, - 0x64e0bd6fUL, 0x018701d7UL, 0xb8bfd64aUL, 0xddd86af2UL, 0x3377dfe0UL, - 0x56106358UL, 0x9f571950UL, 0xfa30a5e8UL, 0x149f10faUL, 0x71f8ac42UL, - 0xc8c07bdfUL, 0xada7c767UL, 0x43087275UL, 0x266fcecdUL, 0x707fad95UL, - 0x1518112dUL, 0xfbb7a43fUL, 0x9ed01887UL, 0x27e8cf1aUL, 0x428f73a2UL, - 0xac20c6b0UL, 0xc9477a08UL, 0x3eaf32a0UL, 0x5bc88e18UL, 0xb5673b0aUL, - 0xd00087b2UL, 0x6938502fUL, 0x0c5fec97UL, 0xe2f05985UL, 0x8797e53dUL, - 0xd1878665UL, 0xb4e03addUL, 0x5a4f8fcfUL, 0x3f283377UL, 0x8610e4eaUL, - 0xe3775852UL, 0x0dd8ed40UL, 0x68bf51f8UL, 0xa1f82bf0UL, 0xc49f9748UL, - 0x2a30225aUL, 0x4f579ee2UL, 0xf66f497fUL, 0x9308f5c7UL, 0x7da740d5UL, - 0x18c0fc6dUL, 0x4ed09f35UL, 0x2bb7238dUL, 0xc518969fUL, 0xa07f2a27UL, - 0x1947fdbaUL, 0x7c204102UL, 0x928ff410UL, 0xf7e848a8UL, 0x3d58149bUL, - 0x583fa823UL, 0xb6901d31UL, 0xd3f7a189UL, 0x6acf7614UL, 0x0fa8caacUL, - 0xe1077fbeUL, 0x8460c306UL, 0xd270a05eUL, 0xb7171ce6UL, 0x59b8a9f4UL, - 0x3cdf154cUL, 0x85e7c2d1UL, 0xe0807e69UL, 0x0e2fcb7bUL, 0x6b4877c3UL, - 0xa20f0dcbUL, 0xc768b173UL, 0x29c70461UL, 0x4ca0b8d9UL, 0xf5986f44UL, - 0x90ffd3fcUL, 0x7e5066eeUL, 0x1b37da56UL, 0x4d27b90eUL, 0x284005b6UL, - 0xc6efb0a4UL, 0xa3880c1cUL, 0x1ab0db81UL, 0x7fd76739UL, 0x9178d22bUL, - 0xf41f6e93UL, 0x03f7263bUL, 0x66909a83UL, 0x883f2f91UL, 0xed589329UL, - 0x546044b4UL, 0x3107f80cUL, 0xdfa84d1eUL, 0xbacff1a6UL, 0xecdf92feUL, - 0x89b82e46UL, 0x67179b54UL, 0x027027ecUL, 0xbb48f071UL, 0xde2f4cc9UL, - 0x3080f9dbUL, 0x55e74563UL, 0x9ca03f6bUL, 0xf9c783d3UL, 0x176836c1UL, - 0x720f8a79UL, 0xcb375de4UL, 0xae50e15cUL, 0x40ff544eUL, 0x2598e8f6UL, - 0x73888baeUL, 0x16ef3716UL, 0xf8408204UL, 0x9d273ebcUL, 0x241fe921UL, - 0x41785599UL, 0xafd7e08bUL, 0xcab05c33UL, 0x3bb659edUL, 0x5ed1e555UL, - 0xb07e5047UL, 0xd519ecffUL, 0x6c213b62UL, 0x094687daUL, 0xe7e932c8UL, - 0x828e8e70UL, 0xd49eed28UL, 0xb1f95190UL, 0x5f56e482UL, 0x3a31583aUL, - 0x83098fa7UL, 0xe66e331fUL, 0x08c1860dUL, 0x6da63ab5UL, 0xa4e140bdUL, - 0xc186fc05UL, 0x2f294917UL, 0x4a4ef5afUL, 0xf3762232UL, 0x96119e8aUL, - 0x78be2b98UL, 0x1dd99720UL, 0x4bc9f478UL, 0x2eae48c0UL, 0xc001fdd2UL, - 0xa566416aUL, 0x1c5e96f7UL, 0x79392a4fUL, 0x97969f5dUL, 0xf2f123e5UL, - 0x05196b4dUL, 0x607ed7f5UL, 0x8ed162e7UL, 0xebb6de5fUL, 0x528e09c2UL, - 0x37e9b57aUL, 0xd9460068UL, 0xbc21bcd0UL, 0xea31df88UL, 0x8f566330UL, - 0x61f9d622UL, 0x049e6a9aUL, 0xbda6bd07UL, 0xd8c101bfUL, 0x366eb4adUL, - 0x53090815UL, 0x9a4e721dUL, 0xff29cea5UL, 0x11867bb7UL, 0x74e1c70fUL, - 0xcdd91092UL, 0xa8beac2aUL, 0x46111938UL, 0x2376a580UL, 0x7566c6d8UL, - 0x10017a60UL, 0xfeaecf72UL, 0x9bc973caUL, 0x22f1a457UL, 0x479618efUL, - 0xa939adfdUL, 0xcc5e1145UL, 0x06ee4d76UL, 0x6389f1ceUL, 0x8d2644dcUL, - 0xe841f864UL, 0x51792ff9UL, 0x341e9341UL, 0xdab12653UL, 0xbfd69aebUL, - 0xe9c6f9b3UL, 0x8ca1450bUL, 0x620ef019UL, 0x07694ca1UL, 0xbe519b3cUL, - 0xdb362784UL, 0x35999296UL, 0x50fe2e2eUL, 0x99b95426UL, 0xfcdee89eUL, - 0x12715d8cUL, 0x7716e134UL, 0xce2e36a9UL, 0xab498a11UL, 0x45e63f03UL, - 0x208183bbUL, 0x7691e0e3UL, 0x13f65c5bUL, 0xfd59e949UL, 0x983e55f1UL, - 0x2106826cUL, 0x44613ed4UL, 0xaace8bc6UL, 0xcfa9377eUL, 0x38417fd6UL, - 0x5d26c36eUL, 0xb389767cUL, 0xd6eecac4UL, 0x6fd61d59UL, 0x0ab1a1e1UL, - 0xe41e14f3UL, 0x8179a84bUL, 0xd769cb13UL, 0xb20e77abUL, 0x5ca1c2b9UL, - 0x39c67e01UL, 0x80fea99cUL, 0xe5991524UL, 0x0b36a036UL, 0x6e511c8eUL, - 0xa7166686UL, 0xc271da3eUL, 0x2cde6f2cUL, 0x49b9d394UL, 0xf0810409UL, - 0x95e6b8b1UL, 0x7b490da3UL, 0x1e2eb11bUL, 0x483ed243UL, 0x2d596efbUL, - 0xc3f6dbe9UL, 0xa6916751UL, 0x1fa9b0ccUL, 0x7ace0c74UL, 0x9461b966UL, - 0xf10605deUL -#endif - } -}; diff --git a/sdk-modifications/libsrc/zlib/deflate.c b/sdk-modifications/libsrc/zlib/deflate.c deleted file mode 100755 index 8bd480e..0000000 --- a/sdk-modifications/libsrc/zlib/deflate.c +++ /dev/null @@ -1,1965 +0,0 @@ -/* deflate.c -- compress data using the deflation algorithm - * Copyright (C) 1995-2012 Jean-loup Gailly and Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* - * ALGORITHM - * - * The "deflation" process depends on being able to identify portions - * of the input text which are identical to earlier input (within a - * sliding window trailing behind the input currently being processed). - * - * The most straightforward technique turns out to be the fastest for - * most input files: try all possible matches and select the longest. - * The key feature of this algorithm is that insertions into the string - * dictionary are very simple and thus fast, and deletions are avoided - * completely. Insertions are performed at each input character, whereas - * string matches are performed only when the previous match ends. So it - * is preferable to spend more time in matches to allow very fast string - * insertions and avoid deletions. The matching algorithm for small - * strings is inspired from that of Rabin & Karp. A brute force approach - * is used to find longer strings when a small match has been found. - * A similar algorithm is used in comic (by Jan-Mark Wams) and freeze - * (by Leonid Broukhis). - * A previous version of this file used a more sophisticated algorithm - * (by Fiala and Greene) which is guaranteed to run in linear amortized - * time, but has a larger average cost, uses more memory and is patented. - * However the F&G algorithm may be faster for some highly redundant - * files if the parameter max_chain_length (described below) is too large. - * - * ACKNOWLEDGEMENTS - * - * The idea of lazy evaluation of matches is due to Jan-Mark Wams, and - * I found it in 'freeze' written by Leonid Broukhis. - * Thanks to many people for bug reports and testing. - * - * REFERENCES - * - * Deutsch, L.P.,"DEFLATE Compressed Data Format Specification". - * Available in http://tools.ietf.org/html/rfc1951 - * - * A description of the Rabin and Karp algorithm is given in the book - * "Algorithms" by R. Sedgewick, Addison-Wesley, p252. - * - * Fiala,E.R., and Greene,D.H. - * Data Compression with Finite Windows, Comm.ACM, 32,4 (1989) 490-595 - * - */ - -/* @(#) $Id$ */ - -#include "deflate.h" - -const char deflate_copyright[] = - " deflate 1.2.6 Copyright 1995-2012 Jean-loup Gailly and Mark Adler "; -/* - If you use the zlib library in a product, an acknowledgment is welcome - in the documentation of your product. If for some reason you cannot - include such an acknowledgment, I would appreciate that you keep this - copyright string in the executable of your product. - */ - -/* =========================================================================== - * Function prototypes. - */ -typedef enum { - need_more, /* block not completed, need more input or more output */ - block_done, /* block flush performed */ - finish_started, /* finish started, need only more output at next deflate */ - finish_done /* finish done, accept no more input or output */ -} block_state; - -typedef block_state (*compress_func) OF((deflate_state *s, int flush)); -/* Compression function. Returns the block state after the call. */ - -local void fill_window OF((deflate_state *s)); -local block_state deflate_stored OF((deflate_state *s, int flush)); -local block_state deflate_fast OF((deflate_state *s, int flush)); -#ifndef FASTEST -local block_state deflate_slow OF((deflate_state *s, int flush)); -#endif -local block_state deflate_rle OF((deflate_state *s, int flush)); -local block_state deflate_huff OF((deflate_state *s, int flush)); -local void lm_init OF((deflate_state *s)); -local void putShortMSB OF((deflate_state *s, uInt b)); -local void flush_pending OF((z_streamp strm)); -local int read_buf OF((z_streamp strm, Bytef *buf, unsigned size)); -#ifdef ASMV - void match_init OF((void)); /* asm code initialization */ - uInt longest_match OF((deflate_state *s, IPos cur_match)); -#else -local uInt longest_match OF((deflate_state *s, IPos cur_match)); -#endif - -#ifdef DEBUG -local void check_match OF((deflate_state *s, IPos start, IPos match, - int length)); -#endif - -/* =========================================================================== - * Local data - */ - -#define NIL 0 -/* Tail of hash chains */ - -#ifndef TOO_FAR -# define TOO_FAR 4096 -#endif -/* Matches of length 3 are discarded if their distance exceeds TOO_FAR */ - -/* Values for max_lazy_match, good_match and max_chain_length, depending on - * the desired pack level (0..9). The values given below have been tuned to - * exclude worst case performance for pathological files. Better values may be - * found for specific files. - */ -typedef struct config_s { - ush good_length; /* reduce lazy search above this match length */ - ush max_lazy; /* do not perform lazy search above this match length */ - ush nice_length; /* quit search above this match length */ - ush max_chain; - compress_func func; -} config; - -#ifdef FASTEST -local const config configuration_table[2] = { -/* good lazy nice chain */ -/* 0 */ {0, 0, 0, 0, deflate_stored}, /* store only */ -/* 1 */ {4, 4, 8, 4, deflate_fast}}; /* max speed, no lazy matches */ -#else -local const config configuration_table[10] = { -/* good lazy nice chain */ -/* 0 */ {0, 0, 0, 0, deflate_stored}, /* store only */ -/* 1 */ {4, 4, 8, 4, deflate_fast}, /* max speed, no lazy matches */ -/* 2 */ {4, 5, 16, 8, deflate_fast}, -/* 3 */ {4, 6, 32, 32, deflate_fast}, - -/* 4 */ {4, 4, 16, 16, deflate_slow}, /* lazy matches */ -/* 5 */ {8, 16, 32, 32, deflate_slow}, -/* 6 */ {8, 16, 128, 128, deflate_slow}, -/* 7 */ {8, 32, 128, 256, deflate_slow}, -/* 8 */ {32, 128, 258, 1024, deflate_slow}, -/* 9 */ {32, 258, 258, 4096, deflate_slow}}; /* max compression */ -#endif - -/* Note: the deflate() code requires max_lazy >= MIN_MATCH and max_chain >= 4 - * For deflate_fast() (levels <= 3) good is ignored and lazy has a different - * meaning. - */ - -#define EQUAL 0 -/* result of memcmp for equal strings */ - -#ifndef NO_DUMMY_DECL -struct static_tree_desc_s {int dummy;}; /* for buggy compilers */ -#endif - -/* rank Z_BLOCK between Z_NO_FLUSH and Z_PARTIAL_FLUSH */ -#define RANK(f) (((f) << 1) - ((f) > 4 ? 9 : 0)) - -/* =========================================================================== - * Update a hash value with the given input byte - * IN assertion: all calls to to UPDATE_HASH are made with consecutive - * input characters, so that a running hash key can be computed from the - * previous key instead of complete recalculation each time. - */ -#define UPDATE_HASH(s,h,c) (h = (((h)<<s->hash_shift) ^ (c)) & s->hash_mask) - - -/* =========================================================================== - * Insert string str in the dictionary and set match_head to the previous head - * of the hash chain (the most recent string with same hash key). Return - * the previous length of the hash chain. - * If this file is compiled with -DFASTEST, the compression level is forced - * to 1, and no hash chains are maintained. - * IN assertion: all calls to to INSERT_STRING are made with consecutive - * input characters and the first MIN_MATCH bytes of str are valid - * (except for the last MIN_MATCH-1 bytes of the input file). - */ -#ifdef FASTEST -#define INSERT_STRING(s, str, match_head) \ - (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \ - match_head = s->head[s->ins_h], \ - s->head[s->ins_h] = (Pos)(str)) -#else -#define INSERT_STRING(s, str, match_head) \ - (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \ - match_head = s->prev[(str) & s->w_mask] = s->head[s->ins_h], \ - s->head[s->ins_h] = (Pos)(str)) -#endif - -/* =========================================================================== - * Initialize the hash table (avoiding 64K overflow for 16 bit systems). - * prev[] will be initialized on the fly. - */ -#define CLEAR_HASH(s) \ - s->head[s->hash_size-1] = NIL; \ - zmemzero((Bytef *)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head)); - -/* ========================================================================= */ -int ZEXPORT deflateInit_(strm, level, version, stream_size) - z_streamp strm; - int level; - const char *version; - int stream_size; -{ - return deflateInit2_(strm, level, Z_DEFLATED, MAX_WBITS, DEF_MEM_LEVEL, - Z_DEFAULT_STRATEGY, version, stream_size); - /* To do: ignore strm->next_in if we use it as window */ -} - -/* ========================================================================= */ -int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy, - version, stream_size) - z_streamp strm; - int level; - int method; - int windowBits; - int memLevel; - int strategy; - const char *version; - int stream_size; -{ - deflate_state *s; - int wrap = 1; - static const char my_version[] = ZLIB_VERSION; - - ushf *overlay; - /* We overlay pending_buf and d_buf+l_buf. This works since the average - * output size for (length,distance) codes is <= 24 bits. - */ - - if (version == Z_NULL || version[0] != my_version[0] || - stream_size != sizeof(z_stream)) { - return Z_VERSION_ERROR; - } - if (strm == Z_NULL) return Z_STREAM_ERROR; - - strm->msg = Z_NULL; - if (strm->zalloc == (alloc_func)0) { -#ifdef Z_SOLO - return Z_STREAM_ERROR; -#else - strm->zalloc = zcalloc; - strm->opaque = (voidpf)0; -#endif - } - if (strm->zfree == (free_func)0) -#ifdef Z_SOLO - return Z_STREAM_ERROR; -#else - strm->zfree = zcfree; -#endif - -#ifdef FASTEST - if (level != 0) level = 1; -#else - if (level == Z_DEFAULT_COMPRESSION) level = 6; -#endif - - if (windowBits < 0) { /* suppress zlib wrapper */ - wrap = 0; - windowBits = -windowBits; - } -#ifdef GZIP - else if (windowBits > 15) { - wrap = 2; /* write gzip wrapper instead */ - windowBits -= 16; - } -#endif - if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || method != Z_DEFLATED || - windowBits < 8 || windowBits > 15 || level < 0 || level > 9 || - strategy < 0 || strategy > Z_FIXED) { - return Z_STREAM_ERROR; - } - if (windowBits == 8) windowBits = 9; /* until 256-byte window bug fixed */ - s = (deflate_state *) ZALLOC(strm, 1, sizeof(deflate_state)); - if (s == Z_NULL) return Z_MEM_ERROR; - strm->state = (struct internal_state FAR *)s; - s->strm = strm; - - s->wrap = wrap; - s->gzhead = Z_NULL; - s->w_bits = windowBits; - s->w_size = 1 << s->w_bits; - s->w_mask = s->w_size - 1; - - s->hash_bits = memLevel + 7; - s->hash_size = 1 << s->hash_bits; - s->hash_mask = s->hash_size - 1; - s->hash_shift = ((s->hash_bits+MIN_MATCH-1)/MIN_MATCH); - - s->window = (Bytef *) ZALLOC(strm, s->w_size, 2*sizeof(Byte)); - s->prev = (Posf *) ZALLOC(strm, s->w_size, sizeof(Pos)); - s->head = (Posf *) ZALLOC(strm, s->hash_size, sizeof(Pos)); - - s->high_water = 0; /* nothing written to s->window yet */ - - s->lit_bufsize = 1 << (memLevel + 6); /* 16K elements by default */ - - overlay = (ushf *) ZALLOC(strm, s->lit_bufsize, sizeof(ush)+2); - s->pending_buf = (uchf *) overlay; - s->pending_buf_size = (ulg)s->lit_bufsize * (sizeof(ush)+2L); - - if (s->window == Z_NULL || s->prev == Z_NULL || s->head == Z_NULL || - s->pending_buf == Z_NULL) { - s->status = FINISH_STATE; - strm->msg = (char*)ERR_MSG(Z_MEM_ERROR); - deflateEnd (strm); - return Z_MEM_ERROR; - } - s->d_buf = overlay + s->lit_bufsize/sizeof(ush); - s->l_buf = s->pending_buf + (1+sizeof(ush))*s->lit_bufsize; - - s->level = level; - s->strategy = strategy; - s->method = (Byte)method; - - return deflateReset(strm); -} - -/* ========================================================================= */ -int ZEXPORT deflateSetDictionary (strm, dictionary, dictLength) - z_streamp strm; - const Bytef *dictionary; - uInt dictLength; -{ - deflate_state *s; - uInt str, n; - int wrap; - unsigned avail; - unsigned char *next; - - if (strm == Z_NULL || strm->state == Z_NULL || dictionary == Z_NULL) - return Z_STREAM_ERROR; - s = strm->state; - wrap = s->wrap; - if (wrap == 2 || (wrap == 1 && s->status != INIT_STATE) || s->lookahead) - return Z_STREAM_ERROR; - - /* when using zlib wrappers, compute Adler-32 for provided dictionary */ - if (wrap == 1) - strm->adler = adler32(strm->adler, dictionary, dictLength); - s->wrap = 0; /* avoid computing Adler-32 in read_buf */ - - /* if dictionary would fill window, just replace the history */ - if (dictLength >= s->w_size) { - if (wrap == 0) { /* already empty otherwise */ - CLEAR_HASH(s); - s->strstart = 0; - s->block_start = 0L; - s->insert = 0; - } - dictionary += dictLength - s->w_size; /* use the tail */ - dictLength = s->w_size; - } - - /* insert dictionary into window and hash */ - avail = strm->avail_in; - next = strm->next_in; - strm->avail_in = dictLength; - strm->next_in = (Bytef *)dictionary; - fill_window(s); - while (s->lookahead >= MIN_MATCH) { - str = s->strstart; - n = s->lookahead - (MIN_MATCH-1); - do { - UPDATE_HASH(s, s->ins_h, s->window[str + MIN_MATCH-1]); -#ifndef FASTEST - s->prev[str & s->w_mask] = s->head[s->ins_h]; -#endif - s->head[s->ins_h] = (Pos)str; - str++; - } while (--n); - s->strstart = str; - s->lookahead = MIN_MATCH-1; - fill_window(s); - } - s->strstart += s->lookahead; - s->block_start = (long)s->strstart; - s->insert = s->lookahead; - s->lookahead = 0; - s->match_length = s->prev_length = MIN_MATCH-1; - s->match_available = 0; - strm->next_in = next; - strm->avail_in = avail; - s->wrap = wrap; - return Z_OK; -} - -/* ========================================================================= */ -int ZEXPORT deflateResetKeep (strm) - z_streamp strm; -{ - deflate_state *s; - - if (strm == Z_NULL || strm->state == Z_NULL || - strm->zalloc == (alloc_func)0 || strm->zfree == (free_func)0) { - return Z_STREAM_ERROR; - } - - strm->total_in = strm->total_out = 0; - strm->msg = Z_NULL; /* use zfree if we ever allocate msg dynamically */ - strm->data_type = Z_UNKNOWN; - - s = (deflate_state *)strm->state; - s->pending = 0; - s->pending_out = s->pending_buf; - - if (s->wrap < 0) { - s->wrap = -s->wrap; /* was made negative by deflate(..., Z_FINISH); */ - } - s->status = s->wrap ? INIT_STATE : BUSY_STATE; - strm->adler = -#ifdef GZIP - s->wrap == 2 ? crc32(0L, Z_NULL, 0) : -#endif - adler32(0L, Z_NULL, 0); - s->last_flush = Z_NO_FLUSH; - - _tr_init(s); - - return Z_OK; -} - -/* ========================================================================= */ -int ZEXPORT deflateReset (strm) - z_streamp strm; -{ - int ret; - - ret = deflateResetKeep(strm); - if (ret == Z_OK) - lm_init(strm->state); - return ret; -} - -/* ========================================================================= */ -int ZEXPORT deflateSetHeader (strm, head) - z_streamp strm; - gz_headerp head; -{ - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - if (strm->state->wrap != 2) return Z_STREAM_ERROR; - strm->state->gzhead = head; - return Z_OK; -} - -/* ========================================================================= */ -int ZEXPORT deflatePending (strm, pending, bits) - unsigned *pending; - int *bits; - z_streamp strm; -{ - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - if (pending != Z_NULL) - *pending = strm->state->pending; - if (bits != Z_NULL) - *bits = strm->state->bi_valid; - return Z_OK; -} - -/* ========================================================================= */ -int ZEXPORT deflatePrime (strm, bits, value) - z_streamp strm; - int bits; - int value; -{ - deflate_state *s; - int put; - - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - s = strm->state; - if ((Bytef *)(s->d_buf) < s->pending_out + ((Buf_size + 7) >> 3)) - return Z_BUF_ERROR; - do { - put = Buf_size - s->bi_valid; - if (put > bits) - put = bits; - s->bi_buf |= (ush)((value & ((1 << put) - 1)) << s->bi_valid); - s->bi_valid += put; - _tr_flush_bits(s); - value >>= put; - bits -= put; - } while (bits); - return Z_OK; -} - -/* ========================================================================= */ -int ZEXPORT deflateParams(strm, level, strategy) - z_streamp strm; - int level; - int strategy; -{ - deflate_state *s; - compress_func func; - int err = Z_OK; - - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - s = strm->state; - -#ifdef FASTEST - if (level != 0) level = 1; -#else - if (level == Z_DEFAULT_COMPRESSION) level = 6; -#endif - if (level < 0 || level > 9 || strategy < 0 || strategy > Z_FIXED) { - return Z_STREAM_ERROR; - } - func = configuration_table[s->level].func; - - if ((strategy != s->strategy || func != configuration_table[level].func) && - strm->total_in != 0) { - /* Flush the last buffer: */ - err = deflate(strm, Z_BLOCK); - } - if (s->level != level) { - s->level = level; - s->max_lazy_match = configuration_table[level].max_lazy; - s->good_match = configuration_table[level].good_length; - s->nice_match = configuration_table[level].nice_length; - s->max_chain_length = configuration_table[level].max_chain; - } - s->strategy = strategy; - return err; -} - -/* ========================================================================= */ -int ZEXPORT deflateTune(strm, good_length, max_lazy, nice_length, max_chain) - z_streamp strm; - int good_length; - int max_lazy; - int nice_length; - int max_chain; -{ - deflate_state *s; - - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - s = strm->state; - s->good_match = good_length; - s->max_lazy_match = max_lazy; - s->nice_match = nice_length; - s->max_chain_length = max_chain; - return Z_OK; -} - -/* ========================================================================= - * For the default windowBits of 15 and memLevel of 8, this function returns - * a close to exact, as well as small, upper bound on the compressed size. - * They are coded as constants here for a reason--if the #define's are - * changed, then this function needs to be changed as well. The return - * value for 15 and 8 only works for those exact settings. - * - * For any setting other than those defaults for windowBits and memLevel, - * the value returned is a conservative worst case for the maximum expansion - * resulting from using fixed blocks instead of stored blocks, which deflate - * can emit on compressed data for some combinations of the parameters. - * - * This function could be more sophisticated to provide closer upper bounds for - * every combination of windowBits and memLevel. But even the conservative - * upper bound of about 14% expansion does not seem onerous for output buffer - * allocation. - */ -uLong ZEXPORT deflateBound(strm, sourceLen) - z_streamp strm; - uLong sourceLen; -{ - deflate_state *s; - uLong complen, wraplen; - Bytef *str; - - /* conservative upper bound for compressed data */ - complen = sourceLen + - ((sourceLen + 7) >> 3) + ((sourceLen + 63) >> 6) + 5; - - /* if can't get parameters, return conservative bound plus zlib wrapper */ - if (strm == Z_NULL || strm->state == Z_NULL) - return complen + 6; - - /* compute wrapper length */ - s = strm->state; - switch (s->wrap) { - case 0: /* raw deflate */ - wraplen = 0; - break; - case 1: /* zlib wrapper */ - wraplen = 6 + (s->strstart ? 4 : 0); - break; - case 2: /* gzip wrapper */ - wraplen = 18; - if (s->gzhead != Z_NULL) { /* user-supplied gzip header */ - if (s->gzhead->extra != Z_NULL) - wraplen += 2 + s->gzhead->extra_len; - str = s->gzhead->name; - if (str != Z_NULL) - do { - wraplen++; - } while (*str++); - str = s->gzhead->comment; - if (str != Z_NULL) - do { - wraplen++; - } while (*str++); - if (s->gzhead->hcrc) - wraplen += 2; - } - break; - default: /* for compiler happiness */ - wraplen = 6; - } - - /* if not default parameters, return conservative bound */ - if (s->w_bits != 15 || s->hash_bits != 8 + 7) - return complen + wraplen; - - /* default settings: return tight bound for that case */ - return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) + - (sourceLen >> 25) + 13 - 6 + wraplen; -} - -/* ========================================================================= - * Put a short in the pending buffer. The 16-bit value is put in MSB order. - * IN assertion: the stream state is correct and there is enough room in - * pending_buf. - */ -local void putShortMSB (s, b) - deflate_state *s; - uInt b; -{ - put_byte(s, (Byte)(b >> 8)); - put_byte(s, (Byte)(b & 0xff)); -} - -/* ========================================================================= - * Flush as much pending output as possible. All deflate() output goes - * through this function so some applications may wish to modify it - * to avoid allocating a large strm->next_out buffer and copying into it. - * (See also read_buf()). - */ -local void flush_pending(strm) - z_streamp strm; -{ - unsigned len; - deflate_state *s = strm->state; - - _tr_flush_bits(s); - len = s->pending; - if (len > strm->avail_out) len = strm->avail_out; - if (len == 0) return; - - zmemcpy(strm->next_out, s->pending_out, len); - strm->next_out += len; - s->pending_out += len; - strm->total_out += len; - strm->avail_out -= len; - s->pending -= len; - if (s->pending == 0) { - s->pending_out = s->pending_buf; - } -} - -/* ========================================================================= */ -int ZEXPORT deflate (strm, flush) - z_streamp strm; - int flush; -{ - int old_flush; /* value of flush param for previous deflate call */ - deflate_state *s; - - if (strm == Z_NULL || strm->state == Z_NULL || - flush > Z_BLOCK || flush < 0) { - return Z_STREAM_ERROR; - } - s = strm->state; - - if (strm->next_out == Z_NULL || - (strm->next_in == Z_NULL && strm->avail_in != 0) || - (s->status == FINISH_STATE && flush != Z_FINISH)) { - ERR_RETURN(strm, Z_STREAM_ERROR); - } - if (strm->avail_out == 0) ERR_RETURN(strm, Z_BUF_ERROR); - - s->strm = strm; /* just in case */ - old_flush = s->last_flush; - s->last_flush = flush; - - /* Write the header */ - if (s->status == INIT_STATE) { -#ifdef GZIP - if (s->wrap == 2) { - strm->adler = crc32(0L, Z_NULL, 0); - put_byte(s, 31); - put_byte(s, 139); - put_byte(s, 8); - if (s->gzhead == Z_NULL) { - put_byte(s, 0); - put_byte(s, 0); - put_byte(s, 0); - put_byte(s, 0); - put_byte(s, 0); - put_byte(s, s->level == 9 ? 2 : - (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ? - 4 : 0)); - put_byte(s, OS_CODE); - s->status = BUSY_STATE; - } - else { - put_byte(s, (s->gzhead->text ? 1 : 0) + - (s->gzhead->hcrc ? 2 : 0) + - (s->gzhead->extra == Z_NULL ? 0 : 4) + - (s->gzhead->name == Z_NULL ? 0 : 8) + - (s->gzhead->comment == Z_NULL ? 0 : 16) - ); - put_byte(s, (Byte)(s->gzhead->time & 0xff)); - put_byte(s, (Byte)((s->gzhead->time >> 8) & 0xff)); - put_byte(s, (Byte)((s->gzhead->time >> 16) & 0xff)); - put_byte(s, (Byte)((s->gzhead->time >> 24) & 0xff)); - put_byte(s, s->level == 9 ? 2 : - (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ? - 4 : 0)); - put_byte(s, s->gzhead->os & 0xff); - if (s->gzhead->extra != Z_NULL) { - put_byte(s, s->gzhead->extra_len & 0xff); - put_byte(s, (s->gzhead->extra_len >> 8) & 0xff); - } - if (s->gzhead->hcrc) - strm->adler = crc32(strm->adler, s->pending_buf, - s->pending); - s->gzindex = 0; - s->status = EXTRA_STATE; - } - } - else -#endif - { - uInt header = (Z_DEFLATED + ((s->w_bits-8)<<4)) << 8; - uInt level_flags; - - if (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2) - level_flags = 0; - else if (s->level < 6) - level_flags = 1; - else if (s->level == 6) - level_flags = 2; - else - level_flags = 3; - header |= (level_flags << 6); - if (s->strstart != 0) header |= PRESET_DICT; - header += 31 - (header % 31); - - s->status = BUSY_STATE; - putShortMSB(s, header); - - /* Save the adler32 of the preset dictionary: */ - if (s->strstart != 0) { - putShortMSB(s, (uInt)(strm->adler >> 16)); - putShortMSB(s, (uInt)(strm->adler & 0xffff)); - } - strm->adler = adler32(0L, Z_NULL, 0); - } - } -#ifdef GZIP - if (s->status == EXTRA_STATE) { - if (s->gzhead->extra != Z_NULL) { - uInt beg = s->pending; /* start of bytes to update crc */ - - while (s->gzindex < (s->gzhead->extra_len & 0xffff)) { - if (s->pending == s->pending_buf_size) { - if (s->gzhead->hcrc && s->pending > beg) - strm->adler = crc32(strm->adler, s->pending_buf + beg, - s->pending - beg); - flush_pending(strm); - beg = s->pending; - if (s->pending == s->pending_buf_size) - break; - } - put_byte(s, s->gzhead->extra[s->gzindex]); - s->gzindex++; - } - if (s->gzhead->hcrc && s->pending > beg) - strm->adler = crc32(strm->adler, s->pending_buf + beg, - s->pending - beg); - if (s->gzindex == s->gzhead->extra_len) { - s->gzindex = 0; - s->status = NAME_STATE; - } - } - else - s->status = NAME_STATE; - } - if (s->status == NAME_STATE) { - if (s->gzhead->name != Z_NULL) { - uInt beg = s->pending; /* start of bytes to update crc */ - int val; - - do { - if (s->pending == s->pending_buf_size) { - if (s->gzhead->hcrc && s->pending > beg) - strm->adler = crc32(strm->adler, s->pending_buf + beg, - s->pending - beg); - flush_pending(strm); - beg = s->pending; - if (s->pending == s->pending_buf_size) { - val = 1; - break; - } - } - val = s->gzhead->name[s->gzindex++]; - put_byte(s, val); - } while (val != 0); - if (s->gzhead->hcrc && s->pending > beg) - strm->adler = crc32(strm->adler, s->pending_buf + beg, - s->pending - beg); - if (val == 0) { - s->gzindex = 0; - s->status = COMMENT_STATE; - } - } - else - s->status = COMMENT_STATE; - } - if (s->status == COMMENT_STATE) { - if (s->gzhead->comment != Z_NULL) { - uInt beg = s->pending; /* start of bytes to update crc */ - int val; - - do { - if (s->pending == s->pending_buf_size) { - if (s->gzhead->hcrc && s->pending > beg) - strm->adler = crc32(strm->adler, s->pending_buf + beg, - s->pending - beg); - flush_pending(strm); - beg = s->pending; - if (s->pending == s->pending_buf_size) { - val = 1; - break; - } - } - val = s->gzhead->comment[s->gzindex++]; - put_byte(s, val); - } while (val != 0); - if (s->gzhead->hcrc && s->pending > beg) - strm->adler = crc32(strm->adler, s->pending_buf + beg, - s->pending - beg); - if (val == 0) - s->status = HCRC_STATE; - } - else - s->status = HCRC_STATE; - } - if (s->status == HCRC_STATE) { - if (s->gzhead->hcrc) { - if (s->pending + 2 > s->pending_buf_size) - flush_pending(strm); - if (s->pending + 2 <= s->pending_buf_size) { - put_byte(s, (Byte)(strm->adler & 0xff)); - put_byte(s, (Byte)((strm->adler >> 8) & 0xff)); - strm->adler = crc32(0L, Z_NULL, 0); - s->status = BUSY_STATE; - } - } - else - s->status = BUSY_STATE; - } -#endif - - /* Flush as much pending output as possible */ - if (s->pending != 0) { - flush_pending(strm); - if (strm->avail_out == 0) { - /* Since avail_out is 0, deflate will be called again with - * more output space, but possibly with both pending and - * avail_in equal to zero. There won't be anything to do, - * but this is not an error situation so make sure we - * return OK instead of BUF_ERROR at next call of deflate: - */ - s->last_flush = -1; - return Z_OK; - } - - /* Make sure there is something to do and avoid duplicate consecutive - * flushes. For repeated and useless calls with Z_FINISH, we keep - * returning Z_STREAM_END instead of Z_BUF_ERROR. - */ - } else if (strm->avail_in == 0 && RANK(flush) <= RANK(old_flush) && - flush != Z_FINISH) { - ERR_RETURN(strm, Z_BUF_ERROR); - } - - /* User must not provide more input after the first FINISH: */ - if (s->status == FINISH_STATE && strm->avail_in != 0) { - ERR_RETURN(strm, Z_BUF_ERROR); - } - - /* Start a new block or continue the current one. - */ - if (strm->avail_in != 0 || s->lookahead != 0 || - (flush != Z_NO_FLUSH && s->status != FINISH_STATE)) { - block_state bstate; - - bstate = s->strategy == Z_HUFFMAN_ONLY ? deflate_huff(s, flush) : - (s->strategy == Z_RLE ? deflate_rle(s, flush) : - (*(configuration_table[s->level].func))(s, flush)); - - if (bstate == finish_started || bstate == finish_done) { - s->status = FINISH_STATE; - } - if (bstate == need_more || bstate == finish_started) { - if (strm->avail_out == 0) { - s->last_flush = -1; /* avoid BUF_ERROR next call, see above */ - } - return Z_OK; - /* If flush != Z_NO_FLUSH && avail_out == 0, the next call - * of deflate should use the same flush parameter to make sure - * that the flush is complete. So we don't have to output an - * empty block here, this will be done at next call. This also - * ensures that for a very small output buffer, we emit at most - * one empty block. - */ - } - if (bstate == block_done) { - if (flush == Z_PARTIAL_FLUSH) { - _tr_align(s); - } else if (flush != Z_BLOCK) { /* FULL_FLUSH or SYNC_FLUSH */ - _tr_stored_block(s, (char*)0, 0L, 0); - /* For a full flush, this empty block will be recognized - * as a special marker by inflate_sync(). - */ - if (flush == Z_FULL_FLUSH) { - CLEAR_HASH(s); /* forget history */ - if (s->lookahead == 0) { - s->strstart = 0; - s->block_start = 0L; - s->insert = 0; - } - } - } - flush_pending(strm); - if (strm->avail_out == 0) { - s->last_flush = -1; /* avoid BUF_ERROR at next call, see above */ - return Z_OK; - } - } - } - Assert(strm->avail_out > 0, "bug2"); - - if (flush != Z_FINISH) return Z_OK; - if (s->wrap <= 0) return Z_STREAM_END; - - /* Write the trailer */ -#ifdef GZIP - if (s->wrap == 2) { - put_byte(s, (Byte)(strm->adler & 0xff)); - put_byte(s, (Byte)((strm->adler >> 8) & 0xff)); - put_byte(s, (Byte)((strm->adler >> 16) & 0xff)); - put_byte(s, (Byte)((strm->adler >> 24) & 0xff)); - put_byte(s, (Byte)(strm->total_in & 0xff)); - put_byte(s, (Byte)((strm->total_in >> 8) & 0xff)); - put_byte(s, (Byte)((strm->total_in >> 16) & 0xff)); - put_byte(s, (Byte)((strm->total_in >> 24) & 0xff)); - } - else -#endif - { - putShortMSB(s, (uInt)(strm->adler >> 16)); - putShortMSB(s, (uInt)(strm->adler & 0xffff)); - } - flush_pending(strm); - /* If avail_out is zero, the application will call deflate again - * to flush the rest. - */ - if (s->wrap > 0) s->wrap = -s->wrap; /* write the trailer only once! */ - return s->pending != 0 ? Z_OK : Z_STREAM_END; -} - -/* ========================================================================= */ -int ZEXPORT deflateEnd (strm) - z_streamp strm; -{ - int status; - - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - - status = strm->state->status; - if (status != INIT_STATE && - status != EXTRA_STATE && - status != NAME_STATE && - status != COMMENT_STATE && - status != HCRC_STATE && - status != BUSY_STATE && - status != FINISH_STATE) { - return Z_STREAM_ERROR; - } - - /* Deallocate in reverse order of allocations: */ - TRY_FREE(strm, strm->state->pending_buf); - TRY_FREE(strm, strm->state->head); - TRY_FREE(strm, strm->state->prev); - TRY_FREE(strm, strm->state->window); - - ZFREE(strm, strm->state); - strm->state = Z_NULL; - - return status == BUSY_STATE ? Z_DATA_ERROR : Z_OK; -} - -/* ========================================================================= - * Copy the source state to the destination state. - * To simplify the source, this is not supported for 16-bit MSDOS (which - * doesn't have enough memory anyway to duplicate compression states). - */ -int ZEXPORT deflateCopy (dest, source) - z_streamp dest; - z_streamp source; -{ -#ifdef MAXSEG_64K - return Z_STREAM_ERROR; -#else - deflate_state *ds; - deflate_state *ss; - ushf *overlay; - - - if (source == Z_NULL || dest == Z_NULL || source->state == Z_NULL) { - return Z_STREAM_ERROR; - } - - ss = source->state; - - zmemcpy((voidpf)dest, (voidpf)source, sizeof(z_stream)); - - ds = (deflate_state *) ZALLOC(dest, 1, sizeof(deflate_state)); - if (ds == Z_NULL) return Z_MEM_ERROR; - dest->state = (struct internal_state FAR *) ds; - zmemcpy((voidpf)ds, (voidpf)ss, sizeof(deflate_state)); - ds->strm = dest; - - ds->window = (Bytef *) ZALLOC(dest, ds->w_size, 2*sizeof(Byte)); - ds->prev = (Posf *) ZALLOC(dest, ds->w_size, sizeof(Pos)); - ds->head = (Posf *) ZALLOC(dest, ds->hash_size, sizeof(Pos)); - overlay = (ushf *) ZALLOC(dest, ds->lit_bufsize, sizeof(ush)+2); - ds->pending_buf = (uchf *) overlay; - - if (ds->window == Z_NULL || ds->prev == Z_NULL || ds->head == Z_NULL || - ds->pending_buf == Z_NULL) { - deflateEnd (dest); - return Z_MEM_ERROR; - } - /* following zmemcpy do not work for 16-bit MSDOS */ - zmemcpy(ds->window, ss->window, ds->w_size * 2 * sizeof(Byte)); - zmemcpy((voidpf)ds->prev, (voidpf)ss->prev, ds->w_size * sizeof(Pos)); - zmemcpy((voidpf)ds->head, (voidpf)ss->head, ds->hash_size * sizeof(Pos)); - zmemcpy(ds->pending_buf, ss->pending_buf, (uInt)ds->pending_buf_size); - - ds->pending_out = ds->pending_buf + (ss->pending_out - ss->pending_buf); - ds->d_buf = overlay + ds->lit_bufsize/sizeof(ush); - ds->l_buf = ds->pending_buf + (1+sizeof(ush))*ds->lit_bufsize; - - ds->l_desc.dyn_tree = ds->dyn_ltree; - ds->d_desc.dyn_tree = ds->dyn_dtree; - ds->bl_desc.dyn_tree = ds->bl_tree; - - return Z_OK; -#endif /* MAXSEG_64K */ -} - -/* =========================================================================== - * Read a new buffer from the current input stream, update the adler32 - * and total number of bytes read. All deflate() input goes through - * this function so some applications may wish to modify it to avoid - * allocating a large strm->next_in buffer and copying from it. - * (See also flush_pending()). - */ -local int read_buf(strm, buf, size) - z_streamp strm; - Bytef *buf; - unsigned size; -{ - unsigned len = strm->avail_in; - - if (len > size) len = size; - if (len == 0) return 0; - - strm->avail_in -= len; - - zmemcpy(buf, strm->next_in, len); - if (strm->state->wrap == 1) { - strm->adler = adler32(strm->adler, buf, len); - } -#ifdef GZIP - else if (strm->state->wrap == 2) { - strm->adler = crc32(strm->adler, buf, len); - } -#endif - strm->next_in += len; - strm->total_in += len; - - return (int)len; -} - -/* =========================================================================== - * Initialize the "longest match" routines for a new zlib stream - */ -local void lm_init (s) - deflate_state *s; -{ - s->window_size = (ulg)2L*s->w_size; - - CLEAR_HASH(s); - - /* Set the default configuration parameters: - */ - s->max_lazy_match = configuration_table[s->level].max_lazy; - s->good_match = configuration_table[s->level].good_length; - s->nice_match = configuration_table[s->level].nice_length; - s->max_chain_length = configuration_table[s->level].max_chain; - - s->strstart = 0; - s->block_start = 0L; - s->lookahead = 0; - s->insert = 0; - s->match_length = s->prev_length = MIN_MATCH-1; - s->match_available = 0; - s->ins_h = 0; -#ifndef FASTEST -#ifdef ASMV - match_init(); /* initialize the asm code */ -#endif -#endif -} - -#ifndef FASTEST -/* =========================================================================== - * Set match_start to the longest match starting at the given string and - * return its length. Matches shorter or equal to prev_length are discarded, - * in which case the result is equal to prev_length and match_start is - * garbage. - * IN assertions: cur_match is the head of the hash chain for the current - * string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1 - * OUT assertion: the match length is not greater than s->lookahead. - */ -#ifndef ASMV -/* For 80x86 and 680x0, an optimized version will be provided in match.asm or - * match.S. The code will be functionally equivalent. - */ -local uInt longest_match(s, cur_match) - deflate_state *s; - IPos cur_match; /* current match */ -{ - unsigned chain_length = s->max_chain_length;/* max hash chain length */ - register Bytef *scan = s->window + s->strstart; /* current string */ - register Bytef *match; /* matched string */ - register int len; /* length of current match */ - int best_len = s->prev_length; /* best match length so far */ - int nice_match = s->nice_match; /* stop if match long enough */ - IPos limit = s->strstart > (IPos)MAX_DIST(s) ? - s->strstart - (IPos)MAX_DIST(s) : NIL; - /* Stop when cur_match becomes <= limit. To simplify the code, - * we prevent matches with the string of window index 0. - */ - Posf *prev = s->prev; - uInt wmask = s->w_mask; - -#ifdef UNALIGNED_OK - /* Compare two bytes at a time. Note: this is not always beneficial. - * Try with and without -DUNALIGNED_OK to check. - */ - register Bytef *strend = s->window + s->strstart + MAX_MATCH - 1; - register ush scan_start = *(ushf*)scan; - register ush scan_end = *(ushf*)(scan+best_len-1); -#else - register Bytef *strend = s->window + s->strstart + MAX_MATCH; - register Byte scan_end1 = scan[best_len-1]; - register Byte scan_end = scan[best_len]; -#endif - - /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16. - * It is easy to get rid of this optimization if necessary. - */ - Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever"); - - /* Do not waste too much time if we already have a good match: */ - if (s->prev_length >= s->good_match) { - chain_length >>= 2; - } - /* Do not look for matches beyond the end of the input. This is necessary - * to make deflate deterministic. - */ - if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead; - - Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead"); - - do { - Assert(cur_match < s->strstart, "no future"); - match = s->window + cur_match; - - /* Skip to next match if the match length cannot increase - * or if the match length is less than 2. Note that the checks below - * for insufficient lookahead only occur occasionally for performance - * reasons. Therefore uninitialized memory will be accessed, and - * conditional jumps will be made that depend on those values. - * However the length of the match is limited to the lookahead, so - * the output of deflate is not affected by the uninitialized values. - */ -#if (defined(UNALIGNED_OK) && MAX_MATCH == 258) - /* This code assumes sizeof(unsigned short) == 2. Do not use - * UNALIGNED_OK if your compiler uses a different size. - */ - if (*(ushf*)(match+best_len-1) != scan_end || - *(ushf*)match != scan_start) continue; - - /* It is not necessary to compare scan[2] and match[2] since they are - * always equal when the other bytes match, given that the hash keys - * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at - * strstart+3, +5, ... up to strstart+257. We check for insufficient - * lookahead only every 4th comparison; the 128th check will be made - * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is - * necessary to put more guard bytes at the end of the window, or - * to check more often for insufficient lookahead. - */ - Assert(scan[2] == match[2], "scan[2]?"); - scan++, match++; - do { - } while (*(ushf*)(scan+=2) == *(ushf*)(match+=2) && - *(ushf*)(scan+=2) == *(ushf*)(match+=2) && - *(ushf*)(scan+=2) == *(ushf*)(match+=2) && - *(ushf*)(scan+=2) == *(ushf*)(match+=2) && - scan < strend); - /* The funny "do {}" generates better code on most compilers */ - - /* Here, scan <= window+strstart+257 */ - Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan"); - if (*scan == *match) scan++; - - len = (MAX_MATCH - 1) - (int)(strend-scan); - scan = strend - (MAX_MATCH-1); - -#else /* UNALIGNED_OK */ - - if (match[best_len] != scan_end || - match[best_len-1] != scan_end1 || - *match != *scan || - *++match != scan[1]) continue; - - /* The check at best_len-1 can be removed because it will be made - * again later. (This heuristic is not always a win.) - * It is not necessary to compare scan[2] and match[2] since they - * are always equal when the other bytes match, given that - * the hash keys are equal and that HASH_BITS >= 8. - */ - scan += 2, match++; - Assert(*scan == *match, "match[2]?"); - - /* We check for insufficient lookahead only every 8th comparison; - * the 256th check will be made at strstart+258. - */ - do { - } while (*++scan == *++match && *++scan == *++match && - *++scan == *++match && *++scan == *++match && - *++scan == *++match && *++scan == *++match && - *++scan == *++match && *++scan == *++match && - scan < strend); - - Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan"); - - len = MAX_MATCH - (int)(strend - scan); - scan = strend - MAX_MATCH; - -#endif /* UNALIGNED_OK */ - - if (len > best_len) { - s->match_start = cur_match; - best_len = len; - if (len >= nice_match) break; -#ifdef UNALIGNED_OK - scan_end = *(ushf*)(scan+best_len-1); -#else - scan_end1 = scan[best_len-1]; - scan_end = scan[best_len]; -#endif - } - } while ((cur_match = prev[cur_match & wmask]) > limit - && --chain_length != 0); - - if ((uInt)best_len <= s->lookahead) return (uInt)best_len; - return s->lookahead; -} -#endif /* ASMV */ - -#else /* FASTEST */ - -/* --------------------------------------------------------------------------- - * Optimized version for FASTEST only - */ -local uInt longest_match(s, cur_match) - deflate_state *s; - IPos cur_match; /* current match */ -{ - register Bytef *scan = s->window + s->strstart; /* current string */ - register Bytef *match; /* matched string */ - register int len; /* length of current match */ - register Bytef *strend = s->window + s->strstart + MAX_MATCH; - - /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16. - * It is easy to get rid of this optimization if necessary. - */ - Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever"); - - Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead"); - - Assert(cur_match < s->strstart, "no future"); - - match = s->window + cur_match; - - /* Return failure if the match length is less than 2: - */ - if (match[0] != scan[0] || match[1] != scan[1]) return MIN_MATCH-1; - - /* The check at best_len-1 can be removed because it will be made - * again later. (This heuristic is not always a win.) - * It is not necessary to compare scan[2] and match[2] since they - * are always equal when the other bytes match, given that - * the hash keys are equal and that HASH_BITS >= 8. - */ - scan += 2, match += 2; - Assert(*scan == *match, "match[2]?"); - - /* We check for insufficient lookahead only every 8th comparison; - * the 256th check will be made at strstart+258. - */ - do { - } while (*++scan == *++match && *++scan == *++match && - *++scan == *++match && *++scan == *++match && - *++scan == *++match && *++scan == *++match && - *++scan == *++match && *++scan == *++match && - scan < strend); - - Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan"); - - len = MAX_MATCH - (int)(strend - scan); - - if (len < MIN_MATCH) return MIN_MATCH - 1; - - s->match_start = cur_match; - return (uInt)len <= s->lookahead ? (uInt)len : s->lookahead; -} - -#endif /* FASTEST */ - -#ifdef DEBUG -/* =========================================================================== - * Check that the match at match_start is indeed a match. - */ -local void check_match(s, start, match, length) - deflate_state *s; - IPos start, match; - int length; -{ - /* check that the match is indeed a match */ - if (zmemcmp(s->window + match, - s->window + start, length) != EQUAL) { - fprintf(stderr, " start %u, match %u, length %d\n", - start, match, length); - do { - fprintf(stderr, "%c%c", s->window[match++], s->window[start++]); - } while (--length != 0); - z_error("invalid match"); - } - if (z_verbose > 1) { - fprintf(stderr,"\\[%d,%d]", start-match, length); - do { putc(s->window[start++], stderr); } while (--length != 0); - } -} -#else -# define check_match(s, start, match, length) -#endif /* DEBUG */ - -/* =========================================================================== - * Fill the window when the lookahead becomes insufficient. - * Updates strstart and lookahead. - * - * IN assertion: lookahead < MIN_LOOKAHEAD - * OUT assertions: strstart <= window_size-MIN_LOOKAHEAD - * At least one byte has been read, or avail_in == 0; reads are - * performed for at least two bytes (required for the zip translate_eol - * option -- not supported here). - */ -local void fill_window(s) - deflate_state *s; -{ - register unsigned n, m; - register Posf *p; - unsigned more; /* Amount of free space at the end of the window. */ - uInt wsize = s->w_size; - - Assert(s->lookahead < MIN_LOOKAHEAD, "already enough lookahead"); - - do { - more = (unsigned)(s->window_size -(ulg)s->lookahead -(ulg)s->strstart); - - /* Deal with !@#$% 64K limit: */ - if (sizeof(int) <= 2) { - if (more == 0 && s->strstart == 0 && s->lookahead == 0) { - more = wsize; - - } else if (more == (unsigned)(-1)) { - /* Very unlikely, but possible on 16 bit machine if - * strstart == 0 && lookahead == 1 (input done a byte at time) - */ - more--; - } - } - - /* If the window is almost full and there is insufficient lookahead, - * move the upper half to the lower one to make room in the upper half. - */ - if (s->strstart >= wsize+MAX_DIST(s)) { - - zmemcpy(s->window, s->window+wsize, (unsigned)wsize); - s->match_start -= wsize; - s->strstart -= wsize; /* we now have strstart >= MAX_DIST */ - s->block_start -= (long) wsize; - - /* Slide the hash table (could be avoided with 32 bit values - at the expense of memory usage). We slide even when level == 0 - to keep the hash table consistent if we switch back to level > 0 - later. (Using level 0 permanently is not an optimal usage of - zlib, so we don't care about this pathological case.) - */ - n = s->hash_size; - p = &s->head[n]; - do { - m = *--p; - *p = (Pos)(m >= wsize ? m-wsize : NIL); - } while (--n); - - n = wsize; -#ifndef FASTEST - p = &s->prev[n]; - do { - m = *--p; - *p = (Pos)(m >= wsize ? m-wsize : NIL); - /* If n is not on any hash chain, prev[n] is garbage but - * its value will never be used. - */ - } while (--n); -#endif - more += wsize; - } - if (s->strm->avail_in == 0) break; - - /* If there was no sliding: - * strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 && - * more == window_size - lookahead - strstart - * => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1) - * => more >= window_size - 2*WSIZE + 2 - * In the BIG_MEM or MMAP case (not yet supported), - * window_size == input_size + MIN_LOOKAHEAD && - * strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD. - * Otherwise, window_size == 2*WSIZE so more >= 2. - * If there was sliding, more >= WSIZE. So in all cases, more >= 2. - */ - Assert(more >= 2, "more < 2"); - - n = read_buf(s->strm, s->window + s->strstart + s->lookahead, more); - s->lookahead += n; - - /* Initialize the hash value now that we have some input: */ - if (s->lookahead + s->insert >= MIN_MATCH) { - uInt str = s->strstart - s->insert; - s->ins_h = s->window[str]; - UPDATE_HASH(s, s->ins_h, s->window[str + 1]); -#if MIN_MATCH != 3 - Call UPDATE_HASH() MIN_MATCH-3 more times -#endif - while (s->insert) { - UPDATE_HASH(s, s->ins_h, s->window[str + MIN_MATCH-1]); -#ifndef FASTEST - s->prev[str & s->w_mask] = s->head[s->ins_h]; -#endif - s->head[s->ins_h] = (Pos)str; - str++; - s->insert--; - if (s->lookahead + s->insert < MIN_MATCH) - break; - } - } - /* If the whole input has less than MIN_MATCH bytes, ins_h is garbage, - * but this is not important since only literal bytes will be emitted. - */ - - } while (s->lookahead < MIN_LOOKAHEAD && s->strm->avail_in != 0); - - /* If the WIN_INIT bytes after the end of the current data have never been - * written, then zero those bytes in order to avoid memory check reports of - * the use of uninitialized (or uninitialised as Julian writes) bytes by - * the longest match routines. Update the high water mark for the next - * time through here. WIN_INIT is set to MAX_MATCH since the longest match - * routines allow scanning to strstart + MAX_MATCH, ignoring lookahead. - */ - if (s->high_water < s->window_size) { - ulg curr = s->strstart + (ulg)(s->lookahead); - ulg init; - - if (s->high_water < curr) { - /* Previous high water mark below current data -- zero WIN_INIT - * bytes or up to end of window, whichever is less. - */ - init = s->window_size - curr; - if (init > WIN_INIT) - init = WIN_INIT; - zmemzero(s->window + curr, (unsigned)init); - s->high_water = curr + init; - } - else if (s->high_water < (ulg)curr + WIN_INIT) { - /* High water mark at or above current data, but below current data - * plus WIN_INIT -- zero out to current data plus WIN_INIT, or up - * to end of window, whichever is less. - */ - init = (ulg)curr + WIN_INIT - s->high_water; - if (init > s->window_size - s->high_water) - init = s->window_size - s->high_water; - zmemzero(s->window + s->high_water, (unsigned)init); - s->high_water += init; - } - } - - Assert((ulg)s->strstart <= s->window_size - MIN_LOOKAHEAD, - "not enough room for search"); -} - -/* =========================================================================== - * Flush the current block, with given end-of-file flag. - * IN assertion: strstart is set to the end of the current match. - */ -#define FLUSH_BLOCK_ONLY(s, last) { \ - _tr_flush_block(s, (s->block_start >= 0L ? \ - (charf *)&s->window[(unsigned)s->block_start] : \ - (charf *)Z_NULL), \ - (ulg)((long)s->strstart - s->block_start), \ - (last)); \ - s->block_start = s->strstart; \ - flush_pending(s->strm); \ - Tracev((stderr,"[FLUSH]")); \ -} - -/* Same but force premature exit if necessary. */ -#define FLUSH_BLOCK(s, last) { \ - FLUSH_BLOCK_ONLY(s, last); \ - if (s->strm->avail_out == 0) return (last) ? finish_started : need_more; \ -} - -/* =========================================================================== - * Copy without compression as much as possible from the input stream, return - * the current block state. - * This function does not insert new strings in the dictionary since - * uncompressible data is probably not useful. This function is used - * only for the level=0 compression option. - * NOTE: this function should be optimized to avoid extra copying from - * window to pending_buf. - */ -local block_state deflate_stored(s, flush) - deflate_state *s; - int flush; -{ - /* Stored blocks are limited to 0xffff bytes, pending_buf is limited - * to pending_buf_size, and each stored block has a 5 byte header: - */ - ulg max_block_size = 0xffff; - ulg max_start; - - if (max_block_size > s->pending_buf_size - 5) { - max_block_size = s->pending_buf_size - 5; - } - - /* Copy as much as possible from input to output: */ - for (;;) { - /* Fill the window as much as possible: */ - if (s->lookahead <= 1) { - - Assert(s->strstart < s->w_size+MAX_DIST(s) || - s->block_start >= (long)s->w_size, "slide too late"); - - fill_window(s); - if (s->lookahead == 0 && flush == Z_NO_FLUSH) return need_more; - - if (s->lookahead == 0) break; /* flush the current block */ - } - Assert(s->block_start >= 0L, "block gone"); - - s->strstart += s->lookahead; - s->lookahead = 0; - - /* Emit a stored block if pending_buf will be full: */ - max_start = s->block_start + max_block_size; - if (s->strstart == 0 || (ulg)s->strstart >= max_start) { - /* strstart == 0 is possible when wraparound on 16-bit machine */ - s->lookahead = (uInt)(s->strstart - max_start); - s->strstart = (uInt)max_start; - FLUSH_BLOCK(s, 0); - } - /* Flush if we may have to slide, otherwise block_start may become - * negative and the data will be gone: - */ - if (s->strstart - (uInt)s->block_start >= MAX_DIST(s)) { - FLUSH_BLOCK(s, 0); - } - } - s->insert = 0; - if (flush == Z_FINISH) { - FLUSH_BLOCK(s, 1); - return finish_done; - } - if ((long)s->strstart > s->block_start) - FLUSH_BLOCK(s, 0); - return block_done; -} - -/* =========================================================================== - * Compress as much as possible from the input stream, return the current - * block state. - * This function does not perform lazy evaluation of matches and inserts - * new strings in the dictionary only for unmatched strings or for short - * matches. It is used only for the fast compression options. - */ -local block_state deflate_fast(s, flush) - deflate_state *s; - int flush; -{ - IPos hash_head; /* head of the hash chain */ - int bflush; /* set if current block must be flushed */ - - for (;;) { - /* Make sure that we always have enough lookahead, except - * at the end of the input file. We need MAX_MATCH bytes - * for the next match, plus MIN_MATCH bytes to insert the - * string following the next match. - */ - if (s->lookahead < MIN_LOOKAHEAD) { - fill_window(s); - if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) { - return need_more; - } - if (s->lookahead == 0) break; /* flush the current block */ - } - - /* Insert the string window[strstart .. strstart+2] in the - * dictionary, and set hash_head to the head of the hash chain: - */ - hash_head = NIL; - if (s->lookahead >= MIN_MATCH) { - INSERT_STRING(s, s->strstart, hash_head); - } - - /* Find the longest match, discarding those <= prev_length. - * At this point we have always match_length < MIN_MATCH - */ - if (hash_head != NIL && s->strstart - hash_head <= MAX_DIST(s)) { - /* To simplify the code, we prevent matches with the string - * of window index 0 (in particular we have to avoid a match - * of the string with itself at the start of the input file). - */ - s->match_length = longest_match (s, hash_head); - /* longest_match() sets match_start */ - } - if (s->match_length >= MIN_MATCH) { - check_match(s, s->strstart, s->match_start, s->match_length); - - _tr_tally_dist(s, s->strstart - s->match_start, - s->match_length - MIN_MATCH, bflush); - - s->lookahead -= s->match_length; - - /* Insert new strings in the hash table only if the match length - * is not too large. This saves time but degrades compression. - */ -#ifndef FASTEST - if (s->match_length <= s->max_insert_length && - s->lookahead >= MIN_MATCH) { - s->match_length--; /* string at strstart already in table */ - do { - s->strstart++; - INSERT_STRING(s, s->strstart, hash_head); - /* strstart never exceeds WSIZE-MAX_MATCH, so there are - * always MIN_MATCH bytes ahead. - */ - } while (--s->match_length != 0); - s->strstart++; - } else -#endif - { - s->strstart += s->match_length; - s->match_length = 0; - s->ins_h = s->window[s->strstart]; - UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]); -#if MIN_MATCH != 3 - Call UPDATE_HASH() MIN_MATCH-3 more times -#endif - /* If lookahead < MIN_MATCH, ins_h is garbage, but it does not - * matter since it will be recomputed at next deflate call. - */ - } - } else { - /* No match, output a literal byte */ - Tracevv((stderr,"%c", s->window[s->strstart])); - _tr_tally_lit (s, s->window[s->strstart], bflush); - s->lookahead--; - s->strstart++; - } - if (bflush) FLUSH_BLOCK(s, 0); - } - s->insert = s->strstart < MIN_MATCH-1 ? s->strstart : MIN_MATCH-1; - if (flush == Z_FINISH) { - FLUSH_BLOCK(s, 1); - return finish_done; - } - if (s->last_lit) - FLUSH_BLOCK(s, 0); - return block_done; -} - -#ifndef FASTEST -/* =========================================================================== - * Same as above, but achieves better compression. We use a lazy - * evaluation for matches: a match is finally adopted only if there is - * no better match at the next window position. - */ -local block_state deflate_slow(s, flush) - deflate_state *s; - int flush; -{ - IPos hash_head; /* head of hash chain */ - int bflush; /* set if current block must be flushed */ - - /* Process the input block. */ - for (;;) { - /* Make sure that we always have enough lookahead, except - * at the end of the input file. We need MAX_MATCH bytes - * for the next match, plus MIN_MATCH bytes to insert the - * string following the next match. - */ - if (s->lookahead < MIN_LOOKAHEAD) { - fill_window(s); - if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) { - return need_more; - } - if (s->lookahead == 0) break; /* flush the current block */ - } - - /* Insert the string window[strstart .. strstart+2] in the - * dictionary, and set hash_head to the head of the hash chain: - */ - hash_head = NIL; - if (s->lookahead >= MIN_MATCH) { - INSERT_STRING(s, s->strstart, hash_head); - } - - /* Find the longest match, discarding those <= prev_length. - */ - s->prev_length = s->match_length, s->prev_match = s->match_start; - s->match_length = MIN_MATCH-1; - - if (hash_head != NIL && s->prev_length < s->max_lazy_match && - s->strstart - hash_head <= MAX_DIST(s)) { - /* To simplify the code, we prevent matches with the string - * of window index 0 (in particular we have to avoid a match - * of the string with itself at the start of the input file). - */ - s->match_length = longest_match (s, hash_head); - /* longest_match() sets match_start */ - - if (s->match_length <= 5 && (s->strategy == Z_FILTERED -#if TOO_FAR <= 32767 - || (s->match_length == MIN_MATCH && - s->strstart - s->match_start > TOO_FAR) -#endif - )) { - - /* If prev_match is also MIN_MATCH, match_start is garbage - * but we will ignore the current match anyway. - */ - s->match_length = MIN_MATCH-1; - } - } - /* If there was a match at the previous step and the current - * match is not better, output the previous match: - */ - if (s->prev_length >= MIN_MATCH && s->match_length <= s->prev_length) { - uInt max_insert = s->strstart + s->lookahead - MIN_MATCH; - /* Do not insert strings in hash table beyond this. */ - - check_match(s, s->strstart-1, s->prev_match, s->prev_length); - - _tr_tally_dist(s, s->strstart -1 - s->prev_match, - s->prev_length - MIN_MATCH, bflush); - - /* Insert in hash table all strings up to the end of the match. - * strstart-1 and strstart are already inserted. If there is not - * enough lookahead, the last two strings are not inserted in - * the hash table. - */ - s->lookahead -= s->prev_length-1; - s->prev_length -= 2; - do { - if (++s->strstart <= max_insert) { - INSERT_STRING(s, s->strstart, hash_head); - } - } while (--s->prev_length != 0); - s->match_available = 0; - s->match_length = MIN_MATCH-1; - s->strstart++; - - if (bflush) FLUSH_BLOCK(s, 0); - - } else if (s->match_available) { - /* If there was no match at the previous position, output a - * single literal. If there was a match but the current match - * is longer, truncate the previous match to a single literal. - */ - Tracevv((stderr,"%c", s->window[s->strstart-1])); - _tr_tally_lit(s, s->window[s->strstart-1], bflush); - if (bflush) { - FLUSH_BLOCK_ONLY(s, 0); - } - s->strstart++; - s->lookahead--; - if (s->strm->avail_out == 0) return need_more; - } else { - /* There is no previous match to compare with, wait for - * the next step to decide. - */ - s->match_available = 1; - s->strstart++; - s->lookahead--; - } - } - Assert (flush != Z_NO_FLUSH, "no flush?"); - if (s->match_available) { - Tracevv((stderr,"%c", s->window[s->strstart-1])); - _tr_tally_lit(s, s->window[s->strstart-1], bflush); - s->match_available = 0; - } - s->insert = s->strstart < MIN_MATCH-1 ? s->strstart : MIN_MATCH-1; - if (flush == Z_FINISH) { - FLUSH_BLOCK(s, 1); - return finish_done; - } - if (s->last_lit) - FLUSH_BLOCK(s, 0); - return block_done; -} -#endif /* FASTEST */ - -/* =========================================================================== - * For Z_RLE, simply look for runs of bytes, generate matches only of distance - * one. Do not maintain a hash table. (It will be regenerated if this run of - * deflate switches away from Z_RLE.) - */ -local block_state deflate_rle(s, flush) - deflate_state *s; - int flush; -{ - int bflush; /* set if current block must be flushed */ - uInt prev; /* byte at distance one to match */ - Bytef *scan, *strend; /* scan goes up to strend for length of run */ - - for (;;) { - /* Make sure that we always have enough lookahead, except - * at the end of the input file. We need MAX_MATCH bytes - * for the longest run, plus one for the unrolled loop. - */ - if (s->lookahead <= MAX_MATCH) { - fill_window(s); - if (s->lookahead <= MAX_MATCH && flush == Z_NO_FLUSH) { - return need_more; - } - if (s->lookahead == 0) break; /* flush the current block */ - } - - /* See how many times the previous byte repeats */ - s->match_length = 0; - if (s->lookahead >= MIN_MATCH && s->strstart > 0) { - scan = s->window + s->strstart - 1; - prev = *scan; - if (prev == *++scan && prev == *++scan && prev == *++scan) { - strend = s->window + s->strstart + MAX_MATCH; - do { - } while (prev == *++scan && prev == *++scan && - prev == *++scan && prev == *++scan && - prev == *++scan && prev == *++scan && - prev == *++scan && prev == *++scan && - scan < strend); - s->match_length = MAX_MATCH - (int)(strend - scan); - if (s->match_length > s->lookahead) - s->match_length = s->lookahead; - } - Assert(scan <= s->window+(uInt)(s->window_size-1), "wild scan"); - } - - /* Emit match if have run of MIN_MATCH or longer, else emit literal */ - if (s->match_length >= MIN_MATCH) { - check_match(s, s->strstart, s->strstart - 1, s->match_length); - - _tr_tally_dist(s, 1, s->match_length - MIN_MATCH, bflush); - - s->lookahead -= s->match_length; - s->strstart += s->match_length; - s->match_length = 0; - } else { - /* No match, output a literal byte */ - Tracevv((stderr,"%c", s->window[s->strstart])); - _tr_tally_lit (s, s->window[s->strstart], bflush); - s->lookahead--; - s->strstart++; - } - if (bflush) FLUSH_BLOCK(s, 0); - } - s->insert = 0; - if (flush == Z_FINISH) { - FLUSH_BLOCK(s, 1); - return finish_done; - } - if (s->last_lit) - FLUSH_BLOCK(s, 0); - return block_done; -} - -/* =========================================================================== - * For Z_HUFFMAN_ONLY, do not look for matches. Do not maintain a hash table. - * (It will be regenerated if this run of deflate switches away from Huffman.) - */ -local block_state deflate_huff(s, flush) - deflate_state *s; - int flush; -{ - int bflush; /* set if current block must be flushed */ - - for (;;) { - /* Make sure that we have a literal to write. */ - if (s->lookahead == 0) { - fill_window(s); - if (s->lookahead == 0) { - if (flush == Z_NO_FLUSH) - return need_more; - break; /* flush the current block */ - } - } - - /* Output a literal byte */ - s->match_length = 0; - Tracevv((stderr,"%c", s->window[s->strstart])); - _tr_tally_lit (s, s->window[s->strstart], bflush); - s->lookahead--; - s->strstart++; - if (bflush) FLUSH_BLOCK(s, 0); - } - s->insert = 0; - if (flush == Z_FINISH) { - FLUSH_BLOCK(s, 1); - return finish_done; - } - if (s->last_lit) - FLUSH_BLOCK(s, 0); - return block_done; -} diff --git a/sdk-modifications/libsrc/zlib/deflate.h b/sdk-modifications/libsrc/zlib/deflate.h deleted file mode 100755 index fbac44d..0000000 --- a/sdk-modifications/libsrc/zlib/deflate.h +++ /dev/null @@ -1,346 +0,0 @@ -/* deflate.h -- internal compression state - * Copyright (C) 1995-2012 Jean-loup Gailly - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -/* @(#) $Id$ */ - -#ifndef DEFLATE_H -#define DEFLATE_H - -#include "zutil.h" - -/* define NO_GZIP when compiling if you want to disable gzip header and - trailer creation by deflate(). NO_GZIP would be used to avoid linking in - the crc code when it is not needed. For shared libraries, gzip encoding - should be left enabled. */ -#ifndef NO_GZIP -# define GZIP -#endif - -/* =========================================================================== - * Internal compression state. - */ - -#define LENGTH_CODES 29 -/* number of length codes, not counting the special END_BLOCK code */ - -#define LITERALS 256 -/* number of literal bytes 0..255 */ - -#define L_CODES (LITERALS+1+LENGTH_CODES) -/* number of Literal or Length codes, including the END_BLOCK code */ - -#define D_CODES 30 -/* number of distance codes */ - -#define BL_CODES 19 -/* number of codes used to transfer the bit lengths */ - -#define HEAP_SIZE (2*L_CODES+1) -/* maximum heap size */ - -#define MAX_BITS 15 -/* All codes must not exceed MAX_BITS bits */ - -#define Buf_size 16 -/* size of bit buffer in bi_buf */ - -#define INIT_STATE 42 -#define EXTRA_STATE 69 -#define NAME_STATE 73 -#define COMMENT_STATE 91 -#define HCRC_STATE 103 -#define BUSY_STATE 113 -#define FINISH_STATE 666 -/* Stream status */ - - -/* Data structure describing a single value and its code string. */ -typedef struct ct_data_s { - union { - ush freq; /* frequency count */ - ush code; /* bit string */ - } fc; - union { - ush dad; /* father node in Huffman tree */ - ush len; /* length of bit string */ - } dl; -} FAR ct_data; - -#define Freq fc.freq -#define Code fc.code -#define Dad dl.dad -#define Len dl.len - -typedef struct static_tree_desc_s static_tree_desc; - -typedef struct tree_desc_s { - ct_data *dyn_tree; /* the dynamic tree */ - int max_code; /* largest code with non zero frequency */ - static_tree_desc *stat_desc; /* the corresponding static tree */ -} FAR tree_desc; - -typedef ush Pos; -typedef Pos FAR Posf; -typedef unsigned IPos; - -/* A Pos is an index in the character window. We use short instead of int to - * save space in the various tables. IPos is used only for parameter passing. - */ - -typedef struct internal_state { - z_streamp strm; /* pointer back to this zlib stream */ - int status; /* as the name implies */ - Bytef *pending_buf; /* output still pending */ - ulg pending_buf_size; /* size of pending_buf */ - Bytef *pending_out; /* next pending byte to output to the stream */ - uInt pending; /* nb of bytes in the pending buffer */ - int wrap; /* bit 0 true for zlib, bit 1 true for gzip */ - gz_headerp gzhead; /* gzip header information to write */ - uInt gzindex; /* where in extra, name, or comment */ - Byte method; /* STORED (for zip only) or DEFLATED */ - int last_flush; /* value of flush param for previous deflate call */ - - /* used by deflate.c: */ - - uInt w_size; /* LZ77 window size (32K by default) */ - uInt w_bits; /* log2(w_size) (8..16) */ - uInt w_mask; /* w_size - 1 */ - - Bytef *window; - /* Sliding window. Input bytes are read into the second half of the window, - * and move to the first half later to keep a dictionary of at least wSize - * bytes. With this organization, matches are limited to a distance of - * wSize-MAX_MATCH bytes, but this ensures that IO is always - * performed with a length multiple of the block size. Also, it limits - * the window size to 64K, which is quite useful on MSDOS. - * To do: use the user input buffer as sliding window. - */ - - ulg window_size; - /* Actual size of window: 2*wSize, except when the user input buffer - * is directly used as sliding window. - */ - - Posf *prev; - /* Link to older string with same hash index. To limit the size of this - * array to 64K, this link is maintained only for the last 32K strings. - * An index in this array is thus a window index modulo 32K. - */ - - Posf *head; /* Heads of the hash chains or NIL. */ - - uInt ins_h; /* hash index of string to be inserted */ - uInt hash_size; /* number of elements in hash table */ - uInt hash_bits; /* log2(hash_size) */ - uInt hash_mask; /* hash_size-1 */ - - uInt hash_shift; - /* Number of bits by which ins_h must be shifted at each input - * step. It must be such that after MIN_MATCH steps, the oldest - * byte no longer takes part in the hash key, that is: - * hash_shift * MIN_MATCH >= hash_bits - */ - - long block_start; - /* Window position at the beginning of the current output block. Gets - * negative when the window is moved backwards. - */ - - uInt match_length; /* length of best match */ - IPos prev_match; /* previous match */ - int match_available; /* set if previous match exists */ - uInt strstart; /* start of string to insert */ - uInt match_start; /* start of matching string */ - uInt lookahead; /* number of valid bytes ahead in window */ - - uInt prev_length; - /* Length of the best match at previous step. Matches not greater than this - * are discarded. This is used in the lazy match evaluation. - */ - - uInt max_chain_length; - /* To speed up deflation, hash chains are never searched beyond this - * length. A higher limit improves compression ratio but degrades the - * speed. - */ - - uInt max_lazy_match; - /* Attempt to find a better match only when the current match is strictly - * smaller than this value. This mechanism is used only for compression - * levels >= 4. - */ -# define max_insert_length max_lazy_match - /* Insert new strings in the hash table only if the match length is not - * greater than this length. This saves time but degrades compression. - * max_insert_length is used only for compression levels <= 3. - */ - - int level; /* compression level (1..9) */ - int strategy; /* favor or force Huffman coding*/ - - uInt good_match; - /* Use a faster search when the previous match is longer than this */ - - int nice_match; /* Stop searching when current match exceeds this */ - - /* used by trees.c: */ - /* Didn't use ct_data typedef below to suppress compiler warning */ - struct ct_data_s dyn_ltree[HEAP_SIZE]; /* literal and length tree */ - struct ct_data_s dyn_dtree[2*D_CODES+1]; /* distance tree */ - struct ct_data_s bl_tree[2*BL_CODES+1]; /* Huffman tree for bit lengths */ - - struct tree_desc_s l_desc; /* desc. for literal tree */ - struct tree_desc_s d_desc; /* desc. for distance tree */ - struct tree_desc_s bl_desc; /* desc. for bit length tree */ - - ush bl_count[MAX_BITS+1]; - /* number of codes at each bit length for an optimal tree */ - - int heap[2*L_CODES+1]; /* heap used to build the Huffman trees */ - int heap_len; /* number of elements in the heap */ - int heap_max; /* element of largest frequency */ - /* The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used. - * The same heap array is used to build all trees. - */ - - uch depth[2*L_CODES+1]; - /* Depth of each subtree used as tie breaker for trees of equal frequency - */ - - uchf *l_buf; /* buffer for literals or lengths */ - - uInt lit_bufsize; - /* Size of match buffer for literals/lengths. There are 4 reasons for - * limiting lit_bufsize to 64K: - * - frequencies can be kept in 16 bit counters - * - if compression is not successful for the first block, all input - * data is still in the window so we can still emit a stored block even - * when input comes from standard input. (This can also be done for - * all blocks if lit_bufsize is not greater than 32K.) - * - if compression is not successful for a file smaller than 64K, we can - * even emit a stored file instead of a stored block (saving 5 bytes). - * This is applicable only for zip (not gzip or zlib). - * - creating new Huffman trees less frequently may not provide fast - * adaptation to changes in the input data statistics. (Take for - * example a binary file with poorly compressible code followed by - * a highly compressible string table.) Smaller buffer sizes give - * fast adaptation but have of course the overhead of transmitting - * trees more frequently. - * - I can't count above 4 - */ - - uInt last_lit; /* running index in l_buf */ - - ushf *d_buf; - /* Buffer for distances. To simplify the code, d_buf and l_buf have - * the same number of elements. To use different lengths, an extra flag - * array would be necessary. - */ - - ulg opt_len; /* bit length of current block with optimal trees */ - ulg static_len; /* bit length of current block with static trees */ - uInt matches; /* number of string matches in current block */ - uInt insert; /* bytes at end of window left to insert */ - -#ifdef DEBUG - ulg compressed_len; /* total bit length of compressed file mod 2^32 */ - ulg bits_sent; /* bit length of compressed data sent mod 2^32 */ -#endif - - ush bi_buf; - /* Output buffer. bits are inserted starting at the bottom (least - * significant bits). - */ - int bi_valid; - /* Number of valid bits in bi_buf. All bits above the last valid bit - * are always zero. - */ - - ulg high_water; - /* High water mark offset in window for initialized bytes -- bytes above - * this are set to zero in order to avoid memory check warnings when - * longest match routines access bytes past the input. This is then - * updated to the new high water mark. - */ - -} FAR deflate_state; - -/* Output a byte on the stream. - * IN assertion: there is enough room in pending_buf. - */ -#define put_byte(s, c) {s->pending_buf[s->pending++] = (c);} - - -#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1) -/* Minimum amount of lookahead, except at the end of the input file. - * See deflate.c for comments about the MIN_MATCH+1. - */ - -#define MAX_DIST(s) ((s)->w_size-MIN_LOOKAHEAD) -/* In order to simplify the code, particularly on 16 bit machines, match - * distances are limited to MAX_DIST instead of WSIZE. - */ - -#define WIN_INIT MAX_MATCH -/* Number of bytes after end of data in window to initialize in order to avoid - memory checker errors from longest match routines */ - - /* in trees.c */ -void ZLIB_INTERNAL _tr_init OF((deflate_state *s)); -int ZLIB_INTERNAL _tr_tally OF((deflate_state *s, unsigned dist, unsigned lc)); -void ZLIB_INTERNAL _tr_flush_block OF((deflate_state *s, charf *buf, - ulg stored_len, int last)); -void ZLIB_INTERNAL _tr_flush_bits OF((deflate_state *s)); -void ZLIB_INTERNAL _tr_align OF((deflate_state *s)); -void ZLIB_INTERNAL _tr_stored_block OF((deflate_state *s, charf *buf, - ulg stored_len, int last)); - -#define d_code(dist) \ - ((dist) < 256 ? _dist_code[dist] : _dist_code[256+((dist)>>7)]) -/* Mapping from a distance to a distance code. dist is the distance - 1 and - * must not have side effects. _dist_code[256] and _dist_code[257] are never - * used. - */ - -#ifndef DEBUG -/* Inline versions of _tr_tally for speed: */ - -#if defined(GEN_TREES_H) || !defined(STDC) - extern uch ZLIB_INTERNAL _length_code[]; - extern uch ZLIB_INTERNAL _dist_code[]; -#else - extern const uch ZLIB_INTERNAL _length_code[]; - extern const uch ZLIB_INTERNAL _dist_code[]; -#endif - -# define _tr_tally_lit(s, c, flush) \ - { uch cc = (c); \ - s->d_buf[s->last_lit] = 0; \ - s->l_buf[s->last_lit++] = cc; \ - s->dyn_ltree[cc].Freq++; \ - flush = (s->last_lit == s->lit_bufsize-1); \ - } -# define _tr_tally_dist(s, distance, length, flush) \ - { uch len = (length); \ - ush dist = (distance); \ - s->d_buf[s->last_lit] = dist; \ - s->l_buf[s->last_lit++] = len; \ - dist--; \ - s->dyn_ltree[_length_code[len]+LITERALS+1].Freq++; \ - s->dyn_dtree[d_code(dist)].Freq++; \ - flush = (s->last_lit == s->lit_bufsize-1); \ - } -#else -# define _tr_tally_lit(s, c, flush) flush = _tr_tally(s, 0, c) -# define _tr_tally_dist(s, distance, length, flush) \ - flush = _tr_tally(s, distance, length) -#endif - -#endif /* DEFLATE_H */ diff --git a/sdk-modifications/libsrc/zlib/gzclose.c b/sdk-modifications/libsrc/zlib/gzclose.c deleted file mode 100755 index caeb99a..0000000 --- a/sdk-modifications/libsrc/zlib/gzclose.c +++ /dev/null @@ -1,25 +0,0 @@ -/* gzclose.c -- zlib gzclose() function - * Copyright (C) 2004, 2010 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#include "gzguts.h" - -/* gzclose() is in a separate file so that it is linked in only if it is used. - That way the other gzclose functions can be used instead to avoid linking in - unneeded compression or decompression routines. */ -int ZEXPORT gzclose(file) - gzFile file; -{ -#ifndef NO_GZCOMPRESS - gz_statep state; - - if (file == NULL) - return Z_STREAM_ERROR; - state = (gz_statep)file; - - return state->mode == GZ_READ ? gzclose_r(file) : gzclose_w(file); -#else - return gzclose_r(file); -#endif -} diff --git a/sdk-modifications/libsrc/zlib/gzguts.h b/sdk-modifications/libsrc/zlib/gzguts.h deleted file mode 100755 index 5405749..0000000 --- a/sdk-modifications/libsrc/zlib/gzguts.h +++ /dev/null @@ -1,196 +0,0 @@ -/* gzguts.h -- zlib internal header definitions for gz* operations - * Copyright (C) 2004, 2005, 2010, 2011, 2012 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#ifdef _LARGEFILE64_SOURCE -# ifndef _LARGEFILE_SOURCE -# define _LARGEFILE_SOURCE 1 -# endif -# ifdef _FILE_OFFSET_BITS -# undef _FILE_OFFSET_BITS -# endif -#endif - -#if ((__GNUC__-0) * 10 + __GNUC_MINOR__-0 >= 33) && !defined(NO_VIZ) -# define ZLIB_INTERNAL __attribute__((visibility ("hidden"))) -#else -# define ZLIB_INTERNAL -#endif - -//#include <stdio.h> -#include "zlib.h" - -#include <ds2_malloc.h> -#include <fs_api.h> -#include <ds2_unistd.h> -#include <ds2_fcntl.h> - -#ifdef STDC -//# include <string.h> -//# include <stdlib.h> -//# include <limits.h> -#endif -//#include <fcntl.h> - -#ifdef __TURBOC__ -# include <io.h> -#endif - -#ifdef NO_DEFLATE /* for compatibility with old definition */ -# define NO_GZCOMPRESS -#endif - -#if defined(STDC99) || (defined(__TURBOC__) && __TURBOC__ >= 0x550) -# ifndef HAVE_VSNPRINTF -# define HAVE_VSNPRINTF -# endif -#endif - -#if defined(__CYGWIN__) -# ifndef HAVE_VSNPRINTF -# define HAVE_VSNPRINTF -# endif -#endif - -#if defined(MSDOS) && defined(__BORLANDC__) && (BORLANDC > 0x410) -# ifndef HAVE_VSNPRINTF -# define HAVE_VSNPRINTF -# endif -#endif - -#ifndef HAVE_VSNPRINTF -# ifdef MSDOS -/* vsnprintf may exist on some MS-DOS compilers (DJGPP?), - but for now we just assume it doesn't. */ -# define NO_vsnprintf -# endif -# ifdef __TURBOC__ -# define NO_vsnprintf -# endif -# ifdef WIN32 -/* In Win32, vsnprintf is available as the "non-ANSI" _vsnprintf. */ -# if !defined(vsnprintf) && !defined(NO_vsnprintf) -# if !defined(_MSC_VER) || ( defined(_MSC_VER) && _MSC_VER < 1500 ) -# include <io.h> -# define vsnprintf _vsnprintf -# endif -# endif -# endif -# ifdef __SASC -# define NO_vsnprintf -# endif -# ifdef VMS -# define NO_vsnprintf -# endif -# ifdef __OS400__ -# define NO_vsnprintf -# endif -# ifdef __MVS__ -# define NO_vsnprintf -# endif -#endif - -#ifndef local -# define local static -#endif -/* compile with -Dlocal if your debugger can't find static symbols */ - -/* gz* functions always use library allocation functions */ -#ifndef STDC - extern voidp malloc OF((uInt size)); - extern void free OF((voidpf ptr)); -#endif - -/* get errno and strerror definition */ -#if defined UNDER_CE -# include <windows.h> -# define zstrerror() gz_strwinerror((DWORD)GetLastError()) -#else -# ifdef STDC -# // include <errno.h> -# define zstrerror() strerror(errno) -# else -# define zstrerror() "stdio error (consult errno)" -# endif -#endif - -/* provide prototypes for these when building zlib without LFS */ -#if !defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0 - ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *)); - ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int)); - ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile)); - ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile)); -#endif - -/* default memLevel */ -#if MAX_MEM_LEVEL >= 8 -# define DEF_MEM_LEVEL 8 -#else -# define DEF_MEM_LEVEL MAX_MEM_LEVEL -#endif - -/* default i/o buffer size -- double this for output when reading */ -#define GZBUFSIZE 8192 - -/* gzip modes, also provide a little integrity check on the passed structure */ -#define GZ_NONE 0 -#define GZ_READ 7247 -#define GZ_WRITE 31153 -#define GZ_APPEND 1 /* mode set to GZ_WRITE after the file is opened */ - -/* values for gz_state how */ -#define LOOK 0 /* look for a gzip header */ -#define COPY 1 /* copy input directly */ -#define GZIP 2 /* decompress a gzip stream */ - -/* internal gzip file state data structure */ -typedef struct { - /* exposed contents for gzgetc() macro */ - struct gzFile_s x; /* "x" for exposed */ - /* x.have: number of bytes available at x.next */ - /* x.next: next output data to deliver or write */ - /* x.pos: current position in uncompressed data */ - /* used for both reading and writing */ - int mode; /* see gzip modes above */ - int fd; /* file descriptor */ - char *path; /* path or fd for error messages */ - unsigned size; /* buffer size, zero if not allocated yet */ - unsigned want; /* requested buffer size, default is GZBUFSIZE */ - unsigned char *in; /* input buffer */ - unsigned char *out; /* output buffer (double-sized when reading) */ - int direct; /* 0 if processing gzip, 1 if transparent */ - /* just for reading */ - int how; /* 0: get header, 1: copy, 2: decompress */ - z_off64_t start; /* where the gzip data started, for rewinding */ - int eof; /* true if end of input file reached */ - int past; /* true if read requested past end */ - /* just for writing */ - int level; /* compression level */ - int strategy; /* compression strategy */ - /* seek request */ - z_off64_t skip; /* amount to skip (already rewound if backwards) */ - int seek; /* true if seek request pending */ - /* error information */ - int err; /* error code */ - char *msg; /* error message */ - /* zlib inflate or deflate stream */ - z_stream strm; /* stream structure in-place (not a pointer) */ -} gz_state; -typedef gz_state FAR *gz_statep; - -/* shared functions */ -void ZLIB_INTERNAL gz_error OF((gz_statep, int, const char *)); -#if defined UNDER_CE -char ZLIB_INTERNAL *gz_strwinerror OF((DWORD error)); -#endif - -/* GT_OFF(x), where x is an unsigned value, is true if x > maximum z_off64_t - value -- needed when comparing unsigned to z_off64_t, which is signed - (possible z_off64_t types off_t, off64_t, and long are all signed) */ -#ifdef INT_MAX -# define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > INT_MAX) -#else -unsigned ZLIB_INTERNAL gz_intmax OF((void)); -# define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > gz_intmax()) -#endif diff --git a/sdk-modifications/libsrc/zlib/gzlib.c b/sdk-modifications/libsrc/zlib/gzlib.c deleted file mode 100755 index 7aedab8..0000000 --- a/sdk-modifications/libsrc/zlib/gzlib.c +++ /dev/null @@ -1,564 +0,0 @@ -/* gzlib.c -- zlib functions common to reading and writing gzip files - * Copyright (C) 2004, 2010, 2011 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#include "gzguts.h" - -#if defined(_WIN32) && !defined(__BORLANDC__) -# define LSEEK _lseeki64 -#else -#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0 -# define LSEEK lseek64 -#else -# define LSEEK lseek -#endif -#endif - -/* Local functions */ -local void gz_reset OF((gz_statep)); -local gzFile gz_open OF((const char *, int, const char *)); - -#if defined UNDER_CE - -/* Map the Windows error number in ERROR to a locale-dependent error message - string and return a pointer to it. Typically, the values for ERROR come - from GetLastError. - - The string pointed to shall not be modified by the application, but may be - overwritten by a subsequent call to gz_strwinerror - - The gz_strwinerror function does not change the current setting of - GetLastError. */ -char ZLIB_INTERNAL *gz_strwinerror (error) - DWORD error; -{ - static char buf[1024]; - - wchar_t *msgbuf; - DWORD lasterr = GetLastError(); - DWORD chars = FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM - | FORMAT_MESSAGE_ALLOCATE_BUFFER, - NULL, - error, - 0, /* Default language */ - (LPVOID)&msgbuf, - 0, - NULL); - if (chars != 0) { - /* If there is an \r\n appended, zap it. */ - if (chars >= 2 - && msgbuf[chars - 2] == '\r' && msgbuf[chars - 1] == '\n') { - chars -= 2; - msgbuf[chars] = 0; - } - - if (chars > sizeof (buf) - 1) { - chars = sizeof (buf) - 1; - msgbuf[chars] = 0; - } - - wcstombs(buf, msgbuf, chars + 1); - LocalFree(msgbuf); - } - else { - sprintf(buf, "unknown win32 error (%ld)", error); - } - - SetLastError(lasterr); - return buf; -} - -#endif /* UNDER_CE */ - -/* Reset gzip file state */ -local void gz_reset(state) - gz_statep state; -{ - state->x.have = 0; /* no output data available */ - if (state->mode == GZ_READ) { /* for reading ... */ - state->eof = 0; /* not at end of file */ - state->past = 0; /* have not read past end yet */ - state->how = LOOK; /* look for gzip header */ - } - state->seek = 0; /* no seek request pending */ - gz_error(state, Z_OK, NULL); /* clear error */ - state->x.pos = 0; /* no uncompressed data yet */ - state->strm.avail_in = 0; /* no input data yet */ -} - -/* Open a gzip file either by name or file descriptor. */ -local gzFile gz_open(path, fd, mode) - const char *path; - int fd; - const char *mode; -{ - gz_statep state; - - /* check input */ - if (path == NULL) - return NULL; - - /* allocate gzFile structure to return */ - state = malloc(sizeof(gz_state)); - if (state == NULL) - return NULL; - state->size = 0; /* no buffers allocated yet */ - state->want = GZBUFSIZE; /* requested buffer size */ - state->msg = NULL; /* no error message yet */ - - /* interpret mode */ - state->mode = GZ_NONE; - state->level = Z_DEFAULT_COMPRESSION; - state->strategy = Z_DEFAULT_STRATEGY; - state->direct = 0; - while (*mode) { - if (*mode >= '0' && *mode <= '9') - state->level = *mode - '0'; - else - switch (*mode) { - case 'r': - state->mode = GZ_READ; - break; -#ifndef NO_GZCOMPRESS - case 'w': - state->mode = GZ_WRITE; - break; - case 'a': - state->mode = GZ_APPEND; - break; -#endif - case '+': /* can't read and write at the same time */ - free(state); - return NULL; - case 'b': /* ignore -- will request binary anyway */ - break; - case 'f': - state->strategy = Z_FILTERED; - break; - case 'h': - state->strategy = Z_HUFFMAN_ONLY; - break; - case 'R': - state->strategy = Z_RLE; - break; - case 'F': - state->strategy = Z_FIXED; - case 'T': - state->direct = 1; - default: /* could consider as an error, but just ignore */ - ; - } - mode++; - } - - /* must provide an "r", "w", or "a" */ - if (state->mode == GZ_NONE) { - free(state); - return NULL; - } - - /* can't force transparent read */ - if (state->mode == GZ_READ) { - if (state->direct) { - free(state); - return NULL; - } - state->direct = 1; /* for empty file */ - } - - /* save the path name for error messages */ - state->path = malloc(strlen(path) + 1); - if (state->path == NULL) { - free(state); - return NULL; - } - strcpy(state->path, path); - - /* open the file with the appropriate mode (or just use fd) */ - state->fd = fd != -1 ? fd : - open(path, -#ifdef O_LARGEFILE - O_LARGEFILE | -#endif -#ifdef O_BINARY - O_BINARY | -#endif - (state->mode == GZ_READ ? - O_RDONLY : - (O_WRONLY | O_CREAT | ( - state->mode == GZ_WRITE ? - O_TRUNC : - O_APPEND))), - 0666); - if (state->fd == -1) { - free(state->path); - free(state); - return NULL; - } - if (state->mode == GZ_APPEND) - state->mode = GZ_WRITE; /* simplify later checks */ - - /* save the current position for rewinding (only if reading) */ - if (state->mode == GZ_READ) { - state->start = LSEEK(state->fd, 0, SEEK_CUR); - if (state->start == -1) state->start = 0; - } - - /* initialize stream */ - gz_reset(state); - - /* return stream */ - return (gzFile)state; -} - -/* -- see zlib.h -- */ -gzFile ZEXPORT gzopen(path, mode) - const char *path; - const char *mode; -{ - return gz_open(path, -1, mode); -} - -/* -- see zlib.h -- */ -gzFile ZEXPORT gzopen64(path, mode) - const char *path; - const char *mode; -{ - return gz_open(path, -1, mode); -} - -/* -- see zlib.h -- */ -gzFile ZEXPORT gzdopen(fd, mode) - int fd; - const char *mode; -{ - char *path; /* identifier for error messages */ - gzFile gz; - - if (fd == -1 || (path = malloc(7 + 3 * sizeof(int))) == NULL) - return NULL; - sprintf(path, "<fd:%d>", fd); /* for debugging */ - gz = gz_open(path, fd, mode); - free(path); - return gz; -} - -/* -- see zlib.h -- */ -int ZEXPORT gzbuffer(file, size) - gzFile file; - unsigned size; -{ - gz_statep state; - - /* get internal structure and check integrity */ - if (file == NULL) - return -1; - state = (gz_statep)file; - if (state->mode != GZ_READ && state->mode != GZ_WRITE) - return -1; - - /* make sure we haven't already allocated memory */ - if (state->size != 0) - return -1; - - /* check and set requested size */ - if (size < 2) - size = 2; /* need two bytes to check magic header */ - state->want = size; - return 0; -} - -/* -- see zlib.h -- */ -int ZEXPORT gzrewind(file) - gzFile file; -{ - gz_statep state; - - /* get internal structure */ - if (file == NULL) - return -1; - state = (gz_statep)file; - - /* check that we're reading and that there's no error */ - if (state->mode != GZ_READ || - (state->err != Z_OK && state->err != Z_BUF_ERROR)) - return -1; - - /* back up and start over */ - if (LSEEK(state->fd, state->start, SEEK_SET) == -1) - return -1; - gz_reset(state); - return 0; -} - -/* -- see zlib.h -- */ -z_off64_t ZEXPORT gzseek64(file, offset, whence) - gzFile file; - z_off64_t offset; - int whence; -{ - unsigned n; - z_off64_t ret; - gz_statep state; - - /* get internal structure and check integrity */ - if (file == NULL) - return -1; - state = (gz_statep)file; - if (state->mode != GZ_READ && state->mode != GZ_WRITE) - return -1; - - /* check that there's no error */ - if (state->err != Z_OK && state->err != Z_BUF_ERROR) - return -1; - - /* can only seek from start or relative to current position */ - if (whence != SEEK_SET && whence != SEEK_CUR) - return -1; - - /* normalize offset to a SEEK_CUR specification */ - if (whence == SEEK_SET) - offset -= state->x.pos; - else if (state->seek) - offset += state->skip; - state->seek = 0; - - /* if within raw area while reading, just go there */ - if (state->mode == GZ_READ && state->how == COPY && - state->x.pos + offset >= 0) { - ret = LSEEK(state->fd, offset - state->x.have, SEEK_CUR); - if (ret == -1) - return -1; - state->x.have = 0; - state->eof = 0; - state->past = 0; - state->seek = 0; - gz_error(state, Z_OK, NULL); - state->strm.avail_in = 0; - state->x.pos += offset; - return state->x.pos; - } - - /* calculate skip amount, rewinding if needed for back seek when reading */ - if (offset < 0) { - if (state->mode != GZ_READ) /* writing -- can't go backwards */ - return -1; - offset += state->x.pos; - if (offset < 0) /* before start of file! */ - return -1; - if (gzrewind(file) == -1) /* rewind, then skip to offset */ - return -1; - } - - /* if reading, skip what's in output buffer (one less gzgetc() check) */ - if (state->mode == GZ_READ) { - n = GT_OFF(state->x.have) || (z_off64_t)state->x.have > offset ? - (unsigned)offset : state->x.have; - state->x.have -= n; - state->x.next += n; - state->x.pos += n; - offset -= n; - } - - /* request skip (if not zero) */ - if (offset) { - state->seek = 1; - state->skip = offset; - } - return state->x.pos + offset; -} - -/* -- see zlib.h -- */ -z_off_t ZEXPORT gzseek(file, offset, whence) - gzFile file; - z_off_t offset; - int whence; -{ - z_off64_t ret; - - ret = gzseek64(file, (z_off64_t)offset, whence); - return ret == (z_off_t)ret ? (z_off_t)ret : -1; -} - -/* -- see zlib.h -- */ -z_off64_t ZEXPORT gztell64(file) - gzFile file; -{ - gz_statep state; - - /* get internal structure and check integrity */ - if (file == NULL) - return -1; - state = (gz_statep)file; - if (state->mode != GZ_READ && state->mode != GZ_WRITE) - return -1; - - /* return position */ - return state->x.pos + (state->seek ? state->skip : 0); -} - -/* -- see zlib.h -- */ -z_off_t ZEXPORT gztell(file) - gzFile file; -{ - z_off64_t ret; - - ret = gztell64(file); - return ret == (z_off_t)ret ? (z_off_t)ret : -1; -} - -/* -- see zlib.h -- */ -z_off64_t ZEXPORT gzoffset64(file) - gzFile file; -{ - z_off64_t offset; - gz_statep state; - - /* get internal structure and check integrity */ - if (file == NULL) - return -1; - state = (gz_statep)file; - if (state->mode != GZ_READ && state->mode != GZ_WRITE) - return -1; - - /* compute and return effective offset in file */ - offset = LSEEK(state->fd, 0, SEEK_CUR); - if (offset == -1) - return -1; - if (state->mode == GZ_READ) /* reading */ - offset -= state->strm.avail_in; /* don't count buffered input */ - return offset; -} - -/* -- see zlib.h -- */ -z_off_t ZEXPORT gzoffset(file) - gzFile file; -{ - z_off64_t ret; - - ret = gzoffset64(file); - return ret == (z_off_t)ret ? (z_off_t)ret : -1; -} - -/* -- see zlib.h -- */ -int ZEXPORT gzeof(file) - gzFile file; -{ - gz_statep state; - - /* get internal structure and check integrity */ - if (file == NULL) - return 0; - state = (gz_statep)file; - if (state->mode != GZ_READ && state->mode != GZ_WRITE) - return 0; - - /* return end-of-file state */ - return state->mode == GZ_READ ? state->past : 0; -} - -/* -- see zlib.h -- */ -const char * ZEXPORT gzerror(file, errnum) - gzFile file; - int *errnum; -{ - gz_statep state; - - /* get internal structure and check integrity */ - if (file == NULL) - return NULL; - state = (gz_statep)file; - if (state->mode != GZ_READ && state->mode != GZ_WRITE) - return NULL; - - /* return error information */ - if (errnum != NULL) - *errnum = state->err; - return state->msg == NULL ? "" : state->msg; -} - -/* -- see zlib.h -- */ -void ZEXPORT gzclearerr(file) - gzFile file; -{ - gz_statep state; - - /* get internal structure and check integrity */ - if (file == NULL) - return; - state = (gz_statep)file; - if (state->mode != GZ_READ && state->mode != GZ_WRITE) - return; - - /* clear error and end-of-file */ - if (state->mode == GZ_READ) { - state->eof = 0; - state->past = 0; - } - gz_error(state, Z_OK, NULL); -} - -/* Create an error message in allocated memory and set state->err and - state->msg accordingly. Free any previous error message already there. Do - not try to free or allocate space if the error is Z_MEM_ERROR (out of - memory). Simply save the error message as a static string. If there is an - allocation failure constructing the error message, then convert the error to - out of memory. */ -void ZLIB_INTERNAL gz_error(state, err, msg) - gz_statep state; - int err; - const char *msg; -{ - /* free previously allocated message and clear */ - if (state->msg != NULL) { - if (state->err != Z_MEM_ERROR) - free(state->msg); - state->msg = NULL; - } - - /* if fatal, set state->x.have to 0 so that the gzgetc() macro fails */ - if (err != Z_OK && err != Z_BUF_ERROR) - state->x.have = 0; - - /* set error code, and if no message, then done */ - state->err = err; - if (msg == NULL) - return; - - /* for an out of memory error, save as static string */ - if (err == Z_MEM_ERROR) { - state->msg = (char *)msg; - return; - } - - /* construct error message with path */ - if ((state->msg = malloc(strlen(state->path) + strlen(msg) + 3)) == NULL) { - state->err = Z_MEM_ERROR; - state->msg = (char *)"out of memory"; - return; - } - strcpy(state->msg, state->path); - strcat(state->msg, ": "); - strcat(state->msg, msg); - return; -} - -#ifndef INT_MAX -/* portably return maximum value for an int (when limits.h presumed not - available) -- we need to do this to cover cases where 2's complement not - used, since C standard permits 1's complement and sign-bit representations, - otherwise we could just use ((unsigned)-1) >> 1 */ -unsigned ZLIB_INTERNAL gz_intmax() -{ - unsigned p, q; - - p = 1; - do { - q = p; - p <<= 1; - p++; - } while (p > q); - return q >> 1; -} -#endif diff --git a/sdk-modifications/libsrc/zlib/gzread.c b/sdk-modifications/libsrc/zlib/gzread.c deleted file mode 100755 index 4632e8f..0000000 --- a/sdk-modifications/libsrc/zlib/gzread.c +++ /dev/null @@ -1,584 +0,0 @@ -/* gzread.c -- zlib functions for reading gzip files - * Copyright (C) 2004, 2005, 2010, 2011 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#include "gzguts.h" - -/* Local functions */ -local int gz_load OF((gz_statep, unsigned char *, unsigned, unsigned *)); -local int gz_avail OF((gz_statep)); -local int gz_look OF((gz_statep)); -local int gz_decomp OF((gz_statep)); -local int gz_fetch OF((gz_statep)); -local int gz_skip OF((gz_statep, z_off64_t)); - -/* Use read() to load a buffer -- return -1 on error, otherwise 0. Read from - state->fd, and update state->eof, state->err, and state->msg as appropriate. - This function needs to loop on read(), since read() is not guaranteed to - read the number of bytes requested, depending on the type of descriptor. */ -local int gz_load(state, buf, len, have) - gz_statep state; - unsigned char *buf; - unsigned len; - unsigned *have; -{ - int ret; - - *have = 0; - do { - ret = read(state->fd, buf + *have, len - *have); - if (ret <= 0) - break; - *have += ret; - } while (*have < len); - if (ret < 0) { - gz_error(state, Z_ERRNO, "Load Error"); - return -1; - } - if (ret == 0) - state->eof = 1; - return 0; -} - -/* Load up input buffer and set eof flag if last data loaded -- return -1 on - error, 0 otherwise. Note that the eof flag is set when the end of the input - file is reached, even though there may be unused data in the buffer. Once - that data has been used, no more attempts will be made to read the file. - If strm->avail_in != 0, then the current data is moved to the beginning of - the input buffer, and then the remainder of the buffer is loaded with the - available data from the input file. */ -local int gz_avail(state) - gz_statep state; -{ - unsigned got; - z_streamp strm = &(state->strm); - - if (state->err != Z_OK && state->err != Z_BUF_ERROR) - return -1; - if (state->eof == 0) { - if (strm->avail_in) - memmove(state->in, strm->next_in, strm->avail_in); - if (gz_load(state, state->in + strm->avail_in, - state->size - strm->avail_in, &got) == -1) - return -1; - strm->avail_in += got; - strm->next_in = state->in; - } - return 0; -} - -/* Look for gzip header, set up for inflate or copy. state->x.have must be 0. - If this is the first time in, allocate required memory. state->how will be - left unchanged if there is no more input data available, will be set to COPY - if there is no gzip header and direct copying will be performed, or it will - be set to GZIP for decompression. If direct copying, then leftover input - data from the input buffer will be copied to the output buffer. In that - case, all further file reads will be directly to either the output buffer or - a user buffer. If decompressing, the inflate state will be initialized. - gz_look() will return 0 on success or -1 on failure. */ -local int gz_look(state) - gz_statep state; -{ - z_streamp strm = &(state->strm); - - /* allocate read buffers and inflate memory */ - if (state->size == 0) { - /* allocate buffers */ - state->in = malloc(state->want); - state->out = malloc(state->want << 1); - if (state->in == NULL || state->out == NULL) { - if (state->out != NULL) - free(state->out); - if (state->in != NULL) - free(state->in); - gz_error(state, Z_MEM_ERROR, "out of memory"); - return -1; - } - state->size = state->want; - - /* allocate inflate memory */ - state->strm.zalloc = Z_NULL; - state->strm.zfree = Z_NULL; - state->strm.opaque = Z_NULL; - state->strm.avail_in = 0; - state->strm.next_in = Z_NULL; - if (inflateInit2(&(state->strm), 15 + 16) != Z_OK) { /* gunzip */ - free(state->out); - free(state->in); - state->size = 0; - gz_error(state, Z_MEM_ERROR, "out of memory"); - return -1; - } - } - - /* get at least the magic bytes in the input buffer */ - if (strm->avail_in < 2) { - if (gz_avail(state) == -1) - return -1; - if (strm->avail_in == 0) - return 0; - } - - /* look for gzip magic bytes -- if there, do gzip decoding (note: there is - a logical dilemma here when considering the case of a partially written - gzip file, to wit, if a single 31 byte is written, then we cannot tell - whether this is a single-byte file, or just a partially written gzip - file -- for here we assume that if a gzip file is being written, then - the header will be written in a single operation, so that reading a - single byte is sufficient indication that it is not a gzip file) */ - if (strm->avail_in > 1 && - strm->next_in[0] == 31 && strm->next_in[1] == 139) { - inflateReset(strm); - state->how = GZIP; - state->direct = 0; - return 0; - } - - /* no gzip header -- if we were decoding gzip before, then this is trailing - garbage. Ignore the trailing garbage and finish. */ - if (state->direct == 0) { - strm->avail_in = 0; - state->eof = 1; - state->x.have = 0; - return 0; - } - - /* doing raw i/o, copy any leftover input to output -- this assumes that - the output buffer is larger than the input buffer, which also assures - space for gzungetc() */ - state->x.next = state->out; - if (strm->avail_in) { - memcpy(state->x.next, strm->next_in, strm->avail_in); - state->x.have = strm->avail_in; - strm->avail_in = 0; - } - state->how = COPY; - state->direct = 1; - return 0; -} - -/* Decompress from input to the provided next_out and avail_out in the state. - On return, state->x.have and state->x.next point to the just decompressed - data. If the gzip stream completes, state->how is reset to LOOK to look for - the next gzip stream or raw data, once state->x.have is depleted. Returns 0 - on success, -1 on failure. */ -local int gz_decomp(state) - gz_statep state; -{ - int ret = Z_OK; - unsigned had; - z_streamp strm = &(state->strm); - - /* fill output buffer up to end of deflate stream */ - had = strm->avail_out; - do { - /* get more input for inflate() */ - if (strm->avail_in == 0 && gz_avail(state) == -1) - return -1; - if (strm->avail_in == 0) { - gz_error(state, Z_BUF_ERROR, "unexpected end of file"); - break; - } - - /* decompress and handle errors */ - ret = inflate(strm, Z_NO_FLUSH); - if (ret == Z_STREAM_ERROR || ret == Z_NEED_DICT) { - gz_error(state, Z_STREAM_ERROR, - "internal error: inflate stream corrupt"); - return -1; - } - if (ret == Z_MEM_ERROR) { - gz_error(state, Z_MEM_ERROR, "out of memory"); - return -1; - } - if (ret == Z_DATA_ERROR) { /* deflate stream invalid */ - gz_error(state, Z_DATA_ERROR, - strm->msg == NULL ? "compressed data error" : strm->msg); - return -1; - } - } while (strm->avail_out && ret != Z_STREAM_END); - - /* update available output */ - state->x.have = had - strm->avail_out; - state->x.next = strm->next_out - state->x.have; - - /* if the gzip stream completed successfully, look for another */ - if (ret == Z_STREAM_END) - state->how = LOOK; - - /* good decompression */ - return 0; -} - -/* Fetch data and put it in the output buffer. Assumes state->x.have is 0. - Data is either copied from the input file or decompressed from the input - file depending on state->how. If state->how is LOOK, then a gzip header is - looked for to determine whether to copy or decompress. Returns -1 on error, - otherwise 0. gz_fetch() will leave state->how as COPY or GZIP unless the - end of the input file has been reached and all data has been processed. */ -local int gz_fetch(state) - gz_statep state; -{ - z_streamp strm = &(state->strm); - - do { - switch(state->how) { - case LOOK: /* -> LOOK, COPY (only if never GZIP), or GZIP */ - if (gz_look(state) == -1) - return -1; - if (state->how == LOOK) - return 0; - break; - case COPY: /* -> COPY */ - if (gz_load(state, state->out, state->size << 1, &(state->x.have)) - == -1) - return -1; - state->x.next = state->out; - return 0; - case GZIP: /* -> GZIP or LOOK (if end of gzip stream) */ - strm->avail_out = state->size << 1; - strm->next_out = state->out; - if (gz_decomp(state) == -1) - return -1; - } - } while (state->x.have == 0 && (!state->eof || strm->avail_in)); - return 0; -} - -/* Skip len uncompressed bytes of output. Return -1 on error, 0 on success. */ -local int gz_skip(state, len) - gz_statep state; - z_off64_t len; -{ - unsigned n; - - /* skip over len bytes or reach end-of-file, whichever comes first */ - while (len) - /* skip over whatever is in output buffer */ - if (state->x.have) { - n = GT_OFF(state->x.have) || (z_off64_t)state->x.have > len ? - (unsigned)len : state->x.have; - state->x.have -= n; - state->x.next += n; - state->x.pos += n; - len -= n; - } - - /* output buffer empty -- return if we're at the end of the input */ - else if (state->eof && state->strm.avail_in == 0) - break; - - /* need more data to skip -- load up output buffer */ - else { - /* get more output, looking for header if required */ - if (gz_fetch(state) == -1) - return -1; - } - return 0; -} - -/* -- see zlib.h -- */ -int ZEXPORT gzread(file, buf, len) - gzFile file; - voidp buf; - unsigned len; -{ - unsigned got, n; - gz_statep state; - z_streamp strm; - - /* get internal structure */ - if (file == NULL) - return -1; - state = (gz_statep)file; - strm = &(state->strm); - - /* check that we're reading and that there's no (serious) error */ - if (state->mode != GZ_READ || - (state->err != Z_OK && state->err != Z_BUF_ERROR)) - return -1; - - /* since an int is returned, make sure len fits in one, otherwise return - with an error (this avoids the flaw in the interface) */ - if ((int)len < 0) { - gz_error(state, Z_DATA_ERROR, "requested length does not fit in int"); - return -1; - } - - /* if len is zero, avoid unnecessary operations */ - if (len == 0) - return 0; - - /* process a skip request */ - if (state->seek) { - state->seek = 0; - if (gz_skip(state, state->skip) == -1) - return -1; - } - - /* get len bytes to buf, or less than len if at the end */ - got = 0; - do { - /* first just try copying data from the output buffer */ - if (state->x.have) { - n = state->x.have > len ? len : state->x.have; - memcpy(buf, state->x.next, n); - state->x.next += n; - state->x.have -= n; - } - - /* output buffer empty -- return if we're at the end of the input */ - else if (state->eof && strm->avail_in == 0) { - state->past = 1; /* tried to read past end */ - break; - } - - /* need output data -- for small len or new stream load up our output - buffer */ - else if (state->how == LOOK || len < (state->size << 1)) { - /* get more output, looking for header if required */ - if (gz_fetch(state) == -1) - return -1; - continue; /* no progress yet -- go back to memcpy() above */ - /* the copy above assures that we will leave with space in the - output buffer, allowing at least one gzungetc() to succeed */ - } - - /* large len -- read directly into user buffer */ - else if (state->how == COPY) { /* read directly */ - if (gz_load(state, buf, len, &n) == -1) - return -1; - } - - /* large len -- decompress directly into user buffer */ - else { /* state->how == GZIP */ - strm->avail_out = len; - strm->next_out = buf; - if (gz_decomp(state) == -1) - return -1; - n = state->x.have; - state->x.have = 0; - } - - /* update progress */ - len -= n; - buf = (char *)buf + n; - got += n; - state->x.pos += n; - } while (len); - - /* return number of bytes read into user buffer (will fit in int) */ - return (int)got; -} - -/* -- see zlib.h -- */ -int ZEXPORT gzgetc_(file) - gzFile file; -{ - int ret; - unsigned char buf[1]; - gz_statep state; - - /* get internal structure */ - if (file == NULL) - return -1; - state = (gz_statep)file; - - /* check that we're reading and that there's no (serious) error */ - if (state->mode != GZ_READ || - (state->err != Z_OK && state->err != Z_BUF_ERROR)) - return -1; - - /* try output buffer (no need to check for skip request) */ - if (state->x.have) { - state->x.have--; - state->x.pos++; - return *(state->x.next)++; - } - - /* nothing there -- try gzread() */ - ret = gzread(file, buf, 1); - return ret < 1 ? -1 : buf[0]; -} - -#undef gzgetc -int ZEXPORT gzgetc(file) -gzFile file; -{ - return gzgetc_(file); -} - -/* -- see zlib.h -- */ -int ZEXPORT gzungetc(c, file) - int c; - gzFile file; -{ - gz_statep state; - - /* get internal structure */ - if (file == NULL) - return -1; - state = (gz_statep)file; - - /* check that we're reading and that there's no (serious) error */ - if (state->mode != GZ_READ || - (state->err != Z_OK && state->err != Z_BUF_ERROR)) - return -1; - - /* process a skip request */ - if (state->seek) { - state->seek = 0; - if (gz_skip(state, state->skip) == -1) - return -1; - } - - /* can't push EOF */ - if (c < 0) - return -1; - - /* if output buffer empty, put byte at end (allows more pushing) */ - if (state->x.have == 0) { - state->x.have = 1; - state->x.next = state->out + (state->size << 1) - 1; - state->x.next[0] = c; - state->x.pos--; - state->past = 0; - return c; - } - - /* if no room, give up (must have already done a gzungetc()) */ - if (state->x.have == (state->size << 1)) { - gz_error(state, Z_DATA_ERROR, "out of room to push characters"); - return -1; - } - - /* slide output data if needed and insert byte before existing data */ - if (state->x.next == state->out) { - unsigned char *src = state->out + state->x.have; - unsigned char *dest = state->out + (state->size << 1); - while (src > state->out) - *--dest = *--src; - state->x.next = dest; - } - state->x.have++; - state->x.next--; - state->x.next[0] = c; - state->x.pos--; - state->past = 0; - return c; -} - -/* -- see zlib.h -- */ -char * ZEXPORT gzgets(file, buf, len) - gzFile file; - char *buf; - int len; -{ - unsigned left, n; - char *str; - unsigned char *eol; - gz_statep state; - - /* check parameters and get internal structure */ - if (file == NULL || buf == NULL || len < 1) - return NULL; - state = (gz_statep)file; - - /* check that we're reading and that there's no (serious) error */ - if (state->mode != GZ_READ || - (state->err != Z_OK && state->err != Z_BUF_ERROR)) - return NULL; - - /* process a skip request */ - if (state->seek) { - state->seek = 0; - if (gz_skip(state, state->skip) == -1) - return NULL; - } - - /* copy output bytes up to new line or len - 1, whichever comes first -- - append a terminating zero to the string (we don't check for a zero in - the contents, let the user worry about that) */ - str = buf; - left = (unsigned)len - 1; - if (left) do { - /* assure that something is in the output buffer */ - if (state->x.have == 0 && gz_fetch(state) == -1) - return NULL; /* error */ - if (state->x.have == 0) { /* end of file */ - state->past = 1; /* read past end */ - break; /* return what we have */ - } - - /* look for end-of-line in current output buffer */ - n = state->x.have > left ? left : state->x.have; - eol = (char*)memchr(state->x.next, '\n', n); - if (eol != NULL) - n = (unsigned)(eol - state->x.next) + 1; - - /* copy through end-of-line, or remainder if not found */ - memcpy(buf, state->x.next, n); - state->x.have -= n; - state->x.next += n; - state->x.pos += n; - left -= n; - buf += n; - } while (left && eol == NULL); - - /* return terminated string, or if nothing, end of file */ - if (buf == str) - return NULL; - buf[0] = 0; - return str; -} - -/* -- see zlib.h -- */ -int ZEXPORT gzdirect(file) - gzFile file; -{ - gz_statep state; - - /* get internal structure */ - if (file == NULL) - return 0; - state = (gz_statep)file; - - /* if the state is not known, but we can find out, then do so (this is - mainly for right after a gzopen() or gzdopen()) */ - if (state->mode == GZ_READ && state->how == LOOK && state->x.have == 0) - (void)gz_look(state); - - /* return 1 if transparent, 0 if processing a gzip stream */ - return state->direct; -} - -/* -- see zlib.h -- */ -int ZEXPORT gzclose_r(file) - gzFile file; -{ - int ret, err; - gz_statep state; - - /* get internal structure */ - if (file == NULL) - return Z_STREAM_ERROR; - state = (gz_statep)file; - - /* check that we're reading */ - if (state->mode != GZ_READ) - return Z_STREAM_ERROR; - - /* free memory and close file */ - if (state->size) { - inflateEnd(&(state->strm)); - free(state->out); - free(state->in); - } - err = state->err == Z_BUF_ERROR ? Z_BUF_ERROR : Z_OK; - gz_error(state, Z_OK, NULL); - free(state->path); - ret = close(state->fd); - free(state); - return ret ? Z_ERRNO : err; -} diff --git a/sdk-modifications/libsrc/zlib/gzwrite.c b/sdk-modifications/libsrc/zlib/gzwrite.c deleted file mode 100755 index c346a64..0000000 --- a/sdk-modifications/libsrc/zlib/gzwrite.c +++ /dev/null @@ -1,593 +0,0 @@ -/* gzwrite.c -- zlib functions for writing gzip files - * Copyright (C) 2004, 2005, 2010, 2011, 2012 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#include "gzguts.h" - -/* Local functions */ -local int gz_init OF((gz_statep)); -local int gz_comp OF((gz_statep, int)); -local int gz_zero OF((gz_statep, z_off64_t)); - -/* Initialize state for writing a gzip file. Mark initialization by setting - state->size to non-zero. Return -1 on failure or 0 on success. */ -local int gz_init(state) - gz_statep state; -{ - int ret; - z_streamp strm = &(state->strm); - - /* allocate input buffer */ - state->in = malloc(state->want); - if (state->in == NULL) { - gz_error(state, Z_MEM_ERROR, "out of memory"); - return -1; - } - - /* only need output buffer and deflate state if compressing */ - if (!state->direct) { - /* allocate output buffer */ - state->out = malloc(state->want); - if (state->out == NULL) { - free(state->in); - gz_error(state, Z_MEM_ERROR, "out of memory"); - return -1; - } - - /* allocate deflate memory, set up for gzip compression */ - strm->zalloc = Z_NULL; - strm->zfree = Z_NULL; - strm->opaque = Z_NULL; - ret = deflateInit2(strm, state->level, Z_DEFLATED, - MAX_WBITS + 16, DEF_MEM_LEVEL, state->strategy); - if (ret != Z_OK) { - free(state->out); - free(state->in); - gz_error(state, Z_MEM_ERROR, "out of memory"); - return -1; - } - } - - /* mark state as initialized */ - state->size = state->want; - - /* initialize write buffer if compressing */ - if (!state->direct) { - strm->avail_out = state->size; - strm->next_out = state->out; - state->x.next = strm->next_out; - } - return 0; -} - -/* Compress whatever is at avail_in and next_in and write to the output file. - Return -1 if there is an error writing to the output file, otherwise 0. - flush is assumed to be a valid deflate() flush value. If flush is Z_FINISH, - then the deflate() state is reset to start a new gzip stream. If gz->direct - is true, then simply write to the output file without compressing, and - ignore flush. */ -local int gz_comp(state, flush) - gz_statep state; - int flush; -{ - int ret, got; - unsigned have; - z_streamp strm = &(state->strm); - - /* allocate memory if this is the first time through */ - if (state->size == 0 && gz_init(state) == -1) - return -1; - - /* write directly if requested */ - if (state->direct) { - got = write(state->fd, strm->next_in, strm->avail_in); - if (got < 0 || (unsigned)got != strm->avail_in) { - gz_error(state, Z_ERRNO, "Write Error"); - return -1; - } - strm->avail_in = 0; - return 0; - } - - /* run deflate() on provided input until it produces no more output */ - ret = Z_OK; - do { - /* write out current buffer contents if full, or if flushing, but if - doing Z_FINISH then don't write until we get to Z_STREAM_END */ - if (strm->avail_out == 0 || (flush != Z_NO_FLUSH && - (flush != Z_FINISH || ret == Z_STREAM_END))) { - have = (unsigned)(strm->next_out - state->x.next); - if (have && ((got = write(state->fd, state->x.next, have)) < 0 || - (unsigned)got != have)) { - gz_error(state, Z_ERRNO, "Flush Error"); - return -1; - } - if (strm->avail_out == 0) { - strm->avail_out = state->size; - strm->next_out = state->out; - } - state->x.next = strm->next_out; - } - - /* compress */ - have = strm->avail_out; - ret = deflate(strm, flush); - if (ret == Z_STREAM_ERROR) { - gz_error(state, Z_STREAM_ERROR, - "internal error: deflate stream corrupt"); - return -1; - } - have -= strm->avail_out; - } while (have); - - /* if that completed a deflate stream, allow another to start */ - if (flush == Z_FINISH) - deflateReset(strm); - - /* all done, no errors */ - return 0; -} - -/* Compress len zeros to output. Return -1 on error, 0 on success. */ -local int gz_zero(state, len) - gz_statep state; - z_off64_t len; -{ - int first; - unsigned n; - z_streamp strm = &(state->strm); - - /* consume whatever's left in the input buffer */ - if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1) - return -1; - - /* compress len zeros (len guaranteed > 0) */ - first = 1; - while (len) { - n = GT_OFF(state->size) || (z_off64_t)state->size > len ? - (unsigned)len : state->size; - if (first) { - memset(state->in, 0, n); - first = 0; - } - strm->avail_in = n; - strm->next_in = state->in; - state->x.pos += n; - if (gz_comp(state, Z_NO_FLUSH) == -1) - return -1; - len -= n; - } - return 0; -} - -/* -- see zlib.h -- */ -int ZEXPORT gzwrite(file, buf, len) - gzFile file; - voidpc buf; - unsigned len; -{ - unsigned put = len; - unsigned n; - gz_statep state; - z_streamp strm; - - /* get internal structure */ - if (file == NULL) - return 0; - state = (gz_statep)file; - strm = &(state->strm); - - /* check that we're writing and that there's no error */ - if (state->mode != GZ_WRITE || state->err != Z_OK) - return 0; - - /* since an int is returned, make sure len fits in one, otherwise return - with an error (this avoids the flaw in the interface) */ - if ((int)len < 0) { - gz_error(state, Z_DATA_ERROR, "requested length does not fit in int"); - return 0; - } - - /* if len is zero, avoid unnecessary operations */ - if (len == 0) - return 0; - - /* allocate memory if this is the first time through */ - if (state->size == 0 && gz_init(state) == -1) - return 0; - - /* check for seek request */ - if (state->seek) { - state->seek = 0; - if (gz_zero(state, state->skip) == -1) - return 0; - } - - /* for small len, copy to input buffer, otherwise compress directly */ - if (len < state->size) { - /* copy to input buffer, compress when full */ - do { - if (strm->avail_in == 0) - strm->next_in = state->in; - n = state->size - strm->avail_in; - if (n > len) - n = len; - memcpy(strm->next_in + strm->avail_in, buf, n); - strm->avail_in += n; - state->x.pos += n; - buf = (char *)buf + n; - len -= n; - if (len && gz_comp(state, Z_NO_FLUSH) == -1) - return 0; - } while (len); - } - else { - /* consume whatever's left in the input buffer */ - if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1) - return 0; - - /* directly compress user buffer to file */ - strm->avail_in = len; - strm->next_in = (voidp)buf; - state->x.pos += len; - if (gz_comp(state, Z_NO_FLUSH) == -1) - return 0; - } - - /* input was all buffered or compressed (put will fit in int) */ - return (int)put; -} - -/* -- see zlib.h -- */ -int ZEXPORT gzputc(file, c) - gzFile file; - int c; -{ - unsigned char buf[1]; - gz_statep state; - z_streamp strm; - - /* get internal structure */ - if (file == NULL) - return -1; - state = (gz_statep)file; - strm = &(state->strm); - - /* check that we're writing and that there's no error */ - if (state->mode != GZ_WRITE || state->err != Z_OK) - return -1; - - /* check for seek request */ - if (state->seek) { - state->seek = 0; - if (gz_zero(state, state->skip) == -1) - return -1; - } - - /* try writing to input buffer for speed (state->size == 0 if buffer not - initialized) */ - if (strm->avail_in < state->size) { - if (strm->avail_in == 0) - strm->next_in = state->in; - strm->next_in[strm->avail_in++] = c; - state->x.pos++; - return c & 0xff; - } - - /* no room in buffer or not initialized, use gz_write() */ - buf[0] = c; - if (gzwrite(file, buf, 1) != 1) - return -1; - return c & 0xff; -} - -/* -- see zlib.h -- */ -int ZEXPORT gzputs(file, str) - gzFile file; - const char *str; -{ - int ret; - unsigned len; - - /* write string */ - len = (unsigned)strlen(str); - ret = gzwrite(file, str, len); - return ret == 0 && len != 0 ? -1 : ret; -} - -#if defined(STDC) || defined(Z_HAVE_STDARG_H) -#include <stdarg.h> - -/* -- see zlib.h -- */ -int ZEXPORTVA gzprintf (gzFile file, const char *format, ...) -{ - int size, len; - gz_statep state; - z_streamp strm; - va_list va; - - /* get internal structure */ - if (file == NULL) - return -1; - state = (gz_statep)file; - strm = &(state->strm); - - /* check that we're writing and that there's no error */ - if (state->mode != GZ_WRITE || state->err != Z_OK) - return 0; - - /* make sure we have some buffer space */ - if (state->size == 0 && gz_init(state) == -1) - return 0; - - /* check for seek request */ - if (state->seek) { - state->seek = 0; - if (gz_zero(state, state->skip) == -1) - return 0; - } - - /* consume whatever's left in the input buffer */ - if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1) - return 0; - - /* do the printf() into the input buffer, put length in len */ - size = (int)(state->size); - state->in[size - 1] = 0; - va_start(va, format); -#ifdef NO_vsnprintf -# ifdef HAS_vsprintf_void - (void)vsprintf(state->in, format, va); - va_end(va); - for (len = 0; len < size; len++) - if (state->in[len] == 0) break; -# else - len = vsprintf(state->in, format, va); - va_end(va); -# endif -#else -# ifdef HAS_vsnprintf_void - (void)vsnprintf(state->in, size, format, va); - va_end(va); - len = strlen(state->in); -# else - len = vsnprintf((char *)(state->in), size, format, va); - va_end(va); -# endif -#endif - - /* check that printf() results fit in buffer */ - if (len <= 0 || len >= (int)size || state->in[size - 1] != 0) - return 0; - - /* update buffer and position, defer compression until needed */ - strm->avail_in = (unsigned)len; - strm->next_in = state->in; - state->x.pos += len; - return len; -} - -#else /* !STDC && !Z_HAVE_STDARG_H */ - -/* -- see zlib.h -- */ -int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10, - a11, a12, a13, a14, a15, a16, a17, a18, a19, a20) - gzFile file; - const char *format; - int a1, a2, a3, a4, a5, a6, a7, a8, a9, a10, - a11, a12, a13, a14, a15, a16, a17, a18, a19, a20; -{ - int size, len; - gz_statep state; - z_streamp strm; - - /* get internal structure */ - if (file == NULL) - return -1; - state = (gz_statep)file; - strm = &(state->strm); - - /* check that can really pass pointer in ints */ - if (sizeof(int) != sizeof(void *)) - return 0; - - /* check that we're writing and that there's no error */ - if (state->mode != GZ_WRITE || state->err != Z_OK) - return 0; - - /* make sure we have some buffer space */ - if (state->size == 0 && gz_init(state) == -1) - return 0; - - /* check for seek request */ - if (state->seek) { - state->seek = 0; - if (gz_zero(state, state->skip) == -1) - return 0; - } - - /* consume whatever's left in the input buffer */ - if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1) - return 0; - - /* do the printf() into the input buffer, put length in len */ - size = (int)(state->size); - state->in[size - 1] = 0; -#ifdef NO_snprintf -# ifdef HAS_sprintf_void - sprintf(state->in, format, a1, a2, a3, a4, a5, a6, a7, a8, - a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20); - for (len = 0; len < size; len++) - if (state->in[len] == 0) break; -# else - len = sprintf(state->in, format, a1, a2, a3, a4, a5, a6, a7, a8, - a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20); -# endif -#else -# ifdef HAS_snprintf_void - snprintf(state->in, size, format, a1, a2, a3, a4, a5, a6, a7, a8, - a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20); - len = strlen(state->in); -# else - len = snprintf(state->in, size, format, a1, a2, a3, a4, a5, a6, a7, a8, - a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20); -# endif -#endif - - /* check that printf() results fit in buffer */ - if (len <= 0 || len >= (int)size || state->in[size - 1] != 0) - return 0; - - /* update buffer and position, defer compression until needed */ - strm->avail_in = (unsigned)len; - strm->next_in = state->in; - state->x.pos += len; - return len; -} - -#endif - -/* -- see zlib.h -- */ -int ZEXPORT gzflush(file, flush) - gzFile file; - int flush; -{ - gz_statep state; - - /* get internal structure */ - if (file == NULL) - return -1; - state = (gz_statep)file; - - /* check that we're writing and that there's no error */ - if (state->mode != GZ_WRITE || state->err != Z_OK) - return Z_STREAM_ERROR; - - /* check flush parameter */ - if (flush < 0 || flush > Z_FINISH) - return Z_STREAM_ERROR; - - /* check for seek request */ - if (state->seek) { - state->seek = 0; - if (gz_zero(state, state->skip) == -1) - return -1; - } - - /* compress remaining data with requested flush */ - gz_comp(state, flush); - return state->err; -} - -/* -- see zlib.h -- */ -int ZEXPORT gzsetparams(file, level, strategy) - gzFile file; - int level; - int strategy; -{ - gz_statep state; - z_streamp strm; - - /* get internal structure */ - if (file == NULL) - return Z_STREAM_ERROR; - state = (gz_statep)file; - strm = &(state->strm); - - /* check that we're writing and that there's no error */ - if (state->mode != GZ_WRITE || state->err != Z_OK) - return Z_STREAM_ERROR; - - /* if no change is requested, then do nothing */ - if (level == state->level && strategy == state->strategy) - return Z_OK; - - /* check for seek request */ - if (state->seek) { - state->seek = 0; - if (gz_zero(state, state->skip) == -1) - return -1; - } - - /* change compression parameters for subsequent input */ - if (state->size) { - /* flush previous input with previous parameters before changing */ - if (strm->avail_in && gz_comp(state, Z_PARTIAL_FLUSH) == -1) - return state->err; - deflateParams(strm, level, strategy); - } - state->level = level; - state->strategy = strategy; - return Z_OK; -} - -/* -- see zlib.h -- */ -int ZEXPORT gzclose_w(file) - gzFile file; -{ - int ret = Z_OK; - gz_statep state; - - /* get internal structure */ - if (file == NULL) - return Z_STREAM_ERROR; - state = (gz_statep)file; - - /* check that we're writing */ - if (state->mode != GZ_WRITE) - return Z_STREAM_ERROR; - - /* check for seek request */ - if (state->seek) { - state->seek = 0; - if (gz_zero(state, state->skip) == -1) - ret = state->err; - } - - /* flush, free memory, and close file */ - if (gz_comp(state, Z_FINISH) == -1) - ret = state->err; - if (!state->direct) { - (void)deflateEnd(&(state->strm)); - free(state->out); - } - free(state->in); - gz_error(state, Z_OK, NULL); - free(state->path); - if (close(state->fd) == -1) - ret = Z_ERRNO; - free(state); - return ret; -} - -/* used by zlibVersion() to get the vsnprintf story from the horse's mouth */ -unsigned long ZEXPORT gzflags() -{ - unsigned long flags = 0; -#if defined(STDC) || defined(Z_HAVE_STDARG_H) -# ifdef NO_vsnprintf - flags += 1L << 25; -# ifdef HAS_vsprintf_void - flags += 1L << 26; -# endif -# else -# ifdef HAS_vsnprintf_void - flags += 1L << 26; -# endif -# endif -#else - flags += 1L << 24; -# ifdef NO_snprintf - flags += 1L << 25; -# ifdef HAS_sprintf_void - flags += 1L << 26; -# endif -# else -# ifdef HAS_snprintf_void - flags += 1L << 26; -# endif -# endif -#endif - return flags; -} diff --git a/sdk-modifications/libsrc/zlib/infback.c b/sdk-modifications/libsrc/zlib/infback.c deleted file mode 100755 index 981aff1..0000000 --- a/sdk-modifications/libsrc/zlib/infback.c +++ /dev/null @@ -1,640 +0,0 @@ -/* infback.c -- inflate using a call-back interface - * Copyright (C) 1995-2011 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* - This code is largely copied from inflate.c. Normally either infback.o or - inflate.o would be linked into an application--not both. The interface - with inffast.c is retained so that optimized assembler-coded versions of - inflate_fast() can be used with either inflate.c or infback.c. - */ - -#include "zutil.h" -#include "inftrees.h" -#include "inflate.h" -#include "inffast.h" - -/* function prototypes */ -local void fixedtables OF((struct inflate_state FAR *state)); - -/* - strm provides memory allocation functions in zalloc and zfree, or - Z_NULL to use the library memory allocation functions. - - windowBits is in the range 8..15, and window is a user-supplied - window and output buffer that is 2**windowBits bytes. - */ -int ZEXPORT inflateBackInit_(strm, windowBits, window, version, stream_size) -z_streamp strm; -int windowBits; -unsigned char FAR *window; -const char *version; -int stream_size; -{ - struct inflate_state FAR *state; - - if (version == Z_NULL || version[0] != ZLIB_VERSION[0] || - stream_size != (int)(sizeof(z_stream))) - return Z_VERSION_ERROR; - if (strm == Z_NULL || window == Z_NULL || - windowBits < 8 || windowBits > 15) - return Z_STREAM_ERROR; - strm->msg = Z_NULL; /* in case we return an error */ - if (strm->zalloc == (alloc_func)0) { -#ifdef Z_SOLO - return Z_STREAM_ERROR; -#else - strm->zalloc = zcalloc; - strm->opaque = (voidpf)0; -#endif - } - if (strm->zfree == (free_func)0) -#ifdef Z_SOLO - return Z_STREAM_ERROR; -#else - strm->zfree = zcfree; -#endif - state = (struct inflate_state FAR *)ZALLOC(strm, 1, - sizeof(struct inflate_state)); - if (state == Z_NULL) return Z_MEM_ERROR; - Tracev((stderr, "inflate: allocated\n")); - strm->state = (struct internal_state FAR *)state; - state->dmax = 32768U; - state->wbits = windowBits; - state->wsize = 1U << windowBits; - state->window = window; - state->wnext = 0; - state->whave = 0; - return Z_OK; -} - -/* - Return state with length and distance decoding tables and index sizes set to - fixed code decoding. Normally this returns fixed tables from inffixed.h. - If BUILDFIXED is defined, then instead this routine builds the tables the - first time it's called, and returns those tables the first time and - thereafter. This reduces the size of the code by about 2K bytes, in - exchange for a little execution time. However, BUILDFIXED should not be - used for threaded applications, since the rewriting of the tables and virgin - may not be thread-safe. - */ -local void fixedtables(state) -struct inflate_state FAR *state; -{ -#ifdef BUILDFIXED - static int virgin = 1; - static code *lenfix, *distfix; - static code fixed[544]; - - /* build fixed huffman tables if first call (may not be thread safe) */ - if (virgin) { - unsigned sym, bits; - static code *next; - - /* literal/length table */ - sym = 0; - while (sym < 144) state->lens[sym++] = 8; - while (sym < 256) state->lens[sym++] = 9; - while (sym < 280) state->lens[sym++] = 7; - while (sym < 288) state->lens[sym++] = 8; - next = fixed; - lenfix = next; - bits = 9; - inflate_table(LENS, state->lens, 288, &(next), &(bits), state->work); - - /* distance table */ - sym = 0; - while (sym < 32) state->lens[sym++] = 5; - distfix = next; - bits = 5; - inflate_table(DISTS, state->lens, 32, &(next), &(bits), state->work); - - /* do this just once */ - virgin = 0; - } -#else /* !BUILDFIXED */ -# include "inffixed.h" -#endif /* BUILDFIXED */ - state->lencode = lenfix; - state->lenbits = 9; - state->distcode = distfix; - state->distbits = 5; -} - -/* Macros for inflateBack(): */ - -/* Load returned state from inflate_fast() */ -#define LOAD() \ - do { \ - put = strm->next_out; \ - left = strm->avail_out; \ - next = strm->next_in; \ - have = strm->avail_in; \ - hold = state->hold; \ - bits = state->bits; \ - } while (0) - -/* Set state from registers for inflate_fast() */ -#define RESTORE() \ - do { \ - strm->next_out = put; \ - strm->avail_out = left; \ - strm->next_in = next; \ - strm->avail_in = have; \ - state->hold = hold; \ - state->bits = bits; \ - } while (0) - -/* Clear the input bit accumulator */ -#define INITBITS() \ - do { \ - hold = 0; \ - bits = 0; \ - } while (0) - -/* Assure that some input is available. If input is requested, but denied, - then return a Z_BUF_ERROR from inflateBack(). */ -#define PULL() \ - do { \ - if (have == 0) { \ - have = in(in_desc, &next); \ - if (have == 0) { \ - next = Z_NULL; \ - ret = Z_BUF_ERROR; \ - goto inf_leave; \ - } \ - } \ - } while (0) - -/* Get a byte of input into the bit accumulator, or return from inflateBack() - with an error if there is no input available. */ -#define PULLBYTE() \ - do { \ - PULL(); \ - have--; \ - hold += (unsigned long)(*next++) << bits; \ - bits += 8; \ - } while (0) - -/* Assure that there are at least n bits in the bit accumulator. If there is - not enough available input to do that, then return from inflateBack() with - an error. */ -#define NEEDBITS(n) \ - do { \ - while (bits < (unsigned)(n)) \ - PULLBYTE(); \ - } while (0) - -/* Return the low n bits of the bit accumulator (n < 16) */ -#define BITS(n) \ - ((unsigned)hold & ((1U << (n)) - 1)) - -/* Remove n bits from the bit accumulator */ -#define DROPBITS(n) \ - do { \ - hold >>= (n); \ - bits -= (unsigned)(n); \ - } while (0) - -/* Remove zero to seven bits as needed to go to a byte boundary */ -#define BYTEBITS() \ - do { \ - hold >>= bits & 7; \ - bits -= bits & 7; \ - } while (0) - -/* Assure that some output space is available, by writing out the window - if it's full. If the write fails, return from inflateBack() with a - Z_BUF_ERROR. */ -#define ROOM() \ - do { \ - if (left == 0) { \ - put = state->window; \ - left = state->wsize; \ - state->whave = left; \ - if (out(out_desc, put, left)) { \ - ret = Z_BUF_ERROR; \ - goto inf_leave; \ - } \ - } \ - } while (0) - -/* - strm provides the memory allocation functions and window buffer on input, - and provides information on the unused input on return. For Z_DATA_ERROR - returns, strm will also provide an error message. - - in() and out() are the call-back input and output functions. When - inflateBack() needs more input, it calls in(). When inflateBack() has - filled the window with output, or when it completes with data in the - window, it calls out() to write out the data. The application must not - change the provided input until in() is called again or inflateBack() - returns. The application must not change the window/output buffer until - inflateBack() returns. - - in() and out() are called with a descriptor parameter provided in the - inflateBack() call. This parameter can be a structure that provides the - information required to do the read or write, as well as accumulated - information on the input and output such as totals and check values. - - in() should return zero on failure. out() should return non-zero on - failure. If either in() or out() fails, than inflateBack() returns a - Z_BUF_ERROR. strm->next_in can be checked for Z_NULL to see whether it - was in() or out() that caused in the error. Otherwise, inflateBack() - returns Z_STREAM_END on success, Z_DATA_ERROR for an deflate format - error, or Z_MEM_ERROR if it could not allocate memory for the state. - inflateBack() can also return Z_STREAM_ERROR if the input parameters - are not correct, i.e. strm is Z_NULL or the state was not initialized. - */ -int ZEXPORT inflateBack(strm, in, in_desc, out, out_desc) -z_streamp strm; -in_func in; -void FAR *in_desc; -out_func out; -void FAR *out_desc; -{ - struct inflate_state FAR *state; - unsigned char FAR *next; /* next input */ - unsigned char FAR *put; /* next output */ - unsigned have, left; /* available input and output */ - unsigned long hold; /* bit buffer */ - unsigned bits; /* bits in bit buffer */ - unsigned copy; /* number of stored or match bytes to copy */ - unsigned char FAR *from; /* where to copy match bytes from */ - code here; /* current decoding table entry */ - code last; /* parent table entry */ - unsigned len; /* length to copy for repeats, bits to drop */ - int ret; /* return code */ - static const unsigned short order[19] = /* permutation of code lengths */ - {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; - - /* Check that the strm exists and that the state was initialized */ - if (strm == Z_NULL || strm->state == Z_NULL) - return Z_STREAM_ERROR; - state = (struct inflate_state FAR *)strm->state; - - /* Reset the state */ - strm->msg = Z_NULL; - state->mode = TYPE; - state->last = 0; - state->whave = 0; - next = strm->next_in; - have = next != Z_NULL ? strm->avail_in : 0; - hold = 0; - bits = 0; - put = state->window; - left = state->wsize; - - /* Inflate until end of block marked as last */ - for (;;) - switch (state->mode) { - case TYPE: - /* determine and dispatch block type */ - if (state->last) { - BYTEBITS(); - state->mode = DONE; - break; - } - NEEDBITS(3); - state->last = BITS(1); - DROPBITS(1); - switch (BITS(2)) { - case 0: /* stored block */ - Tracev((stderr, "inflate: stored block%s\n", - state->last ? " (last)" : "")); - state->mode = STORED; - break; - case 1: /* fixed block */ - fixedtables(state); - Tracev((stderr, "inflate: fixed codes block%s\n", - state->last ? " (last)" : "")); - state->mode = LEN; /* decode codes */ - break; - case 2: /* dynamic block */ - Tracev((stderr, "inflate: dynamic codes block%s\n", - state->last ? " (last)" : "")); - state->mode = TABLE; - break; - case 3: - strm->msg = (char *)"invalid block type"; - state->mode = BAD; - } - DROPBITS(2); - break; - - case STORED: - /* get and verify stored block length */ - BYTEBITS(); /* go to byte boundary */ - NEEDBITS(32); - if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) { - strm->msg = (char *)"invalid stored block lengths"; - state->mode = BAD; - break; - } - state->length = (unsigned)hold & 0xffff; - Tracev((stderr, "inflate: stored length %u\n", - state->length)); - INITBITS(); - - /* copy stored block from input to output */ - while (state->length != 0) { - copy = state->length; - PULL(); - ROOM(); - if (copy > have) copy = have; - if (copy > left) copy = left; - zmemcpy(put, next, copy); - have -= copy; - next += copy; - left -= copy; - put += copy; - state->length -= copy; - } - Tracev((stderr, "inflate: stored end\n")); - state->mode = TYPE; - break; - - case TABLE: - /* get dynamic table entries descriptor */ - NEEDBITS(14); - state->nlen = BITS(5) + 257; - DROPBITS(5); - state->ndist = BITS(5) + 1; - DROPBITS(5); - state->ncode = BITS(4) + 4; - DROPBITS(4); -#ifndef PKZIP_BUG_WORKAROUND - if (state->nlen > 286 || state->ndist > 30) { - strm->msg = (char *)"too many length or distance symbols"; - state->mode = BAD; - break; - } -#endif - Tracev((stderr, "inflate: table sizes ok\n")); - - /* get code length code lengths (not a typo) */ - state->have = 0; - while (state->have < state->ncode) { - NEEDBITS(3); - state->lens[order[state->have++]] = (unsigned short)BITS(3); - DROPBITS(3); - } - while (state->have < 19) - state->lens[order[state->have++]] = 0; - state->next = state->codes; - state->lencode = (code const FAR *)(state->next); - state->lenbits = 7; - ret = inflate_table(CODES, state->lens, 19, &(state->next), - &(state->lenbits), state->work); - if (ret) { - strm->msg = (char *)"invalid code lengths set"; - state->mode = BAD; - break; - } - Tracev((stderr, "inflate: code lengths ok\n")); - - /* get length and distance code code lengths */ - state->have = 0; - while (state->have < state->nlen + state->ndist) { - for (;;) { - here = state->lencode[BITS(state->lenbits)]; - if ((unsigned)(here.bits) <= bits) break; - PULLBYTE(); - } - if (here.val < 16) { - DROPBITS(here.bits); - state->lens[state->have++] = here.val; - } - else { - if (here.val == 16) { - NEEDBITS(here.bits + 2); - DROPBITS(here.bits); - if (state->have == 0) { - strm->msg = (char *)"invalid bit length repeat"; - state->mode = BAD; - break; - } - len = (unsigned)(state->lens[state->have - 1]); - copy = 3 + BITS(2); - DROPBITS(2); - } - else if (here.val == 17) { - NEEDBITS(here.bits + 3); - DROPBITS(here.bits); - len = 0; - copy = 3 + BITS(3); - DROPBITS(3); - } - else { - NEEDBITS(here.bits + 7); - DROPBITS(here.bits); - len = 0; - copy = 11 + BITS(7); - DROPBITS(7); - } - if (state->have + copy > state->nlen + state->ndist) { - strm->msg = (char *)"invalid bit length repeat"; - state->mode = BAD; - break; - } - while (copy--) - state->lens[state->have++] = (unsigned short)len; - } - } - - /* handle error breaks in while */ - if (state->mode == BAD) break; - - /* check for end-of-block code (better have one) */ - if (state->lens[256] == 0) { - strm->msg = (char *)"invalid code -- missing end-of-block"; - state->mode = BAD; - break; - } - - /* build code tables -- note: do not change the lenbits or distbits - values here (9 and 6) without reading the comments in inftrees.h - concerning the ENOUGH constants, which depend on those values */ - state->next = state->codes; - state->lencode = (code const FAR *)(state->next); - state->lenbits = 9; - ret = inflate_table(LENS, state->lens, state->nlen, &(state->next), - &(state->lenbits), state->work); - if (ret) { - strm->msg = (char *)"invalid literal/lengths set"; - state->mode = BAD; - break; - } - state->distcode = (code const FAR *)(state->next); - state->distbits = 6; - ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist, - &(state->next), &(state->distbits), state->work); - if (ret) { - strm->msg = (char *)"invalid distances set"; - state->mode = BAD; - break; - } - Tracev((stderr, "inflate: codes ok\n")); - state->mode = LEN; - - case LEN: - /* use inflate_fast() if we have enough input and output */ - if (have >= 6 && left >= 258) { - RESTORE(); - if (state->whave < state->wsize) - state->whave = state->wsize - left; - inflate_fast(strm, state->wsize); - LOAD(); - break; - } - - /* get a literal, length, or end-of-block code */ - for (;;) { - here = state->lencode[BITS(state->lenbits)]; - if ((unsigned)(here.bits) <= bits) break; - PULLBYTE(); - } - if (here.op && (here.op & 0xf0) == 0) { - last = here; - for (;;) { - here = state->lencode[last.val + - (BITS(last.bits + last.op) >> last.bits)]; - if ((unsigned)(last.bits + here.bits) <= bits) break; - PULLBYTE(); - } - DROPBITS(last.bits); - } - DROPBITS(here.bits); - state->length = (unsigned)here.val; - - /* process literal */ - if (here.op == 0) { - Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ? - "inflate: literal '%c'\n" : - "inflate: literal 0x%02x\n", here.val)); - ROOM(); - *put++ = (unsigned char)(state->length); - left--; - state->mode = LEN; - break; - } - - /* process end of block */ - if (here.op & 32) { - Tracevv((stderr, "inflate: end of block\n")); - state->mode = TYPE; - break; - } - - /* invalid code */ - if (here.op & 64) { - strm->msg = (char *)"invalid literal/length code"; - state->mode = BAD; - break; - } - - /* length code -- get extra bits, if any */ - state->extra = (unsigned)(here.op) & 15; - if (state->extra != 0) { - NEEDBITS(state->extra); - state->length += BITS(state->extra); - DROPBITS(state->extra); - } - Tracevv((stderr, "inflate: length %u\n", state->length)); - - /* get distance code */ - for (;;) { - here = state->distcode[BITS(state->distbits)]; - if ((unsigned)(here.bits) <= bits) break; - PULLBYTE(); - } - if ((here.op & 0xf0) == 0) { - last = here; - for (;;) { - here = state->distcode[last.val + - (BITS(last.bits + last.op) >> last.bits)]; - if ((unsigned)(last.bits + here.bits) <= bits) break; - PULLBYTE(); - } - DROPBITS(last.bits); - } - DROPBITS(here.bits); - if (here.op & 64) { - strm->msg = (char *)"invalid distance code"; - state->mode = BAD; - break; - } - state->offset = (unsigned)here.val; - - /* get distance extra bits, if any */ - state->extra = (unsigned)(here.op) & 15; - if (state->extra != 0) { - NEEDBITS(state->extra); - state->offset += BITS(state->extra); - DROPBITS(state->extra); - } - if (state->offset > state->wsize - (state->whave < state->wsize ? - left : 0)) { - strm->msg = (char *)"invalid distance too far back"; - state->mode = BAD; - break; - } - Tracevv((stderr, "inflate: distance %u\n", state->offset)); - - /* copy match from window to output */ - do { - ROOM(); - copy = state->wsize - state->offset; - if (copy < left) { - from = put + copy; - copy = left - copy; - } - else { - from = put - state->offset; - copy = left; - } - if (copy > state->length) copy = state->length; - state->length -= copy; - left -= copy; - do { - *put++ = *from++; - } while (--copy); - } while (state->length != 0); - break; - - case DONE: - /* inflate stream terminated properly -- write leftover output */ - ret = Z_STREAM_END; - if (left < state->wsize) { - if (out(out_desc, state->window, state->wsize - left)) - ret = Z_BUF_ERROR; - } - goto inf_leave; - - case BAD: - ret = Z_DATA_ERROR; - goto inf_leave; - - default: /* can't happen, but makes compilers happy */ - ret = Z_STREAM_ERROR; - goto inf_leave; - } - - /* Return unused input */ - inf_leave: - strm->next_in = next; - strm->avail_in = have; - return ret; -} - -int ZEXPORT inflateBackEnd(strm) -z_streamp strm; -{ - if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0) - return Z_STREAM_ERROR; - ZFREE(strm, strm->state); - strm->state = Z_NULL; - Tracev((stderr, "inflate: end\n")); - return Z_OK; -} diff --git a/sdk-modifications/libsrc/zlib/inffast.c b/sdk-modifications/libsrc/zlib/inffast.c deleted file mode 100755 index 2f1d60b..0000000 --- a/sdk-modifications/libsrc/zlib/inffast.c +++ /dev/null @@ -1,340 +0,0 @@ -/* inffast.c -- fast decoding - * Copyright (C) 1995-2008, 2010 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#include "zutil.h" -#include "inftrees.h" -#include "inflate.h" -#include "inffast.h" - -#ifndef ASMINF - -/* Allow machine dependent optimization for post-increment or pre-increment. - Based on testing to date, - Pre-increment preferred for: - - PowerPC G3 (Adler) - - MIPS R5000 (Randers-Pehrson) - Post-increment preferred for: - - none - No measurable difference: - - Pentium III (Anderson) - - M68060 (Nikl) - */ -#ifdef POSTINC -# define OFF 0 -# define PUP(a) *(a)++ -#else -# define OFF 1 -# define PUP(a) *++(a) -#endif - -/* - Decode literal, length, and distance codes and write out the resulting - literal and match bytes until either not enough input or output is - available, an end-of-block is encountered, or a data error is encountered. - When large enough input and output buffers are supplied to inflate(), for - example, a 16K input buffer and a 64K output buffer, more than 95% of the - inflate execution time is spent in this routine. - - Entry assumptions: - - state->mode == LEN - strm->avail_in >= 6 - strm->avail_out >= 258 - start >= strm->avail_out - state->bits < 8 - - On return, state->mode is one of: - - LEN -- ran out of enough output space or enough available input - TYPE -- reached end of block code, inflate() to interpret next block - BAD -- error in block data - - Notes: - - - The maximum input bits used by a length/distance pair is 15 bits for the - length code, 5 bits for the length extra, 15 bits for the distance code, - and 13 bits for the distance extra. This totals 48 bits, or six bytes. - Therefore if strm->avail_in >= 6, then there is enough input to avoid - checking for available input while decoding. - - - The maximum bytes that a single length/distance pair can output is 258 - bytes, which is the maximum length that can be coded. inflate_fast() - requires strm->avail_out >= 258 for each loop to avoid checking for - output space. - */ -void ZLIB_INTERNAL inflate_fast(strm, start) -z_streamp strm; -unsigned start; /* inflate()'s starting value for strm->avail_out */ -{ - struct inflate_state FAR *state; - unsigned char FAR *in; /* local strm->next_in */ - unsigned char FAR *last; /* while in < last, enough input available */ - unsigned char FAR *out; /* local strm->next_out */ - unsigned char FAR *beg; /* inflate()'s initial strm->next_out */ - unsigned char FAR *end; /* while out < end, enough space available */ -#ifdef INFLATE_STRICT - unsigned dmax; /* maximum distance from zlib header */ -#endif - unsigned wsize; /* window size or zero if not using window */ - unsigned whave; /* valid bytes in the window */ - unsigned wnext; /* window write index */ - unsigned char FAR *window; /* allocated sliding window, if wsize != 0 */ - unsigned long hold; /* local strm->hold */ - unsigned bits; /* local strm->bits */ - code const FAR *lcode; /* local strm->lencode */ - code const FAR *dcode; /* local strm->distcode */ - unsigned lmask; /* mask for first level of length codes */ - unsigned dmask; /* mask for first level of distance codes */ - code here; /* retrieved table entry */ - unsigned op; /* code bits, operation, extra bits, or */ - /* window position, window bytes to copy */ - unsigned len; /* match length, unused bytes */ - unsigned dist; /* match distance */ - unsigned char FAR *from; /* where to copy match from */ - - /* copy state to local variables */ - state = (struct inflate_state FAR *)strm->state; - in = strm->next_in - OFF; - last = in + (strm->avail_in - 5); - out = strm->next_out - OFF; - beg = out - (start - strm->avail_out); - end = out + (strm->avail_out - 257); -#ifdef INFLATE_STRICT - dmax = state->dmax; -#endif - wsize = state->wsize; - whave = state->whave; - wnext = state->wnext; - window = state->window; - hold = state->hold; - bits = state->bits; - lcode = state->lencode; - dcode = state->distcode; - lmask = (1U << state->lenbits) - 1; - dmask = (1U << state->distbits) - 1; - - /* decode literals and length/distances until end-of-block or not enough - input data or output space */ - do { - if (bits < 15) { - hold += (unsigned long)(PUP(in)) << bits; - bits += 8; - hold += (unsigned long)(PUP(in)) << bits; - bits += 8; - } - here = lcode[hold & lmask]; - dolen: - op = (unsigned)(here.bits); - hold >>= op; - bits -= op; - op = (unsigned)(here.op); - if (op == 0) { /* literal */ - Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ? - "inflate: literal '%c'\n" : - "inflate: literal 0x%02x\n", here.val)); - PUP(out) = (unsigned char)(here.val); - } - else if (op & 16) { /* length base */ - len = (unsigned)(here.val); - op &= 15; /* number of extra bits */ - if (op) { - if (bits < op) { - hold += (unsigned long)(PUP(in)) << bits; - bits += 8; - } - len += (unsigned)hold & ((1U << op) - 1); - hold >>= op; - bits -= op; - } - Tracevv((stderr, "inflate: length %u\n", len)); - if (bits < 15) { - hold += (unsigned long)(PUP(in)) << bits; - bits += 8; - hold += (unsigned long)(PUP(in)) << bits; - bits += 8; - } - here = dcode[hold & dmask]; - dodist: - op = (unsigned)(here.bits); - hold >>= op; - bits -= op; - op = (unsigned)(here.op); - if (op & 16) { /* distance base */ - dist = (unsigned)(here.val); - op &= 15; /* number of extra bits */ - if (bits < op) { - hold += (unsigned long)(PUP(in)) << bits; - bits += 8; - if (bits < op) { - hold += (unsigned long)(PUP(in)) << bits; - bits += 8; - } - } - dist += (unsigned)hold & ((1U << op) - 1); -#ifdef INFLATE_STRICT - if (dist > dmax) { - strm->msg = (char *)"invalid distance too far back"; - state->mode = BAD; - break; - } -#endif - hold >>= op; - bits -= op; - Tracevv((stderr, "inflate: distance %u\n", dist)); - op = (unsigned)(out - beg); /* max distance in output */ - if (dist > op) { /* see if copy from window */ - op = dist - op; /* distance back in window */ - if (op > whave) { - if (state->sane) { - strm->msg = - (char *)"invalid distance too far back"; - state->mode = BAD; - break; - } -#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR - if (len <= op - whave) { - do { - PUP(out) = 0; - } while (--len); - continue; - } - len -= op - whave; - do { - PUP(out) = 0; - } while (--op > whave); - if (op == 0) { - from = out - dist; - do { - PUP(out) = PUP(from); - } while (--len); - continue; - } -#endif - } - from = window - OFF; - if (wnext == 0) { /* very common case */ - from += wsize - op; - if (op < len) { /* some from window */ - len -= op; - do { - PUP(out) = PUP(from); - } while (--op); - from = out - dist; /* rest from output */ - } - } - else if (wnext < op) { /* wrap around window */ - from += wsize + wnext - op; - op -= wnext; - if (op < len) { /* some from end of window */ - len -= op; - do { - PUP(out) = PUP(from); - } while (--op); - from = window - OFF; - if (wnext < len) { /* some from start of window */ - op = wnext; - len -= op; - do { - PUP(out) = PUP(from); - } while (--op); - from = out - dist; /* rest from output */ - } - } - } - else { /* contiguous in window */ - from += wnext - op; - if (op < len) { /* some from window */ - len -= op; - do { - PUP(out) = PUP(from); - } while (--op); - from = out - dist; /* rest from output */ - } - } - while (len > 2) { - PUP(out) = PUP(from); - PUP(out) = PUP(from); - PUP(out) = PUP(from); - len -= 3; - } - if (len) { - PUP(out) = PUP(from); - if (len > 1) - PUP(out) = PUP(from); - } - } - else { - from = out - dist; /* copy direct from output */ - do { /* minimum length is three */ - PUP(out) = PUP(from); - PUP(out) = PUP(from); - PUP(out) = PUP(from); - len -= 3; - } while (len > 2); - if (len) { - PUP(out) = PUP(from); - if (len > 1) - PUP(out) = PUP(from); - } - } - } - else if ((op & 64) == 0) { /* 2nd level distance code */ - here = dcode[here.val + (hold & ((1U << op) - 1))]; - goto dodist; - } - else { - strm->msg = (char *)"invalid distance code"; - state->mode = BAD; - break; - } - } - else if ((op & 64) == 0) { /* 2nd level length code */ - here = lcode[here.val + (hold & ((1U << op) - 1))]; - goto dolen; - } - else if (op & 32) { /* end-of-block */ - Tracevv((stderr, "inflate: end of block\n")); - state->mode = TYPE; - break; - } - else { - strm->msg = (char *)"invalid literal/length code"; - state->mode = BAD; - break; - } - } while (in < last && out < end); - - /* return unused bytes (on entry, bits < 8, so in won't go too far back) */ - len = bits >> 3; - in -= len; - bits -= len << 3; - hold &= (1U << bits) - 1; - - /* update state and return */ - strm->next_in = in + OFF; - strm->next_out = out + OFF; - strm->avail_in = (unsigned)(in < last ? 5 + (last - in) : 5 - (in - last)); - strm->avail_out = (unsigned)(out < end ? - 257 + (end - out) : 257 - (out - end)); - state->hold = hold; - state->bits = bits; - return; -} - -/* - inflate_fast() speedups that turned out slower (on a PowerPC G3 750CXe): - - Using bit fields for code structure - - Different op definition to avoid & for extra bits (do & for table bits) - - Three separate decoding do-loops for direct, window, and wnext == 0 - - Special case for distance > 1 copies to do overlapped load and store copy - - Explicit branch predictions (based on measured branch probabilities) - - Deferring match copy and interspersed it with decoding subsequent codes - - Swapping literal/length else - - Swapping window/direct else - - Larger unrolled copy loops (three is about right) - - Moving len -= 3 statement into middle of loop - */ - -#endif /* !ASMINF */ diff --git a/sdk-modifications/libsrc/zlib/inffast.h b/sdk-modifications/libsrc/zlib/inffast.h deleted file mode 100755 index e5c1aa4..0000000 --- a/sdk-modifications/libsrc/zlib/inffast.h +++ /dev/null @@ -1,11 +0,0 @@ -/* inffast.h -- header to use inffast.c - * Copyright (C) 1995-2003, 2010 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -void ZLIB_INTERNAL inflate_fast OF((z_streamp strm, unsigned start)); diff --git a/sdk-modifications/libsrc/zlib/inffixed.h b/sdk-modifications/libsrc/zlib/inffixed.h deleted file mode 100755 index d628327..0000000 --- a/sdk-modifications/libsrc/zlib/inffixed.h +++ /dev/null @@ -1,94 +0,0 @@ - /* inffixed.h -- table for decoding fixed codes - * Generated automatically by makefixed(). - */ - - /* WARNING: this file should *not* be used by applications. - It is part of the implementation of this library and is - subject to change. Applications should only use zlib.h. - */ - - static const code lenfix[512] = { - {96,7,0},{0,8,80},{0,8,16},{20,8,115},{18,7,31},{0,8,112},{0,8,48}, - {0,9,192},{16,7,10},{0,8,96},{0,8,32},{0,9,160},{0,8,0},{0,8,128}, - {0,8,64},{0,9,224},{16,7,6},{0,8,88},{0,8,24},{0,9,144},{19,7,59}, - {0,8,120},{0,8,56},{0,9,208},{17,7,17},{0,8,104},{0,8,40},{0,9,176}, - {0,8,8},{0,8,136},{0,8,72},{0,9,240},{16,7,4},{0,8,84},{0,8,20}, - {21,8,227},{19,7,43},{0,8,116},{0,8,52},{0,9,200},{17,7,13},{0,8,100}, - {0,8,36},{0,9,168},{0,8,4},{0,8,132},{0,8,68},{0,9,232},{16,7,8}, - {0,8,92},{0,8,28},{0,9,152},{20,7,83},{0,8,124},{0,8,60},{0,9,216}, - {18,7,23},{0,8,108},{0,8,44},{0,9,184},{0,8,12},{0,8,140},{0,8,76}, - {0,9,248},{16,7,3},{0,8,82},{0,8,18},{21,8,163},{19,7,35},{0,8,114}, - {0,8,50},{0,9,196},{17,7,11},{0,8,98},{0,8,34},{0,9,164},{0,8,2}, - {0,8,130},{0,8,66},{0,9,228},{16,7,7},{0,8,90},{0,8,26},{0,9,148}, - {20,7,67},{0,8,122},{0,8,58},{0,9,212},{18,7,19},{0,8,106},{0,8,42}, - {0,9,180},{0,8,10},{0,8,138},{0,8,74},{0,9,244},{16,7,5},{0,8,86}, - {0,8,22},{64,8,0},{19,7,51},{0,8,118},{0,8,54},{0,9,204},{17,7,15}, - {0,8,102},{0,8,38},{0,9,172},{0,8,6},{0,8,134},{0,8,70},{0,9,236}, - {16,7,9},{0,8,94},{0,8,30},{0,9,156},{20,7,99},{0,8,126},{0,8,62}, - {0,9,220},{18,7,27},{0,8,110},{0,8,46},{0,9,188},{0,8,14},{0,8,142}, - {0,8,78},{0,9,252},{96,7,0},{0,8,81},{0,8,17},{21,8,131},{18,7,31}, - {0,8,113},{0,8,49},{0,9,194},{16,7,10},{0,8,97},{0,8,33},{0,9,162}, - {0,8,1},{0,8,129},{0,8,65},{0,9,226},{16,7,6},{0,8,89},{0,8,25}, - {0,9,146},{19,7,59},{0,8,121},{0,8,57},{0,9,210},{17,7,17},{0,8,105}, - {0,8,41},{0,9,178},{0,8,9},{0,8,137},{0,8,73},{0,9,242},{16,7,4}, - {0,8,85},{0,8,21},{16,8,258},{19,7,43},{0,8,117},{0,8,53},{0,9,202}, - {17,7,13},{0,8,101},{0,8,37},{0,9,170},{0,8,5},{0,8,133},{0,8,69}, - {0,9,234},{16,7,8},{0,8,93},{0,8,29},{0,9,154},{20,7,83},{0,8,125}, - {0,8,61},{0,9,218},{18,7,23},{0,8,109},{0,8,45},{0,9,186},{0,8,13}, - {0,8,141},{0,8,77},{0,9,250},{16,7,3},{0,8,83},{0,8,19},{21,8,195}, - {19,7,35},{0,8,115},{0,8,51},{0,9,198},{17,7,11},{0,8,99},{0,8,35}, - {0,9,166},{0,8,3},{0,8,131},{0,8,67},{0,9,230},{16,7,7},{0,8,91}, - {0,8,27},{0,9,150},{20,7,67},{0,8,123},{0,8,59},{0,9,214},{18,7,19}, - {0,8,107},{0,8,43},{0,9,182},{0,8,11},{0,8,139},{0,8,75},{0,9,246}, - {16,7,5},{0,8,87},{0,8,23},{64,8,0},{19,7,51},{0,8,119},{0,8,55}, - {0,9,206},{17,7,15},{0,8,103},{0,8,39},{0,9,174},{0,8,7},{0,8,135}, - {0,8,71},{0,9,238},{16,7,9},{0,8,95},{0,8,31},{0,9,158},{20,7,99}, - {0,8,127},{0,8,63},{0,9,222},{18,7,27},{0,8,111},{0,8,47},{0,9,190}, - {0,8,15},{0,8,143},{0,8,79},{0,9,254},{96,7,0},{0,8,80},{0,8,16}, - {20,8,115},{18,7,31},{0,8,112},{0,8,48},{0,9,193},{16,7,10},{0,8,96}, - {0,8,32},{0,9,161},{0,8,0},{0,8,128},{0,8,64},{0,9,225},{16,7,6}, - {0,8,88},{0,8,24},{0,9,145},{19,7,59},{0,8,120},{0,8,56},{0,9,209}, - {17,7,17},{0,8,104},{0,8,40},{0,9,177},{0,8,8},{0,8,136},{0,8,72}, - {0,9,241},{16,7,4},{0,8,84},{0,8,20},{21,8,227},{19,7,43},{0,8,116}, - {0,8,52},{0,9,201},{17,7,13},{0,8,100},{0,8,36},{0,9,169},{0,8,4}, - {0,8,132},{0,8,68},{0,9,233},{16,7,8},{0,8,92},{0,8,28},{0,9,153}, - {20,7,83},{0,8,124},{0,8,60},{0,9,217},{18,7,23},{0,8,108},{0,8,44}, - {0,9,185},{0,8,12},{0,8,140},{0,8,76},{0,9,249},{16,7,3},{0,8,82}, - {0,8,18},{21,8,163},{19,7,35},{0,8,114},{0,8,50},{0,9,197},{17,7,11}, - {0,8,98},{0,8,34},{0,9,165},{0,8,2},{0,8,130},{0,8,66},{0,9,229}, - {16,7,7},{0,8,90},{0,8,26},{0,9,149},{20,7,67},{0,8,122},{0,8,58}, - {0,9,213},{18,7,19},{0,8,106},{0,8,42},{0,9,181},{0,8,10},{0,8,138}, - {0,8,74},{0,9,245},{16,7,5},{0,8,86},{0,8,22},{64,8,0},{19,7,51}, - {0,8,118},{0,8,54},{0,9,205},{17,7,15},{0,8,102},{0,8,38},{0,9,173}, - {0,8,6},{0,8,134},{0,8,70},{0,9,237},{16,7,9},{0,8,94},{0,8,30}, - {0,9,157},{20,7,99},{0,8,126},{0,8,62},{0,9,221},{18,7,27},{0,8,110}, - {0,8,46},{0,9,189},{0,8,14},{0,8,142},{0,8,78},{0,9,253},{96,7,0}, - {0,8,81},{0,8,17},{21,8,131},{18,7,31},{0,8,113},{0,8,49},{0,9,195}, - {16,7,10},{0,8,97},{0,8,33},{0,9,163},{0,8,1},{0,8,129},{0,8,65}, - {0,9,227},{16,7,6},{0,8,89},{0,8,25},{0,9,147},{19,7,59},{0,8,121}, - {0,8,57},{0,9,211},{17,7,17},{0,8,105},{0,8,41},{0,9,179},{0,8,9}, - {0,8,137},{0,8,73},{0,9,243},{16,7,4},{0,8,85},{0,8,21},{16,8,258}, - {19,7,43},{0,8,117},{0,8,53},{0,9,203},{17,7,13},{0,8,101},{0,8,37}, - {0,9,171},{0,8,5},{0,8,133},{0,8,69},{0,9,235},{16,7,8},{0,8,93}, - {0,8,29},{0,9,155},{20,7,83},{0,8,125},{0,8,61},{0,9,219},{18,7,23}, - {0,8,109},{0,8,45},{0,9,187},{0,8,13},{0,8,141},{0,8,77},{0,9,251}, - {16,7,3},{0,8,83},{0,8,19},{21,8,195},{19,7,35},{0,8,115},{0,8,51}, - {0,9,199},{17,7,11},{0,8,99},{0,8,35},{0,9,167},{0,8,3},{0,8,131}, - {0,8,67},{0,9,231},{16,7,7},{0,8,91},{0,8,27},{0,9,151},{20,7,67}, - {0,8,123},{0,8,59},{0,9,215},{18,7,19},{0,8,107},{0,8,43},{0,9,183}, - {0,8,11},{0,8,139},{0,8,75},{0,9,247},{16,7,5},{0,8,87},{0,8,23}, - {64,8,0},{19,7,51},{0,8,119},{0,8,55},{0,9,207},{17,7,15},{0,8,103}, - {0,8,39},{0,9,175},{0,8,7},{0,8,135},{0,8,71},{0,9,239},{16,7,9}, - {0,8,95},{0,8,31},{0,9,159},{20,7,99},{0,8,127},{0,8,63},{0,9,223}, - {18,7,27},{0,8,111},{0,8,47},{0,9,191},{0,8,15},{0,8,143},{0,8,79}, - {0,9,255} - }; - - static const code distfix[32] = { - {16,5,1},{23,5,257},{19,5,17},{27,5,4097},{17,5,5},{25,5,1025}, - {21,5,65},{29,5,16385},{16,5,3},{24,5,513},{20,5,33},{28,5,8193}, - {18,5,9},{26,5,2049},{22,5,129},{64,5,0},{16,5,2},{23,5,385}, - {19,5,25},{27,5,6145},{17,5,7},{25,5,1537},{21,5,97},{29,5,24577}, - {16,5,4},{24,5,769},{20,5,49},{28,5,12289},{18,5,13},{26,5,3073}, - {22,5,193},{64,5,0} - }; diff --git a/sdk-modifications/libsrc/zlib/inflate.c b/sdk-modifications/libsrc/zlib/inflate.c deleted file mode 100755 index cc89517..0000000 --- a/sdk-modifications/libsrc/zlib/inflate.c +++ /dev/null @@ -1,1501 +0,0 @@ -/* inflate.c -- zlib decompression - * Copyright (C) 1995-2011 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* - * Change history: - * - * 1.2.beta0 24 Nov 2002 - * - First version -- complete rewrite of inflate to simplify code, avoid - * creation of window when not needed, minimize use of window when it is - * needed, make inffast.c even faster, implement gzip decoding, and to - * improve code readability and style over the previous zlib inflate code - * - * 1.2.beta1 25 Nov 2002 - * - Use pointers for available input and output checking in inffast.c - * - Remove input and output counters in inffast.c - * - Change inffast.c entry and loop from avail_in >= 7 to >= 6 - * - Remove unnecessary second byte pull from length extra in inffast.c - * - Unroll direct copy to three copies per loop in inffast.c - * - * 1.2.beta2 4 Dec 2002 - * - Change external routine names to reduce potential conflicts - * - Correct filename to inffixed.h for fixed tables in inflate.c - * - Make hbuf[] unsigned char to match parameter type in inflate.c - * - Change strm->next_out[-state->offset] to *(strm->next_out - state->offset) - * to avoid negation problem on Alphas (64 bit) in inflate.c - * - * 1.2.beta3 22 Dec 2002 - * - Add comments on state->bits assertion in inffast.c - * - Add comments on op field in inftrees.h - * - Fix bug in reuse of allocated window after inflateReset() - * - Remove bit fields--back to byte structure for speed - * - Remove distance extra == 0 check in inflate_fast()--only helps for lengths - * - Change post-increments to pre-increments in inflate_fast(), PPC biased? - * - Add compile time option, POSTINC, to use post-increments instead (Intel?) - * - Make MATCH copy in inflate() much faster for when inflate_fast() not used - * - Use local copies of stream next and avail values, as well as local bit - * buffer and bit count in inflate()--for speed when inflate_fast() not used - * - * 1.2.beta4 1 Jan 2003 - * - Split ptr - 257 statements in inflate_table() to avoid compiler warnings - * - Move a comment on output buffer sizes from inffast.c to inflate.c - * - Add comments in inffast.c to introduce the inflate_fast() routine - * - Rearrange window copies in inflate_fast() for speed and simplification - * - Unroll last copy for window match in inflate_fast() - * - Use local copies of window variables in inflate_fast() for speed - * - Pull out common wnext == 0 case for speed in inflate_fast() - * - Make op and len in inflate_fast() unsigned for consistency - * - Add FAR to lcode and dcode declarations in inflate_fast() - * - Simplified bad distance check in inflate_fast() - * - Added inflateBackInit(), inflateBack(), and inflateBackEnd() in new - * source file infback.c to provide a call-back interface to inflate for - * programs like gzip and unzip -- uses window as output buffer to avoid - * window copying - * - * 1.2.beta5 1 Jan 2003 - * - Improved inflateBack() interface to allow the caller to provide initial - * input in strm. - * - Fixed stored blocks bug in inflateBack() - * - * 1.2.beta6 4 Jan 2003 - * - Added comments in inffast.c on effectiveness of POSTINC - * - Typecasting all around to reduce compiler warnings - * - Changed loops from while (1) or do {} while (1) to for (;;), again to - * make compilers happy - * - Changed type of window in inflateBackInit() to unsigned char * - * - * 1.2.beta7 27 Jan 2003 - * - Changed many types to unsigned or unsigned short to avoid warnings - * - Added inflateCopy() function - * - * 1.2.0 9 Mar 2003 - * - Changed inflateBack() interface to provide separate opaque descriptors - * for the in() and out() functions - * - Changed inflateBack() argument and in_func typedef to swap the length - * and buffer address return values for the input function - * - Check next_in and next_out for Z_NULL on entry to inflate() - * - * The history for versions after 1.2.0 are in ChangeLog in zlib distribution. - */ - -#include "zutil.h" -#include "inftrees.h" -#include "inflate.h" -#include "inffast.h" - -#ifdef MAKEFIXED -# ifndef BUILDFIXED -# define BUILDFIXED -# endif -#endif - -/* function prototypes */ -local void fixedtables OF((struct inflate_state FAR *state)); -local int updatewindow OF((z_streamp strm, unsigned out)); -#ifdef BUILDFIXED - void makefixed OF((void)); -#endif -local unsigned syncsearch OF((unsigned FAR *have, unsigned char FAR *buf, - unsigned len)); - -int ZEXPORT inflateResetKeep(strm) -z_streamp strm; -{ - struct inflate_state FAR *state; - - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - state = (struct inflate_state FAR *)strm->state; - strm->total_in = strm->total_out = state->total = 0; - strm->msg = Z_NULL; - if (state->wrap) /* to support ill-conceived Java test suite */ - strm->adler = state->wrap & 1; - state->mode = HEAD; - state->last = 0; - state->havedict = 0; - state->dmax = 32768U; - state->head = Z_NULL; - state->hold = 0; - state->bits = 0; - state->lencode = state->distcode = state->next = state->codes; - state->sane = 1; - state->back = -1; - Tracev((stderr, "inflate: reset\n")); - return Z_OK; -} - -int ZEXPORT inflateReset(strm) -z_streamp strm; -{ - struct inflate_state FAR *state; - - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - state = (struct inflate_state FAR *)strm->state; - state->wsize = 0; - state->whave = 0; - state->wnext = 0; - return inflateResetKeep(strm); -} - -int ZEXPORT inflateReset2(strm, windowBits) -z_streamp strm; -int windowBits; -{ - int wrap; - struct inflate_state FAR *state; - - /* get the state */ - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - state = (struct inflate_state FAR *)strm->state; - - /* extract wrap request from windowBits parameter */ - if (windowBits < 0) { - wrap = 0; - windowBits = -windowBits; - } - else { - wrap = (windowBits >> 4) + 1; -#ifdef GUNZIP - if (windowBits < 48) - windowBits &= 15; -#endif - } - - /* set number of window bits, free window if different */ - if (windowBits && (windowBits < 8 || windowBits > 15)) - return Z_STREAM_ERROR; - if (state->window != Z_NULL && state->wbits != (unsigned)windowBits) { - ZFREE(strm, state->window); - state->window = Z_NULL; - } - - /* update state and reset the rest of it */ - state->wrap = wrap; - state->wbits = (unsigned)windowBits; - return inflateReset(strm); -} - -int ZEXPORT inflateInit2_(strm, windowBits, version, stream_size) -z_streamp strm; -int windowBits; -const char *version; -int stream_size; -{ - int ret; - struct inflate_state FAR *state; - - if (version == Z_NULL || version[0] != ZLIB_VERSION[0] || - stream_size != (int)(sizeof(z_stream))) - return Z_VERSION_ERROR; - if (strm == Z_NULL) return Z_STREAM_ERROR; - strm->msg = Z_NULL; /* in case we return an error */ - if (strm->zalloc == (alloc_func)0) { -#ifdef Z_SOLO - return Z_STREAM_ERROR; -#else - strm->zalloc = zcalloc; - strm->opaque = (voidpf)0; -#endif - } - if (strm->zfree == (free_func)0) -#ifdef Z_SOLO - return Z_STREAM_ERROR; -#else - strm->zfree = zcfree; -#endif - state = (struct inflate_state FAR *) - ZALLOC(strm, 1, sizeof(struct inflate_state)); - if (state == Z_NULL) return Z_MEM_ERROR; - Tracev((stderr, "inflate: allocated\n")); - strm->state = (struct internal_state FAR *)state; - state->window = Z_NULL; - ret = inflateReset2(strm, windowBits); - if (ret != Z_OK) { - ZFREE(strm, state); - strm->state = Z_NULL; - } - return ret; -} - -int ZEXPORT inflateInit_(strm, version, stream_size) -z_streamp strm; -const char *version; -int stream_size; -{ - return inflateInit2_(strm, DEF_WBITS, version, stream_size); -} - -int ZEXPORT inflatePrime(strm, bits, value) -z_streamp strm; -int bits; -int value; -{ - struct inflate_state FAR *state; - - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - state = (struct inflate_state FAR *)strm->state; - if (bits < 0) { - state->hold = 0; - state->bits = 0; - return Z_OK; - } - if (bits > 16 || state->bits + bits > 32) return Z_STREAM_ERROR; - value &= (1L << bits) - 1; - state->hold += value << state->bits; - state->bits += bits; - return Z_OK; -} - -/* - Return state with length and distance decoding tables and index sizes set to - fixed code decoding. Normally this returns fixed tables from inffixed.h. - If BUILDFIXED is defined, then instead this routine builds the tables the - first time it's called, and returns those tables the first time and - thereafter. This reduces the size of the code by about 2K bytes, in - exchange for a little execution time. However, BUILDFIXED should not be - used for threaded applications, since the rewriting of the tables and virgin - may not be thread-safe. - */ -local void fixedtables(state) -struct inflate_state FAR *state; -{ -#ifdef BUILDFIXED - static int virgin = 1; - static code *lenfix, *distfix; - static code fixed[544]; - - /* build fixed huffman tables if first call (may not be thread safe) */ - if (virgin) { - unsigned sym, bits; - static code *next; - - /* literal/length table */ - sym = 0; - while (sym < 144) state->lens[sym++] = 8; - while (sym < 256) state->lens[sym++] = 9; - while (sym < 280) state->lens[sym++] = 7; - while (sym < 288) state->lens[sym++] = 8; - next = fixed; - lenfix = next; - bits = 9; - inflate_table(LENS, state->lens, 288, &(next), &(bits), state->work); - - /* distance table */ - sym = 0; - while (sym < 32) state->lens[sym++] = 5; - distfix = next; - bits = 5; - inflate_table(DISTS, state->lens, 32, &(next), &(bits), state->work); - - /* do this just once */ - virgin = 0; - } -#else /* !BUILDFIXED */ -# include "inffixed.h" -#endif /* BUILDFIXED */ - state->lencode = lenfix; - state->lenbits = 9; - state->distcode = distfix; - state->distbits = 5; -} - -#ifdef MAKEFIXED -#include <stdio.h> - -/* - Write out the inffixed.h that is #include'd above. Defining MAKEFIXED also - defines BUILDFIXED, so the tables are built on the fly. makefixed() writes - those tables to stdout, which would be piped to inffixed.h. A small program - can simply call makefixed to do this: - - void makefixed(void); - - int main(void) - { - makefixed(); - return 0; - } - - Then that can be linked with zlib built with MAKEFIXED defined and run: - - a.out > inffixed.h - */ -void makefixed() -{ - unsigned low, size; - struct inflate_state state; - - fixedtables(&state); - puts(" /* inffixed.h -- table for decoding fixed codes"); - puts(" * Generated automatically by makefixed()."); - puts(" */"); - puts(""); - puts(" /* WARNING: this file should *not* be used by applications."); - puts(" It is part of the implementation of this library and is"); - puts(" subject to change. Applications should only use zlib.h."); - puts(" */"); - puts(""); - size = 1U << 9; - printf(" static const code lenfix[%u] = {", size); - low = 0; - for (;;) { - if ((low % 7) == 0) printf("\n "); - printf("{%u,%u,%d}", (low & 127) == 99 ? 64 : state.lencode[low].op, - state.lencode[low].bits, state.lencode[low].val); - if (++low == size) break; - putchar(','); - } - puts("\n };"); - size = 1U << 5; - printf("\n static const code distfix[%u] = {", size); - low = 0; - for (;;) { - if ((low % 6) == 0) printf("\n "); - printf("{%u,%u,%d}", state.distcode[low].op, state.distcode[low].bits, - state.distcode[low].val); - if (++low == size) break; - putchar(','); - } - puts("\n };"); -} -#endif /* MAKEFIXED */ - -/* - Update the window with the last wsize (normally 32K) bytes written before - returning. If window does not exist yet, create it. This is only called - when a window is already in use, or when output has been written during this - inflate call, but the end of the deflate stream has not been reached yet. - It is also called to create a window for dictionary data when a dictionary - is loaded. - - Providing output buffers larger than 32K to inflate() should provide a speed - advantage, since only the last 32K of output is copied to the sliding window - upon return from inflate(), and since all distances after the first 32K of - output will fall in the output data, making match copies simpler and faster. - The advantage may be dependent on the size of the processor's data caches. - */ -local int updatewindow(strm, out) -z_streamp strm; -unsigned out; -{ - struct inflate_state FAR *state; - unsigned copy, dist; - - state = (struct inflate_state FAR *)strm->state; - - /* if it hasn't been done already, allocate space for the window */ - if (state->window == Z_NULL) { - state->window = (unsigned char FAR *) - ZALLOC(strm, 1U << state->wbits, - sizeof(unsigned char)); - if (state->window == Z_NULL) return 1; - } - - /* if window not in use yet, initialize */ - if (state->wsize == 0) { - state->wsize = 1U << state->wbits; - state->wnext = 0; - state->whave = 0; - } - - /* copy state->wsize or less output bytes into the circular window */ - copy = out - strm->avail_out; - if (copy >= state->wsize) { - zmemcpy(state->window, strm->next_out - state->wsize, state->wsize); - state->wnext = 0; - state->whave = state->wsize; - } - else { - dist = state->wsize - state->wnext; - if (dist > copy) dist = copy; - zmemcpy(state->window + state->wnext, strm->next_out - copy, dist); - copy -= dist; - if (copy) { - zmemcpy(state->window, strm->next_out - copy, copy); - state->wnext = copy; - state->whave = state->wsize; - } - else { - state->wnext += dist; - if (state->wnext == state->wsize) state->wnext = 0; - if (state->whave < state->wsize) state->whave += dist; - } - } - return 0; -} - -/* Macros for inflate(): */ - -/* check function to use adler32() for zlib or crc32() for gzip */ -#ifdef GUNZIP -# define UPDATE(check, buf, len) \ - (state->flags ? crc32(check, buf, len) : adler32(check, buf, len)) -#else -# define UPDATE(check, buf, len) adler32(check, buf, len) -#endif - -/* check macros for header crc */ -#ifdef GUNZIP -# define CRC2(check, word) \ - do { \ - hbuf[0] = (unsigned char)(word); \ - hbuf[1] = (unsigned char)((word) >> 8); \ - check = crc32(check, hbuf, 2); \ - } while (0) - -# define CRC4(check, word) \ - do { \ - hbuf[0] = (unsigned char)(word); \ - hbuf[1] = (unsigned char)((word) >> 8); \ - hbuf[2] = (unsigned char)((word) >> 16); \ - hbuf[3] = (unsigned char)((word) >> 24); \ - check = crc32(check, hbuf, 4); \ - } while (0) -#endif - -/* Load registers with state in inflate() for speed */ -#define LOAD() \ - do { \ - put = strm->next_out; \ - left = strm->avail_out; \ - next = strm->next_in; \ - have = strm->avail_in; \ - hold = state->hold; \ - bits = state->bits; \ - } while (0) - -/* Restore state from registers in inflate() */ -#define RESTORE() \ - do { \ - strm->next_out = put; \ - strm->avail_out = left; \ - strm->next_in = next; \ - strm->avail_in = have; \ - state->hold = hold; \ - state->bits = bits; \ - } while (0) - -/* Clear the input bit accumulator */ -#define INITBITS() \ - do { \ - hold = 0; \ - bits = 0; \ - } while (0) - -/* Get a byte of input into the bit accumulator, or return from inflate() - if there is no input available. */ -#define PULLBYTE() \ - do { \ - if (have == 0) goto inf_leave; \ - have--; \ - hold += (unsigned long)(*next++) << bits; \ - bits += 8; \ - } while (0) - -/* Assure that there are at least n bits in the bit accumulator. If there is - not enough available input to do that, then return from inflate(). */ -#define NEEDBITS(n) \ - do { \ - while (bits < (unsigned)(n)) \ - PULLBYTE(); \ - } while (0) - -/* Return the low n bits of the bit accumulator (n < 16) */ -#define BITS(n) \ - ((unsigned)hold & ((1U << (n)) - 1)) - -/* Remove n bits from the bit accumulator */ -#define DROPBITS(n) \ - do { \ - hold >>= (n); \ - bits -= (unsigned)(n); \ - } while (0) - -/* Remove zero to seven bits as needed to go to a byte boundary */ -#define BYTEBITS() \ - do { \ - hold >>= bits & 7; \ - bits -= bits & 7; \ - } while (0) - -/* Reverse the bytes in a 32-bit value */ -#define REVERSE(q) \ - ((((q) >> 24) & 0xff) + (((q) >> 8) & 0xff00) + \ - (((q) & 0xff00) << 8) + (((q) & 0xff) << 24)) - -/* - inflate() uses a state machine to process as much input data and generate as - much output data as possible before returning. The state machine is - structured roughly as follows: - - for (;;) switch (state) { - ... - case STATEn: - if (not enough input data or output space to make progress) - return; - ... make progress ... - state = STATEm; - break; - ... - } - - so when inflate() is called again, the same case is attempted again, and - if the appropriate resources are provided, the machine proceeds to the - next state. The NEEDBITS() macro is usually the way the state evaluates - whether it can proceed or should return. NEEDBITS() does the return if - the requested bits are not available. The typical use of the BITS macros - is: - - NEEDBITS(n); - ... do something with BITS(n) ... - DROPBITS(n); - - where NEEDBITS(n) either returns from inflate() if there isn't enough - input left to load n bits into the accumulator, or it continues. BITS(n) - gives the low n bits in the accumulator. When done, DROPBITS(n) drops - the low n bits off the accumulator. INITBITS() clears the accumulator - and sets the number of available bits to zero. BYTEBITS() discards just - enough bits to put the accumulator on a byte boundary. After BYTEBITS() - and a NEEDBITS(8), then BITS(8) would return the next byte in the stream. - - NEEDBITS(n) uses PULLBYTE() to get an available byte of input, or to return - if there is no input available. The decoding of variable length codes uses - PULLBYTE() directly in order to pull just enough bytes to decode the next - code, and no more. - - Some states loop until they get enough input, making sure that enough - state information is maintained to continue the loop where it left off - if NEEDBITS() returns in the loop. For example, want, need, and keep - would all have to actually be part of the saved state in case NEEDBITS() - returns: - - case STATEw: - while (want < need) { - NEEDBITS(n); - keep[want++] = BITS(n); - DROPBITS(n); - } - state = STATEx; - case STATEx: - - As shown above, if the next state is also the next case, then the break - is omitted. - - A state may also return if there is not enough output space available to - complete that state. Those states are copying stored data, writing a - literal byte, and copying a matching string. - - When returning, a "goto inf_leave" is used to update the total counters, - update the check value, and determine whether any progress has been made - during that inflate() call in order to return the proper return code. - Progress is defined as a change in either strm->avail_in or strm->avail_out. - When there is a window, goto inf_leave will update the window with the last - output written. If a goto inf_leave occurs in the middle of decompression - and there is no window currently, goto inf_leave will create one and copy - output to the window for the next call of inflate(). - - In this implementation, the flush parameter of inflate() only affects the - return code (per zlib.h). inflate() always writes as much as possible to - strm->next_out, given the space available and the provided input--the effect - documented in zlib.h of Z_SYNC_FLUSH. Furthermore, inflate() always defers - the allocation of and copying into a sliding window until necessary, which - provides the effect documented in zlib.h for Z_FINISH when the entire input - stream available. So the only thing the flush parameter actually does is: - when flush is set to Z_FINISH, inflate() cannot return Z_OK. Instead it - will return Z_BUF_ERROR if it has not reached the end of the stream. - */ - -int ZEXPORT inflate(strm, flush) -z_streamp strm; -int flush; -{ - struct inflate_state FAR *state; - unsigned char FAR *next; /* next input */ - unsigned char FAR *put; /* next output */ - unsigned have, left; /* available input and output */ - unsigned long hold; /* bit buffer */ - unsigned bits; /* bits in bit buffer */ - unsigned in, out; /* save starting available input and output */ - unsigned copy; /* number of stored or match bytes to copy */ - unsigned char FAR *from; /* where to copy match bytes from */ - code here; /* current decoding table entry */ - code last; /* parent table entry */ - unsigned len; /* length to copy for repeats, bits to drop */ - int ret; /* return code */ -#ifdef GUNZIP - unsigned char hbuf[4]; /* buffer for gzip header crc calculation */ -#endif - static const unsigned short order[19] = /* permutation of code lengths */ - {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; - - if (strm == Z_NULL || strm->state == Z_NULL || strm->next_out == Z_NULL || - (strm->next_in == Z_NULL && strm->avail_in != 0)) - return Z_STREAM_ERROR; - - state = (struct inflate_state FAR *)strm->state; - if (state->mode == TYPE) state->mode = TYPEDO; /* skip check */ - LOAD(); - in = have; - out = left; - ret = Z_OK; - for (;;) - switch (state->mode) { - case HEAD: - if (state->wrap == 0) { - state->mode = TYPEDO; - break; - } - NEEDBITS(16); -#ifdef GUNZIP - if ((state->wrap & 2) && hold == 0x8b1f) { /* gzip header */ - state->check = crc32(0L, Z_NULL, 0); - CRC2(state->check, hold); - INITBITS(); - state->mode = FLAGS; - break; - } - state->flags = 0; /* expect zlib header */ - if (state->head != Z_NULL) - state->head->done = -1; - if (!(state->wrap & 1) || /* check if zlib header allowed */ -#else - if ( -#endif - ((BITS(8) << 8) + (hold >> 8)) % 31) { - strm->msg = (char *)"incorrect header check"; - state->mode = BAD; - break; - } - if (BITS(4) != Z_DEFLATED) { - strm->msg = (char *)"unknown compression method"; - state->mode = BAD; - break; - } - DROPBITS(4); - len = BITS(4) + 8; - if (state->wbits == 0) - state->wbits = len; - else if (len > state->wbits) { - strm->msg = (char *)"invalid window size"; - state->mode = BAD; - break; - } - state->dmax = 1U << len; - Tracev((stderr, "inflate: zlib header ok\n")); - strm->adler = state->check = adler32(0L, Z_NULL, 0); - state->mode = hold & 0x200 ? DICTID : TYPE; - INITBITS(); - break; -#ifdef GUNZIP - case FLAGS: - NEEDBITS(16); - state->flags = (int)(hold); - if ((state->flags & 0xff) != Z_DEFLATED) { - strm->msg = (char *)"unknown compression method"; - state->mode = BAD; - break; - } - if (state->flags & 0xe000) { - strm->msg = (char *)"unknown header flags set"; - state->mode = BAD; - break; - } - if (state->head != Z_NULL) - state->head->text = (int)((hold >> 8) & 1); - if (state->flags & 0x0200) CRC2(state->check, hold); - INITBITS(); - state->mode = TIME; - case TIME: - NEEDBITS(32); - if (state->head != Z_NULL) - state->head->time = hold; - if (state->flags & 0x0200) CRC4(state->check, hold); - INITBITS(); - state->mode = OS; - case OS: - NEEDBITS(16); - if (state->head != Z_NULL) { - state->head->xflags = (int)(hold & 0xff); - state->head->os = (int)(hold >> 8); - } - if (state->flags & 0x0200) CRC2(state->check, hold); - INITBITS(); - state->mode = EXLEN; - case EXLEN: - if (state->flags & 0x0400) { - NEEDBITS(16); - state->length = (unsigned)(hold); - if (state->head != Z_NULL) - state->head->extra_len = (unsigned)hold; - if (state->flags & 0x0200) CRC2(state->check, hold); - INITBITS(); - } - else if (state->head != Z_NULL) - state->head->extra = Z_NULL; - state->mode = EXTRA; - case EXTRA: - if (state->flags & 0x0400) { - copy = state->length; - if (copy > have) copy = have; - if (copy) { - if (state->head != Z_NULL && - state->head->extra != Z_NULL) { - len = state->head->extra_len - state->length; - zmemcpy(state->head->extra + len, next, - len + copy > state->head->extra_max ? - state->head->extra_max - len : copy); - } - if (state->flags & 0x0200) - state->check = crc32(state->check, next, copy); - have -= copy; - next += copy; - state->length -= copy; - } - if (state->length) goto inf_leave; - } - state->length = 0; - state->mode = NAME; - case NAME: - if (state->flags & 0x0800) { - if (have == 0) goto inf_leave; - copy = 0; - do { - len = (unsigned)(next[copy++]); - if (state->head != Z_NULL && - state->head->name != Z_NULL && - state->length < state->head->name_max) - state->head->name[state->length++] = len; - } while (len && copy < have); - if (state->flags & 0x0200) - state->check = crc32(state->check, next, copy); - have -= copy; - next += copy; - if (len) goto inf_leave; - } - else if (state->head != Z_NULL) - state->head->name = Z_NULL; - state->length = 0; - state->mode = COMMENT; - case COMMENT: - if (state->flags & 0x1000) { - if (have == 0) goto inf_leave; - copy = 0; - do { - len = (unsigned)(next[copy++]); - if (state->head != Z_NULL && - state->head->comment != Z_NULL && - state->length < state->head->comm_max) - state->head->comment[state->length++] = len; - } while (len && copy < have); - if (state->flags & 0x0200) - state->check = crc32(state->check, next, copy); - have -= copy; - next += copy; - if (len) goto inf_leave; - } - else if (state->head != Z_NULL) - state->head->comment = Z_NULL; - state->mode = HCRC; - case HCRC: - if (state->flags & 0x0200) { - NEEDBITS(16); - if (hold != (state->check & 0xffff)) { - strm->msg = (char *)"header crc mismatch"; - state->mode = BAD; - break; - } - INITBITS(); - } - if (state->head != Z_NULL) { - state->head->hcrc = (int)((state->flags >> 9) & 1); - state->head->done = 1; - } - strm->adler = state->check = crc32(0L, Z_NULL, 0); - state->mode = TYPE; - break; -#endif - case DICTID: - NEEDBITS(32); - strm->adler = state->check = REVERSE(hold); - INITBITS(); - state->mode = DICT; - case DICT: - if (state->havedict == 0) { - RESTORE(); - return Z_NEED_DICT; - } - strm->adler = state->check = adler32(0L, Z_NULL, 0); - state->mode = TYPE; - case TYPE: - if (flush == Z_BLOCK || flush == Z_TREES) goto inf_leave; - case TYPEDO: - if (state->last) { - BYTEBITS(); - state->mode = CHECK; - break; - } - NEEDBITS(3); - state->last = BITS(1); - DROPBITS(1); - switch (BITS(2)) { - case 0: /* stored block */ - Tracev((stderr, "inflate: stored block%s\n", - state->last ? " (last)" : "")); - state->mode = STORED; - break; - case 1: /* fixed block */ - fixedtables(state); - Tracev((stderr, "inflate: fixed codes block%s\n", - state->last ? " (last)" : "")); - state->mode = LEN_; /* decode codes */ - if (flush == Z_TREES) { - DROPBITS(2); - goto inf_leave; - } - break; - case 2: /* dynamic block */ - Tracev((stderr, "inflate: dynamic codes block%s\n", - state->last ? " (last)" : "")); - state->mode = TABLE; - break; - case 3: - strm->msg = (char *)"invalid block type"; - state->mode = BAD; - } - DROPBITS(2); - break; - case STORED: - BYTEBITS(); /* go to byte boundary */ - NEEDBITS(32); - if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) { - strm->msg = (char *)"invalid stored block lengths"; - state->mode = BAD; - break; - } - state->length = (unsigned)hold & 0xffff; - Tracev((stderr, "inflate: stored length %u\n", - state->length)); - INITBITS(); - state->mode = COPY_; - if (flush == Z_TREES) goto inf_leave; - case COPY_: - state->mode = COPY; - case COPY: - copy = state->length; - if (copy) { - if (copy > have) copy = have; - if (copy > left) copy = left; - if (copy == 0) goto inf_leave; - zmemcpy(put, next, copy); - have -= copy; - next += copy; - left -= copy; - put += copy; - state->length -= copy; - break; - } - Tracev((stderr, "inflate: stored end\n")); - state->mode = TYPE; - break; - case TABLE: - NEEDBITS(14); - state->nlen = BITS(5) + 257; - DROPBITS(5); - state->ndist = BITS(5) + 1; - DROPBITS(5); - state->ncode = BITS(4) + 4; - DROPBITS(4); -#ifndef PKZIP_BUG_WORKAROUND - if (state->nlen > 286 || state->ndist > 30) { - strm->msg = (char *)"too many length or distance symbols"; - state->mode = BAD; - break; - } -#endif - Tracev((stderr, "inflate: table sizes ok\n")); - state->have = 0; - state->mode = LENLENS; - case LENLENS: - while (state->have < state->ncode) { - NEEDBITS(3); - state->lens[order[state->have++]] = (unsigned short)BITS(3); - DROPBITS(3); - } - while (state->have < 19) - state->lens[order[state->have++]] = 0; - state->next = state->codes; - state->lencode = (code const FAR *)(state->next); - state->lenbits = 7; - ret = inflate_table(CODES, state->lens, 19, &(state->next), - &(state->lenbits), state->work); - if (ret) { - strm->msg = (char *)"invalid code lengths set"; - state->mode = BAD; - break; - } - Tracev((stderr, "inflate: code lengths ok\n")); - state->have = 0; - state->mode = CODELENS; - case CODELENS: - while (state->have < state->nlen + state->ndist) { - for (;;) { - here = state->lencode[BITS(state->lenbits)]; - if ((unsigned)(here.bits) <= bits) break; - PULLBYTE(); - } - if (here.val < 16) { - DROPBITS(here.bits); - state->lens[state->have++] = here.val; - } - else { - if (here.val == 16) { - NEEDBITS(here.bits + 2); - DROPBITS(here.bits); - if (state->have == 0) { - strm->msg = (char *)"invalid bit length repeat"; - state->mode = BAD; - break; - } - len = state->lens[state->have - 1]; - copy = 3 + BITS(2); - DROPBITS(2); - } - else if (here.val == 17) { - NEEDBITS(here.bits + 3); - DROPBITS(here.bits); - len = 0; - copy = 3 + BITS(3); - DROPBITS(3); - } - else { - NEEDBITS(here.bits + 7); - DROPBITS(here.bits); - len = 0; - copy = 11 + BITS(7); - DROPBITS(7); - } - if (state->have + copy > state->nlen + state->ndist) { - strm->msg = (char *)"invalid bit length repeat"; - state->mode = BAD; - break; - } - while (copy--) - state->lens[state->have++] = (unsigned short)len; - } - } - - /* handle error breaks in while */ - if (state->mode == BAD) break; - - /* check for end-of-block code (better have one) */ - if (state->lens[256] == 0) { - strm->msg = (char *)"invalid code -- missing end-of-block"; - state->mode = BAD; - break; - } - - /* build code tables -- note: do not change the lenbits or distbits - values here (9 and 6) without reading the comments in inftrees.h - concerning the ENOUGH constants, which depend on those values */ - state->next = state->codes; - state->lencode = (code const FAR *)(state->next); - state->lenbits = 9; - ret = inflate_table(LENS, state->lens, state->nlen, &(state->next), - &(state->lenbits), state->work); - if (ret) { - strm->msg = (char *)"invalid literal/lengths set"; - state->mode = BAD; - break; - } - state->distcode = (code const FAR *)(state->next); - state->distbits = 6; - ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist, - &(state->next), &(state->distbits), state->work); - if (ret) { - strm->msg = (char *)"invalid distances set"; - state->mode = BAD; - break; - } - Tracev((stderr, "inflate: codes ok\n")); - state->mode = LEN_; - if (flush == Z_TREES) goto inf_leave; - case LEN_: - state->mode = LEN; - case LEN: - if (have >= 6 && left >= 258) { - RESTORE(); - inflate_fast(strm, out); - LOAD(); - if (state->mode == TYPE) - state->back = -1; - break; - } - state->back = 0; - for (;;) { - here = state->lencode[BITS(state->lenbits)]; - if ((unsigned)(here.bits) <= bits) break; - PULLBYTE(); - } - if (here.op && (here.op & 0xf0) == 0) { - last = here; - for (;;) { - here = state->lencode[last.val + - (BITS(last.bits + last.op) >> last.bits)]; - if ((unsigned)(last.bits + here.bits) <= bits) break; - PULLBYTE(); - } - DROPBITS(last.bits); - state->back += last.bits; - } - DROPBITS(here.bits); - state->back += here.bits; - state->length = (unsigned)here.val; - if ((int)(here.op) == 0) { - Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ? - "inflate: literal '%c'\n" : - "inflate: literal 0x%02x\n", here.val)); - state->mode = LIT; - break; - } - if (here.op & 32) { - Tracevv((stderr, "inflate: end of block\n")); - state->back = -1; - state->mode = TYPE; - break; - } - if (here.op & 64) { - strm->msg = (char *)"invalid literal/length code"; - state->mode = BAD; - break; - } - state->extra = (unsigned)(here.op) & 15; - state->mode = LENEXT; - case LENEXT: - if (state->extra) { - NEEDBITS(state->extra); - state->length += BITS(state->extra); - DROPBITS(state->extra); - state->back += state->extra; - } - Tracevv((stderr, "inflate: length %u\n", state->length)); - state->was = state->length; - state->mode = DIST; - case DIST: - for (;;) { - here = state->distcode[BITS(state->distbits)]; - if ((unsigned)(here.bits) <= bits) break; - PULLBYTE(); - } - if ((here.op & 0xf0) == 0) { - last = here; - for (;;) { - here = state->distcode[last.val + - (BITS(last.bits + last.op) >> last.bits)]; - if ((unsigned)(last.bits + here.bits) <= bits) break; - PULLBYTE(); - } - DROPBITS(last.bits); - state->back += last.bits; - } - DROPBITS(here.bits); - state->back += here.bits; - if (here.op & 64) { - strm->msg = (char *)"invalid distance code"; - state->mode = BAD; - break; - } - state->offset = (unsigned)here.val; - state->extra = (unsigned)(here.op) & 15; - state->mode = DISTEXT; - case DISTEXT: - if (state->extra) { - NEEDBITS(state->extra); - state->offset += BITS(state->extra); - DROPBITS(state->extra); - state->back += state->extra; - } -#ifdef INFLATE_STRICT - if (state->offset > state->dmax) { - strm->msg = (char *)"invalid distance too far back"; - state->mode = BAD; - break; - } -#endif - Tracevv((stderr, "inflate: distance %u\n", state->offset)); - state->mode = MATCH; - case MATCH: - if (left == 0) goto inf_leave; - copy = out - left; - if (state->offset > copy) { /* copy from window */ - copy = state->offset - copy; - if (copy > state->whave) { - if (state->sane) { - strm->msg = (char *)"invalid distance too far back"; - state->mode = BAD; - break; - } -#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR - Trace((stderr, "inflate.c too far\n")); - copy -= state->whave; - if (copy > state->length) copy = state->length; - if (copy > left) copy = left; - left -= copy; - state->length -= copy; - do { - *put++ = 0; - } while (--copy); - if (state->length == 0) state->mode = LEN; - break; -#endif - } - if (copy > state->wnext) { - copy -= state->wnext; - from = state->window + (state->wsize - copy); - } - else - from = state->window + (state->wnext - copy); - if (copy > state->length) copy = state->length; - } - else { /* copy from output */ - from = put - state->offset; - copy = state->length; - } - if (copy > left) copy = left; - left -= copy; - state->length -= copy; - do { - *put++ = *from++; - } while (--copy); - if (state->length == 0) state->mode = LEN; - break; - case LIT: - if (left == 0) goto inf_leave; - *put++ = (unsigned char)(state->length); - left--; - state->mode = LEN; - break; - case CHECK: - if (state->wrap) { - NEEDBITS(32); - out -= left; - strm->total_out += out; - state->total += out; - if (out) - strm->adler = state->check = - UPDATE(state->check, put - out, out); - out = left; - if (( -#ifdef GUNZIP - state->flags ? hold : -#endif - REVERSE(hold)) != state->check) { - strm->msg = (char *)"incorrect data check"; - state->mode = BAD; - break; - } - INITBITS(); - Tracev((stderr, "inflate: check matches trailer\n")); - } -#ifdef GUNZIP - state->mode = LENGTH; - case LENGTH: - if (state->wrap && state->flags) { - NEEDBITS(32); - if (hold != (state->total & 0xffffffffUL)) { - strm->msg = (char *)"incorrect length check"; - state->mode = BAD; - break; - } - INITBITS(); - Tracev((stderr, "inflate: length matches trailer\n")); - } -#endif - state->mode = DONE; - case DONE: - ret = Z_STREAM_END; - goto inf_leave; - case BAD: - ret = Z_DATA_ERROR; - goto inf_leave; - case MEM: - return Z_MEM_ERROR; - case SYNC: - default: - return Z_STREAM_ERROR; - } - - /* - Return from inflate(), updating the total counts and the check value. - If there was no progress during the inflate() call, return a buffer - error. Call updatewindow() to create and/or update the window state. - Note: a memory error from inflate() is non-recoverable. - */ - inf_leave: - RESTORE(); - if (state->wsize || (out != strm->avail_out && state->mode < BAD && - (state->mode < CHECK || flush != Z_FINISH))) - if (updatewindow(strm, out)) { - state->mode = MEM; - return Z_MEM_ERROR; - } - in -= strm->avail_in; - out -= strm->avail_out; - strm->total_in += in; - strm->total_out += out; - state->total += out; - if (state->wrap && out) - strm->adler = state->check = - UPDATE(state->check, strm->next_out - out, out); - strm->data_type = state->bits + (state->last ? 64 : 0) + - (state->mode == TYPE ? 128 : 0) + - (state->mode == LEN_ || state->mode == COPY_ ? 256 : 0); - if (((in == 0 && out == 0) || flush == Z_FINISH) && ret == Z_OK) - ret = Z_BUF_ERROR; - return ret; -} - -int ZEXPORT inflateEnd(strm) -z_streamp strm; -{ - struct inflate_state FAR *state; - if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0) - return Z_STREAM_ERROR; - state = (struct inflate_state FAR *)strm->state; - if (state->window != Z_NULL) ZFREE(strm, state->window); - ZFREE(strm, strm->state); - strm->state = Z_NULL; - Tracev((stderr, "inflate: end\n")); - return Z_OK; -} - -int ZEXPORT inflateSetDictionary(strm, dictionary, dictLength) -z_streamp strm; -const Bytef *dictionary; -uInt dictLength; -{ - struct inflate_state FAR *state; - unsigned long id; - unsigned char *next; - unsigned avail; - int ret; - - /* check state */ - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - state = (struct inflate_state FAR *)strm->state; - if (state->wrap != 0 && state->mode != DICT) - return Z_STREAM_ERROR; - - /* check for correct dictionary id */ - if (state->mode == DICT) { - id = adler32(0L, Z_NULL, 0); - id = adler32(id, dictionary, dictLength); - if (id != state->check) - return Z_DATA_ERROR; - } - - /* copy dictionary to window using updatewindow(), which will amend the - existing dictionary if appropriate */ - next = strm->next_out; - avail = strm->avail_out; - strm->next_out = (Bytef *)dictionary + dictLength; - strm->avail_out = 0; - ret = updatewindow(strm, dictLength); - strm->avail_out = avail; - strm->next_out = next; - if (ret) { - state->mode = MEM; - return Z_MEM_ERROR; - } - state->havedict = 1; - Tracev((stderr, "inflate: dictionary set\n")); - return Z_OK; -} - -int ZEXPORT inflateGetHeader(strm, head) -z_streamp strm; -gz_headerp head; -{ - struct inflate_state FAR *state; - - /* check state */ - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - state = (struct inflate_state FAR *)strm->state; - if ((state->wrap & 2) == 0) return Z_STREAM_ERROR; - - /* save header structure */ - state->head = head; - head->done = 0; - return Z_OK; -} - -/* - Search buf[0..len-1] for the pattern: 0, 0, 0xff, 0xff. Return when found - or when out of input. When called, *have is the number of pattern bytes - found in order so far, in 0..3. On return *have is updated to the new - state. If on return *have equals four, then the pattern was found and the - return value is how many bytes were read including the last byte of the - pattern. If *have is less than four, then the pattern has not been found - yet and the return value is len. In the latter case, syncsearch() can be - called again with more data and the *have state. *have is initialized to - zero for the first call. - */ -local unsigned syncsearch(have, buf, len) -unsigned FAR *have; -unsigned char FAR *buf; -unsigned len; -{ - unsigned got; - unsigned next; - - got = *have; - next = 0; - while (next < len && got < 4) { - if ((int)(buf[next]) == (got < 2 ? 0 : 0xff)) - got++; - else if (buf[next]) - got = 0; - else - got = 4 - got; - next++; - } - *have = got; - return next; -} - -int ZEXPORT inflateSync(strm) -z_streamp strm; -{ - unsigned len; /* number of bytes to look at or looked at */ - unsigned long in, out; /* temporary to save total_in and total_out */ - unsigned char buf[4]; /* to restore bit buffer to byte string */ - struct inflate_state FAR *state; - - /* check parameters */ - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - state = (struct inflate_state FAR *)strm->state; - if (strm->avail_in == 0 && state->bits < 8) return Z_BUF_ERROR; - - /* if first time, start search in bit buffer */ - if (state->mode != SYNC) { - state->mode = SYNC; - state->hold <<= state->bits & 7; - state->bits -= state->bits & 7; - len = 0; - while (state->bits >= 8) { - buf[len++] = (unsigned char)(state->hold); - state->hold >>= 8; - state->bits -= 8; - } - state->have = 0; - syncsearch(&(state->have), buf, len); - } - - /* search available input */ - len = syncsearch(&(state->have), strm->next_in, strm->avail_in); - strm->avail_in -= len; - strm->next_in += len; - strm->total_in += len; - - /* return no joy or set up to restart inflate() on a new block */ - if (state->have != 4) return Z_DATA_ERROR; - in = strm->total_in; out = strm->total_out; - inflateReset(strm); - strm->total_in = in; strm->total_out = out; - state->mode = TYPE; - return Z_OK; -} - -/* - Returns true if inflate is currently at the end of a block generated by - Z_SYNC_FLUSH or Z_FULL_FLUSH. This function is used by one PPP - implementation to provide an additional safety check. PPP uses - Z_SYNC_FLUSH but removes the length bytes of the resulting empty stored - block. When decompressing, PPP checks that at the end of input packet, - inflate is waiting for these length bytes. - */ -int ZEXPORT inflateSyncPoint(strm) -z_streamp strm; -{ - struct inflate_state FAR *state; - - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - state = (struct inflate_state FAR *)strm->state; - return state->mode == STORED && state->bits == 0; -} - -int ZEXPORT inflateCopy(dest, source) -z_streamp dest; -z_streamp source; -{ - struct inflate_state FAR *state; - struct inflate_state FAR *copy; - unsigned char FAR *window; - unsigned wsize; - - /* check input */ - if (dest == Z_NULL || source == Z_NULL || source->state == Z_NULL || - source->zalloc == (alloc_func)0 || source->zfree == (free_func)0) - return Z_STREAM_ERROR; - state = (struct inflate_state FAR *)source->state; - - /* allocate space */ - copy = (struct inflate_state FAR *) - ZALLOC(source, 1, sizeof(struct inflate_state)); - if (copy == Z_NULL) return Z_MEM_ERROR; - window = Z_NULL; - if (state->window != Z_NULL) { - window = (unsigned char FAR *) - ZALLOC(source, 1U << state->wbits, sizeof(unsigned char)); - if (window == Z_NULL) { - ZFREE(source, copy); - return Z_MEM_ERROR; - } - } - - /* copy state */ - zmemcpy((voidpf)dest, (voidpf)source, sizeof(z_stream)); - zmemcpy((voidpf)copy, (voidpf)state, sizeof(struct inflate_state)); - if (state->lencode >= state->codes && - state->lencode <= state->codes + ENOUGH - 1) { - copy->lencode = copy->codes + (state->lencode - state->codes); - copy->distcode = copy->codes + (state->distcode - state->codes); - } - copy->next = copy->codes + (state->next - state->codes); - if (window != Z_NULL) { - wsize = 1U << state->wbits; - zmemcpy(window, state->window, wsize); - } - copy->window = window; - dest->state = (struct internal_state FAR *)copy; - return Z_OK; -} - -int ZEXPORT inflateUndermine(strm, subvert) -z_streamp strm; -int subvert; -{ - struct inflate_state FAR *state; - - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - state = (struct inflate_state FAR *)strm->state; - state->sane = !subvert; -#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR - return Z_OK; -#else - state->sane = 1; - return Z_DATA_ERROR; -#endif -} - -long ZEXPORT inflateMark(strm) -z_streamp strm; -{ - struct inflate_state FAR *state; - - if (strm == Z_NULL || strm->state == Z_NULL) return -1L << 16; - state = (struct inflate_state FAR *)strm->state; - return ((long)(state->back) << 16) + - (state->mode == COPY ? state->length : - (state->mode == MATCH ? state->was - state->length : 0)); -} diff --git a/sdk-modifications/libsrc/zlib/inflate.h b/sdk-modifications/libsrc/zlib/inflate.h deleted file mode 100755 index 95f4986..0000000 --- a/sdk-modifications/libsrc/zlib/inflate.h +++ /dev/null @@ -1,122 +0,0 @@ -/* inflate.h -- internal inflate state definition - * Copyright (C) 1995-2009 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -/* define NO_GZIP when compiling if you want to disable gzip header and - trailer decoding by inflate(). NO_GZIP would be used to avoid linking in - the crc code when it is not needed. For shared libraries, gzip decoding - should be left enabled. */ -#ifndef NO_GZIP -# define GUNZIP -#endif - -/* Possible inflate modes between inflate() calls */ -typedef enum { - HEAD, /* i: waiting for magic header */ - FLAGS, /* i: waiting for method and flags (gzip) */ - TIME, /* i: waiting for modification time (gzip) */ - OS, /* i: waiting for extra flags and operating system (gzip) */ - EXLEN, /* i: waiting for extra length (gzip) */ - EXTRA, /* i: waiting for extra bytes (gzip) */ - NAME, /* i: waiting for end of file name (gzip) */ - COMMENT, /* i: waiting for end of comment (gzip) */ - HCRC, /* i: waiting for header crc (gzip) */ - DICTID, /* i: waiting for dictionary check value */ - DICT, /* waiting for inflateSetDictionary() call */ - TYPE, /* i: waiting for type bits, including last-flag bit */ - TYPEDO, /* i: same, but skip check to exit inflate on new block */ - STORED, /* i: waiting for stored size (length and complement) */ - COPY_, /* i/o: same as COPY below, but only first time in */ - COPY, /* i/o: waiting for input or output to copy stored block */ - TABLE, /* i: waiting for dynamic block table lengths */ - LENLENS, /* i: waiting for code length code lengths */ - CODELENS, /* i: waiting for length/lit and distance code lengths */ - LEN_, /* i: same as LEN below, but only first time in */ - LEN, /* i: waiting for length/lit/eob code */ - LENEXT, /* i: waiting for length extra bits */ - DIST, /* i: waiting for distance code */ - DISTEXT, /* i: waiting for distance extra bits */ - MATCH, /* o: waiting for output space to copy string */ - LIT, /* o: waiting for output space to write literal */ - CHECK, /* i: waiting for 32-bit check value */ - LENGTH, /* i: waiting for 32-bit length (gzip) */ - DONE, /* finished check, done -- remain here until reset */ - BAD, /* got a data error -- remain here until reset */ - MEM, /* got an inflate() memory error -- remain here until reset */ - SYNC /* looking for synchronization bytes to restart inflate() */ -} inflate_mode; - -/* - State transitions between above modes - - - (most modes can go to BAD or MEM on error -- not shown for clarity) - - Process header: - HEAD -> (gzip) or (zlib) or (raw) - (gzip) -> FLAGS -> TIME -> OS -> EXLEN -> EXTRA -> NAME -> COMMENT -> - HCRC -> TYPE - (zlib) -> DICTID or TYPE - DICTID -> DICT -> TYPE - (raw) -> TYPEDO - Read deflate blocks: - TYPE -> TYPEDO -> STORED or TABLE or LEN_ or CHECK - STORED -> COPY_ -> COPY -> TYPE - TABLE -> LENLENS -> CODELENS -> LEN_ - LEN_ -> LEN - Read deflate codes in fixed or dynamic block: - LEN -> LENEXT or LIT or TYPE - LENEXT -> DIST -> DISTEXT -> MATCH -> LEN - LIT -> LEN - Process trailer: - CHECK -> LENGTH -> DONE - */ - -/* state maintained between inflate() calls. Approximately 10K bytes. */ -struct inflate_state { - inflate_mode mode; /* current inflate mode */ - int last; /* true if processing last block */ - int wrap; /* bit 0 true for zlib, bit 1 true for gzip */ - int havedict; /* true if dictionary provided */ - int flags; /* gzip header method and flags (0 if zlib) */ - unsigned dmax; /* zlib header max distance (INFLATE_STRICT) */ - unsigned long check; /* protected copy of check value */ - unsigned long total; /* protected copy of output count */ - gz_headerp head; /* where to save gzip header information */ - /* sliding window */ - unsigned wbits; /* log base 2 of requested window size */ - unsigned wsize; /* window size or zero if not using window */ - unsigned whave; /* valid bytes in the window */ - unsigned wnext; /* window write index */ - unsigned char FAR *window; /* allocated sliding window, if needed */ - /* bit accumulator */ - unsigned long hold; /* input bit accumulator */ - unsigned bits; /* number of bits in "in" */ - /* for string and stored block copying */ - unsigned length; /* literal or length of data to copy */ - unsigned offset; /* distance back to copy string from */ - /* for table and code decoding */ - unsigned extra; /* extra bits needed */ - /* fixed and dynamic code tables */ - code const FAR *lencode; /* starting table for length/literal codes */ - code const FAR *distcode; /* starting table for distance codes */ - unsigned lenbits; /* index bits for lencode */ - unsigned distbits; /* index bits for distcode */ - /* dynamic table building */ - unsigned ncode; /* number of code length code lengths */ - unsigned nlen; /* number of length code lengths */ - unsigned ndist; /* number of distance code lengths */ - unsigned have; /* number of code lengths in lens[] */ - code FAR *next; /* next available space in codes[] */ - unsigned short lens[320]; /* temporary storage for code lengths */ - unsigned short work[288]; /* work area for code table building */ - code codes[ENOUGH]; /* space for code tables */ - int sane; /* if false, allow invalid distance too far */ - int back; /* bits back of last unprocessed length/lit */ - unsigned was; /* initial length of match */ -}; diff --git a/sdk-modifications/libsrc/zlib/inftrees.c b/sdk-modifications/libsrc/zlib/inftrees.c deleted file mode 100755 index 60bbd58..0000000 --- a/sdk-modifications/libsrc/zlib/inftrees.c +++ /dev/null @@ -1,306 +0,0 @@ -/* inftrees.c -- generate Huffman trees for efficient decoding - * Copyright (C) 1995-2012 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#include "zutil.h" -#include "inftrees.h" - -#define MAXBITS 15 - -const char inflate_copyright[] = - " inflate 1.2.6 Copyright 1995-2012 Mark Adler "; -/* - If you use the zlib library in a product, an acknowledgment is welcome - in the documentation of your product. If for some reason you cannot - include such an acknowledgment, I would appreciate that you keep this - copyright string in the executable of your product. - */ - -/* - Build a set of tables to decode the provided canonical Huffman code. - The code lengths are lens[0..codes-1]. The result starts at *table, - whose indices are 0..2^bits-1. work is a writable array of at least - lens shorts, which is used as a work area. type is the type of code - to be generated, CODES, LENS, or DISTS. On return, zero is success, - -1 is an invalid code, and +1 means that ENOUGH isn't enough. table - on return points to the next available entry's address. bits is the - requested root table index bits, and on return it is the actual root - table index bits. It will differ if the request is greater than the - longest code or if it is less than the shortest code. - */ -int ZLIB_INTERNAL inflate_table(type, lens, codes, table, bits, work) -codetype type; -unsigned short FAR *lens; -unsigned codes; -code FAR * FAR *table; -unsigned FAR *bits; -unsigned short FAR *work; -{ - unsigned len; /* a code's length in bits */ - unsigned sym; /* index of code symbols */ - unsigned min, max; /* minimum and maximum code lengths */ - unsigned root; /* number of index bits for root table */ - unsigned curr; /* number of index bits for current table */ - unsigned drop; /* code bits to drop for sub-table */ - int left; /* number of prefix codes available */ - unsigned used; /* code entries in table used */ - unsigned huff; /* Huffman code */ - unsigned incr; /* for incrementing code, index */ - unsigned fill; /* index for replicating entries */ - unsigned low; /* low bits for current root entry */ - unsigned mask; /* mask for low root bits */ - code here; /* table entry for duplication */ - code FAR *next; /* next available space in table */ - const unsigned short FAR *base; /* base value table to use */ - const unsigned short FAR *extra; /* extra bits table to use */ - int end; /* use base and extra for symbol > end */ - unsigned short count[MAXBITS+1]; /* number of codes of each length */ - unsigned short offs[MAXBITS+1]; /* offsets in table for each length */ - static const unsigned short lbase[31] = { /* Length codes 257..285 base */ - 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31, - 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0}; - static const unsigned short lext[31] = { /* Length codes 257..285 extra */ - 16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18, - 19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 203, 69}; - static const unsigned short dbase[32] = { /* Distance codes 0..29 base */ - 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193, - 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145, - 8193, 12289, 16385, 24577, 0, 0}; - static const unsigned short dext[32] = { /* Distance codes 0..29 extra */ - 16, 16, 16, 16, 17, 17, 18, 18, 19, 19, 20, 20, 21, 21, 22, 22, - 23, 23, 24, 24, 25, 25, 26, 26, 27, 27, - 28, 28, 29, 29, 64, 64}; - - /* - Process a set of code lengths to create a canonical Huffman code. The - code lengths are lens[0..codes-1]. Each length corresponds to the - symbols 0..codes-1. The Huffman code is generated by first sorting the - symbols by length from short to long, and retaining the symbol order - for codes with equal lengths. Then the code starts with all zero bits - for the first code of the shortest length, and the codes are integer - increments for the same length, and zeros are appended as the length - increases. For the deflate format, these bits are stored backwards - from their more natural integer increment ordering, and so when the - decoding tables are built in the large loop below, the integer codes - are incremented backwards. - - This routine assumes, but does not check, that all of the entries in - lens[] are in the range 0..MAXBITS. The caller must assure this. - 1..MAXBITS is interpreted as that code length. zero means that that - symbol does not occur in this code. - - The codes are sorted by computing a count of codes for each length, - creating from that a table of starting indices for each length in the - sorted table, and then entering the symbols in order in the sorted - table. The sorted table is work[], with that space being provided by - the caller. - - The length counts are used for other purposes as well, i.e. finding - the minimum and maximum length codes, determining if there are any - codes at all, checking for a valid set of lengths, and looking ahead - at length counts to determine sub-table sizes when building the - decoding tables. - */ - - /* accumulate lengths for codes (assumes lens[] all in 0..MAXBITS) */ - for (len = 0; len <= MAXBITS; len++) - count[len] = 0; - for (sym = 0; sym < codes; sym++) - count[lens[sym]]++; - - /* bound code lengths, force root to be within code lengths */ - root = *bits; - for (max = MAXBITS; max >= 1; max--) - if (count[max] != 0) break; - if (root > max) root = max; - if (max == 0) { /* no symbols to code at all */ - here.op = (unsigned char)64; /* invalid code marker */ - here.bits = (unsigned char)1; - here.val = (unsigned short)0; - *(*table)++ = here; /* make a table to force an error */ - *(*table)++ = here; - *bits = 1; - return 0; /* no symbols, but wait for decoding to report error */ - } - for (min = 1; min < max; min++) - if (count[min] != 0) break; - if (root < min) root = min; - - /* check for an over-subscribed or incomplete set of lengths */ - left = 1; - for (len = 1; len <= MAXBITS; len++) { - left <<= 1; - left -= count[len]; - if (left < 0) return -1; /* over-subscribed */ - } - if (left > 0 && (type == CODES || max != 1)) - return -1; /* incomplete set */ - - /* generate offsets into symbol table for each length for sorting */ - offs[1] = 0; - for (len = 1; len < MAXBITS; len++) - offs[len + 1] = offs[len] + count[len]; - - /* sort symbols by length, by symbol order within each length */ - for (sym = 0; sym < codes; sym++) - if (lens[sym] != 0) work[offs[lens[sym]]++] = (unsigned short)sym; - - /* - Create and fill in decoding tables. In this loop, the table being - filled is at next and has curr index bits. The code being used is huff - with length len. That code is converted to an index by dropping drop - bits off of the bottom. For codes where len is less than drop + curr, - those top drop + curr - len bits are incremented through all values to - fill the table with replicated entries. - - root is the number of index bits for the root table. When len exceeds - root, sub-tables are created pointed to by the root entry with an index - of the low root bits of huff. This is saved in low to check for when a - new sub-table should be started. drop is zero when the root table is - being filled, and drop is root when sub-tables are being filled. - - When a new sub-table is needed, it is necessary to look ahead in the - code lengths to determine what size sub-table is needed. The length - counts are used for this, and so count[] is decremented as codes are - entered in the tables. - - used keeps track of how many table entries have been allocated from the - provided *table space. It is checked for LENS and DIST tables against - the constants ENOUGH_LENS and ENOUGH_DISTS to guard against changes in - the initial root table size constants. See the comments in inftrees.h - for more information. - - sym increments through all symbols, and the loop terminates when - all codes of length max, i.e. all codes, have been processed. This - routine permits incomplete codes, so another loop after this one fills - in the rest of the decoding tables with invalid code markers. - */ - - /* set up for code type */ - switch (type) { - case CODES: - base = extra = work; /* dummy value--not used */ - end = 19; - break; - case LENS: - base = lbase; - base -= 257; - extra = lext; - extra -= 257; - end = 256; - break; - default: /* DISTS */ - base = dbase; - extra = dext; - end = -1; - } - - /* initialize state for loop */ - huff = 0; /* starting code */ - sym = 0; /* starting code symbol */ - len = min; /* starting code length */ - next = *table; /* current table to fill in */ - curr = root; /* current table index bits */ - drop = 0; /* current bits to drop from code for index */ - low = (unsigned)(-1); /* trigger new sub-table when len > root */ - used = 1U << root; /* use root table entries */ - mask = used - 1; /* mask for comparing low */ - - /* check available table space */ - if ((type == LENS && used >= ENOUGH_LENS) || - (type == DISTS && used >= ENOUGH_DISTS)) - return 1; - - /* process all codes and make table entries */ - for (;;) { - /* create table entry */ - here.bits = (unsigned char)(len - drop); - if ((int)(work[sym]) < end) { - here.op = (unsigned char)0; - here.val = work[sym]; - } - else if ((int)(work[sym]) > end) { - here.op = (unsigned char)(extra[work[sym]]); - here.val = base[work[sym]]; - } - else { - here.op = (unsigned char)(32 + 64); /* end of block */ - here.val = 0; - } - - /* replicate for those indices with low len bits equal to huff */ - incr = 1U << (len - drop); - fill = 1U << curr; - min = fill; /* save offset to next table */ - do { - fill -= incr; - next[(huff >> drop) + fill] = here; - } while (fill != 0); - - /* backwards increment the len-bit code huff */ - incr = 1U << (len - 1); - while (huff & incr) - incr >>= 1; - if (incr != 0) { - huff &= incr - 1; - huff += incr; - } - else - huff = 0; - - /* go to next symbol, update count, len */ - sym++; - if (--(count[len]) == 0) { - if (len == max) break; - len = lens[work[sym]]; - } - - /* create new sub-table if needed */ - if (len > root && (huff & mask) != low) { - /* if first time, transition to sub-tables */ - if (drop == 0) - drop = root; - - /* increment past last table */ - next += min; /* here min is 1 << curr */ - - /* determine length of next table */ - curr = len - drop; - left = (int)(1 << curr); - while (curr + drop < max) { - left -= count[curr + drop]; - if (left <= 0) break; - curr++; - left <<= 1; - } - - /* check for enough space */ - used += 1U << curr; - if ((type == LENS && used >= ENOUGH_LENS) || - (type == DISTS && used >= ENOUGH_DISTS)) - return 1; - - /* point entry in root table to sub-table */ - low = huff & mask; - (*table)[low].op = (unsigned char)curr; - (*table)[low].bits = (unsigned char)root; - (*table)[low].val = (unsigned short)(next - *table); - } - } - - /* fill in remaining table entry if code is incomplete (guaranteed to have - at most one remaining entry, since if the code is incomplete, the - maximum code length that was allowed to get this far is one bit) */ - if (huff != 0) { - here.op = (unsigned char)64; /* invalid code marker */ - here.bits = (unsigned char)(len - drop); - here.val = (unsigned short)0; - next[huff] = here; - } - - /* set return parameters */ - *table += used; - *bits = root; - return 0; -} diff --git a/sdk-modifications/libsrc/zlib/inftrees.h b/sdk-modifications/libsrc/zlib/inftrees.h deleted file mode 100755 index baa53a0..0000000 --- a/sdk-modifications/libsrc/zlib/inftrees.h +++ /dev/null @@ -1,62 +0,0 @@ -/* inftrees.h -- header to use inftrees.c - * Copyright (C) 1995-2005, 2010 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -/* Structure for decoding tables. Each entry provides either the - information needed to do the operation requested by the code that - indexed that table entry, or it provides a pointer to another - table that indexes more bits of the code. op indicates whether - the entry is a pointer to another table, a literal, a length or - distance, an end-of-block, or an invalid code. For a table - pointer, the low four bits of op is the number of index bits of - that table. For a length or distance, the low four bits of op - is the number of extra bits to get after the code. bits is - the number of bits in this code or part of the code to drop off - of the bit buffer. val is the actual byte to output in the case - of a literal, the base length or distance, or the offset from - the current table to the next table. Each entry is four bytes. */ -typedef struct { - unsigned char op; /* operation, extra bits, table bits */ - unsigned char bits; /* bits in this part of the code */ - unsigned short val; /* offset in table or code value */ -} code; - -/* op values as set by inflate_table(): - 00000000 - literal - 0000tttt - table link, tttt != 0 is the number of table index bits - 0001eeee - length or distance, eeee is the number of extra bits - 01100000 - end of block - 01000000 - invalid code - */ - -/* Maximum size of the dynamic table. The maximum number of code structures is - 1444, which is the sum of 852 for literal/length codes and 592 for distance - codes. These values were found by exhaustive searches using the program - examples/enough.c found in the zlib distribtution. The arguments to that - program are the number of symbols, the initial root table size, and the - maximum bit length of a code. "enough 286 9 15" for literal/length codes - returns returns 852, and "enough 30 6 15" for distance codes returns 592. - The initial root table size (9 or 6) is found in the fifth argument of the - inflate_table() calls in inflate.c and infback.c. If the root table size is - changed, then these maximum sizes would be need to be recalculated and - updated. */ -#define ENOUGH_LENS 852 -#define ENOUGH_DISTS 592 -#define ENOUGH (ENOUGH_LENS+ENOUGH_DISTS) - -/* Type of code to build for inflate_table() */ -typedef enum { - CODES, - LENS, - DISTS -} codetype; - -int ZLIB_INTERNAL inflate_table OF((codetype type, unsigned short FAR *lens, - unsigned codes, code FAR * FAR *table, - unsigned FAR *bits, unsigned short FAR *work)); diff --git a/sdk-modifications/libsrc/zlib/trees.c b/sdk-modifications/libsrc/zlib/trees.c deleted file mode 100755 index 8c32b21..0000000 --- a/sdk-modifications/libsrc/zlib/trees.c +++ /dev/null @@ -1,1224 +0,0 @@ -/* trees.c -- output deflated data using Huffman coding - * Copyright (C) 1995-2012 Jean-loup Gailly - * detect_data_type() function provided freely by Cosmin Truta, 2006 - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* - * ALGORITHM - * - * The "deflation" process uses several Huffman trees. The more - * common source values are represented by shorter bit sequences. - * - * Each code tree is stored in a compressed form which is itself - * a Huffman encoding of the lengths of all the code strings (in - * ascending order by source values). The actual code strings are - * reconstructed from the lengths in the inflate process, as described - * in the deflate specification. - * - * REFERENCES - * - * Deutsch, L.P.,"'Deflate' Compressed Data Format Specification". - * Available in ftp.uu.net:/pub/archiving/zip/doc/deflate-1.1.doc - * - * Storer, James A. - * Data Compression: Methods and Theory, pp. 49-50. - * Computer Science Press, 1988. ISBN 0-7167-8156-5. - * - * Sedgewick, R. - * Algorithms, p290. - * Addison-Wesley, 1983. ISBN 0-201-06672-6. - */ - -/* @(#) $Id$ */ - -/* #define GEN_TREES_H */ - -#include "deflate.h" - -#ifdef DEBUG -# include <ctype.h> -#endif - -/* =========================================================================== - * Constants - */ - -#define MAX_BL_BITS 7 -/* Bit length codes must not exceed MAX_BL_BITS bits */ - -#define END_BLOCK 256 -/* end of block literal code */ - -#define REP_3_6 16 -/* repeat previous bit length 3-6 times (2 bits of repeat count) */ - -#define REPZ_3_10 17 -/* repeat a zero length 3-10 times (3 bits of repeat count) */ - -#define REPZ_11_138 18 -/* repeat a zero length 11-138 times (7 bits of repeat count) */ - -local const int extra_lbits[LENGTH_CODES] /* extra bits for each length code */ - = {0,0,0,0,0,0,0,0,1,1,1,1,2,2,2,2,3,3,3,3,4,4,4,4,5,5,5,5,0}; - -local const int extra_dbits[D_CODES] /* extra bits for each distance code */ - = {0,0,0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,13,13}; - -local const int extra_blbits[BL_CODES]/* extra bits for each bit length code */ - = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,3,7}; - -local const uch bl_order[BL_CODES] - = {16,17,18,0,8,7,9,6,10,5,11,4,12,3,13,2,14,1,15}; -/* The lengths of the bit length codes are sent in order of decreasing - * probability, to avoid transmitting the lengths for unused bit length codes. - */ - -/* =========================================================================== - * Local data. These are initialized only once. - */ - -#define DIST_CODE_LEN 512 /* see definition of array dist_code below */ - -#if defined(GEN_TREES_H) || !defined(STDC) -/* non ANSI compilers may not accept trees.h */ - -local ct_data static_ltree[L_CODES+2]; -/* The static literal tree. Since the bit lengths are imposed, there is no - * need for the L_CODES extra codes used during heap construction. However - * The codes 286 and 287 are needed to build a canonical tree (see _tr_init - * below). - */ - -local ct_data static_dtree[D_CODES]; -/* The static distance tree. (Actually a trivial tree since all codes use - * 5 bits.) - */ - -uch _dist_code[DIST_CODE_LEN]; -/* Distance codes. The first 256 values correspond to the distances - * 3 .. 258, the last 256 values correspond to the top 8 bits of - * the 15 bit distances. - */ - -uch _length_code[MAX_MATCH-MIN_MATCH+1]; -/* length code for each normalized match length (0 == MIN_MATCH) */ - -local int base_length[LENGTH_CODES]; -/* First normalized length for each code (0 = MIN_MATCH) */ - -local int base_dist[D_CODES]; -/* First normalized distance for each code (0 = distance of 1) */ - -#else -# include "trees.h" -#endif /* GEN_TREES_H */ - -struct static_tree_desc_s { - const ct_data *static_tree; /* static tree or NULL */ - const intf *extra_bits; /* extra bits for each code or NULL */ - int extra_base; /* base index for extra_bits */ - int elems; /* max number of elements in the tree */ - int max_length; /* max bit length for the codes */ -}; - -local static_tree_desc static_l_desc = -{static_ltree, extra_lbits, LITERALS+1, L_CODES, MAX_BITS}; - -local static_tree_desc static_d_desc = -{static_dtree, extra_dbits, 0, D_CODES, MAX_BITS}; - -local static_tree_desc static_bl_desc = -{(const ct_data *)0, extra_blbits, 0, BL_CODES, MAX_BL_BITS}; - -/* =========================================================================== - * Local (static) routines in this file. - */ - -local void tr_static_init OF((void)); -local void init_block OF((deflate_state *s)); -local void pqdownheap OF((deflate_state *s, ct_data *tree, int k)); -local void gen_bitlen OF((deflate_state *s, tree_desc *desc)); -local void gen_codes OF((ct_data *tree, int max_code, ushf *bl_count)); -local void build_tree OF((deflate_state *s, tree_desc *desc)); -local void scan_tree OF((deflate_state *s, ct_data *tree, int max_code)); -local void send_tree OF((deflate_state *s, ct_data *tree, int max_code)); -local int build_bl_tree OF((deflate_state *s)); -local void send_all_trees OF((deflate_state *s, int lcodes, int dcodes, - int blcodes)); -local void compress_block OF((deflate_state *s, ct_data *ltree, - ct_data *dtree)); -local int detect_data_type OF((deflate_state *s)); -local unsigned bi_reverse OF((unsigned value, int length)); -local void bi_windup OF((deflate_state *s)); -local void bi_flush OF((deflate_state *s)); -local void copy_block OF((deflate_state *s, charf *buf, unsigned len, - int header)); - -#ifdef GEN_TREES_H -local void gen_trees_header OF((void)); -#endif - -#ifndef DEBUG -# define send_code(s, c, tree) send_bits(s, tree[c].Code, tree[c].Len) - /* Send a code of the given tree. c and tree must not have side effects */ - -#else /* DEBUG */ -# define send_code(s, c, tree) \ - { if (z_verbose>2) fprintf(stderr,"\ncd %3d ",(c)); \ - send_bits(s, tree[c].Code, tree[c].Len); } -#endif - -/* =========================================================================== - * Output a short LSB first on the stream. - * IN assertion: there is enough room in pendingBuf. - */ -#define put_short(s, w) { \ - put_byte(s, (uch)((w) & 0xff)); \ - put_byte(s, (uch)((ush)(w) >> 8)); \ -} - -/* =========================================================================== - * Send a value on a given number of bits. - * IN assertion: length <= 16 and value fits in length bits. - */ -#ifdef DEBUG -local void send_bits OF((deflate_state *s, int value, int length)); - -local void send_bits(s, value, length) - deflate_state *s; - int value; /* value to send */ - int length; /* number of bits */ -{ - Tracevv((stderr," l %2d v %4x ", length, value)); - Assert(length > 0 && length <= 15, "invalid length"); - s->bits_sent += (ulg)length; - - /* If not enough room in bi_buf, use (valid) bits from bi_buf and - * (16 - bi_valid) bits from value, leaving (width - (16-bi_valid)) - * unused bits in value. - */ - if (s->bi_valid > (int)Buf_size - length) { - s->bi_buf |= (ush)value << s->bi_valid; - put_short(s, s->bi_buf); - s->bi_buf = (ush)value >> (Buf_size - s->bi_valid); - s->bi_valid += length - Buf_size; - } else { - s->bi_buf |= (ush)value << s->bi_valid; - s->bi_valid += length; - } -} -#else /* !DEBUG */ - -#define send_bits(s, value, length) \ -{ int len = length;\ - if (s->bi_valid > (int)Buf_size - len) {\ - int val = value;\ - s->bi_buf |= (ush)val << s->bi_valid;\ - put_short(s, s->bi_buf);\ - s->bi_buf = (ush)val >> (Buf_size - s->bi_valid);\ - s->bi_valid += len - Buf_size;\ - } else {\ - s->bi_buf |= (ush)(value) << s->bi_valid;\ - s->bi_valid += len;\ - }\ -} -#endif /* DEBUG */ - - -/* the arguments must not have side effects */ - -/* =========================================================================== - * Initialize the various 'constant' tables. - */ -local void tr_static_init() -{ -#if defined(GEN_TREES_H) || !defined(STDC) - static int static_init_done = 0; - int n; /* iterates over tree elements */ - int bits; /* bit counter */ - int length; /* length value */ - int code; /* code value */ - int dist; /* distance index */ - ush bl_count[MAX_BITS+1]; - /* number of codes at each bit length for an optimal tree */ - - if (static_init_done) return; - - /* For some embedded targets, global variables are not initialized: */ -#ifdef NO_INIT_GLOBAL_POINTERS - static_l_desc.static_tree = static_ltree; - static_l_desc.extra_bits = extra_lbits; - static_d_desc.static_tree = static_dtree; - static_d_desc.extra_bits = extra_dbits; - static_bl_desc.extra_bits = extra_blbits; -#endif - - /* Initialize the mapping length (0..255) -> length code (0..28) */ - length = 0; - for (code = 0; code < LENGTH_CODES-1; code++) { - base_length[code] = length; - for (n = 0; n < (1<<extra_lbits[code]); n++) { - _length_code[length++] = (uch)code; - } - } - Assert (length == 256, "tr_static_init: length != 256"); - /* Note that the length 255 (match length 258) can be represented - * in two different ways: code 284 + 5 bits or code 285, so we - * overwrite length_code[255] to use the best encoding: - */ - _length_code[length-1] = (uch)code; - - /* Initialize the mapping dist (0..32K) -> dist code (0..29) */ - dist = 0; - for (code = 0 ; code < 16; code++) { - base_dist[code] = dist; - for (n = 0; n < (1<<extra_dbits[code]); n++) { - _dist_code[dist++] = (uch)code; - } - } - Assert (dist == 256, "tr_static_init: dist != 256"); - dist >>= 7; /* from now on, all distances are divided by 128 */ - for ( ; code < D_CODES; code++) { - base_dist[code] = dist << 7; - for (n = 0; n < (1<<(extra_dbits[code]-7)); n++) { - _dist_code[256 + dist++] = (uch)code; - } - } - Assert (dist == 256, "tr_static_init: 256+dist != 512"); - - /* Construct the codes of the static literal tree */ - for (bits = 0; bits <= MAX_BITS; bits++) bl_count[bits] = 0; - n = 0; - while (n <= 143) static_ltree[n++].Len = 8, bl_count[8]++; - while (n <= 255) static_ltree[n++].Len = 9, bl_count[9]++; - while (n <= 279) static_ltree[n++].Len = 7, bl_count[7]++; - while (n <= 287) static_ltree[n++].Len = 8, bl_count[8]++; - /* Codes 286 and 287 do not exist, but we must include them in the - * tree construction to get a canonical Huffman tree (longest code - * all ones) - */ - gen_codes((ct_data *)static_ltree, L_CODES+1, bl_count); - - /* The static distance tree is trivial: */ - for (n = 0; n < D_CODES; n++) { - static_dtree[n].Len = 5; - static_dtree[n].Code = bi_reverse((unsigned)n, 5); - } - static_init_done = 1; - -# ifdef GEN_TREES_H - gen_trees_header(); -# endif -#endif /* defined(GEN_TREES_H) || !defined(STDC) */ -} - -/* =========================================================================== - * Genererate the file trees.h describing the static trees. - */ -#ifdef GEN_TREES_H -# ifndef DEBUG -# include <stdio.h> -# endif - -# define SEPARATOR(i, last, width) \ - ((i) == (last)? "\n};\n\n" : \ - ((i) % (width) == (width)-1 ? ",\n" : ", ")) - -void gen_trees_header() -{ - FILE *header = fopen("trees.h", "w"); - int i; - - Assert (header != NULL, "Can't open trees.h"); - fprintf(header, - "/* header created automatically with -DGEN_TREES_H */\n\n"); - - fprintf(header, "local const ct_data static_ltree[L_CODES+2] = {\n"); - for (i = 0; i < L_CODES+2; i++) { - fprintf(header, "{{%3u},{%3u}}%s", static_ltree[i].Code, - static_ltree[i].Len, SEPARATOR(i, L_CODES+1, 5)); - } - - fprintf(header, "local const ct_data static_dtree[D_CODES] = {\n"); - for (i = 0; i < D_CODES; i++) { - fprintf(header, "{{%2u},{%2u}}%s", static_dtree[i].Code, - static_dtree[i].Len, SEPARATOR(i, D_CODES-1, 5)); - } - - fprintf(header, "const uch ZLIB_INTERNAL _dist_code[DIST_CODE_LEN] = {\n"); - for (i = 0; i < DIST_CODE_LEN; i++) { - fprintf(header, "%2u%s", _dist_code[i], - SEPARATOR(i, DIST_CODE_LEN-1, 20)); - } - - fprintf(header, - "const uch ZLIB_INTERNAL _length_code[MAX_MATCH-MIN_MATCH+1]= {\n"); - for (i = 0; i < MAX_MATCH-MIN_MATCH+1; i++) { - fprintf(header, "%2u%s", _length_code[i], - SEPARATOR(i, MAX_MATCH-MIN_MATCH, 20)); - } - - fprintf(header, "local const int base_length[LENGTH_CODES] = {\n"); - for (i = 0; i < LENGTH_CODES; i++) { - fprintf(header, "%1u%s", base_length[i], - SEPARATOR(i, LENGTH_CODES-1, 20)); - } - - fprintf(header, "local const int base_dist[D_CODES] = {\n"); - for (i = 0; i < D_CODES; i++) { - fprintf(header, "%5u%s", base_dist[i], - SEPARATOR(i, D_CODES-1, 10)); - } - - fclose(header); -} -#endif /* GEN_TREES_H */ - -/* =========================================================================== - * Initialize the tree data structures for a new zlib stream. - */ -void ZLIB_INTERNAL _tr_init(s) - deflate_state *s; -{ - tr_static_init(); - - s->l_desc.dyn_tree = s->dyn_ltree; - s->l_desc.stat_desc = &static_l_desc; - - s->d_desc.dyn_tree = s->dyn_dtree; - s->d_desc.stat_desc = &static_d_desc; - - s->bl_desc.dyn_tree = s->bl_tree; - s->bl_desc.stat_desc = &static_bl_desc; - - s->bi_buf = 0; - s->bi_valid = 0; -#ifdef DEBUG - s->compressed_len = 0L; - s->bits_sent = 0L; -#endif - - /* Initialize the first block of the first file: */ - init_block(s); -} - -/* =========================================================================== - * Initialize a new block. - */ -local void init_block(s) - deflate_state *s; -{ - int n; /* iterates over tree elements */ - - /* Initialize the trees. */ - for (n = 0; n < L_CODES; n++) s->dyn_ltree[n].Freq = 0; - for (n = 0; n < D_CODES; n++) s->dyn_dtree[n].Freq = 0; - for (n = 0; n < BL_CODES; n++) s->bl_tree[n].Freq = 0; - - s->dyn_ltree[END_BLOCK].Freq = 1; - s->opt_len = s->static_len = 0L; - s->last_lit = s->matches = 0; -} - -#define SMALLEST 1 -/* Index within the heap array of least frequent node in the Huffman tree */ - - -/* =========================================================================== - * Remove the smallest element from the heap and recreate the heap with - * one less element. Updates heap and heap_len. - */ -#define pqremove(s, tree, top) \ -{\ - top = s->heap[SMALLEST]; \ - s->heap[SMALLEST] = s->heap[s->heap_len--]; \ - pqdownheap(s, tree, SMALLEST); \ -} - -/* =========================================================================== - * Compares to subtrees, using the tree depth as tie breaker when - * the subtrees have equal frequency. This minimizes the worst case length. - */ -#define smaller(tree, n, m, depth) \ - (tree[n].Freq < tree[m].Freq || \ - (tree[n].Freq == tree[m].Freq && depth[n] <= depth[m])) - -/* =========================================================================== - * Restore the heap property by moving down the tree starting at node k, - * exchanging a node with the smallest of its two sons if necessary, stopping - * when the heap property is re-established (each father smaller than its - * two sons). - */ -local void pqdownheap(s, tree, k) - deflate_state *s; - ct_data *tree; /* the tree to restore */ - int k; /* node to move down */ -{ - int v = s->heap[k]; - int j = k << 1; /* left son of k */ - while (j <= s->heap_len) { - /* Set j to the smallest of the two sons: */ - if (j < s->heap_len && - smaller(tree, s->heap[j+1], s->heap[j], s->depth)) { - j++; - } - /* Exit if v is smaller than both sons */ - if (smaller(tree, v, s->heap[j], s->depth)) break; - - /* Exchange v with the smallest son */ - s->heap[k] = s->heap[j]; k = j; - - /* And continue down the tree, setting j to the left son of k */ - j <<= 1; - } - s->heap[k] = v; -} - -/* =========================================================================== - * Compute the optimal bit lengths for a tree and update the total bit length - * for the current block. - * IN assertion: the fields freq and dad are set, heap[heap_max] and - * above are the tree nodes sorted by increasing frequency. - * OUT assertions: the field len is set to the optimal bit length, the - * array bl_count contains the frequencies for each bit length. - * The length opt_len is updated; static_len is also updated if stree is - * not null. - */ -local void gen_bitlen(s, desc) - deflate_state *s; - tree_desc *desc; /* the tree descriptor */ -{ - ct_data *tree = desc->dyn_tree; - int max_code = desc->max_code; - const ct_data *stree = desc->stat_desc->static_tree; - const intf *extra = desc->stat_desc->extra_bits; - int base = desc->stat_desc->extra_base; - int max_length = desc->stat_desc->max_length; - int h; /* heap index */ - int n, m; /* iterate over the tree elements */ - int bits; /* bit length */ - int xbits; /* extra bits */ - ush f; /* frequency */ - int overflow = 0; /* number of elements with bit length too large */ - - for (bits = 0; bits <= MAX_BITS; bits++) s->bl_count[bits] = 0; - - /* In a first pass, compute the optimal bit lengths (which may - * overflow in the case of the bit length tree). - */ - tree[s->heap[s->heap_max]].Len = 0; /* root of the heap */ - - for (h = s->heap_max+1; h < HEAP_SIZE; h++) { - n = s->heap[h]; - bits = tree[tree[n].Dad].Len + 1; - if (bits > max_length) bits = max_length, overflow++; - tree[n].Len = (ush)bits; - /* We overwrite tree[n].Dad which is no longer needed */ - - if (n > max_code) continue; /* not a leaf node */ - - s->bl_count[bits]++; - xbits = 0; - if (n >= base) xbits = extra[n-base]; - f = tree[n].Freq; - s->opt_len += (ulg)f * (bits + xbits); - if (stree) s->static_len += (ulg)f * (stree[n].Len + xbits); - } - if (overflow == 0) return; - - Trace((stderr,"\nbit length overflow\n")); - /* This happens for example on obj2 and pic of the Calgary corpus */ - - /* Find the first bit length which could increase: */ - do { - bits = max_length-1; - while (s->bl_count[bits] == 0) bits--; - s->bl_count[bits]--; /* move one leaf down the tree */ - s->bl_count[bits+1] += 2; /* move one overflow item as its brother */ - s->bl_count[max_length]--; - /* The brother of the overflow item also moves one step up, - * but this does not affect bl_count[max_length] - */ - overflow -= 2; - } while (overflow > 0); - - /* Now recompute all bit lengths, scanning in increasing frequency. - * h is still equal to HEAP_SIZE. (It is simpler to reconstruct all - * lengths instead of fixing only the wrong ones. This idea is taken - * from 'ar' written by Haruhiko Okumura.) - */ - for (bits = max_length; bits != 0; bits--) { - n = s->bl_count[bits]; - while (n != 0) { - m = s->heap[--h]; - if (m > max_code) continue; - if ((unsigned) tree[m].Len != (unsigned) bits) { - Trace((stderr,"code %d bits %d->%d\n", m, tree[m].Len, bits)); - s->opt_len += ((long)bits - (long)tree[m].Len) - *(long)tree[m].Freq; - tree[m].Len = (ush)bits; - } - n--; - } - } -} - -/* =========================================================================== - * Generate the codes for a given tree and bit counts (which need not be - * optimal). - * IN assertion: the array bl_count contains the bit length statistics for - * the given tree and the field len is set for all tree elements. - * OUT assertion: the field code is set for all tree elements of non - * zero code length. - */ -local void gen_codes (tree, max_code, bl_count) - ct_data *tree; /* the tree to decorate */ - int max_code; /* largest code with non zero frequency */ - ushf *bl_count; /* number of codes at each bit length */ -{ - ush next_code[MAX_BITS+1]; /* next code value for each bit length */ - ush code = 0; /* running code value */ - int bits; /* bit index */ - int n; /* code index */ - - /* The distribution counts are first used to generate the code values - * without bit reversal. - */ - for (bits = 1; bits <= MAX_BITS; bits++) { - next_code[bits] = code = (code + bl_count[bits-1]) << 1; - } - /* Check that the bit counts in bl_count are consistent. The last code - * must be all ones. - */ - Assert (code + bl_count[MAX_BITS]-1 == (1<<MAX_BITS)-1, - "inconsistent bit counts"); - Tracev((stderr,"\ngen_codes: max_code %d ", max_code)); - - for (n = 0; n <= max_code; n++) { - int len = tree[n].Len; - if (len == 0) continue; - /* Now reverse the bits */ - tree[n].Code = bi_reverse(next_code[len]++, len); - - Tracecv(tree != static_ltree, (stderr,"\nn %3d %c l %2d c %4x (%x) ", - n, (isgraph(n) ? n : ' '), len, tree[n].Code, next_code[len]-1)); - } -} - -/* =========================================================================== - * Construct one Huffman tree and assigns the code bit strings and lengths. - * Update the total bit length for the current block. - * IN assertion: the field freq is set for all tree elements. - * OUT assertions: the fields len and code are set to the optimal bit length - * and corresponding code. The length opt_len is updated; static_len is - * also updated if stree is not null. The field max_code is set. - */ -local void build_tree(s, desc) - deflate_state *s; - tree_desc *desc; /* the tree descriptor */ -{ - ct_data *tree = desc->dyn_tree; - const ct_data *stree = desc->stat_desc->static_tree; - int elems = desc->stat_desc->elems; - int n, m; /* iterate over heap elements */ - int max_code = -1; /* largest code with non zero frequency */ - int node; /* new node being created */ - - /* Construct the initial heap, with least frequent element in - * heap[SMALLEST]. The sons of heap[n] are heap[2*n] and heap[2*n+1]. - * heap[0] is not used. - */ - s->heap_len = 0, s->heap_max = HEAP_SIZE; - - for (n = 0; n < elems; n++) { - if (tree[n].Freq != 0) { - s->heap[++(s->heap_len)] = max_code = n; - s->depth[n] = 0; - } else { - tree[n].Len = 0; - } - } - - /* The pkzip format requires that at least one distance code exists, - * and that at least one bit should be sent even if there is only one - * possible code. So to avoid special checks later on we force at least - * two codes of non zero frequency. - */ - while (s->heap_len < 2) { - node = s->heap[++(s->heap_len)] = (max_code < 2 ? ++max_code : 0); - tree[node].Freq = 1; - s->depth[node] = 0; - s->opt_len--; if (stree) s->static_len -= stree[node].Len; - /* node is 0 or 1 so it does not have extra bits */ - } - desc->max_code = max_code; - - /* The elements heap[heap_len/2+1 .. heap_len] are leaves of the tree, - * establish sub-heaps of increasing lengths: - */ - for (n = s->heap_len/2; n >= 1; n--) pqdownheap(s, tree, n); - - /* Construct the Huffman tree by repeatedly combining the least two - * frequent nodes. - */ - node = elems; /* next internal node of the tree */ - do { - pqremove(s, tree, n); /* n = node of least frequency */ - m = s->heap[SMALLEST]; /* m = node of next least frequency */ - - s->heap[--(s->heap_max)] = n; /* keep the nodes sorted by frequency */ - s->heap[--(s->heap_max)] = m; - - /* Create a new node father of n and m */ - tree[node].Freq = tree[n].Freq + tree[m].Freq; - s->depth[node] = (uch)((s->depth[n] >= s->depth[m] ? - s->depth[n] : s->depth[m]) + 1); - tree[n].Dad = tree[m].Dad = (ush)node; -#ifdef DUMP_BL_TREE - if (tree == s->bl_tree) { - fprintf(stderr,"\nnode %d(%d), sons %d(%d) %d(%d)", - node, tree[node].Freq, n, tree[n].Freq, m, tree[m].Freq); - } -#endif - /* and insert the new node in the heap */ - s->heap[SMALLEST] = node++; - pqdownheap(s, tree, SMALLEST); - - } while (s->heap_len >= 2); - - s->heap[--(s->heap_max)] = s->heap[SMALLEST]; - - /* At this point, the fields freq and dad are set. We can now - * generate the bit lengths. - */ - gen_bitlen(s, (tree_desc *)desc); - - /* The field len is now set, we can generate the bit codes */ - gen_codes ((ct_data *)tree, max_code, s->bl_count); -} - -/* =========================================================================== - * Scan a literal or distance tree to determine the frequencies of the codes - * in the bit length tree. - */ -local void scan_tree (s, tree, max_code) - deflate_state *s; - ct_data *tree; /* the tree to be scanned */ - int max_code; /* and its largest code of non zero frequency */ -{ - int n; /* iterates over all tree elements */ - int prevlen = -1; /* last emitted length */ - int curlen; /* length of current code */ - int nextlen = tree[0].Len; /* length of next code */ - int count = 0; /* repeat count of the current code */ - int max_count = 7; /* max repeat count */ - int min_count = 4; /* min repeat count */ - - if (nextlen == 0) max_count = 138, min_count = 3; - tree[max_code+1].Len = (ush)0xffff; /* guard */ - - for (n = 0; n <= max_code; n++) { - curlen = nextlen; nextlen = tree[n+1].Len; - if (++count < max_count && curlen == nextlen) { - continue; - } else if (count < min_count) { - s->bl_tree[curlen].Freq += count; - } else if (curlen != 0) { - if (curlen != prevlen) s->bl_tree[curlen].Freq++; - s->bl_tree[REP_3_6].Freq++; - } else if (count <= 10) { - s->bl_tree[REPZ_3_10].Freq++; - } else { - s->bl_tree[REPZ_11_138].Freq++; - } - count = 0; prevlen = curlen; - if (nextlen == 0) { - max_count = 138, min_count = 3; - } else if (curlen == nextlen) { - max_count = 6, min_count = 3; - } else { - max_count = 7, min_count = 4; - } - } -} - -/* =========================================================================== - * Send a literal or distance tree in compressed form, using the codes in - * bl_tree. - */ -local void send_tree (s, tree, max_code) - deflate_state *s; - ct_data *tree; /* the tree to be scanned */ - int max_code; /* and its largest code of non zero frequency */ -{ - int n; /* iterates over all tree elements */ - int prevlen = -1; /* last emitted length */ - int curlen; /* length of current code */ - int nextlen = tree[0].Len; /* length of next code */ - int count = 0; /* repeat count of the current code */ - int max_count = 7; /* max repeat count */ - int min_count = 4; /* min repeat count */ - - /* tree[max_code+1].Len = -1; */ /* guard already set */ - if (nextlen == 0) max_count = 138, min_count = 3; - - for (n = 0; n <= max_code; n++) { - curlen = nextlen; nextlen = tree[n+1].Len; - if (++count < max_count && curlen == nextlen) { - continue; - } else if (count < min_count) { - do { send_code(s, curlen, s->bl_tree); } while (--count != 0); - - } else if (curlen != 0) { - if (curlen != prevlen) { - send_code(s, curlen, s->bl_tree); count--; - } - Assert(count >= 3 && count <= 6, " 3_6?"); - send_code(s, REP_3_6, s->bl_tree); send_bits(s, count-3, 2); - - } else if (count <= 10) { - send_code(s, REPZ_3_10, s->bl_tree); send_bits(s, count-3, 3); - - } else { - send_code(s, REPZ_11_138, s->bl_tree); send_bits(s, count-11, 7); - } - count = 0; prevlen = curlen; - if (nextlen == 0) { - max_count = 138, min_count = 3; - } else if (curlen == nextlen) { - max_count = 6, min_count = 3; - } else { - max_count = 7, min_count = 4; - } - } -} - -/* =========================================================================== - * Construct the Huffman tree for the bit lengths and return the index in - * bl_order of the last bit length code to send. - */ -local int build_bl_tree(s) - deflate_state *s; -{ - int max_blindex; /* index of last bit length code of non zero freq */ - - /* Determine the bit length frequencies for literal and distance trees */ - scan_tree(s, (ct_data *)s->dyn_ltree, s->l_desc.max_code); - scan_tree(s, (ct_data *)s->dyn_dtree, s->d_desc.max_code); - - /* Build the bit length tree: */ - build_tree(s, (tree_desc *)(&(s->bl_desc))); - /* opt_len now includes the length of the tree representations, except - * the lengths of the bit lengths codes and the 5+5+4 bits for the counts. - */ - - /* Determine the number of bit length codes to send. The pkzip format - * requires that at least 4 bit length codes be sent. (appnote.txt says - * 3 but the actual value used is 4.) - */ - for (max_blindex = BL_CODES-1; max_blindex >= 3; max_blindex--) { - if (s->bl_tree[bl_order[max_blindex]].Len != 0) break; - } - /* Update opt_len to include the bit length tree and counts */ - s->opt_len += 3*(max_blindex+1) + 5+5+4; - Tracev((stderr, "\ndyn trees: dyn %ld, stat %ld", - s->opt_len, s->static_len)); - - return max_blindex; -} - -/* =========================================================================== - * Send the header for a block using dynamic Huffman trees: the counts, the - * lengths of the bit length codes, the literal tree and the distance tree. - * IN assertion: lcodes >= 257, dcodes >= 1, blcodes >= 4. - */ -local void send_all_trees(s, lcodes, dcodes, blcodes) - deflate_state *s; - int lcodes, dcodes, blcodes; /* number of codes for each tree */ -{ - int rank; /* index in bl_order */ - - Assert (lcodes >= 257 && dcodes >= 1 && blcodes >= 4, "not enough codes"); - Assert (lcodes <= L_CODES && dcodes <= D_CODES && blcodes <= BL_CODES, - "too many codes"); - Tracev((stderr, "\nbl counts: ")); - send_bits(s, lcodes-257, 5); /* not +255 as stated in appnote.txt */ - send_bits(s, dcodes-1, 5); - send_bits(s, blcodes-4, 4); /* not -3 as stated in appnote.txt */ - for (rank = 0; rank < blcodes; rank++) { - Tracev((stderr, "\nbl code %2d ", bl_order[rank])); - send_bits(s, s->bl_tree[bl_order[rank]].Len, 3); - } - Tracev((stderr, "\nbl tree: sent %ld", s->bits_sent)); - - send_tree(s, (ct_data *)s->dyn_ltree, lcodes-1); /* literal tree */ - Tracev((stderr, "\nlit tree: sent %ld", s->bits_sent)); - - send_tree(s, (ct_data *)s->dyn_dtree, dcodes-1); /* distance tree */ - Tracev((stderr, "\ndist tree: sent %ld", s->bits_sent)); -} - -/* =========================================================================== - * Send a stored block - */ -void ZLIB_INTERNAL _tr_stored_block(s, buf, stored_len, last) - deflate_state *s; - charf *buf; /* input block */ - ulg stored_len; /* length of input block */ - int last; /* one if this is the last block for a file */ -{ - send_bits(s, (STORED_BLOCK<<1)+last, 3); /* send block type */ -#ifdef DEBUG - s->compressed_len = (s->compressed_len + 3 + 7) & (ulg)~7L; - s->compressed_len += (stored_len + 4) << 3; -#endif - copy_block(s, buf, (unsigned)stored_len, 1); /* with header */ -} - -/* =========================================================================== - * Flush the bits in the bit buffer to pending output (leaves at most 7 bits) - */ -void ZLIB_INTERNAL _tr_flush_bits(s) - deflate_state *s; -{ - bi_flush(s); -} - -/* =========================================================================== - * Send one empty static block to give enough lookahead for inflate. - * This takes 10 bits, of which 7 may remain in the bit buffer. - */ -void ZLIB_INTERNAL _tr_align(s) - deflate_state *s; -{ - send_bits(s, STATIC_TREES<<1, 3); - send_code(s, END_BLOCK, static_ltree); -#ifdef DEBUG - s->compressed_len += 10L; /* 3 for block type, 7 for EOB */ -#endif - bi_flush(s); -} - -/* =========================================================================== - * Determine the best encoding for the current block: dynamic trees, static - * trees or store, and output the encoded block to the zip file. - */ -void ZLIB_INTERNAL _tr_flush_block(s, buf, stored_len, last) - deflate_state *s; - charf *buf; /* input block, or NULL if too old */ - ulg stored_len; /* length of input block */ - int last; /* one if this is the last block for a file */ -{ - ulg opt_lenb, static_lenb; /* opt_len and static_len in bytes */ - int max_blindex = 0; /* index of last bit length code of non zero freq */ - - /* Build the Huffman trees unless a stored block is forced */ - if (s->level > 0) { - - /* Check if the file is binary or text */ - if (s->strm->data_type == Z_UNKNOWN) - s->strm->data_type = detect_data_type(s); - - /* Construct the literal and distance trees */ - build_tree(s, (tree_desc *)(&(s->l_desc))); - Tracev((stderr, "\nlit data: dyn %ld, stat %ld", s->opt_len, - s->static_len)); - - build_tree(s, (tree_desc *)(&(s->d_desc))); - Tracev((stderr, "\ndist data: dyn %ld, stat %ld", s->opt_len, - s->static_len)); - /* At this point, opt_len and static_len are the total bit lengths of - * the compressed block data, excluding the tree representations. - */ - - /* Build the bit length tree for the above two trees, and get the index - * in bl_order of the last bit length code to send. - */ - max_blindex = build_bl_tree(s); - - /* Determine the best encoding. Compute the block lengths in bytes. */ - opt_lenb = (s->opt_len+3+7)>>3; - static_lenb = (s->static_len+3+7)>>3; - - Tracev((stderr, "\nopt %lu(%lu) stat %lu(%lu) stored %lu lit %u ", - opt_lenb, s->opt_len, static_lenb, s->static_len, stored_len, - s->last_lit)); - - if (static_lenb <= opt_lenb) opt_lenb = static_lenb; - - } else { - Assert(buf != (char*)0, "lost buf"); - opt_lenb = static_lenb = stored_len + 5; /* force a stored block */ - } - -#ifdef FORCE_STORED - if (buf != (char*)0) { /* force stored block */ -#else - if (stored_len+4 <= opt_lenb && buf != (char*)0) { - /* 4: two words for the lengths */ -#endif - /* The test buf != NULL is only necessary if LIT_BUFSIZE > WSIZE. - * Otherwise we can't have processed more than WSIZE input bytes since - * the last block flush, because compression would have been - * successful. If LIT_BUFSIZE <= WSIZE, it is never too late to - * transform a block into a stored block. - */ - _tr_stored_block(s, buf, stored_len, last); - -#ifdef FORCE_STATIC - } else if (static_lenb >= 0) { /* force static trees */ -#else - } else if (s->strategy == Z_FIXED || static_lenb == opt_lenb) { -#endif - send_bits(s, (STATIC_TREES<<1)+last, 3); - compress_block(s, (ct_data *)static_ltree, (ct_data *)static_dtree); -#ifdef DEBUG - s->compressed_len += 3 + s->static_len; -#endif - } else { - send_bits(s, (DYN_TREES<<1)+last, 3); - send_all_trees(s, s->l_desc.max_code+1, s->d_desc.max_code+1, - max_blindex+1); - compress_block(s, (ct_data *)s->dyn_ltree, (ct_data *)s->dyn_dtree); -#ifdef DEBUG - s->compressed_len += 3 + s->opt_len; -#endif - } - Assert (s->compressed_len == s->bits_sent, "bad compressed size"); - /* The above check is made mod 2^32, for files larger than 512 MB - * and uLong implemented on 32 bits. - */ - init_block(s); - - if (last) { - bi_windup(s); -#ifdef DEBUG - s->compressed_len += 7; /* align on byte boundary */ -#endif - } - Tracev((stderr,"\ncomprlen %lu(%lu) ", s->compressed_len>>3, - s->compressed_len-7*last)); -} - -/* =========================================================================== - * Save the match info and tally the frequency counts. Return true if - * the current block must be flushed. - */ -int ZLIB_INTERNAL _tr_tally (s, dist, lc) - deflate_state *s; - unsigned dist; /* distance of matched string */ - unsigned lc; /* match length-MIN_MATCH or unmatched char (if dist==0) */ -{ - s->d_buf[s->last_lit] = (ush)dist; - s->l_buf[s->last_lit++] = (uch)lc; - if (dist == 0) { - /* lc is the unmatched char */ - s->dyn_ltree[lc].Freq++; - } else { - s->matches++; - /* Here, lc is the match length - MIN_MATCH */ - dist--; /* dist = match distance - 1 */ - Assert((ush)dist < (ush)MAX_DIST(s) && - (ush)lc <= (ush)(MAX_MATCH-MIN_MATCH) && - (ush)d_code(dist) < (ush)D_CODES, "_tr_tally: bad match"); - - s->dyn_ltree[_length_code[lc]+LITERALS+1].Freq++; - s->dyn_dtree[d_code(dist)].Freq++; - } - -#ifdef TRUNCATE_BLOCK - /* Try to guess if it is profitable to stop the current block here */ - if ((s->last_lit & 0x1fff) == 0 && s->level > 2) { - /* Compute an upper bound for the compressed length */ - ulg out_length = (ulg)s->last_lit*8L; - ulg in_length = (ulg)((long)s->strstart - s->block_start); - int dcode; - for (dcode = 0; dcode < D_CODES; dcode++) { - out_length += (ulg)s->dyn_dtree[dcode].Freq * - (5L+extra_dbits[dcode]); - } - out_length >>= 3; - Tracev((stderr,"\nlast_lit %u, in %ld, out ~%ld(%ld%%) ", - s->last_lit, in_length, out_length, - 100L - out_length*100L/in_length)); - if (s->matches < s->last_lit/2 && out_length < in_length/2) return 1; - } -#endif - return (s->last_lit == s->lit_bufsize-1); - /* We avoid equality with lit_bufsize because of wraparound at 64K - * on 16 bit machines and because stored blocks are restricted to - * 64K-1 bytes. - */ -} - -/* =========================================================================== - * Send the block data compressed using the given Huffman trees - */ -local void compress_block(s, ltree, dtree) - deflate_state *s; - ct_data *ltree; /* literal tree */ - ct_data *dtree; /* distance tree */ -{ - unsigned dist; /* distance of matched string */ - int lc; /* match length or unmatched char (if dist == 0) */ - unsigned lx = 0; /* running index in l_buf */ - unsigned code; /* the code to send */ - int extra; /* number of extra bits to send */ - - if (s->last_lit != 0) do { - dist = s->d_buf[lx]; - lc = s->l_buf[lx++]; - if (dist == 0) { - send_code(s, lc, ltree); /* send a literal byte */ - Tracecv(isgraph(lc), (stderr," '%c' ", lc)); - } else { - /* Here, lc is the match length - MIN_MATCH */ - code = _length_code[lc]; - send_code(s, code+LITERALS+1, ltree); /* send the length code */ - extra = extra_lbits[code]; - if (extra != 0) { - lc -= base_length[code]; - send_bits(s, lc, extra); /* send the extra length bits */ - } - dist--; /* dist is now the match distance - 1 */ - code = d_code(dist); - Assert (code < D_CODES, "bad d_code"); - - send_code(s, code, dtree); /* send the distance code */ - extra = extra_dbits[code]; - if (extra != 0) { - dist -= base_dist[code]; - send_bits(s, dist, extra); /* send the extra distance bits */ - } - } /* literal or match pair ? */ - - /* Check that the overlay between pending_buf and d_buf+l_buf is ok: */ - Assert((uInt)(s->pending) < s->lit_bufsize + 2*lx, - "pendingBuf overflow"); - - } while (lx < s->last_lit); - - send_code(s, END_BLOCK, ltree); -} - -/* =========================================================================== - * Check if the data type is TEXT or BINARY, using the following algorithm: - * - TEXT if the two conditions below are satisfied: - * a) There are no non-portable control characters belonging to the - * "black list" (0..6, 14..25, 28..31). - * b) There is at least one printable character belonging to the - * "white list" (9 {TAB}, 10 {LF}, 13 {CR}, 32..255). - * - BINARY otherwise. - * - The following partially-portable control characters form a - * "gray list" that is ignored in this detection algorithm: - * (7 {BEL}, 8 {BS}, 11 {VT}, 12 {FF}, 26 {SUB}, 27 {ESC}). - * IN assertion: the fields Freq of dyn_ltree are set. - */ -local int detect_data_type(s) - deflate_state *s; -{ - /* black_mask is the bit mask of black-listed bytes - * set bits 0..6, 14..25, and 28..31 - * 0xf3ffc07f = binary 11110011111111111100000001111111 - */ - unsigned long black_mask = 0xf3ffc07fUL; - int n; - - /* Check for non-textual ("black-listed") bytes. */ - for (n = 0; n <= 31; n++, black_mask >>= 1) - if ((black_mask & 1) && (s->dyn_ltree[n].Freq != 0)) - return Z_BINARY; - - /* Check for textual ("white-listed") bytes. */ - if (s->dyn_ltree[9].Freq != 0 || s->dyn_ltree[10].Freq != 0 - || s->dyn_ltree[13].Freq != 0) - return Z_TEXT; - for (n = 32; n < LITERALS; n++) - if (s->dyn_ltree[n].Freq != 0) - return Z_TEXT; - - /* There are no "black-listed" or "white-listed" bytes: - * this stream either is empty or has tolerated ("gray-listed") bytes only. - */ - return Z_BINARY; -} - -/* =========================================================================== - * Reverse the first len bits of a code, using straightforward code (a faster - * method would use a table) - * IN assertion: 1 <= len <= 15 - */ -local unsigned bi_reverse(code, len) - unsigned code; /* the value to invert */ - int len; /* its bit length */ -{ - register unsigned res = 0; - do { - res |= code & 1; - code >>= 1, res <<= 1; - } while (--len > 0); - return res >> 1; -} - -/* =========================================================================== - * Flush the bit buffer, keeping at most 7 bits in it. - */ -local void bi_flush(s) - deflate_state *s; -{ - if (s->bi_valid == 16) { - put_short(s, s->bi_buf); - s->bi_buf = 0; - s->bi_valid = 0; - } else if (s->bi_valid >= 8) { - put_byte(s, (Byte)s->bi_buf); - s->bi_buf >>= 8; - s->bi_valid -= 8; - } -} - -/* =========================================================================== - * Flush the bit buffer and align the output on a byte boundary - */ -local void bi_windup(s) - deflate_state *s; -{ - if (s->bi_valid > 8) { - put_short(s, s->bi_buf); - } else if (s->bi_valid > 0) { - put_byte(s, (Byte)s->bi_buf); - } - s->bi_buf = 0; - s->bi_valid = 0; -#ifdef DEBUG - s->bits_sent = (s->bits_sent+7) & ~7; -#endif -} - -/* =========================================================================== - * Copy a stored block, storing first the length and its - * one's complement if requested. - */ -local void copy_block(s, buf, len, header) - deflate_state *s; - charf *buf; /* the input data */ - unsigned len; /* its length */ - int header; /* true if block header must be written */ -{ - bi_windup(s); /* align on byte boundary */ - - if (header) { - put_short(s, (ush)len); - put_short(s, (ush)~len); -#ifdef DEBUG - s->bits_sent += 2*16; -#endif - } -#ifdef DEBUG - s->bits_sent += (ulg)len<<3; -#endif - while (len--) { - put_byte(s, *buf++); - } -} diff --git a/sdk-modifications/libsrc/zlib/trees.h b/sdk-modifications/libsrc/zlib/trees.h deleted file mode 100755 index d35639d..0000000 --- a/sdk-modifications/libsrc/zlib/trees.h +++ /dev/null @@ -1,128 +0,0 @@ -/* header created automatically with -DGEN_TREES_H */ - -local const ct_data static_ltree[L_CODES+2] = { -{{ 12},{ 8}}, {{140},{ 8}}, {{ 76},{ 8}}, {{204},{ 8}}, {{ 44},{ 8}}, -{{172},{ 8}}, {{108},{ 8}}, {{236},{ 8}}, {{ 28},{ 8}}, {{156},{ 8}}, -{{ 92},{ 8}}, {{220},{ 8}}, {{ 60},{ 8}}, {{188},{ 8}}, {{124},{ 8}}, -{{252},{ 8}}, {{ 2},{ 8}}, {{130},{ 8}}, {{ 66},{ 8}}, {{194},{ 8}}, -{{ 34},{ 8}}, {{162},{ 8}}, {{ 98},{ 8}}, {{226},{ 8}}, {{ 18},{ 8}}, -{{146},{ 8}}, {{ 82},{ 8}}, {{210},{ 8}}, {{ 50},{ 8}}, {{178},{ 8}}, -{{114},{ 8}}, {{242},{ 8}}, {{ 10},{ 8}}, {{138},{ 8}}, {{ 74},{ 8}}, -{{202},{ 8}}, {{ 42},{ 8}}, {{170},{ 8}}, {{106},{ 8}}, {{234},{ 8}}, -{{ 26},{ 8}}, {{154},{ 8}}, {{ 90},{ 8}}, {{218},{ 8}}, {{ 58},{ 8}}, -{{186},{ 8}}, {{122},{ 8}}, {{250},{ 8}}, {{ 6},{ 8}}, {{134},{ 8}}, -{{ 70},{ 8}}, {{198},{ 8}}, {{ 38},{ 8}}, {{166},{ 8}}, {{102},{ 8}}, -{{230},{ 8}}, {{ 22},{ 8}}, {{150},{ 8}}, {{ 86},{ 8}}, {{214},{ 8}}, -{{ 54},{ 8}}, {{182},{ 8}}, {{118},{ 8}}, {{246},{ 8}}, {{ 14},{ 8}}, -{{142},{ 8}}, {{ 78},{ 8}}, {{206},{ 8}}, {{ 46},{ 8}}, {{174},{ 8}}, -{{110},{ 8}}, {{238},{ 8}}, {{ 30},{ 8}}, {{158},{ 8}}, {{ 94},{ 8}}, -{{222},{ 8}}, {{ 62},{ 8}}, {{190},{ 8}}, {{126},{ 8}}, {{254},{ 8}}, -{{ 1},{ 8}}, {{129},{ 8}}, {{ 65},{ 8}}, {{193},{ 8}}, {{ 33},{ 8}}, -{{161},{ 8}}, {{ 97},{ 8}}, {{225},{ 8}}, {{ 17},{ 8}}, {{145},{ 8}}, -{{ 81},{ 8}}, {{209},{ 8}}, {{ 49},{ 8}}, {{177},{ 8}}, {{113},{ 8}}, -{{241},{ 8}}, {{ 9},{ 8}}, {{137},{ 8}}, {{ 73},{ 8}}, {{201},{ 8}}, -{{ 41},{ 8}}, {{169},{ 8}}, {{105},{ 8}}, {{233},{ 8}}, {{ 25},{ 8}}, -{{153},{ 8}}, {{ 89},{ 8}}, {{217},{ 8}}, {{ 57},{ 8}}, {{185},{ 8}}, -{{121},{ 8}}, {{249},{ 8}}, {{ 5},{ 8}}, {{133},{ 8}}, {{ 69},{ 8}}, -{{197},{ 8}}, {{ 37},{ 8}}, {{165},{ 8}}, {{101},{ 8}}, {{229},{ 8}}, -{{ 21},{ 8}}, {{149},{ 8}}, {{ 85},{ 8}}, {{213},{ 8}}, {{ 53},{ 8}}, -{{181},{ 8}}, {{117},{ 8}}, {{245},{ 8}}, {{ 13},{ 8}}, {{141},{ 8}}, -{{ 77},{ 8}}, {{205},{ 8}}, {{ 45},{ 8}}, {{173},{ 8}}, {{109},{ 8}}, -{{237},{ 8}}, {{ 29},{ 8}}, {{157},{ 8}}, {{ 93},{ 8}}, {{221},{ 8}}, -{{ 61},{ 8}}, {{189},{ 8}}, {{125},{ 8}}, {{253},{ 8}}, {{ 19},{ 9}}, -{{275},{ 9}}, {{147},{ 9}}, {{403},{ 9}}, {{ 83},{ 9}}, {{339},{ 9}}, -{{211},{ 9}}, {{467},{ 9}}, {{ 51},{ 9}}, {{307},{ 9}}, {{179},{ 9}}, -{{435},{ 9}}, {{115},{ 9}}, {{371},{ 9}}, {{243},{ 9}}, {{499},{ 9}}, -{{ 11},{ 9}}, {{267},{ 9}}, {{139},{ 9}}, {{395},{ 9}}, {{ 75},{ 9}}, -{{331},{ 9}}, {{203},{ 9}}, {{459},{ 9}}, {{ 43},{ 9}}, {{299},{ 9}}, -{{171},{ 9}}, {{427},{ 9}}, {{107},{ 9}}, {{363},{ 9}}, {{235},{ 9}}, -{{491},{ 9}}, {{ 27},{ 9}}, {{283},{ 9}}, {{155},{ 9}}, {{411},{ 9}}, -{{ 91},{ 9}}, {{347},{ 9}}, {{219},{ 9}}, {{475},{ 9}}, {{ 59},{ 9}}, -{{315},{ 9}}, {{187},{ 9}}, {{443},{ 9}}, {{123},{ 9}}, {{379},{ 9}}, -{{251},{ 9}}, {{507},{ 9}}, {{ 7},{ 9}}, {{263},{ 9}}, {{135},{ 9}}, -{{391},{ 9}}, {{ 71},{ 9}}, {{327},{ 9}}, {{199},{ 9}}, {{455},{ 9}}, -{{ 39},{ 9}}, {{295},{ 9}}, {{167},{ 9}}, {{423},{ 9}}, {{103},{ 9}}, -{{359},{ 9}}, {{231},{ 9}}, {{487},{ 9}}, {{ 23},{ 9}}, {{279},{ 9}}, -{{151},{ 9}}, {{407},{ 9}}, {{ 87},{ 9}}, {{343},{ 9}}, {{215},{ 9}}, -{{471},{ 9}}, {{ 55},{ 9}}, {{311},{ 9}}, {{183},{ 9}}, {{439},{ 9}}, -{{119},{ 9}}, {{375},{ 9}}, {{247},{ 9}}, {{503},{ 9}}, {{ 15},{ 9}}, -{{271},{ 9}}, {{143},{ 9}}, {{399},{ 9}}, {{ 79},{ 9}}, {{335},{ 9}}, -{{207},{ 9}}, {{463},{ 9}}, {{ 47},{ 9}}, {{303},{ 9}}, {{175},{ 9}}, -{{431},{ 9}}, {{111},{ 9}}, {{367},{ 9}}, {{239},{ 9}}, {{495},{ 9}}, -{{ 31},{ 9}}, {{287},{ 9}}, {{159},{ 9}}, {{415},{ 9}}, {{ 95},{ 9}}, -{{351},{ 9}}, {{223},{ 9}}, {{479},{ 9}}, {{ 63},{ 9}}, {{319},{ 9}}, -{{191},{ 9}}, {{447},{ 9}}, {{127},{ 9}}, {{383},{ 9}}, {{255},{ 9}}, -{{511},{ 9}}, {{ 0},{ 7}}, {{ 64},{ 7}}, {{ 32},{ 7}}, {{ 96},{ 7}}, -{{ 16},{ 7}}, {{ 80},{ 7}}, {{ 48},{ 7}}, {{112},{ 7}}, {{ 8},{ 7}}, -{{ 72},{ 7}}, {{ 40},{ 7}}, {{104},{ 7}}, {{ 24},{ 7}}, {{ 88},{ 7}}, -{{ 56},{ 7}}, {{120},{ 7}}, {{ 4},{ 7}}, {{ 68},{ 7}}, {{ 36},{ 7}}, -{{100},{ 7}}, {{ 20},{ 7}}, {{ 84},{ 7}}, {{ 52},{ 7}}, {{116},{ 7}}, -{{ 3},{ 8}}, {{131},{ 8}}, {{ 67},{ 8}}, {{195},{ 8}}, {{ 35},{ 8}}, -{{163},{ 8}}, {{ 99},{ 8}}, {{227},{ 8}} -}; - -local const ct_data static_dtree[D_CODES] = { -{{ 0},{ 5}}, {{16},{ 5}}, {{ 8},{ 5}}, {{24},{ 5}}, {{ 4},{ 5}}, -{{20},{ 5}}, {{12},{ 5}}, {{28},{ 5}}, {{ 2},{ 5}}, {{18},{ 5}}, -{{10},{ 5}}, {{26},{ 5}}, {{ 6},{ 5}}, {{22},{ 5}}, {{14},{ 5}}, -{{30},{ 5}}, {{ 1},{ 5}}, {{17},{ 5}}, {{ 9},{ 5}}, {{25},{ 5}}, -{{ 5},{ 5}}, {{21},{ 5}}, {{13},{ 5}}, {{29},{ 5}}, {{ 3},{ 5}}, -{{19},{ 5}}, {{11},{ 5}}, {{27},{ 5}}, {{ 7},{ 5}}, {{23},{ 5}} -}; - -const uch ZLIB_INTERNAL _dist_code[DIST_CODE_LEN] = { - 0, 1, 2, 3, 4, 4, 5, 5, 6, 6, 6, 6, 7, 7, 7, 7, 8, 8, 8, 8, - 8, 8, 8, 8, 9, 9, 9, 9, 9, 9, 9, 9, 10, 10, 10, 10, 10, 10, 10, 10, -10, 10, 10, 10, 10, 10, 10, 10, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, -11, 11, 11, 11, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, -12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 13, 13, 13, 13, -13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, -13, 13, 13, 13, 13, 13, 13, 13, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, -14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, -14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, -14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 15, 15, 15, 15, 15, 15, 15, 15, -15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, -15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, -15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 0, 0, 16, 17, -18, 18, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 22, 22, 22, 22, 22, 22, 22, 22, -23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, -24, 24, 24, 24, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, -26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, -26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27, -27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, -27, 27, 27, 27, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, -28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, -28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, -28, 28, 28, 28, 28, 28, 28, 28, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, -29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, -29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, -29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29 -}; - -const uch ZLIB_INTERNAL _length_code[MAX_MATCH-MIN_MATCH+1]= { - 0, 1, 2, 3, 4, 5, 6, 7, 8, 8, 9, 9, 10, 10, 11, 11, 12, 12, 12, 12, -13, 13, 13, 13, 14, 14, 14, 14, 15, 15, 15, 15, 16, 16, 16, 16, 16, 16, 16, 16, -17, 17, 17, 17, 17, 17, 17, 17, 18, 18, 18, 18, 18, 18, 18, 18, 19, 19, 19, 19, -19, 19, 19, 19, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, -21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 22, 22, 22, 22, -22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 23, 23, 23, 23, 23, 23, 23, 23, -23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, -24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, -25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, -25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 26, 26, 26, 26, 26, 26, 26, 26, -26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, -26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, -27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 28 -}; - -local const int base_length[LENGTH_CODES] = { -0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 12, 14, 16, 20, 24, 28, 32, 40, 48, 56, -64, 80, 96, 112, 128, 160, 192, 224, 0 -}; - -local const int base_dist[D_CODES] = { - 0, 1, 2, 3, 4, 6, 8, 12, 16, 24, - 32, 48, 64, 96, 128, 192, 256, 384, 512, 768, - 1024, 1536, 2048, 3072, 4096, 6144, 8192, 12288, 16384, 24576 -}; - diff --git a/sdk-modifications/libsrc/zlib/uncompr.c b/sdk-modifications/libsrc/zlib/uncompr.c deleted file mode 100755 index ad98be3..0000000 --- a/sdk-modifications/libsrc/zlib/uncompr.c +++ /dev/null @@ -1,59 +0,0 @@ -/* uncompr.c -- decompress a memory buffer - * Copyright (C) 1995-2003, 2010 Jean-loup Gailly. - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* @(#) $Id$ */ - -#define ZLIB_INTERNAL -#include "zlib.h" - -/* =========================================================================== - Decompresses the source buffer into the destination buffer. sourceLen is - the byte length of the source buffer. Upon entry, destLen is the total - size of the destination buffer, which must be large enough to hold the - entire uncompressed data. (The size of the uncompressed data must have - been saved previously by the compressor and transmitted to the decompressor - by some mechanism outside the scope of this compression library.) - Upon exit, destLen is the actual size of the compressed buffer. - - uncompress returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_BUF_ERROR if there was not enough room in the output - buffer, or Z_DATA_ERROR if the input data was corrupted. -*/ -int ZEXPORT uncompress (dest, destLen, source, sourceLen) - Bytef *dest; - uLongf *destLen; - const Bytef *source; - uLong sourceLen; -{ - z_stream stream; - int err; - - stream.next_in = (Bytef*)source; - stream.avail_in = (uInt)sourceLen; - /* Check for source > 64K on 16-bit machine: */ - if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR; - - stream.next_out = dest; - stream.avail_out = (uInt)*destLen; - if ((uLong)stream.avail_out != *destLen) return Z_BUF_ERROR; - - stream.zalloc = (alloc_func)0; - stream.zfree = (free_func)0; - - err = inflateInit(&stream); - if (err != Z_OK) return err; - - err = inflate(&stream, Z_FINISH); - if (err != Z_STREAM_END) { - inflateEnd(&stream); - if (err == Z_NEED_DICT || (err == Z_BUF_ERROR && stream.avail_in == 0)) - return Z_DATA_ERROR; - return err; - } - *destLen = stream.total_out; - - err = inflateEnd(&stream); - return err; -} diff --git a/sdk-modifications/libsrc/zlib/zconf.h b/sdk-modifications/libsrc/zlib/zconf.h deleted file mode 100644 index 587a87c..0000000 --- a/sdk-modifications/libsrc/zlib/zconf.h +++ /dev/null @@ -1,468 +0,0 @@ -/* zconf.h -- configuration of the zlib compression library - * Copyright (C) 1995-2011 Jean-loup Gailly. - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* @(#) $Id$ */ - -#ifndef ZCONF_H -#define ZCONF_H - -/* - * If you *really* need a unique prefix for all types and library functions, - * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it. - * Even better than compiling with -DZ_PREFIX would be to use configure to set - * this permanently in zconf.h using "./configure --zprefix". - */ -#ifdef Z_PREFIX /* may be set to #if 1 by ./configure */ -# define Z_PREFIX_SET - -/* all linked symbols */ -# define _dist_code z__dist_code -# define _length_code z__length_code -# define _tr_align z__tr_align -# define _tr_flush_block z__tr_flush_block -# define _tr_init z__tr_init -# define _tr_stored_block z__tr_stored_block -# define _tr_tally z__tr_tally -# define adler32 z_adler32 -# define adler32_combine z_adler32_combine -# define adler32_combine64 z_adler32_combine64 -# ifndef Z_SOLO -# define compress z_compress -# define compress2 z_compress2 -# define compressBound z_compressBound -# endif -# define crc32 z_crc32 -# define crc32_combine z_crc32_combine -# define crc32_combine64 z_crc32_combine64 -# define deflate z_deflate -# define deflateBound z_deflateBound -# define deflateCopy z_deflateCopy -# define deflateEnd z_deflateEnd -# define deflateInit2_ z_deflateInit2_ -# define deflateInit_ z_deflateInit_ -# define deflateParams z_deflateParams -# define deflatePending z_deflatePending -# define deflatePrime z_deflatePrime -# define deflateReset z_deflateReset -# define deflateResetKeep z_deflateResetKeep -# define deflateSetDictionary z_deflateSetDictionary -# define deflateSetHeader z_deflateSetHeader -# define deflateTune z_deflateTune -# define deflate_copyright z_deflate_copyright -# define get_crc_table z_get_crc_table -# ifndef Z_SOLO -# define gz_error z_gz_error -# define gz_intmax z_gz_intmax -# define gz_strwinerror z_gz_strwinerror -# define gzbuffer z_gzbuffer -# define gzclearerr z_gzclearerr -# define gzclose z_gzclose -# define gzclose_r z_gzclose_r -# define gzclose_w z_gzclose_w -# define gzdirect z_gzdirect -# define gzdopen z_gzdopen -# define gzeof z_gzeof -# define gzerror z_gzerror -# define gzflags z_gzflags -# define gzflush z_gzflush -# define gzgetc z_gzgetc -# define gzgetc_ z_gzgetc_ -# define gzgets z_gzgets -# define gzoffset z_gzoffset -# define gzoffset64 z_gzoffset64 -# define gzopen z_gzopen -# define gzopen64 z_gzopen64 -# define gzprintf z_gzprintf -# define gzputc z_gzputc -# define gzputs z_gzputs -# define gzread z_gzread -# define gzrewind z_gzrewind -# define gzseek z_gzseek -# define gzseek64 z_gzseek64 -# define gzsetparams z_gzsetparams -# define gztell z_gztell -# define gztell64 z_gztell64 -# define gzungetc z_gzungetc -# define gzwrite z_gzwrite -# endif -# define inflate z_inflate -# define inflateBack z_inflateBack -# define inflateBackEnd z_inflateBackEnd -# define inflateBackInit_ z_inflateBackInit_ -# define inflateCopy z_inflateCopy -# define inflateEnd z_inflateEnd -# define inflateGetHeader z_inflateGetHeader -# define inflateInit2_ z_inflateInit2_ -# define inflateInit_ z_inflateInit_ -# define inflateMark z_inflateMark -# define inflatePrime z_inflatePrime -# define inflateReset z_inflateReset -# define inflateReset2 z_inflateReset2 -# define inflateSetDictionary z_inflateSetDictionary -# define inflateSync z_inflateSync -# define inflateSyncPoint z_inflateSyncPoint -# define inflateUndermine z_inflateUndermine -# define inflateResetKeep z_inflateResetKeep -# define inflate_copyright z_inflate_copyright -# define inflate_fast z_inflate_fast -# define inflate_table z_inflate_table -# ifndef Z_SOLO -# define uncompress z_uncompress -# endif -# define zError z_zError -# ifndef Z_SOLO -# define zcalloc z_zcalloc -# define zcfree z_zcfree -# endif -# define zlibCompileFlags z_zlibCompileFlags -# define zlibVersion z_zlibVersion - -/* all zlib typedefs in zlib.h and zconf.h */ -# define Byte z_Byte -# define Bytef z_Bytef -# define alloc_func z_alloc_func -# define charf z_charf -# define free_func z_free_func -# ifndef Z_SOLO -# define gzFile z_gzFile -# define gz_header z_gz_header -# define gz_headerp z_gz_headerp -# endif -# define in_func z_in_func -# define intf z_intf -# define out_func z_out_func -# define uInt z_uInt -# define uIntf z_uIntf -# define uLong z_uLong -# define uLongf z_uLongf -# define voidp z_voidp -# define voidpc z_voidpc -# define voidpf z_voidpf - -/* all zlib structs in zlib.h and zconf.h */ -# ifndef Z_SOLO -# define gz_header_s z_gz_header_s -# endif -# define internal_state z_internal_state - -#endif - -#if defined(__MSDOS__) && !defined(MSDOS) -# define MSDOS -#endif -#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2) -# define OS2 -#endif -#if defined(_WINDOWS) && !defined(WINDOWS) -# define WINDOWS -#endif -#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__) -# ifndef WIN32 -# define WIN32 -# endif -#endif -#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32) -# if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__) -# ifndef SYS16BIT -# define SYS16BIT -# endif -# endif -#endif - -/* - * Compile with -DMAXSEG_64K if the alloc function cannot allocate more - * than 64k bytes at a time (needed on systems with 16-bit int). - */ -#ifdef SYS16BIT -# define MAXSEG_64K -#endif -#ifdef MSDOS -# define UNALIGNED_OK -#endif - -#ifdef __STDC_VERSION__ -# ifndef STDC -# define STDC -# endif -# if __STDC_VERSION__ >= 199901L -# ifndef STDC99 -# define STDC99 -# endif -# endif -#endif -#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus)) -# define STDC -#endif -#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__)) -# define STDC -#endif -#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32)) -# define STDC -#endif -#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__)) -# define STDC -#endif - -#if defined(__OS400__) && !defined(STDC) /* iSeries (formerly AS/400). */ -# define STDC -#endif - -#ifndef STDC -# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */ -# define const /* note: need a more gentle solution here */ -# endif -#endif - -#if defined(ZLIB_CONST) && !defined(z_const) -# define z_const const -#else -# define z_const -#endif - -/* Some Mac compilers merge all .h files incorrectly: */ -#if defined(__MWERKS__)||defined(applec)||defined(THINK_C)||defined(__SC__) -# define NO_DUMMY_DECL -#endif - -/* Maximum value for memLevel in deflateInit2 */ -#ifndef MAX_MEM_LEVEL -# ifdef MAXSEG_64K -# define MAX_MEM_LEVEL 8 -# else -# define MAX_MEM_LEVEL 9 -# endif -#endif - -/* Maximum value for windowBits in deflateInit2 and inflateInit2. - * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files - * created by gzip. (Files created by minigzip can still be extracted by - * gzip.) - */ -#ifndef MAX_WBITS -# define MAX_WBITS 15 /* 32K LZ77 window */ -#endif - -/* The memory requirements for deflate are (in bytes): - (1 << (windowBits+2)) + (1 << (memLevel+9)) - that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values) - plus a few kilobytes for small objects. For example, if you want to reduce - the default memory requirements from 256K to 128K, compile with - make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7" - Of course this will generally degrade compression (there's no free lunch). - - The memory requirements for inflate are (in bytes) 1 << windowBits - that is, 32K for windowBits=15 (default value) plus a few kilobytes - for small objects. -*/ - - /* Type declarations */ - -#ifndef OF /* function prototypes */ -# ifdef STDC -# define OF(args) args -# else -# define OF(args) () -# endif -#endif - -#ifndef Z_ARG /* function prototypes for stdarg */ -# if defined(STDC) || defined(Z_HAVE_STDARG_H) -# define Z_ARG(args) args -# else -# define Z_ARG(args) () -# endif -#endif - -/* The following definitions for FAR are needed only for MSDOS mixed - * model programming (small or medium model with some far allocations). - * This was tested only with MSC; for other MSDOS compilers you may have - * to define NO_MEMCPY in zutil.h. If you don't need the mixed model, - * just define FAR to be empty. - */ -#ifdef SYS16BIT -# if defined(M_I86SM) || defined(M_I86MM) - /* MSC small or medium model */ -# define SMALL_MEDIUM -# ifdef _MSC_VER -# define FAR _far -# else -# define FAR far -# endif -# endif -# if (defined(__SMALL__) || defined(__MEDIUM__)) - /* Turbo C small or medium model */ -# define SMALL_MEDIUM -# ifdef __BORLANDC__ -# define FAR _far -# else -# define FAR far -# endif -# endif -#endif - -#if defined(WINDOWS) || defined(WIN32) - /* If building or using zlib as a DLL, define ZLIB_DLL. - * This is not mandatory, but it offers a little performance increase. - */ -# ifdef ZLIB_DLL -# if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500)) -# ifdef ZLIB_INTERNAL -# define ZEXTERN extern __declspec(dllexport) -# else -# define ZEXTERN extern __declspec(dllimport) -# endif -# endif -# endif /* ZLIB_DLL */ - /* If building or using zlib with the WINAPI/WINAPIV calling convention, - * define ZLIB_WINAPI. - * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI. - */ -# ifdef ZLIB_WINAPI -# ifdef FAR -# undef FAR -# endif -# include <windows.h> - /* No need for _export, use ZLIB.DEF instead. */ - /* For complete Windows compatibility, use WINAPI, not __stdcall. */ -# define ZEXPORT WINAPI -# ifdef WIN32 -# define ZEXPORTVA WINAPIV -# else -# define ZEXPORTVA FAR CDECL -# endif -# endif -#endif - -#if defined (__BEOS__) -# ifdef ZLIB_DLL -# ifdef ZLIB_INTERNAL -# define ZEXPORT __declspec(dllexport) -# define ZEXPORTVA __declspec(dllexport) -# else -# define ZEXPORT __declspec(dllimport) -# define ZEXPORTVA __declspec(dllimport) -# endif -# endif -#endif - -#ifndef ZEXTERN -# define ZEXTERN extern -#endif -#ifndef ZEXPORT -# define ZEXPORT -#endif -#ifndef ZEXPORTVA -# define ZEXPORTVA -#endif - -#ifndef FAR -# define FAR -#endif - -#if !defined(__MACTYPES__) -typedef unsigned char Byte; /* 8 bits */ -#endif -typedef unsigned int uInt; /* 16 bits or more */ -typedef unsigned long uLong; /* 32 bits or more */ - -#ifdef SMALL_MEDIUM - /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */ -# define Bytef Byte FAR -#else - typedef Byte FAR Bytef; -#endif -typedef char FAR charf; -typedef int FAR intf; -typedef uInt FAR uIntf; -typedef uLong FAR uLongf; - -#ifdef STDC - typedef void const *voidpc; - typedef void FAR *voidpf; - typedef void *voidp; -#else - typedef Byte const *voidpc; - typedef Byte FAR *voidpf; - typedef Byte *voidp; -#endif - -#ifdef HAVE_UNISTD_H /* may be set to #if 1 by ./configure */ -# define Z_HAVE_UNISTD_H -#endif - -#ifdef HAVE_STDARG_H /* may be set to #if 1 by ./configure */ -# define Z_HAVE_STDARG_H -#endif - -#ifdef STDC -# ifndef Z_SOLO -// # include <sys/types.h> /* for off_t */ -// Doesn't work on the DS2 SDK, because there are type conflicts between -// sys/types.h and the filesystem API.//# include <sys/types.h> /* for off_t */ -# endif -#endif - -/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and - * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even - * though the former does not conform to the LFS document), but considering - * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as - * equivalently requesting no 64-bit operations - */ -#if -_LARGEFILE64_SOURCE - -1 == 1 -# undef _LARGEFILE64_SOURCE -#endif - -#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0 -# define Z_LARGE -#endif - -#if (defined(Z_HAVE_UNISTD_H) || defined(Z_LARGE)) && !defined(Z_SOLO) -# include <unistd.h> /* for SEEK_* and off_t */ -# ifdef VMS -# include <unixio.h> /* for off_t */ -# endif -# ifndef z_off_t -# define z_off_t off_t -# endif -#endif - -#if !defined(SEEK_SET) && !defined(Z_SOLO) -# define SEEK_SET 0 /* Seek from beginning of file. */ -# define SEEK_CUR 1 /* Seek from current position. */ -# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */ -#endif - -#ifndef z_off_t -# define z_off_t long -#endif - -#if !defined(_WIN32) && (defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0) -# define z_off64_t off64_t -#else -# if defined(_WIN32) -# define z_off64_t __int64 -# else -# define z_off64_t z_off_t -#endif -#endif - -/* MVS linker does not support external names larger than 8 bytes */ -#if defined(__MVS__) - #pragma map(deflateInit_,"DEIN") - #pragma map(deflateInit2_,"DEIN2") - #pragma map(deflateEnd,"DEEND") - #pragma map(deflateBound,"DEBND") - #pragma map(inflateInit_,"ININ") - #pragma map(inflateInit2_,"ININ2") - #pragma map(inflateEnd,"INEND") - #pragma map(inflateSync,"INSY") - #pragma map(inflateSetDictionary,"INSEDI") - #pragma map(compressBound,"CMBND") - #pragma map(inflate_table,"INTABL") - #pragma map(inflate_fast,"INFA") - #pragma map(inflate_copyright,"INCOPY") -#endif - -#endif /* ZCONF_H */ diff --git a/sdk-modifications/libsrc/zlib/zlib.h b/sdk-modifications/libsrc/zlib/zlib.h deleted file mode 100755 index 79142d1..0000000 --- a/sdk-modifications/libsrc/zlib/zlib.h +++ /dev/null @@ -1,1732 +0,0 @@ -/* zlib.h -- interface of the 'zlib' general purpose compression library - version 1.2.6, January 29th, 2012 - - Copyright (C) 1995-2012 Jean-loup Gailly and Mark Adler - - This software is provided 'as-is', without any express or implied - warranty. In no event will the authors be held liable for any damages - arising from the use of this software. - - Permission is granted to anyone to use this software for any purpose, - including commercial applications, and to alter it and redistribute it - freely, subject to the following restrictions: - - 1. The origin of this software must not be misrepresented; you must not - claim that you wrote the original software. If you use this software - in a product, an acknowledgment in the product documentation would be - appreciated but is not required. - 2. Altered source versions must be plainly marked as such, and must not be - misrepresented as being the original software. - 3. This notice may not be removed or altered from any source distribution. - - Jean-loup Gailly Mark Adler - jloup@gzip.org madler@alumni.caltech.edu - - - The data format used by the zlib library is described by RFCs (Request for - Comments) 1950 to 1952 in the files http://tools.ietf.org/html/rfc1950 - (zlib format), rfc1951 (deflate format) and rfc1952 (gzip format). -*/ - -#ifndef ZLIB_H -#define ZLIB_H - -#include "zconf.h" - -#ifdef __cplusplus -extern "C" { -#endif - -#define ZLIB_VERSION "1.2.6" -#define ZLIB_VERNUM 0x1260 -#define ZLIB_VER_MAJOR 1 -#define ZLIB_VER_MINOR 2 -#define ZLIB_VER_REVISION 6 -#define ZLIB_VER_SUBREVISION 0 - -/* - The 'zlib' compression library provides in-memory compression and - decompression functions, including integrity checks of the uncompressed data. - This version of the library supports only one compression method (deflation) - but other algorithms will be added later and will have the same stream - interface. - - Compression can be done in a single step if the buffers are large enough, - or can be done by repeated calls of the compression function. In the latter - case, the application must provide more input and/or consume the output - (providing more output space) before each call. - - The compressed data format used by default by the in-memory functions is - the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped - around a deflate stream, which is itself documented in RFC 1951. - - The library also supports reading and writing files in gzip (.gz) format - with an interface similar to that of stdio using the functions that start - with "gz". The gzip format is different from the zlib format. gzip is a - gzip wrapper, documented in RFC 1952, wrapped around a deflate stream. - - This library can optionally read and write gzip streams in memory as well. - - The zlib format was designed to be compact and fast for use in memory - and on communications channels. The gzip format was designed for single- - file compression on file systems, has a larger header than zlib to maintain - directory information, and uses a different, slower check method than zlib. - - The library does not install any signal handler. The decoder checks - the consistency of the compressed data, so the library should never crash - even in case of corrupted input. -*/ - -typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size)); -typedef void (*free_func) OF((voidpf opaque, voidpf address)); - -struct internal_state; - -typedef struct z_stream_s { - z_const Bytef *next_in; /* next input byte */ - uInt avail_in; /* number of bytes available at next_in */ - uLong total_in; /* total number of input bytes read so far */ - - Bytef *next_out; /* next output byte should be put there */ - uInt avail_out; /* remaining free space at next_out */ - uLong total_out; /* total number of bytes output so far */ - - z_const char *msg; /* last error message, NULL if no error */ - struct internal_state FAR *state; /* not visible by applications */ - - alloc_func zalloc; /* used to allocate the internal state */ - free_func zfree; /* used to free the internal state */ - voidpf opaque; /* private data object passed to zalloc and zfree */ - - int data_type; /* best guess about the data type: binary or text */ - uLong adler; /* adler32 value of the uncompressed data */ - uLong reserved; /* reserved for future use */ -} z_stream; - -typedef z_stream FAR *z_streamp; - -/* - gzip header information passed to and from zlib routines. See RFC 1952 - for more details on the meanings of these fields. -*/ -typedef struct gz_header_s { - int text; /* true if compressed data believed to be text */ - uLong time; /* modification time */ - int xflags; /* extra flags (not used when writing a gzip file) */ - int os; /* operating system */ - Bytef *extra; /* pointer to extra field or Z_NULL if none */ - uInt extra_len; /* extra field length (valid if extra != Z_NULL) */ - uInt extra_max; /* space at extra (only when reading header) */ - Bytef *name; /* pointer to zero-terminated file name or Z_NULL */ - uInt name_max; /* space at name (only when reading header) */ - Bytef *comment; /* pointer to zero-terminated comment or Z_NULL */ - uInt comm_max; /* space at comment (only when reading header) */ - int hcrc; /* true if there was or will be a header crc */ - int done; /* true when done reading gzip header (not used - when writing a gzip file) */ -} gz_header; - -typedef gz_header FAR *gz_headerp; - -/* - The application must update next_in and avail_in when avail_in has dropped - to zero. It must update next_out and avail_out when avail_out has dropped - to zero. The application must initialize zalloc, zfree and opaque before - calling the init function. All other fields are set by the compression - library and must not be updated by the application. - - The opaque value provided by the application will be passed as the first - parameter for calls of zalloc and zfree. This can be useful for custom - memory management. The compression library attaches no meaning to the - opaque value. - - zalloc must return Z_NULL if there is not enough memory for the object. - If zlib is used in a multi-threaded application, zalloc and zfree must be - thread safe. - - On 16-bit systems, the functions zalloc and zfree must be able to allocate - exactly 65536 bytes, but will not be required to allocate more than this if - the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, pointers - returned by zalloc for objects of exactly 65536 bytes *must* have their - offset normalized to zero. The default allocation function provided by this - library ensures this (see zutil.c). To reduce memory requirements and avoid - any allocation of 64K objects, at the expense of compression ratio, compile - the library with -DMAX_WBITS=14 (see zconf.h). - - The fields total_in and total_out can be used for statistics or progress - reports. After compression, total_in holds the total size of the - uncompressed data and may be saved for use in the decompressor (particularly - if the decompressor wants to decompress everything in a single step). -*/ - - /* constants */ - -#define Z_NO_FLUSH 0 -#define Z_PARTIAL_FLUSH 1 -#define Z_SYNC_FLUSH 2 -#define Z_FULL_FLUSH 3 -#define Z_FINISH 4 -#define Z_BLOCK 5 -#define Z_TREES 6 -/* Allowed flush values; see deflate() and inflate() below for details */ - -#define Z_OK 0 -#define Z_STREAM_END 1 -#define Z_NEED_DICT 2 -#define Z_ERRNO (-1) -#define Z_STREAM_ERROR (-2) -#define Z_DATA_ERROR (-3) -#define Z_MEM_ERROR (-4) -#define Z_BUF_ERROR (-5) -#define Z_VERSION_ERROR (-6) -/* Return codes for the compression/decompression functions. Negative values - * are errors, positive values are used for special but normal events. - */ - -#define Z_NO_COMPRESSION 0 -#define Z_BEST_SPEED 1 -#define Z_BEST_COMPRESSION 9 -#define Z_DEFAULT_COMPRESSION (-1) -/* compression levels */ - -#define Z_FILTERED 1 -#define Z_HUFFMAN_ONLY 2 -#define Z_RLE 3 -#define Z_FIXED 4 -#define Z_DEFAULT_STRATEGY 0 -/* compression strategy; see deflateInit2() below for details */ - -#define Z_BINARY 0 -#define Z_TEXT 1 -#define Z_ASCII Z_TEXT /* for compatibility with 1.2.2 and earlier */ -#define Z_UNKNOWN 2 -/* Possible values of the data_type field (though see inflate()) */ - -#define Z_DEFLATED 8 -/* The deflate compression method (the only one supported in this version) */ - -#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */ - -#define zlib_version zlibVersion() -/* for compatibility with versions < 1.0.2 */ - - - /* basic functions */ - -ZEXTERN const char * ZEXPORT zlibVersion OF((void)); -/* The application can compare zlibVersion and ZLIB_VERSION for consistency. - If the first character differs, the library code actually used is not - compatible with the zlib.h header file used by the application. This check - is automatically made by deflateInit and inflateInit. - */ - -/* -ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level)); - - Initializes the internal stream state for compression. The fields - zalloc, zfree and opaque must be initialized before by the caller. If - zalloc and zfree are set to Z_NULL, deflateInit updates them to use default - allocation functions. - - The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9: - 1 gives best speed, 9 gives best compression, 0 gives no compression at all - (the input data is simply copied a block at a time). Z_DEFAULT_COMPRESSION - requests a default compromise between speed and compression (currently - equivalent to level 6). - - deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_STREAM_ERROR if level is not a valid compression level, or - Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible - with the version assumed by the caller (ZLIB_VERSION). msg is set to null - if there is no error message. deflateInit does not perform any compression: - this will be done by deflate(). -*/ - - -ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush)); -/* - deflate compresses as much data as possible, and stops when the input - buffer becomes empty or the output buffer becomes full. It may introduce - some output latency (reading input without producing any output) except when - forced to flush. - - The detailed semantics are as follows. deflate performs one or both of the - following actions: - - - Compress more input starting at next_in and update next_in and avail_in - accordingly. If not all input can be processed (because there is not - enough room in the output buffer), next_in and avail_in are updated and - processing will resume at this point for the next call of deflate(). - - - Provide more output starting at next_out and update next_out and avail_out - accordingly. This action is forced if the parameter flush is non zero. - Forcing flush frequently degrades the compression ratio, so this parameter - should be set only when necessary (in interactive applications). Some - output may be provided even if flush is not set. - - Before the call of deflate(), the application should ensure that at least - one of the actions is possible, by providing more input and/or consuming more - output, and updating avail_in or avail_out accordingly; avail_out should - never be zero before the call. The application can consume the compressed - output when it wants, for example when the output buffer is full (avail_out - == 0), or after each call of deflate(). If deflate returns Z_OK and with - zero avail_out, it must be called again after making room in the output - buffer because there might be more output pending. - - Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to - decide how much data to accumulate before producing output, in order to - maximize compression. - - If the parameter flush is set to Z_SYNC_FLUSH, all pending output is - flushed to the output buffer and the output is aligned on a byte boundary, so - that the decompressor can get all input data available so far. (In - particular avail_in is zero after the call if enough output space has been - provided before the call.) Flushing may degrade compression for some - compression algorithms and so it should be used only when necessary. This - completes the current deflate block and follows it with an empty stored block - that is three bits plus filler bits to the next byte, followed by four bytes - (00 00 ff ff). - - If flush is set to Z_PARTIAL_FLUSH, all pending output is flushed to the - output buffer, but the output is not aligned to a byte boundary. All of the - input data so far will be available to the decompressor, as for Z_SYNC_FLUSH. - This completes the current deflate block and follows it with an empty fixed - codes block that is 10 bits long. This assures that enough bytes are output - in order for the decompressor to finish the block before the empty fixed code - block. - - If flush is set to Z_BLOCK, a deflate block is completed and emitted, as - for Z_SYNC_FLUSH, but the output is not aligned on a byte boundary, and up to - seven bits of the current block are held to be written as the next byte after - the next deflate block is completed. In this case, the decompressor may not - be provided enough bits at this point in order to complete decompression of - the data provided so far to the compressor. It may need to wait for the next - block to be emitted. This is for advanced applications that need to control - the emission of deflate blocks. - - If flush is set to Z_FULL_FLUSH, all output is flushed as with - Z_SYNC_FLUSH, and the compression state is reset so that decompression can - restart from this point if previous compressed data has been damaged or if - random access is desired. Using Z_FULL_FLUSH too often can seriously degrade - compression. - - If deflate returns with avail_out == 0, this function must be called again - with the same value of the flush parameter and more output space (updated - avail_out), until the flush is complete (deflate returns with non-zero - avail_out). In the case of a Z_FULL_FLUSH or Z_SYNC_FLUSH, make sure that - avail_out is greater than six to avoid repeated flush markers due to - avail_out == 0 on return. - - If the parameter flush is set to Z_FINISH, pending input is processed, - pending output is flushed and deflate returns with Z_STREAM_END if there was - enough output space; if deflate returns with Z_OK, this function must be - called again with Z_FINISH and more output space (updated avail_out) but no - more input data, until it returns with Z_STREAM_END or an error. After - deflate has returned Z_STREAM_END, the only possible operations on the stream - are deflateReset or deflateEnd. - - Z_FINISH can be used immediately after deflateInit if all the compression - is to be done in a single step. In this case, avail_out must be at least the - value returned by deflateBound (see below). Then deflate is guaranteed to - return Z_STREAM_END. If not enough output space is provided, deflate will - not return Z_STREAM_END, and it must be called again as described above. - - deflate() sets strm->adler to the adler32 checksum of all input read - so far (that is, total_in bytes). - - deflate() may update strm->data_type if it can make a good guess about - the input data type (Z_BINARY or Z_TEXT). In doubt, the data is considered - binary. This field is only for information purposes and does not affect the - compression algorithm in any manner. - - deflate() returns Z_OK if some progress has been made (more input - processed or more output produced), Z_STREAM_END if all input has been - consumed and all output has been produced (only when flush is set to - Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example - if next_in or next_out was Z_NULL), Z_BUF_ERROR if no progress is possible - (for example avail_in or avail_out was zero). Note that Z_BUF_ERROR is not - fatal, and deflate() can be called again with more input and more output - space to continue compressing. -*/ - - -ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm)); -/* - All dynamically allocated data structures for this stream are freed. - This function discards any unprocessed input and does not flush any pending - output. - - deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the - stream state was inconsistent, Z_DATA_ERROR if the stream was freed - prematurely (some input or output was discarded). In the error case, msg - may be set but then points to a static string (which must not be - deallocated). -*/ - - -/* -ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm)); - - Initializes the internal stream state for decompression. The fields - next_in, avail_in, zalloc, zfree and opaque must be initialized before by - the caller. If next_in is not Z_NULL and avail_in is large enough (the - exact value depends on the compression method), inflateInit determines the - compression method from the zlib header and allocates all data structures - accordingly; otherwise the allocation will be deferred to the first call of - inflate. If zalloc and zfree are set to Z_NULL, inflateInit updates them to - use default allocation functions. - - inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_VERSION_ERROR if the zlib library version is incompatible with the - version assumed by the caller, or Z_STREAM_ERROR if the parameters are - invalid, such as a null pointer to the structure. msg is set to null if - there is no error message. inflateInit does not perform any decompression - apart from possibly reading the zlib header if present: actual decompression - will be done by inflate(). (So next_in and avail_in may be modified, but - next_out and avail_out are unused and unchanged.) The current implementation - of inflateInit() does not process any header information -- that is deferred - until inflate() is called. -*/ - - -ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush)); -/* - inflate decompresses as much data as possible, and stops when the input - buffer becomes empty or the output buffer becomes full. It may introduce - some output latency (reading input without producing any output) except when - forced to flush. - - The detailed semantics are as follows. inflate performs one or both of the - following actions: - - - Decompress more input starting at next_in and update next_in and avail_in - accordingly. If not all input can be processed (because there is not - enough room in the output buffer), next_in is updated and processing will - resume at this point for the next call of inflate(). - - - Provide more output starting at next_out and update next_out and avail_out - accordingly. inflate() provides as much output as possible, until there is - no more input data or no more space in the output buffer (see below about - the flush parameter). - - Before the call of inflate(), the application should ensure that at least - one of the actions is possible, by providing more input and/or consuming more - output, and updating the next_* and avail_* values accordingly. The - application can consume the uncompressed output when it wants, for example - when the output buffer is full (avail_out == 0), or after each call of - inflate(). If inflate returns Z_OK and with zero avail_out, it must be - called again after making room in the output buffer because there might be - more output pending. - - The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH, Z_FINISH, - Z_BLOCK, or Z_TREES. Z_SYNC_FLUSH requests that inflate() flush as much - output as possible to the output buffer. Z_BLOCK requests that inflate() - stop if and when it gets to the next deflate block boundary. When decoding - the zlib or gzip format, this will cause inflate() to return immediately - after the header and before the first block. When doing a raw inflate, - inflate() will go ahead and process the first block, and will return when it - gets to the end of that block, or when it runs out of data. - - The Z_BLOCK option assists in appending to or combining deflate streams. - Also to assist in this, on return inflate() will set strm->data_type to the - number of unused bits in the last byte taken from strm->next_in, plus 64 if - inflate() is currently decoding the last block in the deflate stream, plus - 128 if inflate() returned immediately after decoding an end-of-block code or - decoding the complete header up to just before the first byte of the deflate - stream. The end-of-block will not be indicated until all of the uncompressed - data from that block has been written to strm->next_out. The number of - unused bits may in general be greater than seven, except when bit 7 of - data_type is set, in which case the number of unused bits will be less than - eight. data_type is set as noted here every time inflate() returns for all - flush options, and so can be used to determine the amount of currently - consumed input in bits. - - The Z_TREES option behaves as Z_BLOCK does, but it also returns when the - end of each deflate block header is reached, before any actual data in that - block is decoded. This allows the caller to determine the length of the - deflate block header for later use in random access within a deflate block. - 256 is added to the value of strm->data_type when inflate() returns - immediately after reaching the end of the deflate block header. - - inflate() should normally be called until it returns Z_STREAM_END or an - error. However if all decompression is to be performed in a single step (a - single call of inflate), the parameter flush should be set to Z_FINISH. In - this case all pending input is processed and all pending output is flushed; - avail_out must be large enough to hold all the uncompressed data. (The size - of the uncompressed data may have been saved by the compressor for this - purpose.) The next operation on this stream must be inflateEnd to deallocate - the decompression state. The use of Z_FINISH is not required to perform an - inflation in one step. However it may be used to inform inflate that a - faster approach can be used for the single inflate() call. Z_FINISH also - informs inflate to not maintain a sliding window if the stream completes, - which reduces inflate's memory footprint. - - In this implementation, inflate() always flushes as much output as - possible to the output buffer, and always uses the faster approach on the - first call. So the effects of the flush parameter in this implementation are - on the return value of inflate() as noted below, when inflate() returns early - when Z_BLOCK or Z_TREES is used, and when inflate() avoids the allocation of - memory for a sliding window when Z_FINISH is used. - - If a preset dictionary is needed after this call (see inflateSetDictionary - below), inflate sets strm->adler to the Adler-32 checksum of the dictionary - chosen by the compressor and returns Z_NEED_DICT; otherwise it sets - strm->adler to the Adler-32 checksum of all output produced so far (that is, - total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described - below. At the end of the stream, inflate() checks that its computed adler32 - checksum is equal to that saved by the compressor and returns Z_STREAM_END - only if the checksum is correct. - - inflate() can decompress and check either zlib-wrapped or gzip-wrapped - deflate data. The header type is detected automatically, if requested when - initializing with inflateInit2(). Any information contained in the gzip - header is not retained, so applications that need that information should - instead use raw inflate, see inflateInit2() below, or inflateBack() and - perform their own processing of the gzip header and trailer. When processing - gzip-wrapped deflate data, strm->adler32 is set to the CRC-32 of the output - producted so far. The CRC-32 is checked against the gzip trailer. - - inflate() returns Z_OK if some progress has been made (more input processed - or more output produced), Z_STREAM_END if the end of the compressed data has - been reached and all uncompressed output has been produced, Z_NEED_DICT if a - preset dictionary is needed at this point, Z_DATA_ERROR if the input data was - corrupted (input stream not conforming to the zlib format or incorrect check - value), Z_STREAM_ERROR if the stream structure was inconsistent (for example - next_in or next_out was Z_NULL), Z_MEM_ERROR if there was not enough memory, - Z_BUF_ERROR if no progress is possible or if there was not enough room in the - output buffer when Z_FINISH is used. Note that Z_BUF_ERROR is not fatal, and - inflate() can be called again with more input and more output space to - continue decompressing. If Z_DATA_ERROR is returned, the application may - then call inflateSync() to look for a good compression block if a partial - recovery of the data is desired. -*/ - - -ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm)); -/* - All dynamically allocated data structures for this stream are freed. - This function discards any unprocessed input and does not flush any pending - output. - - inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state - was inconsistent. In the error case, msg may be set but then points to a - static string (which must not be deallocated). -*/ - - - /* Advanced functions */ - -/* - The following functions are needed only in some special applications. -*/ - -/* -ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm, - int level, - int method, - int windowBits, - int memLevel, - int strategy)); - - This is another version of deflateInit with more compression options. The - fields next_in, zalloc, zfree and opaque must be initialized before by the - caller. - - The method parameter is the compression method. It must be Z_DEFLATED in - this version of the library. - - The windowBits parameter is the base two logarithm of the window size - (the size of the history buffer). It should be in the range 8..15 for this - version of the library. Larger values of this parameter result in better - compression at the expense of memory usage. The default value is 15 if - deflateInit is used instead. - - windowBits can also be -8..-15 for raw deflate. In this case, -windowBits - determines the window size. deflate() will then generate raw deflate data - with no zlib header or trailer, and will not compute an adler32 check value. - - windowBits can also be greater than 15 for optional gzip encoding. Add - 16 to windowBits to write a simple gzip header and trailer around the - compressed data instead of a zlib wrapper. The gzip header will have no - file name, no extra data, no comment, no modification time (set to zero), no - header crc, and the operating system will be set to 255 (unknown). If a - gzip stream is being written, strm->adler is a crc32 instead of an adler32. - - The memLevel parameter specifies how much memory should be allocated - for the internal compression state. memLevel=1 uses minimum memory but is - slow and reduces compression ratio; memLevel=9 uses maximum memory for - optimal speed. The default value is 8. See zconf.h for total memory usage - as a function of windowBits and memLevel. - - The strategy parameter is used to tune the compression algorithm. Use the - value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a - filter (or predictor), Z_HUFFMAN_ONLY to force Huffman encoding only (no - string match), or Z_RLE to limit match distances to one (run-length - encoding). Filtered data consists mostly of small values with a somewhat - random distribution. In this case, the compression algorithm is tuned to - compress them better. The effect of Z_FILTERED is to force more Huffman - coding and less string matching; it is somewhat intermediate between - Z_DEFAULT_STRATEGY and Z_HUFFMAN_ONLY. Z_RLE is designed to be almost as - fast as Z_HUFFMAN_ONLY, but give better compression for PNG image data. The - strategy parameter only affects the compression ratio but not the - correctness of the compressed output even if it is not set appropriately. - Z_FIXED prevents the use of dynamic Huffman codes, allowing for a simpler - decoder for special applications. - - deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_STREAM_ERROR if any parameter is invalid (such as an invalid - method), or Z_VERSION_ERROR if the zlib library version (zlib_version) is - incompatible with the version assumed by the caller (ZLIB_VERSION). msg is - set to null if there is no error message. deflateInit2 does not perform any - compression: this will be done by deflate(). -*/ - -ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm, - const Bytef *dictionary, - uInt dictLength)); -/* - Initializes the compression dictionary from the given byte sequence - without producing any compressed output. When using the zlib format, this - function must be called immediately after deflateInit, deflateInit2 or - deflateReset, and before any call of deflate. When doing raw deflate, this - function must be called either before any call of deflate, or immediately - after the completion of a deflate block, i.e. after all input has been - consumed and all output has been delivered when using any of the flush - options Z_BLOCK, Z_PARTIAL_FLUSH, Z_SYNC_FLUSH, or Z_FULL_FLUSH. The - compressor and decompressor must use exactly the same dictionary (see - inflateSetDictionary). - - The dictionary should consist of strings (byte sequences) that are likely - to be encountered later in the data to be compressed, with the most commonly - used strings preferably put towards the end of the dictionary. Using a - dictionary is most useful when the data to be compressed is short and can be - predicted with good accuracy; the data can then be compressed better than - with the default empty dictionary. - - Depending on the size of the compression data structures selected by - deflateInit or deflateInit2, a part of the dictionary may in effect be - discarded, for example if the dictionary is larger than the window size - provided in deflateInit or deflateInit2. Thus the strings most likely to be - useful should be put at the end of the dictionary, not at the front. In - addition, the current implementation of deflate will use at most the window - size minus 262 bytes of the provided dictionary. - - Upon return of this function, strm->adler is set to the adler32 value - of the dictionary; the decompressor may later use this value to determine - which dictionary has been used by the compressor. (The adler32 value - applies to the whole dictionary even if only a subset of the dictionary is - actually used by the compressor.) If a raw deflate was requested, then the - adler32 value is not computed and strm->adler is not set. - - deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a - parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is - inconsistent (for example if deflate has already been called for this stream - or if not at a block boundary for raw deflate). deflateSetDictionary does - not perform any compression: this will be done by deflate(). -*/ - -ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest, - z_streamp source)); -/* - Sets the destination stream as a complete copy of the source stream. - - This function can be useful when several compression strategies will be - tried, for example when there are several ways of pre-processing the input - data with a filter. The streams that will be discarded should then be freed - by calling deflateEnd. Note that deflateCopy duplicates the internal - compression state which can be quite large, so this strategy is slow and can - consume lots of memory. - - deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_STREAM_ERROR if the source stream state was inconsistent - (such as zalloc being Z_NULL). msg is left unchanged in both source and - destination. -*/ - -ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm)); -/* - This function is equivalent to deflateEnd followed by deflateInit, - but does not free and reallocate all the internal compression state. The - stream will keep the same compression level and any other attributes that - may have been set by deflateInit2. - - deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent (such as zalloc or state being Z_NULL). -*/ - -ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm, - int level, - int strategy)); -/* - Dynamically update the compression level and compression strategy. The - interpretation of level and strategy is as in deflateInit2. This can be - used to switch between compression and straight copy of the input data, or - to switch to a different kind of input data requiring a different strategy. - If the compression level is changed, the input available so far is - compressed with the old level (and may be flushed); the new level will take - effect only at the next call of deflate(). - - Before the call of deflateParams, the stream state must be set as for - a call of deflate(), since the currently available input may have to be - compressed and flushed. In particular, strm->avail_out must be non-zero. - - deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source - stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR if - strm->avail_out was zero. -*/ - -ZEXTERN int ZEXPORT deflateTune OF((z_streamp strm, - int good_length, - int max_lazy, - int nice_length, - int max_chain)); -/* - Fine tune deflate's internal compression parameters. This should only be - used by someone who understands the algorithm used by zlib's deflate for - searching for the best matching string, and even then only by the most - fanatic optimizer trying to squeeze out the last compressed bit for their - specific input data. Read the deflate.c source code for the meaning of the - max_lazy, good_length, nice_length, and max_chain parameters. - - deflateTune() can be called after deflateInit() or deflateInit2(), and - returns Z_OK on success, or Z_STREAM_ERROR for an invalid deflate stream. - */ - -ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm, - uLong sourceLen)); -/* - deflateBound() returns an upper bound on the compressed size after - deflation of sourceLen bytes. It must be called after deflateInit() or - deflateInit2(), and after deflateSetHeader(), if used. This would be used - to allocate an output buffer for deflation in a single pass, and so would be - called before deflate(). If that first deflate() call is provided the - sourceLen input bytes, an output buffer allocated to the size returned by - deflateBound(), and the flush value Z_FINISH, then deflate() is guaranteed - to return Z_STREAM_END. Note that it is possible for the compressed size to - be larger than the value returned by deflateBound() if flush options other - than Z_FINISH or Z_NO_FLUSH are used. -*/ - -ZEXTERN int ZEXPORT deflatePending OF((z_streamp strm, - unsigned *pending, - int *bits)); -/* - deflatePending() returns the number of bytes and bits of output that have - been generated, but not yet provided in the available output. The bytes not - provided would be due to the available output space having being consumed. - The number of bits of output not provided are between 0 and 7, where they - await more bits to join them in order to fill out a full byte. If pending - or bits are Z_NULL, then those values are not set. - - deflatePending returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent. - */ - -ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm, - int bits, - int value)); -/* - deflatePrime() inserts bits in the deflate output stream. The intent - is that this function is used to start off the deflate output with the bits - leftover from a previous deflate stream when appending to it. As such, this - function can only be used for raw deflate, and must be used before the first - deflate() call after a deflateInit2() or deflateReset(). bits must be less - than or equal to 16, and that many of the least significant bits of value - will be inserted in the output. - - deflatePrime returns Z_OK if success, Z_BUF_ERROR if there was not enough - room in the internal buffer to insert the bits, or Z_STREAM_ERROR if the - source stream state was inconsistent. -*/ - -ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm, - gz_headerp head)); -/* - deflateSetHeader() provides gzip header information for when a gzip - stream is requested by deflateInit2(). deflateSetHeader() may be called - after deflateInit2() or deflateReset() and before the first call of - deflate(). The text, time, os, extra field, name, and comment information - in the provided gz_header structure are written to the gzip header (xflag is - ignored -- the extra flags are set according to the compression level). The - caller must assure that, if not Z_NULL, name and comment are terminated with - a zero byte, and that if extra is not Z_NULL, that extra_len bytes are - available there. If hcrc is true, a gzip header crc is included. Note that - the current versions of the command-line version of gzip (up through version - 1.3.x) do not support header crc's, and will report that it is a "multi-part - gzip file" and give up. - - If deflateSetHeader is not used, the default gzip header has text false, - the time set to zero, and os set to 255, with no extra, name, or comment - fields. The gzip header is returned to the default state by deflateReset(). - - deflateSetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent. -*/ - -/* -ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm, - int windowBits)); - - This is another version of inflateInit with an extra parameter. The - fields next_in, avail_in, zalloc, zfree and opaque must be initialized - before by the caller. - - The windowBits parameter is the base two logarithm of the maximum window - size (the size of the history buffer). It should be in the range 8..15 for - this version of the library. The default value is 15 if inflateInit is used - instead. windowBits must be greater than or equal to the windowBits value - provided to deflateInit2() while compressing, or it must be equal to 15 if - deflateInit2() was not used. If a compressed stream with a larger window - size is given as input, inflate() will return with the error code - Z_DATA_ERROR instead of trying to allocate a larger window. - - windowBits can also be zero to request that inflate use the window size in - the zlib header of the compressed stream. - - windowBits can also be -8..-15 for raw inflate. In this case, -windowBits - determines the window size. inflate() will then process raw deflate data, - not looking for a zlib or gzip header, not generating a check value, and not - looking for any check values for comparison at the end of the stream. This - is for use with other formats that use the deflate compressed data format - such as zip. Those formats provide their own check values. If a custom - format is developed using the raw deflate format for compressed data, it is - recommended that a check value such as an adler32 or a crc32 be applied to - the uncompressed data as is done in the zlib, gzip, and zip formats. For - most applications, the zlib format should be used as is. Note that comments - above on the use in deflateInit2() applies to the magnitude of windowBits. - - windowBits can also be greater than 15 for optional gzip decoding. Add - 32 to windowBits to enable zlib and gzip decoding with automatic header - detection, or add 16 to decode only the gzip format (the zlib format will - return a Z_DATA_ERROR). If a gzip stream is being decoded, strm->adler is a - crc32 instead of an adler32. - - inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_VERSION_ERROR if the zlib library version is incompatible with the - version assumed by the caller, or Z_STREAM_ERROR if the parameters are - invalid, such as a null pointer to the structure. msg is set to null if - there is no error message. inflateInit2 does not perform any decompression - apart from possibly reading the zlib header if present: actual decompression - will be done by inflate(). (So next_in and avail_in may be modified, but - next_out and avail_out are unused and unchanged.) The current implementation - of inflateInit2() does not process any header information -- that is - deferred until inflate() is called. -*/ - -ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm, - const Bytef *dictionary, - uInt dictLength)); -/* - Initializes the decompression dictionary from the given uncompressed byte - sequence. This function must be called immediately after a call of inflate, - if that call returned Z_NEED_DICT. The dictionary chosen by the compressor - can be determined from the adler32 value returned by that call of inflate. - The compressor and decompressor must use exactly the same dictionary (see - deflateSetDictionary). For raw inflate, this function can be called at any - time to set the dictionary. If the provided dictionary is smaller than the - window and there is already data in the window, then the provided dictionary - will amend what's there. The application must insure that the dictionary - that was used for compression is provided. - - inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a - parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is - inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the - expected one (incorrect adler32 value). inflateSetDictionary does not - perform any decompression: this will be done by subsequent calls of - inflate(). -*/ - -ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm)); -/* - Skips invalid compressed data until a possible full flush point (see above - for the description of deflate with Z_FULL_FLUSH) can be found, or until all - available input is skipped. No output is provided. - - inflateSync searches for a 00 00 FF FF pattern in the compressed data. - All full flush points have this pattern, but not all occurences of this - pattern are full flush points. - - inflateSync returns Z_OK if a possible full flush point has been found, - Z_BUF_ERROR if no more input was provided, Z_DATA_ERROR if no flush point - has been found, or Z_STREAM_ERROR if the stream structure was inconsistent. - In the success case, the application may save the current current value of - total_in which indicates where valid compressed data was found. In the - error case, the application may repeatedly call inflateSync, providing more - input each time, until success or end of the input data. -*/ - -ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest, - z_streamp source)); -/* - Sets the destination stream as a complete copy of the source stream. - - This function can be useful when randomly accessing a large stream. The - first pass through the stream can periodically record the inflate state, - allowing restarting inflate at those points when randomly accessing the - stream. - - inflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_STREAM_ERROR if the source stream state was inconsistent - (such as zalloc being Z_NULL). msg is left unchanged in both source and - destination. -*/ - -ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm)); -/* - This function is equivalent to inflateEnd followed by inflateInit, - but does not free and reallocate all the internal decompression state. The - stream will keep attributes that may have been set by inflateInit2. - - inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent (such as zalloc or state being Z_NULL). -*/ - -ZEXTERN int ZEXPORT inflateReset2 OF((z_streamp strm, - int windowBits)); -/* - This function is the same as inflateReset, but it also permits changing - the wrap and window size requests. The windowBits parameter is interpreted - the same as it is for inflateInit2. - - inflateReset2 returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent (such as zalloc or state being Z_NULL), or if - the windowBits parameter is invalid. -*/ - -ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm, - int bits, - int value)); -/* - This function inserts bits in the inflate input stream. The intent is - that this function is used to start inflating at a bit position in the - middle of a byte. The provided bits will be used before any bytes are used - from next_in. This function should only be used with raw inflate, and - should be used before the first inflate() call after inflateInit2() or - inflateReset(). bits must be less than or equal to 16, and that many of the - least significant bits of value will be inserted in the input. - - If bits is negative, then the input stream bit buffer is emptied. Then - inflatePrime() can be called again to put bits in the buffer. This is used - to clear out bits leftover after feeding inflate a block description prior - to feeding inflate codes. - - inflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent. -*/ - -ZEXTERN long ZEXPORT inflateMark OF((z_streamp strm)); -/* - This function returns two values, one in the lower 16 bits of the return - value, and the other in the remaining upper bits, obtained by shifting the - return value down 16 bits. If the upper value is -1 and the lower value is - zero, then inflate() is currently decoding information outside of a block. - If the upper value is -1 and the lower value is non-zero, then inflate is in - the middle of a stored block, with the lower value equaling the number of - bytes from the input remaining to copy. If the upper value is not -1, then - it is the number of bits back from the current bit position in the input of - the code (literal or length/distance pair) currently being processed. In - that case the lower value is the number of bytes already emitted for that - code. - - A code is being processed if inflate is waiting for more input to complete - decoding of the code, or if it has completed decoding but is waiting for - more output space to write the literal or match data. - - inflateMark() is used to mark locations in the input data for random - access, which may be at bit positions, and to note those cases where the - output of a code may span boundaries of random access blocks. The current - location in the input stream can be determined from avail_in and data_type - as noted in the description for the Z_BLOCK flush parameter for inflate. - - inflateMark returns the value noted above or -1 << 16 if the provided - source stream state was inconsistent. -*/ - -ZEXTERN int ZEXPORT inflateGetHeader OF((z_streamp strm, - gz_headerp head)); -/* - inflateGetHeader() requests that gzip header information be stored in the - provided gz_header structure. inflateGetHeader() may be called after - inflateInit2() or inflateReset(), and before the first call of inflate(). - As inflate() processes the gzip stream, head->done is zero until the header - is completed, at which time head->done is set to one. If a zlib stream is - being decoded, then head->done is set to -1 to indicate that there will be - no gzip header information forthcoming. Note that Z_BLOCK or Z_TREES can be - used to force inflate() to return immediately after header processing is - complete and before any actual data is decompressed. - - The text, time, xflags, and os fields are filled in with the gzip header - contents. hcrc is set to true if there is a header CRC. (The header CRC - was valid if done is set to one.) If extra is not Z_NULL, then extra_max - contains the maximum number of bytes to write to extra. Once done is true, - extra_len contains the actual extra field length, and extra contains the - extra field, or that field truncated if extra_max is less than extra_len. - If name is not Z_NULL, then up to name_max characters are written there, - terminated with a zero unless the length is greater than name_max. If - comment is not Z_NULL, then up to comm_max characters are written there, - terminated with a zero unless the length is greater than comm_max. When any - of extra, name, or comment are not Z_NULL and the respective field is not - present in the header, then that field is set to Z_NULL to signal its - absence. This allows the use of deflateSetHeader() with the returned - structure to duplicate the header. However if those fields are set to - allocated memory, then the application will need to save those pointers - elsewhere so that they can be eventually freed. - - If inflateGetHeader is not used, then the header information is simply - discarded. The header is always checked for validity, including the header - CRC if present. inflateReset() will reset the process to discard the header - information. The application would need to call inflateGetHeader() again to - retrieve the header from the next gzip stream. - - inflateGetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent. -*/ - -/* -ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits, - unsigned char FAR *window)); - - Initialize the internal stream state for decompression using inflateBack() - calls. The fields zalloc, zfree and opaque in strm must be initialized - before the call. If zalloc and zfree are Z_NULL, then the default library- - derived memory allocation routines are used. windowBits is the base two - logarithm of the window size, in the range 8..15. window is a caller - supplied buffer of that size. Except for special applications where it is - assured that deflate was used with small window sizes, windowBits must be 15 - and a 32K byte window must be supplied to be able to decompress general - deflate streams. - - See inflateBack() for the usage of these routines. - - inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of - the parameters are invalid, Z_MEM_ERROR if the internal state could not be - allocated, or Z_VERSION_ERROR if the version of the library does not match - the version of the header file. -*/ - -typedef unsigned (*in_func) OF((void FAR *, unsigned char FAR * FAR *)); -typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned)); - -ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm, - in_func in, void FAR *in_desc, - out_func out, void FAR *out_desc)); -/* - inflateBack() does a raw inflate with a single call using a call-back - interface for input and output. This is more efficient than inflate() for - file i/o applications in that it avoids copying between the output and the - sliding window by simply making the window itself the output buffer. This - function trusts the application to not change the output buffer passed by - the output function, at least until inflateBack() returns. - - inflateBackInit() must be called first to allocate the internal state - and to initialize the state with the user-provided window buffer. - inflateBack() may then be used multiple times to inflate a complete, raw - deflate stream with each call. inflateBackEnd() is then called to free the - allocated state. - - A raw deflate stream is one with no zlib or gzip header or trailer. - This routine would normally be used in a utility that reads zip or gzip - files and writes out uncompressed files. The utility would decode the - header and process the trailer on its own, hence this routine expects only - the raw deflate stream to decompress. This is different from the normal - behavior of inflate(), which expects either a zlib or gzip header and - trailer around the deflate stream. - - inflateBack() uses two subroutines supplied by the caller that are then - called by inflateBack() for input and output. inflateBack() calls those - routines until it reads a complete deflate stream and writes out all of the - uncompressed data, or until it encounters an error. The function's - parameters and return types are defined above in the in_func and out_func - typedefs. inflateBack() will call in(in_desc, &buf) which should return the - number of bytes of provided input, and a pointer to that input in buf. If - there is no input available, in() must return zero--buf is ignored in that - case--and inflateBack() will return a buffer error. inflateBack() will call - out(out_desc, buf, len) to write the uncompressed data buf[0..len-1]. out() - should return zero on success, or non-zero on failure. If out() returns - non-zero, inflateBack() will return with an error. Neither in() nor out() - are permitted to change the contents of the window provided to - inflateBackInit(), which is also the buffer that out() uses to write from. - The length written by out() will be at most the window size. Any non-zero - amount of input may be provided by in(). - - For convenience, inflateBack() can be provided input on the first call by - setting strm->next_in and strm->avail_in. If that input is exhausted, then - in() will be called. Therefore strm->next_in must be initialized before - calling inflateBack(). If strm->next_in is Z_NULL, then in() will be called - immediately for input. If strm->next_in is not Z_NULL, then strm->avail_in - must also be initialized, and then if strm->avail_in is not zero, input will - initially be taken from strm->next_in[0 .. strm->avail_in - 1]. - - The in_desc and out_desc parameters of inflateBack() is passed as the - first parameter of in() and out() respectively when they are called. These - descriptors can be optionally used to pass any information that the caller- - supplied in() and out() functions need to do their job. - - On return, inflateBack() will set strm->next_in and strm->avail_in to - pass back any unused input that was provided by the last in() call. The - return values of inflateBack() can be Z_STREAM_END on success, Z_BUF_ERROR - if in() or out() returned an error, Z_DATA_ERROR if there was a format error - in the deflate stream (in which case strm->msg is set to indicate the nature - of the error), or Z_STREAM_ERROR if the stream was not properly initialized. - In the case of Z_BUF_ERROR, an input or output error can be distinguished - using strm->next_in which will be Z_NULL only if in() returned an error. If - strm->next_in is not Z_NULL, then the Z_BUF_ERROR was due to out() returning - non-zero. (in() will always be called before out(), so strm->next_in is - assured to be defined if out() returns non-zero.) Note that inflateBack() - cannot return Z_OK. -*/ - -ZEXTERN int ZEXPORT inflateBackEnd OF((z_streamp strm)); -/* - All memory allocated by inflateBackInit() is freed. - - inflateBackEnd() returns Z_OK on success, or Z_STREAM_ERROR if the stream - state was inconsistent. -*/ - -ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void)); -/* Return flags indicating compile-time options. - - Type sizes, two bits each, 00 = 16 bits, 01 = 32, 10 = 64, 11 = other: - 1.0: size of uInt - 3.2: size of uLong - 5.4: size of voidpf (pointer) - 7.6: size of z_off_t - - Compiler, assembler, and debug options: - 8: DEBUG - 9: ASMV or ASMINF -- use ASM code - 10: ZLIB_WINAPI -- exported functions use the WINAPI calling convention - 11: 0 (reserved) - - One-time table building (smaller code, but not thread-safe if true): - 12: BUILDFIXED -- build static block decoding tables when needed - 13: DYNAMIC_CRC_TABLE -- build CRC calculation tables when needed - 14,15: 0 (reserved) - - Library content (indicates missing functionality): - 16: NO_GZCOMPRESS -- gz* functions cannot compress (to avoid linking - deflate code when not needed) - 17: NO_GZIP -- deflate can't write gzip streams, and inflate can't detect - and decode gzip streams (to avoid linking crc code) - 18-19: 0 (reserved) - - Operation variations (changes in library functionality): - 20: PKZIP_BUG_WORKAROUND -- slightly more permissive inflate - 21: FASTEST -- deflate algorithm with only one, lowest compression level - 22,23: 0 (reserved) - - The sprintf variant used by gzprintf (zero is best): - 24: 0 = vs*, 1 = s* -- 1 means limited to 20 arguments after the format - 25: 0 = *nprintf, 1 = *printf -- 1 means gzprintf() not secure! - 26: 0 = returns value, 1 = void -- 1 means inferred string length returned - - Remainder: - 27-31: 0 (reserved) - */ - -#ifndef Z_SOLO - - /* utility functions */ - -/* - The following utility functions are implemented on top of the basic - stream-oriented functions. To simplify the interface, some default options - are assumed (compression level and memory usage, standard memory allocation - functions). The source code of these utility functions can be modified if - you need special options. -*/ - -ZEXTERN int ZEXPORT compress OF((Bytef *dest, uLongf *destLen, - const Bytef *source, uLong sourceLen)); -/* - Compresses the source buffer into the destination buffer. sourceLen is - the byte length of the source buffer. Upon entry, destLen is the total size - of the destination buffer, which must be at least the value returned by - compressBound(sourceLen). Upon exit, destLen is the actual size of the - compressed buffer. - - compress returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_BUF_ERROR if there was not enough room in the output - buffer. -*/ - -ZEXTERN int ZEXPORT compress2 OF((Bytef *dest, uLongf *destLen, - const Bytef *source, uLong sourceLen, - int level)); -/* - Compresses the source buffer into the destination buffer. The level - parameter has the same meaning as in deflateInit. sourceLen is the byte - length of the source buffer. Upon entry, destLen is the total size of the - destination buffer, which must be at least the value returned by - compressBound(sourceLen). Upon exit, destLen is the actual size of the - compressed buffer. - - compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_BUF_ERROR if there was not enough room in the output buffer, - Z_STREAM_ERROR if the level parameter is invalid. -*/ - -ZEXTERN uLong ZEXPORT compressBound OF((uLong sourceLen)); -/* - compressBound() returns an upper bound on the compressed size after - compress() or compress2() on sourceLen bytes. It would be used before a - compress() or compress2() call to allocate the destination buffer. -*/ - -ZEXTERN int ZEXPORT uncompress OF((Bytef *dest, uLongf *destLen, - const Bytef *source, uLong sourceLen)); -/* - Decompresses the source buffer into the destination buffer. sourceLen is - the byte length of the source buffer. Upon entry, destLen is the total size - of the destination buffer, which must be large enough to hold the entire - uncompressed data. (The size of the uncompressed data must have been saved - previously by the compressor and transmitted to the decompressor by some - mechanism outside the scope of this compression library.) Upon exit, destLen - is the actual size of the uncompressed buffer. - - uncompress returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_BUF_ERROR if there was not enough room in the output - buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete. In - the case where there is not enough room, uncompress() will fill the output - buffer with the uncompressed data up to that point. -*/ - - /* gzip file access functions */ - -/* - This library supports reading and writing files in gzip (.gz) format with - an interface similar to that of stdio, using the functions that start with - "gz". The gzip format is different from the zlib format. gzip is a gzip - wrapper, documented in RFC 1952, wrapped around a deflate stream. -*/ - -typedef struct gzFile_s *gzFile; /* semi-opaque gzip file descriptor */ - -/* -ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode)); - - Opens a gzip (.gz) file for reading or writing. The mode parameter is as - in fopen ("rb" or "wb") but can also include a compression level ("wb9") or - a strategy: 'f' for filtered data as in "wb6f", 'h' for Huffman-only - compression as in "wb1h", 'R' for run-length encoding as in "wb1R", or 'F' - for fixed code compression as in "wb9F". (See the description of - deflateInit2 for more information about the strategy parameter.) 'T' will - request transparent writing or appending with no compression and not using - the gzip format. - - "a" can be used instead of "w" to request that the gzip stream that will - be written be appended to the file. "+" will result in an error, since - reading and writing to the same gzip file is not supported. - - These functions, as well as gzip, will read and decode a sequence of gzip - streams in a file. The append function of gzopen() can be used to create - such a file. (Also see gzflush() for another way to do this.) When - appending, gzopen does not test whether the file begins with a gzip stream, - nor does it look for the end of the gzip streams to begin appending. gzopen - will simply append a gzip stream to the existing file. - - gzopen can be used to read a file which is not in gzip format; in this - case gzread will directly read from the file without decompression. When - reading, this will be detected automatically by looking for the magic two- - byte gzip header. - - gzopen returns NULL if the file could not be opened, if there was - insufficient memory to allocate the gzFile state, or if an invalid mode was - specified (an 'r', 'w', or 'a' was not provided, or '+' was provided). - errno can be checked to determine if the reason gzopen failed was that the - file could not be opened. -*/ - -ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode)); -/* - gzdopen associates a gzFile with the file descriptor fd. File descriptors - are obtained from calls like open, dup, creat, pipe or fileno (if the file - has been previously opened with fopen). The mode parameter is as in gzopen. - - The next call of gzclose on the returned gzFile will also close the file - descriptor fd, just like fclose(fdopen(fd, mode)) closes the file descriptor - fd. If you want to keep fd open, use fd = dup(fd_keep); gz = gzdopen(fd, - mode);. The duplicated descriptor should be saved to avoid a leak, since - gzdopen does not close fd if it fails. If you are using fileno() to get the - file descriptor from a FILE *, then you will have to use dup() to avoid - double-close()ing the file descriptor. Both gzclose() and fclose() will - close the associated file descriptor, so they need to have different file - descriptors. - - gzdopen returns NULL if there was insufficient memory to allocate the - gzFile state, if an invalid mode was specified (an 'r', 'w', or 'a' was not - provided, or '+' was provided), or if fd is -1. The file descriptor is not - used until the next gz* read, write, seek, or close operation, so gzdopen - will not detect if fd is invalid (unless fd is -1). -*/ - -ZEXTERN int ZEXPORT gzbuffer OF((gzFile file, unsigned size)); -/* - Set the internal buffer size used by this library's functions. The - default buffer size is 8192 bytes. This function must be called after - gzopen() or gzdopen(), and before any other calls that read or write the - file. The buffer memory allocation is always deferred to the first read or - write. Two buffers are allocated, either both of the specified size when - writing, or one of the specified size and the other twice that size when - reading. A larger buffer size of, for example, 64K or 128K bytes will - noticeably increase the speed of decompression (reading). - - The new buffer size also affects the maximum length for gzprintf(). - - gzbuffer() returns 0 on success, or -1 on failure, such as being called - too late. -*/ - -ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy)); -/* - Dynamically update the compression level or strategy. See the description - of deflateInit2 for the meaning of these parameters. - - gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not - opened for writing. -*/ - -ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len)); -/* - Reads the given number of uncompressed bytes from the compressed file. If - the input file is not in gzip format, gzread copies the given number of - bytes into the buffer directly from the file. - - After reaching the end of a gzip stream in the input, gzread will continue - to read, looking for another gzip stream. Any number of gzip streams may be - concatenated in the input file, and will all be decompressed by gzread(). - If something other than a gzip stream is encountered after a gzip stream, - that remaining trailing garbage is ignored (and no error is returned). - - gzread can be used to read a gzip file that is being concurrently written. - Upon reaching the end of the input, gzread will return with the available - data. If the error code returned by gzerror is Z_OK or Z_BUF_ERROR, then - gzclearerr can be used to clear the end of file indicator in order to permit - gzread to be tried again. Z_OK indicates that a gzip stream was completed - on the last gzread. Z_BUF_ERROR indicates that the input file ended in the - middle of a gzip stream. Note that gzread does not return -1 in the event - of an incomplete gzip stream. This error is deferred until gzclose(), which - will return Z_BUF_ERROR if the last gzread ended in the middle of a gzip - stream. Alternatively, gzerror can be used before gzclose to detect this - case. - - gzread returns the number of uncompressed bytes actually read, less than - len for end of file, or -1 for error. -*/ - -ZEXTERN int ZEXPORT gzwrite OF((gzFile file, - voidpc buf, unsigned len)); -/* - Writes the given number of uncompressed bytes into the compressed file. - gzwrite returns the number of uncompressed bytes written or 0 in case of - error. -*/ - -ZEXTERN int ZEXPORTVA gzprintf Z_ARG((gzFile file, const char *format, ...)); -/* - Converts, formats, and writes the arguments to the compressed file under - control of the format string, as in fprintf. gzprintf returns the number of - uncompressed bytes actually written, or 0 in case of error. The number of - uncompressed bytes written is limited to 8191, or one less than the buffer - size given to gzbuffer(). The caller should assure that this limit is not - exceeded. If it is exceeded, then gzprintf() will return an error (0) with - nothing written. In this case, there may also be a buffer overflow with - unpredictable consequences, which is possible only if zlib was compiled with - the insecure functions sprintf() or vsprintf() because the secure snprintf() - or vsnprintf() functions were not available. This can be determined using - zlibCompileFlags(). -*/ - -ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s)); -/* - Writes the given null-terminated string to the compressed file, excluding - the terminating null character. - - gzputs returns the number of characters written, or -1 in case of error. -*/ - -ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len)); -/* - Reads bytes from the compressed file until len-1 characters are read, or a - newline character is read and transferred to buf, or an end-of-file - condition is encountered. If any characters are read or if len == 1, the - string is terminated with a null character. If no characters are read due - to an end-of-file or len < 1, then the buffer is left untouched. - - gzgets returns buf which is a null-terminated string, or it returns NULL - for end-of-file or in case of error. If there was an error, the contents at - buf are indeterminate. -*/ - -ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c)); -/* - Writes c, converted to an unsigned char, into the compressed file. gzputc - returns the value that was written, or -1 in case of error. -*/ - -ZEXTERN int ZEXPORT gzgetc OF((gzFile file)); -/* - Reads one byte from the compressed file. gzgetc returns this byte or -1 - in case of end of file or error. This is implemented as a macro for speed. - As such, it does not do all of the checking the other functions do. I.e. - it does not check to see if file is NULL, nor whether the structure file - points to has been clobbered or not. -*/ - -ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file)); -/* - Push one character back onto the stream to be read as the first character - on the next read. At least one character of push-back is allowed. - gzungetc() returns the character pushed, or -1 on failure. gzungetc() will - fail if c is -1, and may fail if a character has been pushed but not read - yet. If gzungetc is used immediately after gzopen or gzdopen, at least the - output buffer size of pushed characters is allowed. (See gzbuffer above.) - The pushed character will be discarded if the stream is repositioned with - gzseek() or gzrewind(). -*/ - -ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush)); -/* - Flushes all pending output into the compressed file. The parameter flush - is as in the deflate() function. The return value is the zlib error number - (see function gzerror below). gzflush is only permitted when writing. - - If the flush parameter is Z_FINISH, the remaining data is written and the - gzip stream is completed in the output. If gzwrite() is called again, a new - gzip stream will be started in the output. gzread() is able to read such - concatented gzip streams. - - gzflush should be called only when strictly necessary because it will - degrade compression if called too often. -*/ - -/* -ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file, - z_off_t offset, int whence)); - - Sets the starting position for the next gzread or gzwrite on the given - compressed file. The offset represents a number of bytes in the - uncompressed data stream. The whence parameter is defined as in lseek(2); - the value SEEK_END is not supported. - - If the file is opened for reading, this function is emulated but can be - extremely slow. If the file is opened for writing, only forward seeks are - supported; gzseek then compresses a sequence of zeroes up to the new - starting position. - - gzseek returns the resulting offset location as measured in bytes from - the beginning of the uncompressed stream, or -1 in case of error, in - particular if the file is opened for writing and the new starting position - would be before the current position. -*/ - -ZEXTERN int ZEXPORT gzrewind OF((gzFile file)); -/* - Rewinds the given file. This function is supported only for reading. - - gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET) -*/ - -/* -ZEXTERN z_off_t ZEXPORT gztell OF((gzFile file)); - - Returns the starting position for the next gzread or gzwrite on the given - compressed file. This position represents a number of bytes in the - uncompressed data stream, and is zero when starting, even if appending or - reading a gzip stream from the middle of a file using gzdopen(). - - gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR) -*/ - -/* -ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile file)); - - Returns the current offset in the file being read or written. This offset - includes the count of bytes that precede the gzip stream, for example when - appending or when using gzdopen() for reading. When reading, the offset - does not include as yet unused buffered input. This information can be used - for a progress indicator. On error, gzoffset() returns -1. -*/ - -ZEXTERN int ZEXPORT gzeof OF((gzFile file)); -/* - Returns true (1) if the end-of-file indicator has been set while reading, - false (0) otherwise. Note that the end-of-file indicator is set only if the - read tried to go past the end of the input, but came up short. Therefore, - just like feof(), gzeof() may return false even if there is no more data to - read, in the event that the last read request was for the exact number of - bytes remaining in the input file. This will happen if the input file size - is an exact multiple of the buffer size. - - If gzeof() returns true, then the read functions will return no more data, - unless the end-of-file indicator is reset by gzclearerr() and the input file - has grown since the previous end of file was detected. -*/ - -ZEXTERN int ZEXPORT gzdirect OF((gzFile file)); -/* - Returns true (1) if file is being copied directly while reading, or false - (0) if file is a gzip stream being decompressed. - - If the input file is empty, gzdirect() will return true, since the input - does not contain a gzip stream. - - If gzdirect() is used immediately after gzopen() or gzdopen() it will - cause buffers to be allocated to allow reading the file to determine if it - is a gzip file. Therefore if gzbuffer() is used, it should be called before - gzdirect(). - - When writing, gzdirect() returns true (1) if transparent writing was - requested ("wT" for the gzopen() mode), or false (0) otherwise. (Note: - gzdirect() is not needed when writing. Transparent writing must be - explicitly requested, so the application already knows the answer. When - linking statically, using gzdirect() will include all of the zlib code for - gzip file reading and decompression, which may not be desired.) -*/ - -ZEXTERN int ZEXPORT gzclose OF((gzFile file)); -/* - Flushes all pending output if necessary, closes the compressed file and - deallocates the (de)compression state. Note that once file is closed, you - cannot call gzerror with file, since its structures have been deallocated. - gzclose must not be called more than once on the same file, just as free - must not be called more than once on the same allocation. - - gzclose will return Z_STREAM_ERROR if file is not valid, Z_ERRNO on a - file operation error, Z_MEM_ERROR if out of memory, Z_BUF_ERROR if the - last read ended in the middle of a gzip stream, or Z_OK on success. -*/ - -ZEXTERN int ZEXPORT gzclose_r OF((gzFile file)); -ZEXTERN int ZEXPORT gzclose_w OF((gzFile file)); -/* - Same as gzclose(), but gzclose_r() is only for use when reading, and - gzclose_w() is only for use when writing or appending. The advantage to - using these instead of gzclose() is that they avoid linking in zlib - compression or decompression code that is not used when only reading or only - writing respectively. If gzclose() is used, then both compression and - decompression code will be included the application when linking to a static - zlib library. -*/ - -ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum)); -/* - Returns the error message for the last error which occurred on the given - compressed file. errnum is set to zlib error number. If an error occurred - in the file system and not in the compression library, errnum is set to - Z_ERRNO and the application may consult errno to get the exact error code. - - The application must not modify the returned string. Future calls to - this function may invalidate the previously returned string. If file is - closed, then the string previously returned by gzerror will no longer be - available. - - gzerror() should be used to distinguish errors from end-of-file for those - functions above that do not distinguish those cases in their return values. -*/ - -ZEXTERN void ZEXPORT gzclearerr OF((gzFile file)); -/* - Clears the error and end-of-file flags for file. This is analogous to the - clearerr() function in stdio. This is useful for continuing to read a gzip - file that is being written concurrently. -*/ - -#endif /* !Z_SOLO */ - - /* checksum functions */ - -/* - These functions are not related to compression but are exported - anyway because they might be useful in applications using the compression - library. -*/ - -ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len)); -/* - Update a running Adler-32 checksum with the bytes buf[0..len-1] and - return the updated checksum. If buf is Z_NULL, this function returns the - required initial value for the checksum. - - An Adler-32 checksum is almost as reliable as a CRC32 but can be computed - much faster. - - Usage example: - - uLong adler = adler32(0L, Z_NULL, 0); - - while (read_buffer(buffer, length) != EOF) { - adler = adler32(adler, buffer, length); - } - if (adler != original_adler) error(); -*/ - -/* -ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2, - z_off_t len2)); - - Combine two Adler-32 checksums into one. For two sequences of bytes, seq1 - and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for - each, adler1 and adler2. adler32_combine() returns the Adler-32 checksum of - seq1 and seq2 concatenated, requiring only adler1, adler2, and len2. Note - that the z_off_t type (like off_t) is a signed integer. If len2 is - negative, the result has no meaning or utility. -*/ - -ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len)); -/* - Update a running CRC-32 with the bytes buf[0..len-1] and return the - updated CRC-32. If buf is Z_NULL, this function returns the required - initial value for the for the crc. Pre- and post-conditioning (one's - complement) is performed within this function so it shouldn't be done by the - application. - - Usage example: - - uLong crc = crc32(0L, Z_NULL, 0); - - while (read_buffer(buffer, length) != EOF) { - crc = crc32(crc, buffer, length); - } - if (crc != original_crc) error(); -*/ - -/* -ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2)); - - Combine two CRC-32 check values into one. For two sequences of bytes, - seq1 and seq2 with lengths len1 and len2, CRC-32 check values were - calculated for each, crc1 and crc2. crc32_combine() returns the CRC-32 - check value of seq1 and seq2 concatenated, requiring only crc1, crc2, and - len2. -*/ - - - /* various hacks, don't look :) */ - -/* deflateInit and inflateInit are macros to allow checking the zlib version - * and the compiler's view of z_stream: - */ -ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level, - const char *version, int stream_size)); -ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm, - const char *version, int stream_size)); -ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int level, int method, - int windowBits, int memLevel, - int strategy, const char *version, - int stream_size)); -ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int windowBits, - const char *version, int stream_size)); -ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits, - unsigned char FAR *window, - const char *version, - int stream_size)); -#define deflateInit(strm, level) \ - deflateInit_((strm), (level), ZLIB_VERSION, (int)sizeof(z_stream)) -#define inflateInit(strm) \ - inflateInit_((strm), ZLIB_VERSION, (int)sizeof(z_stream)) -#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \ - deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\ - (strategy), ZLIB_VERSION, (int)sizeof(z_stream)) -#define inflateInit2(strm, windowBits) \ - inflateInit2_((strm), (windowBits), ZLIB_VERSION, \ - (int)sizeof(z_stream)) -#define inflateBackInit(strm, windowBits, window) \ - inflateBackInit_((strm), (windowBits), (window), \ - ZLIB_VERSION, (int)sizeof(z_stream)) - -#ifndef Z_SOLO - -/* gzgetc() macro and its supporting function and exposed data structure. Note - * that the real internal state is much larger than the exposed structure. - * This abbreviated structure exposes just enough for the gzgetc() macro. The - * user should not mess with these exposed elements, since their names or - * behavior could change in the future, perhaps even capriciously. They can - * only be used by the gzgetc() macro. You have been warned. - */ -struct gzFile_s { - unsigned have; - unsigned char *next; - z_off64_t pos; -}; -ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file)); -#define gzgetc(g) \ - ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : gzgetc_(g)) - -/* provide 64-bit offset functions if _LARGEFILE64_SOURCE defined, and/or - * change the regular functions to 64 bits if _FILE_OFFSET_BITS is 64 (if - * both are true, the application gets the *64 functions, and the regular - * functions are changed to 64 bits) -- in case these are set on systems - * without large file support, _LFS64_LARGEFILE must also be true - */ -#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0 - ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *)); - ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int)); - ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile)); - ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile)); - ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off64_t)); - ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off64_t)); -#endif - -#if !defined(ZLIB_INTERNAL) && _FILE_OFFSET_BITS-0 == 64 && _LFS64_LARGEFILE-0 -# ifdef Z_PREFIX_SET -# define z_gzopen z_gzopen64 -# define z_gzseek z_gzseek64 -# define z_gztell z_gztell64 -# define z_gzoffset z_gzoffset64 -# define z_adler32_combine z_adler32_combine64 -# define z_crc32_combine z_crc32_combine64 -# else -# define gzopen gzopen64 -# define gzseek gzseek64 -# define gztell gztell64 -# define gzoffset gzoffset64 -# define adler32_combine adler32_combine64 -# define crc32_combine crc32_combine64 -# endif -# ifndef _LARGEFILE64_SOURCE - ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *)); - ZEXTERN z_off_t ZEXPORT gzseek64 OF((gzFile, z_off_t, int)); - ZEXTERN z_off_t ZEXPORT gztell64 OF((gzFile)); - ZEXTERN z_off_t ZEXPORT gzoffset64 OF((gzFile)); - ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t)); - ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t)); -# endif -#else - ZEXTERN gzFile ZEXPORT gzopen OF((const char *, const char *)); - ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile, z_off_t, int)); - ZEXTERN z_off_t ZEXPORT gztell OF((gzFile)); - ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile)); - ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t)); - ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t)); -#endif - -#else /* Z_SOLO */ - - ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t)); - ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t)); - -#endif /* !Z_SOLO */ - -/* hack for buggy compilers */ -#if !defined(ZUTIL_H) && !defined(NO_DUMMY_DECL) - struct internal_state {int dummy;}; -#endif - -/* undocumented functions */ -ZEXTERN const char * ZEXPORT zError OF((int)); -ZEXTERN int ZEXPORT inflateSyncPoint OF((z_streamp)); -ZEXTERN const uLongf * ZEXPORT get_crc_table OF((void)); -ZEXTERN int ZEXPORT inflateUndermine OF((z_streamp, int)); -ZEXTERN int ZEXPORT inflateResetKeep OF((z_streamp)); -ZEXTERN int ZEXPORT deflateResetKeep OF((z_streamp)); -#ifndef Z_SOLO - ZEXTERN unsigned long ZEXPORT gzflags OF((void)); -#endif - -#ifdef __cplusplus -} -#endif - -#endif /* ZLIB_H */ diff --git a/sdk-modifications/libsrc/zlib/zlib.mk b/sdk-modifications/libsrc/zlib/zlib.mk deleted file mode 100755 index 94ea103..0000000 --- a/sdk-modifications/libsrc/zlib/zlib.mk +++ /dev/null @@ -1,10 +0,0 @@ -# zlib.mk - -SRC += $(wildcard $(ZLIB_DIR)/*.c) - -SSRC += - -INC += -I$(ZLIB_DIR) - -CFLAGS += - diff --git a/sdk-modifications/libsrc/zlib/zutil.c b/sdk-modifications/libsrc/zlib/zutil.c deleted file mode 100755 index 8a1d242..0000000 --- a/sdk-modifications/libsrc/zlib/zutil.c +++ /dev/null @@ -1,301 +0,0 @@ -/* zutil.c -- target dependent utility functions for the compression library - * Copyright (C) 1995-2005, 2010, 2011 Jean-loup Gailly. - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* @(#) $Id$ */ - -#include "zutil.h" - -#ifndef NO_DUMMY_DECL -struct internal_state {int dummy;}; /* for buggy compilers */ -#endif - -const char * const z_errmsg[10] = { -"need dictionary", /* Z_NEED_DICT 2 */ -"stream end", /* Z_STREAM_END 1 */ -"", /* Z_OK 0 */ -"file error", /* Z_ERRNO (-1) */ -"stream error", /* Z_STREAM_ERROR (-2) */ -"data error", /* Z_DATA_ERROR (-3) */ -"insufficient memory", /* Z_MEM_ERROR (-4) */ -"buffer error", /* Z_BUF_ERROR (-5) */ -"incompatible version",/* Z_VERSION_ERROR (-6) */ -""}; - - -const char * ZEXPORT zlibVersion() -{ - return ZLIB_VERSION; -} - -uLong ZEXPORT zlibCompileFlags() -{ - uLong flags; - - flags = 0; - switch ((int)(sizeof(uInt))) { - case 2: break; - case 4: flags += 1; break; - case 8: flags += 2; break; - default: flags += 3; - } - switch ((int)(sizeof(uLong))) { - case 2: break; - case 4: flags += 1 << 2; break; - case 8: flags += 2 << 2; break; - default: flags += 3 << 2; - } - switch ((int)(sizeof(voidpf))) { - case 2: break; - case 4: flags += 1 << 4; break; - case 8: flags += 2 << 4; break; - default: flags += 3 << 4; - } - switch ((int)(sizeof(z_off_t))) { - case 2: break; - case 4: flags += 1 << 6; break; - case 8: flags += 2 << 6; break; - default: flags += 3 << 6; - } -#ifdef DEBUG - flags += 1 << 8; -#endif -#if defined(ASMV) || defined(ASMINF) - flags += 1 << 9; -#endif -#ifdef ZLIB_WINAPI - flags += 1 << 10; -#endif -#ifdef BUILDFIXED - flags += 1 << 12; -#endif -#ifdef DYNAMIC_CRC_TABLE - flags += 1 << 13; -#endif -#ifdef NO_GZCOMPRESS - flags += 1L << 16; -#endif -#ifdef NO_GZIP - flags += 1L << 17; -#endif -#ifdef PKZIP_BUG_WORKAROUND - flags += 1L << 20; -#endif -#ifdef FASTEST - flags += 1L << 21; -#endif -#ifdef Z_SOLO - return flags; -#else - return flags + gzflags(); -#endif -} - -#ifdef DEBUG - -# ifndef verbose -# define verbose 0 -# endif -int ZLIB_INTERNAL z_verbose = verbose; - -void ZLIB_INTERNAL z_error (m) - char *m; -{ - fprintf(stderr, "%s\n", m); - exit(1); -} -#endif - -/* exported to allow conversion of error code to string for compress() and - * uncompress() - */ -const char * ZEXPORT zError(err) - int err; -{ - return ERR_MSG(err); -} - -#if defined(_WIN32_WCE) - /* The Microsoft C Run-Time Library for Windows CE doesn't have - * errno. We define it as a global variable to simplify porting. - * Its value is always 0 and should not be used. - */ - int errno = 0; -#endif - -#ifndef HAVE_MEMCPY - -void ZLIB_INTERNAL zmemcpy(dest, source, len) - Bytef* dest; - const Bytef* source; - uInt len; -{ - if (len == 0) return; - do { - *dest++ = *source++; /* ??? to be unrolled */ - } while (--len != 0); -} - -int ZLIB_INTERNAL zmemcmp(s1, s2, len) - const Bytef* s1; - const Bytef* s2; - uInt len; -{ - uInt j; - - for (j = 0; j < len; j++) { - if (s1[j] != s2[j]) return 2*(s1[j] > s2[j])-1; - } - return 0; -} - -void ZLIB_INTERNAL zmemzero(dest, len) - Bytef* dest; - uInt len; -{ - if (len == 0) return; - do { - *dest++ = 0; /* ??? to be unrolled */ - } while (--len != 0); -} -#endif - -#ifndef Z_SOLO - -#ifdef SYS16BIT - -#ifdef __TURBOC__ -/* Turbo C in 16-bit mode */ - -# define MY_ZCALLOC - -/* Turbo C malloc() does not allow dynamic allocation of 64K bytes - * and farmalloc(64K) returns a pointer with an offset of 8, so we - * must fix the pointer. Warning: the pointer must be put back to its - * original form in order to free it, use zcfree(). - */ - -#define MAX_PTR 10 -/* 10*64K = 640K */ - -local int next_ptr = 0; - -typedef struct ptr_table_s { - voidpf org_ptr; - voidpf new_ptr; -} ptr_table; - -local ptr_table table[MAX_PTR]; -/* This table is used to remember the original form of pointers - * to large buffers (64K). Such pointers are normalized with a zero offset. - * Since MSDOS is not a preemptive multitasking OS, this table is not - * protected from concurrent access. This hack doesn't work anyway on - * a protected system like OS/2. Use Microsoft C instead. - */ - -voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, unsigned items, unsigned size) -{ - voidpf buf = opaque; /* just to make some compilers happy */ - ulg bsize = (ulg)items*size; - - /* If we allocate less than 65520 bytes, we assume that farmalloc - * will return a usable pointer which doesn't have to be normalized. - */ - if (bsize < 65520L) { - buf = farmalloc(bsize); - if (*(ush*)&buf != 0) return buf; - } else { - buf = farmalloc(bsize + 16L); - } - if (buf == NULL || next_ptr >= MAX_PTR) return NULL; - table[next_ptr].org_ptr = buf; - - /* Normalize the pointer to seg:0 */ - *((ush*)&buf+1) += ((ush)((uch*)buf-0) + 15) >> 4; - *(ush*)&buf = 0; - table[next_ptr++].new_ptr = buf; - return buf; -} - -void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr) -{ - int n; - if (*(ush*)&ptr != 0) { /* object < 64K */ - farfree(ptr); - return; - } - /* Find the original pointer */ - for (n = 0; n < next_ptr; n++) { - if (ptr != table[n].new_ptr) continue; - - farfree(table[n].org_ptr); - while (++n < next_ptr) { - table[n-1] = table[n]; - } - next_ptr--; - return; - } - ptr = opaque; /* just to make some compilers happy */ - Assert(0, "zcfree: ptr not found"); -} - -#endif /* __TURBOC__ */ - - -#ifdef M_I86 -/* Microsoft C in 16-bit mode */ - -# define MY_ZCALLOC - -#if (!defined(_MSC_VER) || (_MSC_VER <= 600)) -# define _halloc halloc -# define _hfree hfree -#endif - -voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, uInt items, uInt size) -{ - if (opaque) opaque = 0; /* to make compiler happy */ - return _halloc((long)items, size); -} - -void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr) -{ - if (opaque) opaque = 0; /* to make compiler happy */ - _hfree(ptr); -} - -#endif /* M_I86 */ - -#endif /* SYS16BIT */ - - -#ifndef MY_ZCALLOC /* Any system without a special alloc function */ - -#ifndef STDC -extern voidp malloc OF((uInt size)); -extern voidp calloc OF((uInt items, uInt size)); -extern void free OF((voidpf ptr)); -#endif - -voidpf ZLIB_INTERNAL zcalloc (opaque, items, size) - voidpf opaque; - unsigned items; - unsigned size; -{ - if (opaque) items += size - size; /* make compiler happy */ - return sizeof(uInt) > 2 ? (voidpf)malloc(items * size) : - (voidpf)calloc(items, size); -} - -void ZLIB_INTERNAL zcfree (opaque, ptr) - voidpf opaque; - voidpf ptr; -{ - free(ptr); - if (opaque) return; /* make compiler happy */ -} - -#endif /* MY_ZCALLOC */ - -#endif /* !Z_SOLO */ diff --git a/sdk-modifications/libsrc/zlib/zutil.h b/sdk-modifications/libsrc/zlib/zutil.h deleted file mode 100755 index d8575e0..0000000 --- a/sdk-modifications/libsrc/zlib/zutil.h +++ /dev/null @@ -1,254 +0,0 @@ -/* zutil.h -- internal interface and configuration of the compression library - * Copyright (C) 1995-2011 Jean-loup Gailly. - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -/* @(#) $Id$ */ - -#ifndef ZUTIL_H -#define ZUTIL_H - -#if ((__GNUC__-0) * 10 + __GNUC_MINOR__-0 >= 33) && !defined(NO_VIZ) -# define ZLIB_INTERNAL __attribute__((visibility ("hidden"))) -#else -# define ZLIB_INTERNAL -#endif - -#include "zlib.h" - -#include <ds2_malloc.h> -#include <fs_api.h> -#include <ds2_unistd.h> - -# include <stddef.h> - -#if defined(STDC) && !defined(Z_SOLO) -# if !(defined(_WIN32_WCE) && defined(_MSC_VER)) -//# include <stddef.h> -# endif -//# include <string.h> -//# include <stdlib.h> -#endif - -#ifdef Z_SOLO - typedef long ptrdiff_t; /* guess -- will be caught if guess is wrong */ -#endif - -#ifndef local -# define local static -#endif -/* compile with -Dlocal if your debugger can't find static symbols */ - -typedef unsigned char uch; -typedef uch FAR uchf; -typedef unsigned short ush; -typedef ush FAR ushf; -typedef unsigned long ulg; - -extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */ -/* (size given to avoid silly warnings with Visual C++) */ - -#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)] - -#define ERR_RETURN(strm,err) \ - return (strm->msg = (char*)ERR_MSG(err), (err)) -/* To be used only when the state is known to be valid */ - - /* common constants */ - -#ifndef DEF_WBITS -# define DEF_WBITS MAX_WBITS -#endif -/* default windowBits for decompression. MAX_WBITS is for compression only */ - -#if MAX_MEM_LEVEL >= 8 -# define DEF_MEM_LEVEL 8 -#else -# define DEF_MEM_LEVEL MAX_MEM_LEVEL -#endif -/* default memLevel */ - -#define STORED_BLOCK 0 -#define STATIC_TREES 1 -#define DYN_TREES 2 -/* The three kinds of block type */ - -#define MIN_MATCH 3 -#define MAX_MATCH 258 -/* The minimum and maximum match lengths */ - -#define PRESET_DICT 0x20 /* preset dictionary flag in zlib header */ - - /* target dependencies */ - -#if defined(MSDOS) || (defined(WINDOWS) && !defined(WIN32)) -# define OS_CODE 0x00 -# ifndef Z_SOLO -# if defined(__TURBOC__) || defined(__BORLANDC__) -# if (__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__)) - /* Allow compilation with ANSI keywords only enabled */ - void _Cdecl farfree( void *block ); - void *_Cdecl farmalloc( unsigned long nbytes ); -# else -# include <alloc.h> -# endif -# else /* MSC or DJGPP */ -# include <malloc.h> -# endif -# endif -#endif - -#ifdef AMIGA -# define OS_CODE 0x01 -#endif - -#if defined(VAXC) || defined(VMS) -# define OS_CODE 0x02 -# define F_OPEN(name, mode) \ - fopen((name), (mode), "mbc=60", "ctx=stm", "rfm=fix", "mrs=512") -#endif - -#if defined(ATARI) || defined(atarist) -# define OS_CODE 0x05 -#endif - -#ifdef OS2 -# define OS_CODE 0x06 -# if defined(M_I86) && !defined(Z_SOLO) -# include <malloc.h> -# endif -#endif - -#if defined(MACOS) || defined(TARGET_OS_MAC) -# define OS_CODE 0x07 -# ifndef Z_SOLO -# if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os -# include <unix.h> /* for fdopen */ -# else -# ifndef fdopen -# define fdopen(fd,mode) NULL /* No fdopen() */ -# endif -# endif -# endif -#endif - -#ifdef TOPS20 -# define OS_CODE 0x0a -#endif - -#ifdef WIN32 -# ifndef __CYGWIN__ /* Cygwin is Unix, not Win32 */ -# define OS_CODE 0x0b -# endif -#endif - -#ifdef __50SERIES /* Prime/PRIMOS */ -# define OS_CODE 0x0f -#endif - -#if defined(_BEOS_) || defined(RISCOS) -# define fdopen(fd,mode) NULL /* No fdopen() */ -#endif - -#if (defined(_MSC_VER) && (_MSC_VER > 600)) && !defined __INTERIX -# if defined(_WIN32_WCE) -# define fdopen(fd,mode) NULL /* No fdopen() */ -# ifndef _PTRDIFF_T_DEFINED - typedef int ptrdiff_t; -# define _PTRDIFF_T_DEFINED -# endif -# else -# define fdopen(fd,type) _fdopen(fd,type) -# endif -#endif - -#if defined(__BORLANDC__) && !defined(MSDOS) - #pragma warn -8004 - #pragma warn -8008 - #pragma warn -8066 -#endif - -/* provide prototypes for these when building zlib without LFS */ -#if !defined(_WIN32) && (!defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0) - ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t)); - ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t)); -#endif - - /* common defaults */ - -#ifndef OS_CODE -# define OS_CODE 0x03 /* assume Unix */ -#endif - -#ifndef F_OPEN -# define F_OPEN(name, mode) fopen((name), (mode)) -#endif - - /* functions */ - -#if defined(pyr) || defined(Z_SOLO) -# define NO_MEMCPY -#endif -#if defined(SMALL_MEDIUM) && !defined(_MSC_VER) && !defined(__SC__) - /* Use our own functions for small and medium model with MSC <= 5.0. - * You may have to use the same strategy for Borland C (untested). - * The __SC__ check is for Symantec. - */ -# define NO_MEMCPY -#endif -#if defined(STDC) && !defined(HAVE_MEMCPY) && !defined(NO_MEMCPY) -# define HAVE_MEMCPY -#endif -#ifdef HAVE_MEMCPY -# ifdef SMALL_MEDIUM /* MSDOS small or medium model */ -# define zmemcpy _fmemcpy -# define zmemcmp _fmemcmp -# define zmemzero(dest, len) _fmemset(dest, 0, len) -# else -# define zmemcpy memcpy -# define zmemcmp memcmp -# define zmemzero(dest, len) memset(dest, 0, len) -# endif -#else - void ZLIB_INTERNAL zmemcpy OF((Bytef* dest, const Bytef* source, uInt len)); - int ZLIB_INTERNAL zmemcmp OF((const Bytef* s1, const Bytef* s2, uInt len)); - void ZLIB_INTERNAL zmemzero OF((Bytef* dest, uInt len)); -#endif - -/* Diagnostic functions */ -#ifdef DEBUG -# include <stdio.h> - extern int ZLIB_INTERNAL z_verbose; - extern void ZLIB_INTERNAL z_error OF((char *m)); -# define Assert(cond,msg) {if(!(cond)) z_error(msg);} -# define Trace(x) {if (z_verbose>=0) fprintf x ;} -# define Tracev(x) {if (z_verbose>0) fprintf x ;} -# define Tracevv(x) {if (z_verbose>1) fprintf x ;} -# define Tracec(c,x) {if (z_verbose>0 && (c)) fprintf x ;} -# define Tracecv(c,x) {if (z_verbose>1 && (c)) fprintf x ;} -#else -# define Assert(cond,msg) -# define Trace(x) -# define Tracev(x) -# define Tracevv(x) -# define Tracec(c,x) -# define Tracecv(c,x) -#endif - -#ifndef Z_SOLO - voidpf ZLIB_INTERNAL zcalloc OF((voidpf opaque, unsigned items, - unsigned size)); - void ZLIB_INTERNAL zcfree OF((voidpf opaque, voidpf ptr)); -#endif - -#define ZALLOC(strm, items, size) \ - (*((strm)->zalloc))((strm)->opaque, (items), (size)) -#define ZFREE(strm, addr) (*((strm)->zfree))((strm)->opaque, (voidpf)(addr)) -#define TRY_FREE(s, p) {if (p) ZFREE(s, p);} - -#endif /* ZUTIL_H */ |