pcsxr-1.9.92

1 files changed, 285 insertions, 0 deletions

diff --git a/libpcsxcore/psemu_plugin_defs.h b/libpcsxcore/psemu_plugin_defs.h
new file mode 100644
index 0000000..d1b05ac
--- /dev/null
+++ b/libpcsxcore/psemu_plugin_defs.h
@@ -0,0 +1,285 @@
+#ifndef _PSEMU_PLUGIN_DEFS_H
+#define _PSEMU_PLUGIN_DEFS_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// header version
+#define _PPDK_HEADER_VERSION		3
+
+#define PLUGIN_VERSION				1
+
+// plugin type returned by PSEgetLibType (types can be merged if plugin is multi type!)
+#define PSE_LT_CDR					1
+#define PSE_LT_GPU					2
+#define PSE_LT_SPU					4
+#define PSE_LT_PAD					8
+#define PSE_LT_NET					16
+
+// DLL function return codes
+#define PSE_ERR_SUCCESS				0	// every function in DLL if completed sucessfully should return this value
+#define PSE_ERR_FATAL				-1	// undefined error but fatal one, that kills all functionality
+
+// XXX_Init return values
+// Those return values apply to all libraries
+// currently obsolete - preserved for compatibilty
+
+#define PSE_INIT_ERR_SUCCESS		0	// initialization went OK
+#define PSE_INIT_ERR_NOTCONFIGURED	-2	// this driver is not configured
+#define PSE_INIT_ERR_NOHARDWARE		-3	// this driver can not operate properly on this hardware or hardware is not detected
+
+/*         GPU PlugIn          */
+
+//  GPU_Test return values
+
+// sucess, everything configured, and went OK.
+#define PSE_GPU_ERR_SUCCESS			0
+
+// ERRORS
+// this error might be returned as critical error but none of below
+#define PSE_GPU_ERR					-20
+
+
+// this driver is not configured
+#define PSE_GPU_ERR_NOTCONFIGURED	PSE_GPU_ERR - 1
+// this driver failed Init
+#define PSE_GPU_ERR_INIT			PSE_GPU_ERR - 2
+
+// WARNINGS
+// this warning might be returned as undefined warning but allowing driver to continue
+#define PSE_GPU_WARN				20
+
+//  GPU_Query		- will be implemented soon
+
+typedef struct
+{
+	uint32_t	flags;
+	uint32_t	status;
+ 	void*	window;
+	unsigned char reserved[100];
+} gpuQueryS;
+
+// gpuQueryS.flags
+// if driver can operate in both modes it must support GPU_changeMode();
+#define PSE_GPU_FLAGS_FULLSCREEN		1	// this driver can operate in fullscreen mode
+#define PSE_GPU_FLAGS_WINDOWED			2	// this driver can operate in windowed mode
+
+// gpuQueryS.status
+#define PSE_GPU_STATUS_WINDOWWRONG	1	// this driver cannot operate in this windowed mode
+
+//  GPU_Query	End	- will be implemented in v2
+
+
+/*         CDR PlugIn          */
+
+//	CDR_Test return values
+
+// sucess, everything configured, and went OK.
+#define PSE_CDR_ERR_SUCCESS			0
+
+// general failure (error undefined)
+#define PSE_CDR_ERR_FAILURE			-1
+
+// ERRORS
+#define PSE_CDR_ERR -40
+// this driver is not configured
+#define PSE_CDR_ERR_NOTCONFIGURED	PSE_CDR_ERR - 0
+// if this driver is unable to read data from medium
+#define PSE_CDR_ERR_NOREAD			PSE_CDR_ERR - 1
+
+// WARNINGS
+#define PSE_CDR_WARN 40
+// if this driver emulates lame mode ie. can read only 2048 tracks and sector header is emulated
+// this might happen to CDROMS that do not support RAW mode reading - surelly it will kill many games
+#define PSE_CDR_WARN_LAMECD			PSE_CDR_WARN + 0
+
+
+
+
+/*         SPU PlugIn          */
+
+// some info retricted (now!)
+
+// sucess, everything configured, and went OK.
+#define PSE_SPU_ERR_SUCCESS 0
+
+// ERRORS
+// this error might be returned as critical error but none of below
+#define PSE_SPU_ERR					-60
+
+// this driver is not configured
+#define PSE_SPU_ERR_NOTCONFIGURED	PSE_SPU_ERR - 1
+// this driver failed Init
+#define PSE_SPU_ERR_INIT			PSE_SPU_ERR - 2
+
+
+// WARNINGS
+// this warning might be returned as undefined warning but allowing driver to continue
+#define PSE_SPU_WARN				60
+
+
+
+
+/*         PAD PlugIn          */
+
+/*
+
+  functions that must be exported from PAD Plugin
+
+  long	PADinit(long flags);	// called only once when PSEmu Starts
+  void	PADshutdown(void);		// called when PSEmu exits
+  long	PADopen(PadInitS *);	// called when PSEmu is running program
+  long	PADclose(void);
+  long	PADconfigure(void);
+  void  PADabout(void);
+  long  PADtest(void);			// called from Configure Dialog and after PADopen();
+  long	PADquery(void);
+
+  unsigned char PADstartPoll(int);
+  unsigned char PADpoll(unsigned char);
+
+*/
+
+// PADquery responses (notice - values ORed)
+// PSEmu will use them also in PADinit to tell Plugin which Ports will use
+// notice that PSEmu will call PADinit and PADopen only once when they are from
+// same plugin
+
+// might be used in port 1
+#define PSE_PAD_USE_PORT1			1
+// might be used in port 2
+#define PSE_PAD_USE_PORT2			2
+
+
+
+// MOUSE SCPH-1030
+#define PSE_PAD_TYPE_MOUSE			1
+// NEGCON - 16 button analog controller SLPH-00001
+#define PSE_PAD_TYPE_NEGCON			2
+// GUN CONTROLLER - gun controller SLPH-00014 from Konami
+#define PSE_PAD_TYPE_GUN			3
+// STANDARD PAD SCPH-1080, SCPH-1150
+#define PSE_PAD_TYPE_STANDARD		4
+// ANALOG JOYSTICK SCPH-1110
+#define PSE_PAD_TYPE_ANALOGJOY		5
+// GUNCON - gun controller SLPH-00034 from Namco
+#define PSE_PAD_TYPE_GUNCON			6
+// ANALOG CONTROLLER SCPH-1150
+#define PSE_PAD_TYPE_ANALOGPAD		7
+
+
+// sucess, everything configured, and went OK.
+#define PSE_PAD_ERR_SUCCESS			0
+// general plugin failure (undefined error)
+#define PSE_PAD_ERR_FAILURE			-1
+
+
+// ERRORS
+// this error might be returned as critical error but none of below
+#define PSE_PAD_ERR					-80
+// this driver is not configured
+#define PSE_PAD_ERR_NOTCONFIGURED	PSE_PAD_ERR - 1
+// this driver failed Init
+#define PSE_PAD_ERR_INIT			PSE_PAD_ERR - 2
+
+
+// WARNINGS
+// this warning might be returned as undefined warning but allowing driver to continue
+#define PSE_PAD_WARN				80
+
+
+typedef struct
+{
+	// controler type - fill it withe predefined values above
+	unsigned char controllerType;
+
+	// status of buttons - every controller fills this field
+	unsigned short buttonStatus;
+
+	// for analog pad fill those next 4 bytes
+	// values are analog in range 0-255 where 127 is center position
+	unsigned char rightJoyX, rightJoyY, leftJoyX, leftJoyY;
+
+	// for mouse fill those next 2 bytes
+	// values are in range -128 - 127
+	unsigned char moveX, moveY;
+
+	unsigned char reserved[91];
+
+} PadDataS;
+
+/*         NET PlugIn v2       */
+/* Added by linuzappz@pcsx.net */
+
+/* Modes bits for NETsendData/NETrecvData */
+#define PSE_NET_BLOCKING	0x00000000
+#define PSE_NET_NONBLOCKING	0x00000001
+
+/* note: unsupported fields should be zeroed.
+ 
+typedef struct {
+	char EmuName[32];
+	char CdromID[9];	// ie. 'SCPH12345', no \0 trailing character
+	char CdromLabel[11];
+	void *psxMem;
+	GPUshowScreenPic GPU_showScreenPic;
+	GPUdisplayText GPU_displayText;
+	PADsetSensitive PAD_setSensitive;
+	char GPUpath[256];
+	char SPUpath[256];
+	char CDRpath[256];
+	char MCD1path[256];
+	char MCD2path[256];
+	char BIOSpath[256];	// 'HLE' for internal bios
+	char Unused[1024];
+} netInfo;
+
+*/
+
+/*
+  basic funcs:
+
+   long NETopen(HWND hWnd)
+    opens the connection.
+    shall return 0 on success, else -1.
+    -1 is also returned if the user selects offline mode.
+
+   long NETclose()
+    closes the connection.
+    shall return 0 on success, else -1.
+
+   void NETpause()
+    this is called when the user paused the emulator.
+
+   void NETresume()
+    this is called when the user resumed the emulator.
+
+   long NETqueryPlayer()
+    returns player number
+
+   long NETsendPadData(void *pData, int Size)
+    this should be called for the first pad only on each side.
+
+   long NETrecvPadData(void *pData, int Pad)
+    call this for Pad 1/2 to get the data sent by the above func.
+
+  extended funcs:
+
+   long NETsendData(void *pData, int Size, int Mode)
+    sends Size bytes from pData to the other side.
+
+   long NETrecvData(void *pData, int Size, int Mode)
+    receives Size bytes from pData to the other side.
+
+   void NETsetInfo(netInfo *info);
+    sets the netInfo struct.
+
+   void NETkeypressed(int key) (linux only)
+    key is a XK_?? (X11) keycode.
+*/
+
+#ifdef __cplusplus
+}
+#endif
+#endif // _PSEMU_PLUGIN_DEFS_H