aboutsummaryrefslogtreecommitdiff
path: root/libretro.h
diff options
context:
space:
mode:
Diffstat (limited to 'libretro.h')
-rw-r--r--libretro.h1526
1 files changed, 864 insertions, 662 deletions
diff --git a/libretro.h b/libretro.h
index dd76b0f..469b86a 100644
--- a/libretro.h
+++ b/libretro.h
@@ -23,7 +23,41 @@ extern "C" {
#endif
#endif
-/* Used for checking API/ABI mismatches that can break libretro
+#ifndef RETRO_CALLCONV
+# if defined(__GNUC__) && defined(__i386__) && !defined(__x86_64__)
+# define RETRO_CALLCONV __attribute__((cdecl))
+# elif defined(_MSC_VER) && defined(_M_X86) && !defined(_M_X64)
+# define RETRO_CALLCONV __cdecl
+# else
+# define RETRO_CALLCONV /* all other platforms only have one calling convention each */
+# endif
+#endif
+
+#ifndef RETRO_API
+# if defined(_WIN32) || defined(__CYGWIN__) || defined(__MINGW32__)
+# ifdef RETRO_IMPORT_SYMBOLS
+# ifdef __GNUC__
+# define RETRO_API RETRO_CALLCONV __attribute__((__dllimport__))
+# else
+# define RETRO_API RETRO_CALLCONV __declspec(dllimport)
+# endif
+# else
+# ifdef __GNUC__
+# define RETRO_API RETRO_CALLCONV __attribute__((__dllexport__))
+# else
+# define RETRO_API RETRO_CALLCONV __declspec(dllexport)
+# endif
+# endif
+# else
+# if defined(__GNUC__) && __GNUC__ >= 4 && !defined(__CELLOS_LV2__)
+# define RETRO_API RETRO_CALLCONV __attribute__((__visibility__("default")))
+# else
+# define RETRO_API RETRO_CALLCONV
+# endif
+# endif
+#endif
+
+/* Used for checking API/ABI mismatches that can break libretro
* implementations.
* It is not incremented for compatible changes to the API.
*/
@@ -33,13 +67,13 @@ extern "C" {
* Libretro's fundamental device abstractions.
*
* Libretro's input system consists of some standardized device types,
- * such as a joypad (with/without analog), mouse, keyboard, lightgun
+ * such as a joypad (with/without analog), mouse, keyboard, lightgun
* and a pointer.
*
- * The functionality of these devices are fixed, and individual cores
+ * The functionality of these devices are fixed, and individual cores
* map their own concept of a controller to libretro's abstractions.
- * This makes it possible for frontends to map the abstract types to a
- * real input device, and not having to worry about binding input
+ * This makes it possible for frontends to map the abstract types to a
+ * real input device, and not having to worry about binding input
* correctly to arbitrary controller layouts.
*/
@@ -50,22 +84,22 @@ extern "C" {
/* Input disabled. */
#define RETRO_DEVICE_NONE 0
-/* The JOYPAD is called RetroPad. It is essentially a Super Nintendo
- * controller, but with additional L2/R2/L3/R3 buttons, similar to a
+/* The JOYPAD is called RetroPad. It is essentially a Super Nintendo
+ * controller, but with additional L2/R2/L3/R3 buttons, similar to a
* PS1 DualShock. */
#define RETRO_DEVICE_JOYPAD 1
/* The mouse is a simple mouse, similar to Super Nintendo's mouse.
* X and Y coordinates are reported relatively to last poll (poll callback).
- * It is up to the libretro implementation to keep track of where the mouse
+ * It is up to the libretro implementation to keep track of where the mouse
* pointer is supposed to be on the screen.
- * The frontend must make sure not to interfere with its own hardware
+ * The frontend must make sure not to interfere with its own hardware
* mouse pointer.
*/
#define RETRO_DEVICE_MOUSE 2
/* KEYBOARD device lets one poll for raw key pressed.
- * It is poll based, so input callback will return with the current
+ * It is poll based, so input callback will return with the current
* pressed state.
* For event/text based keyboard input, see
* RETRO_ENVIRONMENT_SET_KEYBOARD_CALLBACK.
@@ -78,7 +112,7 @@ extern "C" {
/* The ANALOG device is an extension to JOYPAD (RetroPad).
* Similar to DualShock it adds two analog sticks.
- * This is treated as a separate device type as it returns values in the
+ * This is treated as a separate device type as it returns values in the
* full analog range of [-0x8000, 0x7fff]. Positive X axis is right.
* Positive Y axis is down.
* Only use ANALOG type when polling for analog values of the axes.
@@ -86,7 +120,7 @@ extern "C" {
#define RETRO_DEVICE_ANALOG 5
/* Abstracts the concept of a pointing mechanism, e.g. touch.
- * This allows libretro to query in absolute coordinates where on the
+ * This allows libretro to query in absolute coordinates where on the
* screen a mouse (or something similar) is being placed.
* For a touch centric device, coordinates reported are the coordinates
* of the press.
@@ -94,31 +128,31 @@ extern "C" {
* Coordinates in X and Y are reported as:
* [-0x7fff, 0x7fff]: -0x7fff corresponds to the far left/top of the screen,
* and 0x7fff corresponds to the far right/bottom of the screen.
- * The "screen" is here defined as area that is passed to the frontend and
+ * The "screen" is here defined as area that is passed to the frontend and
* later displayed on the monitor.
*
* The frontend is free to scale/resize this screen as it sees fit, however,
- * (X, Y) = (-0x7fff, -0x7fff) will correspond to the top-left pixel of the
+ * (X, Y) = (-0x7fff, -0x7fff) will correspond to the top-left pixel of the
* game image, etc.
*
- * To check if the pointer coordinates are valid (e.g. a touch display
+ * To check if the pointer coordinates are valid (e.g. a touch display
* actually being touched), PRESSED returns 1 or 0.
*
- * If using a mouse on a desktop, PRESSED will usually correspond to the
+ * If using a mouse on a desktop, PRESSED will usually correspond to the
* left mouse button, but this is a frontend decision.
* PRESSED will only return 1 if the pointer is inside the game screen.
*
- * For multi-touch, the index variable can be used to successively query
+ * For multi-touch, the index variable can be used to successively query
* more presses.
* If index = 0 returns true for _PRESSED, coordinates can be extracted
- * with _X, _Y for index = 0. One can then query _PRESSED, _X, _Y with
+ * with _X, _Y for index = 0. One can then query _PRESSED, _X, _Y with
* index = 1, and so on.
- * Eventually _PRESSED will return false for an index. No further presses
+ * Eventually _PRESSED will return false for an index. No further presses
* are registered at this point. */
#define RETRO_DEVICE_POINTER 6
/* Buttons for the RetroPad (JOYPAD).
- * The placement of these is equivalent to placements on the
+ * The placement of these is equivalent to placements on the
* Super Nintendo controller.
* L2/R2/L3/R3 buttons correspond to the PS1 DualShock. */
#define RETRO_DEVICE_ID_JOYPAD_B 0
@@ -145,13 +179,15 @@ extern "C" {
#define RETRO_DEVICE_ID_ANALOG_Y 1
/* Id values for MOUSE. */
-#define RETRO_DEVICE_ID_MOUSE_X 0
-#define RETRO_DEVICE_ID_MOUSE_Y 1
-#define RETRO_DEVICE_ID_MOUSE_LEFT 2
-#define RETRO_DEVICE_ID_MOUSE_RIGHT 3
-#define RETRO_DEVICE_ID_MOUSE_WHEELUP 4
-#define RETRO_DEVICE_ID_MOUSE_WHEELDOWN 5
-#define RETRO_DEVICE_ID_MOUSE_MIDDLE 6
+#define RETRO_DEVICE_ID_MOUSE_X 0
+#define RETRO_DEVICE_ID_MOUSE_Y 1
+#define RETRO_DEVICE_ID_MOUSE_LEFT 2
+#define RETRO_DEVICE_ID_MOUSE_RIGHT 3
+#define RETRO_DEVICE_ID_MOUSE_WHEELUP 4
+#define RETRO_DEVICE_ID_MOUSE_WHEELDOWN 5
+#define RETRO_DEVICE_ID_MOUSE_MIDDLE 6
+#define RETRO_DEVICE_ID_MOUSE_HORIZ_WHEELUP 7
+#define RETRO_DEVICE_ID_MOUSE_HORIZ_WHEELDOWN 8
/* Id values for LIGHTGUN types. */
#define RETRO_DEVICE_ID_LIGHTGUN_X 0
@@ -186,14 +222,16 @@ enum retro_language
RETRO_LANGUAGE_KOREAN = 9,
RETRO_LANGUAGE_CHINESE_TRADITIONAL = 10,
RETRO_LANGUAGE_CHINESE_SIMPLIFIED = 11,
+ RETRO_LANGUAGE_ESPERANTO = 12,
+ RETRO_LANGUAGE_POLISH = 13,
RETRO_LANGUAGE_LAST,
/* Ensure sizeof(enum) == sizeof(int) */
- RETRO_LANGUAGE_DUMMY = INT_MAX
+ RETRO_LANGUAGE_DUMMY = INT_MAX
};
/* Passed to retro_get_memory_data/size().
- * If the memory type doesn't apply to the
+ * If the memory type doesn't apply to the
* implementation NULL/0 can be returned.
*/
#define RETRO_MEMORY_MASK 0xff
@@ -383,7 +421,7 @@ enum retro_mod
RETROKMOD_DUMMY = INT_MAX /* Ensure sizeof(enum) == sizeof(int) */
};
-/* If set, this call is not part of the public libretro API yet. It can
+/* If set, this call is not part of the public libretro API yet. It can
* change or be removed at any time. */
#define RETRO_ENVIRONMENT_EXPERIMENTAL 0x10000
/* Environment callback to be used internally in frontend. */
@@ -393,11 +431,11 @@ enum retro_mod
#define RETRO_ENVIRONMENT_SET_ROTATION 1 /* const unsigned * --
* Sets screen rotation of graphics.
* Is only implemented if rotation can be accelerated by hardware.
- * Valid values are 0, 1, 2, 3, which rotates screen by 0, 90, 180,
+ * Valid values are 0, 1, 2, 3, which rotates screen by 0, 90, 180,
* 270 degrees counter-clockwise respectively.
*/
#define RETRO_ENVIRONMENT_GET_OVERSCAN 2 /* bool * --
- * Boolean value whether or not the implementation should use overscan,
+ * Boolean value whether or not the implementation should use overscan,
* or crop away overscan.
*/
#define RETRO_ENVIRONMENT_GET_CAN_DUPE 3 /* bool * --
@@ -405,15 +443,15 @@ enum retro_mod
* passing NULL to video frame callback.
*/
-/* Environ 4, 5 are no longer supported (GET_VARIABLE / SET_VARIABLES),
- * and reserved to avoid possible ABI clash.
- */
+ /* Environ 4, 5 are no longer supported (GET_VARIABLE / SET_VARIABLES),
+ * and reserved to avoid possible ABI clash.
+ */
#define RETRO_ENVIRONMENT_SET_MESSAGE 6 /* const struct retro_message * --
- * Sets a message to be displayed in implementation-specific manner
+ * Sets a message to be displayed in implementation-specific manner
* for a certain amount of 'frames'.
- * Should not be used for trivial messages, which should simply be
- * logged via RETRO_ENVIRONMENT_GET_LOG_INTERFACE (or as a
+ * Should not be used for trivial messages, which should simply be
+ * logged via RETRO_ENVIRONMENT_GET_LOG_INTERFACE (or as a
* fallback, stderr).
*/
#define RETRO_ENVIRONMENT_SHUTDOWN 7 /* N/A (NULL) --
@@ -422,415 +460,501 @@ enum retro_mod
* way to shutdown the game from a menu item or similar.
*/
#define RETRO_ENVIRONMENT_SET_PERFORMANCE_LEVEL 8
-/* const unsigned * --
- * Gives a hint to the frontend how demanding this implementation
- * is on a system. E.g. reporting a level of 2 means
- * this implementation should run decently on all frontends
- * of level 2 and up.
- *
- * It can be used by the frontend to potentially warn
- * about too demanding implementations.
- *
- * The levels are "floating".
- *
- * This function can be called on a per-game basis,
- * as certain games an implementation can play might be
- * particularly demanding.
- * If called, it should be called in retro_load_game().
- */
+ /* const unsigned * --
+ * Gives a hint to the frontend how demanding this implementation
+ * is on a system. E.g. reporting a level of 2 means
+ * this implementation should run decently on all frontends
+ * of level 2 and up.
+ *
+ * It can be used by the frontend to potentially warn
+ * about too demanding implementations.
+ *
+ * The levels are "floating".
+ *
+ * This function can be called on a per-game basis,
+ * as certain games an implementation can play might be
+ * particularly demanding.
+ * If called, it should be called in retro_load_game().
+ */
#define RETRO_ENVIRONMENT_GET_SYSTEM_DIRECTORY 9
-/* const char ** --
- * Returns the "system" directory of the frontend.
- * This directory can be used to store system specific
- * content such as BIOSes, configuration data, etc.
- * The returned value can be NULL.
- * If so, no such directory is defined,
- * and it's up to the implementation to find a suitable directory.
- *
- * NOTE: Some cores used this folder also for "save" data such as
- * memory cards, etc, for lack of a better place to put it.
- * This is now discouraged, and if possible, cores should try to
- * use the new GET_SAVE_DIRECTORY.
- */
+ /* const char ** --
+ * Returns the "system" directory of the frontend.
+ * This directory can be used to store system specific
+ * content such as BIOSes, configuration data, etc.
+ * The returned value can be NULL.
+ * If so, no such directory is defined,
+ * and it's up to the implementation to find a suitable directory.
+ *
+ * NOTE: Some cores used this folder also for "save" data such as
+ * memory cards, etc, for lack of a better place to put it.
+ * This is now discouraged, and if possible, cores should try to
+ * use the new GET_SAVE_DIRECTORY.
+ */
#define RETRO_ENVIRONMENT_SET_PIXEL_FORMAT 10
-/* const enum retro_pixel_format * --
- * Sets the internal pixel format used by the implementation.
- * The default pixel format is RETRO_PIXEL_FORMAT_0RGB1555.
- * This pixel format however, is deprecated (see enum retro_pixel_format).
- * If the call returns false, the frontend does not support this pixel
- * format.
- *
- * This function should be called inside retro_load_game() or
- * retro_get_system_av_info().
- */
+ /* const enum retro_pixel_format * --
+ * Sets the internal pixel format used by the implementation.
+ * The default pixel format is RETRO_PIXEL_FORMAT_0RGB1555.
+ * This pixel format however, is deprecated (see enum retro_pixel_format).
+ * If the call returns false, the frontend does not support this pixel
+ * format.
+ *
+ * This function should be called inside retro_load_game() or
+ * retro_get_system_av_info().
+ */
#define RETRO_ENVIRONMENT_SET_INPUT_DESCRIPTORS 11
-/* const struct retro_input_descriptor * --
- * Sets an array of retro_input_descriptors.
- * It is up to the frontend to present this in a usable way.
- * The array is terminated by retro_input_descriptor::description
- * being set to NULL.
- * This function can be called at any time, but it is recommended
- * to call it as early as possible.
- */
+ /* const struct retro_input_descriptor * --
+ * Sets an array of retro_input_descriptors.
+ * It is up to the frontend to present this in a usable way.
+ * The array is terminated by retro_input_descriptor::description
+ * being set to NULL.
+ * This function can be called at any time, but it is recommended
+ * to call it as early as possible.
+ */
#define RETRO_ENVIRONMENT_SET_KEYBOARD_CALLBACK 12
-/* const struct retro_keyboard_callback * --
- * Sets a callback function used to notify core about keyboard events.
- */
+ /* const struct retro_keyboard_callback * --
+ * Sets a callback function used to notify core about keyboard events.
+ */
#define RETRO_ENVIRONMENT_SET_DISK_CONTROL_INTERFACE 13
-/* const struct retro_disk_control_callback * --
- * Sets an interface which frontend can use to eject and insert
- * disk images.
- * This is used for games which consist of multiple images and
- * must be manually swapped out by the user (e.g. PSX).
- */
+ /* const struct retro_disk_control_callback * --
+ * Sets an interface which frontend can use to eject and insert
+ * disk images.
+ * This is used for games which consist of multiple images and
+ * must be manually swapped out by the user (e.g. PSX).
+ */
#define RETRO_ENVIRONMENT_SET_HW_RENDER 14
-/* struct retro_hw_render_callback * --
- * Sets an interface to let a libretro core render with
- * hardware acceleration.
- * Should be called in retro_load_game().
- * If successful, libretro cores will be able to render to a
- * frontend-provided framebuffer.
- * The size of this framebuffer will be at least as large as
- * max_width/max_height provided in get_av_info().
- * If HW rendering is used, pass only RETRO_HW_FRAME_BUFFER_VALID or
- * NULL to retro_video_refresh_t.
- */
+ /* struct retro_hw_render_callback * --
+ * Sets an interface to let a libretro core render with
+ * hardware acceleration.
+ * Should be called in retro_load_game().
+ * If successful, libretro cores will be able to render to a
+ * frontend-provided framebuffer.
+ * The size of this framebuffer will be at least as large as
+ * max_width/max_height provided in get_av_info().
+ * If HW rendering is used, pass only RETRO_HW_FRAME_BUFFER_VALID or
+ * NULL to retro_video_refresh_t.
+ */
#define RETRO_ENVIRONMENT_GET_VARIABLE 15
-/* struct retro_variable * --
- * Interface to acquire user-defined information from environment
- * that cannot feasibly be supported in a multi-system way.
- * 'key' should be set to a key which has already been set by
- * SET_VARIABLES.
- * 'data' will be set to a value or NULL.
- */
+ /* struct retro_variable * --
+ * Interface to acquire user-defined information from environment
+ * that cannot feasibly be supported in a multi-system way.
+ * 'key' should be set to a key which has already been set by
+ * SET_VARIABLES.
+ * 'data' will be set to a value or NULL.
+ */
#define RETRO_ENVIRONMENT_SET_VARIABLES 16
-/* const struct retro_variable * --
- * Allows an implementation to signal the environment
- * which variables it might want to check for later using
- * GET_VARIABLE.
- * This allows the frontend to present these variables to
- * a user dynamically.
- * This should be called as early as possible (ideally in
- * retro_set_environment).
- *
- * 'data' points to an array of retro_variable structs
- * terminated by a { NULL, NULL } element.
- * retro_variable::key should be namespaced to not collide
- * with other implementations' keys. E.g. A core called
- * 'foo' should use keys named as 'foo_option'.
- * retro_variable::value should contain a human readable
- * description of the key as well as a '|' delimited list
- * of expected values.
- *
- * The number of possible options should be very limited,
- * i.e. it should be feasible to cycle through options
- * without a keyboard.
- *
- * First entry should be treated as a default.
- *
- * Example entry:
- * { "foo_option", "Speed hack coprocessor X; false|true" }
- *
- * Text before first ';' is description. This ';' must be
- * followed by a space, and followed by a list of possible
- * values split up with '|'.
- *
- * Only strings are operated on. The possible values will
- * generally be displayed and stored as-is by the frontend.
- */
+ /* const struct retro_variable * --
+ * Allows an implementation to signal the environment
+ * which variables it might want to check for later using
+ * GET_VARIABLE.
+ * This allows the frontend to present these variables to
+ * a user dynamically.
+ * This should be called as early as possible (ideally in
+ * retro_set_environment).
+ *
+ * 'data' points to an array of retro_variable structs
+ * terminated by a { NULL, NULL } element.
+ * retro_variable::key should be namespaced to not collide
+ * with other implementations' keys. E.g. A core called
+ * 'foo' should use keys named as 'foo_option'.
+ * retro_variable::value should contain a human readable
+ * description of the key as well as a '|' delimited list
+ * of expected values.
+ *
+ * The number of possible options should be very limited,
+ * i.e. it should be feasible to cycle through options
+ * without a keyboard.
+ *
+ * First entry should be treated as a default.
+ *
+ * Example entry:
+ * { "foo_option", "Speed hack coprocessor X; false|true" }
+ *
+ * Text before first ';' is description. This ';' must be
+ * followed by a space, and followed by a list of possible
+ * values split up with '|'.
+ *
+ * Only strings are operated on. The possible values will
+ * generally be displayed and stored as-is by the frontend.
+ */
#define RETRO_ENVIRONMENT_GET_VARIABLE_UPDATE 17
-/* bool * --
- * Result is set to true if some variables are updated by
- * frontend since last call to RETRO_ENVIRONMENT_GET_VARIABLE.
- * Variables should be queried with GET_VARIABLE.
- */
+ /* bool * --
+ * Result is set to true if some variables are updated by
+ * frontend since last call to RETRO_ENVIRONMENT_GET_VARIABLE.
+ * Variables should be queried with GET_VARIABLE.
+ */
#define RETRO_ENVIRONMENT_SET_SUPPORT_NO_GAME 18
-/* const bool * --
- * If true, the libretro implementation supports calls to
- * retro_load_game() with NULL as argument.
- * Used by cores which can run without particular game data.
- * This should be called within retro_set_environment() only.
- */
+ /* const bool * --
+ * If true, the libretro implementation supports calls to
+ * retro_load_game() with NULL as argument.
+ * Used by cores which can run without particular game data.
+ * This should be called within retro_set_environment() only.
+ */
#define RETRO_ENVIRONMENT_GET_LIBRETRO_PATH 19
-/* const char ** --
- * Retrieves the absolute path from where this libretro
- * implementation was loaded.
- * NULL is returned if the libretro was loaded statically
- * (i.e. linked statically to frontend), or if the path cannot be
- * determined.
- * Mostly useful in cooperation with SET_SUPPORT_NO_GAME as assets can
- * be loaded without ugly hacks.
- */
-
-/* Environment 20 was an obsolete version of SET_AUDIO_CALLBACK.
- * It was not used by any known core at the time,
- * and was removed from the API. */
+ /* const char ** --
+ * Retrieves the absolute path from where this libretro
+ * implementation was loaded.
+ * NULL is returned if the libretro was loaded statically
+ * (i.e. linked statically to frontend), or if the path cannot be
+ * determined.
+ * Mostly useful in cooperation with SET_SUPPORT_NO_GAME as assets can
+ * be loaded without ugly hacks.
+ */
+
+ /* Environment 20 was an obsolete version of SET_AUDIO_CALLBACK.
+ * It was not used by any known core at the time,
+ * and was removed from the API. */
#define RETRO_ENVIRONMENT_SET_AUDIO_CALLBACK 22
-/* const struct retro_audio_callback * --
- * Sets an interface which is used to notify a libretro core about audio
- * being available for writing.
- * The callback can be called from any thread, so a core using this must
- * have a thread safe audio implementation.
- * It is intended for games where audio and video are completely
- * asynchronous and audio can be generated on the fly.
- * This interface is not recommended for use with emulators which have
- * highly synchronous audio.
- *
- * The callback only notifies about writability; the libretro core still
- * has to call the normal audio callbacks
- * to write audio. The audio callbacks must be called from within the
- * notification callback.
- * The amount of audio data to write is up to the implementation.
- * Generally, the audio callback will be called continously in a loop.
- *
- * Due to thread safety guarantees and lack of sync between audio and
- * video, a frontend can selectively disallow this interface based on
- * internal configuration. A core using this interface must also
- * implement the "normal" audio interface.
- *
- * A libretro core using SET_AUDIO_CALLBACK should also make use of
- * SET_FRAME_TIME_CALLBACK.
- */
+ /* const struct retro_audio_callback * --
+ * Sets an interface which is used to notify a libretro core about audio
+ * being available for writing.
+ * The callback can be called from any thread, so a core using this must
+ * have a thread safe audio implementation.
+ * It is intended for games where audio and video are completely
+ * asynchronous and audio can be generated on the fly.
+ * This interface is not recommended for use with emulators which have
+ * highly synchronous audio.
+ *
+ * The callback only notifies about writability; the libretro core still
+ * has to call the normal audio callbacks
+ * to write audio. The audio callbacks must be called from within the
+ * notification callback.
+ * The amount of audio data to write is up to the implementation.
+ * Generally, the audio callback will be called continously in a loop.
+ *
+ * Due to thread safety guarantees and lack of sync between audio and
+ * video, a frontend can selectively disallow this interface based on
+ * internal configuration. A core using this interface must also
+ * implement the "normal" audio interface.
+ *
+ * A libretro core using SET_AUDIO_CALLBACK should also make use of
+ * SET_FRAME_TIME_CALLBACK.
+ */
#define RETRO_ENVIRONMENT_SET_FRAME_TIME_CALLBACK 21
-/* const struct retro_frame_time_callback * --
- * Lets the core know how much time has passed since last
- * invocation of retro_run().
- * The frontend can tamper with the timing to fake fast-forward,
- * slow-motion, frame stepping, etc.
- * In this case the delta time will use the reference value
- * in frame_time_callback..
- */
+ /* const struct retro_frame_time_callback * --
+ * Lets the core know how much time has passed since last
+ * invocation of retro_run().
+ * The frontend can tamper with the timing to fake fast-forward,
+ * slow-motion, frame stepping, etc.
+ * In this case the delta time will use the reference value
+ * in frame_time_callback..
+ */
#define RETRO_ENVIRONMENT_GET_RUMBLE_INTERFACE 23
-/* struct retro_rumble_interface * --
- * Gets an interface which is used by a libretro core to set
- * state of rumble motors in controllers.
- * A strong and weak motor is supported, and they can be
- * controlled indepedently.
- */
+ /* struct retro_rumble_interface * --
+ * Gets an interface which is used by a libretro core to set
+ * state of rumble motors in controllers.
+ * A strong and weak motor is supported, and they can be
+ * controlled indepedently.
+ */
#define RETRO_ENVIRONMENT_GET_INPUT_DEVICE_CAPABILITIES 24
-/* uint64_t * --
- * Gets a bitmask telling which device type are expected to be
- * handled properly in a call to retro_input_state_t.
- * Devices which are not handled or recognized always return
- * 0 in retro_input_state_t.
- * Example bitmask: caps = (1 << RETRO_DEVICE_JOYPAD) | (1 << RETRO_DEVICE_ANALOG).
- * Should only be called in retro_run().
- */
+ /* uint64_t * --
+ * Gets a bitmask telling which device type are expected to be
+ * handled properly in a call to retro_input_state_t.
+ * Devices which are not handled or recognized always return
+ * 0 in retro_input_state_t.
+ * Example bitmask: caps = (1 << RETRO_DEVICE_JOYPAD) | (1 << RETRO_DEVICE_ANALOG).
+ * Should only be called in retro_run().
+ */
#define RETRO_ENVIRONMENT_GET_SENSOR_INTERFACE (25 | RETRO_ENVIRONMENT_EXPERIMENTAL)
-/* struct retro_sensor_interface * --
- * Gets access to the sensor interface.
- * The purpose of this interface is to allow
- * setting state related to sensors such as polling rate,
- * enabling/disable it entirely, etc.
- * Reading sensor state is done via the normal
- * input_state_callback API.
- */
+ /* struct retro_sensor_interface * --
+ * Gets access to the sensor interface.
+ * The purpose of this interface is to allow
+ * setting state related to sensors such as polling rate,
+ * enabling/disable it entirely, etc.
+ * Reading sensor state is done via the normal
+ * input_state_callback API.
+ */
#define RETRO_ENVIRONMENT_GET_CAMERA_INTERFACE (26 | RETRO_ENVIRONMENT_EXPERIMENTAL)
-/* struct retro_camera_callback * --
- * Gets an interface to a video camera driver.
- * A libretro core can use this interface to get access to a
- * video camera.
- * New video frames are delivered in a callback in same
- * thread as retro_run().
- *
- * GET_CAMERA_INTERFACE should be called in retro_load_game().
- *
- * Depending on the camera implementation used, camera frames
- * will be delivered as a raw framebuffer,
- * or as an OpenGL texture directly.
- *
- * The core has to tell the frontend here which types of
- * buffers can be handled properly.
- * An OpenGL texture can only be handled when using a
- * libretro GL core (SET_HW_RENDER).
- * It is recommended to use a libretro GL core when
- * using camera interface.
- *
- * The camera is not started automatically. The retrieved start/stop
- * functions must be used to explicitly
- * start and stop the camera driver.
- */
+ /* struct retro_camera_callback * --
+ * Gets an interface to a video camera driver.
+ * A libretro core can use this interface to get access to a
+ * video camera.
+ * New video frames are delivered in a callback in same
+ * thread as retro_run().
+ *
+ * GET_CAMERA_INTERFACE should be called in retro_load_game().
+ *
+ * Depending on the camera implementation used, camera frames
+ * will be delivered as a raw framebuffer,
+ * or as an OpenGL texture directly.
+ *
+ * The core has to tell the frontend here which types of
+ * buffers can be handled properly.
+ * An OpenGL texture can only be handled when using a
+ * libretro GL core (SET_HW_RENDER).
+ * It is recommended to use a libretro GL core when
+ * using camera interface.
+ *
+ * The camera is not started automatically. The retrieved start/stop
+ * functions must be used to explicitly
+ * start and stop the camera driver.
+ */
#define RETRO_ENVIRONMENT_GET_LOG_INTERFACE 27
-/* struct retro_log_callback * --
- * Gets an interface for logging. This is useful for
- * logging in a cross-platform way
- * as certain platforms cannot use use stderr for logging.
- * It also allows the frontend to
- * show logging information in a more suitable way.
- * If this interface is not used, libretro cores should
- * log to stderr as desired.
- */
+ /* struct retro_log_callback * --
+ * Gets an interface for logging. This is useful for
+ * logging in a cross-platform way
+ * as certain platforms cannot use use stderr for logging.
+ * It also allows the frontend to
+ * show logging information in a more suitable way.
+ * If this interface is not used, libretro cores should
+ * log to stderr as desired.
+ */
#define RETRO_ENVIRONMENT_GET_PERF_INTERFACE 28
-/* struct retro_perf_callback * --
- * Gets an interface for performance counters. This is useful
- * for performance logging in a cross-platform way and for detecting
- * architecture-specific features, such as SIMD support.
- */
+ /* struct retro_perf_callback * --
+ * Gets an interface for performance counters. This is useful
+ * for performance logging in a cross-platform way and for detecting
+ * architecture-specific features, such as SIMD support.
+ */
#define RETRO_ENVIRONMENT_GET_LOCATION_INTERFACE 29
-/* struct retro_location_callback * --
- * Gets access to the location interface.
- * The purpose of this interface is to be able to retrieve
- * location-based information from the host device,
- * such as current latitude / longitude.
- */
-#define RETRO_ENVIRONMENT_GET_CONTENT_DIRECTORY 30
-/* const char ** --
- * Returns the "content" directory of the frontend.
- * This directory can be used to store specific assets that the
- * core relies upon, such as art assets,
- * input data, etc etc.
- * The returned value can be NULL.
- * If so, no such directory is defined,
- * and it's up to the implementation to find a suitable directory.
- */
+ /* struct retro_location_callback * --
+ * Gets access to the location interface.
+ * The purpose of this interface is to be able to retrieve
+ * location-based information from the host device,
+ * such as current latitude / longitude.
+ */
+#define RETRO_ENVIRONMENT_GET_CONTENT_DIRECTORY 30 /* Old name, kept for compatibility. */
+#define RETRO_ENVIRONMENT_GET_CORE_ASSETS_DIRECTORY 30
+ /* const char ** --
+ * Returns the "core assets" directory of the frontend.
+ * This directory can be used to store specific assets that the
+ * core relies upon, such as art assets,
+ * input data, etc etc.
+ * The returned value can be NULL.
+ * If so, no such directory is defined,
+ * and it's up to the implementation to find a suitable directory.
+ */
#define RETRO_ENVIRONMENT_GET_SAVE_DIRECTORY 31
-/* const char ** --
- * Returns the "save" directory of the frontend.
- * This directory can be used to store SRAM, memory cards,
- * high scores, etc, if the libretro core
- * cannot use the regular memory interface (retro_get_memory_data()).
- *
- * NOTE: libretro cores used to check GET_SYSTEM_DIRECTORY for
- * similar things before.
- * They should still check GET_SYSTEM_DIRECTORY if they want to
- * be backwards compatible.
- * The path here can be NULL. It should only be non-NULL if the
- * frontend user has set a specific save path.
- */
+ /* const char ** --
+ * Returns the "save" directory of the frontend.
+ * This directory can be used to store SRAM, memory cards,
+ * high scores, etc, if the libretro core
+ * cannot use the regular memory interface (retro_get_memory_data()).
+ *
+ * NOTE: libretro cores used to check GET_SYSTEM_DIRECTORY for
+ * similar things before.
+ * They should still check GET_SYSTEM_DIRECTORY if they want to
+ * be backwards compatible.
+ * The path here can be NULL. It should only be non-NULL if the
+ * frontend user has set a specific save path.
+ */
#define RETRO_ENVIRONMENT_SET_SYSTEM_AV_INFO 32
-/* const struct retro_system_av_info * --
- * Sets a new av_info structure. This can only be called from
- * within retro_run().
- * This should *only* be used if the core is completely altering the
- * internal resolutions, aspect ratios, timings, sampling rate, etc.
- * Calling this can require a full reinitialization of video/audio
- * drivers in the frontend,
- *
- * so it is important to call it very sparingly, and usually only with
- * the users explicit consent.
- * An eventual driver reinitialize will happen so that video and
- * audio callbacks
- * happening after this call within the same retro_run() call will
- * target the newly initialized driver.
- *
- * This callback makes it possible to support configurable resolutions
- * in games, which can be useful to
- * avoid setting the "worst case" in max_width/max_height.
- *
- * ***HIGHLY RECOMMENDED*** Do not call this callback every time
- * resolution changes in an emulator core if it's
- * expected to be a temporary change, for the reasons of possible
- * driver reinitialization.
- * This call is not a free pass for not trying to provide
- * correct values in retro_get_system_av_info(). If you need to change
- * things like aspect ratio or nominal width/height,
- * use RETRO_ENVIRONMENT_SET_GEOMETRY, which is a softer variant
- * of SET_SYSTEM_AV_INFO.
- *
- * If this returns false, the frontend does not acknowledge a
- * changed av_info struct.
- */
+ /* const struct retro_system_av_info * --
+ * Sets a new av_info structure. This can only be called from
+ * within retro_run().
+ * This should *only* be used if the core is completely altering the
+ * internal resolutions, aspect ratios, timings, sampling rate, etc.
+ * Calling this can require a full reinitialization of video/audio
+ * drivers in the frontend,
+ *
+ * so it is important to call it very sparingly, and usually only with
+ * the users explicit consent.
+ * An eventual driver reinitialize will happen so that video and
+ * audio callbacks
+ * happening after this call within the same retro_run() call will
+ * target the newly initialized driver.
+ *
+ * This callback makes it possible to support configurable resolutions
+ * in games, which can be useful to
+ * avoid setting the "worst case" in max_width/max_height.
+ *
+ * ***HIGHLY RECOMMENDED*** Do not call this callback every time
+ * resolution changes in an emulator core if it's
+ * expected to be a temporary change, for the reasons of possible
+ * driver reinitialization.
+ * This call is not a free pass for not trying to provide
+ * correct values in retro_get_system_av_info(). If you need to change
+ * things like aspect ratio or nominal width/height,
+ * use RETRO_ENVIRONMENT_SET_GEOMETRY, which is a softer variant
+ * of SET_SYSTEM_AV_INFO.
+ *
+ * If this returns false, the frontend does not acknowledge a
+ * changed av_info struct.
+ */
#define RETRO_ENVIRONMENT_SET_PROC_ADDRESS_CALLBACK 33
-/* const struct retro_get_proc_address_interface * --
- * Allows a libretro core to announce support for the
- * get_proc_address() interface.
- * This interface allows for a standard way to extend libretro where
- * use of environment calls are too indirect,
- * e.g. for cases where the frontend wants to call directly into the core.
- *
- * If a core wants to expose this interface, SET_PROC_ADDRESS_CALLBACK
- * **MUST** be called from within retro_set_environment().
- */
+ /* const struct retro_get_proc_address_interface * --
+ * Allows a libretro core to announce support for the
+ * get_proc_address() interface.
+ * This interface allows for a standard way to extend libretro where
+ * use of environment calls are too indirect,
+ * e.g. for cases where the frontend wants to call directly into the core.
+ *
+ * If a core wants to expose this interface, SET_PROC_ADDRESS_CALLBACK
+ * **MUST** be called from within retro_set_environment().
+ */
#define RETRO_ENVIRONMENT_SET_SUBSYSTEM_INFO 34
-/* const struct retro_subsystem_info * --
- * This environment call introduces the concept of libretro "subsystems".
- * A subsystem is a variant of a libretro core which supports
- * different kinds of games.
- * The purpose of this is to support e.g. emulators which might
- * have special needs, e.g. Super Nintendo's Super GameBoy, Sufami Turbo.
- * It can also be used to pick among subsystems in an explicit way
- * if the libretro implementation is a multi-system emulator itself.
- *
- * Loading a game via a subsystem is done with retro_load_game_special(),
- * and this environment call allows a libretro core to expose which
- * subsystems are supported for use with retro_load_game_special().
- * A core passes an array of retro_game_special_info which is terminated
- * with a zeroed out retro_game_special_info struct.
- *
- * If a core wants to use this functionality, SET_SUBSYSTEM_INFO
- * **MUST** be called from within retro_set_environment().
- */
+ /* const struct retro_subsystem_info * --
+ * This environment call introduces the concept of libretro "subsystems".
+ * A subsystem is a variant of a libretro core which supports
+ * different kinds of games.
+ * The purpose of this is to support e.g. emulators which might
+ * have special needs, e.g. Super Nintendo's Super GameBoy, Sufami Turbo.
+ * It can also be used to pick among subsystems in an explicit way
+ * if the libretro implementation is a multi-system emulator itself.
+ *
+ * Loading a game via a subsystem is done with retro_load_game_special(),
+ * and this environment call allows a libretro core to expose which
+ * subsystems are supported for use with retro_load_game_special().
+ * A core passes an array of retro_game_special_info which is terminated
+ * with a zeroed out retro_game_special_info struct.
+ *
+ * If a core wants to use this functionality, SET_SUBSYSTEM_INFO
+ * **MUST** be called from within retro_set_environment().
+ */
#define RETRO_ENVIRONMENT_SET_CONTROLLER_INFO 35
-/* const struct retro_controller_info * --
- * This environment call lets a libretro core tell the frontend
- * which controller types are recognized in calls to
- * retro_set_controller_port_device().
- *
- * Some emulators such as Super Nintendo
- * support multiple lightgun types which must be specifically
- * selected from.
- * It is therefore sometimes necessary for a frontend to be able
- * to tell the core about a special kind of input device which is
- * not covered by the libretro input API.
- *
- * In order for a frontend to understand the workings of an input device,
- * it must be a specialized type
- * of the generic device types already defined in the libretro API.
- *
- * Which devices are supported can vary per input port.
- * The core must pass an array of const struct retro_controller_info which
- * is terminated with a blanked out struct. Each element of the struct
- * corresponds to an ascending port index to
- * retro_set_controller_port_device().
- * Even if special device types are set in the libretro core,
- * libretro should only poll input based on the base input device types.
- */
+ /* const struct retro_controller_info * --
+ * This environment call lets a libretro core tell the frontend
+ * which controller types are recognized in calls to
+ * retro_set_controller_port_device().
+ *
+ * Some emulators such as Super Nintendo
+ * support multiple lightgun types which must be specifically
+ * selected from.
+ * It is therefore sometimes necessary for a frontend to be able
+ * to tell the core about a special kind of input device which is
+ * not covered by the libretro input API.
+ *
+ * In order for a frontend to understand the workings of an input device,
+ * it must be a specialized type
+ * of the generic device types already defined in the libretro API.
+ *
+ * Which devices are supported can vary per input port.
+ * The core must pass an array of const struct retro_controller_info which
+ * is terminated with a blanked out struct. Each element of the struct
+ * corresponds to an ascending port index to
+ * retro_set_controller_port_device().
+ * Even if special device types are set in the libretro core,
+ * libretro should only poll input based on the base input device types.
+ */
#define RETRO_ENVIRONMENT_SET_MEMORY_MAPS (36 | RETRO_ENVIRONMENT_EXPERIMENTAL)
-/* const struct retro_memory_map * --
- * This environment call lets a libretro core tell the frontend
- * about the memory maps this core emulates.
- * This can be used to implement, for example, cheats in a core-agnostic way.
- *
- * Should only be used by emulators; it doesn't make much sense for
- * anything else.
- * It is recommended to expose all relevant pointers through
- * retro_get_memory_* as well.
- *
- * Can be called from retro_init and retro_load_game.
- */
+ /* const struct retro_memory_map * --
+ * This environment call lets a libretro core tell the frontend
+ * about the memory maps this core emulates.
+ * This can be used to implement, for example, cheats in a core-agnostic way.
+ *
+ * Should only be used by emulators; it doesn't make much sense for
+ * anything else.
+ * It is recommended to expose all relevant pointers through
+ * retro_get_memory_* as well.
+ *
+ * Can be called from retro_init and retro_load_game.
+ */
#define RETRO_ENVIRONMENT_SET_GEOMETRY 37
-/* const struct retro_game_geometry * --
- * This environment call is similar to SET_SYSTEM_AV_INFO for changing
- * video parameters, but provides a guarantee that drivers will not be
- * reinitialized.
- * This can only be called from within retro_run().
- *
- * The purpose of this call is to allow a core to alter nominal
- * width/heights as well as aspect ratios on-the-fly, which can be
- * useful for some emulators to change in run-time.
- *
- * max_width/max_height arguments are ignored and cannot be changed
- * with this call as this could potentially require a reinitialization or a
- * non-constant time operation.
- * If max_width/max_height are to be changed, SET_SYSTEM_AV_INFO is required.
- *
- * A frontend must guarantee that this environment call completes in
- * constant time.
- */
-#define RETRO_ENVIRONMENT_GET_USERNAME 38
-/* const char **
- * Returns the specified username of the frontend, if specified by the user.
- * This username can be used as a nickname for a core that has online facilities
- * or any other mode where personalization of the user is desirable.
- * The returned value can be NULL.
- * If this environ callback is used by a core that requires a valid username,
- * a default username should be specified by the core.
- */
+ /* const struct retro_game_geometry * --
+ * This environment call is similar to SET_SYSTEM_AV_INFO for changing
+ * video parameters, but provides a guarantee that drivers will not be
+ * reinitialized.
+ * This can only be called from within retro_run().
+ *
+ * The purpose of this call is to allow a core to alter nominal
+ * width/heights as well as aspect ratios on-the-fly, which can be
+ * useful for some emulators to change in run-time.
+ *
+ * max_width/max_height arguments are ignored and cannot be changed
+ * with this call as this could potentially require a reinitialization or a
+ * non-constant time operation.
+ * If max_width/max_height are to be changed, SET_SYSTEM_AV_INFO is required.
+ *
+ * A frontend must guarantee that this environment call completes in
+ * constant time.
+ */
+#define RETRO_ENVIRONMENT_GET_USERNAME 38
+ /* const char **
+ * Returns the specified username of the frontend, if specified by the user.
+ * This username can be used as a nickname for a core that has online facilities
+ * or any other mode where personalization of the user is desirable.
+ * The returned value can be NULL.
+ * If this environ callback is used by a core that requires a valid username,
+ * a default username should be specified by the core.
+ */
#define RETRO_ENVIRONMENT_GET_LANGUAGE 39
-/* unsigned * --
- * Returns the specified language of the frontend, if specified by the user.
- * It can be used by the core for localization purposes.
- */
+ /* unsigned * --
+ * Returns the specified language of the frontend, if specified by the user.
+ * It can be used by the core for localization purposes.
+ */
+#define RETRO_ENVIRONMENT_GET_CURRENT_SOFTWARE_FRAMEBUFFER (40 | RETRO_ENVIRONMENT_EXPERIMENTAL)
+ /* struct retro_framebuffer * --
+ * Returns a preallocated framebuffer which the core can use for rendering
+ * the frame into when not using SET_HW_RENDER.
+ * The framebuffer returned from this call must not be used
+ * after the current call to retro_run() returns.
+ *
+ * The goal of this call is to allow zero-copy behavior where a core
+ * can render directly into video memory, avoiding extra bandwidth cost by copying
+ * memory from core to video memory.
+ *
+ * If this call succeeds and the core renders into it,
+ * the framebuffer pointer and pitch can be passed to retro_video_refresh_t.
+ * If the buffer from GET_CURRENT_SOFTWARE_FRAMEBUFFER is to be used,
+ * the core must pass the exact
+ * same pointer as returned by GET_CURRENT_SOFTWARE_FRAMEBUFFER;
+ * i.e. passing a pointer which is offset from the
+ * buffer is undefined. The width, height and pitch parameters
+ * must also match exactly to the values obtained from GET_CURRENT_SOFTWARE_FRAMEBUFFER.
+ *
+ * It is possible for a frontend to return a different pixel format
+ * than the one used in SET_PIXEL_FORMAT. This can happen if the frontend
+ * needs to perform conversion.
+ *
+ * It is still valid for a core to render to a different buffer
+ * even if GET_CURRENT_SOFTWARE_FRAMEBUFFER succeeds.
+ *
+ * A frontend must make sure that the pointer obtained from this function is
+ * writeable (and readable).
+ */
+
+enum retro_hw_render_interface_type
+{
+ RETRO_HW_RENDER_INTERFACE_VULKAN = 0,
+ RETRO_HW_RENDER_INTERFACE_DUMMY = INT_MAX
+};
+
+/* Base struct. All retro_hw_render_interface_* types
+ * contain at least these fields. */
+struct retro_hw_render_interface
+{
+ enum retro_hw_render_interface_type interface_type;
+ unsigned interface_version;
+};
+#define RETRO_ENVIRONMENT_GET_HW_RENDER_INTERFACE (41 | RETRO_ENVIRONMENT_EXPERIMENTAL)
+ /* const struct retro_hw_render_interface ** --
+ * Returns an API specific rendering interface for accessing API specific data.
+ * Not all HW rendering APIs support or need this.
+ * The contents of the returned pointer is specific to the rendering API
+ * being used. See the various headers like libretro_vulkan.h, etc.
+ *
+ * GET_HW_RENDER_INTERFACE cannot be called before context_reset has been called.
+ * Similarly, after context_destroyed callback returns,
+ * the contents of the HW_RENDER_INTERFACE are invalidated.
+ */
+
+#define RETRO_ENVIRONMENT_SET_SUPPORT_ACHIEVEMENTS (42 | RETRO_ENVIRONMENT_EXPERIMENTAL)
+ /* const bool * --
+ * If true, the libretro implementation supports achievements
+ * either via memory descriptors set with RETRO_ENVIRONMENT_SET_MEMORY_MAPS
+ * or via retro_get_memory_data/retro_get_memory_size.
+ *
+ * This must be called before the first call to retro_run.
+ */
+
+enum retro_hw_render_context_negotiation_interface_type
+{
+ RETRO_HW_RENDER_CONTEXT_NEGOTIATION_INTERFACE_VULKAN = 0,
+ RETRO_HW_RENDER_CONTEXT_NEGOTIATION_INTERFACE_DUMMY = INT_MAX
+};
+
+/* Base struct. All retro_hw_render_context_negotiation_interface_* types
+ * contain at least these fields. */
+struct retro_hw_render_context_negotiation_interface
+{
+ enum retro_hw_render_context_negotiation_interface_type interface_type;
+ unsigned interface_version;
+};
+#define RETRO_ENVIRONMENT_SET_HW_RENDER_CONTEXT_NEGOTIATION_INTERFACE (43 | RETRO_ENVIRONMENT_EXPERIMENTAL)
+ /* const struct retro_hw_render_context_negotiation_interface * --
+ * Sets an interface which lets the libretro core negotiate with frontend how a context is created.
+ * The semantics of this interface depends on which API is used in SET_HW_RENDER earlier.
+ * This interface will be used when the frontend is trying to create a HW rendering context,
+ * so it will be used after SET_HW_RENDER, but before the context_reset callback.
+ */
#define RETRO_MEMDESC_CONST (1 << 0) /* The frontend will never change this memory area once retro_load_game has returned. */
#define RETRO_MEMDESC_BIGENDIAN (1 << 1) /* The memory area contains big endian data. Default is little endian. */
@@ -845,56 +969,56 @@ struct retro_memory_descriptor
uint64_t flags;
/* Pointer to the start of the relevant ROM or RAM chip.
- * It's strongly recommended to use 'offset' if possible, rather than
+ * It's strongly recommended to use 'offset' if possible, rather than
* doing math on the pointer.
*
- * If the same byte is mapped my multiple descriptors, their descriptors
+ * If the same byte is mapped my multiple descriptors, their descriptors
* must have the same pointer.
- * If 'start' does not point to the first byte in the pointer, put the
+ * If 'start' does not point to the first byte in the pointer, put the
* difference in 'offset' instead.
*
- * May be NULL if there's nothing usable here (e.g. hardware registers and
+ * May be NULL if there's nothing usable here (e.g. hardware registers and
* open bus). No flags should be set if the pointer is NULL.
* It's recommended to minimize the number of descriptors if possible,
* but not mandatory. */
- void* ptr;
+ void *ptr;
size_t offset;
- /* This is the location in the emulated address space
+ /* This is the location in the emulated address space
* where the mapping starts. */
size_t start;
/* Which bits must be same as in 'start' for this mapping to apply.
- * The first memory descriptor to claim a certain byte is the one
+ * The first memory descriptor to claim a certain byte is the one
* that applies.
* A bit which is set in 'start' must also be set in this.
- * Can be zero, in which case each byte is assumed mapped exactly once.
+ * Can be zero, in which case each byte is assumed mapped exactly once.
* In this case, 'len' must be a power of two. */
size_t select;
- /* If this is nonzero, the set bits are assumed not connected to the
+ /* If this is nonzero, the set bits are assumed not connected to the
* memory chip's address pins. */
size_t disconnect;
/* This one tells the size of the current memory area.
- * If, after start+disconnect are applied, the address is higher than
+ * If, after start+disconnect are applied, the address is higher than
* this, the highest bit of the address is cleared.
*
* If the address is still too high, the next highest bit is cleared.
- * Can be zero, in which case it's assumed to be infinite (as limited
+ * Can be zero, in which case it's assumed to be infinite (as limited
* by 'select' and 'disconnect'). */
size_t len;
- /* To go from emulated address to physical address, the following
+ /* To go from emulated address to physical address, the following
* order applies:
- * Subtract 'start', pick off 'disconnect', apply 'len', add 'offset'.
- *
- * The address space name must consist of only a-zA-Z0-9_-,
+ * Subtract 'start', pick off 'disconnect', apply 'len', add 'offset'. */
+
+ /* The address space name must consist of only a-zA-Z0-9_-,
* should be as short as feasible (maximum length is 8 plus the NUL),
- * and may not be any other address space plus one or more 0-9A-F
+ * and may not be any other address space plus one or more 0-9A-F
* at the end.
- * However, multiple memory descriptors for the same address space is
- * allowed, and the address space name can be empty. NULL is treated
+ * However, multiple memory descriptors for the same address space is
+ * allowed, and the address space name can be empty. NULL is treated
* as empty.
*
* Address space names are case sensitive, but avoid lowercase if possible.
@@ -908,27 +1032,58 @@ struct retro_memory_descriptor
* 'a'+blank - valid ('a' is not in 0-9A-F)
* 'a'+'A' - valid (neither is a prefix of each other)
* 'AR'+blank - valid ('R' is not in 0-9A-F)
- * 'ARB'+blank - valid (the B can't be part of the address either, because
- * there is no namespace 'AR')
- * blank+'B' - not valid, because it's ambigous which address space B1234
- * would refer to.
- * The length can't be used for that purpose; the frontend may want
+ * 'ARB'+blank - valid (the B can't be part of the address either, because
+ * there is no namespace 'AR')
+ * blank+'B' - not valid, because it's ambigous which address space B1234
+ * would refer to.
+ * The length can't be used for that purpose; the frontend may want
* to append arbitrary data to an address, without a separator. */
- const char* addrspace;
+ const char *addrspace;
+
+ /* TODO: When finalizing this one, add a description field, which should be
+ * "WRAM" or something roughly equally long. */
+
+ /* TODO: When finalizing this one, replace 'select' with 'limit', which tells
+ * which bits can vary and still refer to the same address (limit = ~select).
+ * TODO: limit? range? vary? something else? */
+
+ /* TODO: When finalizing this one, if 'len' is above what 'select' (or
+ * 'limit') allows, it's bankswitched. Bankswitched data must have both 'len'
+ * and 'select' != 0, and the mappings don't tell how the system switches the
+ * banks. */
+
+ /* TODO: When finalizing this one, fix the 'len' bit removal order.
+ * For len=0x1800, pointer 0x1C00 should go to 0x1400, not 0x0C00.
+ * Algorithm: Take bits highest to lowest, but if it goes above len, clear
+ * the most recent addition and continue on the next bit.
+ * TODO: Can the above be optimized? Is "remove the lowest bit set in both
+ * pointer and 'len'" equivalent? */
+
+ /* TODO: Some emulators (MAME?) emulate big endian systems by only accessing
+ * the emulated memory in 32-bit chunks, native endian. But that's nothing
+ * compared to Darek Mihocka <http://www.emulators.com/docs/nx07_vm101.htm>
+ * (section Emulation 103 - Nearly Free Byte Reversal) - he flips the ENTIRE
+ * RAM backwards! I'll want to represent both of those, via some flags.
+ *
+ * I suspect MAME either didn't think of that idea, or don't want the #ifdef.
+ * Not sure which, nor do I really care. */
+
+ /* TODO: Some of those flags are unused and/or don't really make sense. Clean
+ * them up. */
};
-/* The frontend may use the largest value of 'start'+'select' in a
+/* The frontend may use the largest value of 'start'+'select' in a
* certain namespace to infer the size of the address space.
*
- * If the address space is larger than that, a mapping with .ptr=NULL
- * should be at the end of the array, with .select set to all ones for
+ * If the address space is larger than that, a mapping with .ptr=NULL
+ * should be at the end of the array, with .select set to all ones for
* as long as the address space is big.
*
* Sample descriptors (minus .ptr, and RETRO_MEMFLAG_ on the flags):
* SNES WRAM:
* .start=0x7E0000, .len=0x20000
- * (Note that this must be mapped before the ROM in most cases; some of the
- * ROM mappers
+ * (Note that this must be mapped before the ROM in most cases; some of the
+ * ROM mappers
* try to claim $7E0000, or at least $7E8000.)
* SNES SPC700 RAM:
* .addrspace="S", .len=0x10000
@@ -937,7 +1092,7 @@ struct retro_memory_descriptor
* .flags=MIRROR, .start=0x800000, .select=0xC0E000, .len=0x2000
* SNES WRAM mirrors, alternate equivalent descriptor:
* .flags=MIRROR, .select=0x40E000, .disconnect=~0x1FFF
- * (Various similar constructions can be created by combining parts of
+ * (Various similar constructions can be created by combining parts of
* the above two.)
* SNES LoROM (512KB, mirrored a couple of times):
* .flags=CONST, .start=0x008000, .select=0x408000, .disconnect=0x8000, .len=512*1024
@@ -957,19 +1112,19 @@ struct retro_memory_descriptor
struct retro_memory_map
{
- const struct retro_memory_descriptor* descriptors;
+ const struct retro_memory_descriptor *descriptors;
unsigned num_descriptors;
};
struct retro_controller_description
{
- /* Human-readable description of the controller. Even if using a generic
- * input device type, this can be set to the particular device type the
+ /* Human-readable description of the controller. Even if using a generic
+ * input device type, this can be set to the particular device type the
* core uses. */
- const char* desc;
+ const char *desc;
- /* Device type passed to retro_set_controller_port_device(). If the device
- * type is a sub-class of a generic input device type, use the
+ /* Device type passed to retro_set_controller_port_device(). If the device
+ * type is a sub-class of a generic input device type, use the
* RETRO_DEVICE_SUBCLASS macro to create an ID.
*
* E.g. RETRO_DEVICE_SUBCLASS(RETRO_DEVICE_JOYPAD, 1). */
@@ -978,17 +1133,17 @@ struct retro_controller_description
struct retro_controller_info
{
- const struct retro_controller_description* types;
+ const struct retro_controller_description *types;
unsigned num_types;
};
struct retro_subsystem_memory_info
{
/* The extension associated with a memory type, e.g. "psram". */
- const char* extension;
+ const char *extension;
- /* The memory type for retro_get_memory(). This should be at
- * least 0x100 to avoid conflict with standardized
+ /* The memory type for retro_get_memory(). This should be at
+ * least 0x100 to avoid conflict with standardized
* libretro memory types. */
unsigned type;
};
@@ -996,10 +1151,10 @@ struct retro_subsystem_memory_info
struct retro_subsystem_rom_info
{
/* Describes what the content is (SGB BIOS, GB ROM, etc). */
- const char* desc;
+ const char *desc;
/* Same definition as retro_get_system_info(). */
- const char* valid_extensions;
+ const char *valid_extensions;
/* Same definition as retro_get_system_info(). */
bool need_fullpath;
@@ -1007,60 +1162,60 @@ struct retro_subsystem_rom_info
/* Same definition as retro_get_system_info(). */
bool block_extract;
- /* This is set if the content is required to load a game.
+ /* This is set if the content is required to load a game.
* If this is set to false, a zeroed-out retro_game_info can be passed. */
bool required;
- /* Content can have multiple associated persistent
+ /* Content can have multiple associated persistent
* memory types (retro_get_memory()). */
- const struct retro_subsystem_memory_info* memory;
+ const struct retro_subsystem_memory_info *memory;
unsigned num_memory;
};
struct retro_subsystem_info
{
/* Human-readable string of the subsystem type, e.g. "Super GameBoy" */
- const char* desc;
+ const char *desc;
/* A computer friendly short string identifier for the subsystem type.
* This name must be [a-z].
* E.g. if desc is "Super GameBoy", this can be "sgb".
* This identifier can be used for command-line interfaces, etc.
*/
- const char* ident;
+ const char *ident;
- /* Infos for each content file. The first entry is assumed to be the
+ /* Infos for each content file. The first entry is assumed to be the
* "most significant" content for frontend purposes.
- * E.g. with Super GameBoy, the first content should be the GameBoy ROM,
+ * E.g. with Super GameBoy, the first content should be the GameBoy ROM,
* as it is the most "significant" content to a user.
- * If a frontend creates new file paths based on the content used
+ * If a frontend creates new file paths based on the content used
* (e.g. savestates), it should use the path for the first ROM to do so. */
- const struct retro_subsystem_rom_info* roms;
+ const struct retro_subsystem_rom_info *roms;
/* Number of content files associated with a subsystem. */
unsigned num_roms;
-
+
/* The type passed to retro_load_game_special(). */
unsigned id;
};
-typedef void (*retro_proc_address_t)(void);
+typedef void (RETRO_CALLCONV *retro_proc_address_t)(void);
/* libretro API extension functions:
* (None here so far).
*
* Get a symbol from a libretro core.
- * Cores should only return symbols which are actual
+ * Cores should only return symbols which are actual
* extensions to the libretro API.
*
- * Frontends should not use this to obtain symbols to standard
+ * Frontends should not use this to obtain symbols to standard
* libretro entry points (static linking or dlsym).
*
- * The symbol name must be equal to the function name,
+ * The symbol name must be equal to the function name,
* e.g. if void retro_foo(void); exists, the symbol must be called "retro_foo".
* The returned function pointer must be cast to the corresponding type.
*/
-typedef retro_proc_address_t (*retro_get_proc_address_t)(const char* sym);
+typedef retro_proc_address_t (RETRO_CALLCONV *retro_get_proc_address_t)(const char *sym);
struct retro_get_proc_address_interface
{
@@ -1078,8 +1233,8 @@ enum retro_log_level
};
/* Logging function. Takes log level argument as well. */
-typedef void (*retro_log_printf_t)(enum retro_log_level level,
- const char* fmt, ...);
+typedef void (RETRO_CALLCONV *retro_log_printf_t)(enum retro_log_level level,
+ const char *fmt, ...);
struct retro_log_callback
{
@@ -1105,13 +1260,17 @@ struct retro_log_callback
#define RETRO_SIMD_VFPU (1 << 13)
#define RETRO_SIMD_PS (1 << 14)
#define RETRO_SIMD_AES (1 << 15)
+#define RETRO_SIMD_VFPV3 (1 << 16)
+#define RETRO_SIMD_VFPV4 (1 << 17)
+#define RETRO_SIMD_POPCNT (1 << 18)
+#define RETRO_SIMD_MOVBE (1 << 19)
typedef uint64_t retro_perf_tick_t;
typedef int64_t retro_time_t;
struct retro_perf_counter
{
- const char* ident;
+ const char *ident;
retro_perf_tick_t start;
retro_perf_tick_t total;
retro_perf_tick_t call_cnt;
@@ -1122,34 +1281,34 @@ struct retro_perf_counter
/* Returns current time in microseconds.
* Tries to use the most accurate timer available.
*/
-typedef retro_time_t (*retro_perf_get_time_usec_t)(void);
+typedef retro_time_t (RETRO_CALLCONV *retro_perf_get_time_usec_t)(void);
/* A simple counter. Usually nanoseconds, but can also be CPU cycles.
- * Can be used directly if desired (when creating a more sophisticated
+ * Can be used directly if desired (when creating a more sophisticated
* performance counter system).
* */
-typedef retro_perf_tick_t (*retro_perf_get_counter_t)(void);
+typedef retro_perf_tick_t (RETRO_CALLCONV *retro_perf_get_counter_t)(void);
/* Returns a bit-mask of detected CPU features (RETRO_SIMD_*). */
-typedef uint64_t (*retro_get_cpu_features_t)(void);
+typedef uint64_t (RETRO_CALLCONV *retro_get_cpu_features_t)(void);
/* Asks frontend to log and/or display the state of performance counters.
* Performance counters can always be poked into manually as well.
*/
-typedef void (*retro_perf_log_t)(void);
+typedef void (RETRO_CALLCONV *retro_perf_log_t)(void);
/* Register a performance counter.
- * ident field must be set with a discrete value and other values in
+ * ident field must be set with a discrete value and other values in
* retro_perf_counter must be 0.
- * Registering can be called multiple times. To avoid calling to
+ * Registering can be called multiple times. To avoid calling to
* frontend redundantly, you can check registered field first. */
-typedef void (*retro_perf_register_t)(struct retro_perf_counter* counter);
+typedef void (RETRO_CALLCONV *retro_perf_register_t)(struct retro_perf_counter *counter);
/* Starts a registered counter. */
-typedef void (*retro_perf_start_t)(struct retro_perf_counter* counter);
+typedef void (RETRO_CALLCONV *retro_perf_start_t)(struct retro_perf_counter *counter);
/* Stops a registered counter. */
-typedef void (*retro_perf_stop_t)(struct retro_perf_counter* counter);
+typedef void (RETRO_CALLCONV *retro_perf_stop_t)(struct retro_perf_counter *counter);
/* For convenience it can be useful to wrap register, start and stop in macros.
* E.g.:
@@ -1212,10 +1371,10 @@ enum retro_sensor_action
#define RETRO_SENSOR_ACCELEROMETER_Y 1
#define RETRO_SENSOR_ACCELEROMETER_Z 2
-typedef bool (*retro_set_sensor_state_t)(unsigned port,
+typedef bool (RETRO_CALLCONV *retro_set_sensor_state_t)(unsigned port,
enum retro_sensor_action action, unsigned rate);
-typedef float(*retro_sensor_get_input_t)(unsigned port, unsigned id);
+typedef float (RETRO_CALLCONV *retro_sensor_get_input_t)(unsigned port, unsigned id);
struct retro_sensor_interface
{
@@ -1232,76 +1391,80 @@ enum retro_camera_buffer
};
/* Starts the camera driver. Can only be called in retro_run(). */
-typedef bool (*retro_camera_start_t)(void);
+typedef bool (RETRO_CALLCONV *retro_camera_start_t)(void);
/* Stops the camera driver. Can only be called in retro_run(). */
-typedef void (*retro_camera_stop_t)(void);
+typedef void (RETRO_CALLCONV *retro_camera_stop_t)(void);
-/* Callback which signals when the camera driver is initialized
+/* Callback which signals when the camera driver is initialized
* and/or deinitialized.
* retro_camera_start_t can be called in initialized callback.
*/
-typedef void (*retro_camera_lifetime_status_t)(void);
+typedef void (RETRO_CALLCONV *retro_camera_lifetime_status_t)(void);
/* A callback for raw framebuffer data. buffer points to an XRGB8888 buffer.
* Width, height and pitch are similar to retro_video_refresh_t.
* First pixel is top-left origin.
*/
-typedef void (*retro_camera_frame_raw_framebuffer_t)(const uint32_t* buffer,
+typedef void (RETRO_CALLCONV *retro_camera_frame_raw_framebuffer_t)(const uint32_t *buffer,
unsigned width, unsigned height, size_t pitch);
/* A callback for when OpenGL textures are used.
*
* texture_id is a texture owned by camera driver.
- * Its state or content should be considered immutable, except for things like
+ * Its state or content should be considered immutable, except for things like
* texture filtering and clamping.
*
* texture_target is the texture target for the GL texture.
- * These can include e.g. GL_TEXTURE_2D, GL_TEXTURE_RECTANGLE, and possibly
+ * These can include e.g. GL_TEXTURE_2D, GL_TEXTURE_RECTANGLE, and possibly
* more depending on extensions.
*
- * affine points to a packed 3x3 column-major matrix used to apply an affine
+ * affine points to a packed 3x3 column-major matrix used to apply an affine
* transform to texture coordinates. (affine_matrix * vec3(coord_x, coord_y, 1.0))
- * After transform, normalized texture coord (0, 0) should be bottom-left
+ * After transform, normalized texture coord (0, 0) should be bottom-left
* and (1, 1) should be top-right (or (width, height) for RECTANGLE).
*
- * GL-specific typedefs are avoided here to avoid relying on gl.h in
+ * GL-specific typedefs are avoided here to avoid relying on gl.h in
* the API definition.
*/
-typedef void (*retro_camera_frame_opengl_texture_t)(unsigned texture_id,
- unsigned texture_target, const float* affine);
+typedef void (RETRO_CALLCONV *retro_camera_frame_opengl_texture_t)(unsigned texture_id,
+ unsigned texture_target, const float *affine);
struct retro_camera_callback
{
- /* Set by libretro core.
+ /* Set by libretro core.
* Example bitmask: caps = (1 << RETRO_CAMERA_BUFFER_OPENGL_TEXTURE) | (1 << RETRO_CAMERA_BUFFER_RAW_FRAMEBUFFER).
*/
- uint64_t caps;
+ uint64_t caps;
- unsigned width; /* Desired resolution for camera. Is only used as a hint. */
+ /* Desired resolution for camera. Is only used as a hint. */
+ unsigned width;
unsigned height;
- retro_camera_start_t start; /* Set by frontend. */
- retro_camera_stop_t stop; /* Set by frontend. */
+
+ /* Set by frontend. */
+ retro_camera_start_t start;
+ retro_camera_stop_t stop;
/* Set by libretro core if raw framebuffer callbacks will be used. */
retro_camera_frame_raw_framebuffer_t frame_raw_framebuffer;
+
/* Set by libretro core if OpenGL texture callbacks will be used. */
- retro_camera_frame_opengl_texture_t frame_opengl_texture;
+ retro_camera_frame_opengl_texture_t frame_opengl_texture;
- /* Set by libretro core. Called after camera driver is initialized and
+ /* Set by libretro core. Called after camera driver is initialized and
* ready to be started.
* Can be NULL, in which this callback is not called.
*/
retro_camera_lifetime_status_t initialized;
- /* Set by libretro core. Called right before camera driver is
+ /* Set by libretro core. Called right before camera driver is
* deinitialized.
* Can be NULL, in which this callback is not called.
*/
retro_camera_lifetime_status_t deinitialized;
};
-/* Sets the interval of time and/or distance at which to update/poll
+/* Sets the interval of time and/or distance at which to update/poll
* location-based data.
*
* To ensure compatibility with all location-based implementations,
@@ -1310,28 +1473,28 @@ struct retro_camera_callback
* interval_ms is the interval expressed in milliseconds.
* interval_distance is the distance interval expressed in meters.
*/
-typedef void (*retro_location_set_interval_t)(unsigned interval_ms,
+typedef void (RETRO_CALLCONV *retro_location_set_interval_t)(unsigned interval_ms,
unsigned interval_distance);
/* Start location services. The device will start listening for changes to the
- * current location at regular intervals (which are defined with
+ * current location at regular intervals (which are defined with
* retro_location_set_interval_t). */
-typedef bool (*retro_location_start_t)(void);
+typedef bool (RETRO_CALLCONV *retro_location_start_t)(void);
-/* Stop location services. The device will stop listening for changes
+/* Stop location services. The device will stop listening for changes
* to the current location. */
-typedef void (*retro_location_stop_t)(void);
+typedef void (RETRO_CALLCONV *retro_location_stop_t)(void);
-/* Get the position of the current location. Will set parameters to
+/* Get the position of the current location. Will set parameters to
* 0 if no new location update has happened since the last time. */
-typedef bool (*retro_location_get_position_t)(double* lat, double* lon,
- double* horiz_accuracy, double* vert_accuracy);
+typedef bool (RETRO_CALLCONV *retro_location_get_position_t)(double *lat, double *lon,
+ double *horiz_accuracy, double *vert_accuracy);
-/* Callback which signals when the location driver is initialized
+/* Callback which signals when the location driver is initialized
* and/or deinitialized.
* retro_location_start_t can be called in initialized callback.
*/
-typedef void (*retro_location_lifetime_status_t)(void);
+typedef void (RETRO_CALLCONV *retro_location_lifetime_status_t)(void);
struct retro_location_callback
{
@@ -1352,14 +1515,14 @@ enum retro_rumble_effect
RETRO_RUMBLE_DUMMY = INT_MAX
};
-/* Sets rumble state for joypad plugged in port 'port'.
+/* Sets rumble state for joypad plugged in port 'port'.
* Rumble effects are controlled independently,
* and setting e.g. strong rumble does not override weak rumble.
* Strength has a range of [0, 0xffff].
*
- * Returns true if rumble state request was honored.
+ * Returns true if rumble state request was honored.
* Calling this before first retro_run() is likely to return false. */
-typedef bool (*retro_set_rumble_state_t)(unsigned port,
+typedef bool (RETRO_CALLCONV *retro_set_rumble_state_t)(unsigned port,
enum retro_rumble_effect effect, uint16_t strength);
struct retro_rumble_interface
@@ -1368,16 +1531,16 @@ struct retro_rumble_interface
};
/* Notifies libretro that audio data should be written. */
-typedef void (*retro_audio_callback_t)(void);
+typedef void (RETRO_CALLCONV *retro_audio_callback_t)(void);
-/* True: Audio driver in frontend is active, and callback is
+/* True: Audio driver in frontend is active, and callback is
* expected to be called regularily.
- * False: Audio driver in frontend is paused or inactive.
- * Audio callback will not be called until set_state has been
+ * False: Audio driver in frontend is paused or inactive.
+ * Audio callback will not be called until set_state has been
* called with true.
* Initial state is false (inactive).
*/
-typedef void (*retro_audio_set_state_callback_t)(bool enabled);
+typedef void (RETRO_CALLCONV *retro_audio_set_state_callback_t)(bool enabled);
struct retro_audio_callback
{
@@ -1385,21 +1548,21 @@ struct retro_audio_callback
retro_audio_set_state_callback_t set_state;
};
-/* Notifies a libretro core of time spent since last invocation
+/* Notifies a libretro core of time spent since last invocation
* of retro_run() in microseconds.
*
* It will be called right before retro_run() every frame.
- * The frontend can tamper with timing to support cases like
+ * The frontend can tamper with timing to support cases like
* fast-forward, slow-motion and framestepping.
*
* In those scenarios the reference frame time value will be used. */
typedef int64_t retro_usec_t;
-typedef void (*retro_frame_time_callback_t)(retro_usec_t usec);
+typedef void (RETRO_CALLCONV *retro_frame_time_callback_t)(retro_usec_t usec);
struct retro_frame_time_callback
{
retro_frame_time_callback_t callback;
- /* Represents the time of one frame. It is computed as
- * 1000000 / fps, but the implementation will resolve the
+ /* Represents the time of one frame. It is computed as
+ * 1000000 / fps, but the implementation will resolve the
* rounding to ensure that framestepping, etc is exact. */
retro_usec_t reference;
};
@@ -1415,24 +1578,24 @@ struct retro_frame_time_callback
* it should implement context_destroy callback.
* If called, all GPU resources must be reinitialized.
* Usually called when frontend reinits video driver.
- * Also called first time video driver is initialized,
+ * Also called first time video driver is initialized,
* allowing libretro core to initialize resources.
*/
-typedef void (*retro_hw_context_reset_t)(void);
+typedef void (RETRO_CALLCONV *retro_hw_context_reset_t)(void);
/* Gets current framebuffer which is to be rendered to.
* Could change every frame potentially.
*/
-typedef uintptr_t (*retro_hw_get_current_framebuffer_t)(void);
+typedef uintptr_t (RETRO_CALLCONV *retro_hw_get_current_framebuffer_t)(void);
/* Get a symbol from HW context. */
-typedef retro_proc_address_t (*retro_hw_get_proc_address_t)(const char* sym);
+typedef retro_proc_address_t (RETRO_CALLCONV *retro_hw_get_proc_address_t)(const char *sym);
enum retro_hw_context_type
{
RETRO_HW_CONTEXT_NONE = 0,
/* OpenGL 2.x. Driver can choose to use latest compatibility context. */
- RETRO_HW_CONTEXT_OPENGL = 1,
+ RETRO_HW_CONTEXT_OPENGL = 1,
/* OpenGL ES 2.0. */
RETRO_HW_CONTEXT_OPENGLES2 = 2,
/* Modern desktop core GL context. Use version_major/
@@ -1444,6 +1607,9 @@ enum retro_hw_context_type
* use the corresponding enums directly. */
RETRO_HW_CONTEXT_OPENGLES_VERSION = 5,
+ /* Vulkan, see RETRO_ENVIRONMENT_GET_HW_RENDER_INTERFACE. */
+ RETRO_HW_CONTEXT_VULKAN = 6,
+
RETRO_HW_CONTEXT_DUMMY = INT_MAX
};
@@ -1455,10 +1621,10 @@ struct retro_hw_render_callback
/* Called when a context has been created or when it has been reset.
* An OpenGL context is only valid after context_reset() has been called.
*
- * When context_reset is called, OpenGL resources in the libretro
+ * When context_reset is called, OpenGL resources in the libretro
* implementation are guaranteed to be invalid.
*
- * It is possible that context_reset is called multiple times during an
+ * It is possible that context_reset is called multiple times during an
* application lifecycle.
* If context_reset is called without any notification (context_destroy),
* the OpenGL context was lost and resources should just be recreated
@@ -1466,58 +1632,64 @@ struct retro_hw_render_callback
*/
retro_hw_context_reset_t context_reset;
- /* Set by frontend. */
+ /* Set by frontend.
+ * TODO: This is rather obsolete. The frontend should not
+ * be providing preallocated framebuffers. */
retro_hw_get_current_framebuffer_t get_current_framebuffer;
/* Set by frontend. */
retro_hw_get_proc_address_t get_proc_address;
- /* Set if render buffers should have depth component attached. */
+ /* Set if render buffers should have depth component attached.
+ * TODO: Obsolete. */
bool depth;
- /* Set if stencil buffers should be attached. */
+ /* Set if stencil buffers should be attached.
+ * TODO: Obsolete. */
bool stencil;
- /* If depth and stencil are true, a packed 24/8 buffer will be added.
+ /* If depth and stencil are true, a packed 24/8 buffer will be added.
* Only attaching stencil is invalid and will be ignored. */
- /* Use conventional bottom-left origin convention. If false,
- * standard libretro top-left origin semantics are used. */
+ /* Use conventional bottom-left origin convention. If false,
+ * standard libretro top-left origin semantics are used.
+ * TODO: Move to GL specific interface. */
bool bottom_left_origin;
-
+
/* Major version number for core GL context or GLES 3.1+. */
unsigned version_major;
/* Minor version number for core GL context or GLES 3.1+. */
unsigned version_minor;
- /* If this is true, the frontend will go very far to avoid
+ /* If this is true, the frontend will go very far to avoid
* resetting context in scenarios like toggling fullscreen, etc.
+ * TODO: Obsolete? Maybe frontend should just always assume this ...
*/
bool cache_context;
- /* The reset callback might still be called in extreme situations
+ /* The reset callback might still be called in extreme situations
* such as if the context is lost beyond recovery.
*
- * For optimal stability, set this to false, and allow context to be
+ * For optimal stability, set this to false, and allow context to be
* reset at any time.
*/
-
- /* A callback to be called before the context is destroyed in a
+
+ /* A callback to be called before the context is destroyed in a
* controlled way by the frontend. */
retro_hw_context_reset_t context_destroy;
/* OpenGL resources can be deinitialized cleanly at this step.
- * context_destroy can be set to NULL, in which resources will
+ * context_destroy can be set to NULL, in which resources will
* just be destroyed without any notification.
*
- * Even when context_destroy is non-NULL, it is possible that
+ * Even when context_destroy is non-NULL, it is possible that
* context_reset is called without any destroy notification.
- * This happens if context is lost by external factors (such as
+ * This happens if context is lost by external factors (such as
* notified by GL_ARB_robustness).
*
* In this case, the context is assumed to be already dead,
- * and the libretro implementation must not try to free any OpenGL
+ * and the libretro implementation must not try to free any OpenGL
* resources in the subsequent context_reset.
*/
@@ -1525,7 +1697,7 @@ struct retro_hw_render_callback
bool debug_context;
};
-/* Callback type passed in RETRO_ENVIRONMENT_SET_KEYBOARD_CALLBACK.
+/* Callback type passed in RETRO_ENVIRONMENT_SET_KEYBOARD_CALLBACK.
* Called by the frontend in response to keyboard events.
* down is set if the key is being pressed, or false if it is being released.
* keycode is the RETROK value of the char.
@@ -1533,17 +1705,17 @@ struct retro_hw_render_callback
* key_modifiers is a set of RETROKMOD values or'ed together.
*
* The pressed/keycode state can be indepedent of the character.
- * It is also possible that multiple characters are generated from a
+ * It is also possible that multiple characters are generated from a
* single keypress.
* Keycode events should be treated separately from character events.
* However, when possible, the frontend should try to synchronize these.
* If only a character is posted, keycode should be RETROK_UNKNOWN.
*
- * Similarily if only a keycode event is generated with no corresponding
+ * Similarily if only a keycode event is generated with no corresponding
* character, character should be 0.
*/
-typedef void (*retro_keyboard_event_t)(bool down, unsigned keycode,
- uint32_t character, uint16_t key_modifiers);
+typedef void (RETRO_CALLCONV *retro_keyboard_event_t)(bool down, unsigned keycode,
+ uint32_t character, uint16_t key_modifiers);
struct retro_keyboard_callback
{
@@ -1551,39 +1723,39 @@ struct retro_keyboard_callback
};
/* Callbacks for RETRO_ENVIRONMENT_SET_DISK_CONTROL_INTERFACE.
- * Should be set for implementations which can swap out multiple disk
+ * Should be set for implementations which can swap out multiple disk
* images in runtime.
*
* If the implementation can do this automatically, it should strive to do so.
* However, there are cases where the user must manually do so.
*
- * Overview: To swap a disk image, eject the disk image with
+ * Overview: To swap a disk image, eject the disk image with
* set_eject_state(true).
- * Set the disk index with set_image_index(index). Insert the disk again
+ * Set the disk index with set_image_index(index). Insert the disk again
* with set_eject_state(false).
*/
/* If ejected is true, "ejects" the virtual disk tray.
* When ejected, the disk image index can be set.
*/
-typedef bool (*retro_set_eject_state_t)(bool ejected);
+typedef bool (RETRO_CALLCONV *retro_set_eject_state_t)(bool ejected);
/* Gets current eject state. The initial state is 'not ejected'. */
-typedef bool (*retro_get_eject_state_t)(void);
+typedef bool (RETRO_CALLCONV *retro_get_eject_state_t)(void);
/* Gets current disk index. First disk is index 0.
* If return value is >= get_num_images(), no disk is currently inserted.
*/
-typedef unsigned(*retro_get_image_index_t)(void);
+typedef unsigned (RETRO_CALLCONV *retro_get_image_index_t)(void);
/* Sets image index. Can only be called when disk is ejected.
- * The implementation supports setting "no disk" by using an
+ * The implementation supports setting "no disk" by using an
* index >= get_num_images().
*/
-typedef bool (*retro_set_image_index_t)(unsigned index);
+typedef bool (RETRO_CALLCONV *retro_set_image_index_t)(unsigned index);
/* Gets total number of images which are available to use. */
-typedef unsigned(*retro_get_num_images_t)(void);
+typedef unsigned (RETRO_CALLCONV *retro_get_num_images_t)(void);
struct retro_game_info;
@@ -1591,22 +1763,22 @@ struct retro_game_info;
* Arguments to pass in info have same requirements as retro_load_game().
* Virtual disk tray must be ejected when calling this.
*
- * Replacing a disk image with info = NULL will remove the disk image
+ * Replacing a disk image with info = NULL will remove the disk image
* from the internal list.
* As a result, calls to get_image_index() can change.
*
- * E.g. replace_image_index(1, NULL), and previous get_image_index()
+ * E.g. replace_image_index(1, NULL), and previous get_image_index()
* returned 4 before.
* Index 1 will be removed, and the new index is 3.
*/
-typedef bool (*retro_replace_image_index_t)(unsigned index,
- const struct retro_game_info* info);
+typedef bool (RETRO_CALLCONV *retro_replace_image_index_t)(unsigned index,
+ const struct retro_game_info *info);
/* Adds a new valid index (get_num_images()) to the internal disk list.
* This will increment subsequent return values from get_num_images() by 1.
- * This image index cannot be used until a disk image has been set
+ * This image index cannot be used until a disk image has been set
* with replace_image_index. */
-typedef bool (*retro_add_image_index_t)(void);
+typedef bool (RETRO_CALLCONV *retro_add_image_index_t)(void);
struct retro_disk_control_callback
{
@@ -1635,7 +1807,7 @@ enum retro_pixel_format
/* RGB565, native endian.
* This pixel format is the recommended format to use if a 15/16-bit
- * format is desired as it is the pixel format that is typically
+ * format is desired as it is the pixel format that is typically
* available on a wide range of low-power devices.
*
* It is also natively supported in APIs like OpenGL ES. */
@@ -1647,7 +1819,7 @@ enum retro_pixel_format
struct retro_message
{
- const char* msg; /* Message to be displayed. */
+ const char *msg; /* Message to be displayed. */
unsigned frames; /* Duration in frames of message. */
};
@@ -1665,43 +1837,43 @@ struct retro_input_descriptor
/* Human readable description for parameters.
* The pointer must remain valid until
* retro_unload_game() is called. */
- const char* description;
+ const char *description;
};
struct retro_system_info
{
- /* All pointers are owned by libretro implementation, and pointers must
+ /* All pointers are owned by libretro implementation, and pointers must
* remain valid until retro_deinit() is called. */
- const char* library_name; /* Descriptive name of library. Should not
+ const char *library_name; /* Descriptive name of library. Should not
* contain any version numbers, etc. */
- const char* library_version; /* Descriptive version of core. */
+ const char *library_version; /* Descriptive version of core. */
- const char* valid_extensions; /* A string listing probably content
- * extensions the core will be able to
+ const char *valid_extensions; /* A string listing probably content
+ * extensions the core will be able to
* load, separated with pipe.
* I.e. "bin|rom|iso".
- * Typically used for a GUI to filter
+ * Typically used for a GUI to filter
* out extensions. */
- /* If true, retro_load_game() is guaranteed to provide a valid pathname
+ /* If true, retro_load_game() is guaranteed to provide a valid pathname
* in retro_game_info::path.
* ::data and ::size are both invalid.
*
- * If false, ::data and ::size are guaranteed to be valid, but ::path
+ * If false, ::data and ::size are guaranteed to be valid, but ::path
* might not be valid.
*
- * This is typically set to true for libretro implementations that must
+ * This is typically set to true for libretro implementations that must
* load from file.
- * Implementations should strive for setting this to false, as it allows
+ * Implementations should strive for setting this to false, as it allows
* the frontend to perform patching, etc. */
- bool need_fullpath;
+ bool need_fullpath;
- /* If true, the frontend is not allowed to extract any archives before
+ /* If true, the frontend is not allowed to extract any archives before
* loading the real content.
- * Necessary for certain libretro implementations that load games
+ * Necessary for certain libretro implementations that load games
* from zipped archives. */
- bool block_extract;
+ bool block_extract;
};
struct retro_game_geometry
@@ -1733,57 +1905,87 @@ struct retro_system_av_info
struct retro_variable
{
/* Variable to query in RETRO_ENVIRONMENT_GET_VARIABLE.
- * If NULL, obtains the complete environment string if more
+ * If NULL, obtains the complete environment string if more
* complex parsing is necessary.
- * The environment string is formatted as key-value pairs
+ * The environment string is formatted as key-value pairs
* delimited by semicolons as so:
* "key1=value1;key2=value2;..."
*/
- const char* key;
-
+ const char *key;
+
/* Value to be obtained. If key does not exist, it is set to NULL. */
- const char* value;
+ const char *value;
};
struct retro_game_info
{
- const char* path; /* Path to game, UTF-8 encoded.
+ const char *path; /* Path to game, UTF-8 encoded.
* Usually used as a reference.
* May be NULL if rom was loaded from stdin
- * or similar.
- * retro_system_info::need_fullpath guaranteed
+ * or similar.
+ * retro_system_info::need_fullpath guaranteed
* that this path is valid. */
- const void* data; /* Memory buffer of loaded game. Will be NULL
+ const void *data; /* Memory buffer of loaded game. Will be NULL
* if need_fullpath was set. */
size_t size; /* Size of memory buffer. */
- const char* meta; /* String of implementation specific meta-data. */
+ const char *meta; /* String of implementation specific meta-data. */
+};
+
+#define RETRO_MEMORY_ACCESS_WRITE (1 << 0)
+ /* The core will write to the buffer provided by retro_framebuffer::data. */
+#define RETRO_MEMORY_ACCESS_READ (1 << 1)
+ /* The core will read from retro_framebuffer::data. */
+#define RETRO_MEMORY_TYPE_CACHED (1 << 0)
+ /* The memory in data is cached.
+ * If not cached, random writes and/or reading from the buffer is expected to be very slow. */
+struct retro_framebuffer
+{
+ void *data; /* The framebuffer which the core can render into.
+ Set by frontend in GET_CURRENT_SOFTWARE_FRAMEBUFFER.
+ The initial contents of data are unspecified. */
+ unsigned width; /* The framebuffer width used by the core. Set by core. */
+ unsigned height; /* The framebuffer height used by the core. Set by core. */
+ size_t pitch; /* The number of bytes between the beginning of a scanline,
+ and beginning of the next scanline.
+ Set by frontend in GET_CURRENT_SOFTWARE_FRAMEBUFFER. */
+ enum retro_pixel_format format; /* The pixel format the core must use to render into data.
+ This format could differ from the format used in
+ SET_PIXEL_FORMAT.
+ Set by frontend in GET_CURRENT_SOFTWARE_FRAMEBUFFER. */
+
+ unsigned access_flags; /* How the core will access the memory in the framebuffer.
+ RETRO_MEMORY_ACCESS_* flags.
+ Set by core. */
+ unsigned memory_flags; /* Flags telling core how the memory has been mapped.
+ RETRO_MEMORY_TYPE_* flags.
+ Set by frontend in GET_CURRENT_SOFTWARE_FRAMEBUFFER. */
};
/* Callbacks */
-/* Environment callback. Gives implementations a way of performing
+/* Environment callback. Gives implementations a way of performing
* uncommon tasks. Extensible. */
-typedef bool (*retro_environment_t)(unsigned cmd, void* data);
+typedef bool (RETRO_CALLCONV *retro_environment_t)(unsigned cmd, void *data);
-/* Render a frame. Pixel format is 15-bit 0RGB1555 native endian
+/* Render a frame. Pixel format is 15-bit 0RGB1555 native endian
* unless changed (see RETRO_ENVIRONMENT_SET_PIXEL_FORMAT).
*
* Width and height specify dimensions of buffer.
* Pitch specifices length in bytes between two lines in buffer.
*
- * For performance reasons, it is highly recommended to have a frame
+ * For performance reasons, it is highly recommended to have a frame
* that is packed in memory, i.e. pitch == width * byte_per_pixel.
- * Certain graphic APIs, such as OpenGL ES, do not like textures
+ * Certain graphic APIs, such as OpenGL ES, do not like textures
* that are not packed in memory.
*/
-typedef void (*retro_video_refresh_t)(const void* data, unsigned width,
- unsigned height, size_t pitch);
+typedef void (RETRO_CALLCONV *retro_video_refresh_t)(const void *data, unsigned width,
+ unsigned height, size_t pitch);
-/* Renders a single audio frame. Should only be used if implementation
+/* Renders a single audio frame. Should only be used if implementation
* generates a single sample at a time.
* Format is signed 16-bit native endian.
*/
-typedef void (*retro_audio_sample_t)(int16_t left, int16_t right);
+typedef void (RETRO_CALLCONV *retro_audio_sample_t)(int16_t left, int16_t right);
/* Renders multiple audio frames in one go.
*
@@ -1791,113 +1993,113 @@ typedef void (*retro_audio_sample_t)(int16_t left, int16_t right);
* I.e. int16_t buf[4] = { l, r, l, r }; would be 2 frames.
* Only one of the audio callbacks must ever be used.
*/
-typedef size_t (*retro_audio_sample_batch_t)(const int16_t* data,
+typedef size_t (RETRO_CALLCONV *retro_audio_sample_batch_t)(const int16_t *data,
size_t frames);
/* Polls input. */
-typedef void (*retro_input_poll_t)(void);
+typedef void (RETRO_CALLCONV *retro_input_poll_t)(void);
-/* Queries for input for player 'port'. device will be masked with
+/* Queries for input for player 'port'. device will be masked with
* RETRO_DEVICE_MASK.
*
- * Specialization of devices such as RETRO_DEVICE_JOYPAD_MULTITAP that
+ * Specialization of devices such as RETRO_DEVICE_JOYPAD_MULTITAP that
* have been set with retro_set_controller_port_device()
* will still use the higher level RETRO_DEVICE_JOYPAD to request input.
*/
-typedef int16_t (*retro_input_state_t)(unsigned port, unsigned device,
- unsigned index, unsigned id);
+typedef int16_t (RETRO_CALLCONV *retro_input_state_t)(unsigned port, unsigned device,
+ unsigned index, unsigned id);
-/* Sets callbacks. retro_set_environment() is guaranteed to be called
+/* Sets callbacks. retro_set_environment() is guaranteed to be called
* before retro_init().
*
- * The rest of the set_* functions are guaranteed to have been called
+ * The rest of the set_* functions are guaranteed to have been called
* before the first call to retro_run() is made. */
-void retro_set_environment(retro_environment_t);
-void retro_set_video_refresh(retro_video_refresh_t);
-void retro_set_audio_sample(retro_audio_sample_t);
-void retro_set_audio_sample_batch(retro_audio_sample_batch_t);
-void retro_set_input_poll(retro_input_poll_t);
-void retro_set_input_state(retro_input_state_t);
+RETRO_API void retro_set_environment(retro_environment_t);
+RETRO_API void retro_set_video_refresh(retro_video_refresh_t);
+RETRO_API void retro_set_audio_sample(retro_audio_sample_t);
+RETRO_API void retro_set_audio_sample_batch(retro_audio_sample_batch_t);
+RETRO_API void retro_set_input_poll(retro_input_poll_t);
+RETRO_API void retro_set_input_state(retro_input_state_t);
/* Library global initialization/deinitialization. */
-void retro_init(void);
-void retro_deinit(void);
+RETRO_API void retro_init(void);
+RETRO_API void retro_deinit(void);
/* Must return RETRO_API_VERSION. Used to validate ABI compatibility
* when the API is revised. */
-unsigned retro_api_version(void);
+RETRO_API unsigned retro_api_version(void);
-/* Gets statically known system info. Pointers provided in *info
+/* Gets statically known system info. Pointers provided in *info
* must be statically allocated.
* Can be called at any time, even before retro_init(). */
-void retro_get_system_info(struct retro_system_info* info);
+RETRO_API void retro_get_system_info(struct retro_system_info *info);
/* Gets information about system audio/video timings and geometry.
* Can be called only after retro_load_game() has successfully completed.
- * NOTE: The implementation of this function might not initialize every
+ * NOTE: The implementation of this function might not initialize every
* variable if needed.
- * E.g. geom.aspect_ratio might not be initialized if core doesn't
+ * E.g. geom.aspect_ratio might not be initialized if core doesn't
* desire a particular aspect ratio. */
-void retro_get_system_av_info(struct retro_system_av_info* info);
+RETRO_API void retro_get_system_av_info(struct retro_system_av_info *info);
/* Sets device to be used for player 'port'.
- * By default, RETRO_DEVICE_JOYPAD is assumed to be plugged into all
+ * By default, RETRO_DEVICE_JOYPAD is assumed to be plugged into all
* available ports.
- * Setting a particular device type is not a guarantee that libretro cores
- * will only poll input based on that particular device type. It is only a
- * hint to the libretro core when a core cannot automatically detect the
- * appropriate input device type on its own. It is also relevant when a
+ * Setting a particular device type is not a guarantee that libretro cores
+ * will only poll input based on that particular device type. It is only a
+ * hint to the libretro core when a core cannot automatically detect the
+ * appropriate input device type on its own. It is also relevant when a
* core can change its behavior depending on device type. */
-void retro_set_controller_port_device(unsigned port, unsigned device);
+RETRO_API void retro_set_controller_port_device(unsigned port, unsigned device);
/* Resets the current game. */
-void retro_reset(void);
+RETRO_API void retro_reset(void);
/* Runs the game for one video frame.
* During retro_run(), input_poll callback must be called at least once.
- *
+ *
* If a frame is not rendered for reasons where a game "dropped" a frame,
- * this still counts as a frame, and retro_run() should explicitly dupe
+ * this still counts as a frame, and retro_run() should explicitly dupe
* a frame if GET_CAN_DUPE returns true.
* In this case, the video callback can take a NULL argument for data.
*/
-void retro_run(void);
+RETRO_API void retro_run(void);
-/* Returns the amount of data the implementation requires to serialize
+/* Returns the amount of data the implementation requires to serialize
* internal state (save states).
- * Between calls to retro_load_game() and retro_unload_game(), the
- * returned size is never allowed to be larger than a previous returned
+ * Between calls to retro_load_game() and retro_unload_game(), the
+ * returned size is never allowed to be larger than a previous returned
* value, to ensure that the frontend can allocate a save state buffer once.
*/
-size_t retro_serialize_size(void);
+RETRO_API size_t retro_serialize_size(void);
/* Serializes internal state. If failed, or size is lower than
* retro_serialize_size(), it should return false, true otherwise. */
-bool retro_serialize(void* data, size_t size);
-bool retro_unserialize(const void* data, size_t size);
+RETRO_API bool retro_serialize(void *data, size_t size);
+RETRO_API bool retro_unserialize(const void *data, size_t size);
-void retro_cheat_reset(void);
-void retro_cheat_set(unsigned index, bool enabled, const char* code);
+RETRO_API void retro_cheat_reset(void);
+RETRO_API void retro_cheat_set(unsigned index, bool enabled, const char *code);
/* Loads a game. */
-bool retro_load_game(const struct retro_game_info* game);
+RETRO_API bool retro_load_game(const struct retro_game_info *game);
/* Loads a "special" kind of game. Should not be used,
* except in extreme cases. */
-bool retro_load_game_special(
- unsigned game_type,
- const struct retro_game_info* info, size_t num_info
+RETRO_API bool retro_load_game_special(
+ unsigned game_type,
+ const struct retro_game_info *info, size_t num_info
);
/* Unloads a currently loaded game. */
-void retro_unload_game(void);
+RETRO_API void retro_unload_game(void);
/* Gets region of game. */
-unsigned retro_get_region(void);
+RETRO_API unsigned retro_get_region(void);
/* Gets region of memory. */
-void* retro_get_memory_data(unsigned id);
-size_t retro_get_memory_size(unsigned id);
+RETRO_API void *retro_get_memory_data(unsigned id);
+RETRO_API size_t retro_get_memory_size(unsigned id);
#ifdef __cplusplus
}