| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Run the opcode as a tail call from the address calculation. This cuts on the needed return instructions.
Pass the opcode address as a parameter; this keeps it in a register most of the time and avoids memory stores.
|
|
selection interface freezes when it gets to the folder containing Mightymo's cheat files, whereas it did not do this before with the converted Mightymo cheats. (335 files -> 679, though.)
|
|
lose keys entirely sometimes, and could otherwise delay a button press or release by 200 ms.
This was the entire reason I created the fork, and I finally did it! It syncs the controls every scanline of a frame, which costs about 60,000 MIPS instructions per frame to deal with. Luckily, the processor runs at 396 MHz, which means the cost of checking the controls is 1% of the CPU's power.
|
|
SNES Open Bus is a quirk of the memory subsystem that allow reads of invalid addresses to return the last byte read from memory. However, it is seldom needed by a game, and it costs 1 to 3 MIPS instructions per SNES instruction to emulate.
If you need SNES Open Bus, you can remove -DNO_OPEN_BUS from the Makefile.
|
|
|
|
Also raise the CPU's clock speed to 396 MHz by default, instead of 360 MHz, when emulating a ROM.
|
|
emulator.
|
|
With the MIPS instruction cache, this means that two consecutive SNES CPU instructions using e.g. the same addressing style or the same opcode have a chance that the second one will use the first one's code and that it will be cached.
|
|
|
|
|
|
make -jN.
|
|
|
