| Age | Commit message (Collapse) | Author |
|---|
|
|
|
- move mac, pc speaker and fm-towns ims sound drivers into separate directory
(AdLib and MT32/GM drivers are still too entangled with common code to be moved so easily, especially MT32/GM. It would require lots of changes to the common code and possibly to all engines using the MidiDriver class. So I leave that for now.)
|
|
(applies to MI2 and INDY4)
|
|
Paula low-pass filtering, as implemented by UAE.
The Amiga has two filtering circuits: a static RC filter
(only) on the A500, and an LED filter that can be enabled
or disabled dynamically.
By default, the Paula now doesn't apply the static RC
filter, but allows for enabling the LED filter (with
setAudioFilter()).
NOTE: At the moment, this code still uses floating point
arithmetics! It also calls tan() three times per
instantiation.
|
|
Fixes warning C4245: signed/unsigned mismatch
(seems in line with other decoders)
|
|
Fixes warning C4530: C++ exception handler used, but unwind semantics are not enabled
by disabling exceptions in the STL since ScummVM doesn't support them
|
|
This is another warning of the use of memset to clear a non-trivial
structure / class. This can be removed since the structure is cleared by
the constructor which will be called by the "new" so clearing this again
is redundant.
|
|
|
|
|
|
(no need to bother users with something that is actually intended behavior)
|
|
|
|
|
|
|
|
(just to remove some analysis warnings)
|
|
(also add some sanity checks and make some more adjustments for SCI audio driver)
|
|
(This didn't come up with the targets supported until now, but it does come up with SCI PC-98 music)
|
|
sort and rename some methods and vars and move as much as possible from public to private section
|
|
Apart from some basic cleanup this commit reverts a somewhat unfortunate design decision I made. The Kyra/Hof/Lol PC-98 sound drivers shouldn't inherit from the emulator. This commit separates the driver from the emulator putting some common interface in between. This should allow easier implementation of other PC-98 sound drivers.
|
|
Reported by angstsmurf.
|
|
No need to explicitly set it to 1.0. (There may have been in an
earlier version, to avoid any possible rounding error. But if so,
that reason is long gone.)
|
|
The high-resolution videos play back at much lower volume than the
original ones. This adds hard-coded values for how much to amplify
each cutscene. It's all done by ear, and it does introduce some
clipping, but I think it should be acceptable.
Of course, it could also be a problem with the audio decoder, so
this may be the wrong approach entirely.
|
|
|
|
It also hads further support for playing AIFF files. However, the
Blorb files for Lurking Horror & Sherlock on the if-archive website
don't seem to be valid AIFF files, so sound doesn't play using them
|
|
|
|
(This is basically an unnecessary emulation of a hardware limitation. EOB II will try to load approximately 70 KByte of samples for the outro sequence, which would lead to some missing sounds with the 64 Kbyte limit).
|
|
|
|
|
|
This code comes from clone2727's now defunct (?) ac3 branch.
|
|
Because scumm_strdup(), unlike strdup(), allocates strings with
new, not malloc(). (CID 1395228, 1395233, 1395235, 1395236)
|
|
The function signature for these functions was changed from (char *) to
(const char *) in the v1.1.7 release, so compiling against
Fluidsynth v1.1.6 or earlier requires the copying of the strings to
prevent compilation errors such as "error: invalid conversion from
'const char*' to 'char*'".
Normally, we would break compatibility with older versions as platforms
should be using the latest Fluidsynth v1.X release of v1.1.11.
However, since this is trivial to fix and prevents breakage for legacy
platforms, am restoring the string duplication with scumm_strdup().
Apart from this, we should look at the Fluidsynth v2.X releases
currently in RC testing as the API is now changed for this.
|
|
|
|
|
|
|
|
As discussed on the mailing list we should use title capitalization
only for push buttons and tabs and use sentence capitalization for
everything else.
|
|
|
|
|
|
|
|
|
|
The OPL2LPT is an OPL2 chip plugged on a parallel port. It is
write-only but otherwise acts as a classic AdLib. This commit adds
support for this device.
User is expected to have the right permissions on the parallel
port. By default, the first suitable parallel port is used. It is
possible to override that with the hidden configuration setting
"opl2lpt_parport".
It depends on the presence of the libieee1284 library which abstracts
a bit parallel port handling. An alternative would be to access
directly /dev/parportX on Linux. This would amount of code but it
would be Linux-only.
Tested with Indy 3 and SOMI.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
.period overflowed if .portaToNoteSpeed > .period in the else if case
|
|
This uses upstream commit 939cc986d9ffd044f8c6149361127ad5d94e430f
Closes gh-1091
|
|
|
|
The register keyword was deprecated from the C++11 standard,
<http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2014/n4193.html#809>,
and removed from the C++17 standard,
<http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2015/n4340>, so
cannot exist in a well-formed C++17 program.
It has never done anything in GCC
<https://gcc.gnu.org/ml/gcc/2010-05/msg00113.html>
and because of the way it is specified in the standard, it is “as
meaningful as whitespace”
<http://www.drdobbs.com/keywords-that-arent-or-comments-by-anoth/184403859>.
The one remaining use of the register keyword is in the DS backend,
where it is used to create a local register variable using the
non-standard GCC Extended Asm feature.
Closes gh-1079.
|
